2 * Serial Attached SCSI (SAS) Dump/Debugging routines
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * This file is licensed under GPLv2.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 static const char *sas_hae_str
[] = {
33 static const char *sas_porte_str
[] = {
34 [0] = "PORTE_BYTES_DMAED",
35 [1] = "PORTE_BROADCAST_RCVD",
36 [2] = "PORTE_LINK_RESET_ERR",
37 [3] = "PORTE_TIMER_EVENT",
38 [4] = "PORTE_HARD_RESET",
41 static const char *sas_phye_str
[] = {
42 [0] = "PHYE_LOSS_OF_SIGNAL",
43 [1] = "PHYE_OOB_DONE",
44 [2] = "PHYE_OOB_ERROR",
45 [3] = "PHYE_SPINUP_HOLD",
48 void sas_dprint_porte(int phyid
, enum port_event pe
)
50 SAS_DPRINTK("phy%d: port event: %s\n", phyid
, sas_porte_str
[pe
]);
52 void sas_dprint_phye(int phyid
, enum phy_event pe
)
54 SAS_DPRINTK("phy%d: phy event: %s\n", phyid
, sas_phye_str
[pe
]);
57 void sas_dprint_hae(struct sas_ha_struct
*sas_ha
, enum ha_event he
)
59 SAS_DPRINTK("ha %s: %s event\n", dev_name(sas_ha
->dev
),
63 void sas_dump_port(struct asd_sas_port
*port
)
65 SAS_DPRINTK("port%d: class:0x%x\n", port
->id
, port
->class);
66 SAS_DPRINTK("port%d: sas_addr:%llx\n", port
->id
,
67 SAS_ADDR(port
->sas_addr
));
68 SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port
->id
,
69 SAS_ADDR(port
->attached_sas_addr
));
70 SAS_DPRINTK("port%d: iproto:0x%x\n", port
->id
, port
->iproto
);
71 SAS_DPRINTK("port%d: tproto:0x%x\n", port
->id
, port
->tproto
);
72 SAS_DPRINTK("port%d: oob_mode:0x%x\n", port
->id
, port
->oob_mode
);
73 SAS_DPRINTK("port%d: num_phys:%d\n", port
->id
, port
->num_phys
);
76 #endif /* SAS_DEBUG */