sound/oss/aedsp16.c

   1 /*
   2    sound/oss/aedsp16.c
   3
   4    Audio Excel DSP 16 software configuration routines
   5    Copyright (C) 1995,1996,1997,1998  Riccardo Facchetti (fizban@tin.it)
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 2 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20
  21  */
  22 /*
  23  * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
  24  * headers needed by this source.
  25  */
  26 #include <linux/config.h>
  27 #include <linux/delay.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include "sound_config.h"
  31
  32 /*
  33  * Sanity checks
  34  */
  35
  36 #if defined(CONFIG_SOUND_AEDSP16_SBPRO) && defined(CONFIG_SOUND_AEDSP16_MSS)
  37 #error You have to enable only one of the MSS and SBPRO emulations.
  38 #endif
  39
  40 /*
  41
  42    READ THIS
  43
  44    This module started to configure the Audio Excel DSP 16 Sound Card.
  45    Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
  46
  47    NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
  48    audio card and want to see the kernel support for it, please contact me.
  49
  50    Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
  51    compatible card.
  52    It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
  53    so before this module, the only way to configure the DSP under linux was
  54    boot the MS-DOS loading the sound.sys device driver (this driver soft-
  55    configure the sound board hardware by massaging someone of its registers),
  56    and then ctrl-alt-del to boot linux with the DSP configured by the DOS
  57    driver.
  58
  59    This module works configuring your Audio Excel DSP 16's irq, dma and
  60    mpu-401-irq. The OSS Lite routines rely on the fact that if the
  61    hardware is there, they can detect it. The problem with AEDSP16 is
  62    that no hardware can be found by the probe routines if the sound card
  63    is not configured properly. Sometimes the kernel probe routines can find
  64    an SBPRO even when the card is not configured (this is the standard setup
  65    of the card), but the SBPRO emulation don't work well if the card is not
  66    properly initialized. For this reason
  67
  68    aedsp16_init_board()
  69
  70    routine is called before the OSS Lite probe routines try to detect the
  71    hardware.
  72
  73    NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
  74
  75    NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
  76    have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
  77    have to be configured by software.
  78
  79    NOTE: The driver is merged with the new OSS Lite sound driver. It works
  80    as a lowlevel driver.
  81
  82    The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
  83    the OSS Lite sound driver can be configured for SBPRO and MSS cards
  84    at the same time, but the aedsp16 can't be two cards!!
  85    When we configure it, we have to choose the SBPRO or the MSS emulation
  86    for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
  87
  88    NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
  89    please let me know if it works.
  90
  91    The MPU-401 support can be compiled in together with one of the other
  92    two operating modes.
  93
  94    NOTE: This is something like plug-and-play: we have only to plug
  95    the AEDSP16 board in the socket, and then configure and compile
  96    a kernel that uses the AEDSP16 software configuration capability.
  97    No jumper setting is needed!
  98
  99    For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
 100    you have just to make config the OSS Lite package, configuring
 101    the AEDSP16 sound card, then activating the SBPro emulation mode
 102    and at last configuring IRQ and DMA.
 103    Compile the kernel and run it.
 104
 105    NOTE: This means for SC-6000 cards that you can choose irq and dma,
 106    but not the I/O addresses. To change I/O addresses you have to set
 107    them with jumpers. For SC-6600 cards you have no jumpers so you have
 108    to set up your full card configuration in the make config.
 109
 110    You can change the irq/dma/mirq settings WITHOUT THE NEED to open
 111    your computer and massage the jumpers (there are no irq/dma/mirq
 112    jumpers to be configured anyway, only I/O BASE values have to be
 113    configured with jumpers)
 114
 115    For some ununderstandable reason, the card default of irq 7, dma 1,
 116    don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
 117    HDD work, the kernel start to erupt out a lot of messages like:
 118
 119    'Sound: DMA timed out - IRQ/DRQ config error?'
 120
 121    For what I can say, I have NOT any conflict at irq 7 (under linux I'm
 122    using the lp polling driver), and dma line 1 is unused as stated by
 123    /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
 124    I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
 125    Anyway a setting of irq 10, dma 3 works really fine.
 126
 127    NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
 128    the emulation mode, all the installed hardware and the hardware
 129    configuration (irq and dma settings of all the hardware).
 130
 131    This init module should work with SBPRO+MSS, when one of the two is
 132    the AEDSP16 emulation and the other the real card. (see [1])
 133    For example:
 134
 135    AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
 136    AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
 137
 138    MPU401 should work. (see [2])
 139
 140    [1]
 141        ---
 142        Date: Mon, 29 Jul 1997 08:35:40 +0100
 143        From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
 144
 145        [...]
 146        Just to let you know got my Audio Excel (emulating a MSS) working
 147        with my original SB16, thanks for the driver!
 148        [...]
 149        ---
 150
 151    [2] Not tested by me for lack of hardware.
 152
 153    TODO, WISHES AND TECH
 154
 155    - About I/O ports allocation -
 156
 157    Request the 2x0h region (port base) in any case if we are using this card.
 158
 159    NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
 160    port base region (see code) does not mean necessarily that we are emulating
 161    sbpro.  Even if this region is the sbpro I/O ports region, we use this
 162    region to access the control registers of the card, and if emulating
 163    sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
 164    registers are not used, in no way, to emulate an sbpro: they are
 165    used only for configuration purposes.
 166
 167    Started Fri Mar 17 16:13:18 MET 1995
 168
 169    v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c)
 170    - Initial code.
 171    v0.2 (ALPHA)
 172    - Cleanups.
 173    - Integrated with Linux voxware v 2.90-2 kernel sound driver.
 174    - SoundBlaster Pro mode configuration.
 175    - Microsoft Sound System mode configuration.
 176    - MPU-401 mode configuration.
 177    v0.3 (ALPHA)
 178    - Cleanups.
 179    - Rearranged the code to let aedsp16_init_board be more general.
 180    - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
 181    inclusion too. We rely on os.h
 182    - Used the  to get a variable
 183    len string (we are not sure about the len of Copyright string).
 184    This works with any SB and compatible.
 185    - Added the code to request_region at device init (should go in
 186    the main body of voxware).
 187    v0.4 (BETA)
 188    - Better configure.c patch for aedsp16 configuration (better
 189    logic of inclusion of AEDSP16 support)
 190    - Modified the conditional compilation to better support more than
 191    one sound card of the emulated type (read the NOTES above)
 192    - Moved the sb init routine from the attach to the very first
 193    probe in sb_card.c
 194    - Rearrangements and cleanups
 195    - Wiped out some unnecessary code and variables: this is kernel
 196    code so it is better save some TEXT and DATA
 197    - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
 198    I/O ports in any case because they are used to access the DSP
 199    configuration registers and we can not allow anyone to get them.
 200    v0.5
 201    - cleanups on comments
 202    - prep for diffs against v3.0-proto-950402
 203    v0.6
 204    - removed the request_region()s when compiling the MODULE sound.o
 205    because we are not allowed (by the actual voxware structure) to
 206    release_region()
 207    v0.7 (pre ALPHA, not distributed)
 208    - started porting this module to kernel 1.3.84. Dummy probe/attach
 209    routines.
 210    v0.8 (ALPHA)
 211    - attached all the init routines.
 212    v0.9 (BETA)
 213    - Integrated with linux-pre2.0.7
 214    - Integrated with configuration scripts.
 215    - Cleaned up and beautyfied the code.
 216    v0.9.9 (BETA)
 217    - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
 218      Now only the code configured is compiled in, with some memory saving.
 219    v0.9.10
 220    - Integration into the sound/lowlevel/ section of the sound driver.
 221    - Re-organized the code.
 222    v0.9.11 (not distributed)
 223    - Rewritten the init interface-routines to initialize the AEDSP16 in
 224      one shot.
 225    - More cosmetics.
 226    - SC-6600 support.
 227    - More soft/hard configuration.
 228    v0.9.12
 229    - Refined the v0.9.11 code with conditional compilation to distinguish
 230      between SC-6000 and SC-6600 code.
 231    v1.0.0
 232    - Prep for merging with OSS Lite and Linux kernel 2.1.13
 233    - Corrected a bug in request/check/release region calls (thanks to the
 234      new kernel exception handling).
 235    v1.1
 236    - Revamped for integration with new modularized sound drivers: to enhance
 237      the flexibility of modular version, I have removed all the conditional
 238      compilation for SBPRO, MPU and MSS code. Now it is all managed with
 239      the ae_config structure.
 240    v1.2
 241    - Module informations added.
 242    - Removed aedsp16_delay_10msec(), now using mdelay(10)
 243    - All data and funcs moved to .*.init section.
 244    v1.3
 245    Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
 246    - got rid of check_region
 247
 248    Known Problems:
 249    - Audio Excel DSP 16 III don't work with this driver.
 250
 251    Credits:
 252    Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
 253    lot in testing the 0.9.11 and 0.9.12 versions of this driver.
 254
 255  */
 256
 257
 258 #define VERSION "1.3"           /* Version of Audio Excel DSP 16 driver */
 259
 260 #undef  AEDSP16_DEBUG           /* Define this to 1 to enable debug code     */
 261 #undef  AEDSP16_DEBUG_MORE      /* Define this to 1 to enable more debug     */
 262 #undef  AEDSP16_INFO            /* Define this to 1 to enable info code      */
 263
 264 #if defined(AEDSP16_DEBUG)
 265 # define DBG(x)  printk x
 266 # if defined(AEDSP16_DEBUG_MORE)
 267 #  define DBG1(x) printk x
 268 # else
 269 #  define DBG1(x)
 270 # endif
 271 #else
 272 # define DBG(x)
 273 # define DBG1(x)
 274 #endif
 275
 276 /*
 277  * Misc definitions
 278  */
 279 #define TRUE    1
 280 #define FALSE   0
 281
 282 /*
 283  * Region Size for request/check/release region.
 284  */
 285 #define IOBASE_REGION_SIZE      0x10
 286
 287 /*
 288  * Hardware related defaults
 289  */
 290 #define DEF_AEDSP16_IOB 0x220   /* 0x220(default) 0x240                 */
 291 #define DEF_AEDSP16_IRQ 7       /* 5 7(default) 9 10 11                 */
 292 #define DEF_AEDSP16_MRQ 0       /* 5 7 9 10 0(default), 0 means disable */
 293 #define DEF_AEDSP16_DMA 1       /* 0 1(default) 3                       */
 294
 295 /*
 296  * Commands of AEDSP16's DSP (SBPRO+special).
 297  * Some of them are COMMAND_xx, in the future they may change.
 298  */
 299 #define WRITE_MDIRQ_CFG   0x50  /* Set M&I&DRQ mask (the real config)   */
 300 #define COMMAND_52        0x52  /*                                      */
 301 #define READ_HARD_CFG     0x58  /* Read Hardware Config (I/O base etc)  */
 302 #define COMMAND_5C        0x5c  /*                                      */
 303 #define COMMAND_60        0x60  /*                                      */
 304 #define COMMAND_66        0x66  /*                                      */
 305 #define COMMAND_6C        0x6c  /*                                      */
 306 #define COMMAND_6E        0x6e  /*                                      */
 307 #define COMMAND_88        0x88  /*                                      */
 308 #define DSP_INIT_MSS      0x8c  /* Enable Microsoft Sound System mode   */
 309 #define COMMAND_C5        0xc5  /*                                      */
 310 #define GET_DSP_VERSION   0xe1  /* Get DSP Version                      */
 311 #define GET_DSP_COPYRIGHT 0xe3  /* Get DSP Copyright                    */
 312
 313 /*
 314  * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
 315  * to have the actual I/O port.
 316  * Register permissions are:
 317  * (wo) == Write Only
 318  * (ro) == Read  Only
 319  * (w-) == Write
 320  * (r-) == Read
 321  */
 322 #define DSP_RESET    0x06       /* offset of DSP RESET             (wo) */
 323 #define DSP_READ     0x0a       /* offset of DSP READ              (ro) */
 324 #define DSP_WRITE    0x0c       /* offset of DSP WRITE             (w-) */
 325 #define DSP_COMMAND  0x0c       /* offset of DSP COMMAND           (w-) */
 326 #define DSP_STATUS   0x0c       /* offset of DSP STATUS            (r-) */
 327 #define DSP_DATAVAIL 0x0e       /* offset of DSP DATA AVAILABLE    (ro) */
 328
 329
 330 #define RETRY           10      /* Various retry values on I/O opera-   */
 331 #define STATUSRETRY   1000      /* tions. Sometimes we have to          */
 332 #define HARDRETRY   500000      /* wait for previous cmd to complete    */
 333
 334 /*
 335  * Size of character arrays that store name and version of sound card
 336  */
 337 #define CARDNAMELEN 15          /* Size of the card's name in chars     */
 338 #define CARDVERLEN  2           /* Size of the card's version in chars  */
 339
 340 #if defined(CONFIG_SC6600)
 341 /*
 342  * Bitmapped flags of hard configuration
 343  */
 344 /*
 345  * Decode macros (xl == low byte, xh = high byte)
 346  */
 347 #define IOBASE(xl)              ((xl & 0x01)?0x240:0x220)
 348 #define JOY(xl)                 (xl & 0x02)
 349 #define MPUADDR(xl)             (                       \
 350                                 (xl & 0x0C)?0x330:      \
 351                                 (xl & 0x08)?0x320:      \
 352                                 (xl & 0x04)?0x310:      \
 353                                                 0x300)
 354 #define WSSADDR(xl)             ((xl & 0x10)?0xE80:0x530)
 355 #define CDROM(xh)               (xh & 0x20)
 356 #define CDROMADDR(xh)           (((xh & 0x1F) << 4) + 0x200)
 357 /*
 358  * Encode macros
 359  */
 360 #define BLDIOBASE(xl, val) {            \
 361         xl &= ~0x01;                    \
 362         if (val == 0x240)               \
 363                 xl |= 0x01;             \
 364         }
 365 #define BLDJOY(xl, val) {               \
 366         xl &= ~0x02;                    \
 367         if (val == 1)                   \
 368                 xl |= 0x02;             \
 369         }
 370 #define BLDMPUADDR(xl, val) {           \
 371         xl &= ~0x0C;                    \
 372         switch (val) {                  \
 373                 case 0x330:             \
 374                         xl |= 0x0C;     \
 375                         break;          \
 376                 case 0x320:             \
 377                         xl |= 0x08;     \
 378                         break;          \
 379                 case 0x310:             \
 380                         xl |= 0x04;     \
 381                         break;          \
 382                 case 0x300:             \
 383                         xl |= 0x00;     \
 384                         break;          \
 385                 default:                \
 386                         xl |= 0x00;     \
 387                         break;          \
 388                 }                       \
 389         }
 390 #define BLDWSSADDR(xl, val) {           \
 391         xl &= ~0x10;                    \
 392         if (val == 0xE80)               \
 393                 xl |= 0x10;             \
 394         }
 395 #define BLDCDROM(xh, val) {             \
 396         xh &= ~0x20;                    \
 397         if (val == 1)                   \
 398                 xh |= 0x20;             \
 399         }
 400 #define BLDCDROMADDR(xh, val) {         \
 401         int tmp = val;                  \
 402         tmp -= 0x200;                   \
 403         tmp >>= 4;                      \
 404         tmp &= 0x1F;                    \
 405         xh |= tmp;                      \
 406         xh &= 0x7F;                     \
 407         xh |= 0x40;                     \
 408         }
 409 #endif /* CONFIG_SC6600 */
 410
 411 /*
 412  * Bit mapped flags for calling aedsp16_init_board(), and saving the current
 413  * emulation mode.
 414  */
 415 #define INIT_NONE   (0   )
 416 #define INIT_SBPRO  (1<<0)
 417 #define INIT_MSS    (1<<1)
 418 #define INIT_MPU401 (1<<2)
 419
 420 static int      soft_cfg __initdata = 0;        /* bitmapped config */
 421 static int      soft_cfg_mss __initdata = 0;    /* bitmapped mss config */
 422 static int      ver[CARDVERLEN] __initdata = {0, 0};    /* DSP Ver:
 423                                                    hi->ver[0] lo->ver[1] */
 424
 425 #if defined(CONFIG_SC6600)
 426 static int      hard_cfg[2]     /* lo<-hard_cfg[0] hi<-hard_cfg[1]      */
 427                      __initdata = { 0, 0};
 428 #endif /* CONFIG_SC6600 */
 429
 430 #if defined(CONFIG_SC6600)
 431 /* Decoded hard configuration */
 432 struct  d_hcfg {
 433         int iobase;
 434         int joystick;
 435         int mpubase;
 436         int wssbase;
 437         int cdrom;
 438         int cdrombase;
 439 };
 440
 441 static struct d_hcfg decoded_hcfg __initdata = {0, };
 442
 443 #endif /* CONFIG_SC6600 */
 444
 445 /* orVals contain the values to be or'ed                                */
 446 struct orVals {
 447         int     val;            /* irq|mirq|dma                         */
 448         int     or;             /* soft_cfg |= TheStruct.or             */
 449 };
 450
 451 /* aedsp16_info contain the audio card configuration                  */
 452 struct aedsp16_info {
 453         int base_io;            /* base I/O address for accessing card  */
 454         int irq;                /* irq value for DSP I/O                */
 455         int mpu_irq;            /* irq for mpu401 interface I/O         */
 456         int dma;                /* dma value for DSP I/O                */
 457         int mss_base;           /* base I/O for Microsoft Sound System  */
 458         int mpu_base;           /* base I/O for MPU-401 emulation       */
 459         int init;               /* Initialization status of the card    */
 460 };
 461
 462 /*
 463  * Magic values that the DSP will eat when configuring irq/mirq/dma
 464  */
 465 /* DSP IRQ conversion array             */
 466 static struct orVals orIRQ[] __initdata = {
 467         {0x05, 0x28},
 468         {0x07, 0x08},
 469         {0x09, 0x10},
 470         {0x0a, 0x18},
 471         {0x0b, 0x20},
 472         {0x00, 0x00}
 473 };
 474
 475 /* MPU-401 IRQ conversion array         */
 476 static struct orVals orMIRQ[] __initdata = {
 477         {0x05, 0x04},
 478         {0x07, 0x44},
 479         {0x09, 0x84},
 480         {0x0a, 0xc4},
 481         {0x00, 0x00}
 482 };
 483
 484 /* DMA Channels conversion array        */
 485 static struct orVals orDMA[] __initdata = {
 486         {0x00, 0x01},
 487         {0x01, 0x02},
 488         {0x03, 0x03},
 489         {0x00, 0x00}
 490 };
 491
 492 static struct aedsp16_info ae_config = {
 493         DEF_AEDSP16_IOB,
 494         DEF_AEDSP16_IRQ,
 495         DEF_AEDSP16_MRQ,
 496         DEF_AEDSP16_DMA,
 497         -1,
 498         -1,
 499         INIT_NONE
 500 };
 501
 502 /*
 503  * Buffers to store audio card informations
 504  */
 505 static char     DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
 506 static char     DSPVersion[CARDVERLEN + 1] __initdata = {0, };
 507
 508 static int __init aedsp16_wait_data(int port)
 509 {
 510         int             loop = STATUSRETRY;
 511         unsigned char   ret = 0;
 512
 513         DBG1(("aedsp16_wait_data (0x%x): ", port));
 514
 515         do {
 516                   ret = inb(port + DSP_DATAVAIL);
 517         /*
 518          * Wait for data available (bit 7 of ret == 1)
 519          */
 520           } while (!(ret & 0x80) && loop--);
 521
 522         if (ret & 0x80) {
 523                 DBG1(("success.\n"));
 524                 return TRUE;
 525         }
 526
 527         DBG1(("failure.\n"));
 528         return FALSE;
 529 }
 530
 531 static int __init aedsp16_read(int port)
 532 {
 533         int inbyte;
 534
 535         DBG(("    Read DSP Byte (0x%x): ", port));
 536
 537         if (aedsp16_wait_data(port) == FALSE) {
 538                 DBG(("failure.\n"));
 539                 return -1;
 540         }
 541
 542         inbyte = inb(port + DSP_READ);
 543
 544         DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
 545
 546         return inbyte;
 547 }
 548
 549 static int __init aedsp16_test_dsp(int port)
 550 {
 551         return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
 552 }
 553
 554 static int __init aedsp16_dsp_reset(int port)
 555 {
 556         /*
 557          * Reset DSP
 558          */
 559
 560         DBG(("Reset DSP:\n"));
 561
 562         outb(1, (port + DSP_RESET));
 563         udelay(10);
 564         outb(0, (port + DSP_RESET));
 565         udelay(10);
 566         udelay(10);
 567         if (aedsp16_test_dsp(port) == TRUE) {
 568                 DBG(("success.\n"));
 569                 return TRUE;
 570         } else
 571                 DBG(("failure.\n"));
 572         return FALSE;
 573 }
 574
 575 static int __init aedsp16_write(int port, int cmd)
 576 {
 577         unsigned char   ret;
 578         int             loop = HARDRETRY;
 579
 580         DBG(("    Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
 581
 582         do {
 583                 ret = inb(port + DSP_STATUS);
 584                 /*
 585                  * DSP ready to receive data if bit 7 of ret == 0
 586                  */
 587                 if (!(ret & 0x80)) {
 588                         outb(cmd, port + DSP_COMMAND);
 589                         DBG(("success.\n"));
 590                         return 0;
 591                 }
 592         } while (loop--);
 593
 594         DBG(("timeout.\n"));
 595         printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
 596
 597         return -1;
 598 }
 599
 600 #if defined(CONFIG_SC6600)
 601
 602 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
 603 void __init aedsp16_pinfo(void) {
 604         DBG(("\n Base address:  %x\n", decoded_hcfg.iobase));
 605         DBG((" Joystick    : %s present\n", decoded_hcfg.joystick?"":" not"));
 606         DBG((" WSS addr    :  %x\n", decoded_hcfg.wssbase));
 607         DBG((" MPU-401 addr:  %x\n", decoded_hcfg.mpubase));
 608         DBG((" CDROM       : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
 609         DBG((" CDROMADDR   :  %x\n\n", decoded_hcfg.cdrombase));
 610 }
 611 #endif
 612
 613 static void __init aedsp16_hard_decode(void) {
 614
 615         DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
 616
 617 /*
 618  * Decode Cfg Bytes.
 619  */
 620         decoded_hcfg.iobase     = IOBASE(hard_cfg[0]);
 621         decoded_hcfg.joystick   = JOY(hard_cfg[0]);
 622         decoded_hcfg.wssbase    = WSSADDR(hard_cfg[0]);
 623         decoded_hcfg.mpubase    = MPUADDR(hard_cfg[0]);
 624         decoded_hcfg.cdrom      = CDROM(hard_cfg[1]);
 625         decoded_hcfg.cdrombase  = CDROMADDR(hard_cfg[1]);
 626
 627 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
 628         printk(" Original sound card configuration:\n");
 629         aedsp16_pinfo();
 630 #endif
 631
 632 /*
 633  * Now set up the real kernel configuration.
 634  */
 635         decoded_hcfg.iobase     = ae_config.base_io;
 636         decoded_hcfg.wssbase    = ae_config.mss_base;
 637         decoded_hcfg.mpubase    = ae_config.mpu_base;
 638
 639 #if defined(CONFIG_SC6600_JOY)
 640         decoded_hcfg.joystick   = CONFIG_SC6600_JOY; /* Enable */
 641 #endif
 642 #if defined(CONFIG_SC6600_CDROM)
 643         decoded_hcfg.cdrom      = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
 644 #endif
 645 #if defined(CONFIG_SC6600_CDROMBASE)
 646         decoded_hcfg.cdrombase  = CONFIG_SC6600_CDROMBASE; /* 0 Disable */
 647 #endif
 648
 649 #if defined(AEDSP16_DEBUG)
 650         DBG((" New Values:\n"));
 651         aedsp16_pinfo();
 652 #endif
 653
 654         DBG(("success.\n"));
 655 }
 656
 657 static void __init aedsp16_hard_encode(void) {
 658
 659         DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
 660
 661         hard_cfg[0] = 0;
 662         hard_cfg[1] = 0;
 663
 664         hard_cfg[0] |= 0x20;
 665
 666         BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
 667         BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
 668         BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
 669         BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
 670         BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
 671         BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
 672
 673 #if defined(AEDSP16_DEBUG)
 674         aedsp16_pinfo();
 675 #endif
 676
 677         DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
 678         DBG(("success.\n"));
 679
 680 }
 681
 682 static int __init aedsp16_hard_write(int port) {
 683
 684         DBG(("aedsp16_hard_write:\n"));
 685
 686         if (aedsp16_write(port, COMMAND_6C)) {
 687                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
 688                 DBG(("failure.\n"));
 689                 return FALSE;
 690         }
 691         if (aedsp16_write(port, COMMAND_5C)) {
 692                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
 693                 DBG(("failure.\n"));
 694                 return FALSE;
 695         }
 696         if (aedsp16_write(port, hard_cfg[0])) {
 697                 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
 698                 DBG(("failure.\n"));
 699                 return FALSE;
 700         }
 701         if (aedsp16_write(port, hard_cfg[1])) {
 702                 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
 703                 DBG(("failure.\n"));
 704                 return FALSE;
 705         }
 706         if (aedsp16_write(port, COMMAND_C5)) {
 707                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
 708                 DBG(("failure.\n"));
 709                 return FALSE;
 710         }
 711
 712         DBG(("success.\n"));
 713
 714         return TRUE;
 715 }
 716
 717 static int __init aedsp16_hard_read(int port) {
 718
 719         DBG(("aedsp16_hard_read:\n"));
 720
 721         if (aedsp16_write(port, READ_HARD_CFG)) {
 722                 printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
 723                 DBG(("failure.\n"));
 724                 return FALSE;
 725         }
 726
 727         if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
 728                 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
 729                         READ_HARD_CFG);
 730                 DBG(("failure.\n"));
 731                 return FALSE;
 732         }
 733         if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
 734                 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
 735                         READ_HARD_CFG);
 736                 DBG(("failure.\n"));
 737                 return FALSE;
 738         }
 739         if (aedsp16_read(port) == -1) {
 740                 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
 741                         READ_HARD_CFG);
 742                 DBG(("failure.\n"));
 743                 return FALSE;
 744         }
 745
 746         DBG(("success.\n"));
 747
 748         return TRUE;
 749 }
 750
 751 static int __init aedsp16_ext_cfg_write(int port) {
 752
 753         int extcfg, val;
 754
 755         if (aedsp16_write(port, COMMAND_66)) {
 756                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
 757                 return FALSE;
 758         }
 759
 760         extcfg = 7;
 761         if (decoded_hcfg.cdrom != 2)
 762                 extcfg = 0x0F;
 763         if ((decoded_hcfg.cdrom == 4) ||
 764             (decoded_hcfg.cdrom == 3))
 765                 extcfg &= ~2;
 766         if (decoded_hcfg.cdrombase == 0)
 767                 extcfg &= ~2;
 768         if (decoded_hcfg.mpubase == 0)
 769                 extcfg &= ~1;
 770
 771         if (aedsp16_write(port, extcfg)) {
 772                 printk("[AEDSP16] Write extcfg: failed!\n");
 773                 return FALSE;
 774         }
 775         if (aedsp16_write(port, 0)) {
 776                 printk("[AEDSP16] Write extcfg: failed!\n");
 777                 return FALSE;
 778         }
 779         if (decoded_hcfg.cdrom == 3) {
 780                 if (aedsp16_write(port, COMMAND_52)) {
 781                         printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
 782                         return FALSE;
 783                 }
 784                 if ((val = aedsp16_read(port)) == -1) {
 785                         printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
 786                                         , COMMAND_52);
 787                         return FALSE;
 788                 }
 789                 val &= 0x7F;
 790                 if (aedsp16_write(port, COMMAND_60)) {
 791                         printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
 792                         return FALSE;
 793                 }
 794                 if (aedsp16_write(port, val)) {
 795                         printk("[AEDSP16] Write val: failed!\n");
 796                         return FALSE;
 797                 }
 798         }
 799
 800         return TRUE;
 801 }
 802
 803 #endif /* CONFIG_SC6600 */
 804
 805 static int __init aedsp16_cfg_write(int port) {
 806         if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
 807                 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
 808                 return FALSE;
 809         }
 810         if (aedsp16_write(port, soft_cfg)) {
 811                 printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
 812                 return FALSE;
 813         }
 814         return TRUE;
 815 }
 816
 817 static int __init aedsp16_init_mss(int port)
 818 {
 819         DBG(("aedsp16_init_mss:\n"));
 820
 821         mdelay(10);
 822
 823         if (aedsp16_write(port, DSP_INIT_MSS)) {
 824                 printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
 825                                 DSP_INIT_MSS);
 826                 DBG(("failure.\n"));
 827                 return FALSE;
 828         }
 829
 830         mdelay(10);
 831
 832         if (aedsp16_cfg_write(port) == FALSE)
 833                 return FALSE;
 834
 835         outb(soft_cfg_mss, ae_config.mss_base);
 836
 837         DBG(("success.\n"));
 838
 839         return TRUE;
 840 }
 841
 842 static int __init aedsp16_setup_board(int port) {
 843         int     loop = RETRY;
 844
 845 #if defined(CONFIG_SC6600)
 846         int     val = 0;
 847
 848         if (aedsp16_hard_read(port) == FALSE) {
 849                 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
 850                 return FALSE;
 851         }
 852
 853         if (aedsp16_write(port, COMMAND_52)) {
 854                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
 855                 return FALSE;
 856         }
 857
 858         if ((val = aedsp16_read(port)) == -1) {
 859                 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
 860                                 COMMAND_52);
 861                 return FALSE;
 862         }
 863 #endif
 864
 865         do {
 866                 if (aedsp16_write(port, COMMAND_88)) {
 867                         printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
 868                         return FALSE;
 869                 }
 870                 mdelay(10);
 871         } while ((aedsp16_wait_data(port) == FALSE) && loop--);
 872
 873         if (aedsp16_read(port) == -1) {
 874                 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
 875                                 COMMAND_88);
 876                 return FALSE;
 877         }
 878
 879 #if !defined(CONFIG_SC6600)
 880         if (aedsp16_write(port, COMMAND_5C)) {
 881                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
 882                 return FALSE;
 883         }
 884 #endif
 885
 886         if (aedsp16_cfg_write(port) == FALSE)
 887                 return FALSE;
 888
 889 #if defined(CONFIG_SC6600)
 890         if (aedsp16_write(port, COMMAND_60)) {
 891                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
 892                 return FALSE;
 893         }
 894         if (aedsp16_write(port, val)) {
 895                 printk("[AEDSP16] DATA 0x%x: failed!\n", val);
 896                 return FALSE;
 897         }
 898         if (aedsp16_write(port, COMMAND_6E)) {
 899                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
 900                 return FALSE;
 901         }
 902         if (aedsp16_write(port, ver[0])) {
 903                 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
 904                 return FALSE;
 905         }
 906         if (aedsp16_write(port, ver[1])) {
 907                 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
 908                 return FALSE;
 909         }
 910
 911         if (aedsp16_hard_write(port) == FALSE) {
 912                 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
 913                 return FALSE;
 914         }
 915
 916         if (aedsp16_write(port, COMMAND_5C)) {
 917                 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
 918                 return FALSE;
 919         }
 920
 921 #if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
 922         if (aedsp16_cfg_write(port) == FALSE)
 923                 return FALSE;
 924 #endif
 925
 926 #endif
 927
 928         return TRUE;
 929 }
 930
 931 static int __init aedsp16_stdcfg(int port) {
 932         if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
 933                 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
 934                 return FALSE;
 935         }
 936         /*
 937          * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
 938          */
 939         if (aedsp16_write(port, 0x0A)) {
 940                 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
 941                 return FALSE;
 942         }
 943         return TRUE;
 944 }
 945
 946 static int __init aedsp16_dsp_version(int port)
 947 {
 948         int             len = 0;
 949         int             ret;
 950
 951         DBG(("Get DSP Version:\n"));
 952
 953         if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
 954                 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
 955                 DBG(("failed.\n"));
 956                 return FALSE;
 957         }
 958
 959         do {
 960                 if ((ret = aedsp16_read(port)) == -1) {
 961                         DBG(("failed.\n"));
 962                         return FALSE;
 963                 }
 964         /*
 965          * We already know how many int are stored (2), so we know when the
 966          * string is finished.
 967          */
 968                 ver[len++] = ret;
 969           } while (len < CARDVERLEN);
 970         sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
 971
 972         DBG(("success.\n"));
 973
 974         return TRUE;
 975 }
 976
 977 static int __init aedsp16_dsp_copyright(int port)
 978 {
 979         int             len = 0;
 980         int             ret;
 981
 982         DBG(("Get DSP Copyright:\n"));
 983
 984         if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
 985                 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
 986                 DBG(("failed.\n"));
 987                 return FALSE;
 988         }
 989
 990         do {
 991                 if ((ret = aedsp16_read(port)) == -1) {
 992         /*
 993          * If no more data available, return to the caller, no error if len>0.
 994          * We have no other way to know when the string is finished.
 995          */
 996                         if (len)
 997                                 break;
 998                         else {
 999                                 DBG(("failed.\n"));
1000                                 return FALSE;
1001                         }
1002                 }
1003
1004                 DSPCopyright[len++] = ret;
1005
1006           } while (len < CARDNAMELEN);
1007
1008         DBG(("success.\n"));
1009
1010         return TRUE;
1011 }
1012
1013 static void __init aedsp16_init_tables(void)
1014 {
1015         int i = 0;
1016
1017         memset(DSPCopyright, 0, CARDNAMELEN + 1);
1018         memset(DSPVersion, 0, CARDVERLEN + 1);
1019
1020         for (i = 0; orIRQ[i].or; i++)
1021                 if (orIRQ[i].val == ae_config.irq) {
1022                         soft_cfg |= orIRQ[i].or;
1023                         soft_cfg_mss |= orIRQ[i].or;
1024                 }
1025
1026         for (i = 0; orMIRQ[i].or; i++)
1027                 if (orMIRQ[i].or == ae_config.mpu_irq)
1028                         soft_cfg |= orMIRQ[i].or;
1029
1030         for (i = 0; orDMA[i].or; i++)
1031                 if (orDMA[i].val == ae_config.dma) {
1032                         soft_cfg |= orDMA[i].or;
1033                         soft_cfg_mss |= orDMA[i].or;
1034                 }
1035 }
1036
1037 static int __init aedsp16_init_board(void)
1038 {
1039         aedsp16_init_tables();
1040
1041         if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
1042                 printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
1043                 return FALSE;
1044         }
1045         if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
1046                 printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
1047                 return FALSE;
1048         }
1049
1050         /*
1051          * My AEDSP16 card return SC-6000 in DSPCopyright, so
1052          * if we have something different, we have to be warned.
1053          */
1054         if (strcmp("SC-6000", DSPCopyright))
1055                 printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
1056
1057         if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
1058                 printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
1059                 return FALSE;
1060         }
1061
1062         if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
1063                 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
1064                 return FALSE;
1065         }
1066
1067 #if defined(CONFIG_SC6600)
1068         if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
1069                 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
1070                 return FALSE;
1071         }
1072
1073         aedsp16_hard_decode();
1074
1075         aedsp16_hard_encode();
1076
1077         if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
1078                 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
1079                 return FALSE;
1080         }
1081
1082         if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
1083                 printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
1084                 return FALSE;
1085         }
1086 #endif /* CONFIG_SC6600 */
1087
1088         if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
1089                 printk("[AEDSP16] aedsp16_setup_board: failed!\n");
1090                 return FALSE;
1091         }
1092
1093         if (ae_config.mss_base != -1) {
1094                 if (ae_config.init & INIT_MSS) {
1095                         if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
1096                                 printk("[AEDSP16] Can not initialize"
1097                                        "Microsoft Sound System mode.\n");
1098                                 return FALSE;
1099                         }
1100                 }
1101         }
1102
1103 #if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
1104
1105         printk("Audio Excel DSP 16 init v%s (%s %s) [",
1106                 VERSION, DSPCopyright,
1107                 DSPVersion);
1108
1109         if (ae_config.mpu_base != -1) {
1110                 if (ae_config.init & INIT_MPU401) {
1111                         printk("MPU401");
1112                         if ((ae_config.init & INIT_MSS) ||
1113                             (ae_config.init & INIT_SBPRO))
1114                                 printk(" ");
1115                 }
1116         }
1117
1118         if (ae_config.mss_base == -1) {
1119                 if (ae_config.init & INIT_SBPRO) {
1120                         printk("SBPro");
1121                         if (ae_config.init & INIT_MSS)
1122                                 printk(" ");
1123                 }
1124         }
1125
1126         if (ae_config.mss_base != -1)
1127                 if (ae_config.init & INIT_MSS)
1128                         printk("MSS");
1129
1130         printk("]\n");
1131 #endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
1132
1133         mdelay(10);
1134
1135         return TRUE;
1136 }
1137
1138 static int __init init_aedsp16_sb(void)
1139 {
1140         DBG(("init_aedsp16_sb: "));
1141
1142 /*
1143  * If the card is already init'ed MSS, we can not init it to SBPRO too
1144  * because the board can not emulate simultaneously MSS and SBPRO.
1145  */
1146         if (ae_config.init & INIT_MSS)
1147                 return FALSE;
1148         if (ae_config.init & INIT_SBPRO)
1149                 return FALSE;
1150
1151         ae_config.init |= INIT_SBPRO;
1152
1153         DBG(("done.\n"));
1154
1155         return TRUE;
1156 }
1157
1158 static void uninit_aedsp16_sb(void)
1159 {
1160         DBG(("uninit_aedsp16_sb: "));
1161
1162         ae_config.init &= ~INIT_SBPRO;
1163
1164         DBG(("done.\n"));
1165 }
1166
1167 static int __init init_aedsp16_mss(void)
1168 {
1169         DBG(("init_aedsp16_mss: "));
1170
1171 /*
1172  * If the card is already init'ed SBPRO, we can not init it to MSS too
1173  * because the board can not emulate simultaneously MSS and SBPRO.
1174  */
1175         if (ae_config.init & INIT_SBPRO)
1176                 return FALSE;
1177         if (ae_config.init & INIT_MSS)
1178                 return FALSE;
1179 /*
1180  * We must allocate the CONFIG_AEDSP16_BASE region too because these are the
1181  * I/O ports to access card's control registers.
1182  */
1183         if (!(ae_config.init & INIT_MPU401)) {
1184                 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1185                                 "aedsp16 (base)")) {
1186                         printk(
1187                         "AEDSP16 BASE I/O port region is already in use.\n");
1188                         return FALSE;
1189                 }
1190         }
1191
1192         ae_config.init |= INIT_MSS;
1193
1194         DBG(("done.\n"));
1195
1196         return TRUE;
1197 }
1198
1199 static void uninit_aedsp16_mss(void)
1200 {
1201         DBG(("uninit_aedsp16_mss: "));
1202
1203         if ((!(ae_config.init & INIT_MPU401)) &&
1204            (ae_config.init & INIT_MSS)) {
1205                 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1206                 DBG(("AEDSP16 base region released.\n"));
1207         }
1208
1209         ae_config.init &= ~INIT_MSS;
1210         DBG(("done.\n"));
1211 }
1212
1213 static int __init init_aedsp16_mpu(void)
1214 {
1215         DBG(("init_aedsp16_mpu: "));
1216
1217         if (ae_config.init & INIT_MPU401)
1218                 return FALSE;
1219
1220 /*
1221  * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O
1222  * ports to access card's control registers.
1223  */
1224         if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
1225                 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1226                                         "aedsp16 (base)")) {
1227                         printk(
1228                         "AEDSP16 BASE I/O port region is already in use.\n");
1229                         return FALSE;
1230                 }
1231         }
1232
1233         ae_config.init |= INIT_MPU401;
1234
1235         DBG(("done.\n"));
1236
1237         return TRUE;
1238 }
1239
1240 static void uninit_aedsp16_mpu(void)
1241 {
1242         DBG(("uninit_aedsp16_mpu: "));
1243
1244         if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
1245            (ae_config.init & INIT_MPU401)) {
1246                 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1247                 DBG(("AEDSP16 base region released.\n"));
1248         }
1249
1250         ae_config.init &= ~INIT_MPU401;
1251
1252         DBG(("done.\n"));
1253 }
1254
1255 static int __init init_aedsp16(void)
1256 {
1257         int initialized = FALSE;
1258
1259         DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
1260              ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
1261
1262         if (ae_config.mss_base == -1) {
1263                 if (init_aedsp16_sb() == FALSE) {
1264                         uninit_aedsp16_sb();
1265                 } else {
1266                         initialized = TRUE;
1267                 }
1268         }
1269
1270         if (ae_config.mpu_base != -1) {
1271                 if (init_aedsp16_mpu() == FALSE) {
1272                         uninit_aedsp16_mpu();
1273                 } else {
1274                         initialized = TRUE;
1275                 }
1276         }
1277
1278 /*
1279  * In the sequence of init routines, the MSS init MUST be the last!
1280  * This because of the special register programming the MSS mode needs.
1281  * A board reset would disable the MSS mode restoring the default SBPRO
1282  * mode.
1283  */
1284         if (ae_config.mss_base != -1) {
1285                 if (init_aedsp16_mss() == FALSE) {
1286                         uninit_aedsp16_mss();
1287                 } else {
1288                         initialized = TRUE;
1289                 }
1290         }
1291
1292         if (initialized)
1293                 initialized = aedsp16_init_board();
1294         return initialized;
1295 }
1296
1297 static void __exit uninit_aedsp16(void)
1298 {
1299         if (ae_config.mss_base != -1)
1300                 uninit_aedsp16_mss();
1301         else
1302                 uninit_aedsp16_sb();
1303         if (ae_config.mpu_base != -1)
1304                 uninit_aedsp16_mpu();
1305 }
1306
1307 static int __initdata io = -1;
1308 static int __initdata irq = -1;
1309 static int __initdata dma = -1;
1310 static int __initdata mpu_irq = -1;
1311 static int __initdata mss_base = -1;
1312 static int __initdata mpu_base = -1;
1313
1314 module_param(io, int, 0);
1315 MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
1316 module_param(irq, int, 0);
1317 MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
1318 module_param(dma, int, 0);
1319 MODULE_PARM_DESC(dma, "dma line (0 1 3)");
1320 module_param(mpu_irq, int, 0);
1321 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
1322 module_param(mss_base, int, 0);
1323 MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
1324 module_param(mpu_base, int, 0);
1325 MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
1326 MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
1327 MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
1328 MODULE_LICENSE("GPL");
1329
1330 static int __init do_init_aedsp16(void) {
1331         printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
1332         if (io == -1 || dma == -1 || irq == -1) {
1333                 printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
1334                 return -EINVAL;
1335         }
1336
1337         ae_config.base_io = io;
1338         ae_config.irq = irq;
1339         ae_config.dma = dma;
1340
1341         ae_config.mss_base = mss_base;
1342         ae_config.mpu_base = mpu_base;
1343         ae_config.mpu_irq = mpu_irq;
1344
1345         if (init_aedsp16() == FALSE) {
1346                 printk(KERN_ERR "aedsp16: initialization failed\n");
1347                 /*
1348                  * XXX
1349                  * What error should we return here ?
1350                  */
1351                 return -EINVAL;
1352         }
1353         return 0;
1354 }
1355
1356 static void __exit cleanup_aedsp16(void) {
1357         uninit_aedsp16();
1358 }
1359
1360 module_init(do_init_aedsp16);
1361 module_exit(cleanup_aedsp16);
1362
1363 #ifndef MODULE
1364 static int __init setup_aedsp16(char *str)
1365 {
1366         /* io, irq, dma, mss_io, mpu_io, mpu_irq */
1367         int ints[7];
1368
1369         str = get_options(str, ARRAY_SIZE(ints), ints);
1370
1371         io       = ints[1];
1372         irq      = ints[2];
1373         dma      = ints[3];
1374         mss_base = ints[4];
1375         mpu_base = ints[5];
1376         mpu_irq  = ints[6];
1377         return 1;
1378 }
1379
1380 __setup("aedsp16=", setup_aedsp16);
1381 #endif