use generic_access_phys for /dev/mem mappings
[linux-2.6/mini2440.git] / include / asm-m68knommu / system.h
blob64c64432bbb80248c44ddfc34a6cc98beff938e1
1 #ifndef _M68KNOMMU_SYSTEM_H
2 #define _M68KNOMMU_SYSTEM_H
4 #include <linux/linkage.h>
5 #include <asm/segment.h>
6 #include <asm/entry.h>
8 /*
9 * switch_to(n) should switch tasks to task ptr, first checking that
10 * ptr isn't the current task, in which case it does nothing. This
11 * also clears the TS-flag if the task we switched to has used the
12 * math co-processor latest.
15 * switch_to() saves the extra registers, that are not saved
16 * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
17 * a0-a1. Some of these are used by schedule() and its predecessors
18 * and so we might get see unexpected behaviors when a task returns
19 * with unexpected register values.
21 * syscall stores these registers itself and none of them are used
22 * by syscall after the function in the syscall has been called.
24 * Beware that resume now expects *next to be in d1 and the offset of
25 * tss to be in a1. This saves a few instructions as we no longer have
26 * to push them onto the stack and read them back right after.
28 * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
30 * Changed 96/09/19 by Andreas Schwab
31 * pass prev in a0, next in a1, offset of tss in d1, and whether
32 * the mm structures are shared in d2 (to avoid atc flushing).
34 asmlinkage void resume(void);
35 #define switch_to(prev,next,last) \
36 { \
37 void *_last; \
38 __asm__ __volatile__( \
39 "movel %1, %%a0\n\t" \
40 "movel %2, %%a1\n\t" \
41 "jbsr resume\n\t" \
42 "movel %%d1, %0\n\t" \
43 : "=d" (_last) \
44 : "d" (prev), "d" (next) \
45 : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
46 (last) = _last; \
49 #ifdef CONFIG_COLDFIRE
50 #define local_irq_enable() __asm__ __volatile__ ( \
51 "move %/sr,%%d0\n\t" \
52 "andi.l #0xf8ff,%%d0\n\t" \
53 "move %%d0,%/sr\n" \
54 : /* no outputs */ \
55 : \
56 : "cc", "%d0", "memory")
57 #define local_irq_disable() __asm__ __volatile__ ( \
58 "move %/sr,%%d0\n\t" \
59 "ori.l #0x0700,%%d0\n\t" \
60 "move %%d0,%/sr\n" \
61 : /* no outputs */ \
62 : \
63 : "cc", "%d0", "memory")
64 /* For spinlocks etc */
65 #define local_irq_save(x) __asm__ __volatile__ ( \
66 "movew %%sr,%0\n\t" \
67 "movew #0x0700,%%d0\n\t" \
68 "or.l %0,%%d0\n\t" \
69 "movew %%d0,%/sr" \
70 : "=d" (x) \
71 : \
72 : "cc", "%d0", "memory")
73 #else
75 /* portable version */ /* FIXME - see entry.h*/
76 #define ALLOWINT 0xf8ff
78 #define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
79 #define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
80 #endif
82 #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
83 #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
85 /* For spinlocks etc */
86 #ifndef local_irq_save
87 #define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
88 #endif
90 #define irqs_disabled() \
91 ({ \
92 unsigned long flags; \
93 local_save_flags(flags); \
94 ((flags & 0x0700) == 0x0700); \
97 #define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
100 * Force strict CPU ordering.
101 * Not really required on m68k...
103 #define nop() asm volatile ("nop"::)
104 #define mb() asm volatile ("" : : :"memory")
105 #define rmb() asm volatile ("" : : :"memory")
106 #define wmb() asm volatile ("" : : :"memory")
107 #define set_mb(var, value) ({ (var) = (value); wmb(); })
109 #ifdef CONFIG_SMP
110 #define smp_mb() mb()
111 #define smp_rmb() rmb()
112 #define smp_wmb() wmb()
113 #define smp_read_barrier_depends() read_barrier_depends()
114 #else
115 #define smp_mb() barrier()
116 #define smp_rmb() barrier()
117 #define smp_wmb() barrier()
118 #define smp_read_barrier_depends() do { } while(0)
119 #endif
121 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
123 struct __xchg_dummy { unsigned long a[100]; };
124 #define __xg(x) ((volatile struct __xchg_dummy *)(x))
126 #ifndef CONFIG_RMW_INSNS
127 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
129 unsigned long tmp, flags;
131 local_irq_save(flags);
133 switch (size) {
134 case 1:
135 __asm__ __volatile__
136 ("moveb %2,%0\n\t"
137 "moveb %1,%2"
138 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
139 break;
140 case 2:
141 __asm__ __volatile__
142 ("movew %2,%0\n\t"
143 "movew %1,%2"
144 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
145 break;
146 case 4:
147 __asm__ __volatile__
148 ("movel %2,%0\n\t"
149 "movel %1,%2"
150 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
151 break;
153 local_irq_restore(flags);
154 return tmp;
156 #else
157 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
159 switch (size) {
160 case 1:
161 __asm__ __volatile__
162 ("moveb %2,%0\n\t"
163 "1:\n\t"
164 "casb %0,%1,%2\n\t"
165 "jne 1b"
166 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
167 break;
168 case 2:
169 __asm__ __volatile__
170 ("movew %2,%0\n\t"
171 "1:\n\t"
172 "casw %0,%1,%2\n\t"
173 "jne 1b"
174 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
175 break;
176 case 4:
177 __asm__ __volatile__
178 ("movel %2,%0\n\t"
179 "1:\n\t"
180 "casl %0,%1,%2\n\t"
181 "jne 1b"
182 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
183 break;
185 return x;
187 #endif
189 #include <asm-generic/cmpxchg-local.h>
192 * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
193 * them available.
195 #define cmpxchg_local(ptr, o, n) \
196 ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
197 (unsigned long)(n), sizeof(*(ptr))))
198 #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
200 #ifndef CONFIG_SMP
201 #include <asm-generic/cmpxchg.h>
202 #endif
204 #if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
205 defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
206 #define HARD_RESET_NOW() ({ \
207 local_irq_disable(); \
208 asm(" \
209 moveal #0x10c00000, %a0; \
210 moveb #0, 0xFFFFF300; \
211 moveal 0(%a0), %sp; \
212 moveal 4(%a0), %a0; \
213 jmp (%a0); \
214 "); \
216 #endif
218 #ifdef CONFIG_COLDFIRE
219 #if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
221 * Need to account for broken early mask of 5272 silicon. So don't
222 * jump through the original start address. Jump strait into the
223 * known start of the FLASH code.
225 #define HARD_RESET_NOW() ({ \
226 asm(" \
227 movew #0x2700, %sr; \
228 jmp 0xf0000400; \
229 "); \
231 #elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
232 defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
233 #define HARD_RESET_NOW() ({ \
234 asm(" \
235 movew #0x2700, %sr; \
236 moveal #0x10000044, %a0; \
237 movel #0xffffffff, (%a0); \
238 moveal #0x10000001, %a0; \
239 moveb #0x00, (%a0); \
240 moveal #0xf0000004, %a0; \
241 moveal (%a0), %a0; \
242 jmp (%a0); \
243 "); \
245 #elif defined(CONFIG_M5272)
247 * Retrieve the boot address in flash using CSBR0 and CSOR0
248 * find the reset vector at flash_address + 4 (e.g. 0x400)
249 * remap it in the flash's current location (e.g. 0xf0000400)
250 * and jump there.
252 #define HARD_RESET_NOW() ({ \
253 asm(" \
254 movew #0x2700, %%sr; \
255 move.l %0+0x40,%%d0; \
256 and.l %0+0x44,%%d0; \
257 andi.l #0xfffff000,%%d0; \
258 mov.l %%d0,%%a0; \
259 or.l 4(%%a0),%%d0; \
260 mov.l %%d0,%%a0; \
261 jmp (%%a0);" \
262 : /* No output */ \
263 : "o" (*(char *)MCF_MBAR) ); \
265 #elif defined(CONFIG_M528x)
267 * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
268 * that when set, resets the MCF528x.
270 #define HARD_RESET_NOW() \
271 ({ \
272 unsigned char volatile *reset; \
273 asm("move.w #0x2700, %sr"); \
274 reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \
275 while(1) \
276 *reset |= (0x01 << 7);\
278 #elif defined(CONFIG_M523x)
279 #define HARD_RESET_NOW() ({ \
280 asm(" \
281 movew #0x2700, %sr; \
282 movel #0x01000000, %sp; \
283 moveal #0x40110000, %a0; \
284 moveb #0x80, (%a0); \
285 "); \
287 #elif defined(CONFIG_M520x)
289 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register
290 * RCR), that when set, resets the MCF5208.
292 #define HARD_RESET_NOW() \
293 ({ \
294 unsigned char volatile *reset; \
295 asm("move.w #0x2700, %sr"); \
296 reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \
297 while(1) \
298 *reset |= 0x80; \
300 #else
301 #define HARD_RESET_NOW() ({ \
302 asm(" \
303 movew #0x2700, %sr; \
304 moveal #0x4, %a0; \
305 moveal (%a0), %a0; \
306 jmp (%a0); \
307 "); \
309 #endif
310 #endif
311 #define arch_align_stack(x) (x)
313 #endif /* _M68KNOMMU_SYSTEM_H */