x86: Add timer_init to x86_init_ops
[linux-2.6/mini2440.git] / arch / x86 / include / asm / paravirt_types.h
blob0d812e592e3bbe9d724b52a60e5f7c8c08ccacf5
1 #ifndef _ASM_X86_PARAVIRT_TYPES_H
2 #define _ASM_X86_PARAVIRT_TYPES_H
4 /* Bitmask of what can be clobbered: usually at least eax. */
5 #define CLBR_NONE 0
6 #define CLBR_EAX (1 << 0)
7 #define CLBR_ECX (1 << 1)
8 #define CLBR_EDX (1 << 2)
9 #define CLBR_EDI (1 << 3)
11 #ifdef CONFIG_X86_32
12 /* CLBR_ANY should match all regs platform has. For i386, that's just it */
13 #define CLBR_ANY ((1 << 4) - 1)
15 #define CLBR_ARG_REGS (CLBR_EAX | CLBR_EDX | CLBR_ECX)
16 #define CLBR_RET_REG (CLBR_EAX | CLBR_EDX)
17 #define CLBR_SCRATCH (0)
18 #else
19 #define CLBR_RAX CLBR_EAX
20 #define CLBR_RCX CLBR_ECX
21 #define CLBR_RDX CLBR_EDX
22 #define CLBR_RDI CLBR_EDI
23 #define CLBR_RSI (1 << 4)
24 #define CLBR_R8 (1 << 5)
25 #define CLBR_R9 (1 << 6)
26 #define CLBR_R10 (1 << 7)
27 #define CLBR_R11 (1 << 8)
29 #define CLBR_ANY ((1 << 9) - 1)
31 #define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \
32 CLBR_RCX | CLBR_R8 | CLBR_R9)
33 #define CLBR_RET_REG (CLBR_RAX)
34 #define CLBR_SCRATCH (CLBR_R10 | CLBR_R11)
36 #endif /* X86_64 */
38 #define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
40 #ifndef __ASSEMBLY__
42 #include <asm/desc_defs.h>
43 #include <asm/kmap_types.h>
45 struct page;
46 struct thread_struct;
47 struct desc_ptr;
48 struct tss_struct;
49 struct mm_struct;
50 struct desc_struct;
51 struct task_struct;
52 struct cpumask;
55 * Wrapper type for pointers to code which uses the non-standard
56 * calling convention. See PV_CALL_SAVE_REGS_THUNK below.
58 struct paravirt_callee_save {
59 void *func;
62 /* general info */
63 struct pv_info {
64 unsigned int kernel_rpl;
65 int shared_kernel_pmd;
66 int paravirt_enabled;
67 const char *name;
70 struct pv_init_ops {
72 * Patch may replace one of the defined code sequences with
73 * arbitrary code, subject to the same register constraints.
74 * This generally means the code is not free to clobber any
75 * registers other than EAX. The patch function should return
76 * the number of bytes of code generated, as we nop pad the
77 * rest in generic code.
79 unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
80 unsigned long addr, unsigned len);
84 struct pv_lazy_ops {
85 /* Set deferred update mode, used for batching operations. */
86 void (*enter)(void);
87 void (*leave)(void);
90 struct pv_time_ops {
91 /* Set and set time of day */
92 unsigned long (*get_wallclock)(void);
93 int (*set_wallclock)(unsigned long);
95 unsigned long long (*sched_clock)(void);
96 unsigned long (*get_tsc_khz)(void);
99 struct pv_cpu_ops {
100 /* hooks for various privileged instructions */
101 unsigned long (*get_debugreg)(int regno);
102 void (*set_debugreg)(int regno, unsigned long value);
104 void (*clts)(void);
106 unsigned long (*read_cr0)(void);
107 void (*write_cr0)(unsigned long);
109 unsigned long (*read_cr4_safe)(void);
110 unsigned long (*read_cr4)(void);
111 void (*write_cr4)(unsigned long);
113 #ifdef CONFIG_X86_64
114 unsigned long (*read_cr8)(void);
115 void (*write_cr8)(unsigned long);
116 #endif
118 /* Segment descriptor handling */
119 void (*load_tr_desc)(void);
120 void (*load_gdt)(const struct desc_ptr *);
121 void (*load_idt)(const struct desc_ptr *);
122 void (*store_gdt)(struct desc_ptr *);
123 void (*store_idt)(struct desc_ptr *);
124 void (*set_ldt)(const void *desc, unsigned entries);
125 unsigned long (*store_tr)(void);
126 void (*load_tls)(struct thread_struct *t, unsigned int cpu);
127 #ifdef CONFIG_X86_64
128 void (*load_gs_index)(unsigned int idx);
129 #endif
130 void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
131 const void *desc);
132 void (*write_gdt_entry)(struct desc_struct *,
133 int entrynum, const void *desc, int size);
134 void (*write_idt_entry)(gate_desc *,
135 int entrynum, const gate_desc *gate);
136 void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
137 void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
139 void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
141 void (*set_iopl_mask)(unsigned mask);
143 void (*wbinvd)(void);
144 void (*io_delay)(void);
146 /* cpuid emulation, mostly so that caps bits can be disabled */
147 void (*cpuid)(unsigned int *eax, unsigned int *ebx,
148 unsigned int *ecx, unsigned int *edx);
150 /* MSR, PMC and TSR operations.
151 err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
152 u64 (*read_msr_amd)(unsigned int msr, int *err);
153 u64 (*read_msr)(unsigned int msr, int *err);
154 int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
156 u64 (*read_tsc)(void);
157 u64 (*read_pmc)(int counter);
158 unsigned long long (*read_tscp)(unsigned int *aux);
161 * Atomically enable interrupts and return to userspace. This
162 * is only ever used to return to 32-bit processes; in a
163 * 64-bit kernel, it's used for 32-on-64 compat processes, but
164 * never native 64-bit processes. (Jump, not call.)
166 void (*irq_enable_sysexit)(void);
169 * Switch to usermode gs and return to 64-bit usermode using
170 * sysret. Only used in 64-bit kernels to return to 64-bit
171 * processes. Usermode register state, including %rsp, must
172 * already be restored.
174 void (*usergs_sysret64)(void);
177 * Switch to usermode gs and return to 32-bit usermode using
178 * sysret. Used to return to 32-on-64 compat processes.
179 * Other usermode register state, including %esp, must already
180 * be restored.
182 void (*usergs_sysret32)(void);
184 /* Normal iret. Jump to this with the standard iret stack
185 frame set up. */
186 void (*iret)(void);
188 void (*swapgs)(void);
190 void (*start_context_switch)(struct task_struct *prev);
191 void (*end_context_switch)(struct task_struct *next);
194 struct pv_irq_ops {
196 * Get/set interrupt state. save_fl and restore_fl are only
197 * expected to use X86_EFLAGS_IF; all other bits
198 * returned from save_fl are undefined, and may be ignored by
199 * restore_fl.
201 * NOTE: These functions callers expect the callee to preserve
202 * more registers than the standard C calling convention.
204 struct paravirt_callee_save save_fl;
205 struct paravirt_callee_save restore_fl;
206 struct paravirt_callee_save irq_disable;
207 struct paravirt_callee_save irq_enable;
209 void (*safe_halt)(void);
210 void (*halt)(void);
212 #ifdef CONFIG_X86_64
213 void (*adjust_exception_frame)(void);
214 #endif
217 struct pv_apic_ops {
218 #ifdef CONFIG_X86_LOCAL_APIC
219 void (*startup_ipi_hook)(int phys_apicid,
220 unsigned long start_eip,
221 unsigned long start_esp);
222 #endif
225 struct pv_mmu_ops {
226 unsigned long (*read_cr2)(void);
227 void (*write_cr2)(unsigned long);
229 unsigned long (*read_cr3)(void);
230 void (*write_cr3)(unsigned long);
233 * Hooks for intercepting the creation/use/destruction of an
234 * mm_struct.
236 void (*activate_mm)(struct mm_struct *prev,
237 struct mm_struct *next);
238 void (*dup_mmap)(struct mm_struct *oldmm,
239 struct mm_struct *mm);
240 void (*exit_mmap)(struct mm_struct *mm);
243 /* TLB operations */
244 void (*flush_tlb_user)(void);
245 void (*flush_tlb_kernel)(void);
246 void (*flush_tlb_single)(unsigned long addr);
247 void (*flush_tlb_others)(const struct cpumask *cpus,
248 struct mm_struct *mm,
249 unsigned long va);
251 /* Hooks for allocating and freeing a pagetable top-level */
252 int (*pgd_alloc)(struct mm_struct *mm);
253 void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
256 * Hooks for allocating/releasing pagetable pages when they're
257 * attached to a pagetable
259 void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
260 void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
261 void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
262 void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
263 void (*release_pte)(unsigned long pfn);
264 void (*release_pmd)(unsigned long pfn);
265 void (*release_pud)(unsigned long pfn);
267 /* Pagetable manipulation functions */
268 void (*set_pte)(pte_t *ptep, pte_t pteval);
269 void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
270 pte_t *ptep, pte_t pteval);
271 void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
272 void (*pte_update)(struct mm_struct *mm, unsigned long addr,
273 pte_t *ptep);
274 void (*pte_update_defer)(struct mm_struct *mm,
275 unsigned long addr, pte_t *ptep);
277 pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
278 pte_t *ptep);
279 void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
280 pte_t *ptep, pte_t pte);
282 struct paravirt_callee_save pte_val;
283 struct paravirt_callee_save make_pte;
285 struct paravirt_callee_save pgd_val;
286 struct paravirt_callee_save make_pgd;
288 #if PAGETABLE_LEVELS >= 3
289 #ifdef CONFIG_X86_PAE
290 void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
291 void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
292 pte_t *ptep);
293 void (*pmd_clear)(pmd_t *pmdp);
295 #endif /* CONFIG_X86_PAE */
297 void (*set_pud)(pud_t *pudp, pud_t pudval);
299 struct paravirt_callee_save pmd_val;
300 struct paravirt_callee_save make_pmd;
302 #if PAGETABLE_LEVELS == 4
303 struct paravirt_callee_save pud_val;
304 struct paravirt_callee_save make_pud;
306 void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
307 #endif /* PAGETABLE_LEVELS == 4 */
308 #endif /* PAGETABLE_LEVELS >= 3 */
310 #ifdef CONFIG_HIGHPTE
311 void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
312 #endif
314 struct pv_lazy_ops lazy_mode;
316 /* dom0 ops */
318 /* Sometimes the physical address is a pfn, and sometimes its
319 an mfn. We can tell which is which from the index. */
320 void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
321 phys_addr_t phys, pgprot_t flags);
324 struct raw_spinlock;
325 struct pv_lock_ops {
326 int (*spin_is_locked)(struct raw_spinlock *lock);
327 int (*spin_is_contended)(struct raw_spinlock *lock);
328 void (*spin_lock)(struct raw_spinlock *lock);
329 void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
330 int (*spin_trylock)(struct raw_spinlock *lock);
331 void (*spin_unlock)(struct raw_spinlock *lock);
334 /* This contains all the paravirt structures: we get a convenient
335 * number for each function using the offset which we use to indicate
336 * what to patch. */
337 struct paravirt_patch_template {
338 struct pv_init_ops pv_init_ops;
339 struct pv_time_ops pv_time_ops;
340 struct pv_cpu_ops pv_cpu_ops;
341 struct pv_irq_ops pv_irq_ops;
342 struct pv_apic_ops pv_apic_ops;
343 struct pv_mmu_ops pv_mmu_ops;
344 struct pv_lock_ops pv_lock_ops;
347 extern struct pv_info pv_info;
348 extern struct pv_init_ops pv_init_ops;
349 extern struct pv_time_ops pv_time_ops;
350 extern struct pv_cpu_ops pv_cpu_ops;
351 extern struct pv_irq_ops pv_irq_ops;
352 extern struct pv_apic_ops pv_apic_ops;
353 extern struct pv_mmu_ops pv_mmu_ops;
354 extern struct pv_lock_ops pv_lock_ops;
356 #define PARAVIRT_PATCH(x) \
357 (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
359 #define paravirt_type(op) \
360 [paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \
361 [paravirt_opptr] "i" (&(op))
362 #define paravirt_clobber(clobber) \
363 [paravirt_clobber] "i" (clobber)
366 * Generate some code, and mark it as patchable by the
367 * apply_paravirt() alternate instruction patcher.
369 #define _paravirt_alt(insn_string, type, clobber) \
370 "771:\n\t" insn_string "\n" "772:\n" \
371 ".pushsection .parainstructions,\"a\"\n" \
372 _ASM_ALIGN "\n" \
373 _ASM_PTR " 771b\n" \
374 " .byte " type "\n" \
375 " .byte 772b-771b\n" \
376 " .short " clobber "\n" \
377 ".popsection\n"
379 /* Generate patchable code, with the default asm parameters. */
380 #define paravirt_alt(insn_string) \
381 _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
383 /* Simple instruction patching code. */
384 #define DEF_NATIVE(ops, name, code) \
385 extern const char start_##ops##_##name[], end_##ops##_##name[]; \
386 asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
388 unsigned paravirt_patch_nop(void);
389 unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
390 unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
391 unsigned paravirt_patch_ignore(unsigned len);
392 unsigned paravirt_patch_call(void *insnbuf,
393 const void *target, u16 tgt_clobbers,
394 unsigned long addr, u16 site_clobbers,
395 unsigned len);
396 unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
397 unsigned long addr, unsigned len);
398 unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
399 unsigned long addr, unsigned len);
401 unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
402 const char *start, const char *end);
404 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
405 unsigned long addr, unsigned len);
407 int paravirt_disable_iospace(void);
410 * This generates an indirect call based on the operation type number.
411 * The type number, computed in PARAVIRT_PATCH, is derived from the
412 * offset into the paravirt_patch_template structure, and can therefore be
413 * freely converted back into a structure offset.
415 #define PARAVIRT_CALL "call *%c[paravirt_opptr];"
418 * These macros are intended to wrap calls through one of the paravirt
419 * ops structs, so that they can be later identified and patched at
420 * runtime.
422 * Normally, a call to a pv_op function is a simple indirect call:
423 * (pv_op_struct.operations)(args...).
425 * Unfortunately, this is a relatively slow operation for modern CPUs,
426 * because it cannot necessarily determine what the destination
427 * address is. In this case, the address is a runtime constant, so at
428 * the very least we can patch the call to e a simple direct call, or
429 * ideally, patch an inline implementation into the callsite. (Direct
430 * calls are essentially free, because the call and return addresses
431 * are completely predictable.)
433 * For i386, these macros rely on the standard gcc "regparm(3)" calling
434 * convention, in which the first three arguments are placed in %eax,
435 * %edx, %ecx (in that order), and the remaining arguments are placed
436 * on the stack. All caller-save registers (eax,edx,ecx) are expected
437 * to be modified (either clobbered or used for return values).
438 * X86_64, on the other hand, already specifies a register-based calling
439 * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
440 * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
441 * special handling for dealing with 4 arguments, unlike i386.
442 * However, x86_64 also have to clobber all caller saved registers, which
443 * unfortunately, are quite a bit (r8 - r11)
445 * The call instruction itself is marked by placing its start address
446 * and size into the .parainstructions section, so that
447 * apply_paravirt() in arch/i386/kernel/alternative.c can do the
448 * appropriate patching under the control of the backend pv_init_ops
449 * implementation.
451 * Unfortunately there's no way to get gcc to generate the args setup
452 * for the call, and then allow the call itself to be generated by an
453 * inline asm. Because of this, we must do the complete arg setup and
454 * return value handling from within these macros. This is fairly
455 * cumbersome.
457 * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
458 * It could be extended to more arguments, but there would be little
459 * to be gained from that. For each number of arguments, there are
460 * the two VCALL and CALL variants for void and non-void functions.
462 * When there is a return value, the invoker of the macro must specify
463 * the return type. The macro then uses sizeof() on that type to
464 * determine whether its a 32 or 64 bit value, and places the return
465 * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
466 * 64-bit). For x86_64 machines, it just returns at %rax regardless of
467 * the return value size.
469 * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
470 * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
471 * in low,high order
473 * Small structures are passed and returned in registers. The macro
474 * calling convention can't directly deal with this, so the wrapper
475 * functions must do this.
477 * These PVOP_* macros are only defined within this header. This
478 * means that all uses must be wrapped in inline functions. This also
479 * makes sure the incoming and outgoing types are always correct.
481 #ifdef CONFIG_X86_32
482 #define PVOP_VCALL_ARGS \
483 unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
484 #define PVOP_CALL_ARGS PVOP_VCALL_ARGS
486 #define PVOP_CALL_ARG1(x) "a" ((unsigned long)(x))
487 #define PVOP_CALL_ARG2(x) "d" ((unsigned long)(x))
488 #define PVOP_CALL_ARG3(x) "c" ((unsigned long)(x))
490 #define PVOP_VCALL_CLOBBERS "=a" (__eax), "=d" (__edx), \
491 "=c" (__ecx)
492 #define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS
494 #define PVOP_VCALLEE_CLOBBERS "=a" (__eax), "=d" (__edx)
495 #define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
497 #define EXTRA_CLOBBERS
498 #define VEXTRA_CLOBBERS
499 #else /* CONFIG_X86_64 */
500 #define PVOP_VCALL_ARGS \
501 unsigned long __edi = __edi, __esi = __esi, \
502 __edx = __edx, __ecx = __ecx
503 #define PVOP_CALL_ARGS PVOP_VCALL_ARGS, __eax
505 #define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x))
506 #define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x))
507 #define PVOP_CALL_ARG3(x) "d" ((unsigned long)(x))
508 #define PVOP_CALL_ARG4(x) "c" ((unsigned long)(x))
510 #define PVOP_VCALL_CLOBBERS "=D" (__edi), \
511 "=S" (__esi), "=d" (__edx), \
512 "=c" (__ecx)
513 #define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax)
515 #define PVOP_VCALLEE_CLOBBERS "=a" (__eax)
516 #define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
518 #define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11"
519 #define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11"
520 #endif /* CONFIG_X86_32 */
522 #ifdef CONFIG_PARAVIRT_DEBUG
523 #define PVOP_TEST_NULL(op) BUG_ON(op == NULL)
524 #else
525 #define PVOP_TEST_NULL(op) ((void)op)
526 #endif
528 #define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr, \
529 pre, post, ...) \
530 ({ \
531 rettype __ret; \
532 PVOP_CALL_ARGS; \
533 PVOP_TEST_NULL(op); \
534 /* This is 32-bit specific, but is okay in 64-bit */ \
535 /* since this condition will never hold */ \
536 if (sizeof(rettype) > sizeof(unsigned long)) { \
537 asm volatile(pre \
538 paravirt_alt(PARAVIRT_CALL) \
539 post \
540 : call_clbr \
541 : paravirt_type(op), \
542 paravirt_clobber(clbr), \
543 ##__VA_ARGS__ \
544 : "memory", "cc" extra_clbr); \
545 __ret = (rettype)((((u64)__edx) << 32) | __eax); \
546 } else { \
547 asm volatile(pre \
548 paravirt_alt(PARAVIRT_CALL) \
549 post \
550 : call_clbr \
551 : paravirt_type(op), \
552 paravirt_clobber(clbr), \
553 ##__VA_ARGS__ \
554 : "memory", "cc" extra_clbr); \
555 __ret = (rettype)__eax; \
557 __ret; \
560 #define __PVOP_CALL(rettype, op, pre, post, ...) \
561 ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS, \
562 EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
564 #define __PVOP_CALLEESAVE(rettype, op, pre, post, ...) \
565 ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
566 PVOP_CALLEE_CLOBBERS, , \
567 pre, post, ##__VA_ARGS__)
570 #define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \
571 ({ \
572 PVOP_VCALL_ARGS; \
573 PVOP_TEST_NULL(op); \
574 asm volatile(pre \
575 paravirt_alt(PARAVIRT_CALL) \
576 post \
577 : call_clbr \
578 : paravirt_type(op), \
579 paravirt_clobber(clbr), \
580 ##__VA_ARGS__ \
581 : "memory", "cc" extra_clbr); \
584 #define __PVOP_VCALL(op, pre, post, ...) \
585 ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS, \
586 VEXTRA_CLOBBERS, \
587 pre, post, ##__VA_ARGS__)
589 #define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...) \
590 ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
591 PVOP_VCALLEE_CLOBBERS, , \
592 pre, post, ##__VA_ARGS__)
596 #define PVOP_CALL0(rettype, op) \
597 __PVOP_CALL(rettype, op, "", "")
598 #define PVOP_VCALL0(op) \
599 __PVOP_VCALL(op, "", "")
601 #define PVOP_CALLEE0(rettype, op) \
602 __PVOP_CALLEESAVE(rettype, op, "", "")
603 #define PVOP_VCALLEE0(op) \
604 __PVOP_VCALLEESAVE(op, "", "")
607 #define PVOP_CALL1(rettype, op, arg1) \
608 __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
609 #define PVOP_VCALL1(op, arg1) \
610 __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
612 #define PVOP_CALLEE1(rettype, op, arg1) \
613 __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
614 #define PVOP_VCALLEE1(op, arg1) \
615 __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
618 #define PVOP_CALL2(rettype, op, arg1, arg2) \
619 __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
620 PVOP_CALL_ARG2(arg2))
621 #define PVOP_VCALL2(op, arg1, arg2) \
622 __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
623 PVOP_CALL_ARG2(arg2))
625 #define PVOP_CALLEE2(rettype, op, arg1, arg2) \
626 __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
627 PVOP_CALL_ARG2(arg2))
628 #define PVOP_VCALLEE2(op, arg1, arg2) \
629 __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1), \
630 PVOP_CALL_ARG2(arg2))
633 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3) \
634 __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
635 PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
636 #define PVOP_VCALL3(op, arg1, arg2, arg3) \
637 __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
638 PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
640 /* This is the only difference in x86_64. We can make it much simpler */
641 #ifdef CONFIG_X86_32
642 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
643 __PVOP_CALL(rettype, op, \
644 "push %[_arg4];", "lea 4(%%esp),%%esp;", \
645 PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
646 PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
647 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
648 __PVOP_VCALL(op, \
649 "push %[_arg4];", "lea 4(%%esp),%%esp;", \
650 "0" ((u32)(arg1)), "1" ((u32)(arg2)), \
651 "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
652 #else
653 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
654 __PVOP_CALL(rettype, op, "", "", \
655 PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
656 PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
657 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
658 __PVOP_VCALL(op, "", "", \
659 PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
660 PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
661 #endif
663 /* Lazy mode for batching updates / context switch */
664 enum paravirt_lazy_mode {
665 PARAVIRT_LAZY_NONE,
666 PARAVIRT_LAZY_MMU,
667 PARAVIRT_LAZY_CPU,
670 enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
671 void paravirt_start_context_switch(struct task_struct *prev);
672 void paravirt_end_context_switch(struct task_struct *next);
674 void paravirt_enter_lazy_mmu(void);
675 void paravirt_leave_lazy_mmu(void);
677 void _paravirt_nop(void);
678 u32 _paravirt_ident_32(u32);
679 u64 _paravirt_ident_64(u64);
681 #define paravirt_nop ((void *)_paravirt_nop)
683 /* These all sit in the .parainstructions section to tell us what to patch. */
684 struct paravirt_patch_site {
685 u8 *instr; /* original instructions */
686 u8 instrtype; /* type of this instruction */
687 u8 len; /* length of original instruction */
688 u16 clobbers; /* what registers you may clobber */
691 extern struct paravirt_patch_site __parainstructions[],
692 __parainstructions_end[];
694 #endif /* __ASSEMBLY__ */
696 #endif /* _ASM_X86_PARAVIRT_TYPES_H */