2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/version.h>
10 #include <linux/moduleparam.h>
11 #include <linux/vmalloc.h>
12 #include <linux/smp_lock.h>
13 #include <linux/list.h>
15 #include <scsi/scsi_tcq.h>
16 #include <scsi/scsicam.h>
17 #include <linux/delay.h>
20 qla2x00_vp_stop_timer(scsi_qla_host_t
*vha
)
22 if (vha
->parent
&& vha
->timer_active
) {
23 del_timer_sync(&vha
->timer
);
24 vha
->timer_active
= 0;
29 qla24xx_allocate_vp_id(scsi_qla_host_t
*vha
)
32 scsi_qla_host_t
*ha
= vha
->parent
;
34 /* Find an empty slot and assign an vp_id */
35 mutex_lock(&ha
->vport_lock
);
36 vp_id
= find_first_zero_bit(ha
->vp_idx_map
, ha
->max_npiv_vports
+ 1);
37 if (vp_id
> ha
->max_npiv_vports
) {
38 DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
39 vp_id
, ha
->max_npiv_vports
));
40 mutex_unlock(&ha
->vport_lock
);
44 set_bit(vp_id
, ha
->vp_idx_map
);
46 ha
->cur_vport_count
++;
48 list_add_tail(&vha
->vp_list
, &ha
->vp_list
);
49 mutex_unlock(&ha
->vport_lock
);
54 qla24xx_deallocate_vp_id(scsi_qla_host_t
*vha
)
57 scsi_qla_host_t
*ha
= vha
->parent
;
59 mutex_lock(&ha
->vport_lock
);
62 ha
->cur_vport_count
--;
63 clear_bit(vp_id
, ha
->vp_idx_map
);
64 list_del(&vha
->vp_list
);
65 mutex_unlock(&ha
->vport_lock
);
68 static scsi_qla_host_t
*
69 qla24xx_find_vhost_by_name(scsi_qla_host_t
*ha
, uint8_t *port_name
)
73 /* Locate matching device in database. */
74 list_for_each_entry(vha
, &ha
->vp_list
, vp_list
) {
75 if (!memcmp(port_name
, vha
->port_name
, WWN_SIZE
))
82 * qla2x00_mark_vp_devices_dead
83 * Updates fcport state when device goes offline.
86 * ha = adapter block pointer.
87 * fcport = port structure pointer.
95 qla2x00_mark_vp_devices_dead(scsi_qla_host_t
*vha
)
98 scsi_qla_host_t
*pha
= to_qla_parent(vha
);
100 list_for_each_entry(fcport
, &pha
->fcports
, list
) {
101 if (fcport
->vp_idx
!= vha
->vp_idx
)
104 DEBUG15(printk("scsi(%ld): Marking port dead, "
105 "loop_id=0x%04x :%x\n",
106 vha
->host_no
, fcport
->loop_id
, fcport
->vp_idx
));
108 atomic_set(&fcport
->state
, FCS_DEVICE_DEAD
);
109 qla2x00_mark_device_lost(vha
, fcport
, 0, 0);
114 qla24xx_disable_vp(scsi_qla_host_t
*vha
)
118 ret
= qla24xx_control_vp(vha
, VCE_COMMAND_DISABLE_VPS_LOGO_ALL
);
119 atomic_set(&vha
->loop_state
, LOOP_DOWN
);
120 atomic_set(&vha
->loop_down_timer
, LOOP_DOWN_TIME
);
122 /* Delete all vp's fcports from parent's list */
123 qla2x00_mark_vp_devices_dead(vha
);
124 atomic_set(&vha
->vp_state
, VP_FAILED
);
125 vha
->flags
.management_server_logged_in
= 0;
126 if (ret
== QLA_SUCCESS
) {
127 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_DISABLED
);
129 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_FAILED
);
136 qla24xx_enable_vp(scsi_qla_host_t
*vha
)
139 scsi_qla_host_t
*ha
= vha
->parent
;
141 /* Check if physical ha port is Up */
142 if (atomic_read(&ha
->loop_state
) == LOOP_DOWN
||
143 atomic_read(&ha
->loop_state
) == LOOP_DEAD
) {
144 vha
->vp_err_state
= VP_ERR_PORTDWN
;
145 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_LINKDOWN
);
149 /* Initialize the new vport unless it is a persistent port */
150 mutex_lock(&ha
->vport_lock
);
151 ret
= qla24xx_modify_vp_config(vha
);
152 mutex_unlock(&ha
->vport_lock
);
154 if (ret
!= QLA_SUCCESS
) {
155 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_FAILED
);
159 DEBUG15(qla_printk(KERN_INFO
, ha
,
160 "Virtual port with id: %d - Enabled\n", vha
->vp_idx
));
164 DEBUG15(qla_printk(KERN_INFO
, ha
,
165 "Virtual port with id: %d - Disabled\n", vha
->vp_idx
));
170 qla24xx_configure_vp(scsi_qla_host_t
*vha
)
172 struct fc_vport
*fc_vport
;
175 fc_vport
= vha
->fc_vport
;
177 DEBUG15(printk("scsi(%ld): %s: change request #3 for this host.\n",
178 vha
->host_no
, __func__
));
179 ret
= qla2x00_send_change_request(vha
, 0x3, vha
->vp_idx
);
180 if (ret
!= QLA_SUCCESS
) {
181 DEBUG15(qla_printk(KERN_ERR
, vha
, "Failed to enable receiving"
182 " of RSCN requests: 0x%x\n", ret
));
185 /* Corresponds to SCR enabled */
186 clear_bit(VP_SCR_NEEDED
, &vha
->vp_flags
);
189 vha
->flags
.online
= 1;
190 if (qla24xx_configure_vhba(vha
))
193 atomic_set(&vha
->vp_state
, VP_ACTIVE
);
194 fc_vport_set_state(fc_vport
, FC_VPORT_ACTIVE
);
198 qla2x00_alert_all_vps(scsi_qla_host_t
*ha
, uint16_t *mb
)
200 int i
, vp_idx_matched
;
201 scsi_qla_host_t
*vha
;
206 for_each_mapped_vp_idx(ha
, i
) {
209 list_for_each_entry(vha
, &ha
->vp_list
, vp_list
) {
210 if (i
== vha
->vp_idx
) {
216 if (vp_idx_matched
) {
218 case MBA_LIP_OCCURRED
:
222 case MBA_POINT_TO_POINT
:
223 case MBA_CHG_IN_CONNECTION
:
224 case MBA_PORT_UPDATE
:
225 case MBA_RSCN_UPDATE
:
226 DEBUG15(printk("scsi(%ld)%s: Async_event for"
227 " VP[%d], mb = 0x%x, vha=%p\n",
228 vha
->host_no
, __func__
,i
, *mb
, vha
));
229 qla2x00_async_event(vha
, mb
);
237 qla2x00_vp_abort_isp(scsi_qla_host_t
*vha
)
240 * Physical port will do most of the abort and recovery work. We can
241 * just treat it as a loop down
243 if (atomic_read(&vha
->loop_state
) != LOOP_DOWN
) {
244 atomic_set(&vha
->loop_state
, LOOP_DOWN
);
245 qla2x00_mark_all_devices_lost(vha
, 0);
247 if (!atomic_read(&vha
->loop_down_timer
))
248 atomic_set(&vha
->loop_down_timer
, LOOP_DOWN_TIME
);
251 DEBUG15(printk("scsi(%ld): Scheduling enable of Vport %d...\n",
252 vha
->host_no
, vha
->vp_idx
));
253 qla24xx_enable_vp(vha
);
257 qla2x00_do_dpc_vp(scsi_qla_host_t
*vha
)
259 scsi_qla_host_t
*ha
= vha
->parent
;
261 if (test_and_clear_bit(VP_IDX_ACQUIRED
, &vha
->vp_flags
)) {
262 /* VP acquired. complete port configuration */
263 if (atomic_read(&ha
->loop_state
) == LOOP_READY
) {
264 qla24xx_configure_vp(vha
);
266 set_bit(VP_IDX_ACQUIRED
, &vha
->vp_flags
);
267 set_bit(VP_DPC_NEEDED
, &ha
->dpc_flags
);
273 if (test_and_clear_bit(ISP_ABORT_NEEDED
, &vha
->dpc_flags
))
274 qla2x00_vp_abort_isp(vha
);
276 if (test_and_clear_bit(RESET_MARKER_NEEDED
, &vha
->dpc_flags
) &&
277 (!(test_and_set_bit(RESET_ACTIVE
, &vha
->dpc_flags
)))) {
278 clear_bit(RESET_ACTIVE
, &vha
->dpc_flags
);
281 if (test_and_clear_bit(LOOP_RESYNC_NEEDED
, &vha
->dpc_flags
)) {
282 if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE
, &vha
->dpc_flags
))) {
283 qla2x00_loop_resync(vha
);
284 clear_bit(LOOP_RESYNC_ACTIVE
, &vha
->dpc_flags
);
292 qla2x00_do_dpc_all_vps(scsi_qla_host_t
*ha
)
295 int i
, vp_idx_matched
;
296 scsi_qla_host_t
*vha
;
300 if (list_empty(&ha
->vp_list
))
303 clear_bit(VP_DPC_NEEDED
, &ha
->dpc_flags
);
305 for_each_mapped_vp_idx(ha
, i
) {
308 list_for_each_entry(vha
, &ha
->vp_list
, vp_list
) {
309 if (i
== vha
->vp_idx
) {
316 ret
= qla2x00_do_dpc_vp(vha
);
321 qla24xx_vport_create_req_sanity_check(struct fc_vport
*fc_vport
)
323 scsi_qla_host_t
*ha
= shost_priv(fc_vport
->shost
);
324 scsi_qla_host_t
*vha
;
325 uint8_t port_name
[WWN_SIZE
];
327 if (fc_vport
->roles
!= FC_PORT_ROLE_FCP_INITIATOR
)
328 return VPCERR_UNSUPPORTED
;
330 /* Check up the F/W and H/W support NPIV */
331 if (!ha
->flags
.npiv_supported
)
332 return VPCERR_UNSUPPORTED
;
334 /* Check up whether npiv supported switch presented */
335 if (!(ha
->switch_cap
& FLOGI_MID_SUPPORT
))
336 return VPCERR_NO_FABRIC_SUPP
;
338 /* Check up unique WWPN */
339 u64_to_wwn(fc_vport
->port_name
, port_name
);
340 if (!memcmp(port_name
, ha
->port_name
, WWN_SIZE
))
341 return VPCERR_BAD_WWN
;
342 vha
= qla24xx_find_vhost_by_name(ha
, port_name
);
344 return VPCERR_BAD_WWN
;
346 /* Check up max-npiv-supports */
347 if (ha
->num_vhosts
> ha
->max_npiv_vports
) {
348 DEBUG15(printk("scsi(%ld): num_vhosts %ud is bigger than "
349 "max_npv_vports %ud.\n", ha
->host_no
,
350 ha
->num_vhosts
, ha
->max_npiv_vports
));
351 return VPCERR_UNSUPPORTED
;
357 qla24xx_create_vhost(struct fc_vport
*fc_vport
)
359 scsi_qla_host_t
*ha
= shost_priv(fc_vport
->shost
);
360 scsi_qla_host_t
*vha
;
361 struct Scsi_Host
*host
;
363 host
= scsi_host_alloc(&qla24xx_driver_template
,
364 sizeof(scsi_qla_host_t
));
367 "qla2xxx: scsi_host_alloc() failed for vport\n");
371 vha
= shost_priv(host
);
373 /* clone the parent hba */
374 memcpy(vha
, ha
, sizeof (scsi_qla_host_t
));
376 fc_vport
->dd_data
= vha
;
378 vha
->node_name
= kmalloc(WWN_SIZE
* sizeof(char), GFP_KERNEL
);
380 goto create_vhost_failed_1
;
382 vha
->port_name
= kmalloc(WWN_SIZE
* sizeof(char), GFP_KERNEL
);
384 goto create_vhost_failed_2
;
387 u64_to_wwn(fc_vport
->node_name
, vha
->node_name
);
388 u64_to_wwn(fc_vport
->port_name
, vha
->port_name
);
391 vha
->host_no
= host
->host_no
;
393 vha
->fc_vport
= fc_vport
;
394 vha
->device_flags
= 0;
395 vha
->vp_idx
= qla24xx_allocate_vp_id(vha
);
396 if (vha
->vp_idx
> ha
->max_npiv_vports
) {
397 DEBUG15(printk("scsi(%ld): Couldn't allocate vp_id.\n",
399 goto create_vhost_failed_3
;
401 vha
->mgmt_svr_loop_id
= 10 + vha
->vp_idx
;
403 init_completion(&vha
->mbx_cmd_comp
);
404 complete(&vha
->mbx_cmd_comp
);
405 init_completion(&vha
->mbx_intr_comp
);
407 INIT_LIST_HEAD(&vha
->list
);
408 INIT_LIST_HEAD(&vha
->fcports
);
409 INIT_LIST_HEAD(&vha
->vp_fcports
);
410 INIT_LIST_HEAD(&vha
->work_list
);
413 set_bit(REGISTER_FDMI_NEEDED
, &vha
->dpc_flags
);
414 set_bit(REGISTER_FC4_NEEDED
, &vha
->dpc_flags
);
417 * To fix the issue of processing a parent's RSCN for the vport before
418 * its SCR is complete.
420 set_bit(VP_SCR_NEEDED
, &vha
->vp_flags
);
421 atomic_set(&vha
->loop_state
, LOOP_DOWN
);
422 atomic_set(&vha
->loop_down_timer
, LOOP_DOWN_TIME
);
424 qla2x00_start_timer(vha
, qla2x00_timer
, WATCH_INTERVAL
);
426 host
->can_queue
= vha
->request_q_length
+ 128;
428 host
->cmd_per_lun
= 3;
429 host
->max_cmd_len
= MAX_CMDSZ
;
430 host
->max_channel
= MAX_BUSES
- 1;
431 host
->max_lun
= MAX_LUNS
;
432 host
->unique_id
= host
->host_no
;
433 host
->max_id
= MAX_TARGETS_2200
;
434 host
->transportt
= qla2xxx_transport_vport_template
;
436 DEBUG15(printk("DEBUG: detect vport hba %ld at address = %p\n",
439 vha
->flags
.init_done
= 1;
443 create_vhost_failed_3
:
444 kfree(vha
->port_name
);
446 create_vhost_failed_2
:
447 kfree(vha
->node_name
);
449 create_vhost_failed_1
: