drivers/ata/sata_sis.c

   1 /*
   2  *  sata_sis.c - Silicon Integrated Systems SATA
   3  *
   4  *  Maintained by:  Uwe Koziolek
   5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
   6  *                  on emails.
   7  *
   8  *  Copyright 2004 Uwe Koziolek
   9  *
  10  *
  11  *  This program is free software; you can redistribute it and/or modify
  12  *  it under the terms of the GNU General Public License as published by
  13  *  the Free Software Foundation; either version 2, or (at your option)
  14  *  any later version.
  15  *
  16  *  This program is distributed in the hope that it will be useful,
  17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *  GNU General Public License for more details.
  20  *
  21  *  You should have received a copy of the GNU General Public License
  22  *  along with this program; see the file COPYING.  If not, write to
  23  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  *
  26  *  libata documentation is available via 'make {ps|pdf}docs',
  27  *  as Documentation/DocBook/libata.*
  28  *
  29  *  Hardware documentation available under NDA.
  30  *
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/module.h>
  35 #include <linux/pci.h>
  36 #include <linux/init.h>
  37 #include <linux/blkdev.h>
  38 #include <linux/delay.h>
  39 #include <linux/interrupt.h>
  40 #include <linux/device.h>
  41 #include <scsi/scsi_host.h>
  42 #include <linux/libata.h>
  43 #include "sis.h"
  44
  45 #define DRV_NAME        "sata_sis"
  46 #define DRV_VERSION     "0.7"
  47
  48 enum {
  49         sis_180                 = 0,
  50         SIS_SCR_PCI_BAR         = 5,
  51
  52         /* PCI configuration registers */
  53         SIS_GENCTL              = 0x54, /* IDE General Control register */
  54         SIS_SCR_BASE            = 0xc0, /* sata0 phy SCR registers */
  55         SIS180_SATA1_OFS        = 0x10, /* offset from sata0->sata1 phy regs */
  56         SIS182_SATA1_OFS        = 0x20, /* offset from sata0->sata1 phy regs */
  57         SIS_PMR                 = 0x90, /* port mapping register */
  58         SIS_PMR_COMBINED        = 0x30,
  59
  60         /* random bits */
  61         SIS_FLAG_CFGSCR         = (1 << 30), /* host flag: SCRs via PCI cfg */
  62
  63         GENCTL_IOMAPPED_SCR     = (1 << 26), /* if set, SCRs are in IO space */
  64 };
  65
  66 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
  67 static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
  68 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
  69
  70 static const struct pci_device_id sis_pci_tbl[] = {
  71         { PCI_VDEVICE(SI, 0x0180), sis_180 },           /* SiS 964/180 */
  72         { PCI_VDEVICE(SI, 0x0181), sis_180 },           /* SiS 964/180 */
  73         { PCI_VDEVICE(SI, 0x0182), sis_180 },           /* SiS 965/965L */
  74         { PCI_VDEVICE(SI, 0x0183), sis_180 },           /* SiS 965/965L */
  75         { PCI_VDEVICE(SI, 0x1182), sis_180 },           /* SiS 966/966L */
  76         { PCI_VDEVICE(SI, 0x1183), sis_180 },           /* SiS 966/966L */
  77
  78         { }     /* terminate list */
  79 };
  80
  81 static struct pci_driver sis_pci_driver = {
  82         .name                   = DRV_NAME,
  83         .id_table               = sis_pci_tbl,
  84         .probe                  = sis_init_one,
  85         .remove                 = ata_pci_remove_one,
  86 };
  87
  88 static struct scsi_host_template sis_sht = {
  89         .module                 = THIS_MODULE,
  90         .name                   = DRV_NAME,
  91         .ioctl                  = ata_scsi_ioctl,
  92         .queuecommand           = ata_scsi_queuecmd,
  93         .can_queue              = ATA_DEF_QUEUE,
  94         .this_id                = ATA_SHT_THIS_ID,
  95         .sg_tablesize           = ATA_MAX_PRD,
  96         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
  97         .emulated               = ATA_SHT_EMULATED,
  98         .use_clustering         = ATA_SHT_USE_CLUSTERING,
  99         .proc_name              = DRV_NAME,
 100         .dma_boundary           = ATA_DMA_BOUNDARY,
 101         .slave_configure        = ata_scsi_slave_config,
 102         .slave_destroy          = ata_scsi_slave_destroy,
 103         .bios_param             = ata_std_bios_param,
 104 };
 105
 106 static const struct ata_port_operations sis_ops = {
 107         .port_disable           = ata_port_disable,
 108         .tf_load                = ata_tf_load,
 109         .tf_read                = ata_tf_read,
 110         .check_status           = ata_check_status,
 111         .exec_command           = ata_exec_command,
 112         .dev_select             = ata_std_dev_select,
 113         .bmdma_setup            = ata_bmdma_setup,
 114         .bmdma_start            = ata_bmdma_start,
 115         .bmdma_stop             = ata_bmdma_stop,
 116         .bmdma_status           = ata_bmdma_status,
 117         .qc_prep                = ata_qc_prep,
 118         .qc_issue               = ata_qc_issue_prot,
 119         .data_xfer              = ata_data_xfer,
 120         .freeze                 = ata_bmdma_freeze,
 121         .thaw                   = ata_bmdma_thaw,
 122         .error_handler          = ata_bmdma_error_handler,
 123         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
 124         .irq_handler            = ata_interrupt,
 125         .irq_clear              = ata_bmdma_irq_clear,
 126         .irq_on                 = ata_irq_on,
 127         .irq_ack                = ata_irq_ack,
 128         .scr_read               = sis_scr_read,
 129         .scr_write              = sis_scr_write,
 130         .port_start             = ata_port_start,
 131 };
 132
 133 static struct ata_port_info sis_port_info = {
 134         .sht            = &sis_sht,
 135         .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 136         .pio_mask       = 0x1f,
 137         .mwdma_mask     = 0x7,
 138         .udma_mask      = 0x7f,
 139         .port_ops       = &sis_ops,
 140 };
 141
 142 MODULE_AUTHOR("Uwe Koziolek");
 143 MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
 144 MODULE_LICENSE("GPL");
 145 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 146 MODULE_VERSION(DRV_VERSION);
 147
 148 static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
 149 {
 150         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 151         unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
 152         u8 pmr;
 153
 154         if (ap->port_no)  {
 155                 switch (pdev->device) {
 156                         case 0x0180:
 157                         case 0x0181:
 158                                 pci_read_config_byte(pdev, SIS_PMR, &pmr);
 159                                 if ((pmr & SIS_PMR_COMBINED) == 0)
 160                                         addr += SIS180_SATA1_OFS;
 161                                 break;
 162
 163                         case 0x0182:
 164                         case 0x0183:
 165                         case 0x1182:
 166                         case 0x1183:
 167                                 addr += SIS182_SATA1_OFS;
 168                                 break;
 169                 }
 170         }
 171         return addr;
 172 }
 173
 174 static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
 175 {
 176         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 177         unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
 178         u32 val, val2 = 0;
 179         u8 pmr;
 180
 181         if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
 182                 return 0xffffffff;
 183
 184         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 185
 186         pci_read_config_dword(pdev, cfg_addr, &val);
 187
 188         if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
 189             (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
 190                 pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
 191
 192         return (val|val2) &  0xfffffffb; /* avoid problems with powerdowned ports */
 193 }
 194
 195 static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 196 {
 197         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 198         unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
 199         u8 pmr;
 200
 201         if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
 202                 return;
 203
 204         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 205
 206         pci_write_config_dword(pdev, cfg_addr, val);
 207
 208         if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
 209             (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
 210                 pci_write_config_dword(pdev, cfg_addr+0x10, val);
 211 }
 212
 213 static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
 214 {
 215         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 216         u32 val, val2 = 0;
 217         u8 pmr;
 218
 219         if (sc_reg > SCR_CONTROL)
 220                 return 0xffffffffU;
 221
 222         if (ap->flags & SIS_FLAG_CFGSCR)
 223                 return sis_scr_cfg_read(ap, sc_reg);
 224
 225         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 226
 227         val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
 228
 229         if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
 230             (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
 231                 val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
 232
 233         return (val | val2) &  0xfffffffb;
 234 }
 235
 236 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 237 {
 238         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 239         u8 pmr;
 240
 241         if (sc_reg > SCR_CONTROL)
 242                 return;
 243
 244         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 245
 246         if (ap->flags & SIS_FLAG_CFGSCR)
 247                 sis_scr_cfg_write(ap, sc_reg, val);
 248         else {
 249                 iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 250                 if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
 251                     (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
 252                         iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
 253         }
 254 }
 255
 256 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 257 {
 258         static int printed_version;
 259         struct ata_probe_ent *probe_ent = NULL;
 260         int rc;
 261         u32 genctl, val;
 262         struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
 263         u8 pmr;
 264         u8 port2_start = 0x20;
 265
 266         if (!printed_version++)
 267                 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 268
 269         rc = pcim_enable_device(pdev);
 270         if (rc)
 271                 return rc;
 272
 273         rc = pci_request_regions(pdev, DRV_NAME);
 274         if (rc) {
 275                 pcim_pin_device(pdev);
 276                 return rc;
 277         }
 278
 279         rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 280         if (rc)
 281                 return rc;
 282         rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
 283         if (rc)
 284                 return rc;
 285
 286         /* check and see if the SCRs are in IO space or PCI cfg space */
 287         pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
 288         if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
 289                 pi.flags |= SIS_FLAG_CFGSCR;
 290
 291         /* if hardware thinks SCRs are in IO space, but there are
 292          * no IO resources assigned, change to PCI cfg space.
 293          */
 294         if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
 295             ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
 296              (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
 297                 genctl &= ~GENCTL_IOMAPPED_SCR;
 298                 pci_write_config_dword(pdev, SIS_GENCTL, genctl);
 299                 pi.flags |= SIS_FLAG_CFGSCR;
 300         }
 301
 302         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 303         switch (ent->device) {
 304         case 0x0180:
 305         case 0x0181:
 306
 307                 /* The PATA-handling is provided by pata_sis */
 308                 switch (pmr & 0x30) {
 309                 case 0x10:
 310                         ppi[1] = &sis_info133;
 311                         break;
 312
 313                 case 0x30:
 314                         ppi[0] = &sis_info133;
 315                         break;
 316                 }
 317                 if ((pmr & SIS_PMR_COMBINED) == 0) {
 318                         dev_printk(KERN_INFO, &pdev->dev,
 319                                    "Detected SiS 180/181/964 chipset in SATA mode\n");
 320                         port2_start = 64;
 321                 } else {
 322                         dev_printk(KERN_INFO, &pdev->dev,
 323                                    "Detected SiS 180/181 chipset in combined mode\n");
 324                         port2_start=0;
 325                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 326                 }
 327                 break;
 328
 329         case 0x0182:
 330         case 0x0183:
 331                 pci_read_config_dword ( pdev, 0x6C, &val);
 332                 if (val & (1L << 31)) {
 333                         dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
 334                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 335                 } else {
 336                         dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
 337                 }
 338                 break;
 339
 340         case 0x1182:
 341         case 0x1183:
 342                 pci_read_config_dword(pdev, 0x64, &val);
 343                 if (val & 0x10000000) {
 344                         dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
 345                 } else {
 346                         dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
 347                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 348                 }
 349                 break;
 350         }
 351
 352         probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
 353         if (!probe_ent)
 354                 return -ENOMEM;
 355
 356         if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
 357                 void __iomem *mmio;
 358
 359                 mmio = pcim_iomap(pdev, SIS_SCR_PCI_BAR, 0);
 360                 if (!mmio)
 361                         return -ENOMEM;
 362
 363                 probe_ent->port[0].scr_addr = mmio;
 364                 probe_ent->port[1].scr_addr = mmio + port2_start;
 365         }
 366
 367         pci_set_master(pdev);
 368         pci_intx(pdev, 1);
 369
 370         if (!ata_device_add(probe_ent))
 371                 return -EIO;
 372
 373         devm_kfree(&pdev->dev, probe_ent);
 374         return 0;
 375
 376 }
 377
 378 static int __init sis_init(void)
 379 {
 380         return pci_register_driver(&sis_pci_driver);
 381 }
 382
 383 static void __exit sis_exit(void)
 384 {
 385         pci_unregister_driver(&sis_pci_driver);
 386 }
 387
 388 module_init(sis_init);
 389 module_exit(sis_exit);