drivers/acpi/acpica/dsfield.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsfield - Dispatcher field routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2008, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "amlcode.h"
  47 #include "acdispat.h"
  48 #include "acinterp.h"
  49 #include "acnamesp.h"
  50 #include "acparser.h"
  51
  52 #define _COMPONENT          ACPI_DISPATCHER
  53 ACPI_MODULE_NAME("dsfield")
  54
  55 /* Local prototypes */
  56 static acpi_status
  57 acpi_ds_get_field_names(struct acpi_create_field_info *info,
  58                         struct acpi_walk_state *walk_state,
  59                         union acpi_parse_object *arg);
  60
  61 /*******************************************************************************
  62  *
  63  * FUNCTION:    acpi_ds_create_buffer_field
  64  *
  65  * PARAMETERS:  Op                  - Current parse op (create_xXField)
  66  *              walk_state          - Current state
  67  *
  68  * RETURN:      Status
  69  *
  70  * DESCRIPTION: Execute the create_field operators:
  71  *              create_bit_field_op,
  72  *              create_byte_field_op,
  73  *              create_word_field_op,
  74  *              create_dword_field_op,
  75  *              create_qword_field_op,
  76  *              create_field_op     (all of which define a field in a buffer)
  77  *
  78  ******************************************************************************/
  79
  80 acpi_status
  81 acpi_ds_create_buffer_field(union acpi_parse_object *op,
  82                             struct acpi_walk_state *walk_state)
  83 {
  84         union acpi_parse_object *arg;
  85         struct acpi_namespace_node *node;
  86         acpi_status status;
  87         union acpi_operand_object *obj_desc;
  88         union acpi_operand_object *second_desc = NULL;
  89         u32 flags;
  90
  91         ACPI_FUNCTION_TRACE(ds_create_buffer_field);
  92
  93         /*
  94          * Get the name_string argument (name of the new buffer_field)
  95          */
  96         if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
  97
  98                 /* For create_field, name is the 4th argument */
  99
 100                 arg = acpi_ps_get_arg(op, 3);
 101         } else {
 102                 /* For all other create_xXXField operators, name is the 3rd argument */
 103
 104                 arg = acpi_ps_get_arg(op, 2);
 105         }
 106
 107         if (!arg) {
 108                 return_ACPI_STATUS(AE_AML_NO_OPERAND);
 109         }
 110
 111         if (walk_state->deferred_node) {
 112                 node = walk_state->deferred_node;
 113                 status = AE_OK;
 114         } else {
 115                 /* Execute flag should always be set when this function is entered */
 116
 117                 if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) {
 118                         return_ACPI_STATUS(AE_AML_INTERNAL);
 119                 }
 120
 121                 /* Creating new namespace node, should not already exist */
 122
 123                 flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
 124                     ACPI_NS_ERROR_IF_FOUND;
 125
 126                 /* Mark node temporary if we are executing a method */
 127
 128                 if (walk_state->method_node) {
 129                         flags |= ACPI_NS_TEMPORARY;
 130                 }
 131
 132                 /* Enter the name_string into the namespace */
 133
 134                 status =
 135                     acpi_ns_lookup(walk_state->scope_info,
 136                                    arg->common.value.string, ACPI_TYPE_ANY,
 137                                    ACPI_IMODE_LOAD_PASS1, flags, walk_state,
 138                                    &node);
 139                 if (ACPI_FAILURE(status)) {
 140                         ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 141                         return_ACPI_STATUS(status);
 142                 }
 143         }
 144
 145         /*
 146          * We could put the returned object (Node) on the object stack for later,
 147          * but for now, we will put it in the "op" object that the parser uses,
 148          * so we can get it again at the end of this scope.
 149          */
 150         op->common.node = node;
 151
 152         /*
 153          * If there is no object attached to the node, this node was just created
 154          * and we need to create the field object. Otherwise, this was a lookup
 155          * of an existing node and we don't want to create the field object again.
 156          */
 157         obj_desc = acpi_ns_get_attached_object(node);
 158         if (obj_desc) {
 159                 return_ACPI_STATUS(AE_OK);
 160         }
 161
 162         /*
 163          * The Field definition is not fully parsed at this time.
 164          * (We must save the address of the AML for the buffer and index operands)
 165          */
 166
 167         /* Create the buffer field object */
 168
 169         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER_FIELD);
 170         if (!obj_desc) {
 171                 status = AE_NO_MEMORY;
 172                 goto cleanup;
 173         }
 174
 175         /*
 176          * Remember location in AML stream of the field unit opcode and operands --
 177          * since the buffer and index operands must be evaluated.
 178          */
 179         second_desc = obj_desc->common.next_object;
 180         second_desc->extra.aml_start = op->named.data;
 181         second_desc->extra.aml_length = op->named.length;
 182         obj_desc->buffer_field.node = node;
 183
 184         /* Attach constructed field descriptors to parent node */
 185
 186         status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_BUFFER_FIELD);
 187         if (ACPI_FAILURE(status)) {
 188                 goto cleanup;
 189         }
 190
 191       cleanup:
 192
 193         /* Remove local reference to the object */
 194
 195         acpi_ut_remove_reference(obj_desc);
 196         return_ACPI_STATUS(status);
 197 }
 198
 199 /*******************************************************************************
 200  *
 201  * FUNCTION:    acpi_ds_get_field_names
 202  *
 203  * PARAMETERS:  Info            - create_field info structure
 204  *  `           walk_state      - Current method state
 205  *              Arg             - First parser arg for the field name list
 206  *
 207  * RETURN:      Status
 208  *
 209  * DESCRIPTION: Process all named fields in a field declaration.  Names are
 210  *              entered into the namespace.
 211  *
 212  ******************************************************************************/
 213
 214 static acpi_status
 215 acpi_ds_get_field_names(struct acpi_create_field_info *info,
 216                         struct acpi_walk_state *walk_state,
 217                         union acpi_parse_object *arg)
 218 {
 219         acpi_status status;
 220         acpi_integer position;
 221
 222         ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info);
 223
 224         /* First field starts at bit zero */
 225
 226         info->field_bit_position = 0;
 227
 228         /* Process all elements in the field list (of parse nodes) */
 229
 230         while (arg) {
 231                 /*
 232                  * Three types of field elements are handled:
 233                  * 1) Offset - specifies a bit offset
 234                  * 2) access_as - changes the access mode
 235                  * 3) Name - Enters a new named field into the namespace
 236                  */
 237                 switch (arg->common.aml_opcode) {
 238                 case AML_INT_RESERVEDFIELD_OP:
 239
 240                         position = (acpi_integer) info->field_bit_position
 241                             + (acpi_integer) arg->common.value.size;
 242
 243                         if (position > ACPI_UINT32_MAX) {
 244                                 ACPI_ERROR((AE_INFO,
 245                                             "Bit offset within field too large (> 0xFFFFFFFF)"));
 246                                 return_ACPI_STATUS(AE_SUPPORT);
 247                         }
 248
 249                         info->field_bit_position = (u32) position;
 250                         break;
 251
 252                 case AML_INT_ACCESSFIELD_OP:
 253
 254                         /*
 255                          * Get a new access_type and access_attribute -- to be used for all
 256                          * field units that follow, until field end or another access_as
 257                          * keyword.
 258                          *
 259                          * In field_flags, preserve the flag bits other than the
 260                          * ACCESS_TYPE bits
 261                          */
 262                         info->field_flags = (u8)
 263                             ((info->
 264                               field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) |
 265                              ((u8) ((u32) arg->common.value.integer >> 8)));
 266
 267                         info->attribute = (u8) (arg->common.value.integer);
 268                         break;
 269
 270                 case AML_INT_NAMEDFIELD_OP:
 271
 272                         /* Lookup the name, it should already exist */
 273
 274                         status = acpi_ns_lookup(walk_state->scope_info,
 275                                                 (char *)&arg->named.name,
 276                                                 info->field_type,
 277                                                 ACPI_IMODE_EXECUTE,
 278                                                 ACPI_NS_DONT_OPEN_SCOPE,
 279                                                 walk_state, &info->field_node);
 280                         if (ACPI_FAILURE(status)) {
 281                                 ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
 282                                                      status);
 283                                 return_ACPI_STATUS(status);
 284                         } else {
 285                                 arg->common.node = info->field_node;
 286                                 info->field_bit_length = arg->common.value.size;
 287
 288                                 /*
 289                                  * If there is no object attached to the node, this node was
 290                                  * just created and we need to create the field object.
 291                                  * Otherwise, this was a lookup of an existing node and we
 292                                  * don't want to create the field object again.
 293                                  */
 294                                 if (!acpi_ns_get_attached_object
 295                                     (info->field_node)) {
 296                                         status = acpi_ex_prep_field_value(info);
 297                                         if (ACPI_FAILURE(status)) {
 298                                                 return_ACPI_STATUS(status);
 299                                         }
 300                                 }
 301                         }
 302
 303                         /* Keep track of bit position for the next field */
 304
 305                         position = (acpi_integer) info->field_bit_position
 306                             + (acpi_integer) arg->common.value.size;
 307
 308                         if (position > ACPI_UINT32_MAX) {
 309                                 ACPI_ERROR((AE_INFO,
 310                                             "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
 311                                             ACPI_CAST_PTR(char,
 312                                                           &info->field_node->
 313                                                           name)));
 314                                 return_ACPI_STATUS(AE_SUPPORT);
 315                         }
 316
 317                         info->field_bit_position += info->field_bit_length;
 318                         break;
 319
 320                 default:
 321
 322                         ACPI_ERROR((AE_INFO,
 323                                     "Invalid opcode in field list: %X",
 324                                     arg->common.aml_opcode));
 325                         return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 326                 }
 327
 328                 arg = arg->common.next;
 329         }
 330
 331         return_ACPI_STATUS(AE_OK);
 332 }
 333
 334 /*******************************************************************************
 335  *
 336  * FUNCTION:    acpi_ds_create_field
 337  *
 338  * PARAMETERS:  Op              - Op containing the Field definition and args
 339  *              region_node     - Object for the containing Operation Region
 340  *  `           walk_state      - Current method state
 341  *
 342  * RETURN:      Status
 343  *
 344  * DESCRIPTION: Create a new field in the specified operation region
 345  *
 346  ******************************************************************************/
 347
 348 acpi_status
 349 acpi_ds_create_field(union acpi_parse_object *op,
 350                      struct acpi_namespace_node *region_node,
 351                      struct acpi_walk_state *walk_state)
 352 {
 353         acpi_status status;
 354         union acpi_parse_object *arg;
 355         struct acpi_create_field_info info;
 356
 357         ACPI_FUNCTION_TRACE_PTR(ds_create_field, op);
 358
 359         /* First arg is the name of the parent op_region (must already exist) */
 360
 361         arg = op->common.value.arg;
 362         if (!region_node) {
 363                 status =
 364                     acpi_ns_lookup(walk_state->scope_info,
 365                                    arg->common.value.name, ACPI_TYPE_REGION,
 366                                    ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 367                                    walk_state, &region_node);
 368                 if (ACPI_FAILURE(status)) {
 369                         ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
 370                         return_ACPI_STATUS(status);
 371                 }
 372         }
 373
 374         /* Second arg is the field flags */
 375
 376         arg = arg->common.next;
 377         info.field_flags = (u8) arg->common.value.integer;
 378         info.attribute = 0;
 379
 380         /* Each remaining arg is a Named Field */
 381
 382         info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD;
 383         info.region_node = region_node;
 384
 385         status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
 386
 387         return_ACPI_STATUS(status);
 388 }
 389
 390 /*******************************************************************************
 391  *
 392  * FUNCTION:    acpi_ds_init_field_objects
 393  *
 394  * PARAMETERS:  Op              - Op containing the Field definition and args
 395  *  `           walk_state      - Current method state
 396  *
 397  * RETURN:      Status
 398  *
 399  * DESCRIPTION: For each "Field Unit" name in the argument list that is
 400  *              part of the field declaration, enter the name into the
 401  *              namespace.
 402  *
 403  ******************************************************************************/
 404
 405 acpi_status
 406 acpi_ds_init_field_objects(union acpi_parse_object *op,
 407                            struct acpi_walk_state *walk_state)
 408 {
 409         acpi_status status;
 410         union acpi_parse_object *arg = NULL;
 411         struct acpi_namespace_node *node;
 412         u8 type = 0;
 413         u32 flags;
 414
 415         ACPI_FUNCTION_TRACE_PTR(ds_init_field_objects, op);
 416
 417         /* Execute flag should always be set when this function is entered */
 418
 419         if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) {
 420                 if (walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP) {
 421
 422                         /* bank_field Op is deferred, just return OK */
 423
 424                         return_ACPI_STATUS(AE_OK);
 425                 }
 426
 427                 return_ACPI_STATUS(AE_AML_INTERNAL);
 428         }
 429
 430         /*
 431          * Get the field_list argument for this opcode. This is the start of the
 432          * list of field elements.
 433          */
 434         switch (walk_state->opcode) {
 435         case AML_FIELD_OP:
 436                 arg = acpi_ps_get_arg(op, 2);
 437                 type = ACPI_TYPE_LOCAL_REGION_FIELD;
 438                 break;
 439
 440         case AML_BANK_FIELD_OP:
 441                 arg = acpi_ps_get_arg(op, 4);
 442                 type = ACPI_TYPE_LOCAL_BANK_FIELD;
 443                 break;
 444
 445         case AML_INDEX_FIELD_OP:
 446                 arg = acpi_ps_get_arg(op, 3);
 447                 type = ACPI_TYPE_LOCAL_INDEX_FIELD;
 448                 break;
 449
 450         default:
 451                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 452         }
 453
 454         /* Creating new namespace node(s), should not already exist */
 455
 456         flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
 457             ACPI_NS_ERROR_IF_FOUND;
 458
 459         /* Mark node(s) temporary if we are executing a method */
 460
 461         if (walk_state->method_node) {
 462                 flags |= ACPI_NS_TEMPORARY;
 463         }
 464
 465         /*
 466          * Walk the list of entries in the field_list
 467          * Note: field_list can be of zero length. In this case, Arg will be NULL.
 468          */
 469         while (arg) {
 470                 /*
 471                  * Ignore OFFSET and ACCESSAS terms here; we are only interested in the
 472                  * field names in order to enter them into the namespace.
 473                  */
 474                 if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
 475                         status = acpi_ns_lookup(walk_state->scope_info,
 476                                                 (char *)&arg->named.name, type,
 477                                                 ACPI_IMODE_LOAD_PASS1, flags,
 478                                                 walk_state, &node);
 479                         if (ACPI_FAILURE(status)) {
 480                                 ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
 481                                                      status);
 482                                 if (status != AE_ALREADY_EXISTS) {
 483                                         return_ACPI_STATUS(status);
 484                                 }
 485
 486                                 /* Name already exists, just ignore this error */
 487
 488                                 status = AE_OK;
 489                         }
 490
 491                         arg->common.node = node;
 492                 }
 493
 494                 /* Get the next field element in the list */
 495
 496                 arg = arg->common.next;
 497         }
 498
 499         return_ACPI_STATUS(AE_OK);
 500 }
 501
 502 /*******************************************************************************
 503  *
 504  * FUNCTION:    acpi_ds_create_bank_field
 505  *
 506  * PARAMETERS:  Op              - Op containing the Field definition and args
 507  *              region_node     - Object for the containing Operation Region
 508  *              walk_state      - Current method state
 509  *
 510  * RETURN:      Status
 511  *
 512  * DESCRIPTION: Create a new bank field in the specified operation region
 513  *
 514  ******************************************************************************/
 515
 516 acpi_status
 517 acpi_ds_create_bank_field(union acpi_parse_object *op,
 518                           struct acpi_namespace_node *region_node,
 519                           struct acpi_walk_state *walk_state)
 520 {
 521         acpi_status status;
 522         union acpi_parse_object *arg;
 523         struct acpi_create_field_info info;
 524
 525         ACPI_FUNCTION_TRACE_PTR(ds_create_bank_field, op);
 526
 527         /* First arg is the name of the parent op_region (must already exist) */
 528
 529         arg = op->common.value.arg;
 530         if (!region_node) {
 531                 status =
 532                     acpi_ns_lookup(walk_state->scope_info,
 533                                    arg->common.value.name, ACPI_TYPE_REGION,
 534                                    ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 535                                    walk_state, &region_node);
 536                 if (ACPI_FAILURE(status)) {
 537                         ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
 538                         return_ACPI_STATUS(status);
 539                 }
 540         }
 541
 542         /* Second arg is the Bank Register (Field) (must already exist) */
 543
 544         arg = arg->common.next;
 545         status =
 546             acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
 547                            ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 548                            ACPI_NS_SEARCH_PARENT, walk_state,
 549                            &info.register_node);
 550         if (ACPI_FAILURE(status)) {
 551                 ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 552                 return_ACPI_STATUS(status);
 553         }
 554
 555         /*
 556          * Third arg is the bank_value
 557          * This arg is a term_arg, not a constant
 558          * It will be evaluated later, by acpi_ds_eval_bank_field_operands
 559          */
 560         arg = arg->common.next;
 561
 562         /* Fourth arg is the field flags */
 563
 564         arg = arg->common.next;
 565         info.field_flags = (u8) arg->common.value.integer;
 566
 567         /* Each remaining arg is a Named Field */
 568
 569         info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD;
 570         info.region_node = region_node;
 571
 572         /*
 573          * Use Info.data_register_node to store bank_field Op
 574          * It's safe because data_register_node will never be used when create bank field
 575          * We store aml_start and aml_length in the bank_field Op for late evaluation
 576          * Used in acpi_ex_prep_field_value(Info)
 577          *
 578          * TBD: Or, should we add a field in struct acpi_create_field_info, like "void *ParentOp"?
 579          */
 580         info.data_register_node = (struct acpi_namespace_node *)op;
 581
 582         status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
 583         return_ACPI_STATUS(status);
 584 }
 585
 586 /*******************************************************************************
 587  *
 588  * FUNCTION:    acpi_ds_create_index_field
 589  *
 590  * PARAMETERS:  Op              - Op containing the Field definition and args
 591  *              region_node     - Object for the containing Operation Region
 592  *  `           walk_state      - Current method state
 593  *
 594  * RETURN:      Status
 595  *
 596  * DESCRIPTION: Create a new index field in the specified operation region
 597  *
 598  ******************************************************************************/
 599
 600 acpi_status
 601 acpi_ds_create_index_field(union acpi_parse_object *op,
 602                            struct acpi_namespace_node *region_node,
 603                            struct acpi_walk_state *walk_state)
 604 {
 605         acpi_status status;
 606         union acpi_parse_object *arg;
 607         struct acpi_create_field_info info;
 608
 609         ACPI_FUNCTION_TRACE_PTR(ds_create_index_field, op);
 610
 611         /* First arg is the name of the Index register (must already exist) */
 612
 613         arg = op->common.value.arg;
 614         status =
 615             acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
 616                            ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 617                            ACPI_NS_SEARCH_PARENT, walk_state,
 618                            &info.register_node);
 619         if (ACPI_FAILURE(status)) {
 620                 ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 621                 return_ACPI_STATUS(status);
 622         }
 623
 624         /* Second arg is the data register (must already exist) */
 625
 626         arg = arg->common.next;
 627         status =
 628             acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
 629                            ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 630                            ACPI_NS_SEARCH_PARENT, walk_state,
 631                            &info.data_register_node);
 632         if (ACPI_FAILURE(status)) {
 633                 ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 634                 return_ACPI_STATUS(status);
 635         }
 636
 637         /* Next arg is the field flags */
 638
 639         arg = arg->common.next;
 640         info.field_flags = (u8) arg->common.value.integer;
 641
 642         /* Each remaining arg is a Named Field */
 643
 644         info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD;
 645         info.region_node = region_node;
 646
 647         status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
 648
 649         return_ACPI_STATUS(status);
 650 }