2 * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
4 * VGA text mode console part
6 * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
8 * If distributed as part of the Linux kernel, this code is licensed under the
11 * Otherwise, the following license terms apply:
13 * * Redistribution and use in source and binary forms, with or without
14 * * modification, are permitted provided that the following conditions
16 * * 1) Redistributions of source code must retain the above copyright
17 * * notice, this list of conditions and the following disclaimer.
18 * * 2) Redistributions in binary form must reproduce the above copyright
19 * * notice, this list of conditions and the following disclaimer in the
20 * * documentation and/or other materials provided with the distribution.
21 * * 3) The name of the author may not be used to endorse or promote products
22 * * derived from this software without specific psisusbr written permission.
24 * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
25 * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26 * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27 * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
29 * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
30 * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
31 * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
32 * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
33 * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 * Author: Thomas Winischhofer <thomas@winischhofer.net>
37 * Portions based on vgacon.c which are
38 * Created 28 Sep 1997 by Geert Uytterhoeven
39 * Rewritten by Martin Mares <mj@ucw.cz>, July 1998
40 * based on code Copyright (C) 1991, 1992 Linus Torvalds
43 * A note on using in_atomic() in here: We can't handle console
44 * calls from non-schedulable context due to our USB-dependend
45 * nature. For now, this driver just ignores any calls if it
50 #include <linux/mutex.h>
51 #include <linux/module.h>
52 #include <linux/kernel.h>
53 #include <linux/signal.h>
55 #include <linux/usb.h>
56 #include <linux/tty.h>
57 #include <linux/console.h>
58 #include <linux/string.h>
60 #include <linux/init.h>
61 #include <linux/slab.h>
62 #include <linux/vt_kern.h>
63 #include <linux/selection.h>
64 #include <linux/spinlock.h>
65 #include <linux/kref.h>
66 #include <linux/ioport.h>
67 #include <linux/interrupt.h>
68 #include <linux/vmalloc.h>
71 #include "sisusb_init.h"
73 #ifdef INCL_SISUSB_CON
75 #define sisusbcon_writew(val, addr) (*(addr) = (val))
76 #define sisusbcon_readw(addr) (*(addr))
77 #define sisusbcon_memmovew(d, s, c) memmove(d, s, c)
78 #define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c)
80 /* vc_data -> sisusb conversion table */
81 static struct sisusb_usb_data
*mysisusbs
[MAX_NR_CONSOLES
];
83 /* Forward declaration */
84 static const struct consw sisusb_con
;
87 sisusbcon_memsetw(u16
*s
, u16 c
, unsigned int count
)
91 sisusbcon_writew(c
, s
++);
95 sisusb_initialize(struct sisusb_usb_data
*sisusb
)
97 /* Reset cursor and start address */
98 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0c, 0x00))
100 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0d, 0x00))
102 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0e, 0x00))
104 sisusb_setidxreg(sisusb
, SISCR
, 0x0f, 0x00);
108 sisusbcon_set_start_address(struct sisusb_usb_data
*sisusb
, struct vc_data
*c
)
110 sisusb
->cur_start_addr
= (c
->vc_visible_origin
- sisusb
->scrbuf
) / 2;
112 sisusb_setidxreg(sisusb
, SISCR
, 0x0c, (sisusb
->cur_start_addr
>> 8));
113 sisusb_setidxreg(sisusb
, SISCR
, 0x0d, (sisusb
->cur_start_addr
& 0xff));
117 sisusb_set_cursor(struct sisusb_usb_data
*sisusb
, unsigned int location
)
119 if (sisusb
->sisusb_cursor_loc
== location
)
122 sisusb
->sisusb_cursor_loc
= location
;
124 /* Hardware bug: Text cursor appears twice or not at all
125 * at some positions. Work around it with the cursor skew
129 if ((location
& 0x0007) == 0x0007) {
130 sisusb
->bad_cursor_pos
= 1;
132 if (sisusb_setidxregandor(sisusb
, SISCR
, 0x0b, 0x1f, 0x20))
134 } else if (sisusb
->bad_cursor_pos
) {
135 if (sisusb_setidxregand(sisusb
, SISCR
, 0x0b, 0x1f))
137 sisusb
->bad_cursor_pos
= 0;
140 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0e, (location
>> 8)))
142 sisusb_setidxreg(sisusb
, SISCR
, 0x0f, (location
& 0xff));
145 static inline struct sisusb_usb_data
*
146 sisusb_get_sisusb(unsigned short console
)
148 return mysisusbs
[console
];
152 sisusb_sisusb_valid(struct sisusb_usb_data
*sisusb
)
154 if (!sisusb
->present
|| !sisusb
->ready
|| !sisusb
->sisusb_dev
)
160 static struct sisusb_usb_data
*
161 sisusb_get_sisusb_lock_and_check(unsigned short console
)
163 struct sisusb_usb_data
*sisusb
;
165 /* We can't handle console calls in non-schedulable
166 * context due to our locks and the USB transport.
167 * So we simply ignore them. This should only affect
168 * some calls to printk.
173 if (!(sisusb
= sisusb_get_sisusb(console
)))
176 mutex_lock(&sisusb
->lock
);
178 if (!sisusb_sisusb_valid(sisusb
) ||
179 !sisusb
->havethisconsole
[console
]) {
180 mutex_unlock(&sisusb
->lock
);
188 sisusb_is_inactive(struct vc_data
*c
, struct sisusb_usb_data
*sisusb
)
190 if (sisusb
->is_gfx
||
191 sisusb
->textmodedestroyed
||
192 c
->vc_mode
!= KD_TEXT
)
198 /* con_startup console interface routine */
200 sisusbcon_startup(void)
205 /* con_init console interface routine */
207 sisusbcon_init(struct vc_data
*c
, int init
)
209 struct sisusb_usb_data
*sisusb
;
212 /* This is called by take_over_console(),
213 * ie by us/under our control. It is
214 * only called after text mode and fonts
215 * are set up/restored.
218 if (!(sisusb
= sisusb_get_sisusb(c
->vc_num
)))
221 mutex_lock(&sisusb
->lock
);
223 if (!sisusb_sisusb_valid(sisusb
)) {
224 mutex_unlock(&sisusb
->lock
);
228 c
->vc_can_do_color
= 1;
230 c
->vc_complement_mask
= 0x7700;
232 c
->vc_hi_font_mask
= sisusb
->current_font_512
? 0x0800 : 0;
234 sisusb
->haveconsole
= 1;
236 sisusb
->havethisconsole
[c
->vc_num
] = 1;
238 /* We only support 640x400 */
239 c
->vc_scan_lines
= 400;
241 c
->vc_font
.height
= sisusb
->current_font_height
;
243 /* We only support width = 8 */
245 rows
= c
->vc_scan_lines
/ c
->vc_font
.height
;
247 /* Increment usage count for our sisusb.
248 * Doing so saves us from upping/downing
249 * the disconnect semaphore; we can't
250 * lose our sisusb until this is undone
251 * in con_deinit. For all other console
252 * interface functions, it suffices to
253 * use sisusb->lock and do a quick check
254 * of sisusb for device disconnection.
256 kref_get(&sisusb
->kref
);
258 if (!*c
->vc_uni_pagedir_loc
)
259 con_set_default_unimap(c
);
261 mutex_unlock(&sisusb
->lock
);
267 vc_resize(c
, cols
, rows
);
270 /* con_deinit console interface routine */
272 sisusbcon_deinit(struct vc_data
*c
)
274 struct sisusb_usb_data
*sisusb
;
277 /* This is called by take_over_console()
278 * and others, ie not under our control.
281 if (!(sisusb
= sisusb_get_sisusb(c
->vc_num
)))
284 mutex_lock(&sisusb
->lock
);
286 /* Clear ourselves in mysisusbs */
287 mysisusbs
[c
->vc_num
] = NULL
;
289 sisusb
->havethisconsole
[c
->vc_num
] = 0;
291 /* Free our font buffer if all consoles are gone */
292 if (sisusb
->font_backup
) {
293 for(i
= 0; i
< MAX_NR_CONSOLES
; i
++) {
294 if (sisusb
->havethisconsole
[c
->vc_num
])
297 if (i
== MAX_NR_CONSOLES
) {
298 vfree(sisusb
->font_backup
);
299 sisusb
->font_backup
= NULL
;
303 mutex_unlock(&sisusb
->lock
);
305 /* decrement the usage count on our sisusb */
306 kref_put(&sisusb
->kref
, sisusb_delete
);
309 /* interface routine */
311 sisusbcon_build_attr(struct vc_data
*c
, u8 color
, u8 intensity
,
312 u8 blink
, u8 underline
, u8 reverse
, u8 unused
)
317 attr
= (attr
& 0xf0) | c
->vc_ulcolor
;
318 else if (intensity
== 0)
319 attr
= (attr
& 0xf0) | c
->vc_halfcolor
;
322 attr
= ((attr
) & 0x88) |
324 ((attr
) << 4)) & 0x77);
335 /* Interface routine */
337 sisusbcon_invert_region(struct vc_data
*vc
, u16
*p
, int count
)
339 /* Invert a region. This is called with a pointer
340 * to the console's internal screen buffer. So we
341 * simply do the inversion there and rely on
342 * a call to putc(s) to update the real screen.
346 u16 a
= sisusbcon_readw(p
);
349 (((a
) & 0x7000) >> 4) |
350 (((a
) & 0x0700) << 4);
352 sisusbcon_writew(a
, p
++);
356 #define SISUSB_VADDR(x,y) \
357 ((u16 *)c->vc_origin + \
358 (y) * sisusb->sisusb_num_columns + \
361 #define SISUSB_HADDR(x,y) \
362 ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \
363 (y) * sisusb->sisusb_num_columns + \
366 /* Interface routine */
368 sisusbcon_putc(struct vc_data
*c
, int ch
, int y
, int x
)
370 struct sisusb_usb_data
*sisusb
;
373 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
376 /* sisusb->lock is down */
377 if (sisusb_is_inactive(c
, sisusb
)) {
378 mutex_unlock(&sisusb
->lock
);
383 sisusb_copy_memory(sisusb
, (char *)SISUSB_VADDR(x
, y
),
384 (long)SISUSB_HADDR(x
, y
), 2, &written
);
386 mutex_unlock(&sisusb
->lock
);
389 /* Interface routine */
391 sisusbcon_putcs(struct vc_data
*c
, const unsigned short *s
,
392 int count
, int y
, int x
)
394 struct sisusb_usb_data
*sisusb
;
399 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
402 /* sisusb->lock is down */
404 /* Need to put the characters into the buffer ourselves,
405 * because the vt does this AFTER calling us.
408 dest
= SISUSB_VADDR(x
, y
);
410 for (i
= count
; i
> 0; i
--)
411 sisusbcon_writew(sisusbcon_readw(s
++), dest
++);
413 if (sisusb_is_inactive(c
, sisusb
)) {
414 mutex_unlock(&sisusb
->lock
);
418 sisusb_copy_memory(sisusb
, (char *)SISUSB_VADDR(x
, y
),
419 (long)SISUSB_HADDR(x
, y
), count
* 2, &written
);
421 mutex_unlock(&sisusb
->lock
);
424 /* Interface routine */
426 sisusbcon_clear(struct vc_data
*c
, int y
, int x
, int height
, int width
)
428 struct sisusb_usb_data
*sisusb
;
429 u16 eattr
= c
->vc_video_erase_char
;
434 if (width
<= 0 || height
<= 0)
437 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
440 /* sisusb->lock is down */
442 /* Need to clear buffer ourselves, because the vt does
443 * this AFTER calling us.
446 dest
= SISUSB_VADDR(x
, y
);
448 cols
= sisusb
->sisusb_num_columns
;
453 if (x
== 0 && width
>= c
->vc_cols
) {
455 sisusbcon_memsetw(dest
, eattr
, height
* cols
* 2);
459 for (i
= height
; i
> 0; i
--, dest
+= cols
)
460 sisusbcon_memsetw(dest
, eattr
, width
* 2);
464 if (sisusb_is_inactive(c
, sisusb
)) {
465 mutex_unlock(&sisusb
->lock
);
469 length
= ((height
* cols
) - x
- (cols
- width
- x
)) * 2;
472 sisusb_copy_memory(sisusb
, (unsigned char *)SISUSB_VADDR(x
, y
),
473 (long)SISUSB_HADDR(x
, y
), length
, &written
);
475 mutex_unlock(&sisusb
->lock
);
478 /* Interface routine */
480 sisusbcon_bmove(struct vc_data
*c
, int sy
, int sx
,
481 int dy
, int dx
, int height
, int width
)
483 struct sisusb_usb_data
*sisusb
;
487 if (width
<= 0 || height
<= 0)
490 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
493 /* sisusb->lock is down */
495 cols
= sisusb
->sisusb_num_columns
;
497 if (sisusb_is_inactive(c
, sisusb
)) {
498 mutex_unlock(&sisusb
->lock
);
502 length
= ((height
* cols
) - dx
- (cols
- width
- dx
)) * 2;
505 sisusb_copy_memory(sisusb
, (unsigned char *)SISUSB_VADDR(dx
, dy
),
506 (long)SISUSB_HADDR(dx
, dy
), length
, &written
);
508 mutex_unlock(&sisusb
->lock
);
511 /* interface routine */
513 sisusbcon_switch(struct vc_data
*c
)
515 struct sisusb_usb_data
*sisusb
;
519 /* Returnvalue 0 means we have fully restored screen,
520 * and vt doesn't need to call do_update_region().
521 * Returnvalue != 0 naturally means the opposite.
524 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
527 /* sisusb->lock is down */
529 /* Don't write to screen if in gfx mode */
530 if (sisusb_is_inactive(c
, sisusb
)) {
531 mutex_unlock(&sisusb
->lock
);
535 /* That really should not happen. It would mean we are
536 * being called while the vc is using its private buffer
539 if (c
->vc_origin
== (unsigned long)c
->vc_screenbuf
) {
540 mutex_unlock(&sisusb
->lock
);
541 dev_dbg(&sisusb
->sisusb_dev
->dev
, "ASSERT ORIGIN != SCREENBUF!\n");
545 /* Check that we don't copy too much */
546 length
= min((int)c
->vc_screenbuf_size
,
547 (int)(sisusb
->scrbuf
+ sisusb
->scrbuf_size
- c
->vc_origin
));
549 /* Restore the screen contents */
550 sisusbcon_memcpyw((u16
*)c
->vc_origin
, (u16
*)c
->vc_screenbuf
,
553 sisusb_copy_memory(sisusb
, (unsigned char *)c
->vc_origin
,
554 (long)SISUSB_HADDR(0, 0),
557 mutex_unlock(&sisusb
->lock
);
562 /* interface routine */
564 sisusbcon_save_screen(struct vc_data
*c
)
566 struct sisusb_usb_data
*sisusb
;
569 /* Save the current screen contents to vc's private
573 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
576 /* sisusb->lock is down */
578 if (sisusb_is_inactive(c
, sisusb
)) {
579 mutex_unlock(&sisusb
->lock
);
583 /* Check that we don't copy too much */
584 length
= min((int)c
->vc_screenbuf_size
,
585 (int)(sisusb
->scrbuf
+ sisusb
->scrbuf_size
- c
->vc_origin
));
587 /* Save the screen contents to vc's private buffer */
588 sisusbcon_memcpyw((u16
*)c
->vc_screenbuf
, (u16
*)c
->vc_origin
,
591 mutex_unlock(&sisusb
->lock
);
594 /* interface routine */
596 sisusbcon_set_palette(struct vc_data
*c
, unsigned char *table
)
598 struct sisusb_usb_data
*sisusb
;
601 /* Return value not used by vt */
603 if (!CON_IS_VISIBLE(c
))
606 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
609 /* sisusb->lock is down */
611 if (sisusb_is_inactive(c
, sisusb
)) {
612 mutex_unlock(&sisusb
->lock
);
616 for (i
= j
= 0; i
< 16; i
++) {
617 if (sisusb_setreg(sisusb
, SISCOLIDX
, table
[i
]))
619 if (sisusb_setreg(sisusb
, SISCOLDATA
, c
->vc_palette
[j
++] >> 2))
621 if (sisusb_setreg(sisusb
, SISCOLDATA
, c
->vc_palette
[j
++] >> 2))
623 if (sisusb_setreg(sisusb
, SISCOLDATA
, c
->vc_palette
[j
++] >> 2))
627 mutex_unlock(&sisusb
->lock
);
632 /* interface routine */
634 sisusbcon_blank(struct vc_data
*c
, int blank
, int mode_switch
)
636 struct sisusb_usb_data
*sisusb
;
637 u8 sr1
, cr17
, pmreg
, cr63
;
641 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
644 /* sisusb->lock is down */
647 sisusb
->is_gfx
= blank
? 1 : 0;
649 if (sisusb_is_inactive(c
, sisusb
)) {
650 mutex_unlock(&sisusb
->lock
);
656 case 1: /* Normal blanking: Clear screen */
658 sisusbcon_memsetw((u16
*)c
->vc_origin
,
659 c
->vc_video_erase_char
,
660 c
->vc_screenbuf_size
);
661 sisusb_copy_memory(sisusb
,
662 (unsigned char *)c
->vc_origin
,
663 (u32
)(sisusb
->vrambase
+
664 (c
->vc_origin
- sisusb
->scrbuf
)),
665 c
->vc_screenbuf_size
, &written
);
666 sisusb
->con_blanked
= 1;
670 default: /* VESA blanking */
672 case 0: /* Unblank */
678 sisusb
->con_blanked
= 0;
680 case VESA_VSYNC_SUSPEND
+ 1:
686 case VESA_HSYNC_SUSPEND
+ 1:
692 case VESA_POWERDOWN
+ 1:
699 mutex_unlock(&sisusb
->lock
);
703 sisusb_setidxregandor(sisusb
, SISSR
, 0x01, ~0x20, sr1
);
704 sisusb_setidxregandor(sisusb
, SISCR
, 0x17, 0x7f, cr17
);
705 sisusb_setidxregandor(sisusb
, SISSR
, 0x1f, 0x3f, pmreg
);
706 sisusb_setidxregandor(sisusb
, SISCR
, 0x63, 0xbf, cr63
);
710 mutex_unlock(&sisusb
->lock
);
715 /* interface routine */
717 sisusbcon_scrolldelta(struct vc_data
*c
, int lines
)
719 struct sisusb_usb_data
*sisusb
;
720 int margin
= c
->vc_size_row
* 4;
723 /* The return value does not seem to be used */
725 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
728 /* sisusb->lock is down */
730 if (sisusb_is_inactive(c
, sisusb
)) {
731 mutex_unlock(&sisusb
->lock
);
735 if (!lines
) /* Turn scrollback off */
736 c
->vc_visible_origin
= c
->vc_origin
;
739 if (sisusb
->con_rolled_over
>
740 (c
->vc_scr_end
- sisusb
->scrbuf
) + margin
) {
742 ul
= c
->vc_scr_end
- sisusb
->scrbuf
;
743 we
= sisusb
->con_rolled_over
+ c
->vc_size_row
;
748 we
= sisusb
->scrbuf_size
;
752 p
= (c
->vc_visible_origin
- sisusb
->scrbuf
- ul
+ we
) % we
+
753 lines
* c
->vc_size_row
;
755 st
= (c
->vc_origin
- sisusb
->scrbuf
- ul
+ we
) % we
;
766 c
->vc_visible_origin
= sisusb
->scrbuf
+ (p
+ ul
) % we
;
769 sisusbcon_set_start_address(sisusb
, c
);
771 mutex_unlock(&sisusb
->lock
);
776 /* Interface routine */
778 sisusbcon_cursor(struct vc_data
*c
, int mode
)
780 struct sisusb_usb_data
*sisusb
;
781 int from
, to
, baseline
;
783 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
786 /* sisusb->lock is down */
788 if (sisusb_is_inactive(c
, sisusb
)) {
789 mutex_unlock(&sisusb
->lock
);
793 if (c
->vc_origin
!= c
->vc_visible_origin
) {
794 c
->vc_visible_origin
= c
->vc_origin
;
795 sisusbcon_set_start_address(sisusb
, c
);
798 if (mode
== CM_ERASE
) {
799 sisusb_setidxregor(sisusb
, SISCR
, 0x0a, 0x20);
800 sisusb
->sisusb_cursor_size_to
= -1;
801 mutex_unlock(&sisusb
->lock
);
805 sisusb_set_cursor(sisusb
, (c
->vc_pos
- sisusb
->scrbuf
) / 2);
807 baseline
= c
->vc_font
.height
- (c
->vc_font
.height
< 10 ? 1 : 2);
809 switch (c
->vc_cursor_type
& 0x0f) {
810 case CUR_BLOCK
: from
= 1;
811 to
= c
->vc_font
.height
;
813 case CUR_TWO_THIRDS
: from
= c
->vc_font
.height
/ 3;
816 case CUR_LOWER_HALF
: from
= c
->vc_font
.height
/ 2;
819 case CUR_LOWER_THIRD
: from
= (c
->vc_font
.height
* 2) / 3;
822 case CUR_NONE
: from
= 31;
826 case CUR_UNDERLINE
: from
= baseline
- 1;
831 if (sisusb
->sisusb_cursor_size_from
!= from
||
832 sisusb
->sisusb_cursor_size_to
!= to
) {
834 sisusb_setidxreg(sisusb
, SISCR
, 0x0a, from
);
835 sisusb_setidxregandor(sisusb
, SISCR
, 0x0b, 0xe0, to
);
837 sisusb
->sisusb_cursor_size_from
= from
;
838 sisusb
->sisusb_cursor_size_to
= to
;
841 mutex_unlock(&sisusb
->lock
);
845 sisusbcon_scroll_area(struct vc_data
*c
, struct sisusb_usb_data
*sisusb
,
846 int t
, int b
, int dir
, int lines
)
848 int cols
= sisusb
->sisusb_num_columns
;
849 int length
= ((b
- t
) * cols
) * 2;
850 u16 eattr
= c
->vc_video_erase_char
;
853 /* sisusb->lock is down */
855 /* Scroll an area which does not match the
856 * visible screen's dimensions. This needs
857 * to be done separately, as it does not
858 * use hardware panning.
864 sisusbcon_memmovew(SISUSB_VADDR(0, t
),
865 SISUSB_VADDR(0, t
+ lines
),
866 (b
- t
- lines
) * cols
* 2);
867 sisusbcon_memsetw(SISUSB_VADDR(0, b
- lines
), eattr
,
872 sisusbcon_memmovew(SISUSB_VADDR(0, t
+ lines
),
874 (b
- t
- lines
) * cols
* 2);
875 sisusbcon_memsetw(SISUSB_VADDR(0, t
), eattr
,
880 sisusb_copy_memory(sisusb
, (char *)SISUSB_VADDR(0, t
),
881 (long)SISUSB_HADDR(0, t
), length
, &written
);
883 mutex_unlock(&sisusb
->lock
);
888 /* Interface routine */
890 sisusbcon_scroll(struct vc_data
*c
, int t
, int b
, int dir
, int lines
)
892 struct sisusb_usb_data
*sisusb
;
893 u16 eattr
= c
->vc_video_erase_char
;
896 unsigned long oldorigin
;
897 unsigned int delta
= lines
* c
->vc_size_row
;
900 /* Returning != 0 means we have done the scrolling successfully.
901 * Returning 0 makes vt do the scrolling on its own.
902 * Note that con_scroll is only called if the console is
903 * visible. In that case, the origin should be our buffer,
904 * not the vt's private one.
910 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
913 /* sisusb->lock is down */
915 if (sisusb_is_inactive(c
, sisusb
)) {
916 mutex_unlock(&sisusb
->lock
);
921 if (t
|| b
!= c
->vc_rows
)
922 return sisusbcon_scroll_area(c
, sisusb
, t
, b
, dir
, lines
);
924 if (c
->vc_origin
!= c
->vc_visible_origin
) {
925 c
->vc_visible_origin
= c
->vc_origin
;
926 sisusbcon_set_start_address(sisusb
, c
);
929 /* limit amount to maximum realistic size */
930 if (lines
> c
->vc_rows
)
933 oldorigin
= c
->vc_origin
;
939 if (c
->vc_scr_end
+ delta
>=
940 sisusb
->scrbuf
+ sisusb
->scrbuf_size
) {
941 sisusbcon_memcpyw((u16
*)sisusb
->scrbuf
,
942 (u16
*)(oldorigin
+ delta
),
943 c
->vc_screenbuf_size
- delta
);
944 c
->vc_origin
= sisusb
->scrbuf
;
945 sisusb
->con_rolled_over
= oldorigin
- sisusb
->scrbuf
;
948 c
->vc_origin
+= delta
;
951 (u16
*)(c
->vc_origin
+ c
->vc_screenbuf_size
- delta
),
958 if (oldorigin
- delta
< sisusb
->scrbuf
) {
959 sisusbcon_memmovew((u16
*)(sisusb
->scrbuf
+
960 sisusb
->scrbuf_size
-
961 c
->vc_screenbuf_size
+
964 c
->vc_screenbuf_size
- delta
);
965 c
->vc_origin
= sisusb
->scrbuf
+
966 sisusb
->scrbuf_size
-
967 c
->vc_screenbuf_size
;
968 sisusb
->con_rolled_over
= 0;
971 c
->vc_origin
-= delta
;
973 c
->vc_scr_end
= c
->vc_origin
+ c
->vc_screenbuf_size
;
975 scr_memsetw((u16
*)(c
->vc_origin
), eattr
, delta
);
980 originoffset
= (u32
)(c
->vc_origin
- sisusb
->scrbuf
);
983 sisusb_copy_memory(sisusb
,
984 (char *)c
->vc_origin
,
985 (u32
)(sisusb
->vrambase
+ originoffset
),
986 c
->vc_screenbuf_size
, &written
);
987 else if (dir
== SM_UP
)
988 sisusb_copy_memory(sisusb
,
989 (char *)c
->vc_origin
+ c
->vc_screenbuf_size
- delta
,
990 (u32
)sisusb
->vrambase
+ originoffset
+
991 c
->vc_screenbuf_size
- delta
,
994 sisusb_copy_memory(sisusb
,
995 (char *)c
->vc_origin
,
996 (u32
)(sisusb
->vrambase
+ originoffset
),
999 c
->vc_scr_end
= c
->vc_origin
+ c
->vc_screenbuf_size
;
1000 c
->vc_visible_origin
= c
->vc_origin
;
1002 sisusbcon_set_start_address(sisusb
, c
);
1004 c
->vc_pos
= c
->vc_pos
- oldorigin
+ c
->vc_origin
;
1006 mutex_unlock(&sisusb
->lock
);
1011 /* Interface routine */
1013 sisusbcon_set_origin(struct vc_data
*c
)
1015 struct sisusb_usb_data
*sisusb
;
1017 /* Returning != 0 means we were successful.
1018 * Returning 0 will vt make to use its own
1019 * screenbuffer as the origin.
1022 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1025 /* sisusb->lock is down */
1027 if (sisusb_is_inactive(c
, sisusb
) || sisusb
->con_blanked
) {
1028 mutex_unlock(&sisusb
->lock
);
1032 c
->vc_origin
= c
->vc_visible_origin
= sisusb
->scrbuf
;
1034 sisusbcon_set_start_address(sisusb
, c
);
1036 sisusb
->con_rolled_over
= 0;
1038 mutex_unlock(&sisusb
->lock
);
1043 /* Interface routine */
1045 sisusbcon_resize(struct vc_data
*c
, unsigned int newcols
, unsigned int newrows
,
1048 struct sisusb_usb_data
*sisusb
;
1051 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1054 fh
= sisusb
->current_font_height
;
1056 mutex_unlock(&sisusb
->lock
);
1058 /* We are quite unflexible as regards resizing. The vt code
1059 * handles sizes where the line length isn't equal the pitch
1060 * quite badly. As regards the rows, our panning tricks only
1061 * work well if the number of rows equals the visible number
1065 if (newcols
!= 80 || c
->vc_scan_lines
/ fh
!= newrows
)
1072 sisusbcon_do_font_op(struct sisusb_usb_data
*sisusb
, int set
, int slot
,
1073 u8
*arg
, int cmapsz
, int ch512
, int dorecalc
,
1074 struct vc_data
*c
, int fh
, int uplock
)
1076 int font_select
= 0x00, i
, err
= 0;
1080 /* sisusb->lock is down */
1083 * The default font is kept in slot 0.
1084 * A user font is loaded in slot 2 (256 ch)
1088 if ((slot
!= 0 && slot
!= 2) || !fh
) {
1090 mutex_unlock(&sisusb
->lock
);
1095 sisusb
->font_slot
= slot
;
1097 /* Default font is always 256 */
1101 offset
= 4 * cmapsz
;
1103 font_select
= (slot
== 0) ? 0x00 : (ch512
? 0x0e : 0x0a);
1105 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x01); /* Reset */
1106 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x02, 0x04); /* Write to plane 2 */
1107 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x04, 0x07); /* Memory mode a0-bf */
1108 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x03); /* Reset */
1113 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x04, 0x03); /* Select plane read 2 */
1114 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x05, 0x00); /* Disable odd/even */
1115 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x06, 0x00); /* Address range a0-bf */
1122 for (i
= 0; i
< cmapsz
; i
++) {
1123 err
|= sisusb_writeb(sisusb
,
1124 sisusb
->vrambase
+ offset
+ i
,
1130 for (i
= 0; i
< cmapsz
; i
++) {
1131 err
|= sisusb_readb(sisusb
,
1132 sisusb
->vrambase
+ offset
+ i
,
1139 * In 512-character mode, the character map is not contiguous if
1140 * we want to remain EGA compatible -- which we do
1145 for (i
= 0; i
< cmapsz
; i
++) {
1146 err
|= sisusb_writeb(sisusb
,
1147 sisusb
->vrambase
+ offset
+
1154 for (i
= 0; i
< cmapsz
; i
++) {
1155 err
|= sisusb_readb(sisusb
,
1156 sisusb
->vrambase
+ offset
+
1168 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x01); /* Reset */
1169 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x02, 0x03); /* Write to planes 0+1 */
1170 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x04, 0x03); /* Memory mode a0-bf */
1172 sisusb_setidxreg(sisusb
, SISSR
, 0x03, font_select
);
1173 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x03); /* Reset end */
1178 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x04, 0x00); /* Select plane read 0 */
1179 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x05, 0x10); /* Enable odd/even */
1180 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x06, 0x06); /* Address range b8-bf */
1185 if ((set
) && (ch512
!= sisusb
->current_font_512
)) {
1187 /* Font is shared among all our consoles.
1188 * And so is the hi_font_mask.
1190 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++) {
1191 struct vc_data
*c
= vc_cons
[i
].d
;
1192 if (c
&& c
->vc_sw
== &sisusb_con
)
1193 c
->vc_hi_font_mask
= ch512
? 0x0800 : 0;
1196 sisusb
->current_font_512
= ch512
;
1198 /* color plane enable register:
1199 256-char: enable intensity bit
1200 512-char: disable intensity bit */
1201 sisusb_getreg(sisusb
, SISINPSTAT
, &dummy
);
1202 sisusb_setreg(sisusb
, SISAR
, 0x12);
1203 sisusb_setreg(sisusb
, SISAR
, ch512
? 0x07 : 0x0f);
1205 sisusb_getreg(sisusb
, SISINPSTAT
, &dummy
);
1206 sisusb_setreg(sisusb
, SISAR
, 0x20);
1207 sisusb_getreg(sisusb
, SISINPSTAT
, &dummy
);
1213 * Adjust the screen to fit a font of a certain height
1216 unsigned char ovr
, vde
, fsr
;
1217 int rows
= 0, maxscan
= 0;
1221 /* Number of video rows */
1222 rows
= c
->vc_scan_lines
/ fh
;
1223 /* Scan lines to actually display-1 */
1224 maxscan
= rows
* fh
- 1;
1226 /*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n",
1227 rows, maxscan, fh, c->vc_scan_lines);*/
1229 sisusb_getidxreg(sisusb
, SISCR
, 0x07, &ovr
);
1230 vde
= maxscan
& 0xff;
1231 ovr
= (ovr
& 0xbd) |
1232 ((maxscan
& 0x100) >> 7) |
1233 ((maxscan
& 0x200) >> 3);
1234 sisusb_setidxreg(sisusb
, SISCR
, 0x07, ovr
);
1235 sisusb_setidxreg(sisusb
, SISCR
, 0x12, vde
);
1239 sisusb_getidxreg(sisusb
, SISCR
, 0x09, &fsr
);
1240 fsr
= (fsr
& 0xe0) | (fh
- 1);
1241 sisusb_setidxreg(sisusb
, SISCR
, 0x09, fsr
);
1242 sisusb
->current_font_height
= fh
;
1244 sisusb
->sisusb_cursor_size_from
= -1;
1245 sisusb
->sisusb_cursor_size_to
= -1;
1250 mutex_unlock(&sisusb
->lock
);
1252 if (dorecalc
&& c
) {
1253 int i
, rows
= c
->vc_scan_lines
/ fh
;
1255 /* Now adjust our consoles' size */
1257 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++) {
1258 struct vc_data
*vc
= vc_cons
[i
].d
;
1260 if (vc
&& vc
->vc_sw
== &sisusb_con
) {
1261 if (CON_IS_VISIBLE(vc
)) {
1262 vc
->vc_sw
->con_cursor(vc
, CM_DRAW
);
1264 vc
->vc_font
.height
= fh
;
1265 vc_resize(vc
, 0, rows
);
1274 mutex_unlock(&sisusb
->lock
);
1279 /* Interface routine */
1281 sisusbcon_font_set(struct vc_data
*c
, struct console_font
*font
,
1284 struct sisusb_usb_data
*sisusb
;
1285 unsigned charcount
= font
->charcount
;
1287 if (font
->width
!= 8 || (charcount
!= 256 && charcount
!= 512))
1290 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1293 /* sisusb->lock is down */
1295 /* Save the user-provided font into a buffer. This
1296 * is used for restoring text mode after quitting
1297 * from X and for the con_getfont routine.
1299 if (sisusb
->font_backup
) {
1300 if (sisusb
->font_backup_size
< charcount
) {
1301 vfree(sisusb
->font_backup
);
1302 sisusb
->font_backup
= NULL
;
1306 if (!sisusb
->font_backup
)
1307 sisusb
->font_backup
= vmalloc(charcount
* 32);
1309 if (sisusb
->font_backup
) {
1310 memcpy(sisusb
->font_backup
, font
->data
, charcount
* 32);
1311 sisusb
->font_backup_size
= charcount
;
1312 sisusb
->font_backup_height
= font
->height
;
1313 sisusb
->font_backup_512
= (charcount
== 512) ? 1 : 0;
1316 /* do_font_op ups sisusb->lock */
1318 return sisusbcon_do_font_op(sisusb
, 1, 2, font
->data
,
1319 8192, (charcount
== 512),
1320 (!(flags
& KD_FONT_FLAG_DONT_RECALC
)) ? 1 : 0,
1321 c
, font
->height
, 1);
1324 /* Interface routine */
1326 sisusbcon_font_get(struct vc_data
*c
, struct console_font
*font
)
1328 struct sisusb_usb_data
*sisusb
;
1330 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1333 /* sisusb->lock is down */
1336 font
->height
= c
->vc_font
.height
;
1337 font
->charcount
= 256;
1340 mutex_unlock(&sisusb
->lock
);
1344 if (!sisusb
->font_backup
) {
1345 mutex_unlock(&sisusb
->lock
);
1349 /* Copy 256 chars only, like vgacon */
1350 memcpy(font
->data
, sisusb
->font_backup
, 256 * 32);
1352 mutex_unlock(&sisusb
->lock
);
1358 * The console `switch' structure for the sisusb console
1361 static const struct consw sisusb_con
= {
1362 .owner
= THIS_MODULE
,
1363 .con_startup
= sisusbcon_startup
,
1364 .con_init
= sisusbcon_init
,
1365 .con_deinit
= sisusbcon_deinit
,
1366 .con_clear
= sisusbcon_clear
,
1367 .con_putc
= sisusbcon_putc
,
1368 .con_putcs
= sisusbcon_putcs
,
1369 .con_cursor
= sisusbcon_cursor
,
1370 .con_scroll
= sisusbcon_scroll
,
1371 .con_bmove
= sisusbcon_bmove
,
1372 .con_switch
= sisusbcon_switch
,
1373 .con_blank
= sisusbcon_blank
,
1374 .con_font_set
= sisusbcon_font_set
,
1375 .con_font_get
= sisusbcon_font_get
,
1376 .con_set_palette
= sisusbcon_set_palette
,
1377 .con_scrolldelta
= sisusbcon_scrolldelta
,
1378 .con_build_attr
= sisusbcon_build_attr
,
1379 .con_invert_region
= sisusbcon_invert_region
,
1380 .con_set_origin
= sisusbcon_set_origin
,
1381 .con_save_screen
= sisusbcon_save_screen
,
1382 .con_resize
= sisusbcon_resize
,
1385 /* Our very own dummy console driver */
1387 static const char *sisusbdummycon_startup(void)
1389 return "SISUSBVGADUMMY";
1392 static void sisusbdummycon_init(struct vc_data
*vc
, int init
)
1394 vc
->vc_can_do_color
= 1;
1399 vc_resize(vc
, 80, 25);
1402 static int sisusbdummycon_dummy(void)
1407 #define SISUSBCONDUMMY (void *)sisusbdummycon_dummy
1409 static const struct consw sisusb_dummy_con
= {
1410 .owner
= THIS_MODULE
,
1411 .con_startup
= sisusbdummycon_startup
,
1412 .con_init
= sisusbdummycon_init
,
1413 .con_deinit
= SISUSBCONDUMMY
,
1414 .con_clear
= SISUSBCONDUMMY
,
1415 .con_putc
= SISUSBCONDUMMY
,
1416 .con_putcs
= SISUSBCONDUMMY
,
1417 .con_cursor
= SISUSBCONDUMMY
,
1418 .con_scroll
= SISUSBCONDUMMY
,
1419 .con_bmove
= SISUSBCONDUMMY
,
1420 .con_switch
= SISUSBCONDUMMY
,
1421 .con_blank
= SISUSBCONDUMMY
,
1422 .con_font_set
= SISUSBCONDUMMY
,
1423 .con_font_get
= SISUSBCONDUMMY
,
1424 .con_font_default
= SISUSBCONDUMMY
,
1425 .con_font_copy
= SISUSBCONDUMMY
,
1426 .con_set_palette
= SISUSBCONDUMMY
,
1427 .con_scrolldelta
= SISUSBCONDUMMY
,
1431 sisusb_console_init(struct sisusb_usb_data
*sisusb
, int first
, int last
)
1435 mutex_lock(&sisusb
->lock
);
1437 /* Erm.. that should not happen */
1438 if (sisusb
->haveconsole
|| !sisusb
->SiS_Pr
) {
1439 mutex_unlock(&sisusb
->lock
);
1443 sisusb
->con_first
= first
;
1444 sisusb
->con_last
= last
;
1447 first
> MAX_NR_CONSOLES
||
1448 last
> MAX_NR_CONSOLES
) {
1449 mutex_unlock(&sisusb
->lock
);
1453 /* If gfxcore not initialized or no consoles given, quit graciously */
1454 if (!sisusb
->gfxinit
|| first
< 1 || last
< 1) {
1455 mutex_unlock(&sisusb
->lock
);
1459 sisusb
->sisusb_cursor_loc
= -1;
1460 sisusb
->sisusb_cursor_size_from
= -1;
1461 sisusb
->sisusb_cursor_size_to
= -1;
1463 /* Set up text mode (and upload default font) */
1464 if (sisusb_reset_text_mode(sisusb
, 1)) {
1465 mutex_unlock(&sisusb
->lock
);
1466 dev_err(&sisusb
->sisusb_dev
->dev
, "Failed to set up text mode\n");
1470 /* Initialize some gfx registers */
1471 sisusb_initialize(sisusb
);
1473 for (i
= first
- 1; i
<= last
- 1; i
++) {
1474 /* Save sisusb for our interface routines */
1475 mysisusbs
[i
] = sisusb
;
1478 /* Initial console setup */
1479 sisusb
->sisusb_num_columns
= 80;
1481 /* Use a 32K buffer (matches b8000-bffff area) */
1482 sisusb
->scrbuf_size
= 32 * 1024;
1484 /* Allocate screen buffer */
1485 if (!(sisusb
->scrbuf
= (unsigned long)vmalloc(sisusb
->scrbuf_size
))) {
1486 mutex_unlock(&sisusb
->lock
);
1487 dev_err(&sisusb
->sisusb_dev
->dev
, "Failed to allocate screen buffer\n");
1491 mutex_unlock(&sisusb
->lock
);
1493 /* Now grab the desired console(s) */
1494 ret
= take_over_console(&sisusb_con
, first
- 1, last
- 1, 0);
1497 sisusb
->haveconsole
= 1;
1499 for (i
= first
- 1; i
<= last
- 1; i
++)
1500 mysisusbs
[i
] = NULL
;
1507 sisusb_console_exit(struct sisusb_usb_data
*sisusb
)
1511 /* This is called if the device is disconnected
1512 * and while disconnect and lock semaphores
1513 * are up. This should be save because we
1514 * can't lose our sisusb any other way but by
1515 * disconnection (and hence, the disconnect
1516 * sema is for protecting all other access
1517 * functions from disconnection, not the
1521 /* Now what do we do in case of disconnection:
1522 * One alternative would be to simply call
1523 * give_up_console(). Nah, not a good idea.
1524 * give_up_console() is obviously buggy as it
1525 * only discards the consw pointer from the
1526 * driver_map, but doesn't adapt vc->vc_sw
1527 * of the affected consoles. Hence, the next
1528 * call to any of the console functions will
1529 * eventually take a trip to oops county.
1530 * Also, give_up_console for some reason
1531 * doesn't decrement our module refcount.
1532 * Instead, we switch our consoles to a private
1533 * dummy console. This, of course, keeps our
1534 * refcount up as well, but it works perfectly.
1537 if (sisusb
->haveconsole
) {
1538 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++)
1539 if (sisusb
->havethisconsole
[i
])
1540 take_over_console(&sisusb_dummy_con
, i
, i
, 0);
1541 /* At this point, con_deinit for all our
1542 * consoles is executed by take_over_console().
1544 sisusb
->haveconsole
= 0;
1547 vfree((void *)sisusb
->scrbuf
);
1550 vfree(sisusb
->font_backup
);
1551 sisusb
->font_backup
= NULL
;
1554 void __init
sisusb_init_concode(void)
1558 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++)
1559 mysisusbs
[i
] = NULL
;
1562 #endif /* INCL_CON */