drivers/bluetooth/bcm203x.c

   1 /*
   2  *
   3  *  Broadcom Blutonium firmware driver
   4  *
   5  *  Copyright (C) 2003  Maxim Krasnyansky <maxk@qualcomm.com>
   6  *  Copyright (C) 2003  Marcel Holtmann <marcel@holtmann.org>
   7  *
   8  *
   9  *  This program is free software; you can redistribute it and/or modify
  10  *  it under the terms of the GNU General Public License as published by
  11  *  the Free Software Foundation; either version 2 of the License, or
  12  *  (at your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful,
  15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *  GNU General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License
  20  *  along with this program; if not, write to the Free Software
  21  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  *
  23  */
  24
  25 #include <linux/module.h>
  26
  27 #include <linux/kernel.h>
  28 #include <linux/init.h>
  29 #include <linux/slab.h>
  30 #include <linux/types.h>
  31 #include <linux/errno.h>
  32
  33 #include <linux/device.h>
  34 #include <linux/firmware.h>
  35
  36 #include <linux/usb.h>
  37
  38 #include <net/bluetooth/bluetooth.h>
  39
  40 #ifndef CONFIG_BT_HCIBCM203X_DEBUG
  41 #undef  BT_DBG
  42 #define BT_DBG(D...)
  43 #endif
  44
  45 #define VERSION "1.1"
  46
  47 static int ignore = 0;
  48
  49 static struct usb_device_id bcm203x_table[] = {
  50         /* Broadcom Blutonium (BCM2033) */
  51         { USB_DEVICE(0x0a5c, 0x2033) },
  52
  53         { }     /* Terminating entry */
  54 };
  55
  56 MODULE_DEVICE_TABLE(usb, bcm203x_table);
  57
  58 #define BCM203X_ERROR           0
  59 #define BCM203X_RESET           1
  60 #define BCM203X_LOAD_MINIDRV    2
  61 #define BCM203X_SELECT_MEMORY   3
  62 #define BCM203X_CHECK_MEMORY    4
  63 #define BCM203X_LOAD_FIRMWARE   5
  64 #define BCM203X_CHECK_FIRMWARE  6
  65
  66 #define BCM203X_IN_EP           0x81
  67 #define BCM203X_OUT_EP          0x02
  68
  69 struct bcm203x_data {
  70         struct usb_device       *udev;
  71
  72         unsigned long           state;
  73
  74         struct work_struct      work;
  75
  76         struct urb              *urb;
  77         unsigned char           *buffer;
  78
  79         unsigned char           *fw_data;
  80         unsigned int            fw_size;
  81         unsigned int            fw_sent;
  82 };
  83
  84 static void bcm203x_complete(struct urb *urb)
  85 {
  86         struct bcm203x_data *data = urb->context;
  87         struct usb_device *udev = urb->dev;
  88         int len;
  89
  90         BT_DBG("udev %p urb %p", udev, urb);
  91
  92         if (urb->status) {
  93                 BT_ERR("URB failed with status %d", urb->status);
  94                 data->state = BCM203X_ERROR;
  95                 return;
  96         }
  97
  98         switch (data->state) {
  99         case BCM203X_LOAD_MINIDRV:
 100                 memcpy(data->buffer, "#", 1);
 101
 102                 usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
 103                                 data->buffer, 1, bcm203x_complete, data);
 104
 105                 data->state = BCM203X_SELECT_MEMORY;
 106
 107                 schedule_work(&data->work);
 108                 break;
 109
 110         case BCM203X_SELECT_MEMORY:
 111                 usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
 112                                 data->buffer, 32, bcm203x_complete, data, 1);
 113
 114                 data->state = BCM203X_CHECK_MEMORY;
 115
 116                 if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
 117                         BT_ERR("Can't submit URB");
 118                 break;
 119
 120         case BCM203X_CHECK_MEMORY:
 121                 if (data->buffer[0] != '#') {
 122                         BT_ERR("Memory select failed");
 123                         data->state = BCM203X_ERROR;
 124                         break;
 125                 }
 126
 127                 data->state = BCM203X_LOAD_FIRMWARE;
 128
 129         case BCM203X_LOAD_FIRMWARE:
 130                 if (data->fw_sent == data->fw_size) {
 131                         usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
 132                                 data->buffer, 32, bcm203x_complete, data, 1);
 133
 134                         data->state = BCM203X_CHECK_FIRMWARE;
 135                 } else {
 136                         len = min_t(uint, data->fw_size - data->fw_sent, 4096);
 137
 138                         usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
 139                                 data->fw_data + data->fw_sent, len, bcm203x_complete, data);
 140
 141                         data->fw_sent += len;
 142                 }
 143
 144                 if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
 145                         BT_ERR("Can't submit URB");
 146                 break;
 147
 148         case BCM203X_CHECK_FIRMWARE:
 149                 if (data->buffer[0] != '.') {
 150                         BT_ERR("Firmware loading failed");
 151                         data->state = BCM203X_ERROR;
 152                         break;
 153                 }
 154
 155                 data->state = BCM203X_RESET;
 156                 break;
 157         }
 158 }
 159
 160 static void bcm203x_work(struct work_struct *work)
 161 {
 162         struct bcm203x_data *data =
 163                 container_of(work, struct bcm203x_data, work);
 164
 165         if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
 166                 BT_ERR("Can't submit URB");
 167 }
 168
 169 static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id *id)
 170 {
 171         const struct firmware *firmware;
 172         struct usb_device *udev = interface_to_usbdev(intf);
 173         struct bcm203x_data *data;
 174         int size;
 175
 176         BT_DBG("intf %p id %p", intf, id);
 177
 178         if (ignore || (intf->cur_altsetting->desc.bInterfaceNumber != 0))
 179                 return -ENODEV;
 180
 181         data = kzalloc(sizeof(*data), GFP_KERNEL);
 182         if (!data) {
 183                 BT_ERR("Can't allocate memory for data structure");
 184                 return -ENOMEM;
 185         }
 186
 187         data->udev  = udev;
 188         data->state = BCM203X_LOAD_MINIDRV;
 189
 190         data->urb = usb_alloc_urb(0, GFP_KERNEL);
 191         if (!data->urb) {
 192                 BT_ERR("Can't allocate URB");
 193                 kfree(data);
 194                 return -ENOMEM;
 195         }
 196
 197         if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
 198                 BT_ERR("Mini driver request failed");
 199                 usb_free_urb(data->urb);
 200                 kfree(data);
 201                 return -EIO;
 202         }
 203
 204         BT_DBG("minidrv data %p size %d", firmware->data, firmware->size);
 205
 206         size = max_t(uint, firmware->size, 4096);
 207
 208         data->buffer = kmalloc(size, GFP_KERNEL);
 209         if (!data->buffer) {
 210                 BT_ERR("Can't allocate memory for mini driver");
 211                 release_firmware(firmware);
 212                 usb_free_urb(data->urb);
 213                 kfree(data);
 214                 return -ENOMEM;
 215         }
 216
 217         memcpy(data->buffer, firmware->data, firmware->size);
 218
 219         usb_fill_bulk_urb(data->urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
 220                         data->buffer, firmware->size, bcm203x_complete, data);
 221
 222         release_firmware(firmware);
 223
 224         if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) {
 225                 BT_ERR("Firmware request failed");
 226                 usb_free_urb(data->urb);
 227                 kfree(data->buffer);
 228                 kfree(data);
 229                 return -EIO;
 230         }
 231
 232         BT_DBG("firmware data %p size %d", firmware->data, firmware->size);
 233
 234         data->fw_data = kmalloc(firmware->size, GFP_KERNEL);
 235         if (!data->fw_data) {
 236                 BT_ERR("Can't allocate memory for firmware image");
 237                 release_firmware(firmware);
 238                 usb_free_urb(data->urb);
 239                 kfree(data->buffer);
 240                 kfree(data);
 241                 return -ENOMEM;
 242         }
 243
 244         memcpy(data->fw_data, firmware->data, firmware->size);
 245         data->fw_size = firmware->size;
 246         data->fw_sent = 0;
 247
 248         release_firmware(firmware);
 249
 250         INIT_WORK(&data->work, bcm203x_work);
 251
 252         usb_set_intfdata(intf, data);
 253
 254         schedule_work(&data->work);
 255
 256         return 0;
 257 }
 258
 259 static void bcm203x_disconnect(struct usb_interface *intf)
 260 {
 261         struct bcm203x_data *data = usb_get_intfdata(intf);
 262
 263         BT_DBG("intf %p", intf);
 264
 265         usb_kill_urb(data->urb);
 266
 267         usb_set_intfdata(intf, NULL);
 268
 269         usb_free_urb(data->urb);
 270         kfree(data->fw_data);
 271         kfree(data->buffer);
 272         kfree(data);
 273 }
 274
 275 static struct usb_driver bcm203x_driver = {
 276         .name           = "bcm203x",
 277         .probe          = bcm203x_probe,
 278         .disconnect     = bcm203x_disconnect,
 279         .id_table       = bcm203x_table,
 280 };
 281
 282 static int __init bcm203x_init(void)
 283 {
 284         int err;
 285
 286         BT_INFO("Broadcom Blutonium firmware driver ver %s", VERSION);
 287
 288         err = usb_register(&bcm203x_driver);
 289         if (err < 0)
 290                 BT_ERR("Failed to register USB driver");
 291
 292         return err;
 293 }
 294
 295 static void __exit bcm203x_exit(void)
 296 {
 297         usb_deregister(&bcm203x_driver);
 298 }
 299
 300 module_init(bcm203x_init);
 301 module_exit(bcm203x_exit);
 302
 303 module_param(ignore, bool, 0644);
 304 MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
 305
 306 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 307 MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
 308 MODULE_VERSION(VERSION);
 309 MODULE_LICENSE("GPL");