e1000e: Use skb_copy_to_linear_data_offset introduced in 2.6.22
[linux-2.6/mini2440.git] / drivers / usb / host / ohci-lh7a404.c
blob1ef5d482c145324f8638b45ec1c9d82dbf54e672
1 /*
2 * OHCI HCD (Host Controller Driver) for USB.
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 * (C) Copyright 2002 Hewlett-Packard Company
8 * Bus Glue for Sharp LH7A404
10 * Written by Christopher Hoover <ch@hpl.hp.com>
11 * Based on fragments of previous driver by Russell King et al.
13 * Modified for LH7A404 from ohci-sa1111.c
14 * by Durgesh Pattamatta <pattamattad@sharpsec.com>
16 * This file is licenced under the GPL.
19 #include <linux/platform_device.h>
20 #include <linux/signal.h>
22 #include <asm/hardware.h>
25 extern int usb_disabled(void);
27 /*-------------------------------------------------------------------------*/
29 static void lh7a404_start_hc(struct platform_device *dev)
31 printk(KERN_DEBUG __FILE__
32 ": starting LH7A404 OHCI USB Controller\n");
35 * Now, carefully enable the USB clock, and take
36 * the USB host controller out of reset.
38 CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
39 udelay(1000);
40 USBH_CMDSTATUS = OHCI_HCR;
42 printk(KERN_DEBUG __FILE__
43 ": Clock to USB host has been enabled \n");
46 static void lh7a404_stop_hc(struct platform_device *dev)
48 printk(KERN_DEBUG __FILE__
49 ": stopping LH7A404 OHCI USB Controller\n");
51 CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */
55 /*-------------------------------------------------------------------------*/
57 /* configure so an HC device and id are always provided */
58 /* always called with process context; sleeping is OK */
61 /**
62 * usb_hcd_lh7a404_probe - initialize LH7A404-based HCDs
63 * Context: !in_interrupt()
65 * Allocates basic resources for this USB host controller, and
66 * then invokes the start() method for the HCD associated with it
67 * through the hotplug entry's driver_data.
70 int usb_hcd_lh7a404_probe (const struct hc_driver *driver,
71 struct platform_device *dev)
73 int retval;
74 struct usb_hcd *hcd;
76 if (dev->resource[1].flags != IORESOURCE_IRQ) {
77 pr_debug("resource[1] is not IORESOURCE_IRQ");
78 return -ENOMEM;
81 hcd = usb_create_hcd(driver, &dev->dev, "lh7a404");
82 if (!hcd)
83 return -ENOMEM;
84 hcd->rsrc_start = dev->resource[0].start;
85 hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
87 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
88 pr_debug("request_mem_region failed");
89 retval = -EBUSY;
90 goto err1;
93 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
94 if (!hcd->regs) {
95 pr_debug("ioremap failed");
96 retval = -ENOMEM;
97 goto err2;
100 lh7a404_start_hc(dev);
101 ohci_hcd_init(hcd_to_ohci(hcd));
103 retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
104 if (retval == 0)
105 return retval;
107 lh7a404_stop_hc(dev);
108 iounmap(hcd->regs);
109 err2:
110 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
111 err1:
112 usb_put_hcd(hcd);
113 return retval;
117 /* may be called without controller electrically present */
118 /* may be called with controller, bus, and devices active */
121 * usb_hcd_lh7a404_remove - shutdown processing for LH7A404-based HCDs
122 * @dev: USB Host Controller being removed
123 * Context: !in_interrupt()
125 * Reverses the effect of usb_hcd_lh7a404_probe(), first invoking
126 * the HCD's stop() method. It is always called from a thread
127 * context, normally "rmmod", "apmd", or something similar.
130 void usb_hcd_lh7a404_remove (struct usb_hcd *hcd, struct platform_device *dev)
132 usb_remove_hcd(hcd);
133 lh7a404_stop_hc(dev);
134 iounmap(hcd->regs);
135 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
136 usb_put_hcd(hcd);
139 /*-------------------------------------------------------------------------*/
141 static int __devinit
142 ohci_lh7a404_start (struct usb_hcd *hcd)
144 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
145 int ret;
147 ohci_dbg (ohci, "ohci_lh7a404_start, ohci:%p", ohci);
148 if ((ret = ohci_init(ohci)) < 0)
149 return ret;
151 if ((ret = ohci_run (ohci)) < 0) {
152 err ("can't start %s", hcd->self.bus_name);
153 ohci_stop (hcd);
154 return ret;
156 return 0;
159 /*-------------------------------------------------------------------------*/
161 static const struct hc_driver ohci_lh7a404_hc_driver = {
162 .description = hcd_name,
163 .product_desc = "LH7A404 OHCI",
164 .hcd_priv_size = sizeof(struct ohci_hcd),
167 * generic hardware linkage
169 .irq = ohci_irq,
170 .flags = HCD_USB11 | HCD_MEMORY,
173 * basic lifecycle operations
175 .start = ohci_lh7a404_start,
176 .stop = ohci_stop,
177 .shutdown = ohci_shutdown,
180 * managing i/o requests and associated device resources
182 .urb_enqueue = ohci_urb_enqueue,
183 .urb_dequeue = ohci_urb_dequeue,
184 .endpoint_disable = ohci_endpoint_disable,
187 * scheduling support
189 .get_frame_number = ohci_get_frame,
192 * root hub support
194 .hub_status_data = ohci_hub_status_data,
195 .hub_control = ohci_hub_control,
196 .hub_irq_enable = ohci_rhsc_enable,
197 #ifdef CONFIG_PM
198 .bus_suspend = ohci_bus_suspend,
199 .bus_resume = ohci_bus_resume,
200 #endif
201 .start_port_reset = ohci_start_port_reset,
204 /*-------------------------------------------------------------------------*/
206 static int ohci_hcd_lh7a404_drv_probe(struct platform_device *pdev)
208 int ret;
210 pr_debug ("In ohci_hcd_lh7a404_drv_probe");
212 if (usb_disabled())
213 return -ENODEV;
215 ret = usb_hcd_lh7a404_probe(&ohci_lh7a404_hc_driver, pdev);
216 return ret;
219 static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev)
221 struct usb_hcd *hcd = platform_get_drvdata(pdev);
223 usb_hcd_lh7a404_remove(hcd, pdev);
224 return 0;
226 /*TBD*/
227 /*static int ohci_hcd_lh7a404_drv_suspend(struct platform_device *dev)
229 struct usb_hcd *hcd = platform_get_drvdata(dev);
231 return 0;
233 static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev)
235 struct usb_hcd *hcd = platform_get_drvdata(dev);
238 return 0;
242 static struct platform_driver ohci_hcd_lh7a404_driver = {
243 .probe = ohci_hcd_lh7a404_drv_probe,
244 .remove = ohci_hcd_lh7a404_drv_remove,
245 .shutdown = usb_hcd_platform_shutdown,
246 /*.suspend = ohci_hcd_lh7a404_drv_suspend, */
247 /*.resume = ohci_hcd_lh7a404_drv_resume, */
248 .driver = {
249 .name = "lh7a404-ohci",
250 .owner = THIS_MODULE,
254 MODULE_ALIAS("platform:lh7a404-ohci");