Include <asm/a.out.h> in fs/exec.c only for Alpha.
[linux-2.6/mini2440.git] / arch / ppc / platforms / chestnut.h
blobe00fd9f8bbd039cd189c85e006f4aad9eee7235c
1 /*
2 * Definitions for IBM 750FXGX Eval (Chestnut)
4 * Author: <source@mvista.com>
6 * Based on Artesyn Katana code done by Tim Montgomery <timm@artesyncp.com>
7 * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
8 * Based on code done by Mark A. Greer <mgreer@mvista.com>
10 * <2004> (c) MontaVista Software, Inc. This file is licensed under
11 * the terms of the GNU General Public License version 2. This program
12 * is licensed "as is" without any warranty of any kind, whether express
13 * or implied.
17 * This is the CPU physical memory map (windows must be at least 1MB and start
18 * on a boundary that is a multiple of the window size):
20 * Seems on the IBM 750FXGX Eval board, the MV64460 Registers can be in
21 * only 2 places per switch U17 0x14000000 or 0xf1000000 easily - chose to
22 * implement at 0xf1000000 only at this time
24 * 0xfff00000-0xffffffff - 8 Flash
25 * 0xffe00000-0xffefffff - BOOT SRAM
26 * 0xffd00000-0xffd00004 - CPLD
27 * 0xffc00000-0xffc0000f - UART
28 * 0xffb00000-0xffb07fff - FRAM
29 * 0xff840000-0xffafffff - *** HOLE ***
30 * 0xff800000-0xff83ffff - MV64460 Integrated SRAM
31 * 0xfe000000-0xff8fffff - *** HOLE ***
32 * 0xfc000000-0xfdffffff - 32bit Flash
33 * 0xf1010000-0xfbffffff - *** HOLE ***
34 * 0xf1000000-0xf100ffff - MV64460 Registers
37 #ifndef __PPC_PLATFORMS_CHESTNUT_H__
38 #define __PPC_PLATFORMS_CHESTNUT_H__
40 #define CHESTNUT_BOOT_8BIT_BASE 0xfff00000
41 #define CHESTNUT_BOOT_8BIT_SIZE_ACTUAL (1024*1024)
42 #define CHESTNUT_BOOT_SRAM_BASE 0xffe00000
43 #define CHESTNUT_BOOT_SRAM_SIZE_ACTUAL (1024*1024)
44 #define CHESTNUT_CPLD_BASE 0xffd00000
45 #define CHESTNUT_CPLD_SIZE_ACTUAL 5
46 #define CHESTNUT_CPLD_REG3 (CHESTNUT_CPLD_BASE+3)
47 #define CHESTNUT_UART_BASE 0xffc00000
48 #define CHESTNUT_UART_SIZE_ACTUAL 16
49 #define CHESTNUT_FRAM_BASE 0xffb00000
50 #define CHESTNUT_FRAM_SIZE_ACTUAL (32*1024)
51 #define CHESTNUT_INTERNAL_SRAM_BASE 0xff800000
52 #define CHESTNUT_32BIT_BASE 0xfc000000
53 #define CHESTNUT_32BIT_SIZE (32*1024*1024)
55 #define CHESTNUT_BOOT_8BIT_SIZE max(MV64360_WINDOW_SIZE_MIN, \
56 CHESTNUT_BOOT_8BIT_SIZE_ACTUAL)
57 #define CHESTNUT_BOOT_SRAM_SIZE max(MV64360_WINDOW_SIZE_MIN, \
58 CHESTNUT_BOOT_SRAM_SIZE_ACTUAL)
59 #define CHESTNUT_CPLD_SIZE max(MV64360_WINDOW_SIZE_MIN, \
60 CHESTNUT_CPLD_SIZE_ACTUAL)
61 #define CHESTNUT_UART_SIZE max(MV64360_WINDOW_SIZE_MIN, \
62 CHESTNUT_UART_SIZE_ACTUAL)
63 #define CHESTNUT_FRAM_SIZE max(MV64360_WINDOW_SIZE_MIN, \
64 CHESTNUT_FRAM_SIZE_ACTUAL)
66 #define CHESTNUT_BUS_SPEED 200000000
67 #define CHESTNUT_PIBS_DATABASE 0xf0000 /* from PIBS src code */
69 #define KATANA_ETH0_PHY_ADDR 12
70 #define KATANA_ETH1_PHY_ADDR 11
71 #define KATANA_ETH2_PHY_ADDR 4
73 #define CHESTNUT_ETH_TX_QUEUE_SIZE 800
74 #define CHESTNUT_ETH_RX_QUEUE_SIZE 400
77 * PCI windows
80 #define CHESTNUT_PCI0_MEM_PROC_ADDR 0x80000000
81 #define CHESTNUT_PCI0_MEM_PCI_HI_ADDR 0x00000000
82 #define CHESTNUT_PCI0_MEM_PCI_LO_ADDR 0x80000000
83 #define CHESTNUT_PCI0_MEM_SIZE 0x10000000
84 #define CHESTNUT_PCI0_IO_PROC_ADDR 0xa0000000
85 #define CHESTNUT_PCI0_IO_PCI_ADDR 0x00000000
86 #define CHESTNUT_PCI0_IO_SIZE 0x01000000
89 * Board-specific IRQ info
91 #define CHESTNUT_PCI_SLOT0_IRQ (64 + 31)
92 #define CHESTNUT_PCI_SLOT1_IRQ (64 + 30)
93 #define CHESTNUT_PCI_SLOT2_IRQ (64 + 29)
94 #define CHESTNUT_PCI_SLOT3_IRQ (64 + 28)
96 /* serial port definitions */
97 #define CHESTNUT_UART0_IO_BASE (CHESTNUT_UART_BASE + 8)
98 #define CHESTNUT_UART1_IO_BASE CHESTNUT_UART_BASE
100 #define UART0_INT (64 + 25)
101 #define UART1_INT (64 + 26)
103 #ifdef CONFIG_SERIAL_MANY_PORTS
104 #define RS_TABLE_SIZE 64
105 #else
106 #define RS_TABLE_SIZE 2
107 #endif
109 /* Rate for the 3.6864 Mhz clock for the onboard serial chip */
110 #define BASE_BAUD (3686400 / 16)
112 #ifdef CONFIG_SERIAL_DETECT_IRQ
113 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
114 #else
115 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
116 #endif
118 #define STD_UART_OP(num) \
119 { 0, BASE_BAUD, 0, UART##num##_INT, STD_COM_FLAGS, \
120 iomem_base: (u8 *)CHESTNUT_UART##num##_IO_BASE, \
121 io_type: SERIAL_IO_MEM},
123 #define SERIAL_PORT_DFNS \
124 STD_UART_OP(0) \
125 STD_UART_OP(1)
127 #endif /* __PPC_PLATFORMS_CHESTNUT_H__ */