include/asm-parisc/ropes.h

   1 #ifndef _ASM_PARISC_ROPES_H_
   2 #define _ASM_PARISC_ROPES_H_
   3
   4 #include <asm-parisc/parisc-device.h>
   5
   6 #ifdef CONFIG_64BIT
   7 /* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
   8 #define ZX1_SUPPORT
   9 #endif
  10
  11 #ifdef CONFIG_PROC_FS
  12 /* depends on proc fs support. But costs CPU performance */
  13 #undef SBA_COLLECT_STATS
  14 #endif
  15
  16 /*
  17 ** The number of pdir entries to "free" before issueing
  18 ** a read to PCOM register to flush out PCOM writes.
  19 ** Interacts with allocation granularity (ie 4 or 8 entries
  20 ** allocated and free'd/purged at a time might make this
  21 ** less interesting).
  22 */
  23 #define DELAYED_RESOURCE_CNT    16
  24
  25 #define MAX_IOC         2       /* per Ike. Pluto/Astro only have 1. */
  26 #define ROPES_PER_IOC   8       /* per Ike half or Pluto/Astro */
  27
  28 struct ioc {
  29         void __iomem    *ioc_hpa;       /* I/O MMU base address */
  30         char            *res_map;       /* resource map, bit == pdir entry */
  31         u64             *pdir_base;     /* physical base address */
  32         unsigned long   ibase;          /* pdir IOV Space base - shared w/lba_pci */
  33         unsigned long   imask;          /* pdir IOV Space mask - shared w/lba_pci */
  34 #ifdef ZX1_SUPPORT
  35         unsigned long   iovp_mask;      /* help convert IOVA to IOVP */
  36 #endif
  37         unsigned long   *res_hint;      /* next avail IOVP - circular search */
  38         spinlock_t      res_lock;
  39         unsigned int    res_bitshift;   /* from the LEFT! */
  40         unsigned int    res_size;       /* size of resource map in bytes */
  41 #ifdef SBA_HINT_SUPPORT
  42 /* FIXME : DMA HINTs not used */
  43         unsigned long   hint_mask_pdir; /* bits used for DMA hints */
  44         unsigned int    hint_shift_pdir;
  45 #endif
  46 #if DELAYED_RESOURCE_CNT > 0
  47         int             saved_cnt;
  48         struct sba_dma_pair {
  49                         dma_addr_t      iova;
  50                         size_t          size;
  51         } saved[DELAYED_RESOURCE_CNT];
  52 #endif
  53
  54 #ifdef SBA_COLLECT_STATS
  55 #define SBA_SEARCH_SAMPLE       0x100
  56         unsigned long   avg_search[SBA_SEARCH_SAMPLE];
  57         unsigned long   avg_idx;        /* current index into avg_search */
  58         unsigned long   used_pages;
  59         unsigned long   msingle_calls;
  60         unsigned long   msingle_pages;
  61         unsigned long   msg_calls;
  62         unsigned long   msg_pages;
  63         unsigned long   usingle_calls;
  64         unsigned long   usingle_pages;
  65         unsigned long   usg_calls;
  66         unsigned long   usg_pages;
  67 #endif
  68         /* STUFF We don't need in performance path */
  69         unsigned int    pdir_size;      /* in bytes, determined by IOV Space size */
  70 };
  71
  72 struct sba_device {
  73         struct sba_device       *next;  /* list of SBA's in system */
  74         struct parisc_device    *dev;   /* dev found in bus walk */
  75         const char              *name;
  76         void __iomem            *sba_hpa; /* base address */
  77         spinlock_t              sba_lock;
  78         unsigned int            flags;  /* state/functionality enabled */
  79         unsigned int            hw_rev;  /* HW revision of chip */
  80
  81         struct resource         chip_resv; /* MMIO reserved for chip */
  82         struct resource         iommu_resv; /* MMIO reserved for iommu */
  83
  84         unsigned int            num_ioc;  /* number of on-board IOC's */
  85         struct ioc              ioc[MAX_IOC];
  86 };
  87
  88 #define ASTRO_RUNWAY_PORT       0x582
  89 #define IKE_MERCED_PORT         0x803
  90 #define REO_MERCED_PORT         0x804
  91 #define REOG_MERCED_PORT        0x805
  92 #define PLUTO_MCKINLEY_PORT     0x880
  93
  94 static inline int IS_ASTRO(struct parisc_device *d) {
  95         return d->id.hversion == ASTRO_RUNWAY_PORT;
  96 }
  97
  98 static inline int IS_IKE(struct parisc_device *d) {
  99         return d->id.hversion == IKE_MERCED_PORT;
 100 }
 101
 102 static inline int IS_PLUTO(struct parisc_device *d) {
 103         return d->id.hversion == PLUTO_MCKINLEY_PORT;
 104 }
 105
 106 #define PLUTO_IOVA_BASE (1UL*1024*1024*1024)    /* 1GB */
 107 #define PLUTO_IOVA_SIZE (1UL*1024*1024*1024)    /* 1GB */
 108 #define PLUTO_GART_SIZE (PLUTO_IOVA_SIZE / 2)
 109
 110 #define SBA_PDIR_VALID_BIT      0x8000000000000000ULL
 111
 112 #define SBA_AGPGART_COOKIE      0x0000badbadc0ffeeULL
 113
 114 #define SBA_FUNC_ID     0x0000  /* function id */
 115 #define SBA_FCLASS      0x0008  /* function class, bist, header, rev... */
 116
 117 #define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */
 118
 119 #define ASTRO_IOC_OFFSET        (32 * SBA_FUNC_SIZE)
 120 #define PLUTO_IOC_OFFSET        (1 * SBA_FUNC_SIZE)
 121 /* Ike's IOC's occupy functions 2 and 3 */
 122 #define IKE_IOC_OFFSET(p)       ((p+2) * SBA_FUNC_SIZE)
 123
 124 #define IOC_CTRL          0x8   /* IOC_CTRL offset */
 125 #define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
 126 #define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
 127 #define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
 128 #define IOC_CTRL_RM       (1 << 8) /* Real Mode */
 129 #define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
 130 #define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
 131 #define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */
 132
 133 /*
 134 ** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
 135 ** Firmware programs this stuff. Don't touch it.
 136 */
 137 #define LMMIO_DIRECT0_BASE  0x300
 138 #define LMMIO_DIRECT0_MASK  0x308
 139 #define LMMIO_DIRECT0_ROUTE 0x310
 140
 141 #define LMMIO_DIST_BASE  0x360
 142 #define LMMIO_DIST_MASK  0x368
 143 #define LMMIO_DIST_ROUTE 0x370
 144
 145 #define IOS_DIST_BASE   0x390
 146 #define IOS_DIST_MASK   0x398
 147 #define IOS_DIST_ROUTE  0x3A0
 148
 149 #define IOS_DIRECT_BASE 0x3C0
 150 #define IOS_DIRECT_MASK 0x3C8
 151 #define IOS_DIRECT_ROUTE 0x3D0
 152
 153 /*
 154 ** Offsets into I/O TLB (Function 2 and 3 on Ike)
 155 */
 156 #define ROPE0_CTL       0x200  /* "regbus pci0" */
 157 #define ROPE1_CTL       0x208
 158 #define ROPE2_CTL       0x210
 159 #define ROPE3_CTL       0x218
 160 #define ROPE4_CTL       0x220
 161 #define ROPE5_CTL       0x228
 162 #define ROPE6_CTL       0x230
 163 #define ROPE7_CTL       0x238
 164
 165 #define IOC_ROPE0_CFG   0x500   /* pluto only */
 166 #define   IOC_ROPE_AO     0x10  /* Allow "Relaxed Ordering" */
 167
 168 #define HF_ENABLE       0x40
 169
 170 #define IOC_IBASE       0x300   /* IO TLB */
 171 #define IOC_IMASK       0x308
 172 #define IOC_PCOM        0x310
 173 #define IOC_TCNFG       0x318
 174 #define IOC_PDIR_BASE   0x320
 175
 176 /*
 177 ** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
 178 ** It's safer (avoid memory corruption) to keep DMA page mappings
 179 ** equivalently sized to VM PAGE_SIZE.
 180 **
 181 ** We really can't avoid generating a new mapping for each
 182 ** page since the Virtual Coherence Index has to be generated
 183 ** and updated for each page.
 184 **
 185 ** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
 186 */
 187 #define IOVP_SIZE       PAGE_SIZE
 188 #define IOVP_SHIFT      PAGE_SHIFT
 189 #define IOVP_MASK       PAGE_MASK
 190
 191 #define SBA_PERF_CFG    0x708   /* Performance Counter stuff */
 192 #define SBA_PERF_MASK1  0x718
 193 #define SBA_PERF_MASK2  0x730
 194
 195 /*
 196 ** Offsets into PCI Performance Counters (functions 12 and 13)
 197 ** Controlled by PERF registers in function 2 & 3 respectively.
 198 */
 199 #define SBA_PERF_CNT1   0x200
 200 #define SBA_PERF_CNT2   0x208
 201 #define SBA_PERF_CNT3   0x210
 202
 203 /*
 204 ** lba_device: Per instance Elroy data structure
 205 */
 206 struct lba_device {
 207         struct pci_hba_data     hba;
 208
 209         spinlock_t              lba_lock;
 210         void                    *iosapic_obj;
 211
 212 #ifdef CONFIG_64BIT
 213         void __iomem            *iop_base;      /* PA_VIEW - for IO port accessor funcs */
 214 #endif
 215
 216         int                     flags;          /* state/functionality enabled */
 217         int                     hw_rev;         /* HW revision of chip */
 218 };
 219
 220 #define ELROY_HVERS             0x782
 221 #define MERCURY_HVERS           0x783
 222 #define QUICKSILVER_HVERS       0x784
 223
 224 static inline int IS_ELROY(struct parisc_device *d) {
 225         return (d->id.hversion == ELROY_HVERS);
 226 }
 227
 228 static inline int IS_MERCURY(struct parisc_device *d) {
 229         return (d->id.hversion == MERCURY_HVERS);
 230 }
 231
 232 static inline int IS_QUICKSILVER(struct parisc_device *d) {
 233         return (d->id.hversion == QUICKSILVER_HVERS);
 234 }
 235
 236 static inline int agp_mode_mercury(void __iomem *hpa) {
 237         u64 bus_mode;
 238
 239         bus_mode = readl(hpa + 0x0620);
 240         if (bus_mode & 1)
 241                 return 1;
 242
 243         return 0;
 244 }
 245
 246 /*
 247 ** I/O SAPIC init function
 248 ** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
 249 ** Call setup as part of per instance initialization.
 250 ** (ie *not* init_module() function unless only one is present.)
 251 ** fixup_irq is to initialize PCI IRQ line support and
 252 ** virtualize pcidev->irq value. To be called by pci_fixup_bus().
 253 */
 254 extern void *iosapic_register(unsigned long hpa);
 255 extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
 256
 257 #define LBA_FUNC_ID     0x0000  /* function id */
 258 #define LBA_FCLASS      0x0008  /* function class, bist, header, rev... */
 259 #define LBA_CAPABLE     0x0030  /* capabilities register */
 260
 261 #define LBA_PCI_CFG_ADDR        0x0040  /* poke CFG address here */
 262 #define LBA_PCI_CFG_DATA        0x0048  /* read or write data here */
 263
 264 #define LBA_PMC_MTLT    0x0050  /* Firmware sets this - read only. */
 265 #define LBA_FW_SCRATCH  0x0058  /* Firmware writes the PCI bus number here. */
 266 #define LBA_ERROR_ADDR  0x0070  /* On error, address gets logged here */
 267
 268 #define LBA_ARB_MASK    0x0080  /* bit 0 enable arbitration. PAT/PDC enables */
 269 #define LBA_ARB_PRI     0x0088  /* firmware sets this. */
 270 #define LBA_ARB_MODE    0x0090  /* firmware sets this. */
 271 #define LBA_ARB_MTLT    0x0098  /* firmware sets this. */
 272
 273 #define LBA_MOD_ID      0x0100  /* Module ID. PDC_PAT_CELL reports 4 */
 274
 275 #define LBA_STAT_CTL    0x0108  /* Status & Control */
 276 #define   LBA_BUS_RESET         0x01    /*  Deassert PCI Bus Reset Signal */
 277 #define   CLEAR_ERRLOG          0x10    /*  "Clear Error Log" cmd */
 278 #define   CLEAR_ERRLOG_ENABLE   0x20    /*  "Clear Error Log" Enable */
 279 #define   HF_ENABLE     0x40    /*    enable HF mode (default is -1 mode) */
 280
 281 #define LBA_LMMIO_BASE  0x0200  /* < 4GB I/O address range */
 282 #define LBA_LMMIO_MASK  0x0208
 283
 284 #define LBA_GMMIO_BASE  0x0210  /* > 4GB I/O address range */
 285 #define LBA_GMMIO_MASK  0x0218
 286
 287 #define LBA_WLMMIO_BASE 0x0220  /* All < 4GB ranges under the same *SBA* */
 288 #define LBA_WLMMIO_MASK 0x0228
 289
 290 #define LBA_WGMMIO_BASE 0x0230  /* All > 4GB ranges under the same *SBA* */
 291 #define LBA_WGMMIO_MASK 0x0238
 292
 293 #define LBA_IOS_BASE    0x0240  /* I/O port space for this LBA */
 294 #define LBA_IOS_MASK    0x0248
 295
 296 #define LBA_ELMMIO_BASE 0x0250  /* Extra LMMIO range */
 297 #define LBA_ELMMIO_MASK 0x0258
 298
 299 #define LBA_EIOS_BASE   0x0260  /* Extra I/O port space */
 300 #define LBA_EIOS_MASK   0x0268
 301
 302 #define LBA_GLOBAL_MASK 0x0270  /* Mercury only: Global Address Mask */
 303 #define LBA_DMA_CTL     0x0278  /* firmware sets this */
 304
 305 #define LBA_IBASE       0x0300  /* SBA DMA support */
 306 #define LBA_IMASK       0x0308
 307
 308 /* FIXME: ignore DMA Hint stuff until we can measure performance */
 309 #define LBA_HINT_CFG    0x0310
 310 #define LBA_HINT_BASE   0x0380  /* 14 registers at every 8 bytes. */
 311
 312 #define LBA_BUS_MODE    0x0620
 313
 314 /* ERROR regs are needed for config cycle kluges */
 315 #define LBA_ERROR_CONFIG 0x0680
 316 #define     LBA_SMART_MODE 0x20
 317 #define LBA_ERROR_STATUS 0x0688
 318 #define LBA_ROPE_CTL     0x06A0
 319
 320 #define LBA_IOSAPIC_BASE        0x800 /* Offset of IRQ logic */
 321
 322 #endif /*_ASM_PARISC_ROPES_H_*/