arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h

   1 /*
   2  * Copyright 2008-2009 Analog Devices Inc.
   3  *
   4  * Licensed under the GPL-2 or later
   5  */
   6
   7 #include <linux/serial.h>
   8 #include <asm/dma.h>
   9 #include <asm/portmux.h>
  10
  11 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
  12 #define UART_GET_DLL(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLL))
  13 #define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
  14 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
  15 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
  16 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
  17 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
  18
  19 #define UART_PUT_CHAR(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_THR), v)
  20 #define UART_PUT_DLL(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
  21 #define UART_PUT_IER(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_IER), v)
  22 #define UART_SET_IER(uart, v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
  23 #define UART_CLEAR_IER(uart, v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
  24 #define UART_PUT_DLH(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
  25 #define UART_PUT_LCR(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
  26 #define UART_PUT_GCTL(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
  27
  28 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
  29 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
  30
  31 #define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
  32 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
  33 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
  34 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
  35 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
  36
  37 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
  38 # define CONFIG_SERIAL_BFIN_CTSRTS
  39
  40 # ifndef CONFIG_UART0_CTS_PIN
  41 #  define CONFIG_UART0_CTS_PIN -1
  42 # endif
  43
  44 # ifndef CONFIG_UART0_RTS_PIN
  45 #  define CONFIG_UART0_RTS_PIN -1
  46 # endif
  47
  48 # ifndef CONFIG_UART1_CTS_PIN
  49 #  define CONFIG_UART1_CTS_PIN -1
  50 # endif
  51
  52 # ifndef CONFIG_UART1_RTS_PIN
  53 #  define CONFIG_UART1_RTS_PIN -1
  54 # endif
  55 #endif
  56
  57 #define BFIN_UART_TX_FIFO_SIZE  2
  58
  59 /*
  60  * The pin configuration is different from schematic
  61  */
  62 struct bfin_serial_port {
  63         struct uart_port port;
  64         unsigned int old_status;
  65         int status_irq;
  66         unsigned int lsr;
  67 #ifdef CONFIG_SERIAL_BFIN_DMA
  68         int tx_done;
  69         int tx_count;
  70         struct circ_buf rx_dma_buf;
  71         struct timer_list rx_dma_timer;
  72         int rx_dma_nrows;
  73         unsigned int tx_dma_channel;
  74         unsigned int rx_dma_channel;
  75         struct work_struct tx_dma_workqueue;
  76 #endif
  77 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  78         struct timer_list cts_timer;
  79         int cts_pin;
  80         int rts_pin;
  81 #endif
  82 };
  83
  84 /* The hardware clears the LSR bits upon read, so we need to cache
  85  * some of the more fun bits in software so they don't get lost
  86  * when checking the LSR in other code paths (TX).
  87  */
  88 static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
  89 {
  90         unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
  91         uart->lsr |= (lsr & (BI|FE|PE|OE));
  92         return lsr | uart->lsr;
  93 }
  94
  95 static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
  96 {
  97         uart->lsr = 0;
  98         bfin_write16(uart->port.membase + OFFSET_LSR, -1);
  99 }
 100
 101 struct bfin_serial_res {
 102         unsigned long uart_base_addr;
 103         int uart_irq;
 104         int uart_status_irq;
 105 #ifdef CONFIG_SERIAL_BFIN_DMA
 106         unsigned int uart_tx_dma_channel;
 107         unsigned int uart_rx_dma_channel;
 108 #endif
 109 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 110         int uart_cts_pin;
 111         int uart_rts_pin;
 112 #endif
 113 };
 114
 115 struct bfin_serial_res bfin_serial_resource[] = {
 116 #ifdef CONFIG_SERIAL_BFIN_UART0
 117         {
 118          0xFFC00400,
 119          IRQ_UART0_RX,
 120          IRQ_UART0_ERROR,
 121 #ifdef CONFIG_SERIAL_BFIN_DMA
 122          CH_UART0_TX,
 123          CH_UART0_RX,
 124 #endif
 125 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 126          CONFIG_UART0_CTS_PIN,
 127          CONFIG_UART0_RTS_PIN,
 128 #endif
 129          },
 130 #endif
 131 #ifdef CONFIG_SERIAL_BFIN_UART1
 132         {
 133          0xFFC02000,
 134          IRQ_UART1_RX,
 135          IRQ_UART1_ERROR,
 136 #ifdef CONFIG_SERIAL_BFIN_DMA
 137          CH_UART1_TX,
 138          CH_UART1_RX,
 139 #endif
 140 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 141          CONFIG_UART1_CTS_PIN,
 142          CONFIG_UART1_RTS_PIN,
 143 #endif
 144          },
 145 #endif
 146 };
 147
 148 #define DRIVER_NAME "bfin-uart"