4 * Copyright (C) 1991, 1992, 2002 Linus Torvalds
8 * Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95
10 * Removed a lot of unnecessary code and simplified things now that
11 * the buffer cache isn't our primary cache - Andrew Tridgell 12/96
13 * Speed up hash, lru, and free list operations. Use gfp() for allocating
14 * hash table, use SLAB cache for buffer heads. SMP threading. -DaveM
16 * Added 32k buffer block sizes - these are required older ARM systems. - RMK
18 * async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de>
21 #include <linux/config.h>
22 #include <linux/kernel.h>
23 #include <linux/syscalls.h>
26 #include <linux/percpu.h>
27 #include <linux/slab.h>
28 #include <linux/smp_lock.h>
29 #include <linux/capability.h>
30 #include <linux/blkdev.h>
31 #include <linux/file.h>
32 #include <linux/quotaops.h>
33 #include <linux/highmem.h>
34 #include <linux/module.h>
35 #include <linux/writeback.h>
36 #include <linux/hash.h>
37 #include <linux/suspend.h>
38 #include <linux/buffer_head.h>
39 #include <linux/bio.h>
40 #include <linux/notifier.h>
41 #include <linux/cpu.h>
42 #include <linux/bitops.h>
43 #include <linux/mpage.h>
44 #include <linux/bit_spinlock.h>
46 static int fsync_buffers_list(spinlock_t
*lock
, struct list_head
*list
);
47 static void invalidate_bh_lrus(void);
49 #define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)
52 init_buffer(struct buffer_head
*bh
, bh_end_io_t
*handler
, void *private)
54 bh
->b_end_io
= handler
;
55 bh
->b_private
= private;
58 static int sync_buffer(void *word
)
60 struct block_device
*bd
;
61 struct buffer_head
*bh
62 = container_of(word
, struct buffer_head
, b_state
);
67 blk_run_address_space(bd
->bd_inode
->i_mapping
);
72 void fastcall
__lock_buffer(struct buffer_head
*bh
)
74 wait_on_bit_lock(&bh
->b_state
, BH_Lock
, sync_buffer
,
75 TASK_UNINTERRUPTIBLE
);
77 EXPORT_SYMBOL(__lock_buffer
);
79 void fastcall
unlock_buffer(struct buffer_head
*bh
)
81 clear_buffer_locked(bh
);
82 smp_mb__after_clear_bit();
83 wake_up_bit(&bh
->b_state
, BH_Lock
);
87 * Block until a buffer comes unlocked. This doesn't stop it
88 * from becoming locked again - you have to lock it yourself
89 * if you want to preserve its state.
91 void __wait_on_buffer(struct buffer_head
* bh
)
93 wait_on_bit(&bh
->b_state
, BH_Lock
, sync_buffer
, TASK_UNINTERRUPTIBLE
);
97 __clear_page_buffers(struct page
*page
)
99 ClearPagePrivate(page
);
100 set_page_private(page
, 0);
101 page_cache_release(page
);
104 static void buffer_io_error(struct buffer_head
*bh
)
106 char b
[BDEVNAME_SIZE
];
108 printk(KERN_ERR
"Buffer I/O error on device %s, logical block %Lu\n",
109 bdevname(bh
->b_bdev
, b
),
110 (unsigned long long)bh
->b_blocknr
);
114 * Default synchronous end-of-IO handler.. Just mark it up-to-date and
115 * unlock the buffer. This is what ll_rw_block uses too.
117 void end_buffer_read_sync(struct buffer_head
*bh
, int uptodate
)
120 set_buffer_uptodate(bh
);
122 /* This happens, due to failed READA attempts. */
123 clear_buffer_uptodate(bh
);
129 void end_buffer_write_sync(struct buffer_head
*bh
, int uptodate
)
131 char b
[BDEVNAME_SIZE
];
134 set_buffer_uptodate(bh
);
136 if (!buffer_eopnotsupp(bh
) && printk_ratelimit()) {
138 printk(KERN_WARNING
"lost page write due to "
140 bdevname(bh
->b_bdev
, b
));
142 set_buffer_write_io_error(bh
);
143 clear_buffer_uptodate(bh
);
150 * Write out and wait upon all the dirty data associated with a block
151 * device via its mapping. Does not take the superblock lock.
153 int sync_blockdev(struct block_device
*bdev
)
158 ret
= filemap_write_and_wait(bdev
->bd_inode
->i_mapping
);
161 EXPORT_SYMBOL(sync_blockdev
);
164 * Write out and wait upon all dirty data associated with this
165 * superblock. Filesystem data as well as the underlying block
166 * device. Takes the superblock lock.
168 int fsync_super(struct super_block
*sb
)
170 sync_inodes_sb(sb
, 0);
173 if (sb
->s_dirt
&& sb
->s_op
->write_super
)
174 sb
->s_op
->write_super(sb
);
176 if (sb
->s_op
->sync_fs
)
177 sb
->s_op
->sync_fs(sb
, 1);
178 sync_blockdev(sb
->s_bdev
);
179 sync_inodes_sb(sb
, 1);
181 return sync_blockdev(sb
->s_bdev
);
185 * Write out and wait upon all dirty data associated with this
186 * device. Filesystem data as well as the underlying block
187 * device. Takes the superblock lock.
189 int fsync_bdev(struct block_device
*bdev
)
191 struct super_block
*sb
= get_super(bdev
);
193 int res
= fsync_super(sb
);
197 return sync_blockdev(bdev
);
201 * freeze_bdev -- lock a filesystem and force it into a consistent state
202 * @bdev: blockdevice to lock
204 * This takes the block device bd_mount_sem to make sure no new mounts
205 * happen on bdev until thaw_bdev() is called.
206 * If a superblock is found on this device, we take the s_umount semaphore
207 * on it to make sure nobody unmounts until the snapshot creation is done.
209 struct super_block
*freeze_bdev(struct block_device
*bdev
)
211 struct super_block
*sb
;
213 down(&bdev
->bd_mount_sem
);
214 sb
= get_super(bdev
);
215 if (sb
&& !(sb
->s_flags
& MS_RDONLY
)) {
216 sb
->s_frozen
= SB_FREEZE_WRITE
;
219 sync_inodes_sb(sb
, 0);
223 if (sb
->s_dirt
&& sb
->s_op
->write_super
)
224 sb
->s_op
->write_super(sb
);
227 if (sb
->s_op
->sync_fs
)
228 sb
->s_op
->sync_fs(sb
, 1);
230 sync_blockdev(sb
->s_bdev
);
231 sync_inodes_sb(sb
, 1);
233 sb
->s_frozen
= SB_FREEZE_TRANS
;
236 sync_blockdev(sb
->s_bdev
);
238 if (sb
->s_op
->write_super_lockfs
)
239 sb
->s_op
->write_super_lockfs(sb
);
243 return sb
; /* thaw_bdev releases s->s_umount and bd_mount_sem */
245 EXPORT_SYMBOL(freeze_bdev
);
248 * thaw_bdev -- unlock filesystem
249 * @bdev: blockdevice to unlock
250 * @sb: associated superblock
252 * Unlocks the filesystem and marks it writeable again after freeze_bdev().
254 void thaw_bdev(struct block_device
*bdev
, struct super_block
*sb
)
257 BUG_ON(sb
->s_bdev
!= bdev
);
259 if (sb
->s_op
->unlockfs
)
260 sb
->s_op
->unlockfs(sb
);
261 sb
->s_frozen
= SB_UNFROZEN
;
263 wake_up(&sb
->s_wait_unfrozen
);
267 up(&bdev
->bd_mount_sem
);
269 EXPORT_SYMBOL(thaw_bdev
);
272 * sync everything. Start out by waking pdflush, because that writes back
273 * all queues in parallel.
275 static void do_sync(unsigned long wait
)
278 sync_inodes(0); /* All mappings, inodes and their blockdevs */
280 sync_supers(); /* Write the superblocks */
281 sync_filesystems(0); /* Start syncing the filesystems */
282 sync_filesystems(wait
); /* Waitingly sync the filesystems */
283 sync_inodes(wait
); /* Mappings, inodes and blockdevs, again. */
285 printk("Emergency Sync complete\n");
286 if (unlikely(laptop_mode
))
287 laptop_sync_completion();
290 asmlinkage
long sys_sync(void)
296 void emergency_sync(void)
298 pdflush_operation(do_sync
, 0);
302 * Generic function to fsync a file.
304 * filp may be NULL if called via the msync of a vma.
307 int file_fsync(struct file
*filp
, struct dentry
*dentry
, int datasync
)
309 struct inode
* inode
= dentry
->d_inode
;
310 struct super_block
* sb
;
313 /* sync the inode to buffers */
314 ret
= write_inode_now(inode
, 0);
316 /* sync the superblock to buffers */
319 if (sb
->s_op
->write_super
)
320 sb
->s_op
->write_super(sb
);
323 /* .. finally sync the buffers to disk */
324 err
= sync_blockdev(sb
->s_bdev
);
330 static long do_fsync(unsigned int fd
, int datasync
)
333 struct address_space
*mapping
;
342 if (!file
->f_op
|| !file
->f_op
->fsync
) {
343 /* Why? We can still call filemap_fdatawrite */
347 mapping
= file
->f_mapping
;
349 current
->flags
|= PF_SYNCWRITE
;
350 ret
= filemap_fdatawrite(mapping
);
353 * We need to protect against concurrent writers,
354 * which could cause livelocks in fsync_buffers_list
356 mutex_lock(&mapping
->host
->i_mutex
);
357 err
= file
->f_op
->fsync(file
, file
->f_dentry
, datasync
);
360 mutex_unlock(&mapping
->host
->i_mutex
);
361 err
= filemap_fdatawait(mapping
);
364 current
->flags
&= ~PF_SYNCWRITE
;
372 asmlinkage
long sys_fsync(unsigned int fd
)
374 return do_fsync(fd
, 0);
377 asmlinkage
long sys_fdatasync(unsigned int fd
)
379 return do_fsync(fd
, 1);
383 * Various filesystems appear to want __find_get_block to be non-blocking.
384 * But it's the page lock which protects the buffers. To get around this,
385 * we get exclusion from try_to_free_buffers with the blockdev mapping's
388 * Hack idea: for the blockdev mapping, i_bufferlist_lock contention
389 * may be quite high. This code could TryLock the page, and if that
390 * succeeds, there is no need to take private_lock. (But if
391 * private_lock is contended then so is mapping->tree_lock).
393 static struct buffer_head
*
394 __find_get_block_slow(struct block_device
*bdev
, sector_t block
)
396 struct inode
*bd_inode
= bdev
->bd_inode
;
397 struct address_space
*bd_mapping
= bd_inode
->i_mapping
;
398 struct buffer_head
*ret
= NULL
;
400 struct buffer_head
*bh
;
401 struct buffer_head
*head
;
405 index
= block
>> (PAGE_CACHE_SHIFT
- bd_inode
->i_blkbits
);
406 page
= find_get_page(bd_mapping
, index
);
410 spin_lock(&bd_mapping
->private_lock
);
411 if (!page_has_buffers(page
))
413 head
= page_buffers(page
);
416 if (bh
->b_blocknr
== block
) {
421 if (!buffer_mapped(bh
))
423 bh
= bh
->b_this_page
;
424 } while (bh
!= head
);
426 /* we might be here because some of the buffers on this page are
427 * not mapped. This is due to various races between
428 * file io on the block device and getblk. It gets dealt with
429 * elsewhere, don't buffer_error if we had some unmapped buffers
432 printk("__find_get_block_slow() failed. "
433 "block=%llu, b_blocknr=%llu\n",
434 (unsigned long long)block
, (unsigned long long)bh
->b_blocknr
);
435 printk("b_state=0x%08lx, b_size=%u\n", bh
->b_state
, bh
->b_size
);
436 printk("device blocksize: %d\n", 1 << bd_inode
->i_blkbits
);
439 spin_unlock(&bd_mapping
->private_lock
);
440 page_cache_release(page
);
445 /* If invalidate_buffers() will trash dirty buffers, it means some kind
446 of fs corruption is going on. Trashing dirty data always imply losing
447 information that was supposed to be just stored on the physical layer
450 Thus invalidate_buffers in general usage is not allwowed to trash
451 dirty buffers. For example ioctl(FLSBLKBUF) expects dirty data to
452 be preserved. These buffers are simply skipped.
454 We also skip buffers which are still in use. For example this can
455 happen if a userspace program is reading the block device.
457 NOTE: In the case where the user removed a removable-media-disk even if
458 there's still dirty data not synced on disk (due a bug in the device driver
459 or due an error of the user), by not destroying the dirty buffers we could
460 generate corruption also on the next media inserted, thus a parameter is
461 necessary to handle this case in the most safe way possible (trying
462 to not corrupt also the new disk inserted with the data belonging to
463 the old now corrupted disk). Also for the ramdisk the natural thing
464 to do in order to release the ramdisk memory is to destroy dirty buffers.
466 These are two special cases. Normal usage imply the device driver
467 to issue a sync on the device (without waiting I/O completion) and
468 then an invalidate_buffers call that doesn't trash dirty buffers.
470 For handling cache coherency with the blkdev pagecache the 'update' case
471 is been introduced. It is needed to re-read from disk any pinned
472 buffer. NOTE: re-reading from disk is destructive so we can do it only
473 when we assume nobody is changing the buffercache under our I/O and when
474 we think the disk contains more recent information than the buffercache.
475 The update == 1 pass marks the buffers we need to update, the update == 2
476 pass does the actual I/O. */
477 void invalidate_bdev(struct block_device
*bdev
, int destroy_dirty_buffers
)
479 invalidate_bh_lrus();
481 * FIXME: what about destroy_dirty_buffers?
482 * We really want to use invalidate_inode_pages2() for
483 * that, but not until that's cleaned up.
485 invalidate_inode_pages(bdev
->bd_inode
->i_mapping
);
489 * Kick pdflush then try to free up some ZONE_NORMAL memory.
491 static void free_more_memory(void)
496 wakeup_pdflush(1024);
499 for_each_pgdat(pgdat
) {
500 zones
= pgdat
->node_zonelists
[gfp_zone(GFP_NOFS
)].zones
;
502 try_to_free_pages(zones
, GFP_NOFS
);
507 * I/O completion handler for block_read_full_page() - pages
508 * which come unlocked at the end of I/O.
510 static void end_buffer_async_read(struct buffer_head
*bh
, int uptodate
)
513 struct buffer_head
*first
;
514 struct buffer_head
*tmp
;
516 int page_uptodate
= 1;
518 BUG_ON(!buffer_async_read(bh
));
522 set_buffer_uptodate(bh
);
524 clear_buffer_uptodate(bh
);
525 if (printk_ratelimit())
531 * Be _very_ careful from here on. Bad things can happen if
532 * two buffer heads end IO at almost the same time and both
533 * decide that the page is now completely done.
535 first
= page_buffers(page
);
536 local_irq_save(flags
);
537 bit_spin_lock(BH_Uptodate_Lock
, &first
->b_state
);
538 clear_buffer_async_read(bh
);
542 if (!buffer_uptodate(tmp
))
544 if (buffer_async_read(tmp
)) {
545 BUG_ON(!buffer_locked(tmp
));
548 tmp
= tmp
->b_this_page
;
550 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
551 local_irq_restore(flags
);
554 * If none of the buffers had errors and they are all
555 * uptodate then we can set the page uptodate.
557 if (page_uptodate
&& !PageError(page
))
558 SetPageUptodate(page
);
563 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
564 local_irq_restore(flags
);
569 * Completion handler for block_write_full_page() - pages which are unlocked
570 * during I/O, and which have PageWriteback cleared upon I/O completion.
572 void end_buffer_async_write(struct buffer_head
*bh
, int uptodate
)
574 char b
[BDEVNAME_SIZE
];
576 struct buffer_head
*first
;
577 struct buffer_head
*tmp
;
580 BUG_ON(!buffer_async_write(bh
));
584 set_buffer_uptodate(bh
);
586 if (printk_ratelimit()) {
588 printk(KERN_WARNING
"lost page write due to "
590 bdevname(bh
->b_bdev
, b
));
592 set_bit(AS_EIO
, &page
->mapping
->flags
);
593 clear_buffer_uptodate(bh
);
597 first
= page_buffers(page
);
598 local_irq_save(flags
);
599 bit_spin_lock(BH_Uptodate_Lock
, &first
->b_state
);
601 clear_buffer_async_write(bh
);
603 tmp
= bh
->b_this_page
;
605 if (buffer_async_write(tmp
)) {
606 BUG_ON(!buffer_locked(tmp
));
609 tmp
= tmp
->b_this_page
;
611 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
612 local_irq_restore(flags
);
613 end_page_writeback(page
);
617 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
618 local_irq_restore(flags
);
623 * If a page's buffers are under async readin (end_buffer_async_read
624 * completion) then there is a possibility that another thread of
625 * control could lock one of the buffers after it has completed
626 * but while some of the other buffers have not completed. This
627 * locked buffer would confuse end_buffer_async_read() into not unlocking
628 * the page. So the absence of BH_Async_Read tells end_buffer_async_read()
629 * that this buffer is not under async I/O.
631 * The page comes unlocked when it has no locked buffer_async buffers
634 * PageLocked prevents anyone starting new async I/O reads any of
637 * PageWriteback is used to prevent simultaneous writeout of the same
640 * PageLocked prevents anyone from starting writeback of a page which is
641 * under read I/O (PageWriteback is only ever set against a locked page).
643 static void mark_buffer_async_read(struct buffer_head
*bh
)
645 bh
->b_end_io
= end_buffer_async_read
;
646 set_buffer_async_read(bh
);
649 void mark_buffer_async_write(struct buffer_head
*bh
)
651 bh
->b_end_io
= end_buffer_async_write
;
652 set_buffer_async_write(bh
);
654 EXPORT_SYMBOL(mark_buffer_async_write
);
658 * fs/buffer.c contains helper functions for buffer-backed address space's
659 * fsync functions. A common requirement for buffer-based filesystems is
660 * that certain data from the backing blockdev needs to be written out for
661 * a successful fsync(). For example, ext2 indirect blocks need to be
662 * written back and waited upon before fsync() returns.
664 * The functions mark_buffer_inode_dirty(), fsync_inode_buffers(),
665 * inode_has_buffers() and invalidate_inode_buffers() are provided for the
666 * management of a list of dependent buffers at ->i_mapping->private_list.
668 * Locking is a little subtle: try_to_free_buffers() will remove buffers
669 * from their controlling inode's queue when they are being freed. But
670 * try_to_free_buffers() will be operating against the *blockdev* mapping
671 * at the time, not against the S_ISREG file which depends on those buffers.
672 * So the locking for private_list is via the private_lock in the address_space
673 * which backs the buffers. Which is different from the address_space
674 * against which the buffers are listed. So for a particular address_space,
675 * mapping->private_lock does *not* protect mapping->private_list! In fact,
676 * mapping->private_list will always be protected by the backing blockdev's
679 * Which introduces a requirement: all buffers on an address_space's
680 * ->private_list must be from the same address_space: the blockdev's.
682 * address_spaces which do not place buffers at ->private_list via these
683 * utility functions are free to use private_lock and private_list for
684 * whatever they want. The only requirement is that list_empty(private_list)
685 * be true at clear_inode() time.
687 * FIXME: clear_inode should not call invalidate_inode_buffers(). The
688 * filesystems should do that. invalidate_inode_buffers() should just go
689 * BUG_ON(!list_empty).
691 * FIXME: mark_buffer_dirty_inode() is a data-plane operation. It should
692 * take an address_space, not an inode. And it should be called
693 * mark_buffer_dirty_fsync() to clearly define why those buffers are being
696 * FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the
697 * list if it is already on a list. Because if the buffer is on a list,
698 * it *must* already be on the right one. If not, the filesystem is being
699 * silly. This will save a ton of locking. But first we have to ensure
700 * that buffers are taken *off* the old inode's list when they are freed
701 * (presumably in truncate). That requires careful auditing of all
702 * filesystems (do it inside bforget()). It could also be done by bringing
707 * The buffer's backing address_space's private_lock must be held
709 static inline void __remove_assoc_queue(struct buffer_head
*bh
)
711 list_del_init(&bh
->b_assoc_buffers
);
714 int inode_has_buffers(struct inode
*inode
)
716 return !list_empty(&inode
->i_data
.private_list
);
720 * osync is designed to support O_SYNC io. It waits synchronously for
721 * all already-submitted IO to complete, but does not queue any new
722 * writes to the disk.
724 * To do O_SYNC writes, just queue the buffer writes with ll_rw_block as
725 * you dirty the buffers, and then use osync_inode_buffers to wait for
726 * completion. Any other dirty buffers which are not yet queued for
727 * write will not be flushed to disk by the osync.
729 static int osync_buffers_list(spinlock_t
*lock
, struct list_head
*list
)
731 struct buffer_head
*bh
;
737 list_for_each_prev(p
, list
) {
739 if (buffer_locked(bh
)) {
743 if (!buffer_uptodate(bh
))
755 * sync_mapping_buffers - write out and wait upon a mapping's "associated"
757 * @mapping: the mapping which wants those buffers written
759 * Starts I/O against the buffers at mapping->private_list, and waits upon
762 * Basically, this is a convenience function for fsync().
763 * @mapping is a file or directory which needs those buffers to be written for
764 * a successful fsync().
766 int sync_mapping_buffers(struct address_space
*mapping
)
768 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
770 if (buffer_mapping
== NULL
|| list_empty(&mapping
->private_list
))
773 return fsync_buffers_list(&buffer_mapping
->private_lock
,
774 &mapping
->private_list
);
776 EXPORT_SYMBOL(sync_mapping_buffers
);
779 * Called when we've recently written block `bblock', and it is known that
780 * `bblock' was for a buffer_boundary() buffer. This means that the block at
781 * `bblock + 1' is probably a dirty indirect block. Hunt it down and, if it's
782 * dirty, schedule it for IO. So that indirects merge nicely with their data.
784 void write_boundary_block(struct block_device
*bdev
,
785 sector_t bblock
, unsigned blocksize
)
787 struct buffer_head
*bh
= __find_get_block(bdev
, bblock
+ 1, blocksize
);
789 if (buffer_dirty(bh
))
790 ll_rw_block(WRITE
, 1, &bh
);
795 void mark_buffer_dirty_inode(struct buffer_head
*bh
, struct inode
*inode
)
797 struct address_space
*mapping
= inode
->i_mapping
;
798 struct address_space
*buffer_mapping
= bh
->b_page
->mapping
;
800 mark_buffer_dirty(bh
);
801 if (!mapping
->assoc_mapping
) {
802 mapping
->assoc_mapping
= buffer_mapping
;
804 if (mapping
->assoc_mapping
!= buffer_mapping
)
807 if (list_empty(&bh
->b_assoc_buffers
)) {
808 spin_lock(&buffer_mapping
->private_lock
);
809 list_move_tail(&bh
->b_assoc_buffers
,
810 &mapping
->private_list
);
811 spin_unlock(&buffer_mapping
->private_lock
);
814 EXPORT_SYMBOL(mark_buffer_dirty_inode
);
817 * Add a page to the dirty page list.
819 * It is a sad fact of life that this function is called from several places
820 * deeply under spinlocking. It may not sleep.
822 * If the page has buffers, the uptodate buffers are set dirty, to preserve
823 * dirty-state coherency between the page and the buffers. It the page does
824 * not have buffers then when they are later attached they will all be set
827 * The buffers are dirtied before the page is dirtied. There's a small race
828 * window in which a writepage caller may see the page cleanness but not the
829 * buffer dirtiness. That's fine. If this code were to set the page dirty
830 * before the buffers, a concurrent writepage caller could clear the page dirty
831 * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean
832 * page on the dirty page list.
834 * We use private_lock to lock against try_to_free_buffers while using the
835 * page's buffer list. Also use this to protect against clean buffers being
836 * added to the page after it was set dirty.
838 * FIXME: may need to call ->reservepage here as well. That's rather up to the
839 * address_space though.
841 int __set_page_dirty_buffers(struct page
*page
)
843 struct address_space
* const mapping
= page
->mapping
;
845 spin_lock(&mapping
->private_lock
);
846 if (page_has_buffers(page
)) {
847 struct buffer_head
*head
= page_buffers(page
);
848 struct buffer_head
*bh
= head
;
851 set_buffer_dirty(bh
);
852 bh
= bh
->b_this_page
;
853 } while (bh
!= head
);
855 spin_unlock(&mapping
->private_lock
);
857 if (!TestSetPageDirty(page
)) {
858 write_lock_irq(&mapping
->tree_lock
);
859 if (page
->mapping
) { /* Race with truncate? */
860 if (mapping_cap_account_dirty(mapping
))
861 inc_page_state(nr_dirty
);
862 radix_tree_tag_set(&mapping
->page_tree
,
864 PAGECACHE_TAG_DIRTY
);
866 write_unlock_irq(&mapping
->tree_lock
);
867 __mark_inode_dirty(mapping
->host
, I_DIRTY_PAGES
);
872 EXPORT_SYMBOL(__set_page_dirty_buffers
);
875 * Write out and wait upon a list of buffers.
877 * We have conflicting pressures: we want to make sure that all
878 * initially dirty buffers get waited on, but that any subsequently
879 * dirtied buffers don't. After all, we don't want fsync to last
880 * forever if somebody is actively writing to the file.
882 * Do this in two main stages: first we copy dirty buffers to a
883 * temporary inode list, queueing the writes as we go. Then we clean
884 * up, waiting for those writes to complete.
886 * During this second stage, any subsequent updates to the file may end
887 * up refiling the buffer on the original inode's dirty list again, so
888 * there is a chance we will end up with a buffer queued for write but
889 * not yet completed on that list. So, as a final cleanup we go through
890 * the osync code to catch these locked, dirty buffers without requeuing
891 * any newly dirty buffers for write.
893 static int fsync_buffers_list(spinlock_t
*lock
, struct list_head
*list
)
895 struct buffer_head
*bh
;
896 struct list_head tmp
;
899 INIT_LIST_HEAD(&tmp
);
902 while (!list_empty(list
)) {
903 bh
= BH_ENTRY(list
->next
);
904 list_del_init(&bh
->b_assoc_buffers
);
905 if (buffer_dirty(bh
) || buffer_locked(bh
)) {
906 list_add(&bh
->b_assoc_buffers
, &tmp
);
907 if (buffer_dirty(bh
)) {
911 * Ensure any pending I/O completes so that
912 * ll_rw_block() actually writes the current
913 * contents - it is a noop if I/O is still in
914 * flight on potentially older contents.
916 ll_rw_block(SWRITE
, 1, &bh
);
923 while (!list_empty(&tmp
)) {
924 bh
= BH_ENTRY(tmp
.prev
);
925 __remove_assoc_queue(bh
);
929 if (!buffer_uptodate(bh
))
936 err2
= osync_buffers_list(lock
, list
);
944 * Invalidate any and all dirty buffers on a given inode. We are
945 * probably unmounting the fs, but that doesn't mean we have already
946 * done a sync(). Just drop the buffers from the inode list.
948 * NOTE: we take the inode's blockdev's mapping's private_lock. Which
949 * assumes that all the buffers are against the blockdev. Not true
952 void invalidate_inode_buffers(struct inode
*inode
)
954 if (inode_has_buffers(inode
)) {
955 struct address_space
*mapping
= &inode
->i_data
;
956 struct list_head
*list
= &mapping
->private_list
;
957 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
959 spin_lock(&buffer_mapping
->private_lock
);
960 while (!list_empty(list
))
961 __remove_assoc_queue(BH_ENTRY(list
->next
));
962 spin_unlock(&buffer_mapping
->private_lock
);
967 * Remove any clean buffers from the inode's buffer list. This is called
968 * when we're trying to free the inode itself. Those buffers can pin it.
970 * Returns true if all buffers were removed.
972 int remove_inode_buffers(struct inode
*inode
)
976 if (inode_has_buffers(inode
)) {
977 struct address_space
*mapping
= &inode
->i_data
;
978 struct list_head
*list
= &mapping
->private_list
;
979 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
981 spin_lock(&buffer_mapping
->private_lock
);
982 while (!list_empty(list
)) {
983 struct buffer_head
*bh
= BH_ENTRY(list
->next
);
984 if (buffer_dirty(bh
)) {
988 __remove_assoc_queue(bh
);
990 spin_unlock(&buffer_mapping
->private_lock
);
996 * Create the appropriate buffers when given a page for data area and
997 * the size of each buffer.. Use the bh->b_this_page linked list to
998 * follow the buffers created. Return NULL if unable to create more
1001 * The retry flag is used to differentiate async IO (paging, swapping)
1002 * which may not fail from ordinary buffer allocations.
1004 struct buffer_head
*alloc_page_buffers(struct page
*page
, unsigned long size
,
1007 struct buffer_head
*bh
, *head
;
1013 while ((offset
-= size
) >= 0) {
1014 bh
= alloc_buffer_head(GFP_NOFS
);
1019 bh
->b_this_page
= head
;
1024 atomic_set(&bh
->b_count
, 0);
1027 /* Link the buffer to its page */
1028 set_bh_page(bh
, page
, offset
);
1030 bh
->b_end_io
= NULL
;
1034 * In case anything failed, we just free everything we got.
1040 head
= head
->b_this_page
;
1041 free_buffer_head(bh
);
1046 * Return failure for non-async IO requests. Async IO requests
1047 * are not allowed to fail, so we have to wait until buffer heads
1048 * become available. But we don't want tasks sleeping with
1049 * partially complete buffers, so all were released above.
1054 /* We're _really_ low on memory. Now we just
1055 * wait for old buffer heads to become free due to
1056 * finishing IO. Since this is an async request and
1057 * the reserve list is empty, we're sure there are
1058 * async buffer heads in use.
1063 EXPORT_SYMBOL_GPL(alloc_page_buffers
);
1066 link_dev_buffers(struct page
*page
, struct buffer_head
*head
)
1068 struct buffer_head
*bh
, *tail
;
1073 bh
= bh
->b_this_page
;
1075 tail
->b_this_page
= head
;
1076 attach_page_buffers(page
, head
);
1080 * Initialise the state of a blockdev page's buffers.
1083 init_page_buffers(struct page
*page
, struct block_device
*bdev
,
1084 sector_t block
, int size
)
1086 struct buffer_head
*head
= page_buffers(page
);
1087 struct buffer_head
*bh
= head
;
1088 int uptodate
= PageUptodate(page
);
1091 if (!buffer_mapped(bh
)) {
1092 init_buffer(bh
, NULL
, NULL
);
1094 bh
->b_blocknr
= block
;
1096 set_buffer_uptodate(bh
);
1097 set_buffer_mapped(bh
);
1100 bh
= bh
->b_this_page
;
1101 } while (bh
!= head
);
1105 * Create the page-cache page that contains the requested block.
1107 * This is user purely for blockdev mappings.
1109 static struct page
*
1110 grow_dev_page(struct block_device
*bdev
, sector_t block
,
1111 pgoff_t index
, int size
)
1113 struct inode
*inode
= bdev
->bd_inode
;
1115 struct buffer_head
*bh
;
1117 page
= find_or_create_page(inode
->i_mapping
, index
, GFP_NOFS
);
1121 if (!PageLocked(page
))
1124 if (page_has_buffers(page
)) {
1125 bh
= page_buffers(page
);
1126 if (bh
->b_size
== size
) {
1127 init_page_buffers(page
, bdev
, block
, size
);
1130 if (!try_to_free_buffers(page
))
1135 * Allocate some buffers for this page
1137 bh
= alloc_page_buffers(page
, size
, 0);
1142 * Link the page to the buffers and initialise them. Take the
1143 * lock to be atomic wrt __find_get_block(), which does not
1144 * run under the page lock.
1146 spin_lock(&inode
->i_mapping
->private_lock
);
1147 link_dev_buffers(page
, bh
);
1148 init_page_buffers(page
, bdev
, block
, size
);
1149 spin_unlock(&inode
->i_mapping
->private_lock
);
1155 page_cache_release(page
);
1160 * Create buffers for the specified block device block's page. If
1161 * that page was dirty, the buffers are set dirty also.
1163 * Except that's a bug. Attaching dirty buffers to a dirty
1164 * blockdev's page can result in filesystem corruption, because
1165 * some of those buffers may be aliases of filesystem data.
1166 * grow_dev_page() will go BUG() if this happens.
1169 grow_buffers(struct block_device
*bdev
, sector_t block
, int size
)
1178 } while ((size
<< sizebits
) < PAGE_SIZE
);
1180 index
= block
>> sizebits
;
1181 block
= index
<< sizebits
;
1183 /* Create a page with the proper size buffers.. */
1184 page
= grow_dev_page(bdev
, block
, index
, size
);
1188 page_cache_release(page
);
1192 static struct buffer_head
*
1193 __getblk_slow(struct block_device
*bdev
, sector_t block
, int size
)
1195 /* Size must be multiple of hard sectorsize */
1196 if (unlikely(size
& (bdev_hardsect_size(bdev
)-1) ||
1197 (size
< 512 || size
> PAGE_SIZE
))) {
1198 printk(KERN_ERR
"getblk(): invalid block size %d requested\n",
1200 printk(KERN_ERR
"hardsect size: %d\n",
1201 bdev_hardsect_size(bdev
));
1208 struct buffer_head
* bh
;
1210 bh
= __find_get_block(bdev
, block
, size
);
1214 if (!grow_buffers(bdev
, block
, size
))
1220 * The relationship between dirty buffers and dirty pages:
1222 * Whenever a page has any dirty buffers, the page's dirty bit is set, and
1223 * the page is tagged dirty in its radix tree.
1225 * At all times, the dirtiness of the buffers represents the dirtiness of
1226 * subsections of the page. If the page has buffers, the page dirty bit is
1227 * merely a hint about the true dirty state.
1229 * When a page is set dirty in its entirety, all its buffers are marked dirty
1230 * (if the page has buffers).
1232 * When a buffer is marked dirty, its page is dirtied, but the page's other
1235 * Also. When blockdev buffers are explicitly read with bread(), they
1236 * individually become uptodate. But their backing page remains not
1237 * uptodate - even if all of its buffers are uptodate. A subsequent
1238 * block_read_full_page() against that page will discover all the uptodate
1239 * buffers, will set the page uptodate and will perform no I/O.
1243 * mark_buffer_dirty - mark a buffer_head as needing writeout
1244 * @bh: the buffer_head to mark dirty
1246 * mark_buffer_dirty() will set the dirty bit against the buffer, then set its
1247 * backing page dirty, then tag the page as dirty in its address_space's radix
1248 * tree and then attach the address_space's inode to its superblock's dirty
1251 * mark_buffer_dirty() is atomic. It takes bh->b_page->mapping->private_lock,
1252 * mapping->tree_lock and the global inode_lock.
1254 void fastcall
mark_buffer_dirty(struct buffer_head
*bh
)
1256 if (!buffer_dirty(bh
) && !test_set_buffer_dirty(bh
))
1257 __set_page_dirty_nobuffers(bh
->b_page
);
1261 * Decrement a buffer_head's reference count. If all buffers against a page
1262 * have zero reference count, are clean and unlocked, and if the page is clean
1263 * and unlocked then try_to_free_buffers() may strip the buffers from the page
1264 * in preparation for freeing it (sometimes, rarely, buffers are removed from
1265 * a page but it ends up not being freed, and buffers may later be reattached).
1267 void __brelse(struct buffer_head
* buf
)
1269 if (atomic_read(&buf
->b_count
)) {
1273 printk(KERN_ERR
"VFS: brelse: Trying to free free buffer\n");
1278 * bforget() is like brelse(), except it discards any
1279 * potentially dirty data.
1281 void __bforget(struct buffer_head
*bh
)
1283 clear_buffer_dirty(bh
);
1284 if (!list_empty(&bh
->b_assoc_buffers
)) {
1285 struct address_space
*buffer_mapping
= bh
->b_page
->mapping
;
1287 spin_lock(&buffer_mapping
->private_lock
);
1288 list_del_init(&bh
->b_assoc_buffers
);
1289 spin_unlock(&buffer_mapping
->private_lock
);
1294 static struct buffer_head
*__bread_slow(struct buffer_head
*bh
)
1297 if (buffer_uptodate(bh
)) {
1302 bh
->b_end_io
= end_buffer_read_sync
;
1303 submit_bh(READ
, bh
);
1305 if (buffer_uptodate(bh
))
1313 * Per-cpu buffer LRU implementation. To reduce the cost of __find_get_block().
1314 * The bhs[] array is sorted - newest buffer is at bhs[0]. Buffers have their
1315 * refcount elevated by one when they're in an LRU. A buffer can only appear
1316 * once in a particular CPU's LRU. A single buffer can be present in multiple
1317 * CPU's LRUs at the same time.
1319 * This is a transparent caching front-end to sb_bread(), sb_getblk() and
1320 * sb_find_get_block().
1322 * The LRUs themselves only need locking against invalidate_bh_lrus. We use
1323 * a local interrupt disable for that.
1326 #define BH_LRU_SIZE 8
1329 struct buffer_head
*bhs
[BH_LRU_SIZE
];
1332 static DEFINE_PER_CPU(struct bh_lru
, bh_lrus
) = {{ NULL
}};
1335 #define bh_lru_lock() local_irq_disable()
1336 #define bh_lru_unlock() local_irq_enable()
1338 #define bh_lru_lock() preempt_disable()
1339 #define bh_lru_unlock() preempt_enable()
1342 static inline void check_irqs_on(void)
1344 #ifdef irqs_disabled
1345 BUG_ON(irqs_disabled());
1350 * The LRU management algorithm is dopey-but-simple. Sorry.
1352 static void bh_lru_install(struct buffer_head
*bh
)
1354 struct buffer_head
*evictee
= NULL
;
1359 lru
= &__get_cpu_var(bh_lrus
);
1360 if (lru
->bhs
[0] != bh
) {
1361 struct buffer_head
*bhs
[BH_LRU_SIZE
];
1367 for (in
= 0; in
< BH_LRU_SIZE
; in
++) {
1368 struct buffer_head
*bh2
= lru
->bhs
[in
];
1373 if (out
>= BH_LRU_SIZE
) {
1374 BUG_ON(evictee
!= NULL
);
1381 while (out
< BH_LRU_SIZE
)
1383 memcpy(lru
->bhs
, bhs
, sizeof(bhs
));
1392 * Look up the bh in this cpu's LRU. If it's there, move it to the head.
1394 static struct buffer_head
*
1395 lookup_bh_lru(struct block_device
*bdev
, sector_t block
, int size
)
1397 struct buffer_head
*ret
= NULL
;
1403 lru
= &__get_cpu_var(bh_lrus
);
1404 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1405 struct buffer_head
*bh
= lru
->bhs
[i
];
1407 if (bh
&& bh
->b_bdev
== bdev
&&
1408 bh
->b_blocknr
== block
&& bh
->b_size
== size
) {
1411 lru
->bhs
[i
] = lru
->bhs
[i
- 1];
1426 * Perform a pagecache lookup for the matching buffer. If it's there, refresh
1427 * it in the LRU and mark it as accessed. If it is not present then return
1430 struct buffer_head
*
1431 __find_get_block(struct block_device
*bdev
, sector_t block
, int size
)
1433 struct buffer_head
*bh
= lookup_bh_lru(bdev
, block
, size
);
1436 bh
= __find_get_block_slow(bdev
, block
);
1444 EXPORT_SYMBOL(__find_get_block
);
1447 * __getblk will locate (and, if necessary, create) the buffer_head
1448 * which corresponds to the passed block_device, block and size. The
1449 * returned buffer has its reference count incremented.
1451 * __getblk() cannot fail - it just keeps trying. If you pass it an
1452 * illegal block number, __getblk() will happily return a buffer_head
1453 * which represents the non-existent block. Very weird.
1455 * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
1456 * attempt is failing. FIXME, perhaps?
1458 struct buffer_head
*
1459 __getblk(struct block_device
*bdev
, sector_t block
, int size
)
1461 struct buffer_head
*bh
= __find_get_block(bdev
, block
, size
);
1465 bh
= __getblk_slow(bdev
, block
, size
);
1468 EXPORT_SYMBOL(__getblk
);
1471 * Do async read-ahead on a buffer..
1473 void __breadahead(struct block_device
*bdev
, sector_t block
, int size
)
1475 struct buffer_head
*bh
= __getblk(bdev
, block
, size
);
1477 ll_rw_block(READA
, 1, &bh
);
1481 EXPORT_SYMBOL(__breadahead
);
1484 * __bread() - reads a specified block and returns the bh
1485 * @bdev: the block_device to read from
1486 * @block: number of block
1487 * @size: size (in bytes) to read
1489 * Reads a specified block, and returns buffer head that contains it.
1490 * It returns NULL if the block was unreadable.
1492 struct buffer_head
*
1493 __bread(struct block_device
*bdev
, sector_t block
, int size
)
1495 struct buffer_head
*bh
= __getblk(bdev
, block
, size
);
1497 if (likely(bh
) && !buffer_uptodate(bh
))
1498 bh
= __bread_slow(bh
);
1501 EXPORT_SYMBOL(__bread
);
1504 * invalidate_bh_lrus() is called rarely - but not only at unmount.
1505 * This doesn't race because it runs in each cpu either in irq
1506 * or with preempt disabled.
1508 static void invalidate_bh_lru(void *arg
)
1510 struct bh_lru
*b
= &get_cpu_var(bh_lrus
);
1513 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1517 put_cpu_var(bh_lrus
);
1520 static void invalidate_bh_lrus(void)
1522 on_each_cpu(invalidate_bh_lru
, NULL
, 1, 1);
1525 void set_bh_page(struct buffer_head
*bh
,
1526 struct page
*page
, unsigned long offset
)
1529 if (offset
>= PAGE_SIZE
)
1531 if (PageHighMem(page
))
1533 * This catches illegal uses and preserves the offset:
1535 bh
->b_data
= (char *)(0 + offset
);
1537 bh
->b_data
= page_address(page
) + offset
;
1539 EXPORT_SYMBOL(set_bh_page
);
1542 * Called when truncating a buffer on a page completely.
1544 static void discard_buffer(struct buffer_head
* bh
)
1547 clear_buffer_dirty(bh
);
1549 clear_buffer_mapped(bh
);
1550 clear_buffer_req(bh
);
1551 clear_buffer_new(bh
);
1552 clear_buffer_delay(bh
);
1557 * try_to_release_page() - release old fs-specific metadata on a page
1559 * @page: the page which the kernel is trying to free
1560 * @gfp_mask: memory allocation flags (and I/O mode)
1562 * The address_space is to try to release any data against the page
1563 * (presumably at page->private). If the release was successful, return `1'.
1564 * Otherwise return zero.
1566 * The @gfp_mask argument specifies whether I/O may be performed to release
1567 * this page (__GFP_IO), and whether the call may block (__GFP_WAIT).
1569 * NOTE: @gfp_mask may go away, and this function may become non-blocking.
1571 int try_to_release_page(struct page
*page
, gfp_t gfp_mask
)
1573 struct address_space
* const mapping
= page
->mapping
;
1575 BUG_ON(!PageLocked(page
));
1576 if (PageWriteback(page
))
1579 if (mapping
&& mapping
->a_ops
->releasepage
)
1580 return mapping
->a_ops
->releasepage(page
, gfp_mask
);
1581 return try_to_free_buffers(page
);
1583 EXPORT_SYMBOL(try_to_release_page
);
1586 * block_invalidatepage - invalidate part of all of a buffer-backed page
1588 * @page: the page which is affected
1589 * @offset: the index of the truncation point
1591 * block_invalidatepage() is called when all or part of the page has become
1592 * invalidatedby a truncate operation.
1594 * block_invalidatepage() does not have to release all buffers, but it must
1595 * ensure that no dirty buffer is left outside @offset and that no I/O
1596 * is underway against any of the blocks which are outside the truncation
1597 * point. Because the caller is about to free (and possibly reuse) those
1600 int block_invalidatepage(struct page
*page
, unsigned long offset
)
1602 struct buffer_head
*head
, *bh
, *next
;
1603 unsigned int curr_off
= 0;
1606 BUG_ON(!PageLocked(page
));
1607 if (!page_has_buffers(page
))
1610 head
= page_buffers(page
);
1613 unsigned int next_off
= curr_off
+ bh
->b_size
;
1614 next
= bh
->b_this_page
;
1617 * is this block fully invalidated?
1619 if (offset
<= curr_off
)
1621 curr_off
= next_off
;
1623 } while (bh
!= head
);
1626 * We release buffers only if the entire page is being invalidated.
1627 * The get_block cached value has been unconditionally invalidated,
1628 * so real IO is not possible anymore.
1631 ret
= try_to_release_page(page
, 0);
1635 EXPORT_SYMBOL(block_invalidatepage
);
1637 int do_invalidatepage(struct page
*page
, unsigned long offset
)
1639 int (*invalidatepage
)(struct page
*, unsigned long);
1640 invalidatepage
= page
->mapping
->a_ops
->invalidatepage
;
1641 if (invalidatepage
== NULL
)
1642 invalidatepage
= block_invalidatepage
;
1643 return (*invalidatepage
)(page
, offset
);
1647 * We attach and possibly dirty the buffers atomically wrt
1648 * __set_page_dirty_buffers() via private_lock. try_to_free_buffers
1649 * is already excluded via the page lock.
1651 void create_empty_buffers(struct page
*page
,
1652 unsigned long blocksize
, unsigned long b_state
)
1654 struct buffer_head
*bh
, *head
, *tail
;
1656 head
= alloc_page_buffers(page
, blocksize
, 1);
1659 bh
->b_state
|= b_state
;
1661 bh
= bh
->b_this_page
;
1663 tail
->b_this_page
= head
;
1665 spin_lock(&page
->mapping
->private_lock
);
1666 if (PageUptodate(page
) || PageDirty(page
)) {
1669 if (PageDirty(page
))
1670 set_buffer_dirty(bh
);
1671 if (PageUptodate(page
))
1672 set_buffer_uptodate(bh
);
1673 bh
= bh
->b_this_page
;
1674 } while (bh
!= head
);
1676 attach_page_buffers(page
, head
);
1677 spin_unlock(&page
->mapping
->private_lock
);
1679 EXPORT_SYMBOL(create_empty_buffers
);
1682 * We are taking a block for data and we don't want any output from any
1683 * buffer-cache aliases starting from return from that function and
1684 * until the moment when something will explicitly mark the buffer
1685 * dirty (hopefully that will not happen until we will free that block ;-)
1686 * We don't even need to mark it not-uptodate - nobody can expect
1687 * anything from a newly allocated buffer anyway. We used to used
1688 * unmap_buffer() for such invalidation, but that was wrong. We definitely
1689 * don't want to mark the alias unmapped, for example - it would confuse
1690 * anyone who might pick it with bread() afterwards...
1692 * Also.. Note that bforget() doesn't lock the buffer. So there can
1693 * be writeout I/O going on against recently-freed buffers. We don't
1694 * wait on that I/O in bforget() - it's more efficient to wait on the I/O
1695 * only if we really need to. That happens here.
1697 void unmap_underlying_metadata(struct block_device
*bdev
, sector_t block
)
1699 struct buffer_head
*old_bh
;
1703 old_bh
= __find_get_block_slow(bdev
, block
);
1705 clear_buffer_dirty(old_bh
);
1706 wait_on_buffer(old_bh
);
1707 clear_buffer_req(old_bh
);
1711 EXPORT_SYMBOL(unmap_underlying_metadata
);
1714 * NOTE! All mapped/uptodate combinations are valid:
1716 * Mapped Uptodate Meaning
1718 * No No "unknown" - must do get_block()
1719 * No Yes "hole" - zero-filled
1720 * Yes No "allocated" - allocated on disk, not read in
1721 * Yes Yes "valid" - allocated and up-to-date in memory.
1723 * "Dirty" is valid only with the last case (mapped+uptodate).
1727 * While block_write_full_page is writing back the dirty buffers under
1728 * the page lock, whoever dirtied the buffers may decide to clean them
1729 * again at any time. We handle that by only looking at the buffer
1730 * state inside lock_buffer().
1732 * If block_write_full_page() is called for regular writeback
1733 * (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a
1734 * locked buffer. This only can happen if someone has written the buffer
1735 * directly, with submit_bh(). At the address_space level PageWriteback
1736 * prevents this contention from occurring.
1738 static int __block_write_full_page(struct inode
*inode
, struct page
*page
,
1739 get_block_t
*get_block
, struct writeback_control
*wbc
)
1743 sector_t last_block
;
1744 struct buffer_head
*bh
, *head
;
1745 int nr_underway
= 0;
1747 BUG_ON(!PageLocked(page
));
1749 last_block
= (i_size_read(inode
) - 1) >> inode
->i_blkbits
;
1751 if (!page_has_buffers(page
)) {
1752 create_empty_buffers(page
, 1 << inode
->i_blkbits
,
1753 (1 << BH_Dirty
)|(1 << BH_Uptodate
));
1757 * Be very careful. We have no exclusion from __set_page_dirty_buffers
1758 * here, and the (potentially unmapped) buffers may become dirty at
1759 * any time. If a buffer becomes dirty here after we've inspected it
1760 * then we just miss that fact, and the page stays dirty.
1762 * Buffers outside i_size may be dirtied by __set_page_dirty_buffers;
1763 * handle that here by just cleaning them.
1766 block
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
1767 head
= page_buffers(page
);
1771 * Get all the dirty buffers mapped to disk addresses and
1772 * handle any aliases from the underlying blockdev's mapping.
1775 if (block
> last_block
) {
1777 * mapped buffers outside i_size will occur, because
1778 * this page can be outside i_size when there is a
1779 * truncate in progress.
1782 * The buffer was zeroed by block_write_full_page()
1784 clear_buffer_dirty(bh
);
1785 set_buffer_uptodate(bh
);
1786 } else if (!buffer_mapped(bh
) && buffer_dirty(bh
)) {
1787 err
= get_block(inode
, block
, bh
, 1);
1790 if (buffer_new(bh
)) {
1791 /* blockdev mappings never come here */
1792 clear_buffer_new(bh
);
1793 unmap_underlying_metadata(bh
->b_bdev
,
1797 bh
= bh
->b_this_page
;
1799 } while (bh
!= head
);
1802 if (!buffer_mapped(bh
))
1805 * If it's a fully non-blocking write attempt and we cannot
1806 * lock the buffer then redirty the page. Note that this can
1807 * potentially cause a busy-wait loop from pdflush and kswapd
1808 * activity, but those code paths have their own higher-level
1811 if (wbc
->sync_mode
!= WB_SYNC_NONE
|| !wbc
->nonblocking
) {
1813 } else if (test_set_buffer_locked(bh
)) {
1814 redirty_page_for_writepage(wbc
, page
);
1817 if (test_clear_buffer_dirty(bh
)) {
1818 mark_buffer_async_write(bh
);
1822 } while ((bh
= bh
->b_this_page
) != head
);
1825 * The page and its buffers are protected by PageWriteback(), so we can
1826 * drop the bh refcounts early.
1828 BUG_ON(PageWriteback(page
));
1829 set_page_writeback(page
);
1832 struct buffer_head
*next
= bh
->b_this_page
;
1833 if (buffer_async_write(bh
)) {
1834 submit_bh(WRITE
, bh
);
1838 } while (bh
!= head
);
1843 if (nr_underway
== 0) {
1845 * The page was marked dirty, but the buffers were
1846 * clean. Someone wrote them back by hand with
1847 * ll_rw_block/submit_bh. A rare case.
1851 if (!buffer_uptodate(bh
)) {
1855 bh
= bh
->b_this_page
;
1856 } while (bh
!= head
);
1858 SetPageUptodate(page
);
1859 end_page_writeback(page
);
1861 * The page and buffer_heads can be released at any time from
1864 wbc
->pages_skipped
++; /* We didn't write this page */
1870 * ENOSPC, or some other error. We may already have added some
1871 * blocks to the file, so we need to write these out to avoid
1872 * exposing stale data.
1873 * The page is currently locked and not marked for writeback
1876 /* Recovery: lock and submit the mapped buffers */
1878 if (buffer_mapped(bh
) && buffer_dirty(bh
)) {
1880 mark_buffer_async_write(bh
);
1883 * The buffer may have been set dirty during
1884 * attachment to a dirty page.
1886 clear_buffer_dirty(bh
);
1888 } while ((bh
= bh
->b_this_page
) != head
);
1890 BUG_ON(PageWriteback(page
));
1891 set_page_writeback(page
);
1894 struct buffer_head
*next
= bh
->b_this_page
;
1895 if (buffer_async_write(bh
)) {
1896 clear_buffer_dirty(bh
);
1897 submit_bh(WRITE
, bh
);
1901 } while (bh
!= head
);
1905 static int __block_prepare_write(struct inode
*inode
, struct page
*page
,
1906 unsigned from
, unsigned to
, get_block_t
*get_block
)
1908 unsigned block_start
, block_end
;
1911 unsigned blocksize
, bbits
;
1912 struct buffer_head
*bh
, *head
, *wait
[2], **wait_bh
=wait
;
1914 BUG_ON(!PageLocked(page
));
1915 BUG_ON(from
> PAGE_CACHE_SIZE
);
1916 BUG_ON(to
> PAGE_CACHE_SIZE
);
1919 blocksize
= 1 << inode
->i_blkbits
;
1920 if (!page_has_buffers(page
))
1921 create_empty_buffers(page
, blocksize
, 0);
1922 head
= page_buffers(page
);
1924 bbits
= inode
->i_blkbits
;
1925 block
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- bbits
);
1927 for(bh
= head
, block_start
= 0; bh
!= head
|| !block_start
;
1928 block
++, block_start
=block_end
, bh
= bh
->b_this_page
) {
1929 block_end
= block_start
+ blocksize
;
1930 if (block_end
<= from
|| block_start
>= to
) {
1931 if (PageUptodate(page
)) {
1932 if (!buffer_uptodate(bh
))
1933 set_buffer_uptodate(bh
);
1938 clear_buffer_new(bh
);
1939 if (!buffer_mapped(bh
)) {
1940 err
= get_block(inode
, block
, bh
, 1);
1943 if (buffer_new(bh
)) {
1944 unmap_underlying_metadata(bh
->b_bdev
,
1946 if (PageUptodate(page
)) {
1947 set_buffer_uptodate(bh
);
1950 if (block_end
> to
|| block_start
< from
) {
1953 kaddr
= kmap_atomic(page
, KM_USER0
);
1957 if (block_start
< from
)
1958 memset(kaddr
+block_start
,
1959 0, from
-block_start
);
1960 flush_dcache_page(page
);
1961 kunmap_atomic(kaddr
, KM_USER0
);
1966 if (PageUptodate(page
)) {
1967 if (!buffer_uptodate(bh
))
1968 set_buffer_uptodate(bh
);
1971 if (!buffer_uptodate(bh
) && !buffer_delay(bh
) &&
1972 (block_start
< from
|| block_end
> to
)) {
1973 ll_rw_block(READ
, 1, &bh
);
1978 * If we issued read requests - let them complete.
1980 while(wait_bh
> wait
) {
1981 wait_on_buffer(*--wait_bh
);
1982 if (!buffer_uptodate(*wait_bh
))
1989 clear_buffer_new(bh
);
1990 } while ((bh
= bh
->b_this_page
) != head
);
1995 * Zero out any newly allocated blocks to avoid exposing stale
1996 * data. If BH_New is set, we know that the block was newly
1997 * allocated in the above loop.
2002 block_end
= block_start
+blocksize
;
2003 if (block_end
<= from
)
2005 if (block_start
>= to
)
2007 if (buffer_new(bh
)) {
2010 clear_buffer_new(bh
);
2011 kaddr
= kmap_atomic(page
, KM_USER0
);
2012 memset(kaddr
+block_start
, 0, bh
->b_size
);
2013 kunmap_atomic(kaddr
, KM_USER0
);
2014 set_buffer_uptodate(bh
);
2015 mark_buffer_dirty(bh
);
2018 block_start
= block_end
;
2019 bh
= bh
->b_this_page
;
2020 } while (bh
!= head
);
2024 static int __block_commit_write(struct inode
*inode
, struct page
*page
,
2025 unsigned from
, unsigned to
)
2027 unsigned block_start
, block_end
;
2030 struct buffer_head
*bh
, *head
;
2032 blocksize
= 1 << inode
->i_blkbits
;
2034 for(bh
= head
= page_buffers(page
), block_start
= 0;
2035 bh
!= head
|| !block_start
;
2036 block_start
=block_end
, bh
= bh
->b_this_page
) {
2037 block_end
= block_start
+ blocksize
;
2038 if (block_end
<= from
|| block_start
>= to
) {
2039 if (!buffer_uptodate(bh
))
2042 set_buffer_uptodate(bh
);
2043 mark_buffer_dirty(bh
);
2048 * If this is a partial write which happened to make all buffers
2049 * uptodate then we can optimize away a bogus readpage() for
2050 * the next read(). Here we 'discover' whether the page went
2051 * uptodate as a result of this (potentially partial) write.
2054 SetPageUptodate(page
);
2059 * Generic "read page" function for block devices that have the normal
2060 * get_block functionality. This is most of the block device filesystems.
2061 * Reads the page asynchronously --- the unlock_buffer() and
2062 * set/clear_buffer_uptodate() functions propagate buffer state into the
2063 * page struct once IO has completed.
2065 int block_read_full_page(struct page
*page
, get_block_t
*get_block
)
2067 struct inode
*inode
= page
->mapping
->host
;
2068 sector_t iblock
, lblock
;
2069 struct buffer_head
*bh
, *head
, *arr
[MAX_BUF_PER_PAGE
];
2070 unsigned int blocksize
;
2072 int fully_mapped
= 1;
2074 BUG_ON(!PageLocked(page
));
2075 blocksize
= 1 << inode
->i_blkbits
;
2076 if (!page_has_buffers(page
))
2077 create_empty_buffers(page
, blocksize
, 0);
2078 head
= page_buffers(page
);
2080 iblock
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2081 lblock
= (i_size_read(inode
)+blocksize
-1) >> inode
->i_blkbits
;
2087 if (buffer_uptodate(bh
))
2090 if (!buffer_mapped(bh
)) {
2094 if (iblock
< lblock
) {
2095 err
= get_block(inode
, iblock
, bh
, 0);
2099 if (!buffer_mapped(bh
)) {
2100 void *kaddr
= kmap_atomic(page
, KM_USER0
);
2101 memset(kaddr
+ i
* blocksize
, 0, blocksize
);
2102 flush_dcache_page(page
);
2103 kunmap_atomic(kaddr
, KM_USER0
);
2105 set_buffer_uptodate(bh
);
2109 * get_block() might have updated the buffer
2112 if (buffer_uptodate(bh
))
2116 } while (i
++, iblock
++, (bh
= bh
->b_this_page
) != head
);
2119 SetPageMappedToDisk(page
);
2123 * All buffers are uptodate - we can set the page uptodate
2124 * as well. But not if get_block() returned an error.
2126 if (!PageError(page
))
2127 SetPageUptodate(page
);
2132 /* Stage two: lock the buffers */
2133 for (i
= 0; i
< nr
; i
++) {
2136 mark_buffer_async_read(bh
);
2140 * Stage 3: start the IO. Check for uptodateness
2141 * inside the buffer lock in case another process reading
2142 * the underlying blockdev brought it uptodate (the sct fix).
2144 for (i
= 0; i
< nr
; i
++) {
2146 if (buffer_uptodate(bh
))
2147 end_buffer_async_read(bh
, 1);
2149 submit_bh(READ
, bh
);
2154 /* utility function for filesystems that need to do work on expanding
2155 * truncates. Uses prepare/commit_write to allow the filesystem to
2156 * deal with the hole.
2158 static int __generic_cont_expand(struct inode
*inode
, loff_t size
,
2159 pgoff_t index
, unsigned int offset
)
2161 struct address_space
*mapping
= inode
->i_mapping
;
2163 unsigned long limit
;
2167 limit
= current
->signal
->rlim
[RLIMIT_FSIZE
].rlim_cur
;
2168 if (limit
!= RLIM_INFINITY
&& size
> (loff_t
)limit
) {
2169 send_sig(SIGXFSZ
, current
, 0);
2172 if (size
> inode
->i_sb
->s_maxbytes
)
2176 page
= grab_cache_page(mapping
, index
);
2179 err
= mapping
->a_ops
->prepare_write(NULL
, page
, offset
, offset
);
2182 * ->prepare_write() may have instantiated a few blocks
2183 * outside i_size. Trim these off again.
2186 page_cache_release(page
);
2187 vmtruncate(inode
, inode
->i_size
);
2191 err
= mapping
->a_ops
->commit_write(NULL
, page
, offset
, offset
);
2194 page_cache_release(page
);
2201 int generic_cont_expand(struct inode
*inode
, loff_t size
)
2204 unsigned int offset
;
2206 offset
= (size
& (PAGE_CACHE_SIZE
- 1)); /* Within page */
2208 /* ugh. in prepare/commit_write, if from==to==start of block, we
2209 ** skip the prepare. make sure we never send an offset for the start
2212 if ((offset
& (inode
->i_sb
->s_blocksize
- 1)) == 0) {
2213 /* caller must handle this extra byte. */
2216 index
= size
>> PAGE_CACHE_SHIFT
;
2218 return __generic_cont_expand(inode
, size
, index
, offset
);
2221 int generic_cont_expand_simple(struct inode
*inode
, loff_t size
)
2223 loff_t pos
= size
- 1;
2224 pgoff_t index
= pos
>> PAGE_CACHE_SHIFT
;
2225 unsigned int offset
= (pos
& (PAGE_CACHE_SIZE
- 1)) + 1;
2227 /* prepare/commit_write can handle even if from==to==start of block. */
2228 return __generic_cont_expand(inode
, size
, index
, offset
);
2232 * For moronic filesystems that do not allow holes in file.
2233 * We may have to extend the file.
2236 int cont_prepare_write(struct page
*page
, unsigned offset
,
2237 unsigned to
, get_block_t
*get_block
, loff_t
*bytes
)
2239 struct address_space
*mapping
= page
->mapping
;
2240 struct inode
*inode
= mapping
->host
;
2241 struct page
*new_page
;
2245 unsigned blocksize
= 1 << inode
->i_blkbits
;
2248 while(page
->index
> (pgpos
= *bytes
>>PAGE_CACHE_SHIFT
)) {
2250 new_page
= grab_cache_page(mapping
, pgpos
);
2253 /* we might sleep */
2254 if (*bytes
>>PAGE_CACHE_SHIFT
!= pgpos
) {
2255 unlock_page(new_page
);
2256 page_cache_release(new_page
);
2259 zerofrom
= *bytes
& ~PAGE_CACHE_MASK
;
2260 if (zerofrom
& (blocksize
-1)) {
2261 *bytes
|= (blocksize
-1);
2264 status
= __block_prepare_write(inode
, new_page
, zerofrom
,
2265 PAGE_CACHE_SIZE
, get_block
);
2268 kaddr
= kmap_atomic(new_page
, KM_USER0
);
2269 memset(kaddr
+zerofrom
, 0, PAGE_CACHE_SIZE
-zerofrom
);
2270 flush_dcache_page(new_page
);
2271 kunmap_atomic(kaddr
, KM_USER0
);
2272 generic_commit_write(NULL
, new_page
, zerofrom
, PAGE_CACHE_SIZE
);
2273 unlock_page(new_page
);
2274 page_cache_release(new_page
);
2277 if (page
->index
< pgpos
) {
2278 /* completely inside the area */
2281 /* page covers the boundary, find the boundary offset */
2282 zerofrom
= *bytes
& ~PAGE_CACHE_MASK
;
2284 /* if we will expand the thing last block will be filled */
2285 if (to
> zerofrom
&& (zerofrom
& (blocksize
-1))) {
2286 *bytes
|= (blocksize
-1);
2290 /* starting below the boundary? Nothing to zero out */
2291 if (offset
<= zerofrom
)
2294 status
= __block_prepare_write(inode
, page
, zerofrom
, to
, get_block
);
2297 if (zerofrom
< offset
) {
2298 kaddr
= kmap_atomic(page
, KM_USER0
);
2299 memset(kaddr
+zerofrom
, 0, offset
-zerofrom
);
2300 flush_dcache_page(page
);
2301 kunmap_atomic(kaddr
, KM_USER0
);
2302 __block_commit_write(inode
, page
, zerofrom
, offset
);
2306 ClearPageUptodate(page
);
2310 ClearPageUptodate(new_page
);
2311 unlock_page(new_page
);
2312 page_cache_release(new_page
);
2317 int block_prepare_write(struct page
*page
, unsigned from
, unsigned to
,
2318 get_block_t
*get_block
)
2320 struct inode
*inode
= page
->mapping
->host
;
2321 int err
= __block_prepare_write(inode
, page
, from
, to
, get_block
);
2323 ClearPageUptodate(page
);
2327 int block_commit_write(struct page
*page
, unsigned from
, unsigned to
)
2329 struct inode
*inode
= page
->mapping
->host
;
2330 __block_commit_write(inode
,page
,from
,to
);
2334 int generic_commit_write(struct file
*file
, struct page
*page
,
2335 unsigned from
, unsigned to
)
2337 struct inode
*inode
= page
->mapping
->host
;
2338 loff_t pos
= ((loff_t
)page
->index
<< PAGE_CACHE_SHIFT
) + to
;
2339 __block_commit_write(inode
,page
,from
,to
);
2341 * No need to use i_size_read() here, the i_size
2342 * cannot change under us because we hold i_mutex.
2344 if (pos
> inode
->i_size
) {
2345 i_size_write(inode
, pos
);
2346 mark_inode_dirty(inode
);
2353 * nobh_prepare_write()'s prereads are special: the buffer_heads are freed
2354 * immediately, while under the page lock. So it needs a special end_io
2355 * handler which does not touch the bh after unlocking it.
2357 * Note: unlock_buffer() sort-of does touch the bh after unlocking it, but
2358 * a race there is benign: unlock_buffer() only use the bh's address for
2359 * hashing after unlocking the buffer, so it doesn't actually touch the bh
2362 static void end_buffer_read_nobh(struct buffer_head
*bh
, int uptodate
)
2365 set_buffer_uptodate(bh
);
2367 /* This happens, due to failed READA attempts. */
2368 clear_buffer_uptodate(bh
);
2374 * On entry, the page is fully not uptodate.
2375 * On exit the page is fully uptodate in the areas outside (from,to)
2377 int nobh_prepare_write(struct page
*page
, unsigned from
, unsigned to
,
2378 get_block_t
*get_block
)
2380 struct inode
*inode
= page
->mapping
->host
;
2381 const unsigned blkbits
= inode
->i_blkbits
;
2382 const unsigned blocksize
= 1 << blkbits
;
2383 struct buffer_head map_bh
;
2384 struct buffer_head
*read_bh
[MAX_BUF_PER_PAGE
];
2385 unsigned block_in_page
;
2386 unsigned block_start
;
2387 sector_t block_in_file
;
2392 int is_mapped_to_disk
= 1;
2395 if (PageMappedToDisk(page
))
2398 block_in_file
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- blkbits
);
2399 map_bh
.b_page
= page
;
2402 * We loop across all blocks in the page, whether or not they are
2403 * part of the affected region. This is so we can discover if the
2404 * page is fully mapped-to-disk.
2406 for (block_start
= 0, block_in_page
= 0;
2407 block_start
< PAGE_CACHE_SIZE
;
2408 block_in_page
++, block_start
+= blocksize
) {
2409 unsigned block_end
= block_start
+ blocksize
;
2414 if (block_start
>= to
)
2416 ret
= get_block(inode
, block_in_file
+ block_in_page
,
2420 if (!buffer_mapped(&map_bh
))
2421 is_mapped_to_disk
= 0;
2422 if (buffer_new(&map_bh
))
2423 unmap_underlying_metadata(map_bh
.b_bdev
,
2425 if (PageUptodate(page
))
2427 if (buffer_new(&map_bh
) || !buffer_mapped(&map_bh
)) {
2428 kaddr
= kmap_atomic(page
, KM_USER0
);
2429 if (block_start
< from
) {
2430 memset(kaddr
+block_start
, 0, from
-block_start
);
2433 if (block_end
> to
) {
2434 memset(kaddr
+ to
, 0, block_end
- to
);
2437 flush_dcache_page(page
);
2438 kunmap_atomic(kaddr
, KM_USER0
);
2441 if (buffer_uptodate(&map_bh
))
2442 continue; /* reiserfs does this */
2443 if (block_start
< from
|| block_end
> to
) {
2444 struct buffer_head
*bh
= alloc_buffer_head(GFP_NOFS
);
2450 bh
->b_state
= map_bh
.b_state
;
2451 atomic_set(&bh
->b_count
, 0);
2452 bh
->b_this_page
= NULL
;
2454 bh
->b_blocknr
= map_bh
.b_blocknr
;
2455 bh
->b_size
= blocksize
;
2456 bh
->b_data
= (char *)(long)block_start
;
2457 bh
->b_bdev
= map_bh
.b_bdev
;
2458 bh
->b_private
= NULL
;
2459 read_bh
[nr_reads
++] = bh
;
2464 struct buffer_head
*bh
;
2467 * The page is locked, so these buffers are protected from
2468 * any VM or truncate activity. Hence we don't need to care
2469 * for the buffer_head refcounts.
2471 for (i
= 0; i
< nr_reads
; i
++) {
2474 bh
->b_end_io
= end_buffer_read_nobh
;
2475 submit_bh(READ
, bh
);
2477 for (i
= 0; i
< nr_reads
; i
++) {
2480 if (!buffer_uptodate(bh
))
2482 free_buffer_head(bh
);
2489 if (is_mapped_to_disk
)
2490 SetPageMappedToDisk(page
);
2491 SetPageUptodate(page
);
2494 * Setting the page dirty here isn't necessary for the prepare_write
2495 * function - commit_write will do that. But if/when this function is
2496 * used within the pagefault handler to ensure that all mmapped pages
2497 * have backing space in the filesystem, we will need to dirty the page
2498 * if its contents were altered.
2501 set_page_dirty(page
);
2506 for (i
= 0; i
< nr_reads
; i
++) {
2508 free_buffer_head(read_bh
[i
]);
2512 * Error recovery is pretty slack. Clear the page and mark it dirty
2513 * so we'll later zero out any blocks which _were_ allocated.
2515 kaddr
= kmap_atomic(page
, KM_USER0
);
2516 memset(kaddr
, 0, PAGE_CACHE_SIZE
);
2517 kunmap_atomic(kaddr
, KM_USER0
);
2518 SetPageUptodate(page
);
2519 set_page_dirty(page
);
2522 EXPORT_SYMBOL(nobh_prepare_write
);
2524 int nobh_commit_write(struct file
*file
, struct page
*page
,
2525 unsigned from
, unsigned to
)
2527 struct inode
*inode
= page
->mapping
->host
;
2528 loff_t pos
= ((loff_t
)page
->index
<< PAGE_CACHE_SHIFT
) + to
;
2530 set_page_dirty(page
);
2531 if (pos
> inode
->i_size
) {
2532 i_size_write(inode
, pos
);
2533 mark_inode_dirty(inode
);
2537 EXPORT_SYMBOL(nobh_commit_write
);
2540 * nobh_writepage() - based on block_full_write_page() except
2541 * that it tries to operate without attaching bufferheads to
2544 int nobh_writepage(struct page
*page
, get_block_t
*get_block
,
2545 struct writeback_control
*wbc
)
2547 struct inode
* const inode
= page
->mapping
->host
;
2548 loff_t i_size
= i_size_read(inode
);
2549 const pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
2554 /* Is the page fully inside i_size? */
2555 if (page
->index
< end_index
)
2558 /* Is the page fully outside i_size? (truncate in progress) */
2559 offset
= i_size
& (PAGE_CACHE_SIZE
-1);
2560 if (page
->index
>= end_index
+1 || !offset
) {
2562 * The page may have dirty, unmapped buffers. For example,
2563 * they may have been added in ext3_writepage(). Make them
2564 * freeable here, so the page does not leak.
2567 /* Not really sure about this - do we need this ? */
2568 if (page
->mapping
->a_ops
->invalidatepage
)
2569 page
->mapping
->a_ops
->invalidatepage(page
, offset
);
2572 return 0; /* don't care */
2576 * The page straddles i_size. It must be zeroed out on each and every
2577 * writepage invocation because it may be mmapped. "A file is mapped
2578 * in multiples of the page size. For a file that is not a multiple of
2579 * the page size, the remaining memory is zeroed when mapped, and
2580 * writes to that region are not written out to the file."
2582 kaddr
= kmap_atomic(page
, KM_USER0
);
2583 memset(kaddr
+ offset
, 0, PAGE_CACHE_SIZE
- offset
);
2584 flush_dcache_page(page
);
2585 kunmap_atomic(kaddr
, KM_USER0
);
2587 ret
= mpage_writepage(page
, get_block
, wbc
);
2589 ret
= __block_write_full_page(inode
, page
, get_block
, wbc
);
2592 EXPORT_SYMBOL(nobh_writepage
);
2595 * This function assumes that ->prepare_write() uses nobh_prepare_write().
2597 int nobh_truncate_page(struct address_space
*mapping
, loff_t from
)
2599 struct inode
*inode
= mapping
->host
;
2600 unsigned blocksize
= 1 << inode
->i_blkbits
;
2601 pgoff_t index
= from
>> PAGE_CACHE_SHIFT
;
2602 unsigned offset
= from
& (PAGE_CACHE_SIZE
-1);
2605 struct address_space_operations
*a_ops
= mapping
->a_ops
;
2609 if ((offset
& (blocksize
- 1)) == 0)
2613 page
= grab_cache_page(mapping
, index
);
2617 to
= (offset
+ blocksize
) & ~(blocksize
- 1);
2618 ret
= a_ops
->prepare_write(NULL
, page
, offset
, to
);
2620 kaddr
= kmap_atomic(page
, KM_USER0
);
2621 memset(kaddr
+ offset
, 0, PAGE_CACHE_SIZE
- offset
);
2622 flush_dcache_page(page
);
2623 kunmap_atomic(kaddr
, KM_USER0
);
2624 set_page_dirty(page
);
2627 page_cache_release(page
);
2631 EXPORT_SYMBOL(nobh_truncate_page
);
2633 int block_truncate_page(struct address_space
*mapping
,
2634 loff_t from
, get_block_t
*get_block
)
2636 pgoff_t index
= from
>> PAGE_CACHE_SHIFT
;
2637 unsigned offset
= from
& (PAGE_CACHE_SIZE
-1);
2640 unsigned length
, pos
;
2641 struct inode
*inode
= mapping
->host
;
2643 struct buffer_head
*bh
;
2647 blocksize
= 1 << inode
->i_blkbits
;
2648 length
= offset
& (blocksize
- 1);
2650 /* Block boundary? Nothing to do */
2654 length
= blocksize
- length
;
2655 iblock
= (sector_t
)index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2657 page
= grab_cache_page(mapping
, index
);
2662 if (!page_has_buffers(page
))
2663 create_empty_buffers(page
, blocksize
, 0);
2665 /* Find the buffer that contains "offset" */
2666 bh
= page_buffers(page
);
2668 while (offset
>= pos
) {
2669 bh
= bh
->b_this_page
;
2675 if (!buffer_mapped(bh
)) {
2676 err
= get_block(inode
, iblock
, bh
, 0);
2679 /* unmapped? It's a hole - nothing to do */
2680 if (!buffer_mapped(bh
))
2684 /* Ok, it's mapped. Make sure it's up-to-date */
2685 if (PageUptodate(page
))
2686 set_buffer_uptodate(bh
);
2688 if (!buffer_uptodate(bh
) && !buffer_delay(bh
)) {
2690 ll_rw_block(READ
, 1, &bh
);
2692 /* Uhhuh. Read error. Complain and punt. */
2693 if (!buffer_uptodate(bh
))
2697 kaddr
= kmap_atomic(page
, KM_USER0
);
2698 memset(kaddr
+ offset
, 0, length
);
2699 flush_dcache_page(page
);
2700 kunmap_atomic(kaddr
, KM_USER0
);
2702 mark_buffer_dirty(bh
);
2707 page_cache_release(page
);
2713 * The generic ->writepage function for buffer-backed address_spaces
2715 int block_write_full_page(struct page
*page
, get_block_t
*get_block
,
2716 struct writeback_control
*wbc
)
2718 struct inode
* const inode
= page
->mapping
->host
;
2719 loff_t i_size
= i_size_read(inode
);
2720 const pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
2724 /* Is the page fully inside i_size? */
2725 if (page
->index
< end_index
)
2726 return __block_write_full_page(inode
, page
, get_block
, wbc
);
2728 /* Is the page fully outside i_size? (truncate in progress) */
2729 offset
= i_size
& (PAGE_CACHE_SIZE
-1);
2730 if (page
->index
>= end_index
+1 || !offset
) {
2732 * The page may have dirty, unmapped buffers. For example,
2733 * they may have been added in ext3_writepage(). Make them
2734 * freeable here, so the page does not leak.
2736 do_invalidatepage(page
, 0);
2738 return 0; /* don't care */
2742 * The page straddles i_size. It must be zeroed out on each and every
2743 * writepage invokation because it may be mmapped. "A file is mapped
2744 * in multiples of the page size. For a file that is not a multiple of
2745 * the page size, the remaining memory is zeroed when mapped, and
2746 * writes to that region are not written out to the file."
2748 kaddr
= kmap_atomic(page
, KM_USER0
);
2749 memset(kaddr
+ offset
, 0, PAGE_CACHE_SIZE
- offset
);
2750 flush_dcache_page(page
);
2751 kunmap_atomic(kaddr
, KM_USER0
);
2752 return __block_write_full_page(inode
, page
, get_block
, wbc
);
2755 sector_t
generic_block_bmap(struct address_space
*mapping
, sector_t block
,
2756 get_block_t
*get_block
)
2758 struct buffer_head tmp
;
2759 struct inode
*inode
= mapping
->host
;
2762 get_block(inode
, block
, &tmp
, 0);
2763 return tmp
.b_blocknr
;
2766 static int end_bio_bh_io_sync(struct bio
*bio
, unsigned int bytes_done
, int err
)
2768 struct buffer_head
*bh
= bio
->bi_private
;
2773 if (err
== -EOPNOTSUPP
) {
2774 set_bit(BIO_EOPNOTSUPP
, &bio
->bi_flags
);
2775 set_bit(BH_Eopnotsupp
, &bh
->b_state
);
2778 bh
->b_end_io(bh
, test_bit(BIO_UPTODATE
, &bio
->bi_flags
));
2783 int submit_bh(int rw
, struct buffer_head
* bh
)
2788 BUG_ON(!buffer_locked(bh
));
2789 BUG_ON(!buffer_mapped(bh
));
2790 BUG_ON(!bh
->b_end_io
);
2792 if (buffer_ordered(bh
) && (rw
== WRITE
))
2796 * Only clear out a write error when rewriting, should this
2797 * include WRITE_SYNC as well?
2799 if (test_set_buffer_req(bh
) && (rw
== WRITE
|| rw
== WRITE_BARRIER
))
2800 clear_buffer_write_io_error(bh
);
2803 * from here on down, it's all bio -- do the initial mapping,
2804 * submit_bio -> generic_make_request may further map this bio around
2806 bio
= bio_alloc(GFP_NOIO
, 1);
2808 bio
->bi_sector
= bh
->b_blocknr
* (bh
->b_size
>> 9);
2809 bio
->bi_bdev
= bh
->b_bdev
;
2810 bio
->bi_io_vec
[0].bv_page
= bh
->b_page
;
2811 bio
->bi_io_vec
[0].bv_len
= bh
->b_size
;
2812 bio
->bi_io_vec
[0].bv_offset
= bh_offset(bh
);
2816 bio
->bi_size
= bh
->b_size
;
2818 bio
->bi_end_io
= end_bio_bh_io_sync
;
2819 bio
->bi_private
= bh
;
2822 submit_bio(rw
, bio
);
2824 if (bio_flagged(bio
, BIO_EOPNOTSUPP
))
2832 * ll_rw_block: low-level access to block devices (DEPRECATED)
2833 * @rw: whether to %READ or %WRITE or %SWRITE or maybe %READA (readahead)
2834 * @nr: number of &struct buffer_heads in the array
2835 * @bhs: array of pointers to &struct buffer_head
2837 * ll_rw_block() takes an array of pointers to &struct buffer_heads, and
2838 * requests an I/O operation on them, either a %READ or a %WRITE. The third
2839 * %SWRITE is like %WRITE only we make sure that the *current* data in buffers
2840 * are sent to disk. The fourth %READA option is described in the documentation
2841 * for generic_make_request() which ll_rw_block() calls.
2843 * This function drops any buffer that it cannot get a lock on (with the
2844 * BH_Lock state bit) unless SWRITE is required, any buffer that appears to be
2845 * clean when doing a write request, and any buffer that appears to be
2846 * up-to-date when doing read request. Further it marks as clean buffers that
2847 * are processed for writing (the buffer cache won't assume that they are
2848 * actually clean until the buffer gets unlocked).
2850 * ll_rw_block sets b_end_io to simple completion handler that marks
2851 * the buffer up-to-date (if approriate), unlocks the buffer and wakes
2854 * All of the buffers must be for the same device, and must also be a
2855 * multiple of the current approved size for the device.
2857 void ll_rw_block(int rw
, int nr
, struct buffer_head
*bhs
[])
2861 for (i
= 0; i
< nr
; i
++) {
2862 struct buffer_head
*bh
= bhs
[i
];
2866 else if (test_set_buffer_locked(bh
))
2870 if (rw
== WRITE
|| rw
== SWRITE
) {
2871 if (test_clear_buffer_dirty(bh
)) {
2872 bh
->b_end_io
= end_buffer_write_sync
;
2873 submit_bh(WRITE
, bh
);
2877 if (!buffer_uptodate(bh
)) {
2878 bh
->b_end_io
= end_buffer_read_sync
;
2889 * For a data-integrity writeout, we need to wait upon any in-progress I/O
2890 * and then start new I/O and then wait upon it. The caller must have a ref on
2893 int sync_dirty_buffer(struct buffer_head
*bh
)
2897 WARN_ON(atomic_read(&bh
->b_count
) < 1);
2899 if (test_clear_buffer_dirty(bh
)) {
2901 bh
->b_end_io
= end_buffer_write_sync
;
2902 ret
= submit_bh(WRITE
, bh
);
2904 if (buffer_eopnotsupp(bh
)) {
2905 clear_buffer_eopnotsupp(bh
);
2908 if (!ret
&& !buffer_uptodate(bh
))
2917 * try_to_free_buffers() checks if all the buffers on this particular page
2918 * are unused, and releases them if so.
2920 * Exclusion against try_to_free_buffers may be obtained by either
2921 * locking the page or by holding its mapping's private_lock.
2923 * If the page is dirty but all the buffers are clean then we need to
2924 * be sure to mark the page clean as well. This is because the page
2925 * may be against a block device, and a later reattachment of buffers
2926 * to a dirty page will set *all* buffers dirty. Which would corrupt
2927 * filesystem data on the same device.
2929 * The same applies to regular filesystem pages: if all the buffers are
2930 * clean then we set the page clean and proceed. To do that, we require
2931 * total exclusion from __set_page_dirty_buffers(). That is obtained with
2934 * try_to_free_buffers() is non-blocking.
2936 static inline int buffer_busy(struct buffer_head
*bh
)
2938 return atomic_read(&bh
->b_count
) |
2939 (bh
->b_state
& ((1 << BH_Dirty
) | (1 << BH_Lock
)));
2943 drop_buffers(struct page
*page
, struct buffer_head
**buffers_to_free
)
2945 struct buffer_head
*head
= page_buffers(page
);
2946 struct buffer_head
*bh
;
2950 if (buffer_write_io_error(bh
) && page
->mapping
)
2951 set_bit(AS_EIO
, &page
->mapping
->flags
);
2952 if (buffer_busy(bh
))
2954 bh
= bh
->b_this_page
;
2955 } while (bh
!= head
);
2958 struct buffer_head
*next
= bh
->b_this_page
;
2960 if (!list_empty(&bh
->b_assoc_buffers
))
2961 __remove_assoc_queue(bh
);
2963 } while (bh
!= head
);
2964 *buffers_to_free
= head
;
2965 __clear_page_buffers(page
);
2971 int try_to_free_buffers(struct page
*page
)
2973 struct address_space
* const mapping
= page
->mapping
;
2974 struct buffer_head
*buffers_to_free
= NULL
;
2977 BUG_ON(!PageLocked(page
));
2978 if (PageWriteback(page
))
2981 if (mapping
== NULL
) { /* can this still happen? */
2982 ret
= drop_buffers(page
, &buffers_to_free
);
2986 spin_lock(&mapping
->private_lock
);
2987 ret
= drop_buffers(page
, &buffers_to_free
);
2990 * If the filesystem writes its buffers by hand (eg ext3)
2991 * then we can have clean buffers against a dirty page. We
2992 * clean the page here; otherwise later reattachment of buffers
2993 * could encounter a non-uptodate page, which is unresolvable.
2994 * This only applies in the rare case where try_to_free_buffers
2995 * succeeds but the page is not freed.
2997 clear_page_dirty(page
);
2999 spin_unlock(&mapping
->private_lock
);
3001 if (buffers_to_free
) {
3002 struct buffer_head
*bh
= buffers_to_free
;
3005 struct buffer_head
*next
= bh
->b_this_page
;
3006 free_buffer_head(bh
);
3008 } while (bh
!= buffers_to_free
);
3012 EXPORT_SYMBOL(try_to_free_buffers
);
3014 int block_sync_page(struct page
*page
)
3016 struct address_space
*mapping
;
3019 mapping
= page_mapping(page
);
3021 blk_run_backing_dev(mapping
->backing_dev_info
, page
);
3026 * There are no bdflush tunables left. But distributions are
3027 * still running obsolete flush daemons, so we terminate them here.
3029 * Use of bdflush() is deprecated and will be removed in a future kernel.
3030 * The `pdflush' kernel threads fully replace bdflush daemons and this call.
3032 asmlinkage
long sys_bdflush(int func
, long data
)
3034 static int msg_count
;
3036 if (!capable(CAP_SYS_ADMIN
))
3039 if (msg_count
< 5) {
3042 "warning: process `%s' used the obsolete bdflush"
3043 " system call\n", current
->comm
);
3044 printk(KERN_INFO
"Fix your initscripts?\n");
3053 * Buffer-head allocation
3055 static kmem_cache_t
*bh_cachep
;
3058 * Once the number of bh's in the machine exceeds this level, we start
3059 * stripping them in writeback.
3061 static int max_buffer_heads
;
3063 int buffer_heads_over_limit
;
3065 struct bh_accounting
{
3066 int nr
; /* Number of live bh's */
3067 int ratelimit
; /* Limit cacheline bouncing */
3070 static DEFINE_PER_CPU(struct bh_accounting
, bh_accounting
) = {0, 0};
3072 static void recalc_bh_state(void)
3077 if (__get_cpu_var(bh_accounting
).ratelimit
++ < 4096)
3079 __get_cpu_var(bh_accounting
).ratelimit
= 0;
3081 tot
+= per_cpu(bh_accounting
, i
).nr
;
3082 buffer_heads_over_limit
= (tot
> max_buffer_heads
);
3085 struct buffer_head
*alloc_buffer_head(gfp_t gfp_flags
)
3087 struct buffer_head
*ret
= kmem_cache_alloc(bh_cachep
, gfp_flags
);
3089 get_cpu_var(bh_accounting
).nr
++;
3091 put_cpu_var(bh_accounting
);
3095 EXPORT_SYMBOL(alloc_buffer_head
);
3097 void free_buffer_head(struct buffer_head
*bh
)
3099 BUG_ON(!list_empty(&bh
->b_assoc_buffers
));
3100 kmem_cache_free(bh_cachep
, bh
);
3101 get_cpu_var(bh_accounting
).nr
--;
3103 put_cpu_var(bh_accounting
);
3105 EXPORT_SYMBOL(free_buffer_head
);
3108 init_buffer_head(void *data
, kmem_cache_t
*cachep
, unsigned long flags
)
3110 if ((flags
& (SLAB_CTOR_VERIFY
|SLAB_CTOR_CONSTRUCTOR
)) ==
3111 SLAB_CTOR_CONSTRUCTOR
) {
3112 struct buffer_head
* bh
= (struct buffer_head
*)data
;
3114 memset(bh
, 0, sizeof(*bh
));
3115 INIT_LIST_HEAD(&bh
->b_assoc_buffers
);
3119 #ifdef CONFIG_HOTPLUG_CPU
3120 static void buffer_exit_cpu(int cpu
)
3123 struct bh_lru
*b
= &per_cpu(bh_lrus
, cpu
);
3125 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
3131 static int buffer_cpu_notify(struct notifier_block
*self
,
3132 unsigned long action
, void *hcpu
)
3134 if (action
== CPU_DEAD
)
3135 buffer_exit_cpu((unsigned long)hcpu
);
3138 #endif /* CONFIG_HOTPLUG_CPU */
3140 void __init
buffer_init(void)
3144 bh_cachep
= kmem_cache_create("buffer_head",
3145 sizeof(struct buffer_head
), 0,
3146 SLAB_RECLAIM_ACCOUNT
|SLAB_PANIC
, init_buffer_head
, NULL
);
3149 * Limit the bh occupancy to 10% of ZONE_NORMAL
3151 nrpages
= (nr_free_buffer_pages() * 10) / 100;
3152 max_buffer_heads
= nrpages
* (PAGE_SIZE
/ sizeof(struct buffer_head
));
3153 hotcpu_notifier(buffer_cpu_notify
, 0);
3156 EXPORT_SYMBOL(__bforget
);
3157 EXPORT_SYMBOL(__brelse
);
3158 EXPORT_SYMBOL(__wait_on_buffer
);
3159 EXPORT_SYMBOL(block_commit_write
);
3160 EXPORT_SYMBOL(block_prepare_write
);
3161 EXPORT_SYMBOL(block_read_full_page
);
3162 EXPORT_SYMBOL(block_sync_page
);
3163 EXPORT_SYMBOL(block_truncate_page
);
3164 EXPORT_SYMBOL(block_write_full_page
);
3165 EXPORT_SYMBOL(cont_prepare_write
);
3166 EXPORT_SYMBOL(end_buffer_async_write
);
3167 EXPORT_SYMBOL(end_buffer_read_sync
);
3168 EXPORT_SYMBOL(end_buffer_write_sync
);
3169 EXPORT_SYMBOL(file_fsync
);
3170 EXPORT_SYMBOL(fsync_bdev
);
3171 EXPORT_SYMBOL(generic_block_bmap
);
3172 EXPORT_SYMBOL(generic_commit_write
);
3173 EXPORT_SYMBOL(generic_cont_expand
);
3174 EXPORT_SYMBOL(generic_cont_expand_simple
);
3175 EXPORT_SYMBOL(init_buffer
);
3176 EXPORT_SYMBOL(invalidate_bdev
);
3177 EXPORT_SYMBOL(ll_rw_block
);
3178 EXPORT_SYMBOL(mark_buffer_dirty
);
3179 EXPORT_SYMBOL(submit_bh
);
3180 EXPORT_SYMBOL(sync_dirty_buffer
);
3181 EXPORT_SYMBOL(unlock_buffer
);