[TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb
[linux-2.6/mini2440.git] / net / ipv4 / tcp_cubic.c
blob3aa0b23c1ea0293c7d68e65f4bf568b3c18b261e
1 /*
2 * TCP CUBIC: Binary Increase Congestion control for TCP v2.1
4 * This is from the implementation of CUBIC TCP in
5 * Injong Rhee, Lisong Xu.
6 * "CUBIC: A New TCP-Friendly High-Speed TCP Variant
7 * in PFLDnet 2005
8 * Available from:
9 * http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf
11 * Unless CUBIC is enabled and congestion window is large
12 * this behaves the same as the original Reno.
15 #include <linux/mm.h>
16 #include <linux/module.h>
17 #include <net/tcp.h>
18 #include <asm/div64.h>
20 #define BICTCP_BETA_SCALE 1024 /* Scale factor beta calculation
21 * max_cwnd = snd_cwnd * beta
23 #define BICTCP_B 4 /*
24 * In binary search,
25 * go to point (max+min)/N
27 #define BICTCP_HZ 10 /* BIC HZ 2^10 = 1024 */
29 static int fast_convergence __read_mostly = 1;
30 static int max_increment __read_mostly = 16;
31 static int beta __read_mostly = 819; /* = 819/1024 (BICTCP_BETA_SCALE) */
32 static int initial_ssthresh __read_mostly;
33 static int bic_scale __read_mostly = 41;
34 static int tcp_friendliness __read_mostly = 1;
36 static u32 cube_rtt_scale __read_mostly;
37 static u32 beta_scale __read_mostly;
38 static u64 cube_factor __read_mostly;
40 /* Note parameters that are used for precomputing scale factors are read-only */
41 module_param(fast_convergence, int, 0644);
42 MODULE_PARM_DESC(fast_convergence, "turn on/off fast convergence");
43 module_param(max_increment, int, 0644);
44 MODULE_PARM_DESC(max_increment, "Limit on increment allowed during binary search");
45 module_param(beta, int, 0444);
46 MODULE_PARM_DESC(beta, "beta for multiplicative increase");
47 module_param(initial_ssthresh, int, 0644);
48 MODULE_PARM_DESC(initial_ssthresh, "initial value of slow start threshold");
49 module_param(bic_scale, int, 0444);
50 MODULE_PARM_DESC(bic_scale, "scale (scaled by 1024) value for bic function (bic_scale/1024)");
51 module_param(tcp_friendliness, int, 0644);
52 MODULE_PARM_DESC(tcp_friendliness, "turn on/off tcp friendliness");
54 /* BIC TCP Parameters */
55 struct bictcp {
56 u32 cnt; /* increase cwnd by 1 after ACKs */
57 u32 last_max_cwnd; /* last maximum snd_cwnd */
58 u32 loss_cwnd; /* congestion window at last loss */
59 u32 last_cwnd; /* the last snd_cwnd */
60 u32 last_time; /* time when updated last_cwnd */
61 u32 bic_origin_point;/* origin point of bic function */
62 u32 bic_K; /* time to origin point from the beginning of the current epoch */
63 u32 delay_min; /* min delay */
64 u32 epoch_start; /* beginning of an epoch */
65 u32 ack_cnt; /* number of acks */
66 u32 tcp_cwnd; /* estimated tcp cwnd */
67 #define ACK_RATIO_SHIFT 4
68 u32 delayed_ack; /* estimate the ratio of Packets/ACKs << 4 */
71 static inline void bictcp_reset(struct bictcp *ca)
73 ca->cnt = 0;
74 ca->last_max_cwnd = 0;
75 ca->loss_cwnd = 0;
76 ca->last_cwnd = 0;
77 ca->last_time = 0;
78 ca->bic_origin_point = 0;
79 ca->bic_K = 0;
80 ca->delay_min = 0;
81 ca->epoch_start = 0;
82 ca->delayed_ack = 2 << ACK_RATIO_SHIFT;
83 ca->ack_cnt = 0;
84 ca->tcp_cwnd = 0;
87 static void bictcp_init(struct sock *sk)
89 bictcp_reset(inet_csk_ca(sk));
90 if (initial_ssthresh)
91 tcp_sk(sk)->snd_ssthresh = initial_ssthresh;
94 /* calculate the cubic root of x using a table lookup followed by one
95 * Newton-Raphson iteration.
96 * Avg err ~= 0.195%
98 static u32 cubic_root(u64 a)
100 u32 x, b, shift;
102 * cbrt(x) MSB values for x MSB values in [0..63].
103 * Precomputed then refined by hand - Willy Tarreau
105 * For x in [0..63],
106 * v = cbrt(x << 18) - 1
107 * cbrt(x) = (v[x] + 10) >> 6
109 static const u8 v[] = {
110 /* 0x00 */ 0, 54, 54, 54, 118, 118, 118, 118,
111 /* 0x08 */ 123, 129, 134, 138, 143, 147, 151, 156,
112 /* 0x10 */ 157, 161, 164, 168, 170, 173, 176, 179,
113 /* 0x18 */ 181, 185, 187, 190, 192, 194, 197, 199,
114 /* 0x20 */ 200, 202, 204, 206, 209, 211, 213, 215,
115 /* 0x28 */ 217, 219, 221, 222, 224, 225, 227, 229,
116 /* 0x30 */ 231, 232, 234, 236, 237, 239, 240, 242,
117 /* 0x38 */ 244, 245, 246, 248, 250, 251, 252, 254,
120 b = fls64(a);
121 if (b < 7) {
122 /* a in [0..63] */
123 return ((u32)v[(u32)a] + 35) >> 6;
126 b = ((b * 84) >> 8) - 1;
127 shift = (a >> (b * 3));
129 x = ((u32)(((u32)v[shift] + 10) << b)) >> 6;
132 * Newton-Raphson iteration
134 * x = ( 2 * x + a / x ) / 3
135 * k+1 k k
137 x = (2 * x + (u32)div64_64(a, (u64)x * (u64)(x - 1)));
138 x = ((x * 341) >> 10);
139 return x;
143 * Compute congestion window to use.
145 static inline void bictcp_update(struct bictcp *ca, u32 cwnd)
147 u64 offs;
148 u32 delta, t, bic_target, min_cnt, max_cnt;
150 ca->ack_cnt++; /* count the number of ACKs */
152 if (ca->last_cwnd == cwnd &&
153 (s32)(tcp_time_stamp - ca->last_time) <= HZ / 32)
154 return;
156 ca->last_cwnd = cwnd;
157 ca->last_time = tcp_time_stamp;
159 if (ca->epoch_start == 0) {
160 ca->epoch_start = tcp_time_stamp; /* record the beginning of an epoch */
161 ca->ack_cnt = 1; /* start counting */
162 ca->tcp_cwnd = cwnd; /* syn with cubic */
164 if (ca->last_max_cwnd <= cwnd) {
165 ca->bic_K = 0;
166 ca->bic_origin_point = cwnd;
167 } else {
168 /* Compute new K based on
169 * (wmax-cwnd) * (srtt>>3 / HZ) / c * 2^(3*bictcp_HZ)
171 ca->bic_K = cubic_root(cube_factor
172 * (ca->last_max_cwnd - cwnd));
173 ca->bic_origin_point = ca->last_max_cwnd;
177 /* cubic function - calc*/
178 /* calculate c * time^3 / rtt,
179 * while considering overflow in calculation of time^3
180 * (so time^3 is done by using 64 bit)
181 * and without the support of division of 64bit numbers
182 * (so all divisions are done by using 32 bit)
183 * also NOTE the unit of those veriables
184 * time = (t - K) / 2^bictcp_HZ
185 * c = bic_scale >> 10
186 * rtt = (srtt >> 3) / HZ
187 * !!! The following code does not have overflow problems,
188 * if the cwnd < 1 million packets !!!
191 /* change the unit from HZ to bictcp_HZ */
192 t = ((tcp_time_stamp + (ca->delay_min>>3) - ca->epoch_start)
193 << BICTCP_HZ) / HZ;
195 if (t < ca->bic_K) /* t - K */
196 offs = ca->bic_K - t;
197 else
198 offs = t - ca->bic_K;
200 /* c/rtt * (t-K)^3 */
201 delta = (cube_rtt_scale * offs * offs * offs) >> (10+3*BICTCP_HZ);
202 if (t < ca->bic_K) /* below origin*/
203 bic_target = ca->bic_origin_point - delta;
204 else /* above origin*/
205 bic_target = ca->bic_origin_point + delta;
207 /* cubic function - calc bictcp_cnt*/
208 if (bic_target > cwnd) {
209 ca->cnt = cwnd / (bic_target - cwnd);
210 } else {
211 ca->cnt = 100 * cwnd; /* very small increment*/
214 if (ca->delay_min > 0) {
215 /* max increment = Smax * rtt / 0.1 */
216 min_cnt = (cwnd * HZ * 8)/(10 * max_increment * ca->delay_min);
218 /* use concave growth when the target is above the origin */
219 if (ca->cnt < min_cnt && t >= ca->bic_K)
220 ca->cnt = min_cnt;
223 /* slow start and low utilization */
224 if (ca->loss_cwnd == 0) /* could be aggressive in slow start */
225 ca->cnt = 50;
227 /* TCP Friendly */
228 if (tcp_friendliness) {
229 u32 scale = beta_scale;
230 delta = (cwnd * scale) >> 3;
231 while (ca->ack_cnt > delta) { /* update tcp cwnd */
232 ca->ack_cnt -= delta;
233 ca->tcp_cwnd++;
236 if (ca->tcp_cwnd > cwnd){ /* if bic is slower than tcp */
237 delta = ca->tcp_cwnd - cwnd;
238 max_cnt = cwnd / delta;
239 if (ca->cnt > max_cnt)
240 ca->cnt = max_cnt;
244 ca->cnt = (ca->cnt << ACK_RATIO_SHIFT) / ca->delayed_ack;
245 if (ca->cnt == 0) /* cannot be zero */
246 ca->cnt = 1;
249 static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
251 struct tcp_sock *tp = tcp_sk(sk);
252 struct bictcp *ca = inet_csk_ca(sk);
254 if (!tcp_is_cwnd_limited(sk, in_flight))
255 return;
257 if (tp->snd_cwnd <= tp->snd_ssthresh)
258 tcp_slow_start(tp);
259 else {
260 bictcp_update(ca, tp->snd_cwnd);
262 /* In dangerous area, increase slowly.
263 * In theory this is tp->snd_cwnd += 1 / tp->snd_cwnd
265 if (tp->snd_cwnd_cnt >= ca->cnt) {
266 if (tp->snd_cwnd < tp->snd_cwnd_clamp)
267 tp->snd_cwnd++;
268 tp->snd_cwnd_cnt = 0;
269 } else
270 tp->snd_cwnd_cnt++;
275 static u32 bictcp_recalc_ssthresh(struct sock *sk)
277 const struct tcp_sock *tp = tcp_sk(sk);
278 struct bictcp *ca = inet_csk_ca(sk);
280 ca->epoch_start = 0; /* end of epoch */
282 /* Wmax and fast convergence */
283 if (tp->snd_cwnd < ca->last_max_cwnd && fast_convergence)
284 ca->last_max_cwnd = (tp->snd_cwnd * (BICTCP_BETA_SCALE + beta))
285 / (2 * BICTCP_BETA_SCALE);
286 else
287 ca->last_max_cwnd = tp->snd_cwnd;
289 ca->loss_cwnd = tp->snd_cwnd;
291 return max((tp->snd_cwnd * beta) / BICTCP_BETA_SCALE, 2U);
294 static u32 bictcp_undo_cwnd(struct sock *sk)
296 struct bictcp *ca = inet_csk_ca(sk);
298 return max(tcp_sk(sk)->snd_cwnd, ca->last_max_cwnd);
301 static void bictcp_state(struct sock *sk, u8 new_state)
303 if (new_state == TCP_CA_Loss)
304 bictcp_reset(inet_csk_ca(sk));
307 /* Track delayed acknowledgment ratio using sliding window
308 * ratio = (15*ratio + sample) / 16
310 static void bictcp_acked(struct sock *sk, u32 cnt, s32 rtt_us)
312 const struct inet_connection_sock *icsk = inet_csk(sk);
313 struct bictcp *ca = inet_csk_ca(sk);
314 u32 delay;
316 if (icsk->icsk_ca_state == TCP_CA_Open) {
317 cnt -= ca->delayed_ack >> ACK_RATIO_SHIFT;
318 ca->delayed_ack += cnt;
321 /* Some calls are for duplicates without timetamps */
322 if (rtt_us < 0)
323 return;
325 /* Discard delay samples right after fast recovery */
326 if ((s32)(tcp_time_stamp - ca->epoch_start) < HZ)
327 return;
329 delay = usecs_to_jiffies(rtt_us) << 3;
330 if (delay == 0)
331 delay = 1;
333 /* first time call or link delay decreases */
334 if (ca->delay_min == 0 || ca->delay_min > delay)
335 ca->delay_min = delay;
338 static struct tcp_congestion_ops cubictcp = {
339 .init = bictcp_init,
340 .ssthresh = bictcp_recalc_ssthresh,
341 .cong_avoid = bictcp_cong_avoid,
342 .set_state = bictcp_state,
343 .undo_cwnd = bictcp_undo_cwnd,
344 .pkts_acked = bictcp_acked,
345 .owner = THIS_MODULE,
346 .name = "cubic",
349 static int __init cubictcp_register(void)
351 BUILD_BUG_ON(sizeof(struct bictcp) > ICSK_CA_PRIV_SIZE);
353 /* Precompute a bunch of the scaling factors that are used per-packet
354 * based on SRTT of 100ms
357 beta_scale = 8*(BICTCP_BETA_SCALE+beta)/ 3 / (BICTCP_BETA_SCALE - beta);
359 cube_rtt_scale = (bic_scale * 10); /* 1024*c/rtt */
361 /* calculate the "K" for (wmax-cwnd) = c/rtt * K^3
362 * so K = cubic_root( (wmax-cwnd)*rtt/c )
363 * the unit of K is bictcp_HZ=2^10, not HZ
365 * c = bic_scale >> 10
366 * rtt = 100ms
368 * the following code has been designed and tested for
369 * cwnd < 1 million packets
370 * RTT < 100 seconds
371 * HZ < 1,000,00 (corresponding to 10 nano-second)
374 /* 1/c * 2^2*bictcp_HZ * srtt */
375 cube_factor = 1ull << (10+3*BICTCP_HZ); /* 2^40 */
377 /* divide by bic_scale and by constant Srtt (100ms) */
378 do_div(cube_factor, bic_scale * 10);
380 return tcp_register_congestion_control(&cubictcp);
383 static void __exit cubictcp_unregister(void)
385 tcp_unregister_congestion_control(&cubictcp);
388 module_init(cubictcp_register);
389 module_exit(cubictcp_unregister);
391 MODULE_AUTHOR("Sangtae Ha, Stephen Hemminger");
392 MODULE_LICENSE("GPL");
393 MODULE_DESCRIPTION("CUBIC TCP");
394 MODULE_VERSION("2.1");