arch/frv/mb93090-mb00/pci-frv.c

   1 /* pci-frv.c: low-level PCI access routines
   2  *
   3  * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
   4  * Written by David Howells (dhowells@redhat.com)
   5  * - Derived from the i386 equivalent stuff
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License
   9  * as published by the Free Software Foundation; either version
  10  * 2 of the License, or (at your option) any later version.
  11  */
  12
  13 #include <linux/types.h>
  14 #include <linux/kernel.h>
  15 #include <linux/pci.h>
  16 #include <linux/init.h>
  17 #include <linux/ioport.h>
  18 #include <linux/errno.h>
  19
  20 #include "pci-frv.h"
  21
  22 /*
  23  * We need to avoid collisions with `mirrored' VGA ports
  24  * and other strange ISA hardware, so we always want the
  25  * addresses to be allocated in the 0x000-0x0ff region
  26  * modulo 0x400.
  27  *
  28  * Why? Because some silly external IO cards only decode
  29  * the low 10 bits of the IO address. The 0x00-0xff region
  30  * is reserved for motherboard devices that decode all 16
  31  * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
  32  * but we want to try to avoid allocating at 0x2900-0x2bff
  33  * which might have be mirrored at 0x0100-0x03ff..
  34  */
  35 void
  36 pcibios_align_resource(void *data, struct resource *res,
  37                        resource_size_t size, resource_size_t align)
  38 {
  39         if (res->flags & IORESOURCE_IO) {
  40                 resource_size_t start = res->start;
  41
  42                 if (start & 0x300) {
  43                         start = (start + 0x3ff) & ~0x3ff;
  44                         res->start = start;
  45                 }
  46         }
  47 }
  48
  49
  50 /*
  51  *  Handle resources of PCI devices.  If the world were perfect, we could
  52  *  just allocate all the resource regions and do nothing more.  It isn't.
  53  *  On the other hand, we cannot just re-allocate all devices, as it would
  54  *  require us to know lots of host bridge internals.  So we attempt to
  55  *  keep as much of the original configuration as possible, but tweak it
  56  *  when it's found to be wrong.
  57  *
  58  *  Known BIOS problems we have to work around:
  59  *      - I/O or memory regions not configured
  60  *      - regions configured, but not enabled in the command register
  61  *      - bogus I/O addresses above 64K used
  62  *      - expansion ROMs left enabled (this may sound harmless, but given
  63  *        the fact the PCI specs explicitly allow address decoders to be
  64  *        shared between expansion ROMs and other resource regions, it's
  65  *        at least dangerous)
  66  *
  67  *  Our solution:
  68  *      (1) Allocate resources for all buses behind PCI-to-PCI bridges.
  69  *          This gives us fixed barriers on where we can allocate.
  70  *      (2) Allocate resources for all enabled devices.  If there is
  71  *          a collision, just mark the resource as unallocated. Also
  72  *          disable expansion ROMs during this step.
  73  *      (3) Try to allocate resources for disabled devices.  If the
  74  *          resources were assigned correctly, everything goes well,
  75  *          if they weren't, they won't disturb allocation of other
  76  *          resources.
  77  *      (4) Assign new addresses to resources which were either
  78  *          not configured at all or misconfigured.  If explicitly
  79  *          requested by the user, configure expansion ROM address
  80  *          as well.
  81  */
  82
  83 static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
  84 {
  85         struct list_head *ln;
  86         struct pci_bus *bus;
  87         struct pci_dev *dev;
  88         int idx;
  89         struct resource *r;
  90
  91         /* Depth-First Search on bus tree */
  92         for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
  93                 bus = pci_bus_b(ln);
  94                 if ((dev = bus->self)) {
  95                         for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
  96                                 r = &dev->resource[idx];
  97                                 if (!r->start)
  98                                         continue;
  99                                 if (pci_claim_resource(dev, idx) < 0)
 100                                         printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
 101                         }
 102                 }
 103                 pcibios_allocate_bus_resources(&bus->children);
 104         }
 105 }
 106
 107 static void __init pcibios_allocate_resources(int pass)
 108 {
 109         struct pci_dev *dev = NULL;
 110         int idx, disabled;
 111         u16 command;
 112         struct resource *r;
 113
 114         for_each_pci_dev(dev) {
 115                 pci_read_config_word(dev, PCI_COMMAND, &command);
 116                 for(idx = 0; idx < 6; idx++) {
 117                         r = &dev->resource[idx];
 118                         if (r->parent)          /* Already allocated */
 119                                 continue;
 120                         if (!r->start)          /* Address not assigned at all */
 121                                 continue;
 122                         if (r->flags & IORESOURCE_IO)
 123                                 disabled = !(command & PCI_COMMAND_IO);
 124                         else
 125                                 disabled = !(command & PCI_COMMAND_MEMORY);
 126                         if (pass == disabled) {
 127                                 DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
 128                                     r->start, r->end, r->flags, disabled, pass);
 129                                 if (pci_claim_resource(dev, idx) < 0) {
 130                                         printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
 131                                         /* We'll assign a new address later */
 132                                         r->end -= r->start;
 133                                         r->start = 0;
 134                                 }
 135                         }
 136                 }
 137                 if (!pass) {
 138                         r = &dev->resource[PCI_ROM_RESOURCE];
 139                         if (r->flags & IORESOURCE_ROM_ENABLE) {
 140                                 /* Turn the ROM off, leave the resource region, but keep it unregistered. */
 141                                 u32 reg;
 142                                 DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
 143                                 r->flags &= ~IORESOURCE_ROM_ENABLE;
 144                                 pci_read_config_dword(dev, dev->rom_base_reg, &reg);
 145                                 pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE);
 146                         }
 147                 }
 148         }
 149 }
 150
 151 static void __init pcibios_assign_resources(void)
 152 {
 153         struct pci_dev *dev = NULL;
 154         int idx;
 155         struct resource *r;
 156
 157         for_each_pci_dev(dev) {
 158                 int class = dev->class >> 8;
 159
 160                 /* Don't touch classless devices and host bridges */
 161                 if (!class || class == PCI_CLASS_BRIDGE_HOST)
 162                         continue;
 163
 164                 for(idx=0; idx<6; idx++) {
 165                         r = &dev->resource[idx];
 166
 167                         /*
 168                          *  Don't touch IDE controllers and I/O ports of video cards!
 169                          */
 170                         if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
 171                             (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
 172                                 continue;
 173
 174                         /*
 175                          *  We shall assign a new address to this resource, either because
 176                          *  the BIOS forgot to do so or because we have decided the old
 177                          *  address was unusable for some reason.
 178                          */
 179                         if (!r->start && r->end)
 180                                 pci_assign_resource(dev, idx);
 181                 }
 182
 183                 if (pci_probe & PCI_ASSIGN_ROMS) {
 184                         r = &dev->resource[PCI_ROM_RESOURCE];
 185                         r->end -= r->start;
 186                         r->start = 0;
 187                         if (r->end)
 188                                 pci_assign_resource(dev, PCI_ROM_RESOURCE);
 189                 }
 190         }
 191 }
 192
 193 void __init pcibios_resource_survey(void)
 194 {
 195         DBG("PCI: Allocating resources\n");
 196         pcibios_allocate_bus_resources(&pci_root_buses);
 197         pcibios_allocate_resources(0);
 198         pcibios_allocate_resources(1);
 199         pcibios_assign_resources();
 200 }
 201
 202 /*
 203  *  If we set up a device for bus mastering, we need to check the latency
 204  *  timer as certain crappy BIOSes forget to set it properly.
 205  */
 206 unsigned int pcibios_max_latency = 255;
 207
 208 void pcibios_set_master(struct pci_dev *dev)
 209 {
 210         u8 lat;
 211         pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
 212         if (lat < 16)
 213                 lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
 214         else if (lat > pcibios_max_latency)
 215                 lat = pcibios_max_latency;
 216         else
 217                 return;
 218         printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
 219         pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 220 }