2 * linux/drivers/char/ds1620.c: Dallas Semiconductors DS1620
3 * thermometer driver (as used in the Rebel.com NetWinder)
5 #include <linux/module.h>
6 #include <linux/miscdevice.h>
7 #include <linux/delay.h>
8 #include <linux/proc_fs.h>
9 #include <linux/capability.h>
10 #include <linux/init.h>
11 #include <linux/smp_lock.h>
13 #include <mach/hardware.h>
14 #include <asm/mach-types.h>
15 #include <asm/uaccess.h>
16 #include <asm/therm.h>
19 /* define for /proc interface */
20 #define THERM_USE_PROC
23 /* Definitions for DS1620 chip */
24 #define THERM_START_CONVERT 0xee
25 #define THERM_RESET 0xaf
26 #define THERM_READ_CONFIG 0xac
27 #define THERM_READ_TEMP 0xaa
28 #define THERM_READ_TL 0xa2
29 #define THERM_READ_TH 0xa1
30 #define THERM_WRITE_CONFIG 0x0c
31 #define THERM_WRITE_TL 0x02
32 #define THERM_WRITE_TH 0x01
37 static const char *fan_state
[] = { "off", "on", "on (hardwired)" };
40 * Start of NetWinder specifics
41 * Note! We have to hold the gpio lock with IRQs disabled over the
42 * whole of our transaction to the Dallas chip, since there is a
43 * chance that the WaveArtist driver could touch these bits to
44 * enable or disable the speaker.
46 extern unsigned int system_rev
;
48 static inline void netwinder_ds1620_set_clk(int clk
)
50 nw_gpio_modify_op(GPIO_DSCLK
, clk
? GPIO_DSCLK
: 0);
53 static inline void netwinder_ds1620_set_data(int dat
)
55 nw_gpio_modify_op(GPIO_DATA
, dat
? GPIO_DATA
: 0);
58 static inline int netwinder_ds1620_get_data(void)
60 return nw_gpio_read() & GPIO_DATA
;
63 static inline void netwinder_ds1620_set_data_dir(int dir
)
65 nw_gpio_modify_io(GPIO_DATA
, dir
? GPIO_DATA
: 0);
68 static inline void netwinder_ds1620_reset(void)
70 nw_cpld_modify(CPLD_DS_ENABLE
, 0);
71 nw_cpld_modify(CPLD_DS_ENABLE
, CPLD_DS_ENABLE
);
74 static inline void netwinder_lock(unsigned long *flags
)
76 spin_lock_irqsave(&nw_gpio_lock
, *flags
);
79 static inline void netwinder_unlock(unsigned long *flags
)
81 spin_unlock_irqrestore(&nw_gpio_lock
, *flags
);
84 static inline void netwinder_set_fan(int i
)
88 spin_lock_irqsave(&nw_gpio_lock
, flags
);
89 nw_gpio_modify_op(GPIO_FAN
, i
? GPIO_FAN
: 0);
90 spin_unlock_irqrestore(&nw_gpio_lock
, flags
);
93 static inline int netwinder_get_fan(void)
95 if ((system_rev
& 0xf000) == 0x4000)
98 return (nw_gpio_read() & GPIO_FAN
) ? FAN_ON
: FAN_OFF
;
102 * End of NetWinder specifics
105 static void ds1620_send_bits(int nr
, int value
)
109 for (i
= 0; i
< nr
; i
++) {
110 netwinder_ds1620_set_data(value
& 1);
111 netwinder_ds1620_set_clk(0);
113 netwinder_ds1620_set_clk(1);
120 static unsigned int ds1620_recv_bits(int nr
)
122 unsigned int value
= 0, mask
= 1;
125 netwinder_ds1620_set_data(0);
127 for (i
= 0; i
< nr
; i
++) {
128 netwinder_ds1620_set_clk(0);
131 if (netwinder_ds1620_get_data())
136 netwinder_ds1620_set_clk(1);
143 static void ds1620_out(int cmd
, int bits
, int value
)
147 netwinder_lock(&flags
);
148 netwinder_ds1620_set_clk(1);
149 netwinder_ds1620_set_data_dir(0);
150 netwinder_ds1620_reset();
154 ds1620_send_bits(8, cmd
);
156 ds1620_send_bits(bits
, value
);
160 netwinder_ds1620_reset();
161 netwinder_unlock(&flags
);
166 static unsigned int ds1620_in(int cmd
, int bits
)
171 netwinder_lock(&flags
);
172 netwinder_ds1620_set_clk(1);
173 netwinder_ds1620_set_data_dir(0);
174 netwinder_ds1620_reset();
178 ds1620_send_bits(8, cmd
);
180 netwinder_ds1620_set_data_dir(1);
181 value
= ds1620_recv_bits(bits
);
183 netwinder_ds1620_reset();
184 netwinder_unlock(&flags
);
189 static int cvt_9_to_int(unsigned int val
)
197 static void ds1620_write_state(struct therm
*therm
)
199 ds1620_out(THERM_WRITE_CONFIG
, 8, CFG_CPU
);
200 ds1620_out(THERM_WRITE_TL
, 9, therm
->lo
);
201 ds1620_out(THERM_WRITE_TH
, 9, therm
->hi
);
202 ds1620_out(THERM_START_CONVERT
, 0, 0);
205 static void ds1620_read_state(struct therm
*therm
)
207 therm
->lo
= cvt_9_to_int(ds1620_in(THERM_READ_TL
, 9));
208 therm
->hi
= cvt_9_to_int(ds1620_in(THERM_READ_TH
, 9));
211 static int ds1620_open(struct inode
*inode
, struct file
*file
)
214 return nonseekable_open(inode
, file
);
218 ds1620_read(struct file
*file
, char __user
*buf
, size_t count
, loff_t
*ptr
)
221 signed char cur_temp_degF
;
223 cur_temp
= cvt_9_to_int(ds1620_in(THERM_READ_TEMP
, 9)) >> 1;
225 /* convert to Fahrenheit, as per wdt.c */
226 cur_temp_degF
= (cur_temp
* 9) / 5 + 32;
228 if (copy_to_user(buf
, &cur_temp_degF
, 1))
235 ds1620_ioctl(struct inode
*inode
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
239 struct therm __user
*therm
;
244 uarg
.i
= (int __user
*)arg
;
247 case CMD_SET_THERMOSTATE
:
248 case CMD_SET_THERMOSTATE2
:
249 if (!capable(CAP_SYS_ADMIN
))
252 if (cmd
== CMD_SET_THERMOSTATE
) {
253 if (get_user(therm
.hi
, uarg
.i
))
255 therm
.lo
= therm
.hi
- 3;
257 if (copy_from_user(&therm
, uarg
.therm
, sizeof(therm
)))
264 ds1620_write_state(&therm
);
267 case CMD_GET_THERMOSTATE
:
268 case CMD_GET_THERMOSTATE2
:
269 ds1620_read_state(&therm
);
274 if (cmd
== CMD_GET_THERMOSTATE
) {
275 if (put_user(therm
.hi
, uarg
.i
))
278 if (copy_to_user(uarg
.therm
, &therm
, sizeof(therm
)))
283 case CMD_GET_TEMPERATURE
:
284 case CMD_GET_TEMPERATURE2
:
285 i
= cvt_9_to_int(ds1620_in(THERM_READ_TEMP
, 9));
287 if (cmd
== CMD_GET_TEMPERATURE
)
290 return put_user(i
, uarg
.i
) ? -EFAULT
: 0;
293 i
= ds1620_in(THERM_READ_CONFIG
, 8) & 0xe3;
295 return put_user(i
, uarg
.i
) ? -EFAULT
: 0;
298 i
= netwinder_get_fan();
300 return put_user(i
, uarg
.i
) ? -EFAULT
: 0;
303 if (!capable(CAP_SYS_ADMIN
))
306 if (get_user(i
, uarg
.i
))
309 netwinder_set_fan(i
);
319 #ifdef THERM_USE_PROC
321 proc_therm_ds1620_read(char *buf
, char **start
, off_t offset
,
322 int len
, int *eof
, void *unused
)
327 ds1620_read_state(&th
);
328 temp
= cvt_9_to_int(ds1620_in(THERM_READ_TEMP
, 9));
330 len
= sprintf(buf
, "Thermostat: HI %i.%i, LOW %i.%i; "
331 "temperature: %i.%i C, fan %s\n",
332 th
.hi
>> 1, th
.hi
& 1 ? 5 : 0,
333 th
.lo
>> 1, th
.lo
& 1 ? 5 : 0,
334 temp
>> 1, temp
& 1 ? 5 : 0,
335 fan_state
[netwinder_get_fan()]);
340 static struct proc_dir_entry
*proc_therm_ds1620
;
343 static const struct file_operations ds1620_fops
= {
344 .owner
= THIS_MODULE
,
347 .ioctl
= ds1620_ioctl
,
350 static struct miscdevice ds1620_miscdev
= {
356 static int __init
ds1620_init(void)
359 struct therm th
, th_start
;
361 if (!machine_is_netwinder())
364 ds1620_out(THERM_RESET
, 0, 0);
365 ds1620_out(THERM_WRITE_CONFIG
, 8, CFG_CPU
);
366 ds1620_out(THERM_START_CONVERT
, 0, 0);
369 * Trigger the fan to start by setting
370 * temperature high point low. This kicks
371 * the fan into action.
373 ds1620_read_state(&th
);
376 ds1620_write_state(&th_start
);
380 ds1620_write_state(&th
);
382 ret
= misc_register(&ds1620_miscdev
);
386 #ifdef THERM_USE_PROC
387 proc_therm_ds1620
= create_proc_entry("therm", 0, NULL
);
388 if (proc_therm_ds1620
)
389 proc_therm_ds1620
->read_proc
= proc_therm_ds1620_read
;
391 printk(KERN_ERR
"therm: unable to register /proc/therm\n");
394 ds1620_read_state(&th
);
395 ret
= cvt_9_to_int(ds1620_in(THERM_READ_TEMP
, 9));
397 printk(KERN_INFO
"Thermostat: high %i.%i, low %i.%i, "
398 "current %i.%i C, fan %s.\n",
399 th
.hi
>> 1, th
.hi
& 1 ? 5 : 0,
400 th
.lo
>> 1, th
.lo
& 1 ? 5 : 0,
401 ret
>> 1, ret
& 1 ? 5 : 0,
402 fan_state
[netwinder_get_fan()]);
407 static void __exit
ds1620_exit(void)
409 #ifdef THERM_USE_PROC
410 remove_proc_entry("therm", NULL
);
412 misc_deregister(&ds1620_miscdev
);
415 module_init(ds1620_init
);
416 module_exit(ds1620_exit
);
418 MODULE_LICENSE("GPL");