arch/arm/mach-omap1/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <asm/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <asm/arch/gpio.h>
  26 #include <asm/arch/mux.h>
  27 #include <asm/arch/usb.h>
  28 #include <asm/arch/board.h>
  29 #include <asm/arch/common.h>
  30
  31 static void __init omap_generic_init_irq(void)
  32 {
  33         omap1_init_common_hw();
  34         omap_init_irq();
  35 }
  36
  37 /* assume no Mini-AB port */
  38
  39 #ifdef CONFIG_ARCH_OMAP15XX
  40 static struct omap_usb_config generic1510_usb_config __initdata = {
  41         .register_host  = 1,
  42         .register_dev   = 1,
  43         .hmc_mode       = 16,
  44         .pins[0]        = 3,
  45 };
  46 #endif
  47
  48 #if defined(CONFIG_ARCH_OMAP16XX)
  49 static struct omap_usb_config generic1610_usb_config __initdata = {
  50 #ifdef CONFIG_USB_OTG
  51         .otg            = 1,
  52 #endif
  53         .register_host  = 1,
  54         .register_dev   = 1,
  55         .hmc_mode       = 16,
  56         .pins[0]        = 6,
  57 };
  58
  59 static struct omap_mmc_config generic_mmc_config __initdata = {
  60         .mmc [0] = {
  61                 .enabled        = 0,
  62                 .wire4          = 0,
  63                 .wp_pin         = -1,
  64                 .power_pin      = -1,
  65                 .switch_pin     = -1,
  66         },
  67         .mmc [1] = {
  68                 .enabled        = 0,
  69                 .wire4          = 0,
  70                 .wp_pin         = -1,
  71                 .power_pin      = -1,
  72                 .switch_pin     = -1,
  73         },
  74 };
  75
  76 #endif
  77
  78 static struct omap_uart_config generic_uart_config __initdata = {
  79         .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
  80 };
  81
  82 static struct omap_board_config_kernel generic_config[] = {
  83         { OMAP_TAG_USB,           NULL },
  84         { OMAP_TAG_MMC,           &generic_mmc_config },
  85         { OMAP_TAG_UART,        &generic_uart_config },
  86 };
  87
  88 static void __init omap_generic_init(void)
  89 {
  90 #ifdef CONFIG_ARCH_OMAP15XX
  91         if (cpu_is_omap15xx()) {
  92                 generic_config[0].data = &generic1510_usb_config;
  93         }
  94 #endif
  95 #if defined(CONFIG_ARCH_OMAP16XX)
  96         if (!cpu_is_omap1510()) {
  97                 generic_config[0].data = &generic1610_usb_config;
  98         }
  99 #endif
 100
 101         omap_board_config = generic_config;
 102         omap_board_config_size = ARRAY_SIZE(generic_config);
 103         omap_serial_init();
 104 }
 105
 106 static void __init omap_generic_map_io(void)
 107 {
 108         omap1_map_common_io();
 109 }
 110
 111 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 112         /* Maintainer: Tony Lindgren <tony@atomide.com> */
 113         .phys_io        = 0xfff00000,
 114         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 115         .boot_params    = 0x10000100,
 116         .map_io         = omap_generic_map_io,
 117         .init_irq       = omap_generic_init_irq,
 118         .init_machine   = omap_generic_init,
 119         .timer          = &omap_timer,
 120 MACHINE_END