2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/delay.h>
13 * qla2x00_mailbox_command
14 * Issue mailbox command and waits for completion.
17 * ha = adapter block pointer.
18 * mcp = driver internal mbx struct pointer.
21 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
24 * 0 : QLA_SUCCESS = cmd performed success
25 * 1 : QLA_FUNCTION_FAILED (error encountered)
26 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
32 qla2x00_mailbox_command(scsi_qla_host_t
*vha
, mbx_cmd_t
*mcp
)
35 unsigned long flags
= 0;
36 device_reg_t __iomem
*reg
;
41 uint16_t __iomem
*optr
;
44 unsigned long wait_time
;
45 struct qla_hw_data
*ha
= vha
->hw
;
46 scsi_qla_host_t
*base_vha
= pci_get_drvdata(ha
->pdev
);
49 io_lock_on
= base_vha
->flags
.init_done
;
52 abort_active
= test_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
54 DEBUG11(printk("%s(%ld): entered.\n", __func__
, base_vha
->host_no
));
57 * Wait for active mailbox commands to finish by waiting at most tov
58 * seconds. This is to serialize actual issuing of mailbox cmds during
62 if (!wait_for_completion_timeout(&ha
->mbx_cmd_comp
,
64 /* Timeout occurred. Return error. */
65 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
66 "Exiting.\n", __func__
, base_vha
->host_no
));
67 return QLA_FUNCTION_TIMEOUT
;
71 ha
->flags
.mbox_busy
= 1;
72 /* Save mailbox command for debug */
75 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
76 base_vha
->host_no
, mcp
->mb
[0]));
78 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
80 /* Load mailbox registers. */
81 if (IS_FWI2_CAPABLE(ha
))
82 optr
= (uint16_t __iomem
*)®
->isp24
.mailbox0
;
84 optr
= (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 0);
90 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
91 if (IS_QLA2200(ha
) && cnt
== 8)
93 (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 8);
95 WRT_REG_WORD(optr
, *iptr
);
102 #if defined(QL_DEBUG_LEVEL_1)
103 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
104 __func__
, base_vha
->host_no
);
105 qla2x00_dump_buffer((uint8_t *)mcp
->mb
, 16);
107 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x10), 16);
109 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x20), 8);
111 printk("%s(%ld): I/O address = %p.\n", __func__
, base_vha
->host_no
,
113 qla2x00_dump_regs(base_vha
);
116 /* Issue set host interrupt command to send cmd out. */
117 ha
->flags
.mbox_int
= 0;
118 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
120 /* Unlock mbx registers and wait for interrupt */
121 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
122 "jiffies=%lx.\n", __func__
, base_vha
->host_no
, jiffies
));
124 /* Wait for mbx cmd completion until timeout */
126 if (!abort_active
&& io_lock_on
) {
128 set_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
130 if (IS_FWI2_CAPABLE(ha
))
131 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
133 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
134 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
136 wait_for_completion_timeout(&ha
->mbx_intr_comp
, mcp
->tov
* HZ
);
138 clear_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
141 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__
,
142 base_vha
->host_no
, command
));
144 if (IS_FWI2_CAPABLE(ha
))
145 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
147 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
148 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
150 wait_time
= jiffies
+ mcp
->tov
* HZ
; /* wait at most tov secs */
151 while (!ha
->flags
.mbox_int
) {
152 if (time_after(jiffies
, wait_time
))
155 /* Check for pending interrupts. */
156 qla2x00_poll(ha
->rsp_q_map
[0]);
158 if (command
!= MBC_LOAD_RISC_RAM_EXTENDED
&&
164 /* Check whether we timed out */
165 if (ha
->flags
.mbox_int
) {
168 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__
,
169 base_vha
->host_no
, command
));
171 /* Got interrupt. Clear the flag. */
172 ha
->flags
.mbox_int
= 0;
173 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
175 if (ha
->mailbox_out
[0] != MBS_COMMAND_COMPLETE
)
176 rval
= QLA_FUNCTION_FAILED
;
178 /* Load return mailbox registers. */
180 iptr
= (uint16_t *)&ha
->mailbox_out
[0];
182 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
192 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
193 defined(QL_DEBUG_LEVEL_11)
197 if (IS_FWI2_CAPABLE(ha
)) {
198 mb0
= RD_REG_WORD(®
->isp24
.mailbox0
);
199 ictrl
= RD_REG_DWORD(®
->isp24
.ictrl
);
201 mb0
= RD_MAILBOX_REG(ha
, ®
->isp
, 0);
202 ictrl
= RD_REG_WORD(®
->isp
.ictrl
);
204 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
205 __func__
, base_vha
->host_no
, command
);
206 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__
,
207 base_vha
->host_no
, ictrl
, jiffies
);
208 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__
,
209 base_vha
->host_no
, mb0
);
210 qla2x00_dump_regs(base_vha
);
213 rval
= QLA_FUNCTION_TIMEOUT
;
216 ha
->flags
.mbox_busy
= 0;
221 if (abort_active
|| !io_lock_on
) {
222 DEBUG11(printk("%s(%ld): checking for additional resp "
223 "interrupt.\n", __func__
, base_vha
->host_no
));
225 /* polling mode for non isp_abort commands. */
226 qla2x00_poll(ha
->rsp_q_map
[0]);
229 if (rval
== QLA_FUNCTION_TIMEOUT
&&
230 mcp
->mb
[0] != MBC_GEN_SYSTEM_ERROR
) {
231 if (!io_lock_on
|| (mcp
->flags
& IOCTL_CMD
)) {
232 /* not in dpc. schedule it for dpc to take over. */
233 DEBUG(printk("%s(%ld): timeout schedule "
234 "isp_abort_needed.\n", __func__
,
236 DEBUG2_3_11(printk("%s(%ld): timeout schedule "
237 "isp_abort_needed.\n", __func__
,
239 qla_printk(KERN_WARNING
, ha
,
240 "Mailbox command timeout occurred. Scheduling ISP "
242 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
243 qla2xxx_wake_dpc(vha
);
244 } else if (!abort_active
) {
245 /* call abort directly since we are in the DPC thread */
246 DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
247 __func__
, base_vha
->host_no
));
248 DEBUG2_3_11(printk("%s(%ld): timeout calling "
249 "abort_isp\n", __func__
, base_vha
->host_no
));
250 qla_printk(KERN_WARNING
, ha
,
251 "Mailbox command timeout occurred. Issuing ISP "
254 set_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
255 clear_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
256 if (qla2x00_abort_isp(base_vha
)) {
257 /* Failed. retry later. */
258 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
260 clear_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
261 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__
,
263 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
264 __func__
, base_vha
->host_no
));
268 /* Allow next mbx cmd to come in. */
270 complete(&ha
->mbx_cmd_comp
);
273 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
274 "mbx2=%x, cmd=%x ****\n", __func__
, base_vha
->host_no
,
275 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], command
));
277 DEBUG11(printk("%s(%ld): done.\n", __func__
,
285 qla2x00_load_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t risc_addr
,
286 uint32_t risc_code_size
)
289 struct qla_hw_data
*ha
= vha
->hw
;
291 mbx_cmd_t
*mcp
= &mc
;
293 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
295 if (MSW(risc_addr
) || IS_FWI2_CAPABLE(ha
)) {
296 mcp
->mb
[0] = MBC_LOAD_RISC_RAM_EXTENDED
;
297 mcp
->mb
[8] = MSW(risc_addr
);
298 mcp
->out_mb
= MBX_8
|MBX_0
;
300 mcp
->mb
[0] = MBC_LOAD_RISC_RAM
;
303 mcp
->mb
[1] = LSW(risc_addr
);
304 mcp
->mb
[2] = MSW(req_dma
);
305 mcp
->mb
[3] = LSW(req_dma
);
306 mcp
->mb
[6] = MSW(MSD(req_dma
));
307 mcp
->mb
[7] = LSW(MSD(req_dma
));
308 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
309 if (IS_FWI2_CAPABLE(ha
)) {
310 mcp
->mb
[4] = MSW(risc_code_size
);
311 mcp
->mb
[5] = LSW(risc_code_size
);
312 mcp
->out_mb
|= MBX_5
|MBX_4
;
314 mcp
->mb
[4] = LSW(risc_code_size
);
315 mcp
->out_mb
|= MBX_4
;
319 mcp
->tov
= MBX_TOV_SECONDS
;
321 rval
= qla2x00_mailbox_command(vha
, mcp
);
323 if (rval
!= QLA_SUCCESS
) {
324 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
325 vha
->host_no
, rval
, mcp
->mb
[0]));
327 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
335 * Start adapter firmware.
338 * ha = adapter block pointer.
339 * TARGET_QUEUE_LOCK must be released.
340 * ADAPTER_STATE_LOCK must be released.
343 * qla2x00 local function return status code.
349 qla2x00_execute_fw(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
352 struct qla_hw_data
*ha
= vha
->hw
;
354 mbx_cmd_t
*mcp
= &mc
;
356 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
358 mcp
->mb
[0] = MBC_EXECUTE_FIRMWARE
;
361 if (IS_FWI2_CAPABLE(ha
)) {
362 mcp
->mb
[1] = MSW(risc_addr
);
363 mcp
->mb
[2] = LSW(risc_addr
);
366 mcp
->out_mb
|= MBX_4
|MBX_3
|MBX_2
|MBX_1
;
369 mcp
->mb
[1] = LSW(risc_addr
);
370 mcp
->out_mb
|= MBX_1
;
371 if (IS_QLA2322(ha
) || IS_QLA6322(ha
)) {
373 mcp
->out_mb
|= MBX_2
;
377 mcp
->tov
= MBX_TOV_SECONDS
;
379 rval
= qla2x00_mailbox_command(vha
, mcp
);
381 if (rval
!= QLA_SUCCESS
) {
382 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
383 vha
->host_no
, rval
, mcp
->mb
[0]));
385 if (IS_FWI2_CAPABLE(ha
)) {
386 DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
387 __func__
, vha
->host_no
, mcp
->mb
[1]));
389 DEBUG11(printk("%s(%ld): done.\n", __func__
,
398 * qla2x00_get_fw_version
399 * Get firmware version.
402 * ha: adapter state pointer.
403 * major: pointer for major number.
404 * minor: pointer for minor number.
405 * subminor: pointer for subminor number.
408 * qla2x00 local function return status code.
414 qla2x00_get_fw_version(scsi_qla_host_t
*vha
, uint16_t *major
, uint16_t *minor
,
415 uint16_t *subminor
, uint16_t *attributes
, uint32_t *memory
)
419 mbx_cmd_t
*mcp
= &mc
;
421 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
423 mcp
->mb
[0] = MBC_GET_FIRMWARE_VERSION
;
425 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
427 mcp
->tov
= MBX_TOV_SECONDS
;
428 rval
= qla2x00_mailbox_command(vha
, mcp
);
430 /* Return mailbox data. */
433 *subminor
= mcp
->mb
[3];
434 *attributes
= mcp
->mb
[6];
435 if (IS_QLA2100(vha
->hw
) || IS_QLA2200(vha
->hw
))
436 *memory
= 0x1FFFF; /* Defaults to 128KB. */
438 *memory
= (mcp
->mb
[5] << 16) | mcp
->mb
[4];
440 if (rval
!= QLA_SUCCESS
) {
442 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
443 vha
->host_no
, rval
));
446 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
451 * qla2x00_get_fw_options
452 * Set firmware options.
455 * ha = adapter block pointer.
456 * fwopt = pointer for firmware options.
459 * qla2x00 local function return status code.
465 qla2x00_get_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
469 mbx_cmd_t
*mcp
= &mc
;
471 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
473 mcp
->mb
[0] = MBC_GET_FIRMWARE_OPTION
;
475 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
476 mcp
->tov
= MBX_TOV_SECONDS
;
478 rval
= qla2x00_mailbox_command(vha
, mcp
);
480 if (rval
!= QLA_SUCCESS
) {
482 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
483 vha
->host_no
, rval
));
485 fwopts
[0] = mcp
->mb
[0];
486 fwopts
[1] = mcp
->mb
[1];
487 fwopts
[2] = mcp
->mb
[2];
488 fwopts
[3] = mcp
->mb
[3];
490 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
498 * qla2x00_set_fw_options
499 * Set firmware options.
502 * ha = adapter block pointer.
503 * fwopt = pointer for firmware options.
506 * qla2x00 local function return status code.
512 qla2x00_set_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
516 mbx_cmd_t
*mcp
= &mc
;
518 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
520 mcp
->mb
[0] = MBC_SET_FIRMWARE_OPTION
;
521 mcp
->mb
[1] = fwopts
[1];
522 mcp
->mb
[2] = fwopts
[2];
523 mcp
->mb
[3] = fwopts
[3];
524 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
526 if (IS_FWI2_CAPABLE(vha
->hw
)) {
529 mcp
->mb
[10] = fwopts
[10];
530 mcp
->mb
[11] = fwopts
[11];
531 mcp
->mb
[12] = 0; /* Undocumented, but used */
532 mcp
->out_mb
|= MBX_12
|MBX_11
|MBX_10
;
534 mcp
->tov
= MBX_TOV_SECONDS
;
536 rval
= qla2x00_mailbox_command(vha
, mcp
);
538 fwopts
[0] = mcp
->mb
[0];
540 if (rval
!= QLA_SUCCESS
) {
542 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__
,
543 vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
546 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
553 * qla2x00_mbx_reg_test
554 * Mailbox register wrap test.
557 * ha = adapter block pointer.
558 * TARGET_QUEUE_LOCK must be released.
559 * ADAPTER_STATE_LOCK must be released.
562 * qla2x00 local function return status code.
568 qla2x00_mbx_reg_test(scsi_qla_host_t
*vha
)
571 struct qla_hw_data
*ha
= vha
->hw
;
573 mbx_cmd_t
*mcp
= &mc
;
575 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", vha
->host_no
));
577 mcp
->mb
[0] = MBC_MAILBOX_REGISTER_TEST
;
585 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
586 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
587 mcp
->tov
= MBX_TOV_SECONDS
;
589 rval
= qla2x00_mailbox_command(vha
, mcp
);
591 if (rval
== QLA_SUCCESS
) {
592 if (mcp
->mb
[1] != 0xAAAA || mcp
->mb
[2] != 0x5555 ||
593 mcp
->mb
[3] != 0xAA55 || mcp
->mb
[4] != 0x55AA)
594 rval
= QLA_FUNCTION_FAILED
;
595 if (mcp
->mb
[5] != 0xA5A5 || mcp
->mb
[6] != 0x5A5A ||
596 mcp
->mb
[7] != 0x2525)
597 rval
= QLA_FUNCTION_FAILED
;
598 if (rval
== QLA_FUNCTION_FAILED
) {
599 struct device_reg_24xx __iomem
*reg
=
602 qla2xxx_hw_event_log(vha
, HW_EVENT_ISP_ERR
, 0,
603 LSW(RD_REG_DWORD(®
->hccr
)),
604 LSW(RD_REG_DWORD(®
->istatus
)));
608 if (rval
!= QLA_SUCCESS
) {
610 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
611 vha
->host_no
, rval
));
614 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
622 * qla2x00_verify_checksum
623 * Verify firmware checksum.
626 * ha = adapter block pointer.
627 * TARGET_QUEUE_LOCK must be released.
628 * ADAPTER_STATE_LOCK must be released.
631 * qla2x00 local function return status code.
637 qla2x00_verify_checksum(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
641 mbx_cmd_t
*mcp
= &mc
;
643 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
645 mcp
->mb
[0] = MBC_VERIFY_CHECKSUM
;
648 if (IS_FWI2_CAPABLE(vha
->hw
)) {
649 mcp
->mb
[1] = MSW(risc_addr
);
650 mcp
->mb
[2] = LSW(risc_addr
);
651 mcp
->out_mb
|= MBX_2
|MBX_1
;
652 mcp
->in_mb
|= MBX_2
|MBX_1
;
654 mcp
->mb
[1] = LSW(risc_addr
);
655 mcp
->out_mb
|= MBX_1
;
659 mcp
->tov
= MBX_TOV_SECONDS
;
661 rval
= qla2x00_mailbox_command(vha
, mcp
);
663 if (rval
!= QLA_SUCCESS
) {
664 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__
,
665 vha
->host_no
, rval
, IS_FWI2_CAPABLE(vha
->hw
) ?
666 (mcp
->mb
[2] << 16) | mcp
->mb
[1]: mcp
->mb
[1]));
668 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
676 * Issue IOCB using mailbox command
679 * ha = adapter state pointer.
680 * buffer = buffer pointer.
681 * phys_addr = physical address of buffer.
682 * size = size of buffer.
683 * TARGET_QUEUE_LOCK must be released.
684 * ADAPTER_STATE_LOCK must be released.
687 * qla2x00 local function return status code.
693 qla2x00_issue_iocb_timeout(scsi_qla_host_t
*vha
, void *buffer
,
694 dma_addr_t phys_addr
, size_t size
, uint32_t tov
)
698 mbx_cmd_t
*mcp
= &mc
;
700 mcp
->mb
[0] = MBC_IOCB_COMMAND_A64
;
702 mcp
->mb
[2] = MSW(phys_addr
);
703 mcp
->mb
[3] = LSW(phys_addr
);
704 mcp
->mb
[6] = MSW(MSD(phys_addr
));
705 mcp
->mb
[7] = LSW(MSD(phys_addr
));
706 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
707 mcp
->in_mb
= MBX_2
|MBX_0
;
710 rval
= qla2x00_mailbox_command(vha
, mcp
);
712 if (rval
!= QLA_SUCCESS
) {
714 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
715 vha
->host_no
, rval
));
717 sts_entry_t
*sts_entry
= (sts_entry_t
*) buffer
;
719 /* Mask reserved bits. */
720 sts_entry
->entry_status
&=
721 IS_FWI2_CAPABLE(vha
->hw
) ? RF_MASK_24XX
: RF_MASK
;
728 qla2x00_issue_iocb(scsi_qla_host_t
*vha
, void *buffer
, dma_addr_t phys_addr
,
731 return qla2x00_issue_iocb_timeout(vha
, buffer
, phys_addr
, size
,
736 * qla2x00_abort_command
737 * Abort command aborts a specified IOCB.
740 * ha = adapter block pointer.
741 * sp = SB structure pointer.
744 * qla2x00 local function return status code.
750 qla2x00_abort_command(scsi_qla_host_t
*vha
, srb_t
*sp
, struct req_que
*req
)
752 unsigned long flags
= 0;
757 mbx_cmd_t
*mcp
= &mc
;
758 struct qla_hw_data
*ha
= vha
->hw
;
760 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha
->host_no
));
764 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
765 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
766 if (req
->outstanding_cmds
[handle
] == sp
)
769 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
771 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
772 /* command not found */
773 return QLA_FUNCTION_FAILED
;
776 mcp
->mb
[0] = MBC_ABORT_COMMAND
;
777 if (HAS_EXTENDED_IDS(ha
))
778 mcp
->mb
[1] = fcport
->loop_id
;
780 mcp
->mb
[1] = fcport
->loop_id
<< 8;
781 mcp
->mb
[2] = (uint16_t)handle
;
782 mcp
->mb
[3] = (uint16_t)(handle
>> 16);
783 mcp
->mb
[6] = (uint16_t)sp
->cmd
->device
->lun
;
784 mcp
->out_mb
= MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
786 mcp
->tov
= MBX_TOV_SECONDS
;
788 rval
= qla2x00_mailbox_command(vha
, mcp
);
790 if (rval
!= QLA_SUCCESS
) {
791 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
792 vha
->host_no
, rval
));
794 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
802 qla2x00_abort_target(struct fc_port
*fcport
, unsigned int l
)
806 mbx_cmd_t
*mcp
= &mc
;
807 scsi_qla_host_t
*vha
;
811 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
815 req
= vha
->hw
->req_q_map
[0];
816 rsp
= vha
->hw
->rsp_q_map
[0];
817 mcp
->mb
[0] = MBC_ABORT_TARGET
;
818 mcp
->out_mb
= MBX_9
|MBX_2
|MBX_1
|MBX_0
;
819 if (HAS_EXTENDED_IDS(vha
->hw
)) {
820 mcp
->mb
[1] = fcport
->loop_id
;
822 mcp
->out_mb
|= MBX_10
;
824 mcp
->mb
[1] = fcport
->loop_id
<< 8;
826 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
827 mcp
->mb
[9] = vha
->vp_idx
;
830 mcp
->tov
= MBX_TOV_SECONDS
;
832 rval
= qla2x00_mailbox_command(vha
, mcp
);
833 if (rval
!= QLA_SUCCESS
) {
834 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
835 vha
->host_no
, rval
));
838 /* Issue marker IOCB. */
839 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, 0,
841 if (rval2
!= QLA_SUCCESS
) {
842 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
843 "(%x).\n", __func__
, vha
->host_no
, rval2
));
845 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
852 qla2x00_lun_reset(struct fc_port
*fcport
, unsigned int l
)
856 mbx_cmd_t
*mcp
= &mc
;
857 scsi_qla_host_t
*vha
;
861 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
864 req
= vha
->hw
->req_q_map
[0];
865 rsp
= vha
->hw
->rsp_q_map
[0];
866 mcp
->mb
[0] = MBC_LUN_RESET
;
867 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
868 if (HAS_EXTENDED_IDS(vha
->hw
))
869 mcp
->mb
[1] = fcport
->loop_id
;
871 mcp
->mb
[1] = fcport
->loop_id
<< 8;
874 mcp
->mb
[9] = vha
->vp_idx
;
877 mcp
->tov
= MBX_TOV_SECONDS
;
879 rval
= qla2x00_mailbox_command(vha
, mcp
);
880 if (rval
!= QLA_SUCCESS
) {
881 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
882 vha
->host_no
, rval
));
885 /* Issue marker IOCB. */
886 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
888 if (rval2
!= QLA_SUCCESS
) {
889 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
890 "(%x).\n", __func__
, vha
->host_no
, rval2
));
892 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
899 * qla2x00_get_adapter_id
900 * Get adapter ID and topology.
903 * ha = adapter block pointer.
904 * id = pointer for loop ID.
905 * al_pa = pointer for AL_PA.
906 * area = pointer for area.
907 * domain = pointer for domain.
908 * top = pointer for topology.
909 * TARGET_QUEUE_LOCK must be released.
910 * ADAPTER_STATE_LOCK must be released.
913 * qla2x00 local function return status code.
919 qla2x00_get_adapter_id(scsi_qla_host_t
*vha
, uint16_t *id
, uint8_t *al_pa
,
920 uint8_t *area
, uint8_t *domain
, uint16_t *top
, uint16_t *sw_cap
)
924 mbx_cmd_t
*mcp
= &mc
;
926 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
929 mcp
->mb
[0] = MBC_GET_ADAPTER_LOOP_ID
;
930 mcp
->mb
[9] = vha
->vp_idx
;
931 mcp
->out_mb
= MBX_9
|MBX_0
;
932 mcp
->in_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
933 mcp
->tov
= MBX_TOV_SECONDS
;
935 rval
= qla2x00_mailbox_command(vha
, mcp
);
936 if (mcp
->mb
[0] == MBS_COMMAND_ERROR
)
937 rval
= QLA_COMMAND_ERROR
;
938 else if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
939 rval
= QLA_INVALID_COMMAND
;
943 *al_pa
= LSB(mcp
->mb
[2]);
944 *area
= MSB(mcp
->mb
[2]);
945 *domain
= LSB(mcp
->mb
[3]);
947 *sw_cap
= mcp
->mb
[7];
949 if (rval
!= QLA_SUCCESS
) {
951 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
952 vha
->host_no
, rval
));
955 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
963 * qla2x00_get_retry_cnt
964 * Get current firmware login retry count and delay.
967 * ha = adapter block pointer.
968 * retry_cnt = pointer to login retry count.
969 * tov = pointer to login timeout value.
972 * qla2x00 local function return status code.
978 qla2x00_get_retry_cnt(scsi_qla_host_t
*vha
, uint8_t *retry_cnt
, uint8_t *tov
,
984 mbx_cmd_t
*mcp
= &mc
;
986 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
989 mcp
->mb
[0] = MBC_GET_RETRY_COUNT
;
991 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
992 mcp
->tov
= MBX_TOV_SECONDS
;
994 rval
= qla2x00_mailbox_command(vha
, mcp
);
996 if (rval
!= QLA_SUCCESS
) {
998 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
999 vha
->host_no
, mcp
->mb
[0]));
1001 /* Convert returned data and check our values. */
1002 *r_a_tov
= mcp
->mb
[3] / 2;
1003 ratov
= (mcp
->mb
[3]/2) / 10; /* mb[3] value is in 100ms */
1004 if (mcp
->mb
[1] * ratov
> (*retry_cnt
) * (*tov
)) {
1005 /* Update to the larger values */
1006 *retry_cnt
= (uint8_t)mcp
->mb
[1];
1010 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
1011 "ratov=%d.\n", vha
->host_no
, mcp
->mb
[3], ratov
));
1018 * qla2x00_init_firmware
1019 * Initialize adapter firmware.
1022 * ha = adapter block pointer.
1023 * dptr = Initialization control block pointer.
1024 * size = size of initialization control block.
1025 * TARGET_QUEUE_LOCK must be released.
1026 * ADAPTER_STATE_LOCK must be released.
1029 * qla2x00 local function return status code.
1035 qla2x00_init_firmware(scsi_qla_host_t
*vha
, uint16_t size
)
1039 mbx_cmd_t
*mcp
= &mc
;
1040 struct qla_hw_data
*ha
= vha
->hw
;
1042 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
1045 if (ha
->flags
.npiv_supported
)
1046 mcp
->mb
[0] = MBC_MID_INITIALIZE_FIRMWARE
;
1048 mcp
->mb
[0] = MBC_INITIALIZE_FIRMWARE
;
1050 mcp
->mb
[2] = MSW(ha
->init_cb_dma
);
1051 mcp
->mb
[3] = LSW(ha
->init_cb_dma
);
1054 mcp
->mb
[6] = MSW(MSD(ha
->init_cb_dma
));
1055 mcp
->mb
[7] = LSW(MSD(ha
->init_cb_dma
));
1056 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1057 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_0
;
1058 mcp
->buf_size
= size
;
1059 mcp
->flags
= MBX_DMA_OUT
;
1060 mcp
->tov
= MBX_TOV_SECONDS
;
1061 rval
= qla2x00_mailbox_command(vha
, mcp
);
1063 if (rval
!= QLA_SUCCESS
) {
1065 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
1067 vha
->host_no
, rval
, mcp
->mb
[0]));
1070 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
1078 * qla2x00_get_port_database
1079 * Issue normal/enhanced get port database mailbox command
1080 * and copy device name as necessary.
1083 * ha = adapter state pointer.
1084 * dev = structure pointer.
1085 * opt = enhanced cmd option byte.
1088 * qla2x00 local function return status code.
1094 qla2x00_get_port_database(scsi_qla_host_t
*vha
, fc_port_t
*fcport
, uint8_t opt
)
1098 mbx_cmd_t
*mcp
= &mc
;
1099 port_database_t
*pd
;
1100 struct port_database_24xx
*pd24
;
1102 struct qla_hw_data
*ha
= vha
->hw
;
1104 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1107 pd
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pd_dma
);
1109 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
1110 "structure.\n", __func__
, vha
->host_no
));
1111 return QLA_MEMORY_ALLOC_FAILED
;
1113 memset(pd
, 0, max(PORT_DATABASE_SIZE
, PORT_DATABASE_24XX_SIZE
));
1115 mcp
->mb
[0] = MBC_GET_PORT_DATABASE
;
1116 if (opt
!= 0 && !IS_FWI2_CAPABLE(ha
))
1117 mcp
->mb
[0] = MBC_ENHANCED_GET_PORT_DATABASE
;
1118 mcp
->mb
[2] = MSW(pd_dma
);
1119 mcp
->mb
[3] = LSW(pd_dma
);
1120 mcp
->mb
[6] = MSW(MSD(pd_dma
));
1121 mcp
->mb
[7] = LSW(MSD(pd_dma
));
1122 mcp
->mb
[9] = vha
->vp_idx
;
1123 mcp
->out_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1125 if (IS_FWI2_CAPABLE(ha
)) {
1126 mcp
->mb
[1] = fcport
->loop_id
;
1128 mcp
->out_mb
|= MBX_10
|MBX_1
;
1129 mcp
->in_mb
|= MBX_1
;
1130 } else if (HAS_EXTENDED_IDS(ha
)) {
1131 mcp
->mb
[1] = fcport
->loop_id
;
1133 mcp
->out_mb
|= MBX_10
|MBX_1
;
1135 mcp
->mb
[1] = fcport
->loop_id
<< 8 | opt
;
1136 mcp
->out_mb
|= MBX_1
;
1138 mcp
->buf_size
= IS_FWI2_CAPABLE(ha
) ?
1139 PORT_DATABASE_24XX_SIZE
: PORT_DATABASE_SIZE
;
1140 mcp
->flags
= MBX_DMA_IN
;
1141 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1142 rval
= qla2x00_mailbox_command(vha
, mcp
);
1143 if (rval
!= QLA_SUCCESS
)
1146 if (IS_FWI2_CAPABLE(ha
)) {
1147 pd24
= (struct port_database_24xx
*) pd
;
1149 /* Check for logged in state. */
1150 if (pd24
->current_login_state
!= PDS_PRLI_COMPLETE
&&
1151 pd24
->last_login_state
!= PDS_PRLI_COMPLETE
) {
1152 DEBUG2(printk("%s(%ld): Unable to verify "
1153 "login-state (%x/%x) for loop_id %x\n",
1154 __func__
, vha
->host_no
,
1155 pd24
->current_login_state
,
1156 pd24
->last_login_state
, fcport
->loop_id
));
1157 rval
= QLA_FUNCTION_FAILED
;
1161 /* Names are little-endian. */
1162 memcpy(fcport
->node_name
, pd24
->node_name
, WWN_SIZE
);
1163 memcpy(fcport
->port_name
, pd24
->port_name
, WWN_SIZE
);
1165 /* Get port_id of device. */
1166 fcport
->d_id
.b
.domain
= pd24
->port_id
[0];
1167 fcport
->d_id
.b
.area
= pd24
->port_id
[1];
1168 fcport
->d_id
.b
.al_pa
= pd24
->port_id
[2];
1169 fcport
->d_id
.b
.rsvd_1
= 0;
1171 /* If not target must be initiator or unknown type. */
1172 if ((pd24
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1173 fcport
->port_type
= FCT_INITIATOR
;
1175 fcport
->port_type
= FCT_TARGET
;
1177 /* Check for logged in state. */
1178 if (pd
->master_state
!= PD_STATE_PORT_LOGGED_IN
&&
1179 pd
->slave_state
!= PD_STATE_PORT_LOGGED_IN
) {
1180 rval
= QLA_FUNCTION_FAILED
;
1184 /* Names are little-endian. */
1185 memcpy(fcport
->node_name
, pd
->node_name
, WWN_SIZE
);
1186 memcpy(fcport
->port_name
, pd
->port_name
, WWN_SIZE
);
1188 /* Get port_id of device. */
1189 fcport
->d_id
.b
.domain
= pd
->port_id
[0];
1190 fcport
->d_id
.b
.area
= pd
->port_id
[3];
1191 fcport
->d_id
.b
.al_pa
= pd
->port_id
[2];
1192 fcport
->d_id
.b
.rsvd_1
= 0;
1194 /* Check for device require authentication. */
1195 pd
->common_features
& BIT_5
? (fcport
->flags
|= FCF_AUTH_REQ
) :
1196 (fcport
->flags
&= ~FCF_AUTH_REQ
);
1198 /* If not target must be initiator or unknown type. */
1199 if ((pd
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1200 fcport
->port_type
= FCT_INITIATOR
;
1202 fcport
->port_type
= FCT_TARGET
;
1204 /* Passback COS information. */
1205 fcport
->supported_classes
= (pd
->options
& BIT_4
) ?
1206 FC_COS_CLASS2
: FC_COS_CLASS3
;
1210 dma_pool_free(ha
->s_dma_pool
, pd
, pd_dma
);
1212 if (rval
!= QLA_SUCCESS
) {
1213 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
1214 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1216 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1223 * qla2x00_get_firmware_state
1224 * Get adapter firmware state.
1227 * ha = adapter block pointer.
1228 * dptr = pointer for firmware state.
1229 * TARGET_QUEUE_LOCK must be released.
1230 * ADAPTER_STATE_LOCK must be released.
1233 * qla2x00 local function return status code.
1239 qla2x00_get_firmware_state(scsi_qla_host_t
*vha
, uint16_t *states
)
1243 mbx_cmd_t
*mcp
= &mc
;
1245 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
1248 mcp
->mb
[0] = MBC_GET_FIRMWARE_STATE
;
1249 mcp
->out_mb
= MBX_0
;
1250 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1251 mcp
->tov
= MBX_TOV_SECONDS
;
1253 rval
= qla2x00_mailbox_command(vha
, mcp
);
1255 /* Return firmware states. */
1256 states
[0] = mcp
->mb
[1];
1257 states
[1] = mcp
->mb
[2];
1258 states
[2] = mcp
->mb
[3];
1260 if (rval
!= QLA_SUCCESS
) {
1262 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
1263 "failed=%x.\n", vha
->host_no
, rval
));
1266 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
1274 * qla2x00_get_port_name
1275 * Issue get port name mailbox command.
1276 * Returned name is in big endian format.
1279 * ha = adapter block pointer.
1280 * loop_id = loop ID of device.
1281 * name = pointer for name.
1282 * TARGET_QUEUE_LOCK must be released.
1283 * ADAPTER_STATE_LOCK must be released.
1286 * qla2x00 local function return status code.
1292 qla2x00_get_port_name(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t *name
,
1297 mbx_cmd_t
*mcp
= &mc
;
1299 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
1302 mcp
->mb
[0] = MBC_GET_PORT_NAME
;
1303 mcp
->mb
[9] = vha
->vp_idx
;
1304 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
1305 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1306 mcp
->mb
[1] = loop_id
;
1308 mcp
->out_mb
|= MBX_10
;
1310 mcp
->mb
[1] = loop_id
<< 8 | opt
;
1313 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1314 mcp
->tov
= MBX_TOV_SECONDS
;
1316 rval
= qla2x00_mailbox_command(vha
, mcp
);
1318 if (rval
!= QLA_SUCCESS
) {
1320 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
1321 vha
->host_no
, rval
));
1324 /* This function returns name in big endian. */
1325 name
[0] = MSB(mcp
->mb
[2]);
1326 name
[1] = LSB(mcp
->mb
[2]);
1327 name
[2] = MSB(mcp
->mb
[3]);
1328 name
[3] = LSB(mcp
->mb
[3]);
1329 name
[4] = MSB(mcp
->mb
[6]);
1330 name
[5] = LSB(mcp
->mb
[6]);
1331 name
[6] = MSB(mcp
->mb
[7]);
1332 name
[7] = LSB(mcp
->mb
[7]);
1335 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
1344 * Issue LIP reset mailbox command.
1347 * ha = adapter block pointer.
1348 * TARGET_QUEUE_LOCK must be released.
1349 * ADAPTER_STATE_LOCK must be released.
1352 * qla2x00 local function return status code.
1358 qla2x00_lip_reset(scsi_qla_host_t
*vha
)
1362 mbx_cmd_t
*mcp
= &mc
;
1364 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1366 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1367 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1370 mcp
->mb
[3] = vha
->hw
->loop_reset_delay
;
1371 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1373 mcp
->mb
[0] = MBC_LIP_RESET
;
1374 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1375 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1376 mcp
->mb
[1] = 0x00ff;
1378 mcp
->out_mb
|= MBX_10
;
1380 mcp
->mb
[1] = 0xff00;
1382 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
1386 mcp
->tov
= MBX_TOV_SECONDS
;
1388 rval
= qla2x00_mailbox_command(vha
, mcp
);
1390 if (rval
!= QLA_SUCCESS
) {
1392 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
1393 __func__
, vha
->host_no
, rval
));
1396 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1407 * ha = adapter block pointer.
1408 * sns = pointer for command.
1409 * cmd_size = command size.
1410 * buf_size = response/command size.
1411 * TARGET_QUEUE_LOCK must be released.
1412 * ADAPTER_STATE_LOCK must be released.
1415 * qla2x00 local function return status code.
1421 qla2x00_send_sns(scsi_qla_host_t
*vha
, dma_addr_t sns_phys_address
,
1422 uint16_t cmd_size
, size_t buf_size
)
1426 mbx_cmd_t
*mcp
= &mc
;
1428 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
1431 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
1432 "tov=%d.\n", vha
->hw
->retry_count
, vha
->hw
->login_timeout
,
1435 mcp
->mb
[0] = MBC_SEND_SNS_COMMAND
;
1436 mcp
->mb
[1] = cmd_size
;
1437 mcp
->mb
[2] = MSW(sns_phys_address
);
1438 mcp
->mb
[3] = LSW(sns_phys_address
);
1439 mcp
->mb
[6] = MSW(MSD(sns_phys_address
));
1440 mcp
->mb
[7] = LSW(MSD(sns_phys_address
));
1441 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1442 mcp
->in_mb
= MBX_0
|MBX_1
;
1443 mcp
->buf_size
= buf_size
;
1444 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
;
1445 mcp
->tov
= (vha
->hw
->login_timeout
* 2) + (vha
->hw
->login_timeout
/ 2);
1446 rval
= qla2x00_mailbox_command(vha
, mcp
);
1448 if (rval
!= QLA_SUCCESS
) {
1450 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1451 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1452 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1453 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1456 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", vha
->host_no
));
1463 qla24xx_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1464 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1468 struct logio_entry_24xx
*lg
;
1471 struct qla_hw_data
*ha
= vha
->hw
;
1473 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1475 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1477 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
1478 __func__
, vha
->host_no
));
1479 return QLA_MEMORY_ALLOC_FAILED
;
1481 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1483 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1484 lg
->entry_count
= 1;
1485 lg
->nport_handle
= cpu_to_le16(loop_id
);
1486 lg
->control_flags
= __constant_cpu_to_le16(LCF_COMMAND_PLOGI
);
1488 lg
->control_flags
|= __constant_cpu_to_le16(LCF_COND_PLOGI
);
1490 lg
->control_flags
|= __constant_cpu_to_le16(LCF_SKIP_PRLI
);
1491 lg
->port_id
[0] = al_pa
;
1492 lg
->port_id
[1] = area
;
1493 lg
->port_id
[2] = domain
;
1494 lg
->vp_index
= vha
->vp_idx
;
1495 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1496 if (rval
!= QLA_SUCCESS
) {
1497 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
1498 "(%x).\n", __func__
, vha
->host_no
, rval
));
1499 } else if (lg
->entry_status
!= 0) {
1500 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1501 "-- error status (%x).\n", __func__
, vha
->host_no
,
1503 rval
= QLA_FUNCTION_FAILED
;
1504 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1505 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1506 iop
[1] = le32_to_cpu(lg
->io_parameter
[1]);
1508 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1509 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1510 vha
->host_no
, le16_to_cpu(lg
->comp_status
), iop
[0],
1514 case LSC_SCODE_PORTID_USED
:
1515 mb
[0] = MBS_PORT_ID_USED
;
1516 mb
[1] = LSW(iop
[1]);
1518 case LSC_SCODE_NPORT_USED
:
1519 mb
[0] = MBS_LOOP_ID_USED
;
1521 case LSC_SCODE_NOLINK
:
1522 case LSC_SCODE_NOIOCB
:
1523 case LSC_SCODE_NOXCB
:
1524 case LSC_SCODE_CMD_FAILED
:
1525 case LSC_SCODE_NOFABRIC
:
1526 case LSC_SCODE_FW_NOT_READY
:
1527 case LSC_SCODE_NOT_LOGGED_IN
:
1528 case LSC_SCODE_NOPCB
:
1529 case LSC_SCODE_ELS_REJECT
:
1530 case LSC_SCODE_CMD_PARAM_ERR
:
1531 case LSC_SCODE_NONPORT
:
1532 case LSC_SCODE_LOGGED_IN
:
1533 case LSC_SCODE_NOFLOGI_ACC
:
1535 mb
[0] = MBS_COMMAND_ERROR
;
1539 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1541 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1543 mb
[0] = MBS_COMMAND_COMPLETE
;
1545 if (iop
[0] & BIT_4
) {
1551 /* Passback COS information. */
1553 if (lg
->io_parameter
[7] || lg
->io_parameter
[8])
1554 mb
[10] |= BIT_0
; /* Class 2. */
1555 if (lg
->io_parameter
[9] || lg
->io_parameter
[10])
1556 mb
[10] |= BIT_1
; /* Class 3. */
1559 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1565 * qla2x00_login_fabric
1566 * Issue login fabric port mailbox command.
1569 * ha = adapter block pointer.
1570 * loop_id = device loop ID.
1571 * domain = device domain.
1572 * area = device area.
1573 * al_pa = device AL_PA.
1574 * status = pointer for return status.
1575 * opt = command options.
1576 * TARGET_QUEUE_LOCK must be released.
1577 * ADAPTER_STATE_LOCK must be released.
1580 * qla2x00 local function return status code.
1586 qla2x00_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1587 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1591 mbx_cmd_t
*mcp
= &mc
;
1592 struct qla_hw_data
*ha
= vha
->hw
;
1594 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", vha
->host_no
));
1596 mcp
->mb
[0] = MBC_LOGIN_FABRIC_PORT
;
1597 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1598 if (HAS_EXTENDED_IDS(ha
)) {
1599 mcp
->mb
[1] = loop_id
;
1601 mcp
->out_mb
|= MBX_10
;
1603 mcp
->mb
[1] = (loop_id
<< 8) | opt
;
1605 mcp
->mb
[2] = domain
;
1606 mcp
->mb
[3] = area
<< 8 | al_pa
;
1608 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_2
|MBX_1
|MBX_0
;
1609 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1611 rval
= qla2x00_mailbox_command(vha
, mcp
);
1613 /* Return mailbox statuses. */
1620 /* COS retrieved from Get-Port-Database mailbox command. */
1624 if (rval
!= QLA_SUCCESS
) {
1625 /* RLU tmp code: need to change main mailbox_command function to
1626 * return ok even when the mailbox completion value is not
1627 * SUCCESS. The caller needs to be responsible to interpret
1628 * the return values of this mailbox command if we're not
1629 * to change too much of the existing code.
1631 if (mcp
->mb
[0] == 0x4001 || mcp
->mb
[0] == 0x4002 ||
1632 mcp
->mb
[0] == 0x4003 || mcp
->mb
[0] == 0x4005 ||
1633 mcp
->mb
[0] == 0x4006)
1637 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
1638 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", vha
->host_no
, rval
,
1639 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
1642 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
1650 * qla2x00_login_local_device
1651 * Issue login loop port mailbox command.
1654 * ha = adapter block pointer.
1655 * loop_id = device loop ID.
1656 * opt = command options.
1659 * Return status code.
1666 qla2x00_login_local_device(scsi_qla_host_t
*vha
, fc_port_t
*fcport
,
1667 uint16_t *mb_ret
, uint8_t opt
)
1671 mbx_cmd_t
*mcp
= &mc
;
1672 struct qla_hw_data
*ha
= vha
->hw
;
1674 if (IS_FWI2_CAPABLE(ha
))
1675 return qla24xx_login_fabric(vha
, fcport
->loop_id
,
1676 fcport
->d_id
.b
.domain
, fcport
->d_id
.b
.area
,
1677 fcport
->d_id
.b
.al_pa
, mb_ret
, opt
);
1679 DEBUG3(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1681 mcp
->mb
[0] = MBC_LOGIN_LOOP_PORT
;
1682 if (HAS_EXTENDED_IDS(ha
))
1683 mcp
->mb
[1] = fcport
->loop_id
;
1685 mcp
->mb
[1] = fcport
->loop_id
<< 8;
1687 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1688 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_1
|MBX_0
;
1689 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1691 rval
= qla2x00_mailbox_command(vha
, mcp
);
1693 /* Return mailbox statuses. */
1694 if (mb_ret
!= NULL
) {
1695 mb_ret
[0] = mcp
->mb
[0];
1696 mb_ret
[1] = mcp
->mb
[1];
1697 mb_ret
[6] = mcp
->mb
[6];
1698 mb_ret
[7] = mcp
->mb
[7];
1701 if (rval
!= QLA_SUCCESS
) {
1702 /* AV tmp code: need to change main mailbox_command function to
1703 * return ok even when the mailbox completion value is not
1704 * SUCCESS. The caller needs to be responsible to interpret
1705 * the return values of this mailbox command if we're not
1706 * to change too much of the existing code.
1708 if (mcp
->mb
[0] == 0x4005 || mcp
->mb
[0] == 0x4006)
1711 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1712 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1713 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1714 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1715 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1716 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1719 DEBUG3(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1726 qla24xx_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1727 uint8_t area
, uint8_t al_pa
)
1730 struct logio_entry_24xx
*lg
;
1732 struct qla_hw_data
*ha
= vha
->hw
;
1734 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1736 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1738 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
1739 __func__
, vha
->host_no
));
1740 return QLA_MEMORY_ALLOC_FAILED
;
1742 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1744 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1745 lg
->entry_count
= 1;
1746 lg
->nport_handle
= cpu_to_le16(loop_id
);
1748 __constant_cpu_to_le16(LCF_COMMAND_LOGO
|LCF_IMPL_LOGO
);
1749 lg
->port_id
[0] = al_pa
;
1750 lg
->port_id
[1] = area
;
1751 lg
->port_id
[2] = domain
;
1752 lg
->vp_index
= vha
->vp_idx
;
1754 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1755 if (rval
!= QLA_SUCCESS
) {
1756 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
1757 "(%x).\n", __func__
, vha
->host_no
, rval
));
1758 } else if (lg
->entry_status
!= 0) {
1759 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1760 "-- error status (%x).\n", __func__
, vha
->host_no
,
1762 rval
= QLA_FUNCTION_FAILED
;
1763 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1764 DEBUG2_3_11(printk("%s(%ld %d): failed to complete IOCB "
1765 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1766 vha
->host_no
, vha
->vp_idx
, le16_to_cpu(lg
->comp_status
),
1767 le32_to_cpu(lg
->io_parameter
[0]),
1768 le32_to_cpu(lg
->io_parameter
[1])));
1771 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1774 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1780 * qla2x00_fabric_logout
1781 * Issue logout fabric port mailbox command.
1784 * ha = adapter block pointer.
1785 * loop_id = device loop ID.
1786 * TARGET_QUEUE_LOCK must be released.
1787 * ADAPTER_STATE_LOCK must be released.
1790 * qla2x00 local function return status code.
1796 qla2x00_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1797 uint8_t area
, uint8_t al_pa
)
1801 mbx_cmd_t
*mcp
= &mc
;
1803 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
1806 mcp
->mb
[0] = MBC_LOGOUT_FABRIC_PORT
;
1807 mcp
->out_mb
= MBX_1
|MBX_0
;
1808 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1809 mcp
->mb
[1] = loop_id
;
1811 mcp
->out_mb
|= MBX_10
;
1813 mcp
->mb
[1] = loop_id
<< 8;
1816 mcp
->in_mb
= MBX_1
|MBX_0
;
1817 mcp
->tov
= MBX_TOV_SECONDS
;
1819 rval
= qla2x00_mailbox_command(vha
, mcp
);
1821 if (rval
!= QLA_SUCCESS
) {
1823 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
1824 "mbx1=%x.\n", vha
->host_no
, rval
, mcp
->mb
[1]));
1827 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
1835 * qla2x00_full_login_lip
1836 * Issue full login LIP mailbox command.
1839 * ha = adapter block pointer.
1840 * TARGET_QUEUE_LOCK must be released.
1841 * ADAPTER_STATE_LOCK must be released.
1844 * qla2x00 local function return status code.
1850 qla2x00_full_login_lip(scsi_qla_host_t
*vha
)
1854 mbx_cmd_t
*mcp
= &mc
;
1856 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
1859 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1860 mcp
->mb
[1] = IS_FWI2_CAPABLE(vha
->hw
) ? BIT_3
: 0;
1863 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1865 mcp
->tov
= MBX_TOV_SECONDS
;
1867 rval
= qla2x00_mailbox_command(vha
, mcp
);
1869 if (rval
!= QLA_SUCCESS
) {
1871 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
1872 vha
->host_no
, rval
));
1875 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
1883 * qla2x00_get_id_list
1886 * ha = adapter block pointer.
1889 * qla2x00 local function return status code.
1895 qla2x00_get_id_list(scsi_qla_host_t
*vha
, void *id_list
, dma_addr_t id_list_dma
,
1900 mbx_cmd_t
*mcp
= &mc
;
1902 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
1905 if (id_list
== NULL
)
1906 return QLA_FUNCTION_FAILED
;
1908 mcp
->mb
[0] = MBC_GET_ID_LIST
;
1909 mcp
->out_mb
= MBX_0
;
1910 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1911 mcp
->mb
[2] = MSW(id_list_dma
);
1912 mcp
->mb
[3] = LSW(id_list_dma
);
1913 mcp
->mb
[6] = MSW(MSD(id_list_dma
));
1914 mcp
->mb
[7] = LSW(MSD(id_list_dma
));
1916 mcp
->mb
[9] = vha
->vp_idx
;
1917 mcp
->out_mb
|= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
;
1919 mcp
->mb
[1] = MSW(id_list_dma
);
1920 mcp
->mb
[2] = LSW(id_list_dma
);
1921 mcp
->mb
[3] = MSW(MSD(id_list_dma
));
1922 mcp
->mb
[6] = LSW(MSD(id_list_dma
));
1923 mcp
->out_mb
|= MBX_6
|MBX_3
|MBX_2
|MBX_1
;
1925 mcp
->in_mb
= MBX_1
|MBX_0
;
1926 mcp
->tov
= MBX_TOV_SECONDS
;
1928 rval
= qla2x00_mailbox_command(vha
, mcp
);
1930 if (rval
!= QLA_SUCCESS
) {
1932 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
1933 vha
->host_no
, rval
));
1935 *entries
= mcp
->mb
[1];
1936 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
1944 * qla2x00_get_resource_cnts
1945 * Get current firmware resource counts.
1948 * ha = adapter block pointer.
1951 * qla2x00 local function return status code.
1957 qla2x00_get_resource_cnts(scsi_qla_host_t
*vha
, uint16_t *cur_xchg_cnt
,
1958 uint16_t *orig_xchg_cnt
, uint16_t *cur_iocb_cnt
,
1959 uint16_t *orig_iocb_cnt
, uint16_t *max_npiv_vports
)
1963 mbx_cmd_t
*mcp
= &mc
;
1965 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1967 mcp
->mb
[0] = MBC_GET_RESOURCE_COUNTS
;
1968 mcp
->out_mb
= MBX_0
;
1969 mcp
->in_mb
= MBX_11
|MBX_10
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1970 mcp
->tov
= MBX_TOV_SECONDS
;
1972 rval
= qla2x00_mailbox_command(vha
, mcp
);
1974 if (rval
!= QLA_SUCCESS
) {
1976 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__
,
1977 vha
->host_no
, mcp
->mb
[0]));
1979 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
1980 "mb7=%x mb10=%x mb11=%x.\n", __func__
, vha
->host_no
,
1981 mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3], mcp
->mb
[6], mcp
->mb
[7],
1982 mcp
->mb
[10], mcp
->mb
[11]));
1985 *cur_xchg_cnt
= mcp
->mb
[3];
1987 *orig_xchg_cnt
= mcp
->mb
[6];
1989 *cur_iocb_cnt
= mcp
->mb
[7];
1991 *orig_iocb_cnt
= mcp
->mb
[10];
1992 if (vha
->hw
->flags
.npiv_supported
&& max_npiv_vports
)
1993 *max_npiv_vports
= mcp
->mb
[11];
1999 #if defined(QL_DEBUG_LEVEL_3)
2001 * qla2x00_get_fcal_position_map
2002 * Get FCAL (LILP) position map using mailbox command
2005 * ha = adapter state pointer.
2006 * pos_map = buffer pointer (can be NULL).
2009 * qla2x00 local function return status code.
2015 qla2x00_get_fcal_position_map(scsi_qla_host_t
*vha
, char *pos_map
)
2019 mbx_cmd_t
*mcp
= &mc
;
2021 dma_addr_t pmap_dma
;
2022 struct qla_hw_data
*ha
= vha
->hw
;
2024 pmap
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pmap_dma
);
2026 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
2027 __func__
, vha
->host_no
));
2028 return QLA_MEMORY_ALLOC_FAILED
;
2030 memset(pmap
, 0, FCAL_MAP_SIZE
);
2032 mcp
->mb
[0] = MBC_GET_FC_AL_POSITION_MAP
;
2033 mcp
->mb
[2] = MSW(pmap_dma
);
2034 mcp
->mb
[3] = LSW(pmap_dma
);
2035 mcp
->mb
[6] = MSW(MSD(pmap_dma
));
2036 mcp
->mb
[7] = LSW(MSD(pmap_dma
));
2037 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2038 mcp
->in_mb
= MBX_1
|MBX_0
;
2039 mcp
->buf_size
= FCAL_MAP_SIZE
;
2040 mcp
->flags
= MBX_DMA_IN
;
2041 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
2042 rval
= qla2x00_mailbox_command(vha
, mcp
);
2044 if (rval
== QLA_SUCCESS
) {
2045 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
2046 "size (%x)\n", __func__
, vha
->host_no
, mcp
->mb
[0],
2047 mcp
->mb
[1], (unsigned)pmap
[0]));
2048 DEBUG11(qla2x00_dump_buffer(pmap
, pmap
[0] + 1));
2051 memcpy(pos_map
, pmap
, FCAL_MAP_SIZE
);
2053 dma_pool_free(ha
->s_dma_pool
, pmap
, pmap_dma
);
2055 if (rval
!= QLA_SUCCESS
) {
2056 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2057 vha
->host_no
, rval
));
2059 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2067 * qla2x00_get_link_status
2070 * ha = adapter block pointer.
2071 * loop_id = device loop ID.
2072 * ret_buf = pointer to link status return buffer.
2076 * BIT_0 = mem alloc error.
2077 * BIT_1 = mailbox error.
2080 qla2x00_get_link_status(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2081 struct link_statistics
*stats
, dma_addr_t stats_dma
)
2085 mbx_cmd_t
*mcp
= &mc
;
2086 uint32_t *siter
, *diter
, dwords
;
2087 struct qla_hw_data
*ha
= vha
->hw
;
2089 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2091 mcp
->mb
[0] = MBC_GET_LINK_STATUS
;
2092 mcp
->mb
[2] = MSW(stats_dma
);
2093 mcp
->mb
[3] = LSW(stats_dma
);
2094 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2095 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2096 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2098 if (IS_FWI2_CAPABLE(ha
)) {
2099 mcp
->mb
[1] = loop_id
;
2102 mcp
->out_mb
|= MBX_10
|MBX_4
|MBX_1
;
2103 mcp
->in_mb
|= MBX_1
;
2104 } else if (HAS_EXTENDED_IDS(ha
)) {
2105 mcp
->mb
[1] = loop_id
;
2107 mcp
->out_mb
|= MBX_10
|MBX_1
;
2109 mcp
->mb
[1] = loop_id
<< 8;
2110 mcp
->out_mb
|= MBX_1
;
2112 mcp
->tov
= MBX_TOV_SECONDS
;
2113 mcp
->flags
= IOCTL_CMD
;
2114 rval
= qla2x00_mailbox_command(vha
, mcp
);
2116 if (rval
== QLA_SUCCESS
) {
2117 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2118 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2119 __func__
, vha
->host_no
, mcp
->mb
[0]));
2120 rval
= QLA_FUNCTION_FAILED
;
2122 /* Copy over data -- firmware data is LE. */
2123 dwords
= offsetof(struct link_statistics
, unused1
) / 4;
2124 siter
= diter
= &stats
->link_fail_cnt
;
2126 *diter
++ = le32_to_cpu(*siter
++);
2130 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2131 vha
->host_no
, rval
));
2138 qla24xx_get_isp_stats(scsi_qla_host_t
*vha
, struct link_statistics
*stats
,
2139 dma_addr_t stats_dma
)
2143 mbx_cmd_t
*mcp
= &mc
;
2144 uint32_t *siter
, *diter
, dwords
;
2146 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2148 mcp
->mb
[0] = MBC_GET_LINK_PRIV_STATS
;
2149 mcp
->mb
[2] = MSW(stats_dma
);
2150 mcp
->mb
[3] = LSW(stats_dma
);
2151 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2152 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2153 mcp
->mb
[8] = sizeof(struct link_statistics
) / 4;
2154 mcp
->mb
[9] = vha
->vp_idx
;
2156 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2157 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
2158 mcp
->tov
= MBX_TOV_SECONDS
;
2159 mcp
->flags
= IOCTL_CMD
;
2160 rval
= qla2x00_mailbox_command(vha
, mcp
);
2162 if (rval
== QLA_SUCCESS
) {
2163 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2164 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2165 __func__
, vha
->host_no
, mcp
->mb
[0]));
2166 rval
= QLA_FUNCTION_FAILED
;
2168 /* Copy over data -- firmware data is LE. */
2169 dwords
= sizeof(struct link_statistics
) / 4;
2170 siter
= diter
= &stats
->link_fail_cnt
;
2172 *diter
++ = le32_to_cpu(*siter
++);
2176 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2177 vha
->host_no
, rval
));
2184 qla24xx_abort_command(scsi_qla_host_t
*vha
, srb_t
*sp
, struct req_que
*req
)
2188 unsigned long flags
= 0;
2190 struct abort_entry_24xx
*abt
;
2193 struct qla_hw_data
*ha
= vha
->hw
;
2195 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2197 fcport
= sp
->fcport
;
2199 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
2200 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
2201 if (req
->outstanding_cmds
[handle
] == sp
)
2204 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
2205 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
2206 /* Command not found. */
2207 return QLA_FUNCTION_FAILED
;
2210 abt
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &abt_dma
);
2212 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
2213 __func__
, vha
->host_no
));
2214 return QLA_MEMORY_ALLOC_FAILED
;
2216 memset(abt
, 0, sizeof(struct abort_entry_24xx
));
2218 abt
->entry_type
= ABORT_IOCB_TYPE
;
2219 abt
->entry_count
= 1;
2220 abt
->nport_handle
= cpu_to_le16(fcport
->loop_id
);
2221 abt
->handle_to_abort
= handle
;
2222 abt
->port_id
[0] = fcport
->d_id
.b
.al_pa
;
2223 abt
->port_id
[1] = fcport
->d_id
.b
.area
;
2224 abt
->port_id
[2] = fcport
->d_id
.b
.domain
;
2225 abt
->vp_index
= fcport
->vp_idx
;
2227 abt
->req_que_no
= cpu_to_le16(req
->id
);
2229 rval
= qla2x00_issue_iocb(vha
, abt
, abt_dma
, 0);
2230 if (rval
!= QLA_SUCCESS
) {
2231 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
2232 __func__
, vha
->host_no
, rval
));
2233 } else if (abt
->entry_status
!= 0) {
2234 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2235 "-- error status (%x).\n", __func__
, vha
->host_no
,
2236 abt
->entry_status
));
2237 rval
= QLA_FUNCTION_FAILED
;
2238 } else if (abt
->nport_handle
!= __constant_cpu_to_le16(0)) {
2239 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2240 "-- completion status (%x).\n", __func__
, vha
->host_no
,
2241 le16_to_cpu(abt
->nport_handle
)));
2242 rval
= QLA_FUNCTION_FAILED
;
2244 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2247 dma_pool_free(ha
->s_dma_pool
, abt
, abt_dma
);
2252 struct tsk_mgmt_cmd
{
2254 struct tsk_mgmt_entry tsk
;
2255 struct sts_entry_24xx sts
;
2260 __qla24xx_issue_tmf(char *name
, uint32_t type
, struct fc_port
*fcport
,
2264 struct tsk_mgmt_cmd
*tsk
;
2266 scsi_qla_host_t
*vha
;
2267 struct qla_hw_data
*ha
;
2268 struct req_que
*req
;
2269 struct rsp_que
*rsp
;
2271 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
2275 req
= ha
->req_q_map
[0];
2276 rsp
= ha
->rsp_q_map
[0];
2277 tsk
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &tsk_dma
);
2279 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
2280 "IOCB.\n", __func__
, vha
->host_no
));
2281 return QLA_MEMORY_ALLOC_FAILED
;
2283 memset(tsk
, 0, sizeof(struct tsk_mgmt_cmd
));
2285 tsk
->p
.tsk
.entry_type
= TSK_MGMT_IOCB_TYPE
;
2286 tsk
->p
.tsk
.entry_count
= 1;
2287 tsk
->p
.tsk
.nport_handle
= cpu_to_le16(fcport
->loop_id
);
2288 tsk
->p
.tsk
.timeout
= cpu_to_le16(ha
->r_a_tov
/ 10 * 2);
2289 tsk
->p
.tsk
.control_flags
= cpu_to_le32(type
);
2290 tsk
->p
.tsk
.port_id
[0] = fcport
->d_id
.b
.al_pa
;
2291 tsk
->p
.tsk
.port_id
[1] = fcport
->d_id
.b
.area
;
2292 tsk
->p
.tsk
.port_id
[2] = fcport
->d_id
.b
.domain
;
2293 tsk
->p
.tsk
.vp_index
= fcport
->vp_idx
;
2294 if (type
== TCF_LUN_RESET
) {
2295 int_to_scsilun(l
, &tsk
->p
.tsk
.lun
);
2296 host_to_fcp_swap((uint8_t *)&tsk
->p
.tsk
.lun
,
2297 sizeof(tsk
->p
.tsk
.lun
));
2300 rval
= qla2x00_issue_iocb(vha
, tsk
, tsk_dma
, 0);
2301 if (rval
!= QLA_SUCCESS
) {
2302 DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB "
2303 "(%x).\n", __func__
, vha
->host_no
, name
, rval
));
2304 } else if (tsk
->p
.sts
.entry_status
!= 0) {
2305 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2306 "-- error status (%x).\n", __func__
, vha
->host_no
,
2307 tsk
->p
.sts
.entry_status
));
2308 rval
= QLA_FUNCTION_FAILED
;
2309 } else if (tsk
->p
.sts
.comp_status
!=
2310 __constant_cpu_to_le16(CS_COMPLETE
)) {
2311 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2312 "-- completion status (%x).\n", __func__
,
2313 vha
->host_no
, le16_to_cpu(tsk
->p
.sts
.comp_status
)));
2314 rval
= QLA_FUNCTION_FAILED
;
2317 /* Issue marker IOCB. */
2318 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
2319 type
== TCF_LUN_RESET
? MK_SYNC_ID_LUN
: MK_SYNC_ID
);
2320 if (rval2
!= QLA_SUCCESS
) {
2321 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
2322 "(%x).\n", __func__
, vha
->host_no
, rval2
));
2324 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2327 dma_pool_free(ha
->s_dma_pool
, tsk
, tsk_dma
);
2333 qla24xx_abort_target(struct fc_port
*fcport
, unsigned int l
)
2335 return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET
, fcport
, l
);
2339 qla24xx_lun_reset(struct fc_port
*fcport
, unsigned int l
)
2341 return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET
, fcport
, l
);
2345 qla2x00_system_error(scsi_qla_host_t
*vha
)
2349 mbx_cmd_t
*mcp
= &mc
;
2350 struct qla_hw_data
*ha
= vha
->hw
;
2352 if (!IS_QLA23XX(ha
) && !IS_FWI2_CAPABLE(ha
))
2353 return QLA_FUNCTION_FAILED
;
2355 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2357 mcp
->mb
[0] = MBC_GEN_SYSTEM_ERROR
;
2358 mcp
->out_mb
= MBX_0
;
2362 rval
= qla2x00_mailbox_command(vha
, mcp
);
2364 if (rval
!= QLA_SUCCESS
) {
2365 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2366 vha
->host_no
, rval
));
2368 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2375 * qla2x00_set_serdes_params() -
2381 qla2x00_set_serdes_params(scsi_qla_host_t
*vha
, uint16_t sw_em_1g
,
2382 uint16_t sw_em_2g
, uint16_t sw_em_4g
)
2386 mbx_cmd_t
*mcp
= &mc
;
2388 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2390 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2392 mcp
->mb
[2] = sw_em_1g
| BIT_15
;
2393 mcp
->mb
[3] = sw_em_2g
| BIT_15
;
2394 mcp
->mb
[4] = sw_em_4g
| BIT_15
;
2395 mcp
->out_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2397 mcp
->tov
= MBX_TOV_SECONDS
;
2399 rval
= qla2x00_mailbox_command(vha
, mcp
);
2401 if (rval
!= QLA_SUCCESS
) {
2403 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2404 vha
->host_no
, rval
, mcp
->mb
[0]));
2407 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2414 qla2x00_stop_firmware(scsi_qla_host_t
*vha
)
2418 mbx_cmd_t
*mcp
= &mc
;
2420 if (!IS_FWI2_CAPABLE(vha
->hw
))
2421 return QLA_FUNCTION_FAILED
;
2423 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2425 mcp
->mb
[0] = MBC_STOP_FIRMWARE
;
2426 mcp
->out_mb
= MBX_0
;
2430 rval
= qla2x00_mailbox_command(vha
, mcp
);
2432 if (rval
!= QLA_SUCCESS
) {
2433 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2434 vha
->host_no
, rval
));
2436 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2443 qla2x00_enable_eft_trace(scsi_qla_host_t
*vha
, dma_addr_t eft_dma
,
2448 mbx_cmd_t
*mcp
= &mc
;
2450 if (!IS_FWI2_CAPABLE(vha
->hw
))
2451 return QLA_FUNCTION_FAILED
;
2453 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2455 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2456 mcp
->mb
[1] = TC_EFT_ENABLE
;
2457 mcp
->mb
[2] = LSW(eft_dma
);
2458 mcp
->mb
[3] = MSW(eft_dma
);
2459 mcp
->mb
[4] = LSW(MSD(eft_dma
));
2460 mcp
->mb
[5] = MSW(MSD(eft_dma
));
2461 mcp
->mb
[6] = buffers
;
2462 mcp
->mb
[7] = TC_AEN_DISABLE
;
2463 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2464 mcp
->in_mb
= MBX_1
|MBX_0
;
2465 mcp
->tov
= MBX_TOV_SECONDS
;
2467 rval
= qla2x00_mailbox_command(vha
, mcp
);
2468 if (rval
!= QLA_SUCCESS
) {
2469 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2470 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2472 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2479 qla2x00_disable_eft_trace(scsi_qla_host_t
*vha
)
2483 mbx_cmd_t
*mcp
= &mc
;
2485 if (!IS_FWI2_CAPABLE(vha
->hw
))
2486 return QLA_FUNCTION_FAILED
;
2488 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2490 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2491 mcp
->mb
[1] = TC_EFT_DISABLE
;
2492 mcp
->out_mb
= MBX_1
|MBX_0
;
2493 mcp
->in_mb
= MBX_1
|MBX_0
;
2494 mcp
->tov
= MBX_TOV_SECONDS
;
2496 rval
= qla2x00_mailbox_command(vha
, mcp
);
2497 if (rval
!= QLA_SUCCESS
) {
2498 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2499 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2501 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2508 qla2x00_enable_fce_trace(scsi_qla_host_t
*vha
, dma_addr_t fce_dma
,
2509 uint16_t buffers
, uint16_t *mb
, uint32_t *dwords
)
2513 mbx_cmd_t
*mcp
= &mc
;
2515 if (!IS_QLA25XX(vha
->hw
))
2516 return QLA_FUNCTION_FAILED
;
2518 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2520 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2521 mcp
->mb
[1] = TC_FCE_ENABLE
;
2522 mcp
->mb
[2] = LSW(fce_dma
);
2523 mcp
->mb
[3] = MSW(fce_dma
);
2524 mcp
->mb
[4] = LSW(MSD(fce_dma
));
2525 mcp
->mb
[5] = MSW(MSD(fce_dma
));
2526 mcp
->mb
[6] = buffers
;
2527 mcp
->mb
[7] = TC_AEN_DISABLE
;
2529 mcp
->mb
[9] = TC_FCE_DEFAULT_RX_SIZE
;
2530 mcp
->mb
[10] = TC_FCE_DEFAULT_TX_SIZE
;
2531 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2533 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2534 mcp
->tov
= MBX_TOV_SECONDS
;
2536 rval
= qla2x00_mailbox_command(vha
, mcp
);
2537 if (rval
!= QLA_SUCCESS
) {
2538 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2539 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2541 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2544 memcpy(mb
, mcp
->mb
, 8 * sizeof(*mb
));
2553 qla2x00_disable_fce_trace(scsi_qla_host_t
*vha
, uint64_t *wr
, uint64_t *rd
)
2557 mbx_cmd_t
*mcp
= &mc
;
2559 if (!IS_FWI2_CAPABLE(vha
->hw
))
2560 return QLA_FUNCTION_FAILED
;
2562 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2564 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2565 mcp
->mb
[1] = TC_FCE_DISABLE
;
2566 mcp
->mb
[2] = TC_FCE_DISABLE_TRACE
;
2567 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
2568 mcp
->in_mb
= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2570 mcp
->tov
= MBX_TOV_SECONDS
;
2572 rval
= qla2x00_mailbox_command(vha
, mcp
);
2573 if (rval
!= QLA_SUCCESS
) {
2574 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2575 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2577 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2580 *wr
= (uint64_t) mcp
->mb
[5] << 48 |
2581 (uint64_t) mcp
->mb
[4] << 32 |
2582 (uint64_t) mcp
->mb
[3] << 16 |
2583 (uint64_t) mcp
->mb
[2];
2585 *rd
= (uint64_t) mcp
->mb
[9] << 48 |
2586 (uint64_t) mcp
->mb
[8] << 32 |
2587 (uint64_t) mcp
->mb
[7] << 16 |
2588 (uint64_t) mcp
->mb
[6];
2595 qla2x00_read_sfp(scsi_qla_host_t
*vha
, dma_addr_t sfp_dma
, uint16_t addr
,
2596 uint16_t off
, uint16_t count
)
2600 mbx_cmd_t
*mcp
= &mc
;
2602 if (!IS_FWI2_CAPABLE(vha
->hw
))
2603 return QLA_FUNCTION_FAILED
;
2605 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2607 mcp
->mb
[0] = MBC_READ_SFP
;
2609 mcp
->mb
[2] = MSW(sfp_dma
);
2610 mcp
->mb
[3] = LSW(sfp_dma
);
2611 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
2612 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
2616 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2618 mcp
->tov
= MBX_TOV_SECONDS
;
2620 rval
= qla2x00_mailbox_command(vha
, mcp
);
2622 if (rval
!= QLA_SUCCESS
) {
2623 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2624 vha
->host_no
, rval
, mcp
->mb
[0]));
2626 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2633 qla2x00_set_idma_speed(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2634 uint16_t port_speed
, uint16_t *mb
)
2638 mbx_cmd_t
*mcp
= &mc
;
2640 if (!IS_IIDMA_CAPABLE(vha
->hw
))
2641 return QLA_FUNCTION_FAILED
;
2643 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2645 mcp
->mb
[0] = MBC_PORT_PARAMS
;
2646 mcp
->mb
[1] = loop_id
;
2648 mcp
->mb
[3] = port_speed
& (BIT_2
|BIT_1
|BIT_0
);
2649 mcp
->mb
[4] = mcp
->mb
[5] = 0;
2650 mcp
->out_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2651 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_1
|MBX_0
;
2652 mcp
->tov
= MBX_TOV_SECONDS
;
2654 rval
= qla2x00_mailbox_command(vha
, mcp
);
2656 /* Return mailbox statuses. */
2665 if (rval
!= QLA_SUCCESS
) {
2666 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2667 vha
->host_no
, rval
));
2669 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2676 qla24xx_report_id_acquisition(scsi_qla_host_t
*vha
,
2677 struct vp_rpt_id_entry_24xx
*rptid_entry
)
2680 uint16_t stat
= le16_to_cpu(rptid_entry
->vp_idx
);
2681 struct qla_hw_data
*ha
= vha
->hw
;
2682 scsi_qla_host_t
*vp
;
2684 if (rptid_entry
->entry_status
!= 0)
2687 if (rptid_entry
->format
== 0) {
2688 DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d,"
2689 " number of VPs acquired %d\n", __func__
, vha
->host_no
,
2690 MSB(rptid_entry
->vp_count
), LSB(rptid_entry
->vp_count
)));
2691 DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__
,
2692 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2693 rptid_entry
->port_id
[0]));
2694 } else if (rptid_entry
->format
== 1) {
2696 DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled "
2698 "with port id %02x%02x%02x\n", __func__
, vha
->host_no
,
2700 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2701 rptid_entry
->port_id
[0]));
2708 list_for_each_entry(vp
, &ha
->vp_list
, list
)
2709 if (vp_idx
== vp
->vp_idx
)
2714 vp
->d_id
.b
.domain
= rptid_entry
->port_id
[2];
2715 vp
->d_id
.b
.area
= rptid_entry
->port_id
[1];
2716 vp
->d_id
.b
.al_pa
= rptid_entry
->port_id
[0];
2719 * Cannot configure here as we are still sitting on the
2720 * response queue. Handle it in dpc context.
2722 set_bit(VP_IDX_ACQUIRED
, &vp
->vp_flags
);
2723 set_bit(VP_DPC_NEEDED
, &vha
->dpc_flags
);
2725 qla2xxx_wake_dpc(vha
);
2730 * qla24xx_modify_vp_config
2731 * Change VP configuration for vha
2734 * vha = adapter block pointer.
2737 * qla2xxx local function return status code.
2743 qla24xx_modify_vp_config(scsi_qla_host_t
*vha
)
2746 struct vp_config_entry_24xx
*vpmod
;
2747 dma_addr_t vpmod_dma
;
2748 struct qla_hw_data
*ha
= vha
->hw
;
2749 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2751 /* This can be called by the parent */
2753 vpmod
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vpmod_dma
);
2755 DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP "
2756 "IOCB.\n", __func__
, vha
->host_no
));
2757 return QLA_MEMORY_ALLOC_FAILED
;
2760 memset(vpmod
, 0, sizeof(struct vp_config_entry_24xx
));
2761 vpmod
->entry_type
= VP_CONFIG_IOCB_TYPE
;
2762 vpmod
->entry_count
= 1;
2763 vpmod
->command
= VCT_COMMAND_MOD_ENABLE_VPS
;
2764 vpmod
->vp_count
= 1;
2765 vpmod
->vp_index1
= vha
->vp_idx
;
2766 vpmod
->options_idx1
= BIT_3
|BIT_4
|BIT_5
;
2767 memcpy(vpmod
->node_name_idx1
, vha
->node_name
, WWN_SIZE
);
2768 memcpy(vpmod
->port_name_idx1
, vha
->port_name
, WWN_SIZE
);
2769 vpmod
->entry_count
= 1;
2771 rval
= qla2x00_issue_iocb(base_vha
, vpmod
, vpmod_dma
, 0);
2772 if (rval
!= QLA_SUCCESS
) {
2773 DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB"
2774 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2775 } else if (vpmod
->comp_status
!= 0) {
2776 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2777 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2778 vpmod
->comp_status
));
2779 rval
= QLA_FUNCTION_FAILED
;
2780 } else if (vpmod
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2781 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2782 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2783 le16_to_cpu(vpmod
->comp_status
)));
2784 rval
= QLA_FUNCTION_FAILED
;
2787 DEBUG11(printk("%s(%ld): done.\n", __func__
,
2788 base_vha
->host_no
));
2789 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_INITIALIZING
);
2791 dma_pool_free(ha
->s_dma_pool
, vpmod
, vpmod_dma
);
2797 * qla24xx_control_vp
2798 * Enable a virtual port for given host
2801 * ha = adapter block pointer.
2802 * vhba = virtual adapter (unused)
2803 * index = index number for enabled VP
2806 * qla2xxx local function return status code.
2812 qla24xx_control_vp(scsi_qla_host_t
*vha
, int cmd
)
2816 struct vp_ctrl_entry_24xx
*vce
;
2818 struct qla_hw_data
*ha
= vha
->hw
;
2819 int vp_index
= vha
->vp_idx
;
2820 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2822 DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__
,
2823 vha
->host_no
, vp_index
));
2825 if (vp_index
== 0 || vp_index
>= ha
->max_npiv_vports
)
2826 return QLA_PARAMETER_ERROR
;
2828 vce
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vce_dma
);
2830 DEBUG2_3(printk("%s(%ld): "
2831 "failed to allocate VP Control IOCB.\n", __func__
,
2832 base_vha
->host_no
));
2833 return QLA_MEMORY_ALLOC_FAILED
;
2835 memset(vce
, 0, sizeof(struct vp_ctrl_entry_24xx
));
2837 vce
->entry_type
= VP_CTRL_IOCB_TYPE
;
2838 vce
->entry_count
= 1;
2839 vce
->command
= cpu_to_le16(cmd
);
2840 vce
->vp_count
= __constant_cpu_to_le16(1);
2842 /* index map in firmware starts with 1; decrement index
2843 * this is ok as we never use index 0
2845 map
= (vp_index
- 1) / 8;
2846 pos
= (vp_index
- 1) & 7;
2847 mutex_lock(&ha
->vport_lock
);
2848 vce
->vp_idx_map
[map
] |= 1 << pos
;
2849 mutex_unlock(&ha
->vport_lock
);
2851 rval
= qla2x00_issue_iocb(base_vha
, vce
, vce_dma
, 0);
2852 if (rval
!= QLA_SUCCESS
) {
2853 DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB"
2854 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2855 printk("%s(%ld): failed to issue VP control IOCB"
2856 "(%x).\n", __func__
, base_vha
->host_no
, rval
);
2857 } else if (vce
->entry_status
!= 0) {
2858 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2859 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2860 vce
->entry_status
));
2861 printk("%s(%ld): failed to complete IOCB "
2862 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2864 rval
= QLA_FUNCTION_FAILED
;
2865 } else if (vce
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2866 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2867 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2868 le16_to_cpu(vce
->comp_status
)));
2869 printk("%s(%ld): failed to complete IOCB "
2870 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2871 le16_to_cpu(vce
->comp_status
));
2872 rval
= QLA_FUNCTION_FAILED
;
2874 DEBUG2(printk("%s(%ld): done.\n", __func__
, base_vha
->host_no
));
2877 dma_pool_free(ha
->s_dma_pool
, vce
, vce_dma
);
2883 * qla2x00_send_change_request
2884 * Receive or disable RSCN request from fabric controller
2887 * ha = adapter block pointer
2888 * format = registration format:
2890 * 1 - Fabric detected registration
2891 * 2 - N_port detected registration
2892 * 3 - Full registration
2893 * FF - clear registration
2894 * vp_idx = Virtual port index
2897 * qla2x00 local function return status code.
2904 qla2x00_send_change_request(scsi_qla_host_t
*vha
, uint16_t format
,
2909 mbx_cmd_t
*mcp
= &mc
;
2912 * This command is implicitly executed by firmware during login for the
2916 return QLA_FUNCTION_FAILED
;
2918 mcp
->mb
[0] = MBC_SEND_CHANGE_REQUEST
;
2919 mcp
->mb
[1] = format
;
2920 mcp
->mb
[9] = vp_idx
;
2921 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
2922 mcp
->in_mb
= MBX_0
|MBX_1
;
2923 mcp
->tov
= MBX_TOV_SECONDS
;
2925 rval
= qla2x00_mailbox_command(vha
, mcp
);
2927 if (rval
== QLA_SUCCESS
) {
2928 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2938 qla2x00_dump_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t addr
,
2943 mbx_cmd_t
*mcp
= &mc
;
2945 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2947 if (MSW(addr
) || IS_FWI2_CAPABLE(vha
->hw
)) {
2948 mcp
->mb
[0] = MBC_DUMP_RISC_RAM_EXTENDED
;
2949 mcp
->mb
[8] = MSW(addr
);
2950 mcp
->out_mb
= MBX_8
|MBX_0
;
2952 mcp
->mb
[0] = MBC_DUMP_RISC_RAM
;
2953 mcp
->out_mb
= MBX_0
;
2955 mcp
->mb
[1] = LSW(addr
);
2956 mcp
->mb
[2] = MSW(req_dma
);
2957 mcp
->mb
[3] = LSW(req_dma
);
2958 mcp
->mb
[6] = MSW(MSD(req_dma
));
2959 mcp
->mb
[7] = LSW(MSD(req_dma
));
2960 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
2961 if (IS_FWI2_CAPABLE(vha
->hw
)) {
2962 mcp
->mb
[4] = MSW(size
);
2963 mcp
->mb
[5] = LSW(size
);
2964 mcp
->out_mb
|= MBX_5
|MBX_4
;
2966 mcp
->mb
[4] = LSW(size
);
2967 mcp
->out_mb
|= MBX_4
;
2971 mcp
->tov
= MBX_TOV_SECONDS
;
2973 rval
= qla2x00_mailbox_command(vha
, mcp
);
2975 if (rval
!= QLA_SUCCESS
) {
2976 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
2977 vha
->host_no
, rval
, mcp
->mb
[0]));
2979 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2985 /* 84XX Support **************************************************************/
2987 struct cs84xx_mgmt_cmd
{
2989 struct verify_chip_entry_84xx req
;
2990 struct verify_chip_rsp_84xx rsp
;
2995 qla84xx_verify_chip(struct scsi_qla_host
*vha
, uint16_t *status
)
2998 struct cs84xx_mgmt_cmd
*mn
;
3001 unsigned long flags
;
3002 struct qla_hw_data
*ha
= vha
->hw
;
3004 DEBUG16(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3006 mn
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &mn_dma
);
3008 DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX "
3009 "IOCB.\n", __func__
, vha
->host_no
));
3010 return QLA_MEMORY_ALLOC_FAILED
;
3014 options
= ha
->cs84xx
->fw_update
? VCO_FORCE_UPDATE
: 0;
3015 /* Diagnostic firmware? */
3016 /* options |= MENLO_DIAG_FW; */
3017 /* We update the firmware with only one data sequence. */
3018 options
|= VCO_END_OF_DATA
;
3022 memset(mn
, 0, sizeof(*mn
));
3023 mn
->p
.req
.entry_type
= VERIFY_CHIP_IOCB_TYPE
;
3024 mn
->p
.req
.entry_count
= 1;
3025 mn
->p
.req
.options
= cpu_to_le16(options
);
3027 DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__
,
3029 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3032 rval
= qla2x00_issue_iocb_timeout(vha
, mn
, mn_dma
, 0, 120);
3033 if (rval
!= QLA_SUCCESS
) {
3034 DEBUG2_16(printk("%s(%ld): failed to issue Verify "
3035 "IOCB (%x).\n", __func__
, vha
->host_no
, rval
));
3039 DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__
,
3041 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3044 status
[0] = le16_to_cpu(mn
->p
.rsp
.comp_status
);
3045 status
[1] = status
[0] == CS_VCS_CHIP_FAILURE
?
3046 le16_to_cpu(mn
->p
.rsp
.failure_code
) : 0;
3047 DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__
,
3048 vha
->host_no
, status
[0], status
[1]));
3050 if (status
[0] != CS_COMPLETE
) {
3051 rval
= QLA_FUNCTION_FAILED
;
3052 if (!(options
& VCO_DONT_UPDATE_FW
)) {
3053 DEBUG2_16(printk("%s(%ld): Firmware update "
3054 "failed. Retrying without update "
3055 "firmware.\n", __func__
, vha
->host_no
));
3056 options
|= VCO_DONT_UPDATE_FW
;
3057 options
&= ~VCO_FORCE_UPDATE
;
3061 DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n",
3062 __func__
, vha
->host_no
,
3063 le32_to_cpu(mn
->p
.rsp
.fw_ver
)));
3065 /* NOTE: we only update OP firmware. */
3066 spin_lock_irqsave(&ha
->cs84xx
->access_lock
, flags
);
3067 ha
->cs84xx
->op_fw_version
=
3068 le32_to_cpu(mn
->p
.rsp
.fw_ver
);
3069 spin_unlock_irqrestore(&ha
->cs84xx
->access_lock
,
3075 dma_pool_free(ha
->s_dma_pool
, mn
, mn_dma
);
3077 if (rval
!= QLA_SUCCESS
) {
3078 DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__
,
3079 vha
->host_no
, rval
));
3081 DEBUG16(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3088 qla25xx_init_req_que(struct scsi_qla_host
*vha
, struct req_que
*req
,
3092 unsigned long flags
;
3094 mbx_cmd_t
*mcp
= &mc
;
3095 struct device_reg_25xxmq __iomem
*reg
;
3096 struct qla_hw_data
*ha
= vha
->hw
;
3098 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3099 mcp
->mb
[1] = options
;
3100 mcp
->mb
[2] = MSW(LSD(req
->dma
));
3101 mcp
->mb
[3] = LSW(LSD(req
->dma
));
3102 mcp
->mb
[6] = MSW(MSD(req
->dma
));
3103 mcp
->mb
[7] = LSW(MSD(req
->dma
));
3104 mcp
->mb
[5] = req
->length
;
3106 mcp
->mb
[10] = req
->rsp
->id
;
3107 mcp
->mb
[12] = req
->qos
;
3108 mcp
->mb
[11] = req
->vp_idx
;
3109 mcp
->mb
[13] = req
->rid
;
3111 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3112 QLA_QUE_PAGE
* req
->id
);
3114 mcp
->mb
[4] = req
->id
;
3115 /* que in ptr index */
3117 /* que out ptr index */
3119 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
|
3120 MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3122 mcp
->flags
= MBX_DMA_OUT
;
3125 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3126 if (!(options
& BIT_0
)) {
3127 WRT_REG_DWORD(®
->req_q_in
, 0);
3128 WRT_REG_DWORD(®
->req_q_out
, 0);
3130 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3132 rval
= (int)qla2x00_mailbox_command(vha
, mcp
);
3133 if (rval
!= QLA_SUCCESS
)
3134 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x mb0=%x.\n",
3135 __func__
, vha
->host_no
, rval
, mcp
->mb
[0]));
3140 qla25xx_init_rsp_que(struct scsi_qla_host
*vha
, struct rsp_que
*rsp
,
3144 unsigned long flags
;
3146 mbx_cmd_t
*mcp
= &mc
;
3147 struct device_reg_25xxmq __iomem
*reg
;
3148 struct qla_hw_data
*ha
= vha
->hw
;
3150 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3151 mcp
->mb
[1] = options
;
3152 mcp
->mb
[2] = MSW(LSD(rsp
->dma
));
3153 mcp
->mb
[3] = LSW(LSD(rsp
->dma
));
3154 mcp
->mb
[6] = MSW(MSD(rsp
->dma
));
3155 mcp
->mb
[7] = LSW(MSD(rsp
->dma
));
3156 mcp
->mb
[5] = rsp
->length
;
3157 mcp
->mb
[11] = rsp
->vp_idx
;
3158 mcp
->mb
[14] = rsp
->msix
->vector
;
3159 mcp
->mb
[13] = rsp
->rid
;
3161 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3162 QLA_QUE_PAGE
* rsp
->id
);
3164 mcp
->mb
[4] = rsp
->id
;
3165 /* que in ptr index */
3167 /* que out ptr index */
3169 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
3170 |MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3172 mcp
->flags
= MBX_DMA_OUT
;
3175 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3176 if (!(options
& BIT_0
)) {
3177 WRT_REG_DWORD(®
->rsp_q_out
, 0);
3178 WRT_REG_DWORD(®
->rsp_q_in
, 0);
3181 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3183 rval
= (int)qla2x00_mailbox_command(vha
, mcp
);
3184 if (rval
!= QLA_SUCCESS
)
3185 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x "
3186 "mb0=%x.\n", __func__
,
3187 vha
->host_no
, rval
, mcp
->mb
[0]));