2 * Network device driver for the MACE ethernet controller on
3 * Apple Powermacs. Assumes it's under a DBDMA controller.
5 * Copyright (C) 1996 Paul Mackerras.
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/netdevice.h>
11 #include <linux/etherdevice.h>
12 #include <linux/delay.h>
13 #include <linux/string.h>
14 #include <linux/timer.h>
15 #include <linux/init.h>
16 #include <linux/crc32.h>
17 #include <linux/spinlock.h>
18 #include <linux/bitrev.h>
20 #include <asm/dbdma.h>
22 #include <asm/pgtable.h>
23 #include <asm/macio.h>
27 static int port_aaui
= -1;
31 #define MAX_TX_ACTIVE 1
32 #define NCMDS_TX 1 /* dma commands per element in tx ring */
33 #define RX_BUFLEN (ETH_FRAME_LEN + 8)
34 #define TX_TIMEOUT HZ /* 1 second */
36 /* Chip rev needs workaround on HW & multicast addr change */
37 #define BROKEN_ADDRCHG_REV 0x0941
39 /* Bits in transmit DMA status */
40 #define TX_DMA_ERR 0x80
43 volatile struct mace __iomem
*mace
;
44 volatile struct dbdma_regs __iomem
*tx_dma
;
46 volatile struct dbdma_regs __iomem
*rx_dma
;
48 volatile struct dbdma_cmd
*tx_cmds
; /* xmit dma command list */
49 volatile struct dbdma_cmd
*rx_cmds
; /* recv dma command list */
50 struct sk_buff
*rx_bufs
[N_RX_RING
];
53 struct sk_buff
*tx_bufs
[N_TX_RING
];
57 unsigned char tx_fullup
;
58 unsigned char tx_active
;
59 unsigned char tx_bad_runt
;
60 struct timer_list tx_timeout
;
64 struct macio_dev
*mdev
;
69 * Number of bytes of private data per MACE: allow enough for
70 * the rx and tx dma commands plus a branch dma command each,
71 * and another 16 bytes to allow us to align the dma command
72 * buffers on a 16 byte boundary.
74 #define PRIV_BYTES (sizeof(struct mace_data) \
75 + (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
77 static int mace_open(struct net_device
*dev
);
78 static int mace_close(struct net_device
*dev
);
79 static int mace_xmit_start(struct sk_buff
*skb
, struct net_device
*dev
);
80 static void mace_set_multicast(struct net_device
*dev
);
81 static void mace_reset(struct net_device
*dev
);
82 static int mace_set_address(struct net_device
*dev
, void *addr
);
83 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
);
84 static irqreturn_t
mace_txdma_intr(int irq
, void *dev_id
);
85 static irqreturn_t
mace_rxdma_intr(int irq
, void *dev_id
);
86 static void mace_set_timeout(struct net_device
*dev
);
87 static void mace_tx_timeout(unsigned long data
);
88 static inline void dbdma_reset(volatile struct dbdma_regs __iomem
*dma
);
89 static inline void mace_clean_rings(struct mace_data
*mp
);
90 static void __mace_set_address(struct net_device
*dev
, void *addr
);
93 * If we can't get a skbuff when we need it, we use this area for DMA.
95 static unsigned char *dummy_buf
;
97 static const struct net_device_ops mace_netdev_ops
= {
98 .ndo_open
= mace_open
,
99 .ndo_stop
= mace_close
,
100 .ndo_start_xmit
= mace_xmit_start
,
101 .ndo_set_multicast_list
= mace_set_multicast
,
102 .ndo_set_mac_address
= mace_set_address
,
103 .ndo_change_mtu
= eth_change_mtu
,
104 .ndo_validate_addr
= eth_validate_addr
,
107 static int __devinit
mace_probe(struct macio_dev
*mdev
, const struct of_device_id
*match
)
109 struct device_node
*mace
= macio_get_of_node(mdev
);
110 struct net_device
*dev
;
111 struct mace_data
*mp
;
112 const unsigned char *addr
;
113 int j
, rev
, rc
= -EBUSY
;
115 if (macio_resource_count(mdev
) != 3 || macio_irq_count(mdev
) != 3) {
116 printk(KERN_ERR
"can't use MACE %s: need 3 addrs and 3 irqs\n",
121 addr
= of_get_property(mace
, "mac-address", NULL
);
123 addr
= of_get_property(mace
, "local-mac-address", NULL
);
125 printk(KERN_ERR
"Can't get mac-address for MACE %s\n",
132 * lazy allocate the driver-wide dummy buffer. (Note that we
133 * never have more than one MACE in the system anyway)
135 if (dummy_buf
== NULL
) {
136 dummy_buf
= kmalloc(RX_BUFLEN
+2, GFP_KERNEL
);
137 if (dummy_buf
== NULL
) {
138 printk(KERN_ERR
"MACE: couldn't allocate dummy buffer\n");
143 if (macio_request_resources(mdev
, "mace")) {
144 printk(KERN_ERR
"MACE: can't request IO resources !\n");
148 dev
= alloc_etherdev(PRIV_BYTES
);
150 printk(KERN_ERR
"MACE: can't allocate ethernet device !\n");
154 SET_NETDEV_DEV(dev
, &mdev
->ofdev
.dev
);
156 mp
= netdev_priv(dev
);
158 macio_set_drvdata(mdev
, dev
);
160 dev
->base_addr
= macio_resource_start(mdev
, 0);
161 mp
->mace
= ioremap(dev
->base_addr
, 0x1000);
162 if (mp
->mace
== NULL
) {
163 printk(KERN_ERR
"MACE: can't map IO resources !\n");
167 dev
->irq
= macio_irq(mdev
, 0);
169 rev
= addr
[0] == 0 && addr
[1] == 0xA0;
170 for (j
= 0; j
< 6; ++j
) {
171 dev
->dev_addr
[j
] = rev
? bitrev8(addr
[j
]): addr
[j
];
173 mp
->chipid
= (in_8(&mp
->mace
->chipid_hi
) << 8) |
174 in_8(&mp
->mace
->chipid_lo
);
177 mp
= netdev_priv(dev
);
178 mp
->maccc
= ENXMT
| ENRCV
;
180 mp
->tx_dma
= ioremap(macio_resource_start(mdev
, 1), 0x1000);
181 if (mp
->tx_dma
== NULL
) {
182 printk(KERN_ERR
"MACE: can't map TX DMA resources !\n");
186 mp
->tx_dma_intr
= macio_irq(mdev
, 1);
188 mp
->rx_dma
= ioremap(macio_resource_start(mdev
, 2), 0x1000);
189 if (mp
->rx_dma
== NULL
) {
190 printk(KERN_ERR
"MACE: can't map RX DMA resources !\n");
192 goto err_unmap_tx_dma
;
194 mp
->rx_dma_intr
= macio_irq(mdev
, 2);
196 mp
->tx_cmds
= (volatile struct dbdma_cmd
*) DBDMA_ALIGN(mp
+ 1);
197 mp
->rx_cmds
= mp
->tx_cmds
+ NCMDS_TX
* N_TX_RING
+ 1;
199 memset((char *) mp
->tx_cmds
, 0,
200 (NCMDS_TX
*N_TX_RING
+ N_RX_RING
+ 2) * sizeof(struct dbdma_cmd
));
201 init_timer(&mp
->tx_timeout
);
202 spin_lock_init(&mp
->lock
);
203 mp
->timeout_active
= 0;
206 mp
->port_aaui
= port_aaui
;
208 /* Apple Network Server uses the AAUI port */
209 if (machine_is_compatible("AAPL,ShinerESB"))
212 #ifdef CONFIG_MACE_AAUI_PORT
220 dev
->netdev_ops
= &mace_netdev_ops
;
223 * Most of what is below could be moved to mace_open()
227 rc
= request_irq(dev
->irq
, mace_interrupt
, 0, "MACE", dev
);
229 printk(KERN_ERR
"MACE: can't get irq %d\n", dev
->irq
);
230 goto err_unmap_rx_dma
;
232 rc
= request_irq(mp
->tx_dma_intr
, mace_txdma_intr
, 0, "MACE-txdma", dev
);
234 printk(KERN_ERR
"MACE: can't get irq %d\n", mp
->tx_dma_intr
);
237 rc
= request_irq(mp
->rx_dma_intr
, mace_rxdma_intr
, 0, "MACE-rxdma", dev
);
239 printk(KERN_ERR
"MACE: can't get irq %d\n", mp
->rx_dma_intr
);
240 goto err_free_tx_irq
;
243 rc
= register_netdev(dev
);
245 printk(KERN_ERR
"MACE: Cannot register net device, aborting.\n");
246 goto err_free_rx_irq
;
249 printk(KERN_INFO
"%s: MACE at %pM, chip revision %d.%d\n",
250 dev
->name
, dev
->dev_addr
,
251 mp
->chipid
>> 8, mp
->chipid
& 0xff);
256 free_irq(macio_irq(mdev
, 2), dev
);
258 free_irq(macio_irq(mdev
, 1), dev
);
260 free_irq(macio_irq(mdev
, 0), dev
);
270 macio_release_resources(mdev
);
275 static int __devexit
mace_remove(struct macio_dev
*mdev
)
277 struct net_device
*dev
= macio_get_drvdata(mdev
);
278 struct mace_data
*mp
;
282 macio_set_drvdata(mdev
, NULL
);
284 mp
= netdev_priv(dev
);
286 unregister_netdev(dev
);
288 free_irq(dev
->irq
, dev
);
289 free_irq(mp
->tx_dma_intr
, dev
);
290 free_irq(mp
->rx_dma_intr
, dev
);
298 macio_release_resources(mdev
);
303 static void dbdma_reset(volatile struct dbdma_regs __iomem
*dma
)
307 out_le32(&dma
->control
, (WAKE
|FLUSH
|PAUSE
|RUN
) << 16);
310 * Yes this looks peculiar, but apparently it needs to be this
311 * way on some machines.
313 for (i
= 200; i
> 0; --i
)
314 if (ld_le32(&dma
->control
) & RUN
)
318 static void mace_reset(struct net_device
*dev
)
320 struct mace_data
*mp
= netdev_priv(dev
);
321 volatile struct mace __iomem
*mb
= mp
->mace
;
324 /* soft-reset the chip */
327 out_8(&mb
->biucc
, SWRST
);
328 if (in_8(&mb
->biucc
) & SWRST
) {
335 printk(KERN_ERR
"mace: cannot reset chip!\n");
339 out_8(&mb
->imr
, 0xff); /* disable all intrs for now */
341 out_8(&mb
->maccc
, 0); /* turn off tx, rx */
343 out_8(&mb
->biucc
, XMTSP_64
);
344 out_8(&mb
->utr
, RTRD
);
345 out_8(&mb
->fifocc
, RCVFW_32
| XMTFW_16
| XMTFWU
| RCVFWU
| XMTBRST
);
346 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
); /* auto-pad short frames */
347 out_8(&mb
->rcvfc
, 0);
349 /* load up the hardware address */
350 __mace_set_address(dev
, dev
->dev_addr
);
352 /* clear the multicast filter */
353 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
354 out_8(&mb
->iac
, LOGADDR
);
356 out_8(&mb
->iac
, ADDRCHG
| LOGADDR
);
357 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
360 for (i
= 0; i
< 8; ++i
)
361 out_8(&mb
->ladrf
, 0);
363 /* done changing address */
364 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
368 out_8(&mb
->plscc
, PORTSEL_AUI
+ ENPLSIO
);
370 out_8(&mb
->plscc
, PORTSEL_GPSI
+ ENPLSIO
);
373 static void __mace_set_address(struct net_device
*dev
, void *addr
)
375 struct mace_data
*mp
= netdev_priv(dev
);
376 volatile struct mace __iomem
*mb
= mp
->mace
;
377 unsigned char *p
= addr
;
380 /* load up the hardware address */
381 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
382 out_8(&mb
->iac
, PHYADDR
);
384 out_8(&mb
->iac
, ADDRCHG
| PHYADDR
);
385 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
388 for (i
= 0; i
< 6; ++i
)
389 out_8(&mb
->padr
, dev
->dev_addr
[i
] = p
[i
]);
390 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
394 static int mace_set_address(struct net_device
*dev
, void *addr
)
396 struct mace_data
*mp
= netdev_priv(dev
);
397 volatile struct mace __iomem
*mb
= mp
->mace
;
400 spin_lock_irqsave(&mp
->lock
, flags
);
402 __mace_set_address(dev
, addr
);
404 /* note: setting ADDRCHG clears ENRCV */
405 out_8(&mb
->maccc
, mp
->maccc
);
407 spin_unlock_irqrestore(&mp
->lock
, flags
);
411 static inline void mace_clean_rings(struct mace_data
*mp
)
415 /* free some skb's */
416 for (i
= 0; i
< N_RX_RING
; ++i
) {
417 if (mp
->rx_bufs
[i
] != NULL
) {
418 dev_kfree_skb(mp
->rx_bufs
[i
]);
419 mp
->rx_bufs
[i
] = NULL
;
422 for (i
= mp
->tx_empty
; i
!= mp
->tx_fill
; ) {
423 dev_kfree_skb(mp
->tx_bufs
[i
]);
424 if (++i
>= N_TX_RING
)
429 static int mace_open(struct net_device
*dev
)
431 struct mace_data
*mp
= netdev_priv(dev
);
432 volatile struct mace __iomem
*mb
= mp
->mace
;
433 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
434 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
435 volatile struct dbdma_cmd
*cp
;
443 /* initialize list of sk_buffs for receiving and set up recv dma */
444 mace_clean_rings(mp
);
445 memset((char *)mp
->rx_cmds
, 0, N_RX_RING
* sizeof(struct dbdma_cmd
));
447 for (i
= 0; i
< N_RX_RING
- 1; ++i
) {
448 skb
= dev_alloc_skb(RX_BUFLEN
+ 2);
452 skb_reserve(skb
, 2); /* so IP header lands on 4-byte bdry */
455 mp
->rx_bufs
[i
] = skb
;
456 st_le16(&cp
->req_count
, RX_BUFLEN
);
457 st_le16(&cp
->command
, INPUT_LAST
+ INTR_ALWAYS
);
458 st_le32(&cp
->phy_addr
, virt_to_bus(data
));
462 mp
->rx_bufs
[i
] = NULL
;
463 st_le16(&cp
->command
, DBDMA_STOP
);
467 /* Put a branch back to the beginning of the receive command list */
469 st_le16(&cp
->command
, DBDMA_NOP
+ BR_ALWAYS
);
470 st_le32(&cp
->cmd_dep
, virt_to_bus(mp
->rx_cmds
));
473 out_le32(&rd
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
474 out_le32(&rd
->cmdptr
, virt_to_bus(mp
->rx_cmds
));
475 out_le32(&rd
->control
, (RUN
<< 16) | RUN
);
477 /* put a branch at the end of the tx command list */
478 cp
= mp
->tx_cmds
+ NCMDS_TX
* N_TX_RING
;
479 st_le16(&cp
->command
, DBDMA_NOP
+ BR_ALWAYS
);
480 st_le32(&cp
->cmd_dep
, virt_to_bus(mp
->tx_cmds
));
483 out_le32(&td
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16);
484 out_le32(&td
->cmdptr
, virt_to_bus(mp
->tx_cmds
));
492 out_8(&mb
->maccc
, mp
->maccc
);
493 /* enable all interrupts except receive interrupts */
494 out_8(&mb
->imr
, RCVINT
);
499 static int mace_close(struct net_device
*dev
)
501 struct mace_data
*mp
= netdev_priv(dev
);
502 volatile struct mace __iomem
*mb
= mp
->mace
;
503 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
504 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
506 /* disable rx and tx */
507 out_8(&mb
->maccc
, 0);
508 out_8(&mb
->imr
, 0xff); /* disable all intrs */
510 /* disable rx and tx dma */
511 st_le32(&rd
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
512 st_le32(&td
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
514 mace_clean_rings(mp
);
519 static inline void mace_set_timeout(struct net_device
*dev
)
521 struct mace_data
*mp
= netdev_priv(dev
);
523 if (mp
->timeout_active
)
524 del_timer(&mp
->tx_timeout
);
525 mp
->tx_timeout
.expires
= jiffies
+ TX_TIMEOUT
;
526 mp
->tx_timeout
.function
= mace_tx_timeout
;
527 mp
->tx_timeout
.data
= (unsigned long) dev
;
528 add_timer(&mp
->tx_timeout
);
529 mp
->timeout_active
= 1;
532 static int mace_xmit_start(struct sk_buff
*skb
, struct net_device
*dev
)
534 struct mace_data
*mp
= netdev_priv(dev
);
535 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
536 volatile struct dbdma_cmd
*cp
, *np
;
540 /* see if there's a free slot in the tx ring */
541 spin_lock_irqsave(&mp
->lock
, flags
);
544 if (next
>= N_TX_RING
)
546 if (next
== mp
->tx_empty
) {
547 netif_stop_queue(dev
);
549 spin_unlock_irqrestore(&mp
->lock
, flags
);
550 return NETDEV_TX_BUSY
; /* can't take it at the moment */
552 spin_unlock_irqrestore(&mp
->lock
, flags
);
554 /* partially fill in the dma command block */
556 if (len
> ETH_FRAME_LEN
) {
557 printk(KERN_DEBUG
"mace: xmit frame too long (%d)\n", len
);
560 mp
->tx_bufs
[fill
] = skb
;
561 cp
= mp
->tx_cmds
+ NCMDS_TX
* fill
;
562 st_le16(&cp
->req_count
, len
);
563 st_le32(&cp
->phy_addr
, virt_to_bus(skb
->data
));
565 np
= mp
->tx_cmds
+ NCMDS_TX
* next
;
566 out_le16(&np
->command
, DBDMA_STOP
);
568 /* poke the tx dma channel */
569 spin_lock_irqsave(&mp
->lock
, flags
);
571 if (!mp
->tx_bad_runt
&& mp
->tx_active
< MAX_TX_ACTIVE
) {
572 out_le16(&cp
->xfer_status
, 0);
573 out_le16(&cp
->command
, OUTPUT_LAST
);
574 out_le32(&td
->control
, ((RUN
|WAKE
) << 16) + (RUN
|WAKE
));
576 mace_set_timeout(dev
);
578 if (++next
>= N_TX_RING
)
580 if (next
== mp
->tx_empty
)
581 netif_stop_queue(dev
);
582 spin_unlock_irqrestore(&mp
->lock
, flags
);
587 static void mace_set_multicast(struct net_device
*dev
)
589 struct mace_data
*mp
= netdev_priv(dev
);
590 volatile struct mace __iomem
*mb
= mp
->mace
;
595 spin_lock_irqsave(&mp
->lock
, flags
);
597 if (dev
->flags
& IFF_PROMISC
) {
600 unsigned char multicast_filter
[8];
601 struct dev_mc_list
*dmi
= dev
->mc_list
;
603 if (dev
->flags
& IFF_ALLMULTI
) {
604 for (i
= 0; i
< 8; i
++)
605 multicast_filter
[i
] = 0xff;
607 for (i
= 0; i
< 8; i
++)
608 multicast_filter
[i
] = 0;
609 for (i
= 0; i
< dev
->mc_count
; i
++) {
610 crc
= ether_crc_le(6, dmi
->dmi_addr
);
611 j
= crc
>> 26; /* bit number in multicast_filter */
612 multicast_filter
[j
>> 3] |= 1 << (j
& 7);
617 printk("Multicast filter :");
618 for (i
= 0; i
< 8; i
++)
619 printk("%02x ", multicast_filter
[i
]);
623 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
624 out_8(&mb
->iac
, LOGADDR
);
626 out_8(&mb
->iac
, ADDRCHG
| LOGADDR
);
627 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
630 for (i
= 0; i
< 8; ++i
)
631 out_8(&mb
->ladrf
, multicast_filter
[i
]);
632 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
636 out_8(&mb
->maccc
, mp
->maccc
);
637 spin_unlock_irqrestore(&mp
->lock
, flags
);
640 static void mace_handle_misc_intrs(struct mace_data
*mp
, int intr
, struct net_device
*dev
)
642 volatile struct mace __iomem
*mb
= mp
->mace
;
643 static int mace_babbles
, mace_jabbers
;
646 dev
->stats
.rx_missed_errors
+= 256;
647 dev
->stats
.rx_missed_errors
+= in_8(&mb
->mpc
); /* reading clears it */
649 dev
->stats
.rx_length_errors
+= 256;
650 dev
->stats
.rx_length_errors
+= in_8(&mb
->rntpc
); /* reading clears it */
652 ++dev
->stats
.tx_heartbeat_errors
;
654 if (mace_babbles
++ < 4)
655 printk(KERN_DEBUG
"mace: babbling transmitter\n");
657 if (mace_jabbers
++ < 4)
658 printk(KERN_DEBUG
"mace: jabbering transceiver\n");
661 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
)
663 struct net_device
*dev
= (struct net_device
*) dev_id
;
664 struct mace_data
*mp
= netdev_priv(dev
);
665 volatile struct mace __iomem
*mb
= mp
->mace
;
666 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
667 volatile struct dbdma_cmd
*cp
;
668 int intr
, fs
, i
, stat
, x
;
671 /* static int mace_last_fs, mace_last_xcount; */
673 spin_lock_irqsave(&mp
->lock
, flags
);
674 intr
= in_8(&mb
->ir
); /* read interrupt register */
675 in_8(&mb
->xmtrc
); /* get retries */
676 mace_handle_misc_intrs(mp
, intr
, dev
);
679 while (in_8(&mb
->pr
) & XMTSV
) {
680 del_timer(&mp
->tx_timeout
);
681 mp
->timeout_active
= 0;
683 * Clear any interrupt indication associated with this status
684 * word. This appears to unlatch any error indication from
685 * the DMA controller.
687 intr
= in_8(&mb
->ir
);
689 mace_handle_misc_intrs(mp
, intr
, dev
);
690 if (mp
->tx_bad_runt
) {
691 fs
= in_8(&mb
->xmtfs
);
693 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
);
696 dstat
= ld_le32(&td
->status
);
697 /* stop DMA controller */
698 out_le32(&td
->control
, RUN
<< 16);
700 * xcount is the number of complete frames which have been
701 * written to the fifo but for which status has not been read.
703 xcount
= (in_8(&mb
->fifofc
) >> XMTFC_SH
) & XMTFC_MASK
;
704 if (xcount
== 0 || (dstat
& DEAD
)) {
706 * If a packet was aborted before the DMA controller has
707 * finished transferring it, it seems that there are 2 bytes
708 * which are stuck in some buffer somewhere. These will get
709 * transmitted as soon as we read the frame status (which
710 * reenables the transmit data transfer request). Turning
711 * off the DMA controller and/or resetting the MACE doesn't
712 * help. So we disable auto-padding and FCS transmission
713 * so the two bytes will only be a runt packet which should
714 * be ignored by other stations.
716 out_8(&mb
->xmtfc
, DXMTFCS
);
718 fs
= in_8(&mb
->xmtfs
);
719 if ((fs
& XMTSV
) == 0) {
720 printk(KERN_ERR
"mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n",
724 * XXX mace likes to hang the machine after a xmtfs error.
725 * This is hard to reproduce, reseting *may* help
728 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
729 stat
= ld_le16(&cp
->xfer_status
);
730 if ((fs
& (UFLO
|LCOL
|LCAR
|RTRY
)) || (dstat
& DEAD
) || xcount
== 0) {
732 * Check whether there were in fact 2 bytes written to
736 x
= (in_8(&mb
->fifofc
) >> XMTFC_SH
) & XMTFC_MASK
;
738 /* there were two bytes with an end-of-packet indication */
740 mace_set_timeout(dev
);
743 * Either there weren't the two bytes buffered up, or they
744 * didn't have an end-of-packet indication.
745 * We flush the transmit FIFO just in case (by setting the
746 * XMTFWU bit with the transmitter disabled).
748 out_8(&mb
->maccc
, in_8(&mb
->maccc
) & ~ENXMT
);
749 out_8(&mb
->fifocc
, in_8(&mb
->fifocc
) | XMTFWU
);
751 out_8(&mb
->maccc
, in_8(&mb
->maccc
) | ENXMT
);
752 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
);
755 /* dma should have finished */
756 if (i
== mp
->tx_fill
) {
757 printk(KERN_DEBUG
"mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n",
762 if (fs
& (UFLO
|LCOL
|LCAR
|RTRY
)) {
763 ++dev
->stats
.tx_errors
;
765 ++dev
->stats
.tx_carrier_errors
;
766 if (fs
& (UFLO
|LCOL
|RTRY
))
767 ++dev
->stats
.tx_aborted_errors
;
769 dev
->stats
.tx_bytes
+= mp
->tx_bufs
[i
]->len
;
770 ++dev
->stats
.tx_packets
;
772 dev_kfree_skb_irq(mp
->tx_bufs
[i
]);
774 if (++i
>= N_TX_RING
)
778 mace_last_xcount
= xcount
;
782 if (i
!= mp
->tx_empty
) {
784 netif_wake_queue(dev
);
790 if (!mp
->tx_bad_runt
&& i
!= mp
->tx_fill
&& mp
->tx_active
< MAX_TX_ACTIVE
) {
792 /* set up the next one */
793 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
794 out_le16(&cp
->xfer_status
, 0);
795 out_le16(&cp
->command
, OUTPUT_LAST
);
797 if (++i
>= N_TX_RING
)
799 } while (i
!= mp
->tx_fill
&& mp
->tx_active
< MAX_TX_ACTIVE
);
800 out_le32(&td
->control
, ((RUN
|WAKE
) << 16) + (RUN
|WAKE
));
801 mace_set_timeout(dev
);
803 spin_unlock_irqrestore(&mp
->lock
, flags
);
807 static void mace_tx_timeout(unsigned long data
)
809 struct net_device
*dev
= (struct net_device
*) data
;
810 struct mace_data
*mp
= netdev_priv(dev
);
811 volatile struct mace __iomem
*mb
= mp
->mace
;
812 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
813 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
814 volatile struct dbdma_cmd
*cp
;
818 spin_lock_irqsave(&mp
->lock
, flags
);
819 mp
->timeout_active
= 0;
820 if (mp
->tx_active
== 0 && !mp
->tx_bad_runt
)
823 /* update various counters */
824 mace_handle_misc_intrs(mp
, in_8(&mb
->ir
), dev
);
826 cp
= mp
->tx_cmds
+ NCMDS_TX
* mp
->tx_empty
;
828 /* turn off both tx and rx and reset the chip */
829 out_8(&mb
->maccc
, 0);
830 printk(KERN_ERR
"mace: transmit timeout - resetting\n");
835 cp
= bus_to_virt(ld_le32(&rd
->cmdptr
));
837 out_le16(&cp
->xfer_status
, 0);
838 out_le32(&rd
->cmdptr
, virt_to_bus(cp
));
839 out_le32(&rd
->control
, (RUN
<< 16) | RUN
);
841 /* fix up the transmit side */
844 ++dev
->stats
.tx_errors
;
845 if (mp
->tx_bad_runt
) {
847 } else if (i
!= mp
->tx_fill
) {
848 dev_kfree_skb(mp
->tx_bufs
[i
]);
849 if (++i
>= N_TX_RING
)
854 netif_wake_queue(dev
);
855 if (i
!= mp
->tx_fill
) {
856 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
857 out_le16(&cp
->xfer_status
, 0);
858 out_le16(&cp
->command
, OUTPUT_LAST
);
859 out_le32(&td
->cmdptr
, virt_to_bus(cp
));
860 out_le32(&td
->control
, (RUN
<< 16) | RUN
);
862 mace_set_timeout(dev
);
865 /* turn it back on */
866 out_8(&mb
->imr
, RCVINT
);
867 out_8(&mb
->maccc
, mp
->maccc
);
870 spin_unlock_irqrestore(&mp
->lock
, flags
);
873 static irqreturn_t
mace_txdma_intr(int irq
, void *dev_id
)
878 static irqreturn_t
mace_rxdma_intr(int irq
, void *dev_id
)
880 struct net_device
*dev
= (struct net_device
*) dev_id
;
881 struct mace_data
*mp
= netdev_priv(dev
);
882 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
883 volatile struct dbdma_cmd
*cp
, *np
;
884 int i
, nb
, stat
, next
;
886 unsigned frame_status
;
887 static int mace_lost_status
;
891 spin_lock_irqsave(&mp
->lock
, flags
);
892 for (i
= mp
->rx_empty
; i
!= mp
->rx_fill
; ) {
893 cp
= mp
->rx_cmds
+ i
;
894 stat
= ld_le16(&cp
->xfer_status
);
895 if ((stat
& ACTIVE
) == 0) {
897 if (next
>= N_RX_RING
)
899 np
= mp
->rx_cmds
+ next
;
900 if (next
!= mp
->rx_fill
901 && (ld_le16(&np
->xfer_status
) & ACTIVE
) != 0) {
902 printk(KERN_DEBUG
"mace: lost a status word\n");
907 nb
= ld_le16(&cp
->req_count
) - ld_le16(&cp
->res_count
);
908 out_le16(&cp
->command
, DBDMA_STOP
);
909 /* got a packet, have a look at it */
910 skb
= mp
->rx_bufs
[i
];
912 ++dev
->stats
.rx_dropped
;
915 frame_status
= (data
[nb
-3] << 8) + data
[nb
-4];
916 if (frame_status
& (RS_OFLO
|RS_CLSN
|RS_FRAMERR
|RS_FCSERR
)) {
917 ++dev
->stats
.rx_errors
;
918 if (frame_status
& RS_OFLO
)
919 ++dev
->stats
.rx_over_errors
;
920 if (frame_status
& RS_FRAMERR
)
921 ++dev
->stats
.rx_frame_errors
;
922 if (frame_status
& RS_FCSERR
)
923 ++dev
->stats
.rx_crc_errors
;
925 /* Mace feature AUTO_STRIP_RCV is on by default, dropping the
926 * FCS on frames with 802.3 headers. This means that Ethernet
927 * frames have 8 extra octets at the end, while 802.3 frames
928 * have only 4. We need to correctly account for this. */
929 if (*(unsigned short *)(data
+12) < 1536) /* 802.3 header */
931 else /* Ethernet header; mace includes FCS */
934 skb
->protocol
= eth_type_trans(skb
, dev
);
935 dev
->stats
.rx_bytes
+= skb
->len
;
937 mp
->rx_bufs
[i
] = NULL
;
938 ++dev
->stats
.rx_packets
;
941 ++dev
->stats
.rx_errors
;
942 ++dev
->stats
.rx_length_errors
;
945 /* advance to next */
946 if (++i
>= N_RX_RING
)
954 if (next
>= N_RX_RING
)
956 if (next
== mp
->rx_empty
)
958 cp
= mp
->rx_cmds
+ i
;
959 skb
= mp
->rx_bufs
[i
];
961 skb
= dev_alloc_skb(RX_BUFLEN
+ 2);
964 mp
->rx_bufs
[i
] = skb
;
967 st_le16(&cp
->req_count
, RX_BUFLEN
);
968 data
= skb
? skb
->data
: dummy_buf
;
969 st_le32(&cp
->phy_addr
, virt_to_bus(data
));
970 out_le16(&cp
->xfer_status
, 0);
971 out_le16(&cp
->command
, INPUT_LAST
+ INTR_ALWAYS
);
973 if ((ld_le32(&rd
->status
) & ACTIVE
) != 0) {
974 out_le32(&rd
->control
, (PAUSE
<< 16) | PAUSE
);
975 while ((in_le32(&rd
->status
) & ACTIVE
) != 0)
981 if (i
!= mp
->rx_fill
) {
982 out_le32(&rd
->control
, ((RUN
|WAKE
) << 16) | (RUN
|WAKE
));
985 spin_unlock_irqrestore(&mp
->lock
, flags
);
989 static struct of_device_id mace_match
[] =
996 MODULE_DEVICE_TABLE (of
, mace_match
);
998 static struct macio_driver mace_driver
=
1001 .match_table
= mace_match
,
1002 .probe
= mace_probe
,
1003 .remove
= mace_remove
,
1007 static int __init
mace_init(void)
1009 return macio_register_driver(&mace_driver
);
1012 static void __exit
mace_cleanup(void)
1014 macio_unregister_driver(&mace_driver
);
1020 MODULE_AUTHOR("Paul Mackerras");
1021 MODULE_DESCRIPTION("PowerMac MACE driver.");
1022 module_param(port_aaui
, int, 0);
1023 MODULE_PARM_DESC(port_aaui
, "MACE uses AAUI port (0-1)");
1024 MODULE_LICENSE("GPL");
1026 module_init(mace_init
);
1027 module_exit(mace_cleanup
);