2 * sata_qstor.c - Pacific Digital Corporation QStor SATA
4 * Maintained by: Mark Lord <mlord@pobox.com>
6 * Copyright 2005 Pacific Digital Corporation.
7 * (OSL/GPL code release authorized by Jalil Fadavi).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; see the file COPYING. If not, write to
22 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 * libata documentation is available via 'make {ps|pdf}docs',
26 * as Documentation/DocBook/libata.*
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/pci.h>
33 #include <linux/init.h>
34 #include <linux/blkdev.h>
35 #include <linux/delay.h>
36 #include <linux/interrupt.h>
37 #include <linux/device.h>
38 #include <scsi/scsi_host.h>
39 #include <linux/libata.h>
41 #define DRV_NAME "sata_qstor"
42 #define DRV_VERSION "0.09"
48 QS_MAX_PRD
= LIBATA_MAX_PRD
,
50 QS_CPB_BYTES
= (1 << QS_CPB_ORDER
),
51 QS_PRD_BYTES
= QS_MAX_PRD
* 16,
52 QS_PKT_BYTES
= QS_CPB_BYTES
+ QS_PRD_BYTES
,
54 /* global register offsets */
55 QS_HCF_CNFG3
= 0x0003, /* host configuration offset */
56 QS_HID_HPHY
= 0x0004, /* host physical interface info */
57 QS_HCT_CTRL
= 0x00e4, /* global interrupt mask offset */
58 QS_HST_SFF
= 0x0100, /* host status fifo offset */
59 QS_HVS_SERD3
= 0x0393, /* PHY enable offset */
61 /* global control bits */
62 QS_HPHY_64BIT
= (1 << 1), /* 64-bit bus detected */
63 QS_CNFG3_GSRST
= 0x01, /* global chip reset */
64 QS_SERD3_PHY_ENA
= 0xf0, /* PHY detection ENAble*/
66 /* per-channel register offsets */
67 QS_CCF_CPBA
= 0x0710, /* chan CPB base address */
68 QS_CCF_CSEP
= 0x0718, /* chan CPB separation factor */
69 QS_CFC_HUFT
= 0x0800, /* host upstream fifo threshold */
70 QS_CFC_HDFT
= 0x0804, /* host downstream fifo threshold */
71 QS_CFC_DUFT
= 0x0808, /* dev upstream fifo threshold */
72 QS_CFC_DDFT
= 0x080c, /* dev downstream fifo threshold */
73 QS_CCT_CTR0
= 0x0900, /* chan control-0 offset */
74 QS_CCT_CTR1
= 0x0901, /* chan control-1 offset */
75 QS_CCT_CFF
= 0x0a00, /* chan command fifo offset */
77 /* channel control bits */
78 QS_CTR0_REG
= (1 << 1), /* register mode (vs. pkt mode) */
79 QS_CTR0_CLER
= (1 << 2), /* clear channel errors */
80 QS_CTR1_RDEV
= (1 << 1), /* sata phy/comms reset */
81 QS_CTR1_RCHN
= (1 << 4), /* reset channel logic */
82 QS_CCF_RUN_PKT
= 0x107, /* RUN a new dma PKT */
84 /* pkt sub-field headers */
85 QS_HCB_HDR
= 0x01, /* Host Control Block header */
86 QS_DCB_HDR
= 0x02, /* Device Control Block header */
88 /* pkt HCB flag bits */
89 QS_HF_DIRO
= (1 << 0), /* data DIRection Out */
90 QS_HF_DAT
= (1 << 3), /* DATa pkt */
91 QS_HF_IEN
= (1 << 4), /* Interrupt ENable */
92 QS_HF_VLD
= (1 << 5), /* VaLiD pkt */
94 /* pkt DCB flag bits */
95 QS_DF_PORD
= (1 << 2), /* Pio OR Dma */
96 QS_DF_ELBA
= (1 << 3), /* Extended LBA (lba48) */
99 board_2068_idx
= 0, /* QStor 4-port SATA/RAID */
103 QS_DMA_BOUNDARY
= ~0UL
106 typedef enum { qs_state_idle
, qs_state_pkt
, qs_state_mmio
} qs_state_t
;
108 struct qs_port_priv
{
114 static int qs_scr_read(struct ata_port
*ap
, unsigned int sc_reg
, u32
*val
);
115 static int qs_scr_write(struct ata_port
*ap
, unsigned int sc_reg
, u32 val
);
116 static int qs_ata_init_one (struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
117 static int qs_port_start(struct ata_port
*ap
);
118 static void qs_host_stop(struct ata_host
*host
);
119 static void qs_phy_reset(struct ata_port
*ap
);
120 static void qs_qc_prep(struct ata_queued_cmd
*qc
);
121 static unsigned int qs_qc_issue(struct ata_queued_cmd
*qc
);
122 static int qs_check_atapi_dma(struct ata_queued_cmd
*qc
);
123 static void qs_bmdma_stop(struct ata_queued_cmd
*qc
);
124 static u8
qs_bmdma_status(struct ata_port
*ap
);
125 static void qs_irq_clear(struct ata_port
*ap
);
126 static void qs_eng_timeout(struct ata_port
*ap
);
128 static struct scsi_host_template qs_ata_sht
= {
129 .module
= THIS_MODULE
,
131 .ioctl
= ata_scsi_ioctl
,
132 .queuecommand
= ata_scsi_queuecmd
,
133 .can_queue
= ATA_DEF_QUEUE
,
134 .this_id
= ATA_SHT_THIS_ID
,
135 .sg_tablesize
= QS_MAX_PRD
,
136 .cmd_per_lun
= ATA_SHT_CMD_PER_LUN
,
137 .emulated
= ATA_SHT_EMULATED
,
138 //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
139 .use_clustering
= ENABLE_CLUSTERING
,
140 .proc_name
= DRV_NAME
,
141 .dma_boundary
= QS_DMA_BOUNDARY
,
142 .slave_configure
= ata_scsi_slave_config
,
143 .slave_destroy
= ata_scsi_slave_destroy
,
144 .bios_param
= ata_std_bios_param
,
147 static const struct ata_port_operations qs_ata_ops
= {
148 .port_disable
= ata_port_disable
,
149 .tf_load
= ata_tf_load
,
150 .tf_read
= ata_tf_read
,
151 .check_status
= ata_check_status
,
152 .check_atapi_dma
= qs_check_atapi_dma
,
153 .exec_command
= ata_exec_command
,
154 .dev_select
= ata_std_dev_select
,
155 .phy_reset
= qs_phy_reset
,
156 .qc_prep
= qs_qc_prep
,
157 .qc_issue
= qs_qc_issue
,
158 .data_xfer
= ata_data_xfer
,
159 .eng_timeout
= qs_eng_timeout
,
160 .irq_clear
= qs_irq_clear
,
161 .irq_on
= ata_irq_on
,
162 .irq_ack
= ata_irq_ack
,
163 .scr_read
= qs_scr_read
,
164 .scr_write
= qs_scr_write
,
165 .port_start
= qs_port_start
,
166 .host_stop
= qs_host_stop
,
167 .bmdma_stop
= qs_bmdma_stop
,
168 .bmdma_status
= qs_bmdma_status
,
171 static const struct ata_port_info qs_port_info
[] = {
174 .flags
= ATA_FLAG_SATA
| ATA_FLAG_NO_LEGACY
|
175 ATA_FLAG_SATA_RESET
|
176 //FIXME ATA_FLAG_SRST |
177 ATA_FLAG_MMIO
| ATA_FLAG_PIO_POLLING
,
178 .pio_mask
= 0x10, /* pio4 */
179 .udma_mask
= ATA_UDMA6
,
180 .port_ops
= &qs_ata_ops
,
184 static const struct pci_device_id qs_ata_pci_tbl
[] = {
185 { PCI_VDEVICE(PDC
, 0x2068), board_2068_idx
},
187 { } /* terminate list */
190 static struct pci_driver qs_ata_pci_driver
= {
192 .id_table
= qs_ata_pci_tbl
,
193 .probe
= qs_ata_init_one
,
194 .remove
= ata_pci_remove_one
,
197 static void __iomem
*qs_mmio_base(struct ata_host
*host
)
199 return host
->iomap
[QS_MMIO_BAR
];
202 static int qs_check_atapi_dma(struct ata_queued_cmd
*qc
)
204 return 1; /* ATAPI DMA not supported */
207 static void qs_bmdma_stop(struct ata_queued_cmd
*qc
)
212 static u8
qs_bmdma_status(struct ata_port
*ap
)
217 static void qs_irq_clear(struct ata_port
*ap
)
222 static inline void qs_enter_reg_mode(struct ata_port
*ap
)
224 u8 __iomem
*chan
= qs_mmio_base(ap
->host
) + (ap
->port_no
* 0x4000);
226 writeb(QS_CTR0_REG
, chan
+ QS_CCT_CTR0
);
227 readb(chan
+ QS_CCT_CTR0
); /* flush */
230 static inline void qs_reset_channel_logic(struct ata_port
*ap
)
232 u8 __iomem
*chan
= qs_mmio_base(ap
->host
) + (ap
->port_no
* 0x4000);
234 writeb(QS_CTR1_RCHN
, chan
+ QS_CCT_CTR1
);
235 readb(chan
+ QS_CCT_CTR0
); /* flush */
236 qs_enter_reg_mode(ap
);
239 static void qs_phy_reset(struct ata_port
*ap
)
241 struct qs_port_priv
*pp
= ap
->private_data
;
243 pp
->state
= qs_state_idle
;
244 qs_reset_channel_logic(ap
);
248 static void qs_eng_timeout(struct ata_port
*ap
)
250 struct qs_port_priv
*pp
= ap
->private_data
;
252 if (pp
->state
!= qs_state_idle
) /* healthy paranoia */
253 pp
->state
= qs_state_mmio
;
254 qs_reset_channel_logic(ap
);
258 static int qs_scr_read(struct ata_port
*ap
, unsigned int sc_reg
, u32
*val
)
260 if (sc_reg
> SCR_CONTROL
)
262 *val
= readl(ap
->ioaddr
.scr_addr
+ (sc_reg
* 8));
266 static int qs_scr_write(struct ata_port
*ap
, unsigned int sc_reg
, u32 val
)
268 if (sc_reg
> SCR_CONTROL
)
270 writel(val
, ap
->ioaddr
.scr_addr
+ (sc_reg
* 8));
274 static unsigned int qs_fill_sg(struct ata_queued_cmd
*qc
)
276 struct scatterlist
*sg
;
277 struct ata_port
*ap
= qc
->ap
;
278 struct qs_port_priv
*pp
= ap
->private_data
;
280 u8
*prd
= pp
->pkt
+ QS_CPB_BYTES
;
282 WARN_ON(qc
->__sg
== NULL
);
283 WARN_ON(qc
->n_elem
== 0 && qc
->pad_len
== 0);
286 ata_for_each_sg(sg
, qc
) {
290 addr
= sg_dma_address(sg
);
291 *(__le64
*)prd
= cpu_to_le64(addr
);
294 len
= sg_dma_len(sg
);
295 *(__le32
*)prd
= cpu_to_le32(len
);
298 VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem
,
299 (unsigned long long)addr
, len
);
306 static void qs_qc_prep(struct ata_queued_cmd
*qc
)
308 struct qs_port_priv
*pp
= qc
->ap
->private_data
;
309 u8 dflags
= QS_DF_PORD
, *buf
= pp
->pkt
;
310 u8 hflags
= QS_HF_DAT
| QS_HF_IEN
| QS_HF_VLD
;
316 qs_enter_reg_mode(qc
->ap
);
317 if (qc
->tf
.protocol
!= ATA_PROT_DMA
) {
322 nelem
= qs_fill_sg(qc
);
324 if ((qc
->tf
.flags
& ATA_TFLAG_WRITE
))
325 hflags
|= QS_HF_DIRO
;
326 if ((qc
->tf
.flags
& ATA_TFLAG_LBA48
))
327 dflags
|= QS_DF_ELBA
;
329 /* host control block (HCB) */
330 buf
[ 0] = QS_HCB_HDR
;
332 *(__le32
*)(&buf
[ 4]) = cpu_to_le32(qc
->nbytes
);
333 *(__le32
*)(&buf
[ 8]) = cpu_to_le32(nelem
);
334 addr
= ((u64
)pp
->pkt_dma
) + QS_CPB_BYTES
;
335 *(__le64
*)(&buf
[16]) = cpu_to_le64(addr
);
337 /* device control block (DCB) */
338 buf
[24] = QS_DCB_HDR
;
341 /* frame information structure (FIS) */
342 ata_tf_to_fis(&qc
->tf
, 0, 1, &buf
[32]);
345 static inline void qs_packet_start(struct ata_queued_cmd
*qc
)
347 struct ata_port
*ap
= qc
->ap
;
348 u8 __iomem
*chan
= qs_mmio_base(ap
->host
) + (ap
->port_no
* 0x4000);
350 VPRINTK("ENTER, ap %p\n", ap
);
352 writeb(QS_CTR0_CLER
, chan
+ QS_CCT_CTR0
);
353 wmb(); /* flush PRDs and pkt to memory */
354 writel(QS_CCF_RUN_PKT
, chan
+ QS_CCT_CFF
);
355 readl(chan
+ QS_CCT_CFF
); /* flush */
358 static unsigned int qs_qc_issue(struct ata_queued_cmd
*qc
)
360 struct qs_port_priv
*pp
= qc
->ap
->private_data
;
362 switch (qc
->tf
.protocol
) {
365 pp
->state
= qs_state_pkt
;
369 case ATA_PROT_ATAPI_DMA
:
377 pp
->state
= qs_state_mmio
;
378 return ata_qc_issue_prot(qc
);
381 static inline unsigned int qs_intr_pkt(struct ata_host
*host
)
383 unsigned int handled
= 0;
385 u8 __iomem
*mmio_base
= qs_mmio_base(host
);
388 u32 sff0
= readl(mmio_base
+ QS_HST_SFF
);
389 u32 sff1
= readl(mmio_base
+ QS_HST_SFF
+ 4);
390 u8 sEVLD
= (sff1
>> 30) & 0x01; /* valid flag */
391 sFFE
= sff1
>> 31; /* empty flag */
394 u8 sDST
= sff0
>> 16; /* dev status */
395 u8 sHST
= sff1
& 0x3f; /* host status */
396 unsigned int port_no
= (sff1
>> 8) & 0x03;
397 struct ata_port
*ap
= host
->ports
[port_no
];
399 DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
400 sff1
, sff0
, port_no
, sHST
, sDST
);
402 if (ap
&& !(ap
->flags
& ATA_FLAG_DISABLED
)) {
403 struct ata_queued_cmd
*qc
;
404 struct qs_port_priv
*pp
= ap
->private_data
;
405 if (!pp
|| pp
->state
!= qs_state_pkt
)
407 qc
= ata_qc_from_tag(ap
, ap
->active_tag
);
408 if (qc
&& (!(qc
->tf
.flags
& ATA_TFLAG_POLLING
))) {
410 case 0: /* successful CPB */
411 case 3: /* device error */
412 pp
->state
= qs_state_idle
;
413 qs_enter_reg_mode(qc
->ap
);
414 qc
->err_mask
|= ac_err_mask(sDST
);
427 static inline unsigned int qs_intr_mmio(struct ata_host
*host
)
429 unsigned int handled
= 0, port_no
;
431 for (port_no
= 0; port_no
< host
->n_ports
; ++port_no
) {
433 ap
= host
->ports
[port_no
];
435 !(ap
->flags
& ATA_FLAG_DISABLED
)) {
436 struct ata_queued_cmd
*qc
;
437 struct qs_port_priv
*pp
= ap
->private_data
;
438 if (!pp
|| pp
->state
!= qs_state_mmio
)
440 qc
= ata_qc_from_tag(ap
, ap
->active_tag
);
441 if (qc
&& (!(qc
->tf
.flags
& ATA_TFLAG_POLLING
))) {
443 /* check main status, clearing INTRQ */
444 u8 status
= ata_check_status(ap
);
445 if ((status
& ATA_BUSY
))
447 DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
448 ap
->print_id
, qc
->tf
.protocol
, status
);
450 /* complete taskfile transaction */
451 pp
->state
= qs_state_idle
;
452 qc
->err_mask
|= ac_err_mask(status
);
461 static irqreturn_t
qs_intr(int irq
, void *dev_instance
)
463 struct ata_host
*host
= dev_instance
;
464 unsigned int handled
= 0;
468 spin_lock(&host
->lock
);
469 handled
= qs_intr_pkt(host
) | qs_intr_mmio(host
);
470 spin_unlock(&host
->lock
);
474 return IRQ_RETVAL(handled
);
477 static void qs_ata_setup_port(struct ata_ioports
*port
, void __iomem
*base
)
480 port
->data_addr
= base
+ 0x400;
482 port
->feature_addr
= base
+ 0x408; /* hob_feature = 0x409 */
483 port
->nsect_addr
= base
+ 0x410; /* hob_nsect = 0x411 */
484 port
->lbal_addr
= base
+ 0x418; /* hob_lbal = 0x419 */
485 port
->lbam_addr
= base
+ 0x420; /* hob_lbam = 0x421 */
486 port
->lbah_addr
= base
+ 0x428; /* hob_lbah = 0x429 */
487 port
->device_addr
= base
+ 0x430;
489 port
->command_addr
= base
+ 0x438;
490 port
->altstatus_addr
=
491 port
->ctl_addr
= base
+ 0x440;
492 port
->scr_addr
= base
+ 0xc00;
495 static int qs_port_start(struct ata_port
*ap
)
497 struct device
*dev
= ap
->host
->dev
;
498 struct qs_port_priv
*pp
;
499 void __iomem
*mmio_base
= qs_mmio_base(ap
->host
);
500 void __iomem
*chan
= mmio_base
+ (ap
->port_no
* 0x4000);
504 rc
= ata_port_start(ap
);
507 qs_enter_reg_mode(ap
);
508 pp
= devm_kzalloc(dev
, sizeof(*pp
), GFP_KERNEL
);
511 pp
->pkt
= dmam_alloc_coherent(dev
, QS_PKT_BYTES
, &pp
->pkt_dma
,
515 memset(pp
->pkt
, 0, QS_PKT_BYTES
);
516 ap
->private_data
= pp
;
518 addr
= (u64
)pp
->pkt_dma
;
519 writel((u32
) addr
, chan
+ QS_CCF_CPBA
);
520 writel((u32
)(addr
>> 32), chan
+ QS_CCF_CPBA
+ 4);
524 static void qs_host_stop(struct ata_host
*host
)
526 void __iomem
*mmio_base
= qs_mmio_base(host
);
528 writeb(0, mmio_base
+ QS_HCT_CTRL
); /* disable host interrupts */
529 writeb(QS_CNFG3_GSRST
, mmio_base
+ QS_HCF_CNFG3
); /* global reset */
532 static void qs_host_init(struct ata_host
*host
, unsigned int chip_id
)
534 void __iomem
*mmio_base
= host
->iomap
[QS_MMIO_BAR
];
535 unsigned int port_no
;
537 writeb(0, mmio_base
+ QS_HCT_CTRL
); /* disable host interrupts */
538 writeb(QS_CNFG3_GSRST
, mmio_base
+ QS_HCF_CNFG3
); /* global reset */
540 /* reset each channel in turn */
541 for (port_no
= 0; port_no
< host
->n_ports
; ++port_no
) {
542 u8 __iomem
*chan
= mmio_base
+ (port_no
* 0x4000);
543 writeb(QS_CTR1_RDEV
|QS_CTR1_RCHN
, chan
+ QS_CCT_CTR1
);
544 writeb(QS_CTR0_REG
, chan
+ QS_CCT_CTR0
);
545 readb(chan
+ QS_CCT_CTR0
); /* flush */
547 writeb(QS_SERD3_PHY_ENA
, mmio_base
+ QS_HVS_SERD3
); /* enable phy */
549 for (port_no
= 0; port_no
< host
->n_ports
; ++port_no
) {
550 u8 __iomem
*chan
= mmio_base
+ (port_no
* 0x4000);
551 /* set FIFO depths to same settings as Windows driver */
552 writew(32, chan
+ QS_CFC_HUFT
);
553 writew(32, chan
+ QS_CFC_HDFT
);
554 writew(10, chan
+ QS_CFC_DUFT
);
555 writew( 8, chan
+ QS_CFC_DDFT
);
556 /* set CPB size in bytes, as a power of two */
557 writeb(QS_CPB_ORDER
, chan
+ QS_CCF_CSEP
);
559 writeb(1, mmio_base
+ QS_HCT_CTRL
); /* enable host interrupts */
563 * The QStor understands 64-bit buses, and uses 64-bit fields
564 * for DMA pointers regardless of bus width. We just have to
565 * make sure our DMA masks are set appropriately for whatever
566 * bridge lies between us and the QStor, and then the DMA mapping
567 * code will ensure we only ever "see" appropriate buffer addresses.
568 * If we're 32-bit limited somewhere, then our 64-bit fields will
569 * just end up with zeros in the upper 32-bits, without any special
570 * logic required outside of this routine (below).
572 static int qs_set_dma_masks(struct pci_dev
*pdev
, void __iomem
*mmio_base
)
574 u32 bus_info
= readl(mmio_base
+ QS_HID_HPHY
);
575 int rc
, have_64bit_bus
= (bus_info
& QS_HPHY_64BIT
);
577 if (have_64bit_bus
&&
578 !pci_set_dma_mask(pdev
, DMA_64BIT_MASK
)) {
579 rc
= pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
);
581 rc
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
583 dev_printk(KERN_ERR
, &pdev
->dev
,
584 "64-bit DMA enable failed\n");
589 rc
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
591 dev_printk(KERN_ERR
, &pdev
->dev
,
592 "32-bit DMA enable failed\n");
595 rc
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
597 dev_printk(KERN_ERR
, &pdev
->dev
,
598 "32-bit consistent DMA enable failed\n");
605 static int qs_ata_init_one(struct pci_dev
*pdev
,
606 const struct pci_device_id
*ent
)
608 static int printed_version
;
609 unsigned int board_idx
= (unsigned int) ent
->driver_data
;
610 const struct ata_port_info
*ppi
[] = { &qs_port_info
[board_idx
], NULL
};
611 struct ata_host
*host
;
614 if (!printed_version
++)
615 dev_printk(KERN_DEBUG
, &pdev
->dev
, "version " DRV_VERSION
"\n");
618 host
= ata_host_alloc_pinfo(&pdev
->dev
, ppi
, QS_PORTS
);
622 /* acquire resources and fill host */
623 rc
= pcim_enable_device(pdev
);
627 if ((pci_resource_flags(pdev
, QS_MMIO_BAR
) & IORESOURCE_MEM
) == 0)
630 rc
= pcim_iomap_regions(pdev
, 1 << QS_MMIO_BAR
, DRV_NAME
);
633 host
->iomap
= pcim_iomap_table(pdev
);
635 rc
= qs_set_dma_masks(pdev
, host
->iomap
[QS_MMIO_BAR
]);
639 for (port_no
= 0; port_no
< host
->n_ports
; ++port_no
) {
641 host
->iomap
[QS_MMIO_BAR
] + (port_no
* 0x4000);
642 qs_ata_setup_port(&host
->ports
[port_no
]->ioaddr
, chan
);
645 /* initialize adapter */
646 qs_host_init(host
, board_idx
);
648 pci_set_master(pdev
);
649 return ata_host_activate(host
, pdev
->irq
, qs_intr
, IRQF_SHARED
,
653 static int __init
qs_ata_init(void)
655 return pci_register_driver(&qs_ata_pci_driver
);
658 static void __exit
qs_ata_exit(void)
660 pci_unregister_driver(&qs_ata_pci_driver
);
663 MODULE_AUTHOR("Mark Lord");
664 MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
665 MODULE_LICENSE("GPL");
666 MODULE_DEVICE_TABLE(pci
, qs_ata_pci_tbl
);
667 MODULE_VERSION(DRV_VERSION
);
669 module_init(qs_ata_init
);
670 module_exit(qs_ata_exit
);