include/asm-i386/io.h

   1 #ifndef _ASM_IO_H
   2 #define _ASM_IO_H
   3
   4 #include <linux/config.h>
   5 #include <linux/string.h>
   6 #include <linux/compiler.h>
   7
   8 /*
   9  * This file contains the definitions for the x86 IO instructions
  10  * inb/inw/inl/outb/outw/outl and the "string versions" of the same
  11  * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
  12  * versions of the single-IO instructions (inb_p/inw_p/..).
  13  *
  14  * This file is not meant to be obfuscating: it's just complicated
  15  * to (a) handle it all in a way that makes gcc able to optimize it
  16  * as well as possible and (b) trying to avoid writing the same thing
  17  * over and over again with slight variations and possibly making a
  18  * mistake somewhere.
  19  */
  20
  21 /*
  22  * Thanks to James van Artsdalen for a better timing-fix than
  23  * the two short jumps: using outb's to a nonexistent port seems
  24  * to guarantee better timings even on fast machines.
  25  *
  26  * On the other hand, I'd like to be sure of a non-existent port:
  27  * I feel a bit unsafe about using 0x80 (should be safe, though)
  28  *
  29  *              Linus
  30  */
  31
  32  /*
  33   *  Bit simplified and optimized by Jan Hubicka
  34   *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
  35   *
  36   *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
  37   *  isa_read[wl] and isa_write[wl] fixed
  38   *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  39   */
  40
  41 #define IO_SPACE_LIMIT 0xffff
  42
  43 #define XQUAD_PORTIO_BASE 0xfe400000
  44 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
  45
  46 #ifdef __KERNEL__
  47
  48 #include <asm-generic/iomap.h>
  49
  50 #include <linux/vmalloc.h>
  51
  52 /*
  53  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  54  * access
  55  */
  56 #define xlate_dev_mem_ptr(p)    __va(p)
  57
  58 /*
  59  * Convert a virtual cached pointer to an uncached pointer
  60  */
  61 #define xlate_dev_kmem_ptr(p)   p
  62
  63 /**
  64  *      virt_to_phys    -       map virtual addresses to physical
  65  *      @address: address to remap
  66  *
  67  *      The returned physical address is the physical (CPU) mapping for
  68  *      the memory address given. It is only valid to use this function on
  69  *      addresses directly mapped or allocated via kmalloc.
  70  *
  71  *      This function does not give bus mappings for DMA transfers. In
  72  *      almost all conceivable cases a device driver should not be using
  73  *      this function
  74  */
  75
  76 static inline unsigned long virt_to_phys(volatile void * address)
  77 {
  78         return __pa(address);
  79 }
  80
  81 /**
  82  *      phys_to_virt    -       map physical address to virtual
  83  *      @address: address to remap
  84  *
  85  *      The returned virtual address is a current CPU mapping for
  86  *      the memory address given. It is only valid to use this function on
  87  *      addresses that have a kernel mapping
  88  *
  89  *      This function does not handle bus mappings for DMA transfers. In
  90  *      almost all conceivable cases a device driver should not be using
  91  *      this function
  92  */
  93
  94 static inline void * phys_to_virt(unsigned long address)
  95 {
  96         return __va(address);
  97 }
  98
  99 /*
 100  * Change "struct page" to physical address.
 101  */
 102 #define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
 103
 104 extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
 105
 106 /**
 107  * ioremap     -   map bus memory into CPU space
 108  * @offset:    bus address of the memory
 109  * @size:      size of the resource to map
 110  *
 111  * ioremap performs a platform specific sequence of operations to
 112  * make bus memory CPU accessible via the readb/readw/readl/writeb/
 113  * writew/writel functions and the other mmio helpers. The returned
 114  * address is not guaranteed to be usable directly as a virtual
 115  * address.
 116  */
 117
 118 static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
 119 {
 120         return __ioremap(offset, size, 0);
 121 }
 122
 123 extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size);
 124 extern void iounmap(volatile void __iomem *addr);
 125
 126 /*
 127  * bt_ioremap() and bt_iounmap() are for temporary early boot-time
 128  * mappings, before the real ioremap() is functional.
 129  * A boot-time mapping is currently limited to at most 16 pages.
 130  */
 131 extern void *bt_ioremap(unsigned long offset, unsigned long size);
 132 extern void bt_iounmap(void *addr, unsigned long size);
 133
 134 /* Use early IO mappings for DMI because it's initialized early */
 135 #define dmi_ioremap bt_ioremap
 136 #define dmi_iounmap bt_iounmap
 137 #define dmi_alloc alloc_bootmem
 138
 139 /*
 140  * ISA I/O bus memory addresses are 1:1 with the physical address.
 141  */
 142 #define isa_virt_to_bus virt_to_phys
 143 #define isa_page_to_bus page_to_phys
 144 #define isa_bus_to_virt phys_to_virt
 145
 146 /*
 147  * However PCI ones are not necessarily 1:1 and therefore these interfaces
 148  * are forbidden in portable PCI drivers.
 149  *
 150  * Allow them on x86 for legacy drivers, though.
 151  */
 152 #define virt_to_bus virt_to_phys
 153 #define bus_to_virt phys_to_virt
 154
 155 /*
 156  * readX/writeX() are used to access memory mapped devices. On some
 157  * architectures the memory mapped IO stuff needs to be accessed
 158  * differently. On the x86 architecture, we just read/write the
 159  * memory location directly.
 160  */
 161
 162 static inline unsigned char readb(const volatile void __iomem *addr)
 163 {
 164         return *(volatile unsigned char __force *) addr;
 165 }
 166 static inline unsigned short readw(const volatile void __iomem *addr)
 167 {
 168         return *(volatile unsigned short __force *) addr;
 169 }
 170 static inline unsigned int readl(const volatile void __iomem *addr)
 171 {
 172         return *(volatile unsigned int __force *) addr;
 173 }
 174 #define readb_relaxed(addr) readb(addr)
 175 #define readw_relaxed(addr) readw(addr)
 176 #define readl_relaxed(addr) readl(addr)
 177 #define __raw_readb readb
 178 #define __raw_readw readw
 179 #define __raw_readl readl
 180
 181 static inline void writeb(unsigned char b, volatile void __iomem *addr)
 182 {
 183         *(volatile unsigned char __force *) addr = b;
 184 }
 185 static inline void writew(unsigned short b, volatile void __iomem *addr)
 186 {
 187         *(volatile unsigned short __force *) addr = b;
 188 }
 189 static inline void writel(unsigned int b, volatile void __iomem *addr)
 190 {
 191         *(volatile unsigned int __force *) addr = b;
 192 }
 193 #define __raw_writeb writeb
 194 #define __raw_writew writew
 195 #define __raw_writel writel
 196
 197 #define mmiowb()
 198
 199 static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
 200 {
 201         memset((void __force *) addr, val, count);
 202 }
 203 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
 204 {
 205         __memcpy(dst, (void __force *) src, count);
 206 }
 207 static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
 208 {
 209         __memcpy((void __force *) dst, src, count);
 210 }
 211
 212 /*
 213  * ISA space is 'always mapped' on a typical x86 system, no need to
 214  * explicitly ioremap() it. The fact that the ISA IO space is mapped
 215  * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
 216  * are physical addresses. The following constant pointer can be
 217  * used as the IO-area pointer (it can be iounmapped as well, so the
 218  * analogy with PCI is quite large):
 219  */
 220 #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
 221
 222 /*
 223  * Again, i386 does not require mem IO specific function.
 224  */
 225
 226 #define eth_io_copy_and_sum(a,b,c,d)            eth_copy_and_sum((a),(void __force *)(b),(c),(d))
 227
 228 /**
 229  *      check_signature         -       find BIOS signatures
 230  *      @io_addr: mmio address to check
 231  *      @signature:  signature block
 232  *      @length: length of signature
 233  *
 234  *      Perform a signature comparison with the mmio address io_addr. This
 235  *      address should have been obtained by ioremap.
 236  *      Returns 1 on a match.
 237  */
 238
 239 static inline int check_signature(volatile void __iomem * io_addr,
 240         const unsigned char *signature, int length)
 241 {
 242         int retval = 0;
 243         do {
 244                 if (readb(io_addr) != *signature)
 245                         goto out;
 246                 io_addr++;
 247                 signature++;
 248                 length--;
 249         } while (length);
 250         retval = 1;
 251 out:
 252         return retval;
 253 }
 254
 255 /*
 256  *      Cache management
 257  *
 258  *      This needed for two cases
 259  *      1. Out of order aware processors
 260  *      2. Accidentally out of order processors (PPro errata #51)
 261  */
 262
 263 #if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
 264
 265 static inline void flush_write_buffers(void)
 266 {
 267         __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory");
 268 }
 269
 270 #define dma_cache_inv(_start,_size)             flush_write_buffers()
 271 #define dma_cache_wback(_start,_size)           flush_write_buffers()
 272 #define dma_cache_wback_inv(_start,_size)       flush_write_buffers()
 273
 274 #else
 275
 276 /* Nothing to do */
 277
 278 #define dma_cache_inv(_start,_size)             do { } while (0)
 279 #define dma_cache_wback(_start,_size)           do { } while (0)
 280 #define dma_cache_wback_inv(_start,_size)       do { } while (0)
 281 #define flush_write_buffers()
 282
 283 #endif
 284
 285 #endif /* __KERNEL__ */
 286
 287 #ifdef SLOW_IO_BY_JUMPING
 288 #define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:"
 289 #else
 290 #define __SLOW_DOWN_IO "outb %%al,$0x80;"
 291 #endif
 292
 293 static inline void slow_down_io(void) {
 294         __asm__ __volatile__(
 295                 __SLOW_DOWN_IO
 296 #ifdef REALLY_SLOW_IO
 297                 __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
 298 #endif
 299                 : : );
 300 }
 301
 302 #ifdef CONFIG_X86_NUMAQ
 303 extern void *xquad_portio;    /* Where the IO area was mapped */
 304 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 305 #define __BUILDIO(bwl,bw,type) \
 306 static inline void out##bwl##_quad(unsigned type value, int port, int quad) { \
 307         if (xquad_portio) \
 308                 write##bwl(value, XQUAD_PORT_ADDR(port, quad)); \
 309         else \
 310                 out##bwl##_local(value, port); \
 311 } \
 312 static inline void out##bwl(unsigned type value, int port) { \
 313         out##bwl##_quad(value, port, 0); \
 314 } \
 315 static inline unsigned type in##bwl##_quad(int port, int quad) { \
 316         if (xquad_portio) \
 317                 return read##bwl(XQUAD_PORT_ADDR(port, quad)); \
 318         else \
 319                 return in##bwl##_local(port); \
 320 } \
 321 static inline unsigned type in##bwl(int port) { \
 322         return in##bwl##_quad(port, 0); \
 323 }
 324 #else
 325 #define __BUILDIO(bwl,bw,type) \
 326 static inline void out##bwl(unsigned type value, int port) { \
 327         out##bwl##_local(value, port); \
 328 } \
 329 static inline unsigned type in##bwl(int port) { \
 330         return in##bwl##_local(port); \
 331 }
 332 #endif
 333
 334
 335 #define BUILDIO(bwl,bw,type) \
 336 static inline void out##bwl##_local(unsigned type value, int port) { \
 337         __asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \
 338 } \
 339 static inline unsigned type in##bwl##_local(int port) { \
 340         unsigned type value; \
 341         __asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \
 342         return value; \
 343 } \
 344 static inline void out##bwl##_local_p(unsigned type value, int port) { \
 345         out##bwl##_local(value, port); \
 346         slow_down_io(); \
 347 } \
 348 static inline unsigned type in##bwl##_local_p(int port) { \
 349         unsigned type value = in##bwl##_local(port); \
 350         slow_down_io(); \
 351         return value; \
 352 } \
 353 __BUILDIO(bwl,bw,type) \
 354 static inline void out##bwl##_p(unsigned type value, int port) { \
 355         out##bwl(value, port); \
 356         slow_down_io(); \
 357 } \
 358 static inline unsigned type in##bwl##_p(int port) { \
 359         unsigned type value = in##bwl(port); \
 360         slow_down_io(); \
 361         return value; \
 362 } \
 363 static inline void outs##bwl(int port, const void *addr, unsigned long count) { \
 364         __asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \
 365 } \
 366 static inline void ins##bwl(int port, void *addr, unsigned long count) { \
 367         __asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \
 368 }
 369
 370 BUILDIO(b,b,char)
 371 BUILDIO(w,w,short)
 372 BUILDIO(l,,int)
 373
 374 #endif