drivers/parport/parport_cs.c

   1 /*======================================================================
   2
   3     A driver for PCMCIA parallel port adapters
   4
   5     (specifically, for the Quatech SPP-100 EPP card: other cards will
   6     probably require driver tweaks)
   7
   8     parport_cs.c 1.29 2002/10/11 06:57:41
   9
  10     The contents of this file are subject to the Mozilla Public
  11     License Version 1.1 (the "License"); you may not use this file
  12     except in compliance with the License. You may obtain a copy of
  13     the License at http://www.mozilla.org/MPL/
  14
  15     Software distributed under the License is distributed on an "AS
  16     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  17     implied. See the License for the specific language governing
  18     rights and limitations under the License.
  19
  20     The initial developer of the original code is David A. Hinds
  21     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  22     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  23
  24     Alternatively, the contents of this file may be used under the
  25     terms of the GNU General Public License version 2 (the "GPL"), in
  26     which case the provisions of the GPL are applicable instead of the
  27     above.  If you wish to allow the use of your version of this file
  28     only under the terms of the GPL and not to allow others to use
  29     your version of this file under the MPL, indicate your decision
  30     by deleting the provisions above and replace them with the notice
  31     and other provisions required by the GPL.  If you do not delete
  32     the provisions above, a recipient may use your version of this
  33     file under either the MPL or the GPL.
  34
  35 ======================================================================*/
  36
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/init.h>
  40 #include <linux/ptrace.h>
  41 #include <linux/slab.h>
  42 #include <linux/string.h>
  43 #include <linux/timer.h>
  44 #include <linux/ioport.h>
  45 #include <linux/major.h>
  46
  47 #include <linux/parport.h>
  48 #include <linux/parport_pc.h>
  49
  50 #include <pcmcia/cs_types.h>
  51 #include <pcmcia/cs.h>
  52 #include <pcmcia/cistpl.h>
  53 #include <pcmcia/ds.h>
  54 #include <pcmcia/cisreg.h>
  55 #include <pcmcia/ciscode.h>
  56
  57 /*====================================================================*/
  58
  59 /* Module parameters */
  60
  61 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
  62 MODULE_DESCRIPTION("PCMCIA parallel port card driver");
  63 MODULE_LICENSE("Dual MPL/GPL");
  64
  65 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  66
  67 INT_MODULE_PARM(epp_mode, 1);
  68
  69 #ifdef PCMCIA_DEBUG
  70 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
  71 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
  72 static char *version =
  73 "parport_cs.c 1.29 2002/10/11 06:57:41 (David Hinds)";
  74 #else
  75 #define DEBUG(n, args...)
  76 #endif
  77
  78 /*====================================================================*/
  79
  80 #define FORCE_EPP_MODE  0x08
  81
  82 typedef struct parport_info_t {
  83         struct pcmcia_device    *p_dev;
  84     int                 ndev;
  85     dev_node_t          node;
  86     struct parport      *port;
  87 } parport_info_t;
  88
  89 static void parport_detach(struct pcmcia_device *p_dev);
  90 static int parport_config(struct pcmcia_device *link);
  91 static void parport_cs_release(struct pcmcia_device *);
  92
  93 /*======================================================================
  94
  95     parport_attach() creates an "instance" of the driver, allocating
  96     local data structures for one device.  The device is registered
  97     with Card Services.
  98
  99 ======================================================================*/
 100
 101 static int parport_probe(struct pcmcia_device *link)
 102 {
 103     parport_info_t *info;
 104
 105     DEBUG(0, "parport_attach()\n");
 106
 107     /* Create new parport device */
 108     info = kzalloc(sizeof(*info), GFP_KERNEL);
 109     if (!info) return -ENOMEM;
 110     link->priv = info;
 111     info->p_dev = link;
 112
 113     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 114     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 115     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 116     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 117     link->conf.Attributes = CONF_ENABLE_IRQ;
 118     link->conf.IntType = INT_MEMORY_AND_IO;
 119
 120     return parport_config(link);
 121 } /* parport_attach */
 122
 123 /*======================================================================
 124
 125     This deletes a driver "instance".  The device is de-registered
 126     with Card Services.  If it has been released, all local data
 127     structures are freed.  Otherwise, the structures will be freed
 128     when the device is released.
 129
 130 ======================================================================*/
 131
 132 static void parport_detach(struct pcmcia_device *link)
 133 {
 134     DEBUG(0, "parport_detach(0x%p)\n", link);
 135
 136     parport_cs_release(link);
 137
 138     kfree(link->priv);
 139 } /* parport_detach */
 140
 141 /*======================================================================
 142
 143     parport_config() is scheduled to run after a CARD_INSERTION event
 144     is received, to configure the PCMCIA socket, and to make the
 145     parport device available to the system.
 146
 147 ======================================================================*/
 148
 149 #define CS_CHECK(fn, ret) \
 150 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 151
 152 static int parport_config_check(struct pcmcia_device *p_dev,
 153                                 cistpl_cftable_entry_t *cfg,
 154                                 cistpl_cftable_entry_t *dflt,
 155                                 unsigned int vcc,
 156                                 void *priv_data)
 157 {
 158         if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 159                 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 160                 if (epp_mode)
 161                         p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
 162                 p_dev->io.BasePort1 = io->win[0].base;
 163                 p_dev->io.NumPorts1 = io->win[0].len;
 164                 p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 165                 if (io->nwin == 2) {
 166                         p_dev->io.BasePort2 = io->win[1].base;
 167                         p_dev->io.NumPorts2 = io->win[1].len;
 168                 }
 169                 if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
 170                         return -ENODEV;
 171                 return 0;
 172         }
 173         return -ENODEV;
 174 }
 175
 176 static int parport_config(struct pcmcia_device *link)
 177 {
 178     parport_info_t *info = link->priv;
 179     struct parport *p;
 180     int last_ret, last_fn;
 181
 182     DEBUG(0, "parport_config(0x%p)\n", link);
 183
 184     last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
 185     if (last_ret) {
 186             cs_error(link, RequestIO, last_ret);
 187             goto failed;
 188     }
 189
 190     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 191     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 192
 193     p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
 194                               link->irq.AssignedIRQ, PARPORT_DMA_NONE,
 195                               &link->dev);
 196     if (p == NULL) {
 197         printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
 198                "0x%3x, irq %u failed\n", link->io.BasePort1,
 199                link->irq.AssignedIRQ);
 200         goto failed;
 201     }
 202
 203     p->modes |= PARPORT_MODE_PCSPP;
 204     if (epp_mode)
 205         p->modes |= PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP;
 206     info->ndev = 1;
 207     info->node.major = LP_MAJOR;
 208     info->node.minor = p->number;
 209     info->port = p;
 210     strcpy(info->node.dev_name, p->name);
 211     link->dev_node = &info->node;
 212
 213     return 0;
 214
 215 cs_failed:
 216     cs_error(link, last_fn, last_ret);
 217 failed:
 218     parport_cs_release(link);
 219     return -ENODEV;
 220 } /* parport_config */
 221
 222 /*======================================================================
 223
 224     After a card is removed, parport_cs_release() will unregister the
 225     device, and release the PCMCIA configuration.  If the device is
 226     still open, this will be postponed until it is closed.
 227
 228 ======================================================================*/
 229
 230 static void parport_cs_release(struct pcmcia_device *link)
 231 {
 232         parport_info_t *info = link->priv;
 233
 234         DEBUG(0, "parport_release(0x%p)\n", link);
 235
 236         if (info->ndev) {
 237                 struct parport *p = info->port;
 238                 parport_pc_unregister_port(p);
 239         }
 240         info->ndev = 0;
 241
 242         pcmcia_disable_device(link);
 243 } /* parport_cs_release */
 244
 245
 246 static struct pcmcia_device_id parport_ids[] = {
 247         PCMCIA_DEVICE_FUNC_ID(3),
 248         PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
 249         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0003),
 250         PCMCIA_DEVICE_NULL
 251 };
 252 MODULE_DEVICE_TABLE(pcmcia, parport_ids);
 253
 254 static struct pcmcia_driver parport_cs_driver = {
 255         .owner          = THIS_MODULE,
 256         .drv            = {
 257                 .name   = "parport_cs",
 258         },
 259         .probe          = parport_probe,
 260         .remove         = parport_detach,
 261         .id_table       = parport_ids,
 262 };
 263
 264 static int __init init_parport_cs(void)
 265 {
 266         return pcmcia_register_driver(&parport_cs_driver);
 267 }
 268
 269 static void __exit exit_parport_cs(void)
 270 {
 271         pcmcia_unregister_driver(&parport_cs_driver);
 272 }
 273
 274 module_init(init_parport_cs);
 275 module_exit(exit_parport_cs);