hide spinlock in linux/quota.h behind __KERNEL__
[linux-2.6/mini2440.git] / net / ipv4 / arp.c
blob7110779a0244598b17518c46cc4784370198f3d0
1 /* linux/net/ipv4/arp.c
3 * Version: $Id: arp.c,v 1.99 2001/08/30 22:55:42 davem Exp $
5 * Copyright (C) 1994 by Florian La Roche
7 * This module implements the Address Resolution Protocol ARP (RFC 826),
8 * which is used to convert IP addresses (or in the future maybe other
9 * high-level addresses) into a low-level hardware address (like an Ethernet
10 * address).
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
17 * Fixes:
18 * Alan Cox : Removed the Ethernet assumptions in
19 * Florian's code
20 * Alan Cox : Fixed some small errors in the ARP
21 * logic
22 * Alan Cox : Allow >4K in /proc
23 * Alan Cox : Make ARP add its own protocol entry
24 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
25 * Stephen Henson : Add AX25 support to arp_get_info()
26 * Alan Cox : Drop data when a device is downed.
27 * Alan Cox : Use init_timer().
28 * Alan Cox : Double lock fixes.
29 * Martin Seine : Move the arphdr structure
30 * to if_arp.h for compatibility.
31 * with BSD based programs.
32 * Andrew Tridgell : Added ARP netmask code and
33 * re-arranged proxy handling.
34 * Alan Cox : Changed to use notifiers.
35 * Niibe Yutaka : Reply for this device or proxies only.
36 * Alan Cox : Don't proxy across hardware types!
37 * Jonathan Naylor : Added support for NET/ROM.
38 * Mike Shaver : RFC1122 checks.
39 * Jonathan Naylor : Only lookup the hardware address for
40 * the correct hardware type.
41 * Germano Caronni : Assorted subtle races.
42 * Craig Schlenter : Don't modify permanent entry
43 * during arp_rcv.
44 * Russ Nelson : Tidied up a few bits.
45 * Alexey Kuznetsov: Major changes to caching and behaviour,
46 * eg intelligent arp probing and
47 * generation
48 * of host down events.
49 * Alan Cox : Missing unlock in device events.
50 * Eckes : ARP ioctl control errors.
51 * Alexey Kuznetsov: Arp free fix.
52 * Manuel Rodriguez: Gratuitous ARP.
53 * Jonathan Layes : Added arpd support through kerneld
54 * message queue (960314)
55 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
56 * Mike McLagan : Routing by source
57 * Stuart Cheshire : Metricom and grat arp fixes
58 * *** FOR 2.1 clean this up ***
59 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
60 * Alan Cox : Took the AP1000 nasty FDDI hack and
61 * folded into the mainstream FDDI code.
62 * Ack spit, Linus how did you allow that
63 * one in...
64 * Jes Sorensen : Make FDDI work again in 2.1.x and
65 * clean up the APFDDI & gen. FDDI bits.
66 * Alexey Kuznetsov: new arp state machine;
67 * now it is in net/core/neighbour.c.
68 * Krzysztof Halasa: Added Frame Relay ARP support.
69 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
70 * Shmulik Hen: Split arp_send to arp_create and
71 * arp_xmit so intermediate drivers like
72 * bonding can change the skb before
73 * sending (e.g. insert 8021q tag).
74 * Harald Welte : convert to make use of jenkins hash
77 #include <linux/module.h>
78 #include <linux/types.h>
79 #include <linux/string.h>
80 #include <linux/kernel.h>
81 #include <linux/capability.h>
82 #include <linux/socket.h>
83 #include <linux/sockios.h>
84 #include <linux/errno.h>
85 #include <linux/in.h>
86 #include <linux/mm.h>
87 #include <linux/inet.h>
88 #include <linux/inetdevice.h>
89 #include <linux/netdevice.h>
90 #include <linux/etherdevice.h>
91 #include <linux/fddidevice.h>
92 #include <linux/if_arp.h>
93 #include <linux/trdevice.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/jhash.h>
102 #ifdef CONFIG_SYSCTL
103 #include <linux/sysctl.h>
104 #endif
106 #include <net/ip.h>
107 #include <net/icmp.h>
108 #include <net/route.h>
109 #include <net/protocol.h>
110 #include <net/tcp.h>
111 #include <net/sock.h>
112 #include <net/arp.h>
113 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
114 #include <net/ax25.h>
115 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
116 #include <net/netrom.h>
117 #endif
118 #endif
119 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
120 #include <net/atmclip.h>
121 struct neigh_table *clip_tbl_hook;
122 #endif
124 #include <asm/system.h>
125 #include <asm/uaccess.h>
127 #include <linux/netfilter_arp.h>
130 * Interface to generic neighbour cache.
132 static u32 arp_hash(const void *pkey, const struct net_device *dev);
133 static int arp_constructor(struct neighbour *neigh);
134 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
135 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
136 static void parp_redo(struct sk_buff *skb);
138 static struct neigh_ops arp_generic_ops = {
139 .family = AF_INET,
140 .solicit = arp_solicit,
141 .error_report = arp_error_report,
142 .output = neigh_resolve_output,
143 .connected_output = neigh_connected_output,
144 .hh_output = dev_queue_xmit,
145 .queue_xmit = dev_queue_xmit,
148 static struct neigh_ops arp_hh_ops = {
149 .family = AF_INET,
150 .solicit = arp_solicit,
151 .error_report = arp_error_report,
152 .output = neigh_resolve_output,
153 .connected_output = neigh_resolve_output,
154 .hh_output = dev_queue_xmit,
155 .queue_xmit = dev_queue_xmit,
158 static struct neigh_ops arp_direct_ops = {
159 .family = AF_INET,
160 .output = dev_queue_xmit,
161 .connected_output = dev_queue_xmit,
162 .hh_output = dev_queue_xmit,
163 .queue_xmit = dev_queue_xmit,
166 struct neigh_ops arp_broken_ops = {
167 .family = AF_INET,
168 .solicit = arp_solicit,
169 .error_report = arp_error_report,
170 .output = neigh_compat_output,
171 .connected_output = neigh_compat_output,
172 .hh_output = dev_queue_xmit,
173 .queue_xmit = dev_queue_xmit,
176 struct neigh_table arp_tbl = {
177 .family = AF_INET,
178 .entry_size = sizeof(struct neighbour) + 4,
179 .key_len = 4,
180 .hash = arp_hash,
181 .constructor = arp_constructor,
182 .proxy_redo = parp_redo,
183 .id = "arp_cache",
184 .parms = {
185 .tbl = &arp_tbl,
186 .base_reachable_time = 30 * HZ,
187 .retrans_time = 1 * HZ,
188 .gc_staletime = 60 * HZ,
189 .reachable_time = 30 * HZ,
190 .delay_probe_time = 5 * HZ,
191 .queue_len = 3,
192 .ucast_probes = 3,
193 .mcast_probes = 3,
194 .anycast_delay = 1 * HZ,
195 .proxy_delay = (8 * HZ) / 10,
196 .proxy_qlen = 64,
197 .locktime = 1 * HZ,
199 .gc_interval = 30 * HZ,
200 .gc_thresh1 = 128,
201 .gc_thresh2 = 512,
202 .gc_thresh3 = 1024,
205 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
207 switch (dev->type) {
208 case ARPHRD_ETHER:
209 case ARPHRD_FDDI:
210 case ARPHRD_IEEE802:
211 ip_eth_mc_map(addr, haddr);
212 return 0;
213 case ARPHRD_IEEE802_TR:
214 ip_tr_mc_map(addr, haddr);
215 return 0;
216 case ARPHRD_INFINIBAND:
217 ip_ib_mc_map(addr, haddr);
218 return 0;
219 default:
220 if (dir) {
221 memcpy(haddr, dev->broadcast, dev->addr_len);
222 return 0;
225 return -EINVAL;
229 static u32 arp_hash(const void *pkey, const struct net_device *dev)
231 return jhash_2words(*(u32 *)pkey, dev->ifindex, arp_tbl.hash_rnd);
234 static int arp_constructor(struct neighbour *neigh)
236 __be32 addr = *(__be32*)neigh->primary_key;
237 struct net_device *dev = neigh->dev;
238 struct in_device *in_dev;
239 struct neigh_parms *parms;
241 neigh->type = inet_addr_type(addr);
243 rcu_read_lock();
244 in_dev = __in_dev_get_rcu(dev);
245 if (in_dev == NULL) {
246 rcu_read_unlock();
247 return -EINVAL;
250 parms = in_dev->arp_parms;
251 __neigh_parms_put(neigh->parms);
252 neigh->parms = neigh_parms_clone(parms);
253 rcu_read_unlock();
255 if (dev->hard_header == NULL) {
256 neigh->nud_state = NUD_NOARP;
257 neigh->ops = &arp_direct_ops;
258 neigh->output = neigh->ops->queue_xmit;
259 } else {
260 /* Good devices (checked by reading texts, but only Ethernet is
261 tested)
263 ARPHRD_ETHER: (ethernet, apfddi)
264 ARPHRD_FDDI: (fddi)
265 ARPHRD_IEEE802: (tr)
266 ARPHRD_METRICOM: (strip)
267 ARPHRD_ARCNET:
268 etc. etc. etc.
270 ARPHRD_IPDDP will also work, if author repairs it.
271 I did not it, because this driver does not work even
272 in old paradigm.
275 #if 1
276 /* So... these "amateur" devices are hopeless.
277 The only thing, that I can say now:
278 It is very sad that we need to keep ugly obsolete
279 code to make them happy.
281 They should be moved to more reasonable state, now
282 they use rebuild_header INSTEAD OF hard_start_xmit!!!
283 Besides that, they are sort of out of date
284 (a lot of redundant clones/copies, useless in 2.1),
285 I wonder why people believe that they work.
287 switch (dev->type) {
288 default:
289 break;
290 case ARPHRD_ROSE:
291 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
292 case ARPHRD_AX25:
293 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
294 case ARPHRD_NETROM:
295 #endif
296 neigh->ops = &arp_broken_ops;
297 neigh->output = neigh->ops->output;
298 return 0;
299 #endif
301 #endif
302 if (neigh->type == RTN_MULTICAST) {
303 neigh->nud_state = NUD_NOARP;
304 arp_mc_map(addr, neigh->ha, dev, 1);
305 } else if (dev->flags&(IFF_NOARP|IFF_LOOPBACK)) {
306 neigh->nud_state = NUD_NOARP;
307 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
308 } else if (neigh->type == RTN_BROADCAST || dev->flags&IFF_POINTOPOINT) {
309 neigh->nud_state = NUD_NOARP;
310 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
312 if (dev->hard_header_cache)
313 neigh->ops = &arp_hh_ops;
314 else
315 neigh->ops = &arp_generic_ops;
316 if (neigh->nud_state&NUD_VALID)
317 neigh->output = neigh->ops->connected_output;
318 else
319 neigh->output = neigh->ops->output;
321 return 0;
324 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
326 dst_link_failure(skb);
327 kfree_skb(skb);
330 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
332 __be32 saddr = 0;
333 u8 *dst_ha = NULL;
334 struct net_device *dev = neigh->dev;
335 __be32 target = *(__be32*)neigh->primary_key;
336 int probes = atomic_read(&neigh->probes);
337 struct in_device *in_dev = in_dev_get(dev);
339 if (!in_dev)
340 return;
342 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
343 default:
344 case 0: /* By default announce any local IP */
345 if (skb && inet_addr_type(ip_hdr(skb)->saddr) == RTN_LOCAL)
346 saddr = ip_hdr(skb)->saddr;
347 break;
348 case 1: /* Restrict announcements of saddr in same subnet */
349 if (!skb)
350 break;
351 saddr = ip_hdr(skb)->saddr;
352 if (inet_addr_type(saddr) == RTN_LOCAL) {
353 /* saddr should be known to target */
354 if (inet_addr_onlink(in_dev, target, saddr))
355 break;
357 saddr = 0;
358 break;
359 case 2: /* Avoid secondary IPs, get a primary/preferred one */
360 break;
363 if (in_dev)
364 in_dev_put(in_dev);
365 if (!saddr)
366 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
368 if ((probes -= neigh->parms->ucast_probes) < 0) {
369 if (!(neigh->nud_state&NUD_VALID))
370 printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
371 dst_ha = neigh->ha;
372 read_lock_bh(&neigh->lock);
373 } else if ((probes -= neigh->parms->app_probes) < 0) {
374 #ifdef CONFIG_ARPD
375 neigh_app_ns(neigh);
376 #endif
377 return;
380 arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
381 dst_ha, dev->dev_addr, NULL);
382 if (dst_ha)
383 read_unlock_bh(&neigh->lock);
386 static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
387 __be32 sip, __be32 tip)
389 int scope;
391 switch (IN_DEV_ARP_IGNORE(in_dev)) {
392 case 0: /* Reply, the tip is already validated */
393 return 0;
394 case 1: /* Reply only if tip is configured on the incoming interface */
395 sip = 0;
396 scope = RT_SCOPE_HOST;
397 break;
398 case 2: /*
399 * Reply only if tip is configured on the incoming interface
400 * and is in same subnet as sip
402 scope = RT_SCOPE_HOST;
403 break;
404 case 3: /* Do not reply for scope host addresses */
405 sip = 0;
406 scope = RT_SCOPE_LINK;
407 dev = NULL;
408 break;
409 case 4: /* Reserved */
410 case 5:
411 case 6:
412 case 7:
413 return 0;
414 case 8: /* Do not reply */
415 return 1;
416 default:
417 return 0;
419 return !inet_confirm_addr(dev, sip, tip, scope);
422 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
424 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
425 .saddr = tip } } };
426 struct rtable *rt;
427 int flag = 0;
428 /*unsigned long now; */
430 if (ip_route_output_key(&rt, &fl) < 0)
431 return 1;
432 if (rt->u.dst.dev != dev) {
433 NET_INC_STATS_BH(LINUX_MIB_ARPFILTER);
434 flag = 1;
436 ip_rt_put(rt);
437 return flag;
440 /* OBSOLETE FUNCTIONS */
443 * Find an arp mapping in the cache. If not found, post a request.
445 * It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
446 * even if it exists. It is supposed that skb->dev was mangled
447 * by a virtual device (eql, shaper). Nobody but broken devices
448 * is allowed to use this function, it is scheduled to be removed. --ANK
451 static int arp_set_predefined(int addr_hint, unsigned char * haddr, __be32 paddr, struct net_device * dev)
453 switch (addr_hint) {
454 case RTN_LOCAL:
455 printk(KERN_DEBUG "ARP: arp called for own IP address\n");
456 memcpy(haddr, dev->dev_addr, dev->addr_len);
457 return 1;
458 case RTN_MULTICAST:
459 arp_mc_map(paddr, haddr, dev, 1);
460 return 1;
461 case RTN_BROADCAST:
462 memcpy(haddr, dev->broadcast, dev->addr_len);
463 return 1;
465 return 0;
469 int arp_find(unsigned char *haddr, struct sk_buff *skb)
471 struct net_device *dev = skb->dev;
472 __be32 paddr;
473 struct neighbour *n;
475 if (!skb->dst) {
476 printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
477 kfree_skb(skb);
478 return 1;
481 paddr = ((struct rtable*)skb->dst)->rt_gateway;
483 if (arp_set_predefined(inet_addr_type(paddr), haddr, paddr, dev))
484 return 0;
486 n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
488 if (n) {
489 n->used = jiffies;
490 if (n->nud_state&NUD_VALID || neigh_event_send(n, skb) == 0) {
491 read_lock_bh(&n->lock);
492 memcpy(haddr, n->ha, dev->addr_len);
493 read_unlock_bh(&n->lock);
494 neigh_release(n);
495 return 0;
497 neigh_release(n);
498 } else
499 kfree_skb(skb);
500 return 1;
503 /* END OF OBSOLETE FUNCTIONS */
505 int arp_bind_neighbour(struct dst_entry *dst)
507 struct net_device *dev = dst->dev;
508 struct neighbour *n = dst->neighbour;
510 if (dev == NULL)
511 return -EINVAL;
512 if (n == NULL) {
513 __be32 nexthop = ((struct rtable*)dst)->rt_gateway;
514 if (dev->flags&(IFF_LOOPBACK|IFF_POINTOPOINT))
515 nexthop = 0;
516 n = __neigh_lookup_errno(
517 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
518 dev->type == ARPHRD_ATM ? clip_tbl_hook :
519 #endif
520 &arp_tbl, &nexthop, dev);
521 if (IS_ERR(n))
522 return PTR_ERR(n);
523 dst->neighbour = n;
525 return 0;
529 * Check if we can use proxy ARP for this path
532 static inline int arp_fwd_proxy(struct in_device *in_dev, struct rtable *rt)
534 struct in_device *out_dev;
535 int imi, omi = -1;
537 if (!IN_DEV_PROXY_ARP(in_dev))
538 return 0;
540 if ((imi = IN_DEV_MEDIUM_ID(in_dev)) == 0)
541 return 1;
542 if (imi == -1)
543 return 0;
545 /* place to check for proxy_arp for routes */
547 if ((out_dev = in_dev_get(rt->u.dst.dev)) != NULL) {
548 omi = IN_DEV_MEDIUM_ID(out_dev);
549 in_dev_put(out_dev);
551 return (omi != imi && omi != -1);
555 * Interface to link layer: send routine and receive handler.
559 * Create an arp packet. If (dest_hw == NULL), we create a broadcast
560 * message.
562 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
563 struct net_device *dev, __be32 src_ip,
564 unsigned char *dest_hw, unsigned char *src_hw,
565 unsigned char *target_hw)
567 struct sk_buff *skb;
568 struct arphdr *arp;
569 unsigned char *arp_ptr;
572 * Allocate a buffer
575 skb = alloc_skb(sizeof(struct arphdr)+ 2*(dev->addr_len+4)
576 + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
577 if (skb == NULL)
578 return NULL;
580 skb_reserve(skb, LL_RESERVED_SPACE(dev));
581 skb_reset_network_header(skb);
582 arp = (struct arphdr *) skb_put(skb,sizeof(struct arphdr) + 2*(dev->addr_len+4));
583 skb->dev = dev;
584 skb->protocol = htons(ETH_P_ARP);
585 if (src_hw == NULL)
586 src_hw = dev->dev_addr;
587 if (dest_hw == NULL)
588 dest_hw = dev->broadcast;
591 * Fill the device header for the ARP frame
593 if (dev->hard_header &&
594 dev->hard_header(skb,dev,ptype,dest_hw,src_hw,skb->len) < 0)
595 goto out;
598 * Fill out the arp protocol part.
600 * The arp hardware type should match the device type, except for FDDI,
601 * which (according to RFC 1390) should always equal 1 (Ethernet).
604 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
605 * DIX code for the protocol. Make these device structure fields.
607 switch (dev->type) {
608 default:
609 arp->ar_hrd = htons(dev->type);
610 arp->ar_pro = htons(ETH_P_IP);
611 break;
613 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
614 case ARPHRD_AX25:
615 arp->ar_hrd = htons(ARPHRD_AX25);
616 arp->ar_pro = htons(AX25_P_IP);
617 break;
619 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
620 case ARPHRD_NETROM:
621 arp->ar_hrd = htons(ARPHRD_NETROM);
622 arp->ar_pro = htons(AX25_P_IP);
623 break;
624 #endif
625 #endif
627 #ifdef CONFIG_FDDI
628 case ARPHRD_FDDI:
629 arp->ar_hrd = htons(ARPHRD_ETHER);
630 arp->ar_pro = htons(ETH_P_IP);
631 break;
632 #endif
633 #ifdef CONFIG_TR
634 case ARPHRD_IEEE802_TR:
635 arp->ar_hrd = htons(ARPHRD_IEEE802);
636 arp->ar_pro = htons(ETH_P_IP);
637 break;
638 #endif
641 arp->ar_hln = dev->addr_len;
642 arp->ar_pln = 4;
643 arp->ar_op = htons(type);
645 arp_ptr=(unsigned char *)(arp+1);
647 memcpy(arp_ptr, src_hw, dev->addr_len);
648 arp_ptr+=dev->addr_len;
649 memcpy(arp_ptr, &src_ip,4);
650 arp_ptr+=4;
651 if (target_hw != NULL)
652 memcpy(arp_ptr, target_hw, dev->addr_len);
653 else
654 memset(arp_ptr, 0, dev->addr_len);
655 arp_ptr+=dev->addr_len;
656 memcpy(arp_ptr, &dest_ip, 4);
658 return skb;
660 out:
661 kfree_skb(skb);
662 return NULL;
666 * Send an arp packet.
668 void arp_xmit(struct sk_buff *skb)
670 /* Send it off, maybe filter it using firewalling first. */
671 NF_HOOK(NF_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
675 * Create and send an arp packet.
677 void arp_send(int type, int ptype, __be32 dest_ip,
678 struct net_device *dev, __be32 src_ip,
679 unsigned char *dest_hw, unsigned char *src_hw,
680 unsigned char *target_hw)
682 struct sk_buff *skb;
685 * No arp on this interface.
688 if (dev->flags&IFF_NOARP)
689 return;
691 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
692 dest_hw, src_hw, target_hw);
693 if (skb == NULL) {
694 return;
697 arp_xmit(skb);
701 * Process an arp request.
704 static int arp_process(struct sk_buff *skb)
706 struct net_device *dev = skb->dev;
707 struct in_device *in_dev = in_dev_get(dev);
708 struct arphdr *arp;
709 unsigned char *arp_ptr;
710 struct rtable *rt;
711 unsigned char *sha, *tha;
712 __be32 sip, tip;
713 u16 dev_type = dev->type;
714 int addr_type;
715 struct neighbour *n;
717 /* arp_rcv below verifies the ARP header and verifies the device
718 * is ARP'able.
721 if (in_dev == NULL)
722 goto out;
724 arp = arp_hdr(skb);
726 switch (dev_type) {
727 default:
728 if (arp->ar_pro != htons(ETH_P_IP) ||
729 htons(dev_type) != arp->ar_hrd)
730 goto out;
731 break;
732 #ifdef CONFIG_NET_ETHERNET
733 case ARPHRD_ETHER:
734 #endif
735 #ifdef CONFIG_TR
736 case ARPHRD_IEEE802_TR:
737 #endif
738 #ifdef CONFIG_FDDI
739 case ARPHRD_FDDI:
740 #endif
741 #ifdef CONFIG_NET_FC
742 case ARPHRD_IEEE802:
743 #endif
744 #if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
745 defined(CONFIG_FDDI) || defined(CONFIG_NET_FC)
747 * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
748 * devices, according to RFC 2625) devices will accept ARP
749 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
750 * This is the case also of FDDI, where the RFC 1390 says that
751 * FDDI devices should accept ARP hardware of (1) Ethernet,
752 * however, to be more robust, we'll accept both 1 (Ethernet)
753 * or 6 (IEEE 802.2)
755 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
756 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
757 arp->ar_pro != htons(ETH_P_IP))
758 goto out;
759 break;
760 #endif
761 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
762 case ARPHRD_AX25:
763 if (arp->ar_pro != htons(AX25_P_IP) ||
764 arp->ar_hrd != htons(ARPHRD_AX25))
765 goto out;
766 break;
767 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
768 case ARPHRD_NETROM:
769 if (arp->ar_pro != htons(AX25_P_IP) ||
770 arp->ar_hrd != htons(ARPHRD_NETROM))
771 goto out;
772 break;
773 #endif
774 #endif
777 /* Understand only these message types */
779 if (arp->ar_op != htons(ARPOP_REPLY) &&
780 arp->ar_op != htons(ARPOP_REQUEST))
781 goto out;
784 * Extract fields
786 arp_ptr= (unsigned char *)(arp+1);
787 sha = arp_ptr;
788 arp_ptr += dev->addr_len;
789 memcpy(&sip, arp_ptr, 4);
790 arp_ptr += 4;
791 tha = arp_ptr;
792 arp_ptr += dev->addr_len;
793 memcpy(&tip, arp_ptr, 4);
795 * Check for bad requests for 127.x.x.x and requests for multicast
796 * addresses. If this is one such, delete it.
798 if (LOOPBACK(tip) || MULTICAST(tip))
799 goto out;
802 * Special case: We must set Frame Relay source Q.922 address
804 if (dev_type == ARPHRD_DLCI)
805 sha = dev->broadcast;
808 * Process entry. The idea here is we want to send a reply if it is a
809 * request for us or if it is a request for someone else that we hold
810 * a proxy for. We want to add an entry to our cache if it is a reply
811 * to us or if it is a request for our address.
812 * (The assumption for this last is that if someone is requesting our
813 * address, they are probably intending to talk to us, so it saves time
814 * if we cache their address. Their address is also probably not in
815 * our cache, since ours is not in their cache.)
817 * Putting this another way, we only care about replies if they are to
818 * us, in which case we add them to the cache. For requests, we care
819 * about those for us and those for our proxies. We reply to both,
820 * and in the case of requests for us we add the requester to the arp
821 * cache.
824 /* Special case: IPv4 duplicate address detection packet (RFC2131) */
825 if (sip == 0) {
826 if (arp->ar_op == htons(ARPOP_REQUEST) &&
827 inet_addr_type(tip) == RTN_LOCAL &&
828 !arp_ignore(in_dev,dev,sip,tip))
829 arp_send(ARPOP_REPLY,ETH_P_ARP,tip,dev,tip,sha,dev->dev_addr,dev->dev_addr);
830 goto out;
833 if (arp->ar_op == htons(ARPOP_REQUEST) &&
834 ip_route_input(skb, tip, sip, 0, dev) == 0) {
836 rt = (struct rtable*)skb->dst;
837 addr_type = rt->rt_type;
839 if (addr_type == RTN_LOCAL) {
840 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
841 if (n) {
842 int dont_send = 0;
844 if (!dont_send)
845 dont_send |= arp_ignore(in_dev,dev,sip,tip);
846 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
847 dont_send |= arp_filter(sip,tip,dev);
848 if (!dont_send)
849 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
851 neigh_release(n);
853 goto out;
854 } else if (IN_DEV_FORWARD(in_dev)) {
855 if ((rt->rt_flags&RTCF_DNAT) ||
856 (addr_type == RTN_UNICAST && rt->u.dst.dev != dev &&
857 (arp_fwd_proxy(in_dev, rt) || pneigh_lookup(&arp_tbl, &tip, dev, 0)))) {
858 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
859 if (n)
860 neigh_release(n);
862 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
863 skb->pkt_type == PACKET_HOST ||
864 in_dev->arp_parms->proxy_delay == 0) {
865 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
866 } else {
867 pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb);
868 in_dev_put(in_dev);
869 return 0;
871 goto out;
876 /* Update our ARP tables */
878 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
880 if (ipv4_devconf.arp_accept) {
881 /* Unsolicited ARP is not accepted by default.
882 It is possible, that this option should be enabled for some
883 devices (strip is candidate)
885 if (n == NULL &&
886 arp->ar_op == htons(ARPOP_REPLY) &&
887 inet_addr_type(sip) == RTN_UNICAST)
888 n = __neigh_lookup(&arp_tbl, &sip, dev, -1);
891 if (n) {
892 int state = NUD_REACHABLE;
893 int override;
895 /* If several different ARP replies follows back-to-back,
896 use the FIRST one. It is possible, if several proxy
897 agents are active. Taking the first reply prevents
898 arp trashing and chooses the fastest router.
900 override = time_after(jiffies, n->updated + n->parms->locktime);
902 /* Broadcast replies and request packets
903 do not assert neighbour reachability.
905 if (arp->ar_op != htons(ARPOP_REPLY) ||
906 skb->pkt_type != PACKET_HOST)
907 state = NUD_STALE;
908 neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0);
909 neigh_release(n);
912 out:
913 if (in_dev)
914 in_dev_put(in_dev);
915 kfree_skb(skb);
916 return 0;
919 static void parp_redo(struct sk_buff *skb)
921 arp_process(skb);
926 * Receive an arp request from the device layer.
929 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
930 struct packet_type *pt, struct net_device *orig_dev)
932 struct arphdr *arp;
934 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
935 if (!pskb_may_pull(skb, (sizeof(struct arphdr) +
936 (2 * dev->addr_len) +
937 (2 * sizeof(u32)))))
938 goto freeskb;
940 arp = arp_hdr(skb);
941 if (arp->ar_hln != dev->addr_len ||
942 dev->flags & IFF_NOARP ||
943 skb->pkt_type == PACKET_OTHERHOST ||
944 skb->pkt_type == PACKET_LOOPBACK ||
945 arp->ar_pln != 4)
946 goto freeskb;
948 if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
949 goto out_of_mem;
951 memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
953 return NF_HOOK(NF_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
955 freeskb:
956 kfree_skb(skb);
957 out_of_mem:
958 return 0;
962 * User level interface (ioctl)
966 * Set (create) an ARP cache entry.
969 static int arp_req_set(struct arpreq *r, struct net_device * dev)
971 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
972 struct neighbour *neigh;
973 int err;
975 if (r->arp_flags&ATF_PUBL) {
976 __be32 mask = ((struct sockaddr_in *) &r->arp_netmask)->sin_addr.s_addr;
977 if (mask && mask != htonl(0xFFFFFFFF))
978 return -EINVAL;
979 if (!dev && (r->arp_flags & ATF_COM)) {
980 dev = dev_getbyhwaddr(r->arp_ha.sa_family, r->arp_ha.sa_data);
981 if (!dev)
982 return -ENODEV;
984 if (mask) {
985 if (pneigh_lookup(&arp_tbl, &ip, dev, 1) == NULL)
986 return -ENOBUFS;
987 return 0;
989 if (dev == NULL) {
990 ipv4_devconf.proxy_arp = 1;
991 return 0;
993 if (__in_dev_get_rtnl(dev)) {
994 __in_dev_get_rtnl(dev)->cnf.proxy_arp = 1;
995 return 0;
997 return -ENXIO;
1000 if (r->arp_flags & ATF_PERM)
1001 r->arp_flags |= ATF_COM;
1002 if (dev == NULL) {
1003 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1004 .tos = RTO_ONLINK } } };
1005 struct rtable * rt;
1006 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1007 return err;
1008 dev = rt->u.dst.dev;
1009 ip_rt_put(rt);
1010 if (!dev)
1011 return -EINVAL;
1013 switch (dev->type) {
1014 #ifdef CONFIG_FDDI
1015 case ARPHRD_FDDI:
1017 * According to RFC 1390, FDDI devices should accept ARP
1018 * hardware types of 1 (Ethernet). However, to be more
1019 * robust, we'll accept hardware types of either 1 (Ethernet)
1020 * or 6 (IEEE 802.2).
1022 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1023 r->arp_ha.sa_family != ARPHRD_ETHER &&
1024 r->arp_ha.sa_family != ARPHRD_IEEE802)
1025 return -EINVAL;
1026 break;
1027 #endif
1028 default:
1029 if (r->arp_ha.sa_family != dev->type)
1030 return -EINVAL;
1031 break;
1034 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1035 err = PTR_ERR(neigh);
1036 if (!IS_ERR(neigh)) {
1037 unsigned state = NUD_STALE;
1038 if (r->arp_flags & ATF_PERM)
1039 state = NUD_PERMANENT;
1040 err = neigh_update(neigh, (r->arp_flags&ATF_COM) ?
1041 r->arp_ha.sa_data : NULL, state,
1042 NEIGH_UPDATE_F_OVERRIDE|
1043 NEIGH_UPDATE_F_ADMIN);
1044 neigh_release(neigh);
1046 return err;
1049 static unsigned arp_state_to_flags(struct neighbour *neigh)
1051 unsigned flags = 0;
1052 if (neigh->nud_state&NUD_PERMANENT)
1053 flags = ATF_PERM|ATF_COM;
1054 else if (neigh->nud_state&NUD_VALID)
1055 flags = ATF_COM;
1056 return flags;
1060 * Get an ARP cache entry.
1063 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1065 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1066 struct neighbour *neigh;
1067 int err = -ENXIO;
1069 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1070 if (neigh) {
1071 read_lock_bh(&neigh->lock);
1072 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1073 r->arp_flags = arp_state_to_flags(neigh);
1074 read_unlock_bh(&neigh->lock);
1075 r->arp_ha.sa_family = dev->type;
1076 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1077 neigh_release(neigh);
1078 err = 0;
1080 return err;
1083 static int arp_req_delete(struct arpreq *r, struct net_device * dev)
1085 int err;
1086 __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1087 struct neighbour *neigh;
1089 if (r->arp_flags & ATF_PUBL) {
1090 __be32 mask =
1091 ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1092 if (mask == htonl(0xFFFFFFFF))
1093 return pneigh_delete(&arp_tbl, &ip, dev);
1094 if (mask == 0) {
1095 if (dev == NULL) {
1096 ipv4_devconf.proxy_arp = 0;
1097 return 0;
1099 if (__in_dev_get_rtnl(dev)) {
1100 __in_dev_get_rtnl(dev)->cnf.proxy_arp = 0;
1101 return 0;
1103 return -ENXIO;
1105 return -EINVAL;
1108 if (dev == NULL) {
1109 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1110 .tos = RTO_ONLINK } } };
1111 struct rtable * rt;
1112 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1113 return err;
1114 dev = rt->u.dst.dev;
1115 ip_rt_put(rt);
1116 if (!dev)
1117 return -EINVAL;
1119 err = -ENXIO;
1120 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1121 if (neigh) {
1122 if (neigh->nud_state&~NUD_NOARP)
1123 err = neigh_update(neigh, NULL, NUD_FAILED,
1124 NEIGH_UPDATE_F_OVERRIDE|
1125 NEIGH_UPDATE_F_ADMIN);
1126 neigh_release(neigh);
1128 return err;
1132 * Handle an ARP layer I/O control request.
1135 int arp_ioctl(unsigned int cmd, void __user *arg)
1137 int err;
1138 struct arpreq r;
1139 struct net_device *dev = NULL;
1141 switch (cmd) {
1142 case SIOCDARP:
1143 case SIOCSARP:
1144 if (!capable(CAP_NET_ADMIN))
1145 return -EPERM;
1146 case SIOCGARP:
1147 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1148 if (err)
1149 return -EFAULT;
1150 break;
1151 default:
1152 return -EINVAL;
1155 if (r.arp_pa.sa_family != AF_INET)
1156 return -EPFNOSUPPORT;
1158 if (!(r.arp_flags & ATF_PUBL) &&
1159 (r.arp_flags & (ATF_NETMASK|ATF_DONTPUB)))
1160 return -EINVAL;
1161 if (!(r.arp_flags & ATF_NETMASK))
1162 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1163 htonl(0xFFFFFFFFUL);
1164 rtnl_lock();
1165 if (r.arp_dev[0]) {
1166 err = -ENODEV;
1167 if ((dev = __dev_get_by_name(r.arp_dev)) == NULL)
1168 goto out;
1170 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1171 if (!r.arp_ha.sa_family)
1172 r.arp_ha.sa_family = dev->type;
1173 err = -EINVAL;
1174 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1175 goto out;
1176 } else if (cmd == SIOCGARP) {
1177 err = -ENODEV;
1178 goto out;
1181 switch (cmd) {
1182 case SIOCDARP:
1183 err = arp_req_delete(&r, dev);
1184 break;
1185 case SIOCSARP:
1186 err = arp_req_set(&r, dev);
1187 break;
1188 case SIOCGARP:
1189 err = arp_req_get(&r, dev);
1190 if (!err && copy_to_user(arg, &r, sizeof(r)))
1191 err = -EFAULT;
1192 break;
1194 out:
1195 rtnl_unlock();
1196 return err;
1199 static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
1201 struct net_device *dev = ptr;
1203 switch (event) {
1204 case NETDEV_CHANGEADDR:
1205 neigh_changeaddr(&arp_tbl, dev);
1206 rt_cache_flush(0);
1207 break;
1208 default:
1209 break;
1212 return NOTIFY_DONE;
1215 static struct notifier_block arp_netdev_notifier = {
1216 .notifier_call = arp_netdev_event,
1219 /* Note, that it is not on notifier chain.
1220 It is necessary, that this routine was called after route cache will be
1221 flushed.
1223 void arp_ifdown(struct net_device *dev)
1225 neigh_ifdown(&arp_tbl, dev);
1230 * Called once on startup.
1233 static struct packet_type arp_packet_type = {
1234 .type = __constant_htons(ETH_P_ARP),
1235 .func = arp_rcv,
1238 static int arp_proc_init(void);
1240 void __init arp_init(void)
1242 neigh_table_init(&arp_tbl);
1244 dev_add_pack(&arp_packet_type);
1245 arp_proc_init();
1246 #ifdef CONFIG_SYSCTL
1247 neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
1248 NET_IPV4_NEIGH, "ipv4", NULL, NULL);
1249 #endif
1250 register_netdevice_notifier(&arp_netdev_notifier);
1253 #ifdef CONFIG_PROC_FS
1254 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1256 /* ------------------------------------------------------------------------ */
1258 * ax25 -> ASCII conversion
1260 static char *ax2asc2(ax25_address *a, char *buf)
1262 char c, *s;
1263 int n;
1265 for (n = 0, s = buf; n < 6; n++) {
1266 c = (a->ax25_call[n] >> 1) & 0x7F;
1268 if (c != ' ') *s++ = c;
1271 *s++ = '-';
1273 if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
1274 *s++ = '1';
1275 n -= 10;
1278 *s++ = n + '0';
1279 *s++ = '\0';
1281 if (*buf == '\0' || *buf == '-')
1282 return "*";
1284 return buf;
1287 #endif /* CONFIG_AX25 */
1289 #define HBUFFERLEN 30
1291 static void arp_format_neigh_entry(struct seq_file *seq,
1292 struct neighbour *n)
1294 char hbuffer[HBUFFERLEN];
1295 const char hexbuf[] = "0123456789ABCDEF";
1296 int k, j;
1297 char tbuf[16];
1298 struct net_device *dev = n->dev;
1299 int hatype = dev->type;
1301 read_lock(&n->lock);
1302 /* Convert hardware address to XX:XX:XX:XX ... form. */
1303 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1304 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1305 ax2asc2((ax25_address *)n->ha, hbuffer);
1306 else {
1307 #endif
1308 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1309 hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
1310 hbuffer[k++] = hexbuf[n->ha[j] & 15];
1311 hbuffer[k++] = ':';
1313 hbuffer[--k] = 0;
1314 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1316 #endif
1317 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->primary_key));
1318 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1319 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1320 read_unlock(&n->lock);
1323 static void arp_format_pneigh_entry(struct seq_file *seq,
1324 struct pneigh_entry *n)
1326 struct net_device *dev = n->dev;
1327 int hatype = dev ? dev->type : 0;
1328 char tbuf[16];
1330 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->key));
1331 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1332 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1333 dev ? dev->name : "*");
1336 static int arp_seq_show(struct seq_file *seq, void *v)
1338 if (v == SEQ_START_TOKEN) {
1339 seq_puts(seq, "IP address HW type Flags "
1340 "HW address Mask Device\n");
1341 } else {
1342 struct neigh_seq_state *state = seq->private;
1344 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1345 arp_format_pneigh_entry(seq, v);
1346 else
1347 arp_format_neigh_entry(seq, v);
1350 return 0;
1353 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1355 /* Don't want to confuse "arp -a" w/ magic entries,
1356 * so we tell the generic iterator to skip NUD_NOARP.
1358 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1361 /* ------------------------------------------------------------------------ */
1363 static const struct seq_operations arp_seq_ops = {
1364 .start = arp_seq_start,
1365 .next = neigh_seq_next,
1366 .stop = neigh_seq_stop,
1367 .show = arp_seq_show,
1370 static int arp_seq_open(struct inode *inode, struct file *file)
1372 struct seq_file *seq;
1373 int rc = -ENOMEM;
1374 struct neigh_seq_state *s = kzalloc(sizeof(*s), GFP_KERNEL);
1376 if (!s)
1377 goto out;
1379 rc = seq_open(file, &arp_seq_ops);
1380 if (rc)
1381 goto out_kfree;
1383 seq = file->private_data;
1384 seq->private = s;
1385 out:
1386 return rc;
1387 out_kfree:
1388 kfree(s);
1389 goto out;
1392 static const struct file_operations arp_seq_fops = {
1393 .owner = THIS_MODULE,
1394 .open = arp_seq_open,
1395 .read = seq_read,
1396 .llseek = seq_lseek,
1397 .release = seq_release_private,
1400 static int __init arp_proc_init(void)
1402 if (!proc_net_fops_create("arp", S_IRUGO, &arp_seq_fops))
1403 return -ENOMEM;
1404 return 0;
1407 #else /* CONFIG_PROC_FS */
1409 static int __init arp_proc_init(void)
1411 return 0;
1414 #endif /* CONFIG_PROC_FS */
1416 EXPORT_SYMBOL(arp_broken_ops);
1417 EXPORT_SYMBOL(arp_find);
1418 EXPORT_SYMBOL(arp_create);
1419 EXPORT_SYMBOL(arp_xmit);
1420 EXPORT_SYMBOL(arp_send);
1421 EXPORT_SYMBOL(arp_tbl);
1423 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
1424 EXPORT_SYMBOL(clip_tbl_hook);
1425 #endif