?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Char: mxser, ratelimit ioctl warning
[linux-2.6/mini2440.git] / drivers / net / sun3lance.c
blob359452a06c67d7160e444ee3ab893afec2747f6d
1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
2 /*
3
4 Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5 This driver is a part of the linux kernel, and is thus distributed
6 under the GNU General Public License.
7
8 The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9 true for the correct IRQ and address of the lance registers. They
10 have not been widely tested, however. What we probably need is a
11 "proper" way to search for a device in the sun3's prom, but, alas,
12 linux has no such thing.
13
14 This driver is largely based on atarilance.c, by Roman Hodek. Other
15 sources of inspiration were the NetBSD sun3 am7990 driver, and the
16 linux sparc lance driver (sunlance.c).
17
18 There are more assumptions made throughout this driver, it almost
19 certainly still needs work, but it does work at least for RARP/BOOTP and
20 mounting the root NFS filesystem.
21
22 */
23
24 static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
25
26 #include <linux/module.h>
27 #include <linux/stddef.h>
28 #include <linux/kernel.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/bitops.h>
40
41 #include <asm/cacheflush.h>
42 #include <asm/setup.h>
43 #include <asm/irq.h>
44 #include <asm/io.h>
45 #include <asm/pgtable.h>
46 #include <asm/dvma.h>
47 #include <asm/idprom.h>
48 #include <asm/machines.h>
49
50 #ifdef CONFIG_SUN3
51 #include <asm/sun3mmu.h>
52 #else
53 #include <asm/sun3xprom.h>
54 #endif
55
56 /* sun3/60 addr/irq for the lance chip. If your sun is different,
57 change this. */
58 #define LANCE_OBIO 0x120000
59 #define LANCE_IRQ IRQ_AUTO_3
60
61 /* Debug level:
62 * 0 = silent, print only serious errors
63 * 1 = normal, print error messages
64 * 2 = debug, print debug infos
65 * 3 = debug, print even more debug infos (packet data)
66 */
67
68 #define LANCE_DEBUG 0
69
70 #ifdef LANCE_DEBUG
71 static int lance_debug = LANCE_DEBUG;
72 #else
73 static int lance_debug = 1;
74 #endif
75 module_param(lance_debug, int, 0);
76 MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
77 MODULE_LICENSE("GPL");
78
79 #define DPRINTK(n,a) \
80 do { \
81 if (lance_debug >= n) \
82 printk a; \
83 } while( 0 )
84
85
86 /* we're only using 32k of memory, so we use 4 TX
87 buffers and 16 RX buffers. These values are expressed as log2. */
88
89 #define TX_LOG_RING_SIZE 3
90 #define RX_LOG_RING_SIZE 5
91
92 /* These are the derived values */
93
94 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
95 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
96 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
97
98 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
99 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
100 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
101
102 /* Definitions for packet buffer access: */
103 #define PKT_BUF_SZ 1544
104
105 /* Get the address of a packet buffer corresponding to a given buffer head */
106 #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
107
108
109 /* The LANCE Rx and Tx ring descriptors. */
110 struct lance_rx_head {
111 unsigned short base; /* Low word of base addr */
112 volatile unsigned char flag;
113 unsigned char base_hi; /* High word of base addr (unused) */
114 short buf_length; /* This length is 2s complement! */
115 volatile short msg_length; /* This length is "normal". */
116 };
117
118 struct lance_tx_head {
119 unsigned short base; /* Low word of base addr */
120 volatile unsigned char flag;
121 unsigned char base_hi; /* High word of base addr (unused) */
122 short length; /* Length is 2s complement! */
123 volatile short misc;
124 };
125
126 /* The LANCE initialization block, described in databook. */
127 struct lance_init_block {
128 unsigned short mode; /* Pre-set mode */
129 unsigned char hwaddr[6]; /* Physical ethernet address */
130 unsigned int filter[2]; /* Multicast filter (unused). */
131 /* Receive and transmit ring base, along with length bits. */
132 unsigned short rdra;
133 unsigned short rlen;
134 unsigned short tdra;
135 unsigned short tlen;
136 unsigned short pad[4]; /* is thie needed? */
137 };
138
139 /* The whole layout of the Lance shared memory */
140 struct lance_memory {
141 struct lance_init_block init;
142 struct lance_tx_head tx_head[TX_RING_SIZE];
143 struct lance_rx_head rx_head[RX_RING_SIZE];
144 char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
145 char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
146 };
147
148 /* The driver's private device structure */
149
150 struct lance_private {
151 volatile unsigned short *iobase;
152 struct lance_memory *mem;
153 int new_rx, new_tx; /* The next free ring entry */
154 int old_tx, old_rx; /* ring entry to be processed */
155 /* These two must be longs for set_bit() */
156 long tx_full;
157 long lock;
158 };
159
160 /* I/O register access macros */
161
162 #define MEM lp->mem
163 #define DREG lp->iobase[0]
164 #define AREG lp->iobase[1]
165 #define REGA(a) (*( AREG = (a), &DREG ))
166
167 /* Definitions for the Lance */
168
169 /* tx_head flags */
170 #define TMD1_ENP 0x01 /* end of packet */
171 #define TMD1_STP 0x02 /* start of packet */
172 #define TMD1_DEF 0x04 /* deferred */
173 #define TMD1_ONE 0x08 /* one retry needed */
174 #define TMD1_MORE 0x10 /* more than one retry needed */
175 #define TMD1_ERR 0x40 /* error summary */
176 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
177
178 #define TMD1_OWN_CHIP TMD1_OWN
179 #define TMD1_OWN_HOST 0
180
181 /* tx_head misc field */
182 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
183 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
184 #define TMD3_LCAR 0x0800 /* carrier lost */
185 #define TMD3_LCOL 0x1000 /* late collision */
186 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
187 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
188
189 /* rx_head flags */
190 #define RMD1_ENP 0x01 /* end of packet */
191 #define RMD1_STP 0x02 /* start of packet */
192 #define RMD1_BUFF 0x04 /* buffer error */
193 #define RMD1_CRC 0x08 /* CRC error */
194 #define RMD1_OFLO 0x10 /* overflow */
195 #define RMD1_FRAM 0x20 /* framing error */
196 #define RMD1_ERR 0x40 /* error summary */
197 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
198
199 #define RMD1_OWN_CHIP RMD1_OWN
200 #define RMD1_OWN_HOST 0
201
202 /* register names */
203 #define CSR0 0 /* mode/status */
204 #define CSR1 1 /* init block addr (low) */
205 #define CSR2 2 /* init block addr (high) */
206 #define CSR3 3 /* misc */
207 #define CSR8 8 /* address filter */
208 #define CSR15 15 /* promiscuous mode */
209
210 /* CSR0 */
211 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
212 #define CSR0_INIT 0x0001 /* initialize (RS) */
213 #define CSR0_STRT 0x0002 /* start (RS) */
214 #define CSR0_STOP 0x0004 /* stop (RS) */
215 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
216 #define CSR0_TXON 0x0010 /* transmitter on (R) */
217 #define CSR0_RXON 0x0020 /* receiver on (R) */
218 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
219 #define CSR0_INTR 0x0080 /* interrupt active (R) */
220 #define CSR0_IDON 0x0100 /* initialization done (RC) */
221 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
222 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
223 #define CSR0_MERR 0x0800 /* memory error (RC) */
224 #define CSR0_MISS 0x1000 /* missed frame (RC) */
225 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
226 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
227 #define CSR0_ERR 0x8000 /* error (RC) */
228
229 /* CSR3 */
230 #define CSR3_BCON 0x0001 /* byte control */
231 #define CSR3_ACON 0x0002 /* ALE control */
232 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
233
234 /***************************** Prototypes *****************************/
235
236 static int lance_probe( struct net_device *dev);
237 static int lance_open( struct net_device *dev );
238 static void lance_init_ring( struct net_device *dev );
239 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
240 static irqreturn_t lance_interrupt( int irq, void *dev_id);
241 static int lance_rx( struct net_device *dev );
242 static int lance_close( struct net_device *dev );
243 static void set_multicast_list( struct net_device *dev );
244
245 /************************* End of Prototypes **************************/
246
247 struct net_device * __init sun3lance_probe(int unit)
248 {
249 struct net_device *dev;
250 static int found;
251 int err = -ENODEV;
252
253 if (!MACH_IS_SUN3 && !MACH_IS_SUN3X)
254 return ERR_PTR(-ENODEV);
255
256 /* check that this machine has an onboard lance */
257 switch(idprom->id_machtype) {
258 case SM_SUN3|SM_3_50:
259 case SM_SUN3|SM_3_60:
260 case SM_SUN3X|SM_3_80:
261 /* these machines have lance */
262 break;
263
264 default:
265 return ERR_PTR(-ENODEV);
266 }
267
268 if (found)
269 return ERR_PTR(-ENODEV);
270
271 dev = alloc_etherdev(sizeof(struct lance_private));
272 if (!dev)
273 return ERR_PTR(-ENOMEM);
274 if (unit >= 0) {
275 sprintf(dev->name, "eth%d", unit);
276 netdev_boot_setup_check(dev);
277 }
278
279 if (!lance_probe(dev))
280 goto out;
281
282 err = register_netdev(dev);
283 if (err)
284 goto out1;
285 found = 1;
286 return dev;
287
288 out1:
289 #ifdef CONFIG_SUN3
290 iounmap((void __iomem *)dev->base_addr);
291 #endif
292 out:
293 free_netdev(dev);
294 return ERR_PTR(err);
295 }
296
297 static int __init lance_probe( struct net_device *dev)
298 {
299 unsigned long ioaddr;
300
301 struct lance_private *lp;
302 int i;
303 static int did_version;
304 volatile unsigned short *ioaddr_probe;
305 unsigned short tmp1, tmp2;
306 DECLARE_MAC_BUF(mac);
307
308 #ifdef CONFIG_SUN3
309 ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
310 if (!ioaddr)
311 return 0;
312 #else
313 ioaddr = SUN3X_LANCE;
314 #endif
315
316 /* test to see if there's really a lance here */
317 /* (CSRO_INIT shouldn't be readable) */
318
319 ioaddr_probe = (volatile unsigned short *)ioaddr;
320 tmp1 = ioaddr_probe[0];
321 tmp2 = ioaddr_probe[1];
322
323 ioaddr_probe[1] = CSR0;
324 ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
325
326 if(ioaddr_probe[0] != CSR0_STOP) {
327 ioaddr_probe[0] = tmp1;
328 ioaddr_probe[1] = tmp2;
329
330 #ifdef CONFIG_SUN3
331 iounmap((void __iomem *)ioaddr);
332 #endif
333 return 0;
334 }
335
336 lp = netdev_priv(dev);
337
338 /* XXX - leak? */
339 MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
340 if (MEM == NULL) {
341 #ifdef CONFIG_SUN3
342 iounmap((void __iomem *)ioaddr);
343 #endif
344 printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
345 return 0;
346 }
347
348 lp->iobase = (volatile unsigned short *)ioaddr;
349 dev->base_addr = (unsigned long)ioaddr; /* informational only */
350
351 REGA(CSR0) = CSR0_STOP;
352
353 if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) {
354 #ifdef CONFIG_SUN3
355 iounmap((void __iomem *)ioaddr);
356 #endif
357 dvma_free((void *)MEM);
358 printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
359 return 0;
360 }
361 dev->irq = (unsigned short)LANCE_IRQ;
362
363
364 printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
365 dev->name,
366 (unsigned long)ioaddr,
367 (unsigned long)MEM,
368 dev->irq);
369
370 /* copy in the ethernet address from the prom */
371 for(i = 0; i < 6 ; i++)
372 dev->dev_addr[i] = idprom->id_ethaddr[i];
373
374 /* tell the card it's ether address, bytes swapped */
375 MEM->init.hwaddr[0] = dev->dev_addr[1];
376 MEM->init.hwaddr[1] = dev->dev_addr[0];
377 MEM->init.hwaddr[2] = dev->dev_addr[3];
378 MEM->init.hwaddr[3] = dev->dev_addr[2];
379 MEM->init.hwaddr[4] = dev->dev_addr[5];
380 MEM->init.hwaddr[5] = dev->dev_addr[4];
381
382 printk("%s\n", print_mac(mac, dev->dev_addr));
383
384 MEM->init.mode = 0x0000;
385 MEM->init.filter[0] = 0x00000000;
386 MEM->init.filter[1] = 0x00000000;
387 MEM->init.rdra = dvma_vtob(MEM->rx_head);
388 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
389 (dvma_vtob(MEM->rx_head) >> 16);
390 MEM->init.tdra = dvma_vtob(MEM->tx_head);
391 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
392 (dvma_vtob(MEM->tx_head) >> 16);
393
394 DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
395 dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
396 (dvma_vtob(MEM->tx_head))));
397
398 if (did_version++ == 0)
399 printk( version );
400
401 /* The LANCE-specific entries in the device structure. */
402 dev->open = &lance_open;
403 dev->hard_start_xmit = &lance_start_xmit;
404 dev->stop = &lance_close;
405 dev->set_multicast_list = &set_multicast_list;
406 dev->set_mac_address = NULL;
407 // KLUDGE -- REMOVE ME
408 set_bit(__LINK_STATE_PRESENT, &dev->state);
409
410
411 return 1;
412 }
413
414 static int lance_open( struct net_device *dev )
415 {
416 struct lance_private *lp = netdev_priv(dev);
417 int i;
418
419 DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
420
421 REGA(CSR0) = CSR0_STOP;
422
423 lance_init_ring(dev);
424
425 /* From now on, AREG is kept to point to CSR0 */
426 REGA(CSR0) = CSR0_INIT;
427
428 i = 1000000;
429 while (--i > 0)
430 if (DREG & CSR0_IDON)
431 break;
432 if (i < 0 || (DREG & CSR0_ERR)) {
433 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
434 dev->name, i, DREG ));
435 DREG = CSR0_STOP;
436 return( -EIO );
437 }
438
439 DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
440
441 netif_start_queue(dev);
442
443 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
444
445 return( 0 );
446 }
447
448
449 /* Initialize the LANCE Rx and Tx rings. */
450
451 static void lance_init_ring( struct net_device *dev )
452 {
453 struct lance_private *lp = netdev_priv(dev);
454 int i;
455
456 lp->lock = 0;
457 lp->tx_full = 0;
458 lp->new_rx = lp->new_tx = 0;
459 lp->old_rx = lp->old_tx = 0;
460
461 for( i = 0; i < TX_RING_SIZE; i++ ) {
462 MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
463 MEM->tx_head[i].flag = 0;
464 MEM->tx_head[i].base_hi =
465 (dvma_vtob(MEM->tx_data[i])) >>16;
466 MEM->tx_head[i].length = 0;
467 MEM->tx_head[i].misc = 0;
468 }
469
470 for( i = 0; i < RX_RING_SIZE; i++ ) {
471 MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
472 MEM->rx_head[i].flag = RMD1_OWN_CHIP;
473 MEM->rx_head[i].base_hi =
474 (dvma_vtob(MEM->rx_data[i])) >> 16;
475 MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
476 MEM->rx_head[i].msg_length = 0;
477 }
478
479 /* tell the card it's ether address, bytes swapped */
480 MEM->init.hwaddr[0] = dev->dev_addr[1];
481 MEM->init.hwaddr[1] = dev->dev_addr[0];
482 MEM->init.hwaddr[2] = dev->dev_addr[3];
483 MEM->init.hwaddr[3] = dev->dev_addr[2];
484 MEM->init.hwaddr[4] = dev->dev_addr[5];
485 MEM->init.hwaddr[5] = dev->dev_addr[4];
486
487 MEM->init.mode = 0x0000;
488 MEM->init.filter[0] = 0x00000000;
489 MEM->init.filter[1] = 0x00000000;
490 MEM->init.rdra = dvma_vtob(MEM->rx_head);
491 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
492 (dvma_vtob(MEM->rx_head) >> 16);
493 MEM->init.tdra = dvma_vtob(MEM->tx_head);
494 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
495 (dvma_vtob(MEM->tx_head) >> 16);
496
497
498 /* tell the lance the address of its init block */
499 REGA(CSR1) = dvma_vtob(&(MEM->init));
500 REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
501
502 #ifdef CONFIG_SUN3X
503 REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
504 #else
505 REGA(CSR3) = CSR3_BSWP;
506 #endif
507
508 }
509
510
511 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
512 {
513 struct lance_private *lp = netdev_priv(dev);
514 int entry, len;
515 struct lance_tx_head *head;
516 unsigned long flags;
517
518 DPRINTK( 1, ( "%s: transmit start.\n",
519 dev->name));
520
521 /* Transmitter timeout, serious problems. */
522 if (netif_queue_stopped(dev)) {
523 int tickssofar = jiffies - dev->trans_start;
524 if (tickssofar < 20)
525 return( 1 );
526
527 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
528 dev->name, DREG ));
529 DREG = CSR0_STOP;
530 /*
531 * Always set BSWP after a STOP as STOP puts it back into
532 * little endian mode.
533 */
534 REGA(CSR3) = CSR3_BSWP;
535 dev->stats.tx_errors++;
536
537 if(lance_debug >= 2) {
538 int i;
539 printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
540 lp->old_tx, lp->new_tx,
541 lp->tx_full ? " (full)" : "",
542 lp->new_rx );
543 for( i = 0 ; i < RX_RING_SIZE; i++ )
544 printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
545 i, MEM->rx_head[i].base,
546 -MEM->rx_head[i].buf_length,
547 MEM->rx_head[i].msg_length);
548 for( i = 0 ; i < TX_RING_SIZE; i++ )
549 printk("tx #%d: base=%04x len=%04x misc=%04x\n",
550 i, MEM->tx_head[i].base,
551 -MEM->tx_head[i].length,
552 MEM->tx_head[i].misc );
553 }
554
555 lance_init_ring(dev);
556 REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
557
558 netif_start_queue(dev);
559 dev->trans_start = jiffies;
560
561 return 0;
562 }
563
564
565 /* Block a timer-based transmit from overlapping. This could better be
566 done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
567
568 /* Block a timer-based transmit from overlapping with us by
569 stopping the queue for a bit... */
570
571 netif_stop_queue(dev);
572
573 if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
574 printk( "%s: tx queue lock!.\n", dev->name);
575 /* don't clear dev->tbusy flag. */
576 return 1;
577 }
578
579 AREG = CSR0;
580 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
581 dev->name, DREG ));
582
583 #ifdef CONFIG_SUN3X
584 /* this weirdness doesn't appear on sun3... */
585 if(!(DREG & CSR0_INIT)) {
586 DPRINTK( 1, ("INIT not set, reinitializing...\n"));
587 REGA( CSR0 ) = CSR0_STOP;
588 lance_init_ring(dev);
589 REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
590 }
591 #endif
592
593 /* Fill in a Tx ring entry */
594 #if 0
595 if (lance_debug >= 2) {
596 printk( "%s: TX pkt %d type 0x%04x"
597 " from %s to %s"
598 " data at 0x%08x len %d\n",
599 dev->name, lp->new_tx, ((u_short *)skb->data)[6],
600 DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data),
601 (int)skb->data, (int)skb->len );
602 }
603 #endif
604 /* We're not prepared for the int until the last flags are set/reset.
605 * And the int may happen already after setting the OWN_CHIP... */
606 local_irq_save(flags);
607
608 /* Mask to ring buffer boundary. */
609 entry = lp->new_tx;
610 head = &(MEM->tx_head[entry]);
611
612 /* Caution: the write order is important here, set the "ownership" bits
613 * last.
614 */
615
616 /* the sun3's lance needs it's buffer padded to the minimum
617 size */
618 len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
619
620 // head->length = -len;
621 head->length = (-len) | 0xf000;
622 head->misc = 0;
623
624 skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len);
625 if (len != skb->len)
626 memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
627
628 head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
629 lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
630 dev->stats.tx_bytes += skb->len;
631
632 /* Trigger an immediate send poll. */
633 REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
634 AREG = CSR0;
635 DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
636 dev->name, DREG ));
637 dev->trans_start = jiffies;
638 dev_kfree_skb( skb );
639
640 lp->lock = 0;
641 if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
642 TMD1_OWN_HOST)
643 netif_start_queue(dev);
644
645 local_irq_restore(flags);
646
647 return 0;
648 }
649
650 /* The LANCE interrupt handler. */
651
652 static irqreturn_t lance_interrupt( int irq, void *dev_id)
653 {
654 struct net_device *dev = dev_id;
655 struct lance_private *lp = netdev_priv(dev);
656 int csr0;
657 static int in_interrupt;
658
659 if (dev == NULL) {
660 DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
661 return IRQ_NONE;
662 }
663
664 if (in_interrupt)
665 DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
666 in_interrupt = 1;
667
668 still_more:
669 flush_cache_all();
670
671 AREG = CSR0;
672 csr0 = DREG;
673
674 /* ack interrupts */
675 DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
676
677 /* clear errors */
678 if(csr0 & CSR0_ERR)
679 DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
680
681
682 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
683 dev->name, csr0, DREG ));
684
685 if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
686 int old_tx = lp->old_tx;
687
688 // if(lance_debug >= 3) {
689 // int i;
690 //
691 // printk("%s: tx int\n", dev->name);
692 //
693 // for(i = 0; i < TX_RING_SIZE; i++)
694 // printk("ring %d flag=%04x\n", i,
695 // MEM->tx_head[i].flag);
696 // }
697
698 while( old_tx != lp->new_tx) {
699 struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
700
701 DPRINTK(3, ("on tx_ring %d\n", old_tx));
702
703 if (head->flag & TMD1_OWN_CHIP)
704 break; /* It still hasn't been Txed */
705
706 if (head->flag & TMD1_ERR) {
707 int status = head->misc;
708 dev->stats.tx_errors++;
709 if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++;
710 if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++;
711 if (status & TMD3_LCOL) dev->stats.tx_window_errors++;
712 if (status & (TMD3_UFLO | TMD3_BUFF)) {
713 dev->stats.tx_fifo_errors++;
714 printk("%s: Tx FIFO error\n",
715 dev->name);
716 REGA(CSR0) = CSR0_STOP;
717 REGA(CSR3) = CSR3_BSWP;
718 lance_init_ring(dev);
719 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
720 return IRQ_HANDLED;
721 }
722 } else if(head->flag & (TMD1_ENP | TMD1_STP)) {
723
724 head->flag &= ~(TMD1_ENP | TMD1_STP);
725 if(head->flag & (TMD1_ONE | TMD1_MORE))
726 dev->stats.collisions++;
727
728 dev->stats.tx_packets++;
729 DPRINTK(3, ("cleared tx ring %d\n", old_tx));
730 }
731 old_tx = (old_tx +1) & TX_RING_MOD_MASK;
732 }
733
734 lp->old_tx = old_tx;
735 }
736
737
738 if (netif_queue_stopped(dev)) {
739 /* The ring is no longer full, clear tbusy. */
740 netif_start_queue(dev);
741 netif_wake_queue(dev);
742 }
743
744 if (csr0 & CSR0_RINT) /* Rx interrupt */
745 lance_rx( dev );
746
747 /* Log misc errors. */
748 if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */
749 if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */
750 if (csr0 & CSR0_MERR) {
751 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
752 "status %04x.\n", dev->name, csr0 ));
753 /* Restart the chip. */
754 REGA(CSR0) = CSR0_STOP;
755 REGA(CSR3) = CSR3_BSWP;
756 lance_init_ring(dev);
757 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
758 }
759
760
761 /* Clear any other interrupt, and set interrupt enable. */
762 // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
763 // CSR0_IDON | CSR0_INEA;
764
765 REGA(CSR0) = CSR0_INEA;
766
767 if(DREG & (CSR0_RINT | CSR0_TINT)) {
768 DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
769 goto still_more;
770 }
771
772 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
773 dev->name, DREG ));
774 in_interrupt = 0;
775 return IRQ_HANDLED;
776 }
777
778 /* get packet, toss into skbuff */
779 static int lance_rx( struct net_device *dev )
780 {
781 struct lance_private *lp = netdev_priv(dev);
782 int entry = lp->new_rx;
783
784 /* If we own the next entry, it's a new packet. Send it up. */
785 while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
786 struct lance_rx_head *head = &(MEM->rx_head[entry]);
787 int status = head->flag;
788
789 if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
790 /* There is a tricky error noted by John Murphy,
791 <murf@perftech.com> to Russ Nelson: Even with
792 full-sized buffers it's possible for a jabber packet to use two
793 buffers, with only the last correctly noting the error. */
794 if (status & RMD1_ENP) /* Only count a general error at the */
795 dev->stats.rx_errors++; /* end of a packet.*/
796 if (status & RMD1_FRAM) dev->stats.rx_frame_errors++;
797 if (status & RMD1_OFLO) dev->stats.rx_over_errors++;
798 if (status & RMD1_CRC) dev->stats.rx_crc_errors++;
799 if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++;
800 head->flag &= (RMD1_ENP|RMD1_STP);
801 } else {
802 /* Malloc up new buffer, compatible with net-3. */
803 // short pkt_len = head->msg_length;// & 0xfff;
804 short pkt_len = (head->msg_length & 0xfff) - 4;
805 struct sk_buff *skb;
806
807 if (pkt_len < 60) {
808 printk( "%s: Runt packet!\n", dev->name );
809 dev->stats.rx_errors++;
810 }
811 else {
812 skb = dev_alloc_skb( pkt_len+2 );
813 if (skb == NULL) {
814 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
815 dev->name ));
816
817 dev->stats.rx_dropped++;
818 head->msg_length = 0;
819 head->flag |= RMD1_OWN_CHIP;
820 lp->new_rx = (lp->new_rx+1) &
821 RX_RING_MOD_MASK;
822 }
823
824 #if 0
825 if (lance_debug >= 3) {
826 u_char *data = PKTBUF_ADDR(head);
827 DECLARE_MAC_BUF(mac);
828 DECLARE_MAC_BUF(mac2)
829 printk("%s: RX pkt %d type 0x%04x"
830 " from %s to %s",
831 dev->name, lp->new_tx, ((u_short *)data)[6],
832 print_mac(mac, &data[6]), print_mac(mac2, data));
833
834 printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
835 "len %d at %08x\n",
836 data[15], data[16], data[17], data[18],
837 data[19], data[20], data[21], data[22],
838 pkt_len, data);
839 }
840 #endif
841 if (lance_debug >= 3) {
842 u_char *data = PKTBUF_ADDR(head);
843 printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
844 }
845
846
847 skb_reserve( skb, 2 ); /* 16 byte align */
848 skb_put( skb, pkt_len ); /* Make room */
849 skb_copy_to_linear_data(skb,
850 PKTBUF_ADDR(head),
851 pkt_len);
852
853 skb->protocol = eth_type_trans( skb, dev );
854 netif_rx( skb );
855 dev->last_rx = jiffies;
856 dev->stats.rx_packets++;
857 dev->stats.rx_bytes += pkt_len;
858 }
859 }
860
861 // head->buf_length = -PKT_BUF_SZ | 0xf000;
862 head->msg_length = 0;
863 head->flag = RMD1_OWN_CHIP;
864
865 entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
866 }
867
868 /* From lance.c (Donald Becker): */
869 /* We should check that at least two ring entries are free.
870 If not, we should free one and mark stats->rx_dropped++. */
871
872 return 0;
873 }
874
875
876 static int lance_close( struct net_device *dev )
877 {
878 struct lance_private *lp = netdev_priv(dev);
879
880 netif_stop_queue(dev);
881
882 AREG = CSR0;
883
884 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
885 dev->name, DREG ));
886
887 /* We stop the LANCE here -- it occasionally polls
888 memory if we don't. */
889 DREG = CSR0_STOP;
890 return 0;
891 }
892
893
894 /* Set or clear the multicast filter for this adaptor.
895 num_addrs == -1 Promiscuous mode, receive all packets
896 num_addrs == 0 Normal mode, clear multicast list
897 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
898 best-effort filtering.
899 */
900
901 /* completely untested on a sun3 */
902 static void set_multicast_list( struct net_device *dev )
903 {
904 struct lance_private *lp = netdev_priv(dev);
905
906 if(netif_queue_stopped(dev))
907 /* Only possible if board is already started */
908 return;
909
910 /* We take the simple way out and always enable promiscuous mode. */
911 DREG = CSR0_STOP; /* Temporarily stop the lance. */
912
913 if (dev->flags & IFF_PROMISC) {
914 /* Log any net taps. */
915 DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name ));
916 REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
917 } else {
918 short multicast_table[4];
919 int num_addrs = dev->mc_count;
920 int i;
921 /* We don't use the multicast table, but rely on upper-layer
922 * filtering. */
923 memset( multicast_table, (num_addrs == 0) ? 0 : -1,
924 sizeof(multicast_table) );
925 for( i = 0; i < 4; i++ )
926 REGA( CSR8+i ) = multicast_table[i];
927 REGA( CSR15 ) = 0; /* Unset promiscuous mode */
928 }
929
930 /*
931 * Always set BSWP after a STOP as STOP puts it back into
932 * little endian mode.
933 */
934 REGA( CSR3 ) = CSR3_BSWP;
935
936 /* Resume normal operation and reset AREG to CSR0 */
937 REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
938 }
939
940
941 #ifdef MODULE
942
943 static struct net_device *sun3lance_dev;
944
945 int __init init_module(void)
946 {
947 sun3lance_dev = sun3lance_probe(-1);
948 if (IS_ERR(sun3lance_dev))
949 return PTR_ERR(sun3lance_dev);
950 return 0;
951 }
952
953 void __exit cleanup_module(void)
954 {
955 unregister_netdev(sun3lance_dev);
956 #ifdef CONFIG_SUN3
957 iounmap((void __iomem *)sun3lance_dev->base_addr);
958 #endif
959 free_netdev(sun3lance_dev);
960 }
961
962 #endif /* MODULE */
963
Support for the Chinese Samsung S3C2440 based development boards