Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
[linux-2.6/mini2440.git] / drivers / scsi / aic94xx / aic94xx_seq.c
blob8f98e33155e9dbd9e8c391544a08ef5bd306c5ec
1 /*
2 * Aic94xx SAS/SATA driver sequencer interface.
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * Parts of this code adapted from David Chaw's adp94xx_seq.c.
9 * This file is licensed under GPLv2.
11 * This file is part of the aic94xx driver.
13 * The aic94xx driver is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; version 2 of the
16 * License.
18 * The aic94xx driver is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 * General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with the aic94xx driver; if not, write to the Free Software
25 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 #include <linux/delay.h>
30 #include <linux/pci.h>
31 #include <linux/module.h>
32 #include <linux/firmware.h>
33 #include "aic94xx_reg.h"
34 #include "aic94xx_hwi.h"
36 #include "aic94xx_seq.h"
37 #include "aic94xx_dump.h"
39 /* It takes no more than 0.05 us for an instruction
40 * to complete. So waiting for 1 us should be more than
41 * plenty.
43 #define PAUSE_DELAY 1
44 #define PAUSE_TRIES 1000
46 static const struct firmware *sequencer_fw;
47 static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
48 cseq_idle_loop, lseq_idle_loop;
49 static const u8 *cseq_code, *lseq_code;
50 static u32 cseq_code_size, lseq_code_size;
52 static u16 first_scb_site_no = 0xFFFF;
53 static u16 last_scb_site_no;
55 /* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
57 /**
58 * asd_pause_cseq - pause the central sequencer
59 * @asd_ha: pointer to host adapter structure
61 * Return 0 on success, negative on failure.
63 static int asd_pause_cseq(struct asd_ha_struct *asd_ha)
65 int count = PAUSE_TRIES;
66 u32 arp2ctl;
68 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
69 if (arp2ctl & PAUSED)
70 return 0;
72 asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
73 do {
74 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
75 if (arp2ctl & PAUSED)
76 return 0;
77 udelay(PAUSE_DELAY);
78 } while (--count > 0);
80 ASD_DPRINTK("couldn't pause CSEQ\n");
81 return -1;
84 /**
85 * asd_unpause_cseq - unpause the central sequencer.
86 * @asd_ha: pointer to host adapter structure.
88 * Return 0 on success, negative on error.
90 static int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
92 u32 arp2ctl;
93 int count = PAUSE_TRIES;
95 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
96 if (!(arp2ctl & PAUSED))
97 return 0;
99 asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
100 do {
101 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
102 if (!(arp2ctl & PAUSED))
103 return 0;
104 udelay(PAUSE_DELAY);
105 } while (--count > 0);
107 ASD_DPRINTK("couldn't unpause the CSEQ\n");
108 return -1;
112 * asd_seq_pause_lseq - pause a link sequencer
113 * @asd_ha: pointer to a host adapter structure
114 * @lseq: link sequencer of interest
116 * Return 0 on success, negative on error.
118 static int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
120 u32 arp2ctl;
121 int count = PAUSE_TRIES;
123 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
124 if (arp2ctl & PAUSED)
125 return 0;
127 asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
128 do {
129 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
130 if (arp2ctl & PAUSED)
131 return 0;
132 udelay(PAUSE_DELAY);
133 } while (--count > 0);
135 ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
136 return -1;
140 * asd_pause_lseq - pause the link sequencer(s)
141 * @asd_ha: pointer to host adapter structure
142 * @lseq_mask: mask of link sequencers of interest
144 * Return 0 on success, negative on failure.
146 static int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
148 int lseq;
149 int err = 0;
151 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
152 err = asd_seq_pause_lseq(asd_ha, lseq);
153 if (err)
154 return err;
157 return err;
161 * asd_seq_unpause_lseq - unpause a link sequencer
162 * @asd_ha: pointer to host adapter structure
163 * @lseq: link sequencer of interest
165 * Return 0 on success, negative on error.
167 static int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
169 u32 arp2ctl;
170 int count = PAUSE_TRIES;
172 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
173 if (!(arp2ctl & PAUSED))
174 return 0;
176 asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
177 do {
178 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
179 if (!(arp2ctl & PAUSED))
180 return 0;
181 udelay(PAUSE_DELAY);
182 } while (--count > 0);
184 ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
185 return 0;
189 /* ---------- Downloading CSEQ/LSEQ microcode ---------- */
191 static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
192 u32 size)
194 u32 addr = CSEQ_RAM_REG_BASE_ADR;
195 const u32 *prog = (u32 *) _prog;
196 u32 i;
198 for (i = 0; i < size; i += 4, prog++, addr += 4) {
199 u32 val = asd_read_reg_dword(asd_ha, addr);
201 if (le32_to_cpu(*prog) != val) {
202 asd_printk("%s: cseq verify failed at %u "
203 "read:0x%x, wanted:0x%x\n",
204 pci_name(asd_ha->pcidev),
205 i, val, le32_to_cpu(*prog));
206 return -1;
209 ASD_DPRINTK("verified %d bytes, passed\n", size);
210 return 0;
214 * asd_verify_lseq - verify the microcode of a link sequencer
215 * @asd_ha: pointer to host adapter structure
216 * @_prog: pointer to the microcode
217 * @size: size of the microcode in bytes
218 * @lseq: link sequencer of interest
220 * The link sequencer code is accessed in 4 KB pages, which are selected
221 * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
222 * The 10 KB LSEQm instruction code is mapped, page at a time, at
223 * LmSEQRAM address.
225 static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
226 u32 size, int lseq)
228 #define LSEQ_CODEPAGE_SIZE 4096
229 int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
230 u32 page;
231 const u32 *prog = (u32 *) _prog;
233 for (page = 0; page < pages; page++) {
234 u32 i;
236 asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
237 page << LmRAMPAGE_LSHIFT);
238 for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
239 i += 4, prog++, size-=4) {
241 u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
243 if (le32_to_cpu(*prog) != val) {
244 asd_printk("%s: LSEQ%d verify failed "
245 "page:%d, offs:%d\n",
246 pci_name(asd_ha->pcidev),
247 lseq, page, i);
248 return -1;
252 ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
253 (int)((u8 *)prog-_prog));
254 return 0;
258 * asd_verify_seq -- verify CSEQ/LSEQ microcode
259 * @asd_ha: pointer to host adapter structure
260 * @prog: pointer to microcode
261 * @size: size of the microcode
262 * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
264 * Return 0 if microcode is correct, negative on mismatch.
266 static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
267 u32 size, u8 lseq_mask)
269 if (lseq_mask == 0)
270 return asd_verify_cseq(asd_ha, prog, size);
271 else {
272 int lseq, err;
274 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
275 err = asd_verify_lseq(asd_ha, prog, size, lseq);
276 if (err)
277 return err;
281 return 0;
283 #define ASD_DMA_MODE_DOWNLOAD
284 #ifdef ASD_DMA_MODE_DOWNLOAD
285 /* This is the size of the CSEQ Mapped instruction page */
286 #define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
287 static int asd_download_seq(struct asd_ha_struct *asd_ha,
288 const u8 * const prog, u32 size, u8 lseq_mask)
290 u32 comstaten;
291 u32 reg;
292 int page;
293 const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
294 struct asd_dma_tok *token;
295 int err = 0;
297 if (size % 4) {
298 asd_printk("sequencer program not multiple of 4\n");
299 return -1;
302 asd_pause_cseq(asd_ha);
303 asd_pause_lseq(asd_ha, 0xFF);
305 /* save, disable and clear interrupts */
306 comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
307 asd_write_reg_dword(asd_ha, COMSTATEN, 0);
308 asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
310 asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
311 asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
313 token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
314 if (!token) {
315 asd_printk("out of memory for dma SEQ download\n");
316 err = -ENOMEM;
317 goto out;
319 ASD_DPRINTK("dma-ing %d bytes\n", size);
321 for (page = 0; page < pages; page++) {
322 int i;
323 u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
324 (u32)MAX_DMA_OVLY_COUNT);
326 memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
327 asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
328 asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
329 reg = !page ? RESETOVLYDMA : 0;
330 reg |= (STARTOVLYDMA | OVLYHALTERR);
331 reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
332 /* Start DMA. */
333 asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
335 for (i = PAUSE_TRIES*100; i > 0; i--) {
336 u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
337 if (!(dmadone & OVLYDMAACT))
338 break;
339 udelay(PAUSE_DELAY);
343 reg = asd_read_reg_dword(asd_ha, COMSTAT);
344 if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
345 || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
346 asd_printk("%s: error DMA-ing sequencer code\n",
347 pci_name(asd_ha->pcidev));
348 err = -ENODEV;
351 asd_free_coherent(asd_ha, token);
352 out:
353 asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
355 return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
357 #else /* ASD_DMA_MODE_DOWNLOAD */
358 static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
359 u32 size, u8 lseq_mask)
361 int i;
362 u32 reg = 0;
363 const u32 *prog = (u32 *) _prog;
365 if (size % 4) {
366 asd_printk("sequencer program not multiple of 4\n");
367 return -1;
370 asd_pause_cseq(asd_ha);
371 asd_pause_lseq(asd_ha, 0xFF);
373 reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
374 reg |= PIOCMODE;
376 asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
377 asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
379 ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
380 lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
382 for (i = 0; i < size; i += 4, prog++)
383 asd_write_reg_dword(asd_ha, SPIODATA, *prog);
385 reg = (reg & ~PIOCMODE) | OVLYHALTERR;
386 asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
388 return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
390 #endif /* ASD_DMA_MODE_DOWNLOAD */
393 * asd_seq_download_seqs - download the sequencer microcode
394 * @asd_ha: pointer to host adapter structure
396 * Download the central and link sequencer microcode.
398 static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
400 int err;
402 if (!asd_ha->hw_prof.enabled_phys) {
403 asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
404 return -ENODEV;
407 /* Download the CSEQ */
408 ASD_DPRINTK("downloading CSEQ...\n");
409 err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
410 if (err) {
411 asd_printk("CSEQ download failed:%d\n", err);
412 return err;
415 /* Download the Link Sequencers code. All of the Link Sequencers
416 * microcode can be downloaded at the same time.
418 ASD_DPRINTK("downloading LSEQs...\n");
419 err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
420 asd_ha->hw_prof.enabled_phys);
421 if (err) {
422 /* Try it one at a time */
423 u8 lseq;
424 u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
426 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
427 err = asd_download_seq(asd_ha, lseq_code,
428 lseq_code_size, 1<<lseq);
429 if (err)
430 break;
433 if (err)
434 asd_printk("LSEQs download failed:%d\n", err);
436 return err;
439 /* ---------- Initializing the chip, chip memory, etc. ---------- */
442 * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
443 * @asd_ha: pointer to host adapter structure
445 static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
447 /* CSEQ Mode Independent, page 4 setup. */
448 asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
449 asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
450 asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
451 asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
452 asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
453 asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
454 asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
455 asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
456 asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
457 asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
458 asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
459 asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
460 asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
461 asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
463 u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
464 u8 val = hweight8(con);
465 asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
467 asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
469 /* CSEQ Mode independent, page 5 setup. */
470 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
471 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
472 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
473 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
474 asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
475 asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
476 asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
477 asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
478 asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
479 asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
481 /* CSEQ Mode independent, page 6 setup. */
482 asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
483 asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
484 asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
485 asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
486 asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
487 asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
488 asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
489 asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
490 asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
491 /* Calculate the free scb mask. */
493 u16 cmdctx = asd_get_cmdctx_size(asd_ha);
494 cmdctx = (~((cmdctx/128)-1)) >> 8;
495 asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
497 asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
498 first_scb_site_no);
499 asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
500 last_scb_site_no);
501 asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
502 asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
504 /* CSEQ Mode independent, page 7 setup. */
505 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
506 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
507 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
508 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
509 asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
510 asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
511 asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
512 asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
513 asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
514 asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
515 asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
516 asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
520 * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
521 * @asd_ha: pointer to host adapter structure
523 static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
525 int i;
526 int moffs;
528 moffs = CSEQ_PAGE_SIZE * 2;
530 /* CSEQ Mode dependent, modes 0-7, page 0 setup. */
531 for (i = 0; i < 8; i++) {
532 asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
533 asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
534 asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
535 asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
536 asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
539 /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
541 /* CSEQ Mode dependent, mode 8, page 0 setup. */
542 asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
543 asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
544 asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
545 asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
546 asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
547 asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
548 asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
549 asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
550 asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
551 asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
552 asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
553 asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
554 asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
555 (u16)last_scb_site_no+1);
556 asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
557 (u16)asd_ha->hw_prof.max_ddbs);
559 /* CSEQ Mode dependent, mode 8, page 1 setup. */
560 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
561 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
562 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
563 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
565 /* CSEQ Mode dependent, mode 8, page 2 setup. */
566 /* Tell the sequencer the bus address of the first SCB. */
567 asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
568 asd_ha->seq.next_scb.dma_handle);
569 ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
570 (unsigned long long)asd_ha->seq.next_scb.dma_handle);
572 /* Tell the sequencer the first Done List entry address. */
573 asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
574 asd_ha->seq.actual_dl->dma_handle);
576 /* Initialize the Q_DONE_POINTER with the least significant
577 * 4 bytes of the first Done List address. */
578 asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
579 ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
581 asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
583 /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
587 * asd_init_cseq_scratch -- setup and init CSEQ
588 * @asd_ha: pointer to host adapter structure
590 * Setup and initialize Central sequencers. Initialiaze the mode
591 * independent and dependent scratch page to the default settings.
593 static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
595 asd_init_cseq_mip(asd_ha);
596 asd_init_cseq_mdp(asd_ha);
600 * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
601 * @asd_ha: pointer to host adapter structure
603 static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
605 int i;
607 /* LSEQ Mode independent page 0 setup. */
608 asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
609 asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
610 asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
611 asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
612 ASD_NOTIFY_ENABLE_SPINUP);
613 asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
614 asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
615 asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
616 asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
617 asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
618 asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
619 asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
620 asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
621 asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
623 /* LSEQ Mode independent page 1 setup. */
624 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
625 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
626 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
627 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
628 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
629 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
630 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
631 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
632 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
633 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
634 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
635 asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
636 asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
637 asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
639 /* LSEQ Mode Independent page 2 setup. */
640 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
641 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
642 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
643 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
644 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
645 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
646 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
647 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
648 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
649 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
650 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
651 for (i = 0; i < 12; i += 4)
652 asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
654 /* LSEQ Mode Independent page 3 setup. */
656 /* Device present timer timeout */
657 asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
658 ASD_DEV_PRESENT_TIMEOUT);
660 /* SATA interlock timer disabled */
661 asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
662 ASD_SATA_INTERLOCK_TIMEOUT);
664 /* STP shutdown timer timeout constant, IGNORED by the sequencer,
665 * always 0. */
666 asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
667 ASD_STP_SHUTDOWN_TIMEOUT);
669 asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
670 ASD_SRST_ASSERT_TIMEOUT);
672 asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
673 ASD_RCV_FIS_TIMEOUT);
675 asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
676 ASD_ONE_MILLISEC_TIMEOUT);
678 /* COM_INIT timer */
679 asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
680 ASD_TEN_MILLISEC_TIMEOUT);
682 asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
683 ASD_SMP_RCV_TIMEOUT);
687 * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
688 * @asd_ha: pointer to host adapter structure
690 static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
692 int i;
693 u32 moffs;
694 u16 ret_addr[] = {
695 0xFFFF, /* mode 0 */
696 0xFFFF, /* mode 1 */
697 mode2_task, /* mode 2 */
699 0xFFFF, /* mode 4/5 */
700 0xFFFF, /* mode 4/5 */
704 * Mode 0,1,2 and 4/5 have common field on page 0 for the first
705 * 14 bytes.
707 for (i = 0; i < 3; i++) {
708 moffs = i * LSEQ_MODE_SCRATCH_SIZE;
709 asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
710 ret_addr[i]);
711 asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
712 asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
713 asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
714 asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
715 asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
716 asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
719 * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
721 asd_write_reg_word(asd_ha,
722 LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
723 ret_addr[5]);
724 asd_write_reg_word(asd_ha,
725 LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
726 asd_write_reg_word(asd_ha,
727 LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
728 asd_write_reg_word(asd_ha,
729 LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
730 asd_write_reg_word(asd_ha,
731 LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
732 asd_write_reg_byte(asd_ha,
733 LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
734 asd_write_reg_word(asd_ha,
735 LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
737 /* LSEQ Mode dependent 0, page 0 setup. */
738 asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
739 (u16)asd_ha->hw_prof.max_ddbs);
740 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
741 asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
742 asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
743 (u16)last_scb_site_no+1);
744 asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
745 (u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16));
746 asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
747 (u16) LmM0INTEN_MASK & 0xFFFF);
748 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
749 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
750 asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
751 asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
752 asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
754 /* LSEQ mode dependent, mode 1, page 0 setup. */
755 asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
756 asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
757 asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
758 asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
759 asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
760 asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
761 asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
762 asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
764 /* LSEQ Mode dependent mode 2, page 0 setup */
765 asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
766 asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
767 asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
768 asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
769 asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
770 asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
772 /* LSEQ Mode dependent, mode 4/5, page 0 setup. */
773 asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
774 asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
775 asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
776 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
777 asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
778 asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
779 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
780 asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
781 asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
783 * Set the desired interval between transmissions of the NOTIFY
784 * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
786 asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
787 ASD_NOTIFY_TIMEOUT - 1);
788 /* No delay for the first NOTIFY to be sent to the attached target. */
789 asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
790 ASD_NOTIFY_DOWN_COUNT);
791 asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(lseq),
792 ASD_NOTIFY_DOWN_COUNT);
794 /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
795 for (i = 0; i < 2; i++) {
796 int j;
797 /* Start from Page 1 of Mode 0 and 1. */
798 moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
799 /* All the fields of page 1 can be intialized to 0. */
800 for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
801 asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
804 /* LSEQ Mode dependent, mode 2, page 1 setup. */
805 asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
806 asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
807 asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
809 /* LSEQ Mode dependent, mode 4/5, page 1. */
810 for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
811 asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
812 asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
813 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
814 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
815 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
816 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
817 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
818 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
819 asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
821 /* LSEQ Mode dependent, mode 0, page 2 setup. */
822 asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
823 asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
824 asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
825 asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
826 asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
828 /* LSEQ Mode Dependent 1, page 2 setup. */
829 asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
830 asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
831 asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
832 asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
833 asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
835 /* LSEQ Mode Dependent 2, page 2 setup. */
836 /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
837 * i.e. always 0. */
838 asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
839 asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
840 asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
841 asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
842 asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
843 asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
845 /* LSEQ Mode Dependent 4/5, page 2 setup. */
846 asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
847 asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
848 asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
849 asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0);
853 * asd_init_lseq_scratch -- setup and init link sequencers
854 * @asd_ha: pointer to host adapter struct
856 static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
858 u8 lseq;
859 u8 lseq_mask;
861 lseq_mask = asd_ha->hw_prof.enabled_phys;
862 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
863 asd_init_lseq_mip(asd_ha, lseq);
864 asd_init_lseq_mdp(asd_ha, lseq);
869 * asd_init_scb_sites -- initialize sequencer SCB sites (memory).
870 * @asd_ha: pointer to host adapter structure
872 * This should be done before initializing common CSEQ and LSEQ
873 * scratch since those areas depend on some computed values here,
874 * last_scb_site_no, etc.
876 static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
878 u16 site_no;
879 u16 max_scbs = 0;
881 for (site_no = asd_ha->hw_prof.max_scbs-1;
882 site_no != (u16) -1;
883 site_no--) {
884 u16 i;
886 /* Initialize all fields in the SCB site to 0. */
887 for (i = 0; i < ASD_SCB_SIZE; i += 4)
888 asd_scbsite_write_dword(asd_ha, site_no, i, 0);
890 /* Initialize SCB Site Opcode field to invalid. */
891 asd_scbsite_write_byte(asd_ha, site_no,
892 offsetof(struct scb_header, opcode),
893 0xFF);
895 /* Initialize SCB Site Flags field to mean a response
896 * frame has been received. This means inadvertent
897 * frames received to be dropped. */
898 asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
900 /* Workaround needed by SEQ to fix a SATA issue is to exclude
901 * certain SCB sites from the free list. */
902 if (!SCB_SITE_VALID(site_no))
903 continue;
905 if (last_scb_site_no == 0)
906 last_scb_site_no = site_no;
908 /* For every SCB site, we need to initialize the
909 * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
910 * and SG Element Flag. */
912 /* Q_NEXT field of the last SCB is invalidated. */
913 asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
915 first_scb_site_no = site_no;
916 max_scbs++;
918 asd_ha->hw_prof.max_scbs = max_scbs;
919 ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
920 ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
921 ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
925 * asd_init_cseq_cio - initialize CSEQ CIO registers
926 * @asd_ha: pointer to host adapter structure
928 static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
930 int i;
932 asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
933 asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
934 asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
935 asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
936 asd_ha->seq.scbpro = 0;
937 asd_write_reg_dword(asd_ha, SCBPRO, 0);
938 asd_write_reg_dword(asd_ha, CSEQCON, 0);
940 /* Intialize CSEQ Mode 11 Interrupt Vectors.
941 * The addresses are 16 bit wide and in dword units.
942 * The values of their macros are in byte units.
943 * Thus we have to divide by 4. */
944 asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
945 asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
946 asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
948 /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
949 asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
951 /* Initialize CSEQ Scratch Page to 0x04. */
952 asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
954 /* Initialize CSEQ Mode[0-8] Dependent registers. */
955 /* Initialize Scratch Page to 0. */
956 for (i = 0; i < 9; i++)
957 asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
959 /* Reset the ARP2 Program Count. */
960 asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
962 for (i = 0; i < 8; i++) {
963 /* Intialize Mode n Link m Interrupt Enable. */
964 asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
965 /* Initialize Mode n Request Mailbox. */
966 asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
971 * asd_init_lseq_cio -- initialize LmSEQ CIO registers
972 * @asd_ha: pointer to host adapter structure
974 static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
976 u8 *sas_addr;
977 int i;
979 /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
980 asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
982 asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
984 /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
985 for (i = 0; i < 3; i++)
986 asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
988 /* Initialize Mode 5 SCRATCHPAGE to 0. */
989 asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
991 asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
992 /* Initialize Mode 0,1,2 and 5 Interrupt Enable and
993 * Interrupt registers. */
994 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
995 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
996 /* Mode 1 */
997 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
998 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
999 /* Mode 2 */
1000 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
1001 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
1002 /* Mode 5 */
1003 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
1004 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
1006 /* Enable HW Timer status. */
1007 asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
1009 /* Enable Primitive Status 0 and 1. */
1010 asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
1011 asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
1013 /* Enable Frame Error. */
1014 asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
1015 asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
1017 /* Initialize Mode 0 Transfer Level to 512. */
1018 asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
1019 /* Initialize Mode 1 Transfer Level to 256. */
1020 asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
1022 /* Initialize Program Count. */
1023 asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
1025 /* Enable Blind SG Move. */
1026 asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
1027 asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
1028 ASD_SATA_INTERLOCK_TIMEOUT);
1030 (void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
1032 /* Clear Primitive Status 0 and 1. */
1033 asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
1034 asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
1036 /* Clear HW Timer status. */
1037 asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
1039 /* Clear DMA Errors for Mode 0 and 1. */
1040 asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
1041 asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
1043 /* Clear SG DMA Errors for Mode 0 and 1. */
1044 asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
1045 asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
1047 /* Clear Mode 0 Buffer Parity Error. */
1048 asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
1050 /* Clear Mode 0 Frame Error register. */
1051 asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
1053 /* Reset LSEQ external interrupt arbiter. */
1054 asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
1056 /* Set the Phy SAS for the LmSEQ WWN. */
1057 sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
1058 for (i = 0; i < SAS_ADDR_SIZE; i++)
1059 asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
1061 /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
1062 asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
1064 /* Set the Bus Inactivity Time Limit Timer. */
1065 asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
1067 /* Enable SATA Port Multiplier. */
1068 asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
1070 /* Initialize Interrupt Vector[0-10] address in Mode 3.
1071 * See the comment on CSEQ_INT_* */
1072 asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
1073 asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
1074 asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
1075 asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
1076 asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
1077 asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
1078 asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
1079 asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
1080 asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
1081 asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
1082 asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
1084 * Program the Link LED control, applicable only for
1085 * Chip Rev. B or later.
1087 asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
1088 (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
1090 /* Set the Align Rate for SAS and STP mode. */
1091 asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
1092 asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
1097 * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
1098 * @asd_ha: pointer to host adapter struct
1100 static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
1102 int i;
1104 for (i = 0; i < 8; i++)
1105 asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
1106 for (i = 0; i < 8; i++)
1107 asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
1108 /* Reset the external interrupt arbiter. */
1109 asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
1113 * asd_init_ddb_0 -- initialize DDB 0
1114 * @asd_ha: pointer to host adapter structure
1116 * Initialize DDB site 0 which is used internally by the sequencer.
1118 static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
1120 int i;
1122 /* Zero out the DDB explicitly */
1123 for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
1124 asd_ddbsite_write_dword(asd_ha, 0, i, 0);
1126 asd_ddbsite_write_word(asd_ha, 0,
1127 offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
1128 asd_ddbsite_write_word(asd_ha, 0,
1129 offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
1130 asd_ha->hw_prof.max_ddbs-1);
1131 asd_ddbsite_write_word(asd_ha, 0,
1132 offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
1133 asd_ddbsite_write_word(asd_ha, 0,
1134 offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
1135 asd_ddbsite_write_word(asd_ha, 0,
1136 offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
1137 asd_ddbsite_write_word(asd_ha, 0,
1138 offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
1139 asd_ddbsite_write_word(asd_ha, 0,
1140 offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
1141 asd_ddbsite_write_word(asd_ha, 0,
1142 offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
1143 asd_ddbsite_write_word(asd_ha, 0,
1144 offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
1145 asd_ha->hw_prof.num_phys * 2);
1146 asd_ddbsite_write_byte(asd_ha, 0,
1147 offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
1148 asd_ddbsite_write_byte(asd_ha, 0,
1149 offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
1150 asd_ddbsite_write_byte(asd_ha, 0,
1151 offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
1152 /* DDB 0 is reserved */
1153 set_bit(0, asd_ha->hw_prof.ddb_bitmap);
1156 static void asd_seq_init_ddb_sites(struct asd_ha_struct *asd_ha)
1158 unsigned int i;
1159 unsigned int ddb_site;
1161 for (ddb_site = 0 ; ddb_site < ASD_MAX_DDBS; ddb_site++)
1162 for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
1163 asd_ddbsite_write_dword(asd_ha, ddb_site, i, 0);
1167 * asd_seq_setup_seqs -- setup and initialize central and link sequencers
1168 * @asd_ha: pointer to host adapter structure
1170 static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
1172 int lseq;
1173 u8 lseq_mask;
1175 /* Initialize DDB sites */
1176 asd_seq_init_ddb_sites(asd_ha);
1178 /* Initialize SCB sites. Done first to compute some values which
1179 * the rest of the init code depends on. */
1180 asd_init_scb_sites(asd_ha);
1182 /* Initialize CSEQ Scratch RAM registers. */
1183 asd_init_cseq_scratch(asd_ha);
1185 /* Initialize LmSEQ Scratch RAM registers. */
1186 asd_init_lseq_scratch(asd_ha);
1188 /* Initialize CSEQ CIO registers. */
1189 asd_init_cseq_cio(asd_ha);
1191 asd_init_ddb_0(asd_ha);
1193 /* Initialize LmSEQ CIO registers. */
1194 lseq_mask = asd_ha->hw_prof.enabled_phys;
1195 for_each_sequencer(lseq_mask, lseq_mask, lseq)
1196 asd_init_lseq_cio(asd_ha, lseq);
1197 asd_post_init_cseq(asd_ha);
1202 * asd_seq_start_cseq -- start the central sequencer, CSEQ
1203 * @asd_ha: pointer to host adapter structure
1205 static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
1207 /* Reset the ARP2 instruction to location zero. */
1208 asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
1210 /* Unpause the CSEQ */
1211 return asd_unpause_cseq(asd_ha);
1215 * asd_seq_start_lseq -- start a link sequencer
1216 * @asd_ha: pointer to host adapter structure
1217 * @lseq: the link sequencer of interest
1219 static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
1221 /* Reset the ARP2 instruction to location zero. */
1222 asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
1224 /* Unpause the LmSEQ */
1225 return asd_seq_unpause_lseq(asd_ha, lseq);
1228 int asd_release_firmware(void)
1230 if (sequencer_fw)
1231 release_firmware(sequencer_fw);
1232 return 0;
1235 static int asd_request_firmware(struct asd_ha_struct *asd_ha)
1237 int err, i;
1238 struct sequencer_file_header header;
1239 const struct sequencer_file_header *hdr_ptr;
1240 u32 csum = 0;
1241 u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
1243 if (sequencer_fw)
1244 /* already loaded */
1245 return 0;
1247 err = request_firmware(&sequencer_fw,
1248 SAS_RAZOR_SEQUENCER_FW_FILE,
1249 &asd_ha->pcidev->dev);
1250 if (err)
1251 return err;
1253 hdr_ptr = (const struct sequencer_file_header *)sequencer_fw->data;
1255 header.csum = le32_to_cpu(hdr_ptr->csum);
1256 header.major = le32_to_cpu(hdr_ptr->major);
1257 header.minor = le32_to_cpu(hdr_ptr->minor);
1258 header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
1259 header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
1260 header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
1261 header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
1262 header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
1263 header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
1264 header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
1265 header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
1266 header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
1267 header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
1268 header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
1270 for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
1271 csum += sequencer_fw->data[i];
1273 if (csum != header.csum) {
1274 asd_printk("Firmware file checksum mismatch\n");
1275 return -EINVAL;
1278 if (header.cseq_table_size != CSEQ_NUM_VECS ||
1279 header.lseq_table_size != LSEQ_NUM_VECS) {
1280 asd_printk("Firmware file table size mismatch\n");
1281 return -EINVAL;
1284 asd_printk("Found sequencer Firmware version %d.%d (%s)\n",
1285 header.major, header.minor, hdr_ptr->version);
1287 if (header.major != SAS_RAZOR_SEQUENCER_FW_MAJOR) {
1288 asd_printk("Firmware Major Version Mismatch;"
1289 "driver requires version %d.X",
1290 SAS_RAZOR_SEQUENCER_FW_MAJOR);
1291 return -EINVAL;
1294 ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
1295 ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
1296 mode2_task = header.mode2_task;
1297 cseq_idle_loop = header.cseq_idle_loop;
1298 lseq_idle_loop = header.lseq_idle_loop;
1300 for (i = 0; i < CSEQ_NUM_VECS; i++)
1301 cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
1303 for (i = 0; i < LSEQ_NUM_VECS; i++)
1304 lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
1306 cseq_code = &sequencer_fw->data[header.cseq_code_offset];
1307 cseq_code_size = header.cseq_code_size;
1308 lseq_code = &sequencer_fw->data[header.lseq_code_offset];
1309 lseq_code_size = header.lseq_code_size;
1311 return 0;
1314 int asd_init_seqs(struct asd_ha_struct *asd_ha)
1316 int err;
1318 err = asd_request_firmware(asd_ha);
1320 if (err) {
1321 asd_printk("Failed to load sequencer firmware file %s, error %d\n",
1322 SAS_RAZOR_SEQUENCER_FW_FILE, err);
1323 return err;
1326 err = asd_seq_download_seqs(asd_ha);
1327 if (err) {
1328 asd_printk("couldn't download sequencers for %s\n",
1329 pci_name(asd_ha->pcidev));
1330 return err;
1333 asd_seq_setup_seqs(asd_ha);
1335 return 0;
1338 int asd_start_seqs(struct asd_ha_struct *asd_ha)
1340 int err;
1341 u8 lseq_mask;
1342 int lseq;
1344 err = asd_seq_start_cseq(asd_ha);
1345 if (err) {
1346 asd_printk("couldn't start CSEQ for %s\n",
1347 pci_name(asd_ha->pcidev));
1348 return err;
1351 lseq_mask = asd_ha->hw_prof.enabled_phys;
1352 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
1353 err = asd_seq_start_lseq(asd_ha, lseq);
1354 if (err) {
1355 asd_printk("coudln't start LSEQ %d for %s\n", lseq,
1356 pci_name(asd_ha->pcidev));
1357 return err;
1361 return 0;
1365 * asd_update_port_links -- update port_map_by_links and phy_is_up
1366 * @sas_phy: pointer to the phy which has been added to a port
1368 * 1) When a link reset has completed and we got BYTES DMAED with a
1369 * valid frame we call this function for that phy, to indicate that
1370 * the phy is up, i.e. we update the phy_is_up in DDB 0. The
1371 * sequencer checks phy_is_up when pending SCBs are to be sent, and
1372 * when an open address frame has been received.
1374 * 2) When we know of ports, we call this function to update the map
1375 * of phys participaing in that port, i.e. we update the
1376 * port_map_by_links in DDB 0. When a HARD_RESET primitive has been
1377 * received, the sequencer disables all phys in that port.
1378 * port_map_by_links is also used as the conn_mask byte in the
1379 * initiator/target port DDB.
1381 void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
1383 const u8 phy_mask = (u8) phy->asd_port->phy_mask;
1384 u8 phy_is_up;
1385 u8 mask;
1386 int i, err;
1387 unsigned long flags;
1389 spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
1390 for_each_phy(phy_mask, mask, i)
1391 asd_ddbsite_write_byte(asd_ha, 0,
1392 offsetof(struct asd_ddb_seq_shared,
1393 port_map_by_links)+i,phy_mask);
1395 for (i = 0; i < 12; i++) {
1396 phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
1397 offsetof(struct asd_ddb_seq_shared, phy_is_up));
1398 err = asd_ddbsite_update_byte(asd_ha, 0,
1399 offsetof(struct asd_ddb_seq_shared, phy_is_up),
1400 phy_is_up,
1401 phy_is_up | phy_mask);
1402 if (!err)
1403 break;
1404 else if (err == -EFAULT) {
1405 asd_printk("phy_is_up: parity error in DDB 0\n");
1406 break;
1409 spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
1411 if (err)
1412 asd_printk("couldn't update DDB 0:error:%d\n", err);
1415 MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE);