1 /* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
3 * Copyright (c) 2006 - 2009 Broadcom Corporation
4 * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
5 * Copyright (c) 2007, 2008 Mike Christie
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation.
11 * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
16 static struct list_head adapter_list
= LIST_HEAD_INIT(adapter_list
);
17 static u32 adapter_count
;
18 static int bnx2i_reg_device
;
20 #define DRV_MODULE_NAME "bnx2i"
21 #define DRV_MODULE_VERSION "2.0.1d"
22 #define DRV_MODULE_RELDATE "Mar 25, 2009"
24 static char version
[] __devinitdata
=
25 "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
26 " v" DRV_MODULE_VERSION
" (" DRV_MODULE_RELDATE
")\n";
29 MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
30 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
31 MODULE_LICENSE("GPL");
32 MODULE_VERSION(DRV_MODULE_VERSION
);
34 static DEFINE_RWLOCK(bnx2i_dev_lock
);
36 unsigned int event_coal_div
= 1;
37 module_param(event_coal_div
, int, 0664);
38 MODULE_PARM_DESC(event_coal_div
, "Event Coalescing Divide Factor");
40 unsigned int en_tcp_dack
= 1;
41 module_param(en_tcp_dack
, int, 0664);
42 MODULE_PARM_DESC(en_tcp_dack
, "Enable TCP Delayed ACK");
44 unsigned int error_mask1
= 0x00;
45 module_param(error_mask1
, int, 0664);
46 MODULE_PARM_DESC(error_mask1
, "Config FW iSCSI Error Mask #1");
48 unsigned int error_mask2
= 0x00;
49 module_param(error_mask2
, int, 0664);
50 MODULE_PARM_DESC(error_mask2
, "Config FW iSCSI Error Mask #2");
53 module_param(sq_size
, int, 0664);
54 MODULE_PARM_DESC(sq_size
, "Configure SQ size");
56 unsigned int rq_size
= BNX2I_RQ_WQES_DEFAULT
;
57 module_param(rq_size
, int, 0664);
58 MODULE_PARM_DESC(rq_size
, "Configure RQ size");
60 u64 iscsi_error_mask
= 0x00;
62 static void bnx2i_unreg_one_device(struct bnx2i_hba
*hba
) ;
66 * bnx2i_identify_device - identifies NetXtreme II device type
67 * @hba: Adapter structure pointer
69 * This function identifies the NX2 device type and sets appropriate
70 * queue mailbox register access method, 5709 requires driver to
71 * access MBOX regs using *bin* mode
73 void bnx2i_identify_device(struct bnx2i_hba
*hba
)
75 hba
->cnic_dev_type
= 0;
76 if ((hba
->pci_did
== PCI_DEVICE_ID_NX2_5706
) ||
77 (hba
->pci_did
== PCI_DEVICE_ID_NX2_5706S
))
78 set_bit(BNX2I_NX2_DEV_5706
, &hba
->cnic_dev_type
);
79 else if ((hba
->pci_did
== PCI_DEVICE_ID_NX2_5708
) ||
80 (hba
->pci_did
== PCI_DEVICE_ID_NX2_5708S
))
81 set_bit(BNX2I_NX2_DEV_5708
, &hba
->cnic_dev_type
);
82 else if ((hba
->pci_did
== PCI_DEVICE_ID_NX2_5709
) ||
83 (hba
->pci_did
== PCI_DEVICE_ID_NX2_5709S
)) {
84 set_bit(BNX2I_NX2_DEV_5709
, &hba
->cnic_dev_type
);
85 hba
->mail_queue_access
= BNX2I_MQ_BIN_MODE
;
86 } else if (hba
->pci_did
== PCI_DEVICE_ID_NX2_57710
||
87 hba
->pci_did
== PCI_DEVICE_ID_NX2_57711
)
88 set_bit(BNX2I_NX2_DEV_57710
, &hba
->cnic_dev_type
);
93 * get_adapter_list_head - returns head of adapter list
95 struct bnx2i_hba
*get_adapter_list_head(void)
97 struct bnx2i_hba
*hba
= NULL
;
98 struct bnx2i_hba
*tmp_hba
;
103 read_lock(&bnx2i_dev_lock
);
104 list_for_each_entry(tmp_hba
, &adapter_list
, link
) {
105 if (tmp_hba
->cnic
&& tmp_hba
->cnic
->cm_select_dev
) {
110 read_unlock(&bnx2i_dev_lock
);
117 * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
118 * @cnic: pointer to cnic device instance
121 struct bnx2i_hba
*bnx2i_find_hba_for_cnic(struct cnic_dev
*cnic
)
123 struct bnx2i_hba
*hba
, *temp
;
125 read_lock(&bnx2i_dev_lock
);
126 list_for_each_entry_safe(hba
, temp
, &adapter_list
, link
) {
127 if (hba
->cnic
== cnic
) {
128 read_unlock(&bnx2i_dev_lock
);
132 read_unlock(&bnx2i_dev_lock
);
138 * bnx2i_start - cnic callback to initialize & start adapter instance
139 * @handle: transparent handle pointing to adapter structure
141 * This function maps adapter structure to pcidev structure and initiates
142 * firmware handshake to enable/initialize on chip iscsi components
143 * This bnx2i - cnic interface api callback is issued after following
144 * 2 conditions are met -
145 * a) underlying network interface is up (marked by event 'NETDEV_UP'
147 * b) bnx2i adapter instance is registered
149 void bnx2i_start(void *handle
)
151 #define BNX2I_INIT_POLL_TIME (1000 / HZ)
152 struct bnx2i_hba
*hba
= handle
;
155 bnx2i_send_fw_iscsi_init_msg(hba
);
156 while (!test_bit(ADAPTER_STATE_UP
, &hba
->adapter_state
) && i
--)
157 msleep(BNX2I_INIT_POLL_TIME
);
162 * bnx2i_stop - cnic callback to shutdown adapter instance
163 * @handle: transparent handle pointing to adapter structure
165 * driver checks if adapter is already in shutdown mode, if not start
166 * the shutdown process
168 void bnx2i_stop(void *handle
)
170 struct bnx2i_hba
*hba
= handle
;
172 /* check if cleanup happened in GOING_DOWN context */
173 clear_bit(ADAPTER_STATE_UP
, &hba
->adapter_state
);
174 if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN
,
175 &hba
->adapter_state
))
176 iscsi_host_for_each_session(hba
->shost
,
181 * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
182 * @hba: Adapter instance to register
184 * registers bnx2i adapter instance with the cnic driver while holding the
185 * adapter structure lock
187 void bnx2i_register_device(struct bnx2i_hba
*hba
)
189 if (test_bit(ADAPTER_STATE_GOING_DOWN
, &hba
->adapter_state
) ||
190 test_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
)) {
194 hba
->cnic
->register_device(hba
->cnic
, CNIC_ULP_ISCSI
, hba
);
196 spin_lock(&hba
->lock
);
198 spin_unlock(&hba
->lock
);
200 set_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
);
205 * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
207 * registers all bnx2i adapter instances with the cnic driver while holding
208 * the global resource lock
210 void bnx2i_reg_dev_all(void)
212 struct bnx2i_hba
*hba
, *temp
;
214 read_lock(&bnx2i_dev_lock
);
215 list_for_each_entry_safe(hba
, temp
, &adapter_list
, link
)
216 bnx2i_register_device(hba
);
217 read_unlock(&bnx2i_dev_lock
);
222 * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
223 * @hba: Adapter instance to unregister
225 * registers bnx2i adapter instance with the cnic driver while holding
226 * the adapter structure lock
228 static void bnx2i_unreg_one_device(struct bnx2i_hba
*hba
)
230 if (hba
->ofld_conns_active
||
231 !test_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
) ||
232 test_bit(ADAPTER_STATE_GOING_DOWN
, &hba
->adapter_state
))
235 hba
->cnic
->unregister_device(hba
->cnic
, CNIC_ULP_ISCSI
);
237 spin_lock(&hba
->lock
);
239 spin_unlock(&hba
->lock
);
241 /* ep_disconnect could come before NETDEV_DOWN, driver won't
242 * see NETDEV_DOWN as it already unregistered itself.
244 hba
->adapter_state
= 0;
245 clear_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
);
249 * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
251 * unregisters all bnx2i adapter instances with the cnic driver while holding
252 * the global resource lock
254 void bnx2i_unreg_dev_all(void)
256 struct bnx2i_hba
*hba
, *temp
;
258 read_lock(&bnx2i_dev_lock
);
259 list_for_each_entry_safe(hba
, temp
, &adapter_list
, link
)
260 bnx2i_unreg_one_device(hba
);
261 read_unlock(&bnx2i_dev_lock
);
266 * bnx2i_init_one - initialize an adapter instance and allocate memory resources
267 * @hba: bnx2i adapter instance
268 * @cnic: cnic device handle
270 * Global resource lock and host adapter lock is held during critical sections
271 * below. This routine is called from cnic_register_driver() context and
272 * work horse thread which does majority of device specific initialization
274 static int bnx2i_init_one(struct bnx2i_hba
*hba
, struct cnic_dev
*cnic
)
278 read_lock(&bnx2i_dev_lock
);
279 if (bnx2i_reg_device
&&
280 !test_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
)) {
281 rc
= cnic
->register_device(cnic
, CNIC_ULP_ISCSI
, hba
);
282 if (rc
) /* duplicate registration */
283 printk(KERN_ERR
"bnx2i- dev reg failed\n");
285 spin_lock(&hba
->lock
);
288 spin_unlock(&hba
->lock
);
290 set_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
);
292 read_unlock(&bnx2i_dev_lock
);
294 write_lock(&bnx2i_dev_lock
);
295 list_add_tail(&hba
->link
, &adapter_list
);
297 write_unlock(&bnx2i_dev_lock
);
303 * bnx2i_ulp_init - initialize an adapter instance
304 * @dev: cnic device handle
306 * Called from cnic_register_driver() context to initialize all enumerated
307 * cnic devices. This routine allocate adapter structure and other
308 * device specific resources.
310 void bnx2i_ulp_init(struct cnic_dev
*dev
)
312 struct bnx2i_hba
*hba
;
314 /* Allocate a HBA structure for this device */
315 hba
= bnx2i_alloc_hba(dev
);
317 printk(KERN_ERR
"bnx2i init: hba initialization failed\n");
321 /* Get PCI related information and update hba struct members */
322 clear_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
);
323 if (bnx2i_init_one(hba
, dev
)) {
324 printk(KERN_ERR
"bnx2i - hba %p init failed\n", hba
);
332 * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
333 * @dev: cnic device handle
336 void bnx2i_ulp_exit(struct cnic_dev
*dev
)
338 struct bnx2i_hba
*hba
;
340 hba
= bnx2i_find_hba_for_cnic(dev
);
342 printk(KERN_INFO
"bnx2i_ulp_exit: hba not "
343 "found, dev 0x%p\n", dev
);
346 write_lock(&bnx2i_dev_lock
);
347 list_del_init(&hba
->link
);
350 if (test_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
)) {
351 hba
->cnic
->unregister_device(hba
->cnic
, CNIC_ULP_ISCSI
);
352 clear_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
);
354 spin_lock(&hba
->lock
);
356 spin_unlock(&hba
->lock
);
358 write_unlock(&bnx2i_dev_lock
);
365 * bnx2i_mod_init - module init entry point
367 * initialize any driver wide global data structures such as endpoint pool,
368 * tcp port manager/queue, sysfs. finally driver will register itself
369 * with the cnic module
371 static int __init
bnx2i_mod_init(void)
375 printk(KERN_INFO
"%s", version
);
377 if (!is_power_of_2(sq_size
))
378 sq_size
= roundup_pow_of_two(sq_size
);
380 bnx2i_scsi_xport_template
=
381 iscsi_register_transport(&bnx2i_iscsi_transport
);
382 if (!bnx2i_scsi_xport_template
) {
383 printk(KERN_ERR
"Could not register bnx2i transport.\n");
388 err
= cnic_register_driver(CNIC_ULP_ISCSI
, &bnx2i_cnic_cb
);
390 printk(KERN_ERR
"Could not register bnx2i cnic driver.\n");
397 iscsi_unregister_transport(&bnx2i_iscsi_transport
);
404 * bnx2i_mod_exit - module cleanup/exit entry point
406 * Global resource lock and host adapter lock is held during critical sections
407 * in this function. Driver will browse through the adapter list, cleans-up
408 * each instance, unregisters iscsi transport name and finally driver will
409 * unregister itself with the cnic module
411 static void __exit
bnx2i_mod_exit(void)
413 struct bnx2i_hba
*hba
;
415 write_lock(&bnx2i_dev_lock
);
416 while (!list_empty(&adapter_list
)) {
417 hba
= list_entry(adapter_list
.next
, struct bnx2i_hba
, link
);
418 list_del(&hba
->link
);
421 if (test_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
)) {
422 hba
->cnic
->unregister_device(hba
->cnic
, CNIC_ULP_ISCSI
);
423 clear_bit(BNX2I_CNIC_REGISTERED
, &hba
->reg_with_cnic
);
427 write_unlock(&bnx2i_dev_lock
);
429 write_lock(&bnx2i_dev_lock
);
431 write_unlock(&bnx2i_dev_lock
);
433 iscsi_unregister_transport(&bnx2i_iscsi_transport
);
434 cnic_unregister_driver(CNIC_ULP_ISCSI
);
437 module_init(bnx2i_mod_init
);
438 module_exit(bnx2i_mod_exit
);