?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
virtio_blk: don't bounce highmem requests
[linux-2.6/mini2440.git] / drivers / usb / host / ohci-pxa27x.c
blobe44dc2cbca24006e1b81d57cf589213ee823295c
1 /*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 * (C) Copyright 2002 Hewlett-Packard Company
7 *
8 * Bus Glue for pxa27x
9 *
10 * Written by Christopher Hoover <ch@hpl.hp.com>
11 * Based on fragments of previous driver by Russell King et al.
12 *
13 * Modified for LH7A404 from ohci-sa1111.c
14 * by Durgesh Pattamatta <pattamattad@sharpsec.com>
15 *
16 * Modified for pxa27x from ohci-lh7a404.c
17 * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
18 *
19 * This file is licenced under the GPL.
20 */
21
22 #include <linux/device.h>
23 #include <linux/signal.h>
24 #include <linux/platform_device.h>
25 #include <linux/clk.h>
26 #include <mach/ohci.h>
27
28 /*
29 * UHC: USB Host Controller (OHCI-like) register definitions
30 */
31 #define UHCREV (0x0000) /* UHC HCI Spec Revision */
32 #define UHCHCON (0x0004) /* UHC Host Control Register */
33 #define UHCCOMS (0x0008) /* UHC Command Status Register */
34 #define UHCINTS (0x000C) /* UHC Interrupt Status Register */
35 #define UHCINTE (0x0010) /* UHC Interrupt Enable */
36 #define UHCINTD (0x0014) /* UHC Interrupt Disable */
37 #define UHCHCCA (0x0018) /* UHC Host Controller Comm. Area */
38 #define UHCPCED (0x001C) /* UHC Period Current Endpt Descr */
39 #define UHCCHED (0x0020) /* UHC Control Head Endpt Descr */
40 #define UHCCCED (0x0024) /* UHC Control Current Endpt Descr */
41 #define UHCBHED (0x0028) /* UHC Bulk Head Endpt Descr */
42 #define UHCBCED (0x002C) /* UHC Bulk Current Endpt Descr */
43 #define UHCDHEAD (0x0030) /* UHC Done Head */
44 #define UHCFMI (0x0034) /* UHC Frame Interval */
45 #define UHCFMR (0x0038) /* UHC Frame Remaining */
46 #define UHCFMN (0x003C) /* UHC Frame Number */
47 #define UHCPERS (0x0040) /* UHC Periodic Start */
48 #define UHCLS (0x0044) /* UHC Low Speed Threshold */
49
50 #define UHCRHDA (0x0048) /* UHC Root Hub Descriptor A */
51 #define UHCRHDA_NOCP (1 << 12) /* No over current protection */
52 #define UHCRHDA_OCPM (1 << 11) /* Over Current Protection Mode */
53 #define UHCRHDA_POTPGT(x) \
54 (((x) & 0xff) << 24) /* Power On To Power Good Time */
55
56 #define UHCRHDB (0x004C) /* UHC Root Hub Descriptor B */
57 #define UHCRHS (0x0050) /* UHC Root Hub Status */
58 #define UHCRHPS1 (0x0054) /* UHC Root Hub Port 1 Status */
59 #define UHCRHPS2 (0x0058) /* UHC Root Hub Port 2 Status */
60 #define UHCRHPS3 (0x005C) /* UHC Root Hub Port 3 Status */
61
62 #define UHCSTAT (0x0060) /* UHC Status Register */
63 #define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
64 #define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
65 #define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
66 #define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
67 #define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
68 #define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
69 #define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
70 #define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
71 #define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
72
73 #define UHCHR (0x0064) /* UHC Reset Register */
74 #define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
75 #define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
76 #define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
77 #define UHCHR_PCPL (1 << 7) /* Power control polarity low */
78 #define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
79 #define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
80 #define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
81 #define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
82 #define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
83 #define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
84 #define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
85
86 #define UHCHIE (0x0068) /* UHC Interrupt Enable Register*/
87 #define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
88 #define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
89 #define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
90 #define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
91 #define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
92 Interrupt Enable*/
93 #define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
94 #define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
95
96 #define UHCHIT (0x006C) /* UHC Interrupt Test register */
97
98 #define PXA_UHC_MAX_PORTNUM 3
99
100 struct pxa27x_ohci {
101 /* must be 1st member here for hcd_to_ohci() to work */
102 struct ohci_hcd ohci;
103
104 struct device *dev;
105 struct clk *clk;
106 void __iomem *mmio_base;
107 };
108
109 #define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd)
110
111 /*
112 PMM_NPS_MODE -- PMM Non-power switching mode
113 Ports are powered continuously.
114
115 PMM_GLOBAL_MODE -- PMM global switching mode
116 All ports are powered at the same time.
117
118 PMM_PERPORT_MODE -- PMM per port switching mode
119 Ports are powered individually.
120 */
121 static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode)
122 {
123 uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
124 uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB);
125
126 switch (mode) {
127 case PMM_NPS_MODE:
128 uhcrhda |= RH_A_NPS;
129 break;
130 case PMM_GLOBAL_MODE:
131 uhcrhda &= ~(RH_A_NPS & RH_A_PSM);
132 break;
133 case PMM_PERPORT_MODE:
134 uhcrhda &= ~(RH_A_NPS);
135 uhcrhda |= RH_A_PSM;
136
137 /* Set port power control mask bits, only 3 ports. */
138 uhcrhdb |= (0x7<<17);
139 break;
140 default:
141 printk( KERN_ERR
142 "Invalid mode %d, set to non-power switch mode.\n",
143 mode );
144
145 uhcrhda |= RH_A_NPS;
146 }
147
148 __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
149 __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB);
150 return 0;
151 }
152
153 extern int usb_disabled(void);
154
155 /*-------------------------------------------------------------------------*/
156
157 static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci,
158 struct pxaohci_platform_data *inf)
159 {
160 uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
161 uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
162
163 if (inf->flags & ENABLE_PORT1)
164 uhchr &= ~UHCHR_SSEP1;
165
166 if (inf->flags & ENABLE_PORT2)
167 uhchr &= ~UHCHR_SSEP2;
168
169 if (inf->flags & ENABLE_PORT3)
170 uhchr &= ~UHCHR_SSEP3;
171
172 if (inf->flags & POWER_CONTROL_LOW)
173 uhchr |= UHCHR_PCPL;
174
175 if (inf->flags & POWER_SENSE_LOW)
176 uhchr |= UHCHR_PSPL;
177
178 if (inf->flags & NO_OC_PROTECTION)
179 uhcrhda |= UHCRHDA_NOCP;
180
181 if (inf->flags & OC_MODE_PERPORT)
182 uhcrhda |= UHCRHDA_OCPM;
183
184 if (inf->power_on_delay) {
185 uhcrhda &= ~UHCRHDA_POTPGT(0xff);
186 uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2);
187 }
188
189 __raw_writel(uhchr, ohci->mmio_base + UHCHR);
190 __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
191 }
192
193 static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
194 {
195 uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
196
197 __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR);
198 udelay(11);
199 __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
200 }
201
202 #ifdef CONFIG_CPU_PXA27x
203 extern void pxa27x_clear_otgph(void);
204 #else
205 #define pxa27x_clear_otgph() do {} while (0)
206 #endif
207
208 static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
209 {
210 int retval = 0;
211 struct pxaohci_platform_data *inf;
212 uint32_t uhchr;
213
214 inf = dev->platform_data;
215
216 clk_enable(ohci->clk);
217
218 pxa27x_reset_hc(ohci);
219
220 uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
221 __raw_writel(uhchr, ohci->mmio_base + UHCHR);
222
223 while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
224 cpu_relax();
225
226 pxa27x_setup_hc(ohci, inf);
227
228 if (inf->init)
229 retval = inf->init(dev);
230
231 if (retval < 0)
232 return retval;
233
234 uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
235 __raw_writel(uhchr, ohci->mmio_base + UHCHR);
236 __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
237
238 /* Clear any OTG Pin Hold */
239 pxa27x_clear_otgph();
240 return 0;
241 }
242
243 static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
244 {
245 struct pxaohci_platform_data *inf;
246 uint32_t uhccoms;
247
248 inf = dev->platform_data;
249
250 if (inf->exit)
251 inf->exit(dev);
252
253 pxa27x_reset_hc(ohci);
254
255 /* Host Controller Reset */
256 uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01;
257 __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS);
258 udelay(10);
259
260 clk_disable(ohci->clk);
261 }
262
263
264 /*-------------------------------------------------------------------------*/
265
266 /* configure so an HC device and id are always provided */
267 /* always called with process context; sleeping is OK */
268
269
270 /**
271 * usb_hcd_pxa27x_probe - initialize pxa27x-based HCDs
272 * Context: !in_interrupt()
273 *
274 * Allocates basic resources for this USB host controller, and
275 * then invokes the start() method for the HCD associated with it
276 * through the hotplug entry's driver_data.
277 *
278 */
279 int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
280 {
281 int retval, irq;
282 struct usb_hcd *hcd;
283 struct pxaohci_platform_data *inf;
284 struct pxa27x_ohci *ohci;
285 struct resource *r;
286 struct clk *usb_clk;
287
288 inf = pdev->dev.platform_data;
289
290 if (!inf)
291 return -ENODEV;
292
293 irq = platform_get_irq(pdev, 0);
294 if (irq < 0) {
295 pr_err("no resource of IORESOURCE_IRQ");
296 return -ENXIO;
297 }
298
299 usb_clk = clk_get(&pdev->dev, NULL);
300 if (IS_ERR(usb_clk))
301 return PTR_ERR(usb_clk);
302
303 hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
304 if (!hcd)
305 return -ENOMEM;
306
307 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
308 if (!r) {
309 pr_err("no resource of IORESOURCE_MEM");
310 retval = -ENXIO;
311 goto err1;
312 }
313
314 hcd->rsrc_start = r->start;
315 hcd->rsrc_len = resource_size(r);
316
317 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
318 pr_debug("request_mem_region failed");
319 retval = -EBUSY;
320 goto err1;
321 }
322
323 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
324 if (!hcd->regs) {
325 pr_debug("ioremap failed");
326 retval = -ENOMEM;
327 goto err2;
328 }
329
330 /* initialize "struct pxa27x_ohci" */
331 ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd);
332 ohci->dev = &pdev->dev;
333 ohci->clk = usb_clk;
334 ohci->mmio_base = (void __iomem *)hcd->regs;
335
336 if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) {
337 pr_debug("pxa27x_start_hc failed");
338 goto err3;
339 }
340
341 /* Select Power Management Mode */
342 pxa27x_ohci_select_pmm(ohci, inf->port_mode);
343
344 if (inf->power_budget)
345 hcd->power_budget = inf->power_budget;
346
347 ohci_hcd_init(hcd_to_ohci(hcd));
348
349 retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
350 if (retval == 0)
351 return retval;
352
353 pxa27x_stop_hc(ohci, &pdev->dev);
354 err3:
355 iounmap(hcd->regs);
356 err2:
357 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
358 err1:
359 usb_put_hcd(hcd);
360 clk_put(usb_clk);
361 return retval;
362 }
363
364
365 /* may be called without controller electrically present */
366 /* may be called with controller, bus, and devices active */
367
368 /**
369 * usb_hcd_pxa27x_remove - shutdown processing for pxa27x-based HCDs
370 * @dev: USB Host Controller being removed
371 * Context: !in_interrupt()
372 *
373 * Reverses the effect of usb_hcd_pxa27x_probe(), first invoking
374 * the HCD's stop() method. It is always called from a thread
375 * context, normally "rmmod", "apmd", or something similar.
376 *
377 */
378 void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
379 {
380 struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
381
382 usb_remove_hcd(hcd);
383 pxa27x_stop_hc(ohci, &pdev->dev);
384 iounmap(hcd->regs);
385 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
386 usb_put_hcd(hcd);
387 clk_put(ohci->clk);
388 }
389
390 /*-------------------------------------------------------------------------*/
391
392 static int __devinit
393 ohci_pxa27x_start (struct usb_hcd *hcd)
394 {
395 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
396 int ret;
397
398 ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
399
400 /* The value of NDP in roothub_a is incorrect on this hardware */
401 ohci->num_ports = 3;
402
403 if ((ret = ohci_init(ohci)) < 0)
404 return ret;
405
406 if ((ret = ohci_run (ohci)) < 0) {
407 err ("can't start %s", hcd->self.bus_name);
408 ohci_stop (hcd);
409 return ret;
410 }
411
412 return 0;
413 }
414
415 /*-------------------------------------------------------------------------*/
416
417 static const struct hc_driver ohci_pxa27x_hc_driver = {
418 .description = hcd_name,
419 .product_desc = "PXA27x OHCI",
420 .hcd_priv_size = sizeof(struct pxa27x_ohci),
421
422 /*
423 * generic hardware linkage
424 */
425 .irq = ohci_irq,
426 .flags = HCD_USB11 | HCD_MEMORY,
427
428 /*
429 * basic lifecycle operations
430 */
431 .start = ohci_pxa27x_start,
432 .stop = ohci_stop,
433 .shutdown = ohci_shutdown,
434
435 /*
436 * managing i/o requests and associated device resources
437 */
438 .urb_enqueue = ohci_urb_enqueue,
439 .urb_dequeue = ohci_urb_dequeue,
440 .endpoint_disable = ohci_endpoint_disable,
441
442 /*
443 * scheduling support
444 */
445 .get_frame_number = ohci_get_frame,
446
447 /*
448 * root hub support
449 */
450 .hub_status_data = ohci_hub_status_data,
451 .hub_control = ohci_hub_control,
452 #ifdef CONFIG_PM
453 .bus_suspend = ohci_bus_suspend,
454 .bus_resume = ohci_bus_resume,
455 #endif
456 .start_port_reset = ohci_start_port_reset,
457 };
458
459 /*-------------------------------------------------------------------------*/
460
461 static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev)
462 {
463 pr_debug ("In ohci_hcd_pxa27x_drv_probe");
464
465 if (usb_disabled())
466 return -ENODEV;
467
468 return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
469 }
470
471 static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
472 {
473 struct usb_hcd *hcd = platform_get_drvdata(pdev);
474
475 usb_hcd_pxa27x_remove(hcd, pdev);
476 platform_set_drvdata(pdev, NULL);
477 return 0;
478 }
479
480 #ifdef CONFIG_PM
481 static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
482 {
483 struct usb_hcd *hcd = platform_get_drvdata(pdev);
484 struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
485
486 if (time_before(jiffies, ohci->ohci.next_statechange))
487 msleep(5);
488 ohci->ohci.next_statechange = jiffies;
489
490 pxa27x_stop_hc(ohci, &pdev->dev);
491 hcd->state = HC_STATE_SUSPENDED;
492
493 return 0;
494 }
495
496 static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
497 {
498 struct usb_hcd *hcd = platform_get_drvdata(pdev);
499 struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
500 int status;
501
502 if (time_before(jiffies, ohci->ohci.next_statechange))
503 msleep(5);
504 ohci->ohci.next_statechange = jiffies;
505
506 if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
507 return status;
508
509 ohci_finish_controller_resume(hcd);
510 return 0;
511 }
512 #endif
513
514 /* work with hotplug and coldplug */
515 MODULE_ALIAS("platform:pxa27x-ohci");
516
517 static struct platform_driver ohci_hcd_pxa27x_driver = {
518 .probe = ohci_hcd_pxa27x_drv_probe,
519 .remove = ohci_hcd_pxa27x_drv_remove,
520 .shutdown = usb_hcd_platform_shutdown,
521 #ifdef CONFIG_PM
522 .suspend = ohci_hcd_pxa27x_drv_suspend,
523 .resume = ohci_hcd_pxa27x_drv_resume,
524 #endif
525 .driver = {
526 .name = "pxa27x-ohci",
527 .owner = THIS_MODULE,
528 },
529 };
530
Support for the Chinese Samsung S3C2440 based development boards