arch/x86/include/asm/irq_vectors.h

   1 #ifndef _ASM_X86_IRQ_VECTORS_H
   2 #define _ASM_X86_IRQ_VECTORS_H
   3
   4 /*
   5  * Linux IRQ vector layout.
   6  *
   7  * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
   8  * be defined by Linux. They are used as a jump table by the CPU when a
   9  * given vector is triggered - by a CPU-external, CPU-internal or
  10  * software-triggered event.
  11  *
  12  * Linux sets the kernel code address each entry jumps to early during
  13  * bootup, and never changes them. This is the general layout of the
  14  * IDT entries:
  15  *
  16  *  Vectors   0 ...  31 : system traps and exceptions - hardcoded events
  17  *  Vectors  32 ... 127 : device interrupts
  18  *  Vector  128         : legacy int80 syscall interface
  19  *  Vectors 129 ... 237 : device interrupts
  20  *  Vectors 238 ... 255 : special interrupts
  21  *
  22  * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
  23  *
  24  * This file enumerates the exact layout of them:
  25  */
  26
  27 #define NMI_VECTOR                      0x02
  28
  29 /*
  30  * IDT vectors usable for external interrupt sources start
  31  * at 0x20:
  32  */
  33 #define FIRST_EXTERNAL_VECTOR           0x20
  34
  35 #ifdef CONFIG_X86_32
  36 # define SYSCALL_VECTOR                 0x80
  37 #else
  38 # define IA32_SYSCALL_VECTOR            0x80
  39 #endif
  40
  41 /*
  42  * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
  43  * cleanup after irq migration.
  44  */
  45 #define IRQ_MOVE_CLEANUP_VECTOR         FIRST_EXTERNAL_VECTOR
  46
  47 /*
  48  * Vectors 0x30-0x3f are used for ISA interrupts.
  49  */
  50 #define IRQ0_VECTOR                     (FIRST_EXTERNAL_VECTOR + 0x10)
  51
  52 #define IRQ1_VECTOR                     (IRQ0_VECTOR +  1)
  53 #define IRQ2_VECTOR                     (IRQ0_VECTOR +  2)
  54 #define IRQ3_VECTOR                     (IRQ0_VECTOR +  3)
  55 #define IRQ4_VECTOR                     (IRQ0_VECTOR +  4)
  56 #define IRQ5_VECTOR                     (IRQ0_VECTOR +  5)
  57 #define IRQ6_VECTOR                     (IRQ0_VECTOR +  6)
  58 #define IRQ7_VECTOR                     (IRQ0_VECTOR +  7)
  59 #define IRQ8_VECTOR                     (IRQ0_VECTOR +  8)
  60 #define IRQ9_VECTOR                     (IRQ0_VECTOR +  9)
  61 #define IRQ10_VECTOR                    (IRQ0_VECTOR + 10)
  62 #define IRQ11_VECTOR                    (IRQ0_VECTOR + 11)
  63 #define IRQ12_VECTOR                    (IRQ0_VECTOR + 12)
  64 #define IRQ13_VECTOR                    (IRQ0_VECTOR + 13)
  65 #define IRQ14_VECTOR                    (IRQ0_VECTOR + 14)
  66 #define IRQ15_VECTOR                    (IRQ0_VECTOR + 15)
  67
  68 /*
  69  * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
  70  *
  71  *  some of the following vectors are 'rare', they are merged
  72  *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
  73  *  TLB, reschedule and local APIC vectors are performance-critical.
  74  */
  75
  76 #define SPURIOUS_APIC_VECTOR            0xff
  77 /*
  78  * Sanity check
  79  */
  80 #if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
  81 # error SPURIOUS_APIC_VECTOR definition error
  82 #endif
  83
  84 #define ERROR_APIC_VECTOR               0xfe
  85 #define RESCHEDULE_VECTOR               0xfd
  86 #define CALL_FUNCTION_VECTOR            0xfc
  87 #define CALL_FUNCTION_SINGLE_VECTOR     0xfb
  88 #define THERMAL_APIC_VECTOR             0xfa
  89
  90 #ifdef CONFIG_X86_32
  91 /* 0xf8 - 0xf9 : free */
  92 #else
  93 # define THRESHOLD_APIC_VECTOR          0xf9
  94 # define UV_BAU_MESSAGE                 0xf8
  95 #endif
  96
  97 /* f0-f7 used for spreading out TLB flushes: */
  98 #define INVALIDATE_TLB_VECTOR_END       0xf7
  99 #define INVALIDATE_TLB_VECTOR_START     0xf0
 100 #define NUM_INVALIDATE_TLB_VECTORS         8
 101
 102 /*
 103  * Local APIC timer IRQ vector is on a different priority level,
 104  * to work around the 'lost local interrupt if more than 2 IRQ
 105  * sources per level' errata.
 106  */
 107 #define LOCAL_TIMER_VECTOR              0xef
 108
 109 /*
 110  * Performance monitoring interrupt vector:
 111  */
 112 #define LOCAL_PERF_VECTOR               0xee
 113
 114 /*
 115  * First APIC vector available to drivers: (vectors 0x30-0xee) we
 116  * start at 0x31(0x41) to spread out vectors evenly between priority
 117  * levels. (0x80 is the syscall vector)
 118  */
 119 #define FIRST_DEVICE_VECTOR             (IRQ15_VECTOR + 2)
 120
 121 #define NR_VECTORS                       256
 122
 123 #define FPU_IRQ                           13
 124
 125 #define FIRST_VM86_IRQ                     3
 126 #define LAST_VM86_IRQ                     15
 127 #define invalid_vm86_irq(irq)           ((irq) < 3 || (irq) > 15)
 128
 129 #define NR_IRQS_LEGACY                    16
 130
 131 #ifdef CONFIG_X86_IO_APIC
 132 # ifndef CONFIG_SPARSE_IRQ
 133 #  if NR_CPUS < MAX_IO_APICS
 134 #   define NR_IRQS                      (NR_VECTORS + (32 * NR_CPUS))
 135 #  else
 136 #   define NR_IRQS                      (NR_VECTORS + (32 * MAX_IO_APICS))
 137 #  endif
 138 # else
 139 #  define NR_IRQS                                       \
 140         ((8 * NR_CPUS) > (32 * MAX_IO_APICS) ?          \
 141                 (NR_VECTORS + (8 * NR_CPUS)) :          \
 142                 (NR_VECTORS + (32 * MAX_IO_APICS)))
 143 # endif
 144 #else /* !CONFIG_X86_IO_APIC: */
 145 # define NR_IRQS                        16
 146 #endif
 147
 148 #endif /* _ASM_X86_IRQ_VECTORS_H */