PNP: centralize resource option allocations
[linux-2.6/mini2440.git] / arch / mips / jazz / setup.c
blobf60524e8bc44a7d1e74e1a9455749b811ecf3326
1 /*
2 * Setup pointers to hardware-dependent routines.
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
9 * Copyright (C) 2001 MIPS Technologies, Inc.
10 * Copyright (C) 2007 by Thomas Bogendoerfer
12 #include <linux/eisa.h>
13 #include <linux/hdreg.h>
14 #include <linux/init.h>
15 #include <linux/ioport.h>
16 #include <linux/sched.h>
17 #include <linux/interrupt.h>
18 #include <linux/mm.h>
19 #include <linux/console.h>
20 #include <linux/fb.h>
21 #include <linux/ide.h>
22 #include <linux/pm.h>
23 #include <linux/screen_info.h>
24 #include <linux/platform_device.h>
25 #include <linux/serial_8250.h>
27 #include <asm/bootinfo.h>
28 #include <asm/irq.h>
29 #include <asm/jazz.h>
30 #include <asm/jazzdma.h>
31 #include <asm/reboot.h>
32 #include <asm/io.h>
33 #include <asm/pgtable.h>
34 #include <asm/time.h>
35 #include <asm/traps.h>
36 #include <asm/mc146818-time.h>
38 extern asmlinkage void jazz_handle_int(void);
40 extern void jazz_machine_restart(char *command);
42 static struct resource jazz_io_resources[] = {
44 .start = 0x00,
45 .end = 0x1f,
46 .name = "dma1",
47 .flags = IORESOURCE_BUSY
48 }, {
49 .start = 0x40,
50 .end = 0x5f,
51 .name = "timer",
52 .flags = IORESOURCE_BUSY
53 }, {
54 .start = 0x80,
55 .end = 0x8f,
56 .name = "dma page reg",
57 .flags = IORESOURCE_BUSY
58 }, {
59 .start = 0xc0,
60 .end = 0xdf,
61 .name = "dma2",
62 .flags = IORESOURCE_BUSY
66 void __init plat_mem_setup(void)
68 int i;
70 /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
71 add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
72 /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
73 add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
74 /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
75 add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
77 set_io_port_base(JAZZ_PORT_BASE);
78 #ifdef CONFIG_EISA
79 EISA_bus = 1;
80 #endif
82 /* request I/O space for devices used on all i[345]86 PCs */
83 for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
84 request_resource(&ioport_resource, jazz_io_resources + i);
86 /* The RTC is outside the port address space */
88 _machine_restart = jazz_machine_restart;
90 #ifdef CONFIG_VT
91 screen_info = (struct screen_info) {
92 0, 0, /* orig-x, orig-y */
93 0, /* unused */
94 0, /* orig_video_page */
95 0, /* orig_video_mode */
96 160, /* orig_video_cols */
97 0, 0, 0, /* unused, ega_bx, unused */
98 64, /* orig_video_lines */
99 0, /* orig_video_isVGA */
100 16 /* orig_video_points */
102 #endif
104 add_preferred_console("ttyS", 0, "9600");
107 #ifdef CONFIG_OLIVETTI_M700
108 #define UART_CLK 1843200
109 #else
110 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
111 exactly which ones ... XXX */
112 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
113 #endif
115 #define MEMPORT(_base, _irq) \
117 .mapbase = (_base), \
118 .membase = (void *)(_base), \
119 .irq = (_irq), \
120 .uartclk = UART_CLK, \
121 .iotype = UPIO_MEM, \
122 .flags = UPF_BOOT_AUTOCONF, \
125 static struct plat_serial8250_port jazz_serial_data[] = {
126 MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
127 MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
128 { },
131 static struct platform_device jazz_serial8250_device = {
132 .name = "serial8250",
133 .id = PLAT8250_DEV_PLATFORM,
134 .dev = {
135 .platform_data = jazz_serial_data,
139 static struct resource jazz_esp_rsrc[] = {
141 .start = JAZZ_SCSI_BASE,
142 .end = JAZZ_SCSI_BASE + 31,
143 .flags = IORESOURCE_MEM
146 .start = JAZZ_SCSI_DMA,
147 .end = JAZZ_SCSI_DMA,
148 .flags = IORESOURCE_MEM
151 .start = JAZZ_SCSI_IRQ,
152 .end = JAZZ_SCSI_IRQ,
153 .flags = IORESOURCE_IRQ
157 static struct platform_device jazz_esp_pdev = {
158 .name = "jazz_esp",
159 .num_resources = ARRAY_SIZE(jazz_esp_rsrc),
160 .resource = jazz_esp_rsrc
163 static struct resource jazz_sonic_rsrc[] = {
165 .start = JAZZ_ETHERNET_BASE,
166 .end = JAZZ_ETHERNET_BASE + 0xff,
167 .flags = IORESOURCE_MEM
170 .start = JAZZ_ETHERNET_IRQ,
171 .end = JAZZ_ETHERNET_IRQ,
172 .flags = IORESOURCE_IRQ
176 static struct platform_device jazz_sonic_pdev = {
177 .name = "jazzsonic",
178 .num_resources = ARRAY_SIZE(jazz_sonic_rsrc),
179 .resource = jazz_sonic_rsrc
182 static struct resource jazz_cmos_rsrc[] = {
184 .start = 0x70,
185 .end = 0x71,
186 .flags = IORESOURCE_IO
189 .start = 8,
190 .end = 8,
191 .flags = IORESOURCE_IRQ
195 static struct platform_device jazz_cmos_pdev = {
196 .name = "rtc_cmos",
197 .num_resources = ARRAY_SIZE(jazz_cmos_rsrc),
198 .resource = jazz_cmos_rsrc
201 static struct platform_device pcspeaker_pdev = {
202 .name = "pcspkr",
203 .id = -1,
206 static int __init jazz_setup_devinit(void)
208 platform_device_register(&jazz_serial8250_device);
209 platform_device_register(&jazz_esp_pdev);
210 platform_device_register(&jazz_sonic_pdev);
211 platform_device_register(&jazz_cmos_pdev);
212 platform_device_register(&pcspeaker_pdev);
214 return 0;
217 device_initcall(jazz_setup_devinit);