drivers/input/misc/ati_remote2.c

   1 /*
   2  * ati_remote2 - ATI/Philips USB RF remote driver
   3  *
   4  * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
   5  * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2
   9  * as published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/usb/input.h>
  13
  14 #define DRIVER_DESC    "ATI/Philips USB RF remote driver"
  15 #define DRIVER_VERSION "0.3"
  16
  17 MODULE_DESCRIPTION(DRIVER_DESC);
  18 MODULE_VERSION(DRIVER_VERSION);
  19 MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
  20 MODULE_LICENSE("GPL");
  21
  22 /*
  23  * ATI Remote Wonder II Channel Configuration
  24  *
  25  * The remote control can by assigned one of sixteen "channels" in order to facilitate
  26  * the use of multiple remote controls within range of each other.
  27  * A remote's "channel" may be altered by pressing and holding the "PC" button for
  28  * approximately 3 seconds, after which the button will slowly flash the count of the
  29  * currently configured "channel", using the numeric keypad enter a number between 1 and
  30  * 16 and then press the "PC" button again, the button will slowly flash the count of the
  31  * newly configured "channel".
  32  */
  33
  34 enum {
  35         ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
  36         ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
  37 };
  38
  39 static int ati_remote2_set_mask(const char *val,
  40                                 struct kernel_param *kp, unsigned int max)
  41 {
  42         unsigned long mask;
  43         int ret;
  44
  45         if (!val)
  46                 return -EINVAL;
  47
  48         ret = strict_strtoul(val, 0, &mask);
  49         if (ret)
  50                 return ret;
  51
  52         if (mask & ~max)
  53                 return -EINVAL;
  54
  55         *(unsigned int *)kp->arg = mask;
  56
  57         return 0;
  58 }
  59
  60 static int ati_remote2_set_channel_mask(const char *val,
  61                                         struct kernel_param *kp)
  62 {
  63         pr_debug("%s()\n", __func__);
  64
  65         return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
  66 }
  67
  68 static int ati_remote2_get_channel_mask(char *buffer, struct kernel_param *kp)
  69 {
  70         pr_debug("%s()\n", __func__);
  71
  72         return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
  73 }
  74
  75 static int ati_remote2_set_mode_mask(const char *val, struct kernel_param *kp)
  76 {
  77         pr_debug("%s()\n", __func__);
  78
  79         return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
  80 }
  81
  82 static int ati_remote2_get_mode_mask(char *buffer, struct kernel_param *kp)
  83 {
  84         pr_debug("%s()\n", __func__);
  85
  86         return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
  87 }
  88
  89 static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
  90 #define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
  91 #define param_set_channel_mask ati_remote2_set_channel_mask
  92 #define param_get_channel_mask ati_remote2_get_channel_mask
  93 module_param(channel_mask, channel_mask, 0644);
  94 MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
  95
  96 static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
  97 #define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
  98 #define param_set_mode_mask ati_remote2_set_mode_mask
  99 #define param_get_mode_mask ati_remote2_get_mode_mask
 100 module_param(mode_mask, mode_mask, 0644);
 101 MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
 102
 103 static struct usb_device_id ati_remote2_id_table[] = {
 104         { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
 105         { }
 106 };
 107 MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
 108
 109 static DEFINE_MUTEX(ati_remote2_mutex);
 110
 111 enum {
 112         ATI_REMOTE2_OPENED = 0x1,
 113         ATI_REMOTE2_SUSPENDED = 0x2,
 114 };
 115
 116 enum {
 117         ATI_REMOTE2_AUX1,
 118         ATI_REMOTE2_AUX2,
 119         ATI_REMOTE2_AUX3,
 120         ATI_REMOTE2_AUX4,
 121         ATI_REMOTE2_PC,
 122         ATI_REMOTE2_MODES,
 123 };
 124
 125 static const struct {
 126         u8  hw_code;
 127         u16 keycode;
 128 } ati_remote2_key_table[] = {
 129         { 0x00, KEY_0 },
 130         { 0x01, KEY_1 },
 131         { 0x02, KEY_2 },
 132         { 0x03, KEY_3 },
 133         { 0x04, KEY_4 },
 134         { 0x05, KEY_5 },
 135         { 0x06, KEY_6 },
 136         { 0x07, KEY_7 },
 137         { 0x08, KEY_8 },
 138         { 0x09, KEY_9 },
 139         { 0x0c, KEY_POWER },
 140         { 0x0d, KEY_MUTE },
 141         { 0x10, KEY_VOLUMEUP },
 142         { 0x11, KEY_VOLUMEDOWN },
 143         { 0x20, KEY_CHANNELUP },
 144         { 0x21, KEY_CHANNELDOWN },
 145         { 0x28, KEY_FORWARD },
 146         { 0x29, KEY_REWIND },
 147         { 0x2c, KEY_PLAY },
 148         { 0x30, KEY_PAUSE },
 149         { 0x31, KEY_STOP },
 150         { 0x37, KEY_RECORD },
 151         { 0x38, KEY_DVD },
 152         { 0x39, KEY_TV },
 153         { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
 154         { 0x54, KEY_MENU },
 155         { 0x58, KEY_UP },
 156         { 0x59, KEY_DOWN },
 157         { 0x5a, KEY_LEFT },
 158         { 0x5b, KEY_RIGHT },
 159         { 0x5c, KEY_OK },
 160         { 0x78, KEY_A },
 161         { 0x79, KEY_B },
 162         { 0x7a, KEY_C },
 163         { 0x7b, KEY_D },
 164         { 0x7c, KEY_E },
 165         { 0x7d, KEY_F },
 166         { 0x82, KEY_ENTER },
 167         { 0x8e, KEY_VENDOR },
 168         { 0x96, KEY_COFFEE },
 169         { 0xa9, BTN_LEFT },
 170         { 0xaa, BTN_RIGHT },
 171         { 0xbe, KEY_QUESTION },
 172         { 0xd0, KEY_EDIT },
 173         { 0xd5, KEY_FRONT },
 174         { 0xf9, KEY_INFO },
 175 };
 176
 177 struct ati_remote2 {
 178         struct input_dev *idev;
 179         struct usb_device *udev;
 180
 181         struct usb_interface *intf[2];
 182         struct usb_endpoint_descriptor *ep[2];
 183         struct urb *urb[2];
 184         void *buf[2];
 185         dma_addr_t buf_dma[2];
 186
 187         unsigned long jiffies;
 188         int mode;
 189
 190         char name[64];
 191         char phys[64];
 192
 193         /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
 194         u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
 195
 196         unsigned int flags;
 197
 198         unsigned int channel_mask;
 199         unsigned int mode_mask;
 200 };
 201
 202 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
 203 static void ati_remote2_disconnect(struct usb_interface *interface);
 204 static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
 205 static int ati_remote2_resume(struct usb_interface *interface);
 206 static int ati_remote2_reset_resume(struct usb_interface *interface);
 207 static int ati_remote2_pre_reset(struct usb_interface *interface);
 208 static int ati_remote2_post_reset(struct usb_interface *interface);
 209
 210 static struct usb_driver ati_remote2_driver = {
 211         .name       = "ati_remote2",
 212         .probe      = ati_remote2_probe,
 213         .disconnect = ati_remote2_disconnect,
 214         .id_table   = ati_remote2_id_table,
 215         .suspend    = ati_remote2_suspend,
 216         .resume     = ati_remote2_resume,
 217         .reset_resume = ati_remote2_reset_resume,
 218         .pre_reset  = ati_remote2_pre_reset,
 219         .post_reset = ati_remote2_post_reset,
 220         .supports_autosuspend = 1,
 221 };
 222
 223 static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
 224 {
 225         int r;
 226
 227         r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
 228         if (r) {
 229                 dev_err(&ar2->intf[0]->dev,
 230                         "%s(): usb_submit_urb() = %d\n", __func__, r);
 231                 return r;
 232         }
 233         r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
 234         if (r) {
 235                 usb_kill_urb(ar2->urb[0]);
 236                 dev_err(&ar2->intf[1]->dev,
 237                         "%s(): usb_submit_urb() = %d\n", __func__, r);
 238                 return r;
 239         }
 240
 241         return 0;
 242 }
 243
 244 static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
 245 {
 246         usb_kill_urb(ar2->urb[1]);
 247         usb_kill_urb(ar2->urb[0]);
 248 }
 249
 250 static int ati_remote2_open(struct input_dev *idev)
 251 {
 252         struct ati_remote2 *ar2 = input_get_drvdata(idev);
 253         int r;
 254
 255         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 256
 257         r = usb_autopm_get_interface(ar2->intf[0]);
 258         if (r) {
 259                 dev_err(&ar2->intf[0]->dev,
 260                         "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
 261                 goto fail1;
 262         }
 263
 264         mutex_lock(&ati_remote2_mutex);
 265
 266         if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
 267                 r = ati_remote2_submit_urbs(ar2);
 268                 if (r)
 269                         goto fail2;
 270         }
 271
 272         ar2->flags |= ATI_REMOTE2_OPENED;
 273
 274         mutex_unlock(&ati_remote2_mutex);
 275
 276         usb_autopm_put_interface(ar2->intf[0]);
 277
 278         return 0;
 279
 280  fail2:
 281         mutex_unlock(&ati_remote2_mutex);
 282         usb_autopm_put_interface(ar2->intf[0]);
 283  fail1:
 284         return r;
 285 }
 286
 287 static void ati_remote2_close(struct input_dev *idev)
 288 {
 289         struct ati_remote2 *ar2 = input_get_drvdata(idev);
 290
 291         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 292
 293         mutex_lock(&ati_remote2_mutex);
 294
 295         if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
 296                 ati_remote2_kill_urbs(ar2);
 297
 298         ar2->flags &= ~ATI_REMOTE2_OPENED;
 299
 300         mutex_unlock(&ati_remote2_mutex);
 301 }
 302
 303 static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
 304 {
 305         struct input_dev *idev = ar2->idev;
 306         u8 *data = ar2->buf[0];
 307         int channel, mode;
 308
 309         channel = data[0] >> 4;
 310
 311         if (!((1 << channel) & ar2->channel_mask))
 312                 return;
 313
 314         mode = data[0] & 0x0F;
 315
 316         if (mode > ATI_REMOTE2_PC) {
 317                 dev_err(&ar2->intf[0]->dev,
 318                         "Unknown mode byte (%02x %02x %02x %02x)\n",
 319                         data[3], data[2], data[1], data[0]);
 320                 return;
 321         }
 322
 323         if (!((1 << mode) & ar2->mode_mask))
 324                 return;
 325
 326         input_event(idev, EV_REL, REL_X, (s8) data[1]);
 327         input_event(idev, EV_REL, REL_Y, (s8) data[2]);
 328         input_sync(idev);
 329 }
 330
 331 static int ati_remote2_lookup(unsigned int hw_code)
 332 {
 333         int i;
 334
 335         for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
 336                 if (ati_remote2_key_table[i].hw_code == hw_code)
 337                         return i;
 338
 339         return -1;
 340 }
 341
 342 static void ati_remote2_input_key(struct ati_remote2 *ar2)
 343 {
 344         struct input_dev *idev = ar2->idev;
 345         u8 *data = ar2->buf[1];
 346         int channel, mode, hw_code, index;
 347
 348         channel = data[0] >> 4;
 349
 350         if (!((1 << channel) & ar2->channel_mask))
 351                 return;
 352
 353         mode = data[0] & 0x0F;
 354
 355         if (mode > ATI_REMOTE2_PC) {
 356                 dev_err(&ar2->intf[1]->dev,
 357                         "Unknown mode byte (%02x %02x %02x %02x)\n",
 358                         data[3], data[2], data[1], data[0]);
 359                 return;
 360         }
 361
 362         hw_code = data[2];
 363         if (hw_code == 0x3f) {
 364                 /*
 365                  * For some incomprehensible reason the mouse pad generates
 366                  * events which look identical to the events from the last
 367                  * pressed mode key. Naturally we don't want to generate key
 368                  * events for the mouse pad so we filter out any subsequent
 369                  * events from the same mode key.
 370                  */
 371                 if (ar2->mode == mode)
 372                         return;
 373
 374                 if (data[1] == 0)
 375                         ar2->mode = mode;
 376         }
 377
 378         if (!((1 << mode) & ar2->mode_mask))
 379                 return;
 380
 381         index = ati_remote2_lookup(hw_code);
 382         if (index < 0) {
 383                 dev_err(&ar2->intf[1]->dev,
 384                         "Unknown code byte (%02x %02x %02x %02x)\n",
 385                         data[3], data[2], data[1], data[0]);
 386                 return;
 387         }
 388
 389         switch (data[1]) {
 390         case 0: /* release */
 391                 break;
 392         case 1: /* press */
 393                 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
 394                 break;
 395         case 2: /* repeat */
 396
 397                 /* No repeat for mouse buttons. */
 398                 if (ar2->keycode[mode][index] == BTN_LEFT ||
 399                     ar2->keycode[mode][index] == BTN_RIGHT)
 400                         return;
 401
 402                 if (!time_after_eq(jiffies, ar2->jiffies))
 403                         return;
 404
 405                 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
 406                 break;
 407         default:
 408                 dev_err(&ar2->intf[1]->dev,
 409                         "Unknown state byte (%02x %02x %02x %02x)\n",
 410                         data[3], data[2], data[1], data[0]);
 411                 return;
 412         }
 413
 414         input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
 415         input_sync(idev);
 416 }
 417
 418 static void ati_remote2_complete_mouse(struct urb *urb)
 419 {
 420         struct ati_remote2 *ar2 = urb->context;
 421         int r;
 422
 423         switch (urb->status) {
 424         case 0:
 425                 usb_mark_last_busy(ar2->udev);
 426                 ati_remote2_input_mouse(ar2);
 427                 break;
 428         case -ENOENT:
 429         case -EILSEQ:
 430         case -ECONNRESET:
 431         case -ESHUTDOWN:
 432                 dev_dbg(&ar2->intf[0]->dev,
 433                         "%s(): urb status = %d\n", __func__, urb->status);
 434                 return;
 435         default:
 436                 usb_mark_last_busy(ar2->udev);
 437                 dev_err(&ar2->intf[0]->dev,
 438                         "%s(): urb status = %d\n", __func__, urb->status);
 439         }
 440
 441         r = usb_submit_urb(urb, GFP_ATOMIC);
 442         if (r)
 443                 dev_err(&ar2->intf[0]->dev,
 444                         "%s(): usb_submit_urb() = %d\n", __func__, r);
 445 }
 446
 447 static void ati_remote2_complete_key(struct urb *urb)
 448 {
 449         struct ati_remote2 *ar2 = urb->context;
 450         int r;
 451
 452         switch (urb->status) {
 453         case 0:
 454                 usb_mark_last_busy(ar2->udev);
 455                 ati_remote2_input_key(ar2);
 456                 break;
 457         case -ENOENT:
 458         case -EILSEQ:
 459         case -ECONNRESET:
 460         case -ESHUTDOWN:
 461                 dev_dbg(&ar2->intf[1]->dev,
 462                         "%s(): urb status = %d\n", __func__, urb->status);
 463                 return;
 464         default:
 465                 usb_mark_last_busy(ar2->udev);
 466                 dev_err(&ar2->intf[1]->dev,
 467                         "%s(): urb status = %d\n", __func__, urb->status);
 468         }
 469
 470         r = usb_submit_urb(urb, GFP_ATOMIC);
 471         if (r)
 472                 dev_err(&ar2->intf[1]->dev,
 473                         "%s(): usb_submit_urb() = %d\n", __func__, r);
 474 }
 475
 476 static int ati_remote2_getkeycode(struct input_dev *idev,
 477                                   int scancode, int *keycode)
 478 {
 479         struct ati_remote2 *ar2 = input_get_drvdata(idev);
 480         int index, mode;
 481
 482         mode = scancode >> 8;
 483         if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
 484                 return -EINVAL;
 485
 486         index = ati_remote2_lookup(scancode & 0xFF);
 487         if (index < 0)
 488                 return -EINVAL;
 489
 490         *keycode = ar2->keycode[mode][index];
 491         return 0;
 492 }
 493
 494 static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
 495 {
 496         struct ati_remote2 *ar2 = input_get_drvdata(idev);
 497         int index, mode, old_keycode;
 498
 499         mode = scancode >> 8;
 500         if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
 501                 return -EINVAL;
 502
 503         index = ati_remote2_lookup(scancode & 0xFF);
 504         if (index < 0)
 505                 return -EINVAL;
 506
 507         if (keycode < KEY_RESERVED || keycode > KEY_MAX)
 508                 return -EINVAL;
 509
 510         old_keycode = ar2->keycode[mode][index];
 511         ar2->keycode[mode][index] = keycode;
 512         set_bit(keycode, idev->keybit);
 513
 514         for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
 515                 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
 516                         if (ar2->keycode[mode][index] == old_keycode)
 517                                 return 0;
 518                 }
 519         }
 520
 521         clear_bit(old_keycode, idev->keybit);
 522
 523         return 0;
 524 }
 525
 526 static int ati_remote2_input_init(struct ati_remote2 *ar2)
 527 {
 528         struct input_dev *idev;
 529         int index, mode, retval;
 530
 531         idev = input_allocate_device();
 532         if (!idev)
 533                 return -ENOMEM;
 534
 535         ar2->idev = idev;
 536         input_set_drvdata(idev, ar2);
 537
 538         idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
 539         idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
 540                 BIT_MASK(BTN_RIGHT);
 541         idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 542
 543         for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
 544                 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
 545                         ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
 546                         set_bit(ar2->keycode[mode][index], idev->keybit);
 547                 }
 548         }
 549
 550         /* AUX1-AUX4 and PC generate the same scancode. */
 551         index = ati_remote2_lookup(0x3f);
 552         ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
 553         ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
 554         ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
 555         ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
 556         ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
 557         set_bit(KEY_PROG1, idev->keybit);
 558         set_bit(KEY_PROG2, idev->keybit);
 559         set_bit(KEY_PROG3, idev->keybit);
 560         set_bit(KEY_PROG4, idev->keybit);
 561         set_bit(KEY_PC, idev->keybit);
 562
 563         idev->rep[REP_DELAY]  = 250;
 564         idev->rep[REP_PERIOD] = 33;
 565
 566         idev->open = ati_remote2_open;
 567         idev->close = ati_remote2_close;
 568
 569         idev->getkeycode = ati_remote2_getkeycode;
 570         idev->setkeycode = ati_remote2_setkeycode;
 571
 572         idev->name = ar2->name;
 573         idev->phys = ar2->phys;
 574
 575         usb_to_input_id(ar2->udev, &idev->id);
 576         idev->dev.parent = &ar2->udev->dev;
 577
 578         retval = input_register_device(idev);
 579         if (retval)
 580                 input_free_device(idev);
 581
 582         return retval;
 583 }
 584
 585 static int ati_remote2_urb_init(struct ati_remote2 *ar2)
 586 {
 587         struct usb_device *udev = ar2->udev;
 588         int i, pipe, maxp;
 589
 590         for (i = 0; i < 2; i++) {
 591                 ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
 592                 if (!ar2->buf[i])
 593                         return -ENOMEM;
 594
 595                 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
 596                 if (!ar2->urb[i])
 597                         return -ENOMEM;
 598
 599                 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
 600                 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 601                 maxp = maxp > 4 ? 4 : maxp;
 602
 603                 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
 604                                  i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
 605                                  ar2, ar2->ep[i]->bInterval);
 606                 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
 607                 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 608         }
 609
 610         return 0;
 611 }
 612
 613 static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
 614 {
 615         int i;
 616
 617         for (i = 0; i < 2; i++) {
 618                 usb_free_urb(ar2->urb[i]);
 619                 usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
 620         }
 621 }
 622
 623 static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
 624 {
 625         int r, i, channel;
 626
 627         /*
 628          * Configure receiver to only accept input from remote "channel"
 629          *  channel == 0  -> Accept input from any remote channel
 630          *  channel == 1  -> Only accept input from remote channel 1
 631          *  channel == 2  -> Only accept input from remote channel 2
 632          *  ...
 633          *  channel == 16 -> Only accept input from remote channel 16
 634          */
 635
 636         channel = 0;
 637         for (i = 0; i < 16; i++) {
 638                 if ((1 << i) & ch_mask) {
 639                         if (!(~(1 << i) & ch_mask))
 640                                 channel = i + 1;
 641                         break;
 642                 }
 643         }
 644
 645         r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
 646                             0x20,
 647                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 648                             channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 649         if (r) {
 650                 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
 651                         __func__, r);
 652                 return r;
 653         }
 654
 655         return 0;
 656 }
 657
 658 static ssize_t ati_remote2_show_channel_mask(struct device *dev,
 659                                              struct device_attribute *attr,
 660                                              char *buf)
 661 {
 662         struct usb_device *udev = to_usb_device(dev);
 663         struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 664         struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 665
 666         return sprintf(buf, "0x%04x\n", ar2->channel_mask);
 667 }
 668
 669 static ssize_t ati_remote2_store_channel_mask(struct device *dev,
 670                                               struct device_attribute *attr,
 671                                               const char *buf, size_t count)
 672 {
 673         struct usb_device *udev = to_usb_device(dev);
 674         struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 675         struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 676         unsigned long mask;
 677         int r;
 678
 679         if (strict_strtoul(buf, 0, &mask))
 680                 return -EINVAL;
 681
 682         if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
 683                 return -EINVAL;
 684
 685         r = usb_autopm_get_interface(ar2->intf[0]);
 686         if (r) {
 687                 dev_err(&ar2->intf[0]->dev,
 688                         "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
 689                 return r;
 690         }
 691
 692         mutex_lock(&ati_remote2_mutex);
 693
 694         if (mask != ar2->channel_mask && !ati_remote2_setup(ar2, mask))
 695                 ar2->channel_mask = mask;
 696
 697         mutex_unlock(&ati_remote2_mutex);
 698
 699         usb_autopm_put_interface(ar2->intf[0]);
 700
 701         return count;
 702 }
 703
 704 static ssize_t ati_remote2_show_mode_mask(struct device *dev,
 705                                           struct device_attribute *attr,
 706                                           char *buf)
 707 {
 708         struct usb_device *udev = to_usb_device(dev);
 709         struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 710         struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 711
 712         return sprintf(buf, "0x%02x\n", ar2->mode_mask);
 713 }
 714
 715 static ssize_t ati_remote2_store_mode_mask(struct device *dev,
 716                                            struct device_attribute *attr,
 717                                            const char *buf, size_t count)
 718 {
 719         struct usb_device *udev = to_usb_device(dev);
 720         struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 721         struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 722         unsigned long mask;
 723
 724         if (strict_strtoul(buf, 0, &mask))
 725                 return -EINVAL;
 726
 727         if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
 728                 return -EINVAL;
 729
 730         ar2->mode_mask = mask;
 731
 732         return count;
 733 }
 734
 735 static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
 736                    ati_remote2_store_channel_mask);
 737
 738 static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
 739                    ati_remote2_store_mode_mask);
 740
 741 static struct attribute *ati_remote2_attrs[] = {
 742         &dev_attr_channel_mask.attr,
 743         &dev_attr_mode_mask.attr,
 744         NULL,
 745 };
 746
 747 static struct attribute_group ati_remote2_attr_group = {
 748         .attrs = ati_remote2_attrs,
 749 };
 750
 751 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
 752 {
 753         struct usb_device *udev = interface_to_usbdev(interface);
 754         struct usb_host_interface *alt = interface->cur_altsetting;
 755         struct ati_remote2 *ar2;
 756         int r;
 757
 758         if (alt->desc.bInterfaceNumber)
 759                 return -ENODEV;
 760
 761         ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
 762         if (!ar2)
 763                 return -ENOMEM;
 764
 765         ar2->udev = udev;
 766
 767         ar2->intf[0] = interface;
 768         ar2->ep[0] = &alt->endpoint[0].desc;
 769
 770         ar2->intf[1] = usb_ifnum_to_if(udev, 1);
 771         r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
 772         if (r)
 773                 goto fail1;
 774         alt = ar2->intf[1]->cur_altsetting;
 775         ar2->ep[1] = &alt->endpoint[0].desc;
 776
 777         r = ati_remote2_urb_init(ar2);
 778         if (r)
 779                 goto fail2;
 780
 781         ar2->channel_mask = channel_mask;
 782         ar2->mode_mask = mode_mask;
 783
 784         r = ati_remote2_setup(ar2, ar2->channel_mask);
 785         if (r)
 786                 goto fail2;
 787
 788         usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
 789         strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
 790
 791         strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
 792
 793         r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
 794         if (r)
 795                 goto fail2;
 796
 797         r = ati_remote2_input_init(ar2);
 798         if (r)
 799                 goto fail3;
 800
 801         usb_set_intfdata(interface, ar2);
 802
 803         interface->needs_remote_wakeup = 1;
 804
 805         return 0;
 806
 807  fail3:
 808         sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
 809  fail2:
 810         ati_remote2_urb_cleanup(ar2);
 811         usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 812  fail1:
 813         kfree(ar2);
 814
 815         return r;
 816 }
 817
 818 static void ati_remote2_disconnect(struct usb_interface *interface)
 819 {
 820         struct ati_remote2 *ar2;
 821         struct usb_host_interface *alt = interface->cur_altsetting;
 822
 823         if (alt->desc.bInterfaceNumber)
 824                 return;
 825
 826         ar2 = usb_get_intfdata(interface);
 827         usb_set_intfdata(interface, NULL);
 828
 829         input_unregister_device(ar2->idev);
 830
 831         sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
 832
 833         ati_remote2_urb_cleanup(ar2);
 834
 835         usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 836
 837         kfree(ar2);
 838 }
 839
 840 static int ati_remote2_suspend(struct usb_interface *interface,
 841                                pm_message_t message)
 842 {
 843         struct ati_remote2 *ar2;
 844         struct usb_host_interface *alt = interface->cur_altsetting;
 845
 846         if (alt->desc.bInterfaceNumber)
 847                 return 0;
 848
 849         ar2 = usb_get_intfdata(interface);
 850
 851         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 852
 853         mutex_lock(&ati_remote2_mutex);
 854
 855         if (ar2->flags & ATI_REMOTE2_OPENED)
 856                 ati_remote2_kill_urbs(ar2);
 857
 858         ar2->flags |= ATI_REMOTE2_SUSPENDED;
 859
 860         mutex_unlock(&ati_remote2_mutex);
 861
 862         return 0;
 863 }
 864
 865 static int ati_remote2_resume(struct usb_interface *interface)
 866 {
 867         struct ati_remote2 *ar2;
 868         struct usb_host_interface *alt = interface->cur_altsetting;
 869         int r = 0;
 870
 871         if (alt->desc.bInterfaceNumber)
 872                 return 0;
 873
 874         ar2 = usb_get_intfdata(interface);
 875
 876         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 877
 878         mutex_lock(&ati_remote2_mutex);
 879
 880         if (ar2->flags & ATI_REMOTE2_OPENED)
 881                 r = ati_remote2_submit_urbs(ar2);
 882
 883         if (!r)
 884                 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
 885
 886         mutex_unlock(&ati_remote2_mutex);
 887
 888         return r;
 889 }
 890
 891 static int ati_remote2_reset_resume(struct usb_interface *interface)
 892 {
 893         struct ati_remote2 *ar2;
 894         struct usb_host_interface *alt = interface->cur_altsetting;
 895         int r = 0;
 896
 897         if (alt->desc.bInterfaceNumber)
 898                 return 0;
 899
 900         ar2 = usb_get_intfdata(interface);
 901
 902         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 903
 904         mutex_lock(&ati_remote2_mutex);
 905
 906         r = ati_remote2_setup(ar2, ar2->channel_mask);
 907         if (r)
 908                 goto out;
 909
 910         if (ar2->flags & ATI_REMOTE2_OPENED)
 911                 r = ati_remote2_submit_urbs(ar2);
 912
 913         if (!r)
 914                 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
 915
 916  out:
 917         mutex_unlock(&ati_remote2_mutex);
 918
 919         return r;
 920 }
 921
 922 static int ati_remote2_pre_reset(struct usb_interface *interface)
 923 {
 924         struct ati_remote2 *ar2;
 925         struct usb_host_interface *alt = interface->cur_altsetting;
 926
 927         if (alt->desc.bInterfaceNumber)
 928                 return 0;
 929
 930         ar2 = usb_get_intfdata(interface);
 931
 932         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 933
 934         mutex_lock(&ati_remote2_mutex);
 935
 936         if (ar2->flags == ATI_REMOTE2_OPENED)
 937                 ati_remote2_kill_urbs(ar2);
 938
 939         return 0;
 940 }
 941
 942 static int ati_remote2_post_reset(struct usb_interface *interface)
 943 {
 944         struct ati_remote2 *ar2;
 945         struct usb_host_interface *alt = interface->cur_altsetting;
 946         int r = 0;
 947
 948         if (alt->desc.bInterfaceNumber)
 949                 return 0;
 950
 951         ar2 = usb_get_intfdata(interface);
 952
 953         dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 954
 955         if (ar2->flags == ATI_REMOTE2_OPENED)
 956                 r = ati_remote2_submit_urbs(ar2);
 957
 958         mutex_unlock(&ati_remote2_mutex);
 959
 960         return r;
 961 }
 962
 963 static int __init ati_remote2_init(void)
 964 {
 965         int r;
 966
 967         r = usb_register(&ati_remote2_driver);
 968         if (r)
 969                 printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
 970         else
 971                 printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
 972
 973         return r;
 974 }
 975
 976 static void __exit ati_remote2_exit(void)
 977 {
 978         usb_deregister(&ati_remote2_driver);
 979 }
 980
 981 module_init(ati_remote2_init);
 982 module_exit(ati_remote2_exit);