Merge branch 'mini2440-dev-unlikely' into mini2440-dev
[linux-2.6/mini2440.git] / arch / blackfin / mach-bf537 / boards / tcm_bf537.c
blob57163b65a4f5d230463d8699e22d4a3253d37d75
1 /*
2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2008-2009 Bluetechnix
4 * 2005 National ICT Australia (NICTA)
5 * Aidan Williams <aidan@nicta.com.au>
7 * Licensed under the GPL-2 or later.
8 */
10 #include <linux/device.h>
11 #include <linux/etherdevice.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/spi/spi.h>
17 #include <linux/spi/flash.h>
18 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
19 #include <linux/usb/isp1362.h>
20 #endif
21 #include <linux/ata_platform.h>
22 #include <linux/irq.h>
23 #include <asm/dma.h>
24 #include <asm/bfin5xx_spi.h>
25 #include <asm/portmux.h>
26 #include <asm/dpmc.h>
27 #include <linux/spi/mmc_spi.h>
30 * Name the Board for the /proc/cpuinfo
32 const char bfin_board_name[] = "Bluetechnix TCM BF537";
34 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
35 /* all SPI peripherals info goes here */
37 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
38 static struct mtd_partition bfin_spi_flash_partitions[] = {
40 .name = "bootloader(spi)",
41 .size = 0x00020000,
42 .offset = 0,
43 .mask_flags = MTD_CAP_ROM
44 }, {
45 .name = "linux kernel(spi)",
46 .size = 0xe0000,
47 .offset = 0x20000
48 }, {
49 .name = "file system(spi)",
50 .size = 0x700000,
51 .offset = 0x00100000,
55 static struct flash_platform_data bfin_spi_flash_data = {
56 .name = "m25p80",
57 .parts = bfin_spi_flash_partitions,
58 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
59 .type = "m25p64",
62 /* SPI flash chip (m25p64) */
63 static struct bfin5xx_spi_chip spi_flash_chip_info = {
64 .enable_dma = 0, /* use dma transfer with this chip*/
65 .bits_per_word = 8,
67 #endif
69 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
70 /* SPI ADC chip */
71 static struct bfin5xx_spi_chip spi_adc_chip_info = {
72 .enable_dma = 1, /* use dma transfer with this chip*/
73 .bits_per_word = 16,
75 #endif
77 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
78 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
79 .enable_dma = 0,
80 .bits_per_word = 16,
82 #endif
84 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
85 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
86 .enable_dma = 0,
87 .bits_per_word = 8,
89 #endif
91 static struct spi_board_info bfin_spi_board_info[] __initdata = {
92 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
94 /* the modalias must be the same as spi device driver name */
95 .modalias = "m25p80", /* Name of spi_driver for this device */
96 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
97 .bus_num = 0, /* Framework bus number */
98 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
99 .platform_data = &bfin_spi_flash_data,
100 .controller_data = &spi_flash_chip_info,
101 .mode = SPI_MODE_3,
103 #endif
105 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
107 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
108 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
109 .bus_num = 0, /* Framework bus number */
110 .chip_select = 1, /* Framework chip select. */
111 .platform_data = NULL, /* No spi_driver specific config */
112 .controller_data = &spi_adc_chip_info,
114 #endif
116 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
118 .modalias = "ad1836",
119 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
120 .bus_num = 0,
121 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
122 .controller_data = &ad1836_spi_chip_info,
124 #endif
126 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
128 .modalias = "mmc_spi",
129 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
130 .bus_num = 0,
131 .chip_select = 1,
132 .controller_data = &mmc_spi_chip_info,
133 .mode = SPI_MODE_3,
135 #endif
138 /* SPI (0) */
139 static struct resource bfin_spi0_resource[] = {
140 [0] = {
141 .start = SPI0_REGBASE,
142 .end = SPI0_REGBASE + 0xFF,
143 .flags = IORESOURCE_MEM,
145 [1] = {
146 .start = CH_SPI,
147 .end = CH_SPI,
148 .flags = IORESOURCE_DMA,
150 [2] = {
151 .start = IRQ_SPI,
152 .end = IRQ_SPI,
153 .flags = IORESOURCE_IRQ,
157 /* SPI controller data */
158 static struct bfin5xx_spi_master bfin_spi0_info = {
159 .num_chipselect = 8,
160 .enable_dma = 1, /* master has the ability to do dma transfer */
161 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
164 static struct platform_device bfin_spi0_device = {
165 .name = "bfin-spi",
166 .id = 0, /* Bus number */
167 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
168 .resource = bfin_spi0_resource,
169 .dev = {
170 .platform_data = &bfin_spi0_info, /* Passed to driver */
173 #endif /* spi master and devices */
175 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
176 static struct platform_device rtc_device = {
177 .name = "rtc-bfin",
178 .id = -1,
180 #endif
182 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
183 static struct platform_device hitachi_fb_device = {
184 .name = "hitachi-tx09",
186 #endif
188 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
189 #include <linux/smc91x.h>
191 static struct smc91x_platdata smc91x_info = {
192 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
193 .leda = RPC_LED_100_10,
194 .ledb = RPC_LED_TX_RX,
197 static struct resource smc91x_resources[] = {
199 .start = 0x20200300,
200 .end = 0x20200300 + 16,
201 .flags = IORESOURCE_MEM,
202 }, {
203 .start = IRQ_PF14,
204 .end = IRQ_PF14,
205 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
209 static struct platform_device smc91x_device = {
210 .name = "smc91x",
211 .id = 0,
212 .num_resources = ARRAY_SIZE(smc91x_resources),
213 .resource = smc91x_resources,
214 .dev = {
215 .platform_data = &smc91x_info,
218 #endif
220 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
221 static struct resource isp1362_hcd_resources[] = {
223 .start = 0x20308000,
224 .end = 0x20308000,
225 .flags = IORESOURCE_MEM,
226 }, {
227 .start = 0x20308004,
228 .end = 0x20308004,
229 .flags = IORESOURCE_MEM,
230 }, {
231 .start = IRQ_PG15,
232 .end = IRQ_PG15,
233 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
237 static struct isp1362_platform_data isp1362_priv = {
238 .sel15Kres = 1,
239 .clknotstop = 0,
240 .oc_enable = 0,
241 .int_act_high = 0,
242 .int_edge_triggered = 0,
243 .remote_wakeup_connected = 0,
244 .no_power_switching = 1,
245 .power_switching_mode = 0,
248 static struct platform_device isp1362_hcd_device = {
249 .name = "isp1362-hcd",
250 .id = 0,
251 .dev = {
252 .platform_data = &isp1362_priv,
254 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
255 .resource = isp1362_hcd_resources,
257 #endif
259 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
260 static struct resource net2272_bfin_resources[] = {
262 .start = 0x20300000,
263 .end = 0x20300000 + 0x100,
264 .flags = IORESOURCE_MEM,
265 }, {
266 .start = IRQ_PG13,
267 .end = IRQ_PG13,
268 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
272 static struct platform_device net2272_bfin_device = {
273 .name = "net2272",
274 .id = -1,
275 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
276 .resource = net2272_bfin_resources,
278 #endif
280 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
281 static struct mtd_partition cm_partitions[] = {
283 .name = "bootloader(nor)",
284 .size = 0x40000,
285 .offset = 0,
286 }, {
287 .name = "linux kernel(nor)",
288 .size = 0x100000,
289 .offset = MTDPART_OFS_APPEND,
290 }, {
291 .name = "file system(nor)",
292 .size = MTDPART_SIZ_FULL,
293 .offset = MTDPART_OFS_APPEND,
297 static struct physmap_flash_data cm_flash_data = {
298 .width = 2,
299 .parts = cm_partitions,
300 .nr_parts = ARRAY_SIZE(cm_partitions),
303 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
305 static struct resource cm_flash_resource[] = {
307 .name = "cfi_probe",
308 .start = 0x20000000,
309 .end = 0x201fffff,
310 .flags = IORESOURCE_MEM,
311 }, {
312 .start = (unsigned long)cm_flash_gpios,
313 .end = ARRAY_SIZE(cm_flash_gpios),
314 .flags = IORESOURCE_IRQ,
318 static struct platform_device cm_flash_device = {
319 .name = "gpio-addr-flash",
320 .id = 0,
321 .dev = {
322 .platform_data = &cm_flash_data,
324 .num_resources = ARRAY_SIZE(cm_flash_resource),
325 .resource = cm_flash_resource,
327 #endif
329 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
330 static struct resource bfin_uart_resources[] = {
332 .start = 0xFFC00400,
333 .end = 0xFFC004FF,
334 .flags = IORESOURCE_MEM,
335 }, {
336 .start = 0xFFC02000,
337 .end = 0xFFC020FF,
338 .flags = IORESOURCE_MEM,
342 static struct platform_device bfin_uart_device = {
343 .name = "bfin-uart",
344 .id = 1,
345 .num_resources = ARRAY_SIZE(bfin_uart_resources),
346 .resource = bfin_uart_resources,
348 #endif
350 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
351 #ifdef CONFIG_BFIN_SIR0
352 static struct resource bfin_sir0_resources[] = {
354 .start = 0xFFC00400,
355 .end = 0xFFC004FF,
356 .flags = IORESOURCE_MEM,
359 .start = IRQ_UART0_RX,
360 .end = IRQ_UART0_RX+1,
361 .flags = IORESOURCE_IRQ,
364 .start = CH_UART0_RX,
365 .end = CH_UART0_RX+1,
366 .flags = IORESOURCE_DMA,
370 static struct platform_device bfin_sir0_device = {
371 .name = "bfin_sir",
372 .id = 0,
373 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
374 .resource = bfin_sir0_resources,
376 #endif
377 #ifdef CONFIG_BFIN_SIR1
378 static struct resource bfin_sir1_resources[] = {
380 .start = 0xFFC02000,
381 .end = 0xFFC020FF,
382 .flags = IORESOURCE_MEM,
385 .start = IRQ_UART1_RX,
386 .end = IRQ_UART1_RX+1,
387 .flags = IORESOURCE_IRQ,
390 .start = CH_UART1_RX,
391 .end = CH_UART1_RX+1,
392 .flags = IORESOURCE_DMA,
396 static struct platform_device bfin_sir1_device = {
397 .name = "bfin_sir",
398 .id = 1,
399 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
400 .resource = bfin_sir1_resources,
402 #endif
403 #endif
405 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
406 static struct resource bfin_twi0_resource[] = {
407 [0] = {
408 .start = TWI0_REGBASE,
409 .end = TWI0_REGBASE,
410 .flags = IORESOURCE_MEM,
412 [1] = {
413 .start = IRQ_TWI,
414 .end = IRQ_TWI,
415 .flags = IORESOURCE_IRQ,
419 static struct platform_device i2c_bfin_twi_device = {
420 .name = "i2c-bfin-twi",
421 .id = 0,
422 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
423 .resource = bfin_twi0_resource,
425 #endif
427 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
428 static struct platform_device bfin_sport0_uart_device = {
429 .name = "bfin-sport-uart",
430 .id = 0,
433 static struct platform_device bfin_sport1_uart_device = {
434 .name = "bfin-sport-uart",
435 .id = 1,
437 #endif
439 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
440 static struct platform_device bfin_mii_bus = {
441 .name = "bfin_mii_bus",
444 static struct platform_device bfin_mac_device = {
445 .name = "bfin_mac",
446 .dev.platform_data = &bfin_mii_bus,
448 #endif
450 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
451 #define PATA_INT IRQ_PF14
453 static struct pata_platform_info bfin_pata_platform_data = {
454 .ioport_shift = 2,
455 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
458 static struct resource bfin_pata_resources[] = {
460 .start = 0x2030C000,
461 .end = 0x2030C01F,
462 .flags = IORESOURCE_MEM,
465 .start = 0x2030D018,
466 .end = 0x2030D01B,
467 .flags = IORESOURCE_MEM,
470 .start = PATA_INT,
471 .end = PATA_INT,
472 .flags = IORESOURCE_IRQ,
476 static struct platform_device bfin_pata_device = {
477 .name = "pata_platform",
478 .id = -1,
479 .num_resources = ARRAY_SIZE(bfin_pata_resources),
480 .resource = bfin_pata_resources,
481 .dev = {
482 .platform_data = &bfin_pata_platform_data,
485 #endif
487 static const unsigned int cclk_vlev_datasheet[] =
489 VRPAIR(VLEV_085, 250000000),
490 VRPAIR(VLEV_090, 376000000),
491 VRPAIR(VLEV_095, 426000000),
492 VRPAIR(VLEV_100, 426000000),
493 VRPAIR(VLEV_105, 476000000),
494 VRPAIR(VLEV_110, 476000000),
495 VRPAIR(VLEV_115, 476000000),
496 VRPAIR(VLEV_120, 500000000),
497 VRPAIR(VLEV_125, 533000000),
498 VRPAIR(VLEV_130, 600000000),
501 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
502 .tuple_tab = cclk_vlev_datasheet,
503 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
504 .vr_settling_time = 25 /* us */,
507 static struct platform_device bfin_dpmc = {
508 .name = "bfin dpmc",
509 .dev = {
510 .platform_data = &bfin_dmpc_vreg_data,
514 static struct platform_device *cm_bf537_devices[] __initdata = {
516 &bfin_dpmc,
518 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
519 &hitachi_fb_device,
520 #endif
522 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
523 &rtc_device,
524 #endif
526 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
527 &bfin_uart_device,
528 #endif
530 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
531 #ifdef CONFIG_BFIN_SIR0
532 &bfin_sir0_device,
533 #endif
534 #ifdef CONFIG_BFIN_SIR1
535 &bfin_sir1_device,
536 #endif
537 #endif
539 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
540 &i2c_bfin_twi_device,
541 #endif
543 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
544 &bfin_sport0_uart_device,
545 &bfin_sport1_uart_device,
546 #endif
548 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
549 &isp1362_hcd_device,
550 #endif
552 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
553 &smc91x_device,
554 #endif
556 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
557 &bfin_mii_bus,
558 &bfin_mac_device,
559 #endif
561 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
562 &net2272_bfin_device,
563 #endif
565 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
566 &bfin_spi0_device,
567 #endif
569 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
570 &bfin_pata_device,
571 #endif
573 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
574 &cm_flash_device,
575 #endif
578 static int __init tcm_bf537_init(void)
580 printk(KERN_INFO "%s(): registering device resources\n", __func__);
581 platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
582 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
583 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
584 #endif
586 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
587 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
588 #endif
589 return 0;
592 arch_initcall(tcm_bf537_init);
594 void bfin_get_ether_addr(char *addr)
596 random_ether_addr(addr);
597 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
599 EXPORT_SYMBOL(bfin_get_ether_addr);