?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Ath5k: fix bintval setup
[linux-2.6/mini2440.git] / include / linux / ide.h
blob87c12ed969548a233a8f9d8e8440ed0bc972a566
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4 * linux/include/linux/ide.h
5 *
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/hdreg.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #ifdef CONFIG_BLK_DEV_IDEACPI
21 #include <acpi/acpi.h>
22 #endif
23 #include <asm/byteorder.h>
24 #include <asm/system.h>
25 #include <asm/io.h>
26 #include <asm/mutex.h>
27
28 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
29 # define SUPPORT_VLB_SYNC 0
30 #else
31 # define SUPPORT_VLB_SYNC 1
32 #endif
33
34 /*
35 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
36 * number.
37 */
38
39 #define IDE_NO_IRQ (-1)
40
41 typedef unsigned char byte; /* used everywhere */
42
43 /*
44 * Probably not wise to fiddle with these
45 */
46 #define ERROR_MAX 8 /* Max read/write errors per sector */
47 #define ERROR_RESET 3 /* Reset controller every 4th retry */
48 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
49
50 /*
51 * state flags
52 */
53
54 #define DMA_PIO_RETRY 1 /* retrying in PIO */
55
56 #define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
57 #define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
58
59 /*
60 * Definitions for accessing IDE controller registers
61 */
62 #define IDE_NR_PORTS (10)
63
64 struct ide_io_ports {
65 unsigned long data_addr;
66
67 union {
68 unsigned long error_addr; /* read: error */
69 unsigned long feature_addr; /* write: feature */
70 };
71
72 unsigned long nsect_addr;
73 unsigned long lbal_addr;
74 unsigned long lbam_addr;
75 unsigned long lbah_addr;
76
77 unsigned long device_addr;
78
79 union {
80 unsigned long status_addr; /*  read: status  */
81 unsigned long command_addr; /* write: command */
82 };
83
84 unsigned long ctl_addr;
85
86 unsigned long irq_addr;
87 };
88
89 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
90 #define BAD_R_STAT (BUSY_STAT | ERR_STAT)
91 #define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
92 #define BAD_STAT (BAD_R_STAT | DRQ_STAT)
93 #define DRIVE_READY (READY_STAT | SEEK_STAT)
94
95 #define BAD_CRC (ABRT_ERR | ICRC_ERR)
96
97 #define SATA_NR_PORTS (3) /* 16 possible ?? */
98
99 #define SATA_STATUS_OFFSET (0)
100 #define SATA_ERROR_OFFSET (1)
101 #define SATA_CONTROL_OFFSET (2)
102
103 /*
104 * Our Physical Region Descriptor (PRD) table should be large enough
105 * to handle the biggest I/O request we are likely to see. Since requests
106 * can have no more than 256 sectors, and since the typical blocksize is
107 * two or more sectors, we could get by with a limit of 128 entries here for
108 * the usual worst case. Most requests seem to include some contiguous blocks,
109 * further reducing the number of table entries required.
110 *
111 * The driver reverts to PIO mode for individual requests that exceed
112 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
113 * 100% of all crazy scenarios here is not necessary.
114 *
115 * As it turns out though, we must allocate a full 4KB page for this,
116 * so the two PRD tables (ide0 & ide1) will each get half of that,
117 * allowing each to have about 256 entries (8 bytes each) from this.
118 */
119 #define PRD_BYTES 8
120 #define PRD_ENTRIES 256
121
122 /*
123 * Some more useful definitions
124 */
125 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
126 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
127 #define SECTOR_SIZE 512
128 #define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
129 #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
130
131 /*
132 * Timeouts for various operations:
133 */
134 #define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
135 #define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
136 #define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
137 #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
138 #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
139 #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
140
141 /*
142 * Op codes for special requests to be handled by ide_special_rq().
143 * Values should be in the range of 0x20 to 0x3f.
144 */
145 #define REQ_DRIVE_RESET 0x20
146
147 /*
148 * Check for an interrupt and acknowledge the interrupt status
149 */
150 struct hwif_s;
151 typedef int (ide_ack_intr_t)(struct hwif_s *);
152
153 /*
154 * hwif_chipset_t is used to keep track of the specific hardware
155 * chipset used by each IDE interface, if known.
156 */
157 enum { ide_unknown, ide_generic, ide_pci,
158 ide_cmd640, ide_dtc2278, ide_ali14xx,
159 ide_qd65xx, ide_umc8672, ide_ht6560b,
160 ide_rz1000, ide_trm290,
161 ide_cmd646, ide_cy82c693, ide_4drives,
162 ide_pmac, ide_acorn,
163 ide_au1xxx, ide_palm3710
164 };
165
166 typedef u8 hwif_chipset_t;
167
168 /*
169 * Structure to hold all information about the location of this port
170 */
171 typedef struct hw_regs_s {
172 union {
173 struct ide_io_ports io_ports;
174 unsigned long io_ports_array[IDE_NR_PORTS];
175 };
176
177 int irq; /* our irq number */
178 ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
179 hwif_chipset_t chipset;
180 struct device *dev, *parent;
181 unsigned long config;
182 } hw_regs_t;
183
184 void ide_init_port_data(struct hwif_s *, unsigned int);
185 void ide_init_port_hw(struct hwif_s *, hw_regs_t *);
186
187 static inline void ide_std_init_ports(hw_regs_t *hw,
188 unsigned long io_addr,
189 unsigned long ctl_addr)
190 {
191 unsigned int i;
192
193 for (i = 0; i <= 7; i++)
194 hw->io_ports_array[i] = io_addr++;
195
196 hw->io_ports.ctl_addr = ctl_addr;
197 }
198
199 /* for IDE PCI controllers in legacy mode, temporary */
200 static inline int __ide_default_irq(unsigned long base)
201 {
202 switch (base) {
203 #ifdef CONFIG_IA64
204 case 0x1f0: return isa_irq_to_vector(14);
205 case 0x170: return isa_irq_to_vector(15);
206 #else
207 case 0x1f0: return 14;
208 case 0x170: return 15;
209 #endif
210 }
211 return 0;
212 }
213
214 #if defined(CONFIG_ARM) || defined(CONFIG_FRV) || defined(CONFIG_M68K) || \
215 defined(CONFIG_MIPS) || defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \
216 || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)
217 #include <asm/ide.h>
218 #else
219 #include <asm-generic/ide_iops.h>
220 #endif
221
222 #define MAX_HWIFS 10
223
224 /* Currently only m68k, apus and m8xx need it */
225 #ifndef IDE_ARCH_ACK_INTR
226 # define ide_ack_intr(hwif) (1)
227 #endif
228
229 /* Currently only Atari needs it */
230 #ifndef IDE_ARCH_LOCK
231 # define ide_release_lock() do {} while (0)
232 # define ide_get_lock(hdlr, data) do {} while (0)
233 #endif /* IDE_ARCH_LOCK */
234
235 /*
236 * Now for the data we need to maintain per-drive: ide_drive_t
237 */
238
239 #define ide_scsi 0x21
240 #define ide_disk 0x20
241 #define ide_optical 0x7
242 #define ide_cdrom 0x5
243 #define ide_tape 0x1
244 #define ide_floppy 0x0
245
246 /*
247 * Special Driver Flags
248 *
249 * set_geometry : respecify drive geometry
250 * recalibrate : seek to cyl 0
251 * set_multmode : set multmode count
252 * set_tune : tune interface for drive
253 * serviced : service command
254 * reserved : unused
255 */
256 typedef union {
257 unsigned all : 8;
258 struct {
259 unsigned set_geometry : 1;
260 unsigned recalibrate : 1;
261 unsigned set_multmode : 1;
262 unsigned set_tune : 1;
263 unsigned serviced : 1;
264 unsigned reserved : 3;
265 } b;
266 } special_t;
267
268 /*
269 * ATA-IDE Select Register, aka Device-Head
270 *
271 * head : always zeros here
272 * unit : drive select number: 0/1
273 * bit5 : always 1
274 * lba : using LBA instead of CHS
275 * bit7 : always 1
276 */
277 typedef union {
278 unsigned all : 8;
279 struct {
280 #if defined(__LITTLE_ENDIAN_BITFIELD)
281 unsigned head : 4;
282 unsigned unit : 1;
283 unsigned bit5 : 1;
284 unsigned lba : 1;
285 unsigned bit7 : 1;
286 #elif defined(__BIG_ENDIAN_BITFIELD)
287 unsigned bit7 : 1;
288 unsigned lba : 1;
289 unsigned bit5 : 1;
290 unsigned unit : 1;
291 unsigned head : 4;
292 #else
293 #error "Please fix <asm/byteorder.h>"
294 #endif
295 } b;
296 } select_t, ata_select_t;
297
298 /*
299 * Status returned from various ide_ functions
300 */
301 typedef enum {
302 ide_stopped, /* no drive operation was started */
303 ide_started, /* a drive operation was started, handler was set */
304 } ide_startstop_t;
305
306 struct ide_driver_s;
307 struct ide_settings_s;
308
309 #ifdef CONFIG_BLK_DEV_IDEACPI
310 struct ide_acpi_drive_link;
311 struct ide_acpi_hwif_link;
312 #endif
313
314 /* ATAPI device flags */
315 enum {
316 IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
317 IDE_AFLAG_MEDIA_CHANGED = (1 << 1),
318
319 /* ide-cd */
320 /* Drive cannot lock the door. */
321 IDE_AFLAG_NO_DOORLOCK = (1 << 2),
322 /* Drive cannot eject the disc. */
323 IDE_AFLAG_NO_EJECT = (1 << 3),
324 /* Drive is a pre ATAPI 1.2 drive. */
325 IDE_AFLAG_PRE_ATAPI12 = (1 << 4),
326 /* TOC addresses are in BCD. */
327 IDE_AFLAG_TOCADDR_AS_BCD = (1 << 5),
328 /* TOC track numbers are in BCD. */
329 IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 6),
330 /*
331 * Drive does not provide data in multiples of SECTOR_SIZE
332 * when more than one interrupt is needed.
333 */
334 IDE_AFLAG_LIMIT_NFRAMES = (1 << 7),
335 /* Seeking in progress. */
336 IDE_AFLAG_SEEKING = (1 << 8),
337 /* Saved TOC information is current. */
338 IDE_AFLAG_TOC_VALID = (1 << 9),
339 /* We think that the drive door is locked. */
340 IDE_AFLAG_DOOR_LOCKED = (1 << 10),
341 /* SET_CD_SPEED command is unsupported. */
342 IDE_AFLAG_NO_SPEED_SELECT = (1 << 11),
343 IDE_AFLAG_VERTOS_300_SSD = (1 << 12),
344 IDE_AFLAG_VERTOS_600_ESD = (1 << 13),
345 IDE_AFLAG_SANYO_3CD = (1 << 14),
346 IDE_AFLAG_FULL_CAPS_PAGE = (1 << 15),
347 IDE_AFLAG_PLAY_AUDIO_OK = (1 << 16),
348 IDE_AFLAG_LE_SPEED_FIELDS = (1 << 17),
349
350 /* ide-floppy */
351 /* Format in progress */
352 IDE_AFLAG_FORMAT_IN_PROGRESS = (1 << 18),
353 /* Avoid commands not supported in Clik drive */
354 IDE_AFLAG_CLIK_DRIVE = (1 << 19),
355 /* Requires BH algorithm for packets */
356 IDE_AFLAG_ZIP_DRIVE = (1 << 20),
357
358 /* ide-tape */
359 IDE_AFLAG_IGNORE_DSC = (1 << 21),
360 /* 0 When the tape position is unknown */
361 IDE_AFLAG_ADDRESS_VALID = (1 << 22),
362 /* Device already opened */
363 IDE_AFLAG_BUSY = (1 << 23),
364 /* Attempt to auto-detect the current user block size */
365 IDE_AFLAG_DETECT_BS = (1 << 24),
366 /* Currently on a filemark */
367 IDE_AFLAG_FILEMARK = (1 << 25),
368 /* 0 = no tape is loaded, so we don't rewind after ejecting */
369 IDE_AFLAG_MEDIUM_PRESENT = (1 << 26)
370 };
371
372 struct ide_drive_s {
373 char name[4]; /* drive name, such as "hda" */
374 char driver_req[10]; /* requests specific driver */
375
376 struct request_queue *queue; /* request queue */
377
378 struct request *rq; /* current request */
379 struct ide_drive_s *next; /* circular list of hwgroup drives */
380 void *driver_data; /* extra driver data */
381 struct hd_driveid *id; /* drive model identification info */
382 #ifdef CONFIG_IDE_PROC_FS
383 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
384 struct ide_settings_s *settings;/* /proc/ide/ drive settings */
385 #endif
386 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
387
388 unsigned long sleep; /* sleep until this time */
389 unsigned long service_start; /* time we started last request */
390 unsigned long service_time; /* service time of last request */
391 unsigned long timeout; /* max time to wait for irq */
392
393 special_t special; /* special action flags */
394 select_t select; /* basic drive/head select reg value */
395
396 u8 keep_settings; /* restore settings after drive reset */
397 u8 using_dma; /* disk is using dma for read/write */
398 u8 retry_pio; /* retrying dma capable host in pio */
399 u8 state; /* retry state */
400 u8 waiting_for_dma; /* dma currently in progress */
401 u8 unmask; /* okay to unmask other irqs */
402 u8 noflush; /* don't attempt flushes */
403 u8 dsc_overlap; /* DSC overlap */
404 u8 nice1; /* give potential excess bandwidth */
405
406 unsigned present : 1; /* drive is physically present */
407 unsigned dead : 1; /* device ejected hint */
408 unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
409 unsigned noprobe : 1; /* from: hdx=noprobe */
410 unsigned removable : 1; /* 1 if need to do check_media_change */
411 unsigned attach : 1; /* needed for removable devices */
412 unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
413 unsigned no_unmask : 1; /* disallow setting unmask bit */
414 unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
415 unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
416 unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
417 unsigned nodma : 1; /* disallow DMA */
418 unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
419 unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
420 unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
421 unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
422 unsigned post_reset : 1;
423 unsigned udma33_warned : 1;
424
425 u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
426 u8 quirk_list; /* considered quirky, set for a specific host */
427 u8 init_speed; /* transfer rate set at boot */
428 u8 current_speed; /* current transfer rate set */
429 u8 desired_speed; /* desired transfer rate set */
430 u8 dn; /* now wide spread use */
431 u8 wcache; /* status of write cache */
432 u8 acoustic; /* acoustic management */
433 u8 media; /* disk, cdrom, tape, floppy, ... */
434 u8 ready_stat; /* min status value for drive ready */
435 u8 mult_count; /* current multiple sector setting */
436 u8 mult_req; /* requested multiple sector setting */
437 u8 tune_req; /* requested drive tuning setting */
438 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
439 u8 bad_wstat; /* used for ignoring WRERR_STAT */
440 u8 nowerr; /* used for ignoring WRERR_STAT */
441 u8 sect0; /* offset of first sector for DM6:DDO */
442 u8 head; /* "real" number of heads */
443 u8 sect; /* "real" sectors per track */
444 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
445 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
446
447 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
448 unsigned int cyl; /* "real" number of cyls */
449 unsigned int drive_data; /* used by set_pio_mode/selectproc */
450 unsigned int failures; /* current failure count */
451 unsigned int max_failures; /* maximum allowed failure count */
452 u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
453
454 u64 capacity64; /* total number of sectors */
455
456 int lun; /* logical unit */
457 int crc_count; /* crc counter to reduce drive speed */
458 #ifdef CONFIG_BLK_DEV_IDEACPI
459 struct ide_acpi_drive_link *acpidata;
460 #endif
461 struct list_head list;
462 struct device gendev;
463 struct completion gendev_rel_comp; /* to deal with device release() */
464
465 /* callback for packet commands */
466 void (*pc_callback)(struct ide_drive_s *);
467
468 unsigned long atapi_flags;
469 };
470
471 typedef struct ide_drive_s ide_drive_t;
472
473 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
474
475 #define IDE_CHIPSET_PCI_MASK \
476 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
477 #define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
478
479 struct ide_task_s;
480 struct ide_port_info;
481
482 struct ide_tp_ops {
483 void (*exec_command)(struct hwif_s *, u8);
484 u8 (*read_status)(struct hwif_s *);
485 u8 (*read_altstatus)(struct hwif_s *);
486 u8 (*read_sff_dma_status)(struct hwif_s *);
487
488 void (*set_irq)(struct hwif_s *, int);
489
490 void (*tf_load)(ide_drive_t *, struct ide_task_s *);
491 void (*tf_read)(ide_drive_t *, struct ide_task_s *);
492
493 void (*input_data)(ide_drive_t *, struct request *, void *,
494 unsigned int);
495 void (*output_data)(ide_drive_t *, struct request *, void *,
496 unsigned int);
497 };
498
499 extern const struct ide_tp_ops default_tp_ops;
500
501 /**
502 * struct ide_port_ops - IDE port operations
503 *
504 * @init_dev: host specific initialization of a device
505 * @set_pio_mode: routine to program host for PIO mode
506 * @set_dma_mode: routine to program host for DMA mode
507 * @selectproc: tweaks hardware to select drive
508 * @reset_poll: chipset polling based on hba specifics
509 * @pre_reset: chipset specific changes to default for device-hba resets
510 * @resetproc: routine to reset controller after a disk reset
511 * @maskproc: special host masking for drive selection
512 * @quirkproc: check host's drive quirk list
513 *
514 * @mdma_filter: filter MDMA modes
515 * @udma_filter: filter UDMA modes
516 *
517 * @cable_detect: detect cable type
518 */
519 struct ide_port_ops {
520 void (*init_dev)(ide_drive_t *);
521 void (*set_pio_mode)(ide_drive_t *, const u8);
522 void (*set_dma_mode)(ide_drive_t *, const u8);
523 void (*selectproc)(ide_drive_t *);
524 int (*reset_poll)(ide_drive_t *);
525 void (*pre_reset)(ide_drive_t *);
526 void (*resetproc)(ide_drive_t *);
527 void (*maskproc)(ide_drive_t *, int);
528 void (*quirkproc)(ide_drive_t *);
529
530 u8 (*mdma_filter)(ide_drive_t *);
531 u8 (*udma_filter)(ide_drive_t *);
532
533 u8 (*cable_detect)(struct hwif_s *);
534 };
535
536 struct ide_dma_ops {
537 void (*dma_host_set)(struct ide_drive_s *, int);
538 int (*dma_setup)(struct ide_drive_s *);
539 void (*dma_exec_cmd)(struct ide_drive_s *, u8);
540 void (*dma_start)(struct ide_drive_s *);
541 int (*dma_end)(struct ide_drive_s *);
542 int (*dma_test_irq)(struct ide_drive_s *);
543 void (*dma_lost_irq)(struct ide_drive_s *);
544 void (*dma_timeout)(struct ide_drive_s *);
545 };
546
547 struct ide_host;
548
549 typedef struct hwif_s {
550 struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
551 struct hwif_s *mate; /* other hwif from same PCI chip */
552 struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
553 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
554
555 struct ide_host *host;
556
557 char name[6]; /* name of interface, eg. "ide0" */
558
559 struct ide_io_ports io_ports;
560
561 unsigned long sata_scr[SATA_NR_PORTS];
562
563 ide_drive_t drives[MAX_DRIVES]; /* drive info */
564
565 u8 major; /* our major number */
566 u8 index; /* 0 for ide0; 1 for ide1; ... */
567 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
568 u8 bus_state; /* power state of the IDE bus */
569
570 u32 host_flags;
571
572 u8 pio_mask;
573
574 u8 ultra_mask;
575 u8 mwdma_mask;
576 u8 swdma_mask;
577
578 u8 cbl; /* cable type */
579
580 hwif_chipset_t chipset; /* sub-module for tuning.. */
581
582 struct device *dev;
583
584 ide_ack_intr_t *ack_intr;
585
586 void (*rw_disk)(ide_drive_t *, struct request *);
587
588 const struct ide_tp_ops *tp_ops;
589 const struct ide_port_ops *port_ops;
590 const struct ide_dma_ops *dma_ops;
591
592 void (*ide_dma_clear_irq)(ide_drive_t *drive);
593
594 /* dma physical region descriptor table (cpu view) */
595 unsigned int *dmatable_cpu;
596 /* dma physical region descriptor table (dma view) */
597 dma_addr_t dmatable_dma;
598 /* Scatter-gather list used to build the above */
599 struct scatterlist *sg_table;
600 int sg_max_nents; /* Maximum number of entries in it */
601 int sg_nents; /* Current number of entries in it */
602 int sg_dma_direction; /* dma transfer direction */
603
604 /* data phase of the active command (currently only valid for PIO/DMA) */
605 int data_phase;
606
607 unsigned int nsect;
608 unsigned int nleft;
609 struct scatterlist *cursg;
610 unsigned int cursg_ofs;
611
612 int rqsize; /* max sectors per request */
613 int irq; /* our irq number */
614
615 unsigned long dma_base; /* base addr for dma ports */
616
617 unsigned long config_data; /* for use by chipset-specific code */
618 unsigned long select_data; /* for use by chipset-specific code */
619
620 unsigned long extra_base; /* extra addr for dma ports */
621 unsigned extra_ports; /* number of extra dma ports */
622
623 unsigned present : 1; /* this interface exists */
624 unsigned serialized : 1; /* serialized all channel operation */
625 unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
626 unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
627
628 struct device gendev;
629 struct device *portdev;
630
631 struct completion gendev_rel_comp; /* To deal with device release() */
632
633 void *hwif_data; /* extra hwif data */
634
635 unsigned dma;
636
637 #ifdef CONFIG_BLK_DEV_IDEACPI
638 struct ide_acpi_hwif_link *acpidata;
639 #endif
640 } ____cacheline_internodealigned_in_smp ide_hwif_t;
641
642 struct ide_host {
643 ide_hwif_t *ports[MAX_HWIFS];
644 unsigned int n_ports;
645 struct device *dev[2];
646 unsigned long host_flags;
647 void *host_priv;
648 };
649
650 /*
651 * internal ide interrupt handler type
652 */
653 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
654 typedef int (ide_expiry_t)(ide_drive_t *);
655
656 /* used by ide-cd, ide-floppy, etc. */
657 typedef void (xfer_func_t)(ide_drive_t *, struct request *rq, void *, unsigned);
658
659 typedef struct hwgroup_s {
660 /* irq handler, if active */
661 ide_startstop_t (*handler)(ide_drive_t *);
662
663 /* BOOL: protects all fields below */
664 volatile int busy;
665 /* BOOL: wake us up on timer expiry */
666 unsigned int sleeping : 1;
667 /* BOOL: polling active & poll_timeout field valid */
668 unsigned int polling : 1;
669
670 /* current drive */
671 ide_drive_t *drive;
672 /* ptr to current hwif in linked-list */
673 ide_hwif_t *hwif;
674
675 /* current request */
676 struct request *rq;
677
678 /* failsafe timer */
679 struct timer_list timer;
680 /* timeout value during long polls */
681 unsigned long poll_timeout;
682 /* queried upon timeouts */
683 int (*expiry)(ide_drive_t *);
684
685 int req_gen;
686 int req_gen_timer;
687 } ide_hwgroup_t;
688
689 typedef struct ide_driver_s ide_driver_t;
690
691 extern struct mutex ide_setting_mtx;
692
693 int set_io_32bit(ide_drive_t *, int);
694 int set_pio_mode(ide_drive_t *, int);
695 int set_using_dma(ide_drive_t *, int);
696
697 /* ATAPI packet command flags */
698 enum {
699 /* set when an error is considered normal - no retry (ide-tape) */
700 PC_FLAG_ABORT = (1 << 0),
701 PC_FLAG_SUPPRESS_ERROR = (1 << 1),
702 PC_FLAG_WAIT_FOR_DSC = (1 << 2),
703 PC_FLAG_DMA_OK = (1 << 3),
704 PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
705 PC_FLAG_DMA_ERROR = (1 << 5),
706 PC_FLAG_WRITING = (1 << 6),
707 /* command timed out */
708 PC_FLAG_TIMEDOUT = (1 << 7),
709 };
710
711 struct ide_atapi_pc {
712 /* actual packet bytes */
713 u8 c[12];
714 /* incremented on each retry */
715 int retries;
716 int error;
717
718 /* bytes to transfer */
719 int req_xfer;
720 /* bytes actually transferred */
721 int xferred;
722
723 /* data buffer */
724 u8 *buf;
725 /* current buffer position */
726 u8 *cur_pos;
727 int buf_size;
728 /* missing/available data on the current buffer */
729 int b_count;
730
731 /* the corresponding request */
732 struct request *rq;
733
734 unsigned long flags;
735
736 /*
737 * those are more or less driver-specific and some of them are subject
738 * to change/removal later.
739 */
740 u8 pc_buf[256];
741
742 /* idetape only */
743 struct idetape_bh *bh;
744 char *b_data;
745
746 /* idescsi only for now */
747 struct scatterlist *sg;
748 unsigned int sg_cnt;
749
750 struct scsi_cmnd *scsi_cmd;
751 void (*done) (struct scsi_cmnd *);
752
753 unsigned long timeout;
754 };
755
756 #ifdef CONFIG_IDE_PROC_FS
757 /*
758 * configurable drive settings
759 */
760
761 #define TYPE_INT 0
762 #define TYPE_BYTE 1
763 #define TYPE_SHORT 2
764
765 #define SETTING_READ (1 << 0)
766 #define SETTING_WRITE (1 << 1)
767 #define SETTING_RW (SETTING_READ | SETTING_WRITE)
768
769 typedef int (ide_procset_t)(ide_drive_t *, int);
770 typedef struct ide_settings_s {
771 char *name;
772 int rw;
773 int data_type;
774 int min;
775 int max;
776 int mul_factor;
777 int div_factor;
778 void *data;
779 ide_procset_t *set;
780 int auto_remove;
781 struct ide_settings_s *next;
782 } ide_settings_t;
783
784 int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
785
786 /*
787 * /proc/ide interface
788 */
789 typedef struct {
790 const char *name;
791 mode_t mode;
792 read_proc_t *read_proc;
793 write_proc_t *write_proc;
794 } ide_proc_entry_t;
795
796 void proc_ide_create(void);
797 void proc_ide_destroy(void);
798 void ide_proc_register_port(ide_hwif_t *);
799 void ide_proc_port_register_devices(ide_hwif_t *);
800 void ide_proc_unregister_device(ide_drive_t *);
801 void ide_proc_unregister_port(ide_hwif_t *);
802 void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
803 void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
804
805 void ide_add_generic_settings(ide_drive_t *);
806
807 read_proc_t proc_ide_read_capacity;
808 read_proc_t proc_ide_read_geometry;
809
810 /*
811 * Standard exit stuff:
812 */
813 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
814 { \
815 len -= off; \
816 if (len < count) { \
817 *eof = 1; \
818 if (len <= 0) \
819 return 0; \
820 } else \
821 len = count; \
822 *start = page + off; \
823 return len; \
824 }
825 #else
826 static inline void proc_ide_create(void) { ; }
827 static inline void proc_ide_destroy(void) { ; }
828 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
829 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
830 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
831 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
832 static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
833 static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
834 static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
835 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
836 #endif
837
838 /*
839 * Power Management step value (rq->pm->pm_step).
840 *
841 * The step value starts at 0 (ide_pm_state_start_suspend) for a
842 * suspend operation or 1000 (ide_pm_state_start_resume) for a
843 * resume operation.
844 *
845 * For each step, the core calls the subdriver start_power_step() first.
846 * This can return:
847 * - ide_stopped : In this case, the core calls us back again unless
848 * step have been set to ide_power_state_completed.
849 * - ide_started : In this case, the channel is left busy until an
850 * async event (interrupt) occurs.
851 * Typically, start_power_step() will issue a taskfile request with
852 * do_rw_taskfile().
853 *
854 * Upon reception of the interrupt, the core will call complete_power_step()
855 * with the error code if any. This routine should update the step value
856 * and return. It should not start a new request. The core will call
857 * start_power_step for the new step value, unless step have been set to
858 * ide_power_state_completed.
859 *
860 * Subdrivers are expected to define their own additional power
861 * steps from 1..999 for suspend and from 1001..1999 for resume,
862 * other values are reserved for future use.
863 */
864
865 enum {
866 ide_pm_state_completed = -1,
867 ide_pm_state_start_suspend = 0,
868 ide_pm_state_start_resume = 1000,
869 };
870
871 /*
872 * Subdrivers support.
873 *
874 * The gendriver.owner field should be set to the module owner of this driver.
875 * The gendriver.name field should be set to the name of this driver
876 */
877 struct ide_driver_s {
878 const char *version;
879 u8 media;
880 unsigned supports_dsc_overlap : 1;
881 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
882 int (*end_request)(ide_drive_t *, int, int);
883 ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
884 struct device_driver gen_driver;
885 int (*probe)(ide_drive_t *);
886 void (*remove)(ide_drive_t *);
887 void (*resume)(ide_drive_t *);
888 void (*shutdown)(ide_drive_t *);
889 #ifdef CONFIG_IDE_PROC_FS
890 ide_proc_entry_t *proc;
891 #endif
892 };
893
894 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
895
896 int ide_device_get(ide_drive_t *);
897 void ide_device_put(ide_drive_t *);
898
899 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
900
901 extern int ide_vlb_clk;
902 extern int ide_pci_clk;
903
904 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
905 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
906 int uptodate, int nr_sectors);
907
908 extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
909
910 void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
911 ide_expiry_t *);
912
913 void ide_execute_pkt_cmd(ide_drive_t *);
914
915 void ide_pad_transfer(ide_drive_t *, int, int);
916
917 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
918
919 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
920
921 extern void ide_fix_driveid(struct hd_driveid *);
922
923 extern void ide_fixstring(u8 *, const int, const int);
924
925 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
926
927 extern ide_startstop_t ide_do_reset (ide_drive_t *);
928
929 extern void ide_do_drive_cmd(ide_drive_t *, struct request *);
930
931 extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
932
933 enum {
934 IDE_TFLAG_LBA48 = (1 << 0),
935 IDE_TFLAG_FLAGGED = (1 << 2),
936 IDE_TFLAG_OUT_DATA = (1 << 3),
937 IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
938 IDE_TFLAG_OUT_HOB_NSECT = (1 << 5),
939 IDE_TFLAG_OUT_HOB_LBAL = (1 << 6),
940 IDE_TFLAG_OUT_HOB_LBAM = (1 << 7),
941 IDE_TFLAG_OUT_HOB_LBAH = (1 << 8),
942 IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE |
943 IDE_TFLAG_OUT_HOB_NSECT |
944 IDE_TFLAG_OUT_HOB_LBAL |
945 IDE_TFLAG_OUT_HOB_LBAM |
946 IDE_TFLAG_OUT_HOB_LBAH,
947 IDE_TFLAG_OUT_FEATURE = (1 << 9),
948 IDE_TFLAG_OUT_NSECT = (1 << 10),
949 IDE_TFLAG_OUT_LBAL = (1 << 11),
950 IDE_TFLAG_OUT_LBAM = (1 << 12),
951 IDE_TFLAG_OUT_LBAH = (1 << 13),
952 IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE |
953 IDE_TFLAG_OUT_NSECT |
954 IDE_TFLAG_OUT_LBAL |
955 IDE_TFLAG_OUT_LBAM |
956 IDE_TFLAG_OUT_LBAH,
957 IDE_TFLAG_OUT_DEVICE = (1 << 14),
958 IDE_TFLAG_WRITE = (1 << 15),
959 IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
960 IDE_TFLAG_IN_DATA = (1 << 17),
961 IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
962 IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19),
963 IDE_TFLAG_IN_HOB_FEATURE = (1 << 20),
964 IDE_TFLAG_IN_HOB_NSECT = (1 << 21),
965 IDE_TFLAG_IN_HOB_LBAL = (1 << 22),
966 IDE_TFLAG_IN_HOB_LBAM = (1 << 23),
967 IDE_TFLAG_IN_HOB_LBAH = (1 << 24),
968 IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
969 IDE_TFLAG_IN_HOB_LBAM |
970 IDE_TFLAG_IN_HOB_LBAH,
971 IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
972 IDE_TFLAG_IN_HOB_NSECT |
973 IDE_TFLAG_IN_HOB_LBA,
974 IDE_TFLAG_IN_FEATURE = (1 << 1),
975 IDE_TFLAG_IN_NSECT = (1 << 25),
976 IDE_TFLAG_IN_LBAL = (1 << 26),
977 IDE_TFLAG_IN_LBAM = (1 << 27),
978 IDE_TFLAG_IN_LBAH = (1 << 28),
979 IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL |
980 IDE_TFLAG_IN_LBAM |
981 IDE_TFLAG_IN_LBAH,
982 IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT |
983 IDE_TFLAG_IN_LBA,
984 IDE_TFLAG_IN_DEVICE = (1 << 29),
985 IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB |
986 IDE_TFLAG_IN_HOB,
987 IDE_TFLAG_TF = IDE_TFLAG_OUT_TF |
988 IDE_TFLAG_IN_TF,
989 IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE |
990 IDE_TFLAG_IN_DEVICE,
991 /* force 16-bit I/O operations */
992 IDE_TFLAG_IO_16BIT = (1 << 30),
993 /* ide_task_t was allocated using kmalloc() */
994 IDE_TFLAG_DYN = (1 << 31),
995 };
996
997 struct ide_taskfile {
998 u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
999
1000 u8 hob_feature; /* 1-5: additional data to support LBA48 */
1001 u8 hob_nsect;
1002 u8 hob_lbal;
1003 u8 hob_lbam;
1004 u8 hob_lbah;
1005
1006 u8 data; /* 6: low data byte (for TASKFILE IOCTL) */
1007
1008 union { /*  7: */
1009 u8 error; /* read: error */
1010 u8 feature; /* write: feature */
1011 };
1012
1013 u8 nsect; /* 8: number of sectors */
1014 u8 lbal; /* 9: LBA low */
1015 u8 lbam; /* 10: LBA mid */
1016 u8 lbah; /* 11: LBA high */
1017
1018 u8 device; /* 12: device select */
1019
1020 union { /* 13: */
1021 u8 status; /*  read: status  */
1022 u8 command; /* write: command */
1023 };
1024 };
1025
1026 typedef struct ide_task_s {
1027 union {
1028 struct ide_taskfile tf;
1029 u8 tf_array[14];
1030 };
1031 u32 tf_flags;
1032 int data_phase;
1033 struct request *rq; /* copy of request */
1034 void *special; /* valid_t generally */
1035 } ide_task_t;
1036
1037 void ide_tf_dump(const char *, struct ide_taskfile *);
1038
1039 void ide_exec_command(ide_hwif_t *, u8);
1040 u8 ide_read_status(ide_hwif_t *);
1041 u8 ide_read_altstatus(ide_hwif_t *);
1042 u8 ide_read_sff_dma_status(ide_hwif_t *);
1043
1044 void ide_set_irq(ide_hwif_t *, int);
1045
1046 void ide_tf_load(ide_drive_t *, ide_task_t *);
1047 void ide_tf_read(ide_drive_t *, ide_task_t *);
1048
1049 void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
1050 void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
1051
1052 extern void SELECT_DRIVE(ide_drive_t *);
1053 void SELECT_MASK(ide_drive_t *, int);
1054
1055 u8 ide_read_error(ide_drive_t *);
1056 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1057
1058 extern int drive_is_ready(ide_drive_t *);
1059
1060 void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
1061
1062 ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
1063 ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
1064 void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
1065 void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
1066 void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
1067 int));
1068 ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
1069 ide_handler_t *, unsigned int, ide_expiry_t *);
1070 ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
1071 ide_handler_t *, unsigned int, ide_expiry_t *);
1072
1073 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1074
1075 void task_end_request(ide_drive_t *, struct request *, u8);
1076
1077 int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
1078 int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
1079
1080 int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1081 int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
1082 int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
1083
1084 extern int ide_driveid_update(ide_drive_t *);
1085 extern int ide_config_drive_speed(ide_drive_t *, u8);
1086 extern u8 eighty_ninty_three (ide_drive_t *);
1087 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1088
1089 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1090
1091 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1092
1093 extern int ide_spin_wait_hwgroup(ide_drive_t *);
1094 extern void ide_timer_expiry(unsigned long);
1095 extern irqreturn_t ide_intr(int irq, void *dev_id);
1096 extern void do_ide_request(struct request_queue *);
1097
1098 void ide_init_disk(struct gendisk *, ide_drive_t *);
1099
1100 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1101 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1102 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1103 #else
1104 #define ide_pci_register_driver(d) pci_register_driver(d)
1105 #endif
1106
1107 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
1108 hw_regs_t *, hw_regs_t **);
1109 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1110
1111 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1112 int ide_pci_set_master(struct pci_dev *, const char *);
1113 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1114 extern const struct ide_dma_ops sff_dma_ops;
1115 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1116 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1117 #else
1118 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1119 const struct ide_port_info *d)
1120 {
1121 return -EINVAL;
1122 }
1123 #endif
1124
1125 typedef struct ide_pci_enablebit_s {
1126 u8 reg; /* byte pci reg holding the enable-bit */
1127 u8 mask; /* mask to isolate the enable-bit */
1128 u8 val; /* value of masked reg when "enabled" */
1129 } ide_pci_enablebit_t;
1130
1131 enum {
1132 /* Uses ISA control ports not PCI ones. */
1133 IDE_HFLAG_ISA_PORTS = (1 << 0),
1134 /* single port device */
1135 IDE_HFLAG_SINGLE = (1 << 1),
1136 /* don't use legacy PIO blacklist */
1137 IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
1138 /* set for the second port of QD65xx */
1139 IDE_HFLAG_QD_2ND_PORT = (1 << 3),
1140 /* use PIO8/9 for prefetch off/on */
1141 IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
1142 /* use PIO6/7 for fast-devsel off/on */
1143 IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
1144 /* use 100-102 and 200-202 PIO values to set DMA modes */
1145 IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
1146 /*
1147 * keep DMA setting when programming PIO mode, may be used only
1148 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1149 */
1150 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1151 /* program host for the transfer mode after programming device */
1152 IDE_HFLAG_POST_SET_MODE = (1 << 8),
1153 /* don't program host/device for the transfer mode ("smart" hosts) */
1154 IDE_HFLAG_NO_SET_MODE = (1 << 9),
1155 /* trust BIOS for programming chipset/device for DMA */
1156 IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
1157 /* host is CS5510/CS5520 */
1158 IDE_HFLAG_CS5520 = (1 << 11),
1159 /* ATAPI DMA is unsupported */
1160 IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
1161 /* set if host is a "non-bootable" controller */
1162 IDE_HFLAG_NON_BOOTABLE = (1 << 13),
1163 /* host doesn't support DMA */
1164 IDE_HFLAG_NO_DMA = (1 << 14),
1165 /* check if host is PCI IDE device before allowing DMA */
1166 IDE_HFLAG_NO_AUTODMA = (1 << 15),
1167 /* host uses MMIO */
1168 IDE_HFLAG_MMIO = (1 << 16),
1169 /* no LBA48 */
1170 IDE_HFLAG_NO_LBA48 = (1 << 17),
1171 /* no LBA48 DMA */
1172 IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
1173 /* data FIFO is cleared by an error */
1174 IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
1175 /* serialize ports */
1176 IDE_HFLAG_SERIALIZE = (1 << 20),
1177 /* use legacy IRQs */
1178 IDE_HFLAG_LEGACY_IRQS = (1 << 21),
1179 /* force use of legacy IRQs */
1180 IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
1181 /* limit LBA48 requests to 256 sectors */
1182 IDE_HFLAG_RQSIZE_256 = (1 << 23),
1183 /* use 32-bit I/O ops */
1184 IDE_HFLAG_IO_32BIT = (1 << 24),
1185 /* unmask IRQs */
1186 IDE_HFLAG_UNMASK_IRQS = (1 << 25),
1187 /* serialize ports if DMA is possible (for sl82c105) */
1188 IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
1189 /* force host out of "simplex" mode */
1190 IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
1191 /* DSC overlap is unsupported */
1192 IDE_HFLAG_NO_DSC = (1 << 29),
1193 /* never use 32-bit I/O ops */
1194 IDE_HFLAG_NO_IO_32BIT = (1 << 30),
1195 /* never unmask IRQs */
1196 IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
1197 };
1198
1199 #ifdef CONFIG_BLK_DEV_OFFBOARD
1200 # define IDE_HFLAG_OFF_BOARD 0
1201 #else
1202 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1203 #endif
1204
1205 struct ide_port_info {
1206 char *name;
1207 unsigned int (*init_chipset)(struct pci_dev *);
1208 void (*init_iops)(ide_hwif_t *);
1209 void (*init_hwif)(ide_hwif_t *);
1210 int (*init_dma)(ide_hwif_t *,
1211 const struct ide_port_info *);
1212
1213 const struct ide_tp_ops *tp_ops;
1214 const struct ide_port_ops *port_ops;
1215 const struct ide_dma_ops *dma_ops;
1216
1217 ide_pci_enablebit_t enablebits[2];
1218 hwif_chipset_t chipset;
1219 u32 host_flags;
1220 u8 pio_mask;
1221 u8 swdma_mask;
1222 u8 mwdma_mask;
1223 u8 udma_mask;
1224 };
1225
1226 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1227 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1228 const struct ide_port_info *, void *);
1229 void ide_pci_remove(struct pci_dev *);
1230
1231 void ide_map_sg(ide_drive_t *, struct request *);
1232 void ide_init_sg_cmd(ide_drive_t *, struct request *);
1233
1234 #define BAD_DMA_DRIVE 0
1235 #define GOOD_DMA_DRIVE 1
1236
1237 struct drive_list_entry {
1238 const char *id_model;
1239 const char *id_firmware;
1240 };
1241
1242 int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
1243
1244 #ifdef CONFIG_BLK_DEV_IDEDMA
1245 int __ide_dma_bad_drive(ide_drive_t *);
1246 int ide_id_dma_bug(ide_drive_t *);
1247
1248 u8 ide_find_dma_mode(ide_drive_t *, u8);
1249
1250 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1251 {
1252 return ide_find_dma_mode(drive, XFER_UDMA_6);
1253 }
1254
1255 void ide_dma_off_quietly(ide_drive_t *);
1256 void ide_dma_off(ide_drive_t *);
1257 void ide_dma_on(ide_drive_t *);
1258 int ide_set_dma(ide_drive_t *);
1259 void ide_check_dma_crc(ide_drive_t *);
1260 ide_startstop_t ide_dma_intr(ide_drive_t *);
1261
1262 int ide_build_sglist(ide_drive_t *, struct request *);
1263 void ide_destroy_dmatable(ide_drive_t *);
1264
1265 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1266 extern int ide_build_dmatable(ide_drive_t *, struct request *);
1267 int ide_allocate_dma_engine(ide_hwif_t *);
1268 void ide_release_dma_engine(ide_hwif_t *);
1269
1270 void ide_dma_host_set(ide_drive_t *, int);
1271 extern int ide_dma_setup(ide_drive_t *);
1272 void ide_dma_exec_cmd(ide_drive_t *, u8);
1273 extern void ide_dma_start(ide_drive_t *);
1274 extern int __ide_dma_end(ide_drive_t *);
1275 int ide_dma_test_irq(ide_drive_t *);
1276 extern void ide_dma_lost_irq(ide_drive_t *);
1277 extern void ide_dma_timeout(ide_drive_t *);
1278 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1279
1280 #else
1281 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1282 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1283 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1284 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1285 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1286 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1287 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1288 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1289 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1290 #endif /* CONFIG_BLK_DEV_IDEDMA */
1291
1292 #ifndef CONFIG_BLK_DEV_IDEDMA_SFF
1293 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1294 #endif
1295
1296 #ifdef CONFIG_BLK_DEV_IDEACPI
1297 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1298 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1299 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1300 extern void ide_acpi_init(ide_hwif_t *hwif);
1301 void ide_acpi_port_init_devices(ide_hwif_t *);
1302 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1303 #else
1304 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1305 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1306 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1307 static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
1308 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1309 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1310 #endif
1311
1312 void ide_remove_port_from_hwgroup(ide_hwif_t *);
1313 void ide_unregister(ide_hwif_t *);
1314
1315 void ide_register_region(struct gendisk *);
1316 void ide_unregister_region(struct gendisk *);
1317
1318 void ide_undecoded_slave(ide_drive_t *);
1319
1320 void ide_port_apply_params(ide_hwif_t *);
1321
1322 struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
1323 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
1324 void ide_host_free(struct ide_host *);
1325 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1326 hw_regs_t **);
1327 int ide_host_add(const struct ide_port_info *, hw_regs_t **,
1328 struct ide_host **);
1329 void ide_host_remove(struct ide_host *);
1330 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1331 void ide_port_unregister_devices(ide_hwif_t *);
1332 void ide_port_scan(ide_hwif_t *);
1333
1334 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1335 {
1336 return hwif->hwif_data;
1337 }
1338
1339 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1340 {
1341 hwif->hwif_data = data;
1342 }
1343
1344 const char *ide_xfer_verbose(u8 mode);
1345 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1346 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1347
1348 static inline int ide_dev_has_iordy(struct hd_driveid *id)
1349 {
1350 return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
1351 }
1352
1353 static inline int ide_dev_is_sata(struct hd_driveid *id)
1354 {
1355 /*
1356 * See if word 93 is 0 AND drive is at least ATA-5 compatible
1357 * verifying that word 80 by casting it to a signed type --
1358 * this trick allows us to filter out the reserved values of
1359 * 0x0000 and 0xffff along with the earlier ATA revisions...
1360 */
1361 if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020)
1362 return 1;
1363 return 0;
1364 }
1365
1366 u64 ide_get_lba_addr(struct ide_taskfile *, int);
1367 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1368
1369 struct ide_timing {
1370 u8 mode;
1371 u8 setup; /* t1 */
1372 u16 act8b; /* t2 for 8-bit io */
1373 u16 rec8b; /* t2i for 8-bit io */
1374 u16 cyc8b; /* t0 for 8-bit io */
1375 u16 active; /* t2 or tD */
1376 u16 recover; /* t2i or tK */
1377 u16 cycle; /* t0 */
1378 u16 udma; /* t2CYCTYP/2 */
1379 };
1380
1381 enum {
1382 IDE_TIMING_SETUP = (1 << 0),
1383 IDE_TIMING_ACT8B = (1 << 1),
1384 IDE_TIMING_REC8B = (1 << 2),
1385 IDE_TIMING_CYC8B = (1 << 3),
1386 IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1387 IDE_TIMING_CYC8B,
1388 IDE_TIMING_ACTIVE = (1 << 4),
1389 IDE_TIMING_RECOVER = (1 << 5),
1390 IDE_TIMING_CYCLE = (1 << 6),
1391 IDE_TIMING_UDMA = (1 << 7),
1392 IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1393 IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1394 IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1395 };
1396
1397 struct ide_timing *ide_timing_find_mode(u8);
1398 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1399 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1400 struct ide_timing *, unsigned int);
1401 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1402
1403 int ide_scan_pio_blacklist(char *);
1404
1405 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1406
1407 int ide_set_pio_mode(ide_drive_t *, u8);
1408 int ide_set_dma_mode(ide_drive_t *, u8);
1409
1410 void ide_set_pio(ide_drive_t *, u8);
1411
1412 static inline void ide_set_max_pio(ide_drive_t *drive)
1413 {
1414 ide_set_pio(drive, 255);
1415 }
1416
1417 extern spinlock_t ide_lock;
1418 extern struct mutex ide_cfg_mtx;
1419 /*
1420 * Structure locking:
1421 *
1422 * ide_cfg_mtx and ide_lock together protect changes to
1423 * ide_hwif_t->{next,hwgroup}
1424 * ide_drive_t->next
1425 *
1426 * ide_hwgroup_t->busy: ide_lock
1427 * ide_hwgroup_t->hwif: ide_lock
1428 * ide_hwif_t->mate: constant, no locking
1429 * ide_drive_t->hwif: constant, no locking
1430 */
1431
1432 #define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
1433
1434 extern struct bus_type ide_bus_type;
1435 extern struct class *ide_port_class;
1436
1437 /* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1438 #define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1439
1440 /* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1441 #define ide_id_has_flush_cache_ext(id) \
1442 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1443
1444 static inline void ide_dump_identify(u8 *id)
1445 {
1446 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1447 }
1448
1449 static inline int hwif_to_node(ide_hwif_t *hwif)
1450 {
1451 struct pci_dev *dev = to_pci_dev(hwif->dev);
1452 return hwif->dev ? pcibus_to_node(dev->bus) : -1;
1453 }
1454
1455 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
1456 {
1457 ide_hwif_t *hwif = HWIF(drive);
1458
1459 return &hwif->drives[(drive->dn ^ 1) & 1];
1460 }
1461 #endif /* _IDE_H */
Support for the Chinese Samsung S3C2440 based development boards