2 * NET3: Implementation of the ICMP protocol layer.
4 * Alan Cox, <alan@redhat.com>
6 * Version: $Id: icmp.c,v 1.85 2002/02/01 22:01:03 davem Exp $
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
13 * Some of the function names and the icmp unreach table for this
14 * module were derived from [icmp.c 1.0.11 06/02/93] by
15 * Ross Biro, Fred N. van Kempen, Mark Evans, Alan Cox, Gerhard Koerting.
16 * Other than that this module is a complete rewrite.
19 * Clemens Fruhwirth : introduce global icmp rate limiting
20 * with icmp type masking ability instead
21 * of broken per type icmp timeouts.
22 * Mike Shaver : RFC1122 checks.
23 * Alan Cox : Multicast ping reply as self.
24 * Alan Cox : Fix atomicity lockup in ip_build_xmit
26 * Alan Cox : Added 216,128 byte paths to the MTU
28 * Martin Mares : RFC1812 checks.
29 * Martin Mares : Can be configured to follow redirects
30 * if acting as a router _without_ a
31 * routing protocol (RFC 1812).
32 * Martin Mares : Echo requests may be configured to
33 * be ignored (RFC 1812).
34 * Martin Mares : Limitation of ICMP error message
35 * transmit rate (RFC 1812).
36 * Martin Mares : TOS and Precedence set correctly
38 * Martin Mares : Now copying as much data from the
39 * original packet as we can without
40 * exceeding 576 bytes (RFC 1812).
41 * Willy Konynenberg : Transparent proxying support.
42 * Keith Owens : RFC1191 correction for 4.2BSD based
44 * Thomas Quinot : ICMP Dest Unreach codes up to 15 are
46 * Andi Kleen : Check all packet lengths properly
47 * and moved all kfree_skb() up to
49 * Andi Kleen : Move the rate limit bookkeeping
50 * into the dest entry and use a token
51 * bucket filter (thanks to ANK). Make
52 * the rates sysctl configurable.
53 * Yu Tianli : Fixed two ugly bugs in icmp_send
54 * - IP option length was accounted wrongly
55 * - ICMP header length was not accounted
57 * Tristan Greaves : Added sysctl option to ignore bogus
58 * broadcast responses from broken routers.
62 * - Should use skb_pull() instead of all the manual checking.
63 * This would also greatly simply some upper layer error handlers. --AK
67 #include <linux/module.h>
68 #include <linux/types.h>
69 #include <linux/jiffies.h>
70 #include <linux/kernel.h>
71 #include <linux/fcntl.h>
72 #include <linux/socket.h>
74 #include <linux/inet.h>
75 #include <linux/inetdevice.h>
76 #include <linux/netdevice.h>
77 #include <linux/string.h>
78 #include <linux/netfilter_ipv4.h>
81 #include <net/route.h>
82 #include <net/protocol.h>
87 #include <linux/skbuff.h>
89 #include <linux/errno.h>
90 #include <linux/timer.h>
91 #include <linux/init.h>
92 #include <asm/system.h>
93 #include <asm/uaccess.h>
94 #include <net/checksum.h>
97 * Build xmit assembly blocks
106 struct icmphdr icmph
;
110 struct ip_options replyopts
;
111 unsigned char optbuf
[40];
117 DEFINE_SNMP_STAT(struct icmp_mib
, icmp_statistics
) __read_mostly
;
118 DEFINE_SNMP_STAT(struct icmpmsg_mib
, icmpmsg_statistics
) __read_mostly
;
120 /* An array of errno for error messages from dest unreach. */
121 /* RFC 1122: 3.2.2.1 States that NET_UNREACH, HOST_UNREACH and SR_FAILED MUST be considered 'transient errs'. */
123 struct icmp_err icmp_err_convert
[] = {
125 .errno
= ENETUNREACH
, /* ICMP_NET_UNREACH */
129 .errno
= EHOSTUNREACH
, /* ICMP_HOST_UNREACH */
133 .errno
= ENOPROTOOPT
/* ICMP_PROT_UNREACH */,
137 .errno
= ECONNREFUSED
, /* ICMP_PORT_UNREACH */
141 .errno
= EMSGSIZE
, /* ICMP_FRAG_NEEDED */
145 .errno
= EOPNOTSUPP
, /* ICMP_SR_FAILED */
149 .errno
= ENETUNREACH
, /* ICMP_NET_UNKNOWN */
153 .errno
= EHOSTDOWN
, /* ICMP_HOST_UNKNOWN */
157 .errno
= ENONET
, /* ICMP_HOST_ISOLATED */
161 .errno
= ENETUNREACH
, /* ICMP_NET_ANO */
165 .errno
= EHOSTUNREACH
, /* ICMP_HOST_ANO */
169 .errno
= ENETUNREACH
, /* ICMP_NET_UNR_TOS */
173 .errno
= EHOSTUNREACH
, /* ICMP_HOST_UNR_TOS */
177 .errno
= EHOSTUNREACH
, /* ICMP_PKT_FILTERED */
181 .errno
= EHOSTUNREACH
, /* ICMP_PREC_VIOLATION */
185 .errno
= EHOSTUNREACH
, /* ICMP_PREC_CUTOFF */
190 /* Control parameters for ECHO replies. */
191 int sysctl_icmp_echo_ignore_all __read_mostly
;
192 int sysctl_icmp_echo_ignore_broadcasts __read_mostly
= 1;
194 /* Control parameter - ignore bogus broadcast responses? */
195 int sysctl_icmp_ignore_bogus_error_responses __read_mostly
= 1;
198 * Configurable global rate limit.
200 * ratelimit defines tokens/packet consumed for dst->rate_token bucket
201 * ratemask defines which icmp types are ratelimited by setting
205 * dest unreachable (3), source quench (4),
206 * time exceeded (11), parameter problem (12)
209 int sysctl_icmp_ratelimit __read_mostly
= 1 * HZ
;
210 int sysctl_icmp_ratemask __read_mostly
= 0x1818;
211 int sysctl_icmp_errors_use_inbound_ifaddr __read_mostly
;
214 * ICMP control array. This specifies what to do with each ICMP.
217 struct icmp_control
{
218 void (*handler
)(struct sk_buff
*skb
);
219 short error
; /* This ICMP is classed as an error message */
222 static const struct icmp_control icmp_pointers
[NR_ICMP_TYPES
+1];
225 * The ICMP socket(s). This is the most convenient way to flow control
226 * our ICMP output as well as maintain a clean interface throughout
227 * all layers. All Socketless IP sends will soon be gone.
229 * On SMP we have one ICMP socket per-cpu.
231 static DEFINE_PER_CPU(struct socket
*, __icmp_socket
) = NULL
;
232 #define icmp_socket __get_cpu_var(__icmp_socket)
234 static __inline__
int icmp_xmit_lock(void)
238 if (unlikely(!spin_trylock(&icmp_socket
->sk
->sk_lock
.slock
))) {
239 /* This can happen if the output path signals a
240 * dst_link_failure() for an outgoing ICMP packet.
248 static void icmp_xmit_unlock(void)
250 spin_unlock_bh(&icmp_socket
->sk
->sk_lock
.slock
);
254 * Send an ICMP frame.
258 * Check transmit rate limitation for given message.
259 * The rate information is held in the destination cache now.
260 * This function is generic and could be used for other purposes
261 * too. It uses a Token bucket filter as suggested by Alexey Kuznetsov.
263 * Note that the same dst_entry fields are modified by functions in
264 * route.c too, but these work for packet destinations while xrlim_allow
265 * works for icmp destinations. This means the rate limiting information
266 * for one "ip object" is shared - and these ICMPs are twice limited:
267 * by source and by destination.
269 * RFC 1812: 4.3.2.8 SHOULD be able to limit error message rate
270 * SHOULD allow setting of rate limits
272 * Shared between ICMPv4 and ICMPv6.
274 #define XRLIM_BURST_FACTOR 6
275 int xrlim_allow(struct dst_entry
*dst
, int timeout
)
281 dst
->rate_tokens
+= now
- dst
->rate_last
;
282 dst
->rate_last
= now
;
283 if (dst
->rate_tokens
> XRLIM_BURST_FACTOR
* timeout
)
284 dst
->rate_tokens
= XRLIM_BURST_FACTOR
* timeout
;
285 if (dst
->rate_tokens
>= timeout
) {
286 dst
->rate_tokens
-= timeout
;
292 static inline int icmpv4_xrlim_allow(struct rtable
*rt
, int type
, int code
)
294 struct dst_entry
*dst
= &rt
->u
.dst
;
297 if (type
> NR_ICMP_TYPES
)
300 /* Don't limit PMTU discovery. */
301 if (type
== ICMP_DEST_UNREACH
&& code
== ICMP_FRAG_NEEDED
)
304 /* No rate limit on loopback */
305 if (dst
->dev
&& (dst
->dev
->flags
&IFF_LOOPBACK
))
308 /* Limit if icmp type is enabled in ratemask. */
309 if ((1 << type
) & sysctl_icmp_ratemask
)
310 rc
= xrlim_allow(dst
, sysctl_icmp_ratelimit
);
316 * Maintain the counters used in the SNMP statistics for outgoing ICMP
318 void icmp_out_count(unsigned char type
)
320 ICMPMSGOUT_INC_STATS(type
);
321 ICMP_INC_STATS(ICMP_MIB_OUTMSGS
);
325 * Checksum each fragment, and on the first include the headers and final
328 static int icmp_glue_bits(void *from
, char *to
, int offset
, int len
, int odd
,
331 struct icmp_bxm
*icmp_param
= (struct icmp_bxm
*)from
;
334 csum
= skb_copy_and_csum_bits(icmp_param
->skb
,
335 icmp_param
->offset
+ offset
,
338 skb
->csum
= csum_block_add(skb
->csum
, csum
, odd
);
339 if (icmp_pointers
[icmp_param
->data
.icmph
.type
].error
)
340 nf_ct_attach(skb
, icmp_param
->skb
);
344 static void icmp_push_reply(struct icmp_bxm
*icmp_param
,
345 struct ipcm_cookie
*ipc
, struct rtable
*rt
)
349 if (ip_append_data(icmp_socket
->sk
, icmp_glue_bits
, icmp_param
,
350 icmp_param
->data_len
+icmp_param
->head_len
,
351 icmp_param
->head_len
,
352 ipc
, rt
, MSG_DONTWAIT
) < 0)
353 ip_flush_pending_frames(icmp_socket
->sk
);
354 else if ((skb
= skb_peek(&icmp_socket
->sk
->sk_write_queue
)) != NULL
) {
355 struct icmphdr
*icmph
= icmp_hdr(skb
);
357 struct sk_buff
*skb1
;
359 skb_queue_walk(&icmp_socket
->sk
->sk_write_queue
, skb1
) {
360 csum
= csum_add(csum
, skb1
->csum
);
362 csum
= csum_partial_copy_nocheck((void *)&icmp_param
->data
,
364 icmp_param
->head_len
, csum
);
365 icmph
->checksum
= csum_fold(csum
);
366 skb
->ip_summed
= CHECKSUM_NONE
;
367 ip_push_pending_frames(icmp_socket
->sk
);
372 * Driving logic for building and sending ICMP messages.
375 static void icmp_reply(struct icmp_bxm
*icmp_param
, struct sk_buff
*skb
)
377 struct sock
*sk
= icmp_socket
->sk
;
378 struct inet_sock
*inet
= inet_sk(sk
);
379 struct ipcm_cookie ipc
;
380 struct rtable
*rt
= (struct rtable
*)skb
->dst
;
383 if (ip_options_echo(&icmp_param
->replyopts
, skb
))
386 if (icmp_xmit_lock())
389 icmp_param
->data
.icmph
.checksum
= 0;
391 inet
->tos
= ip_hdr(skb
)->tos
;
392 daddr
= ipc
.addr
= rt
->rt_src
;
394 if (icmp_param
->replyopts
.optlen
) {
395 ipc
.opt
= &icmp_param
->replyopts
;
397 daddr
= icmp_param
->replyopts
.faddr
;
400 struct flowi fl
= { .nl_u
= { .ip4_u
=
402 .saddr
= rt
->rt_spec_dst
,
403 .tos
= RT_TOS(ip_hdr(skb
)->tos
) } },
404 .proto
= IPPROTO_ICMP
};
405 security_skb_classify_flow(skb
, &fl
);
406 if (ip_route_output_key(&rt
, &fl
))
409 if (icmpv4_xrlim_allow(rt
, icmp_param
->data
.icmph
.type
,
410 icmp_param
->data
.icmph
.code
))
411 icmp_push_reply(icmp_param
, &ipc
, rt
);
419 * Send an ICMP message in response to a situation
421 * RFC 1122: 3.2.2 MUST send at least the IP header and 8 bytes of header.
422 * MAY send more (we do).
423 * MUST NOT change this header information.
424 * MUST NOT reply to a multicast/broadcast IP address.
425 * MUST NOT reply to a multicast/broadcast MAC address.
426 * MUST reply to only the first fragment.
429 void icmp_send(struct sk_buff
*skb_in
, int type
, int code
, __be32 info
)
433 struct icmp_bxm icmp_param
;
434 struct rtable
*rt
= (struct rtable
*)skb_in
->dst
;
435 struct ipcm_cookie ipc
;
443 * Find the original header. It is expected to be valid, of course.
444 * Check this, icmp_send is called from the most obscure devices
447 iph
= ip_hdr(skb_in
);
449 if ((u8
*)iph
< skb_in
->head
||
450 (skb_in
->network_header
+ sizeof(*iph
)) > skb_in
->tail
)
454 * No replies to physical multicast/broadcast
456 if (skb_in
->pkt_type
!= PACKET_HOST
)
460 * Now check at the protocol level
462 if (rt
->rt_flags
& (RTCF_BROADCAST
| RTCF_MULTICAST
))
466 * Only reply to fragment 0. We byte re-order the constant
467 * mask for efficiency.
469 if (iph
->frag_off
& htons(IP_OFFSET
))
473 * If we send an ICMP error to an ICMP error a mess would result..
475 if (icmp_pointers
[type
].error
) {
477 * We are an error, check if we are replying to an
480 if (iph
->protocol
== IPPROTO_ICMP
) {
481 u8 _inner_type
, *itp
;
483 itp
= skb_header_pointer(skb_in
,
484 skb_network_header(skb_in
) +
486 offsetof(struct icmphdr
,
495 * Assume any unknown ICMP type is an error. This
496 * isn't specified by the RFC, but think about it..
498 if (*itp
> NR_ICMP_TYPES
||
499 icmp_pointers
[*itp
].error
)
504 if (icmp_xmit_lock())
508 * Construct source address and options.
512 if (!(rt
->rt_flags
& RTCF_LOCAL
)) {
513 struct net_device
*dev
= NULL
;
515 if (rt
->fl
.iif
&& sysctl_icmp_errors_use_inbound_ifaddr
)
516 dev
= dev_get_by_index(&init_net
, rt
->fl
.iif
);
519 saddr
= inet_select_addr(dev
, 0, RT_SCOPE_LINK
);
525 tos
= icmp_pointers
[type
].error
? ((iph
->tos
& IPTOS_TOS_MASK
) |
526 IPTOS_PREC_INTERNETCONTROL
) :
529 if (ip_options_echo(&icmp_param
.replyopts
, skb_in
))
534 * Prepare data for ICMP header.
537 icmp_param
.data
.icmph
.type
= type
;
538 icmp_param
.data
.icmph
.code
= code
;
539 icmp_param
.data
.icmph
.un
.gateway
= info
;
540 icmp_param
.data
.icmph
.checksum
= 0;
541 icmp_param
.skb
= skb_in
;
542 icmp_param
.offset
= skb_network_offset(skb_in
);
543 inet_sk(icmp_socket
->sk
)->tos
= tos
;
544 ipc
.addr
= iph
->saddr
;
545 ipc
.opt
= &icmp_param
.replyopts
;
551 .daddr
= icmp_param
.replyopts
.srr
?
552 icmp_param
.replyopts
.faddr
:
558 .proto
= IPPROTO_ICMP
,
566 security_skb_classify_flow(skb_in
, &fl
);
567 if (ip_route_output_key(&rt
, &fl
))
571 if (!icmpv4_xrlim_allow(rt
, type
, code
))
574 /* RFC says return as much as we can without exceeding 576 bytes. */
576 room
= dst_mtu(&rt
->u
.dst
);
579 room
-= sizeof(struct iphdr
) + icmp_param
.replyopts
.optlen
;
580 room
-= sizeof(struct icmphdr
);
582 icmp_param
.data_len
= skb_in
->len
- icmp_param
.offset
;
583 if (icmp_param
.data_len
> room
)
584 icmp_param
.data_len
= room
;
585 icmp_param
.head_len
= sizeof(struct icmphdr
);
587 icmp_push_reply(&icmp_param
, &ipc
, rt
);
597 * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, and ICMP_QUENCH.
600 static void icmp_unreach(struct sk_buff
*skb
)
603 struct icmphdr
*icmph
;
605 struct net_protocol
*ipprot
;
610 * Incomplete header ?
611 * Only checks for the IP header, there should be an
612 * additional check for longer headers in upper levels.
615 if (!pskb_may_pull(skb
, sizeof(struct iphdr
)))
618 icmph
= icmp_hdr(skb
);
619 iph
= (struct iphdr
*)skb
->data
;
621 if (iph
->ihl
< 5) /* Mangled header, drop. */
624 if (icmph
->type
== ICMP_DEST_UNREACH
) {
625 switch (icmph
->code
& 15) {
626 case ICMP_NET_UNREACH
:
627 case ICMP_HOST_UNREACH
:
628 case ICMP_PROT_UNREACH
:
629 case ICMP_PORT_UNREACH
:
631 case ICMP_FRAG_NEEDED
:
632 if (ipv4_config
.no_pmtu_disc
) {
633 LIMIT_NETDEBUG(KERN_INFO
"ICMP: %u.%u.%u.%u: "
634 "fragmentation needed "
636 NIPQUAD(iph
->daddr
));
638 info
= ip_rt_frag_needed(iph
,
639 ntohs(icmph
->un
.frag
.mtu
));
645 LIMIT_NETDEBUG(KERN_INFO
"ICMP: %u.%u.%u.%u: Source "
647 NIPQUAD(iph
->daddr
));
652 if (icmph
->code
> NR_ICMP_UNREACH
)
654 } else if (icmph
->type
== ICMP_PARAMETERPROB
)
655 info
= ntohl(icmph
->un
.gateway
) >> 24;
658 * Throw it at our lower layers
660 * RFC 1122: 3.2.2 MUST extract the protocol ID from the passed
662 * RFC 1122: 3.2.2.1 MUST pass ICMP unreach messages to the
664 * RFC 1122: 3.2.2.2 MUST pass ICMP time expired messages to
669 * Check the other end isnt violating RFC 1122. Some routers send
670 * bogus responses to broadcast frames. If you see this message
671 * first check your netmask matches at both ends, if it does then
672 * get the other vendor to fix their kit.
675 if (!sysctl_icmp_ignore_bogus_error_responses
&&
676 inet_addr_type(iph
->daddr
) == RTN_BROADCAST
) {
678 printk(KERN_WARNING
"%u.%u.%u.%u sent an invalid ICMP "
680 "error to a broadcast: %u.%u.%u.%u on %s\n",
681 NIPQUAD(ip_hdr(skb
)->saddr
),
682 icmph
->type
, icmph
->code
,
688 /* Checkin full IP header plus 8 bytes of protocol to
689 * avoid additional coding at protocol handlers.
691 if (!pskb_may_pull(skb
, iph
->ihl
* 4 + 8))
694 iph
= (struct iphdr
*)skb
->data
;
695 protocol
= iph
->protocol
;
698 * Deliver ICMP message to raw sockets. Pretty useless feature?
701 /* Note: See raw.c and net/raw.h, RAWV4_HTABLE_SIZE==MAX_INET_PROTOS */
702 hash
= protocol
& (MAX_INET_PROTOS
- 1);
703 read_lock(&raw_v4_lock
);
704 if ((raw_sk
= sk_head(&raw_v4_htable
[hash
])) != NULL
) {
705 while ((raw_sk
= __raw_v4_lookup(raw_sk
, protocol
, iph
->daddr
,
707 skb
->dev
->ifindex
)) != NULL
) {
708 raw_err(raw_sk
, skb
, info
);
709 raw_sk
= sk_next(raw_sk
);
710 iph
= (struct iphdr
*)skb
->data
;
713 read_unlock(&raw_v4_lock
);
716 ipprot
= rcu_dereference(inet_protos
[hash
]);
717 if (ipprot
&& ipprot
->err_handler
)
718 ipprot
->err_handler(skb
, info
);
724 ICMP_INC_STATS_BH(ICMP_MIB_INERRORS
);
730 * Handle ICMP_REDIRECT.
733 static void icmp_redirect(struct sk_buff
*skb
)
737 if (skb
->len
< sizeof(struct iphdr
))
741 * Get the copied header of the packet that caused the redirect
743 if (!pskb_may_pull(skb
, sizeof(struct iphdr
)))
746 iph
= (struct iphdr
*)skb
->data
;
748 switch (icmp_hdr(skb
)->code
& 7) {
750 case ICMP_REDIR_NETTOS
:
752 * As per RFC recommendations now handle it as a host redirect.
754 case ICMP_REDIR_HOST
:
755 case ICMP_REDIR_HOSTTOS
:
756 ip_rt_redirect(ip_hdr(skb
)->saddr
, iph
->daddr
,
757 icmp_hdr(skb
)->un
.gateway
,
758 iph
->saddr
, skb
->dev
);
764 ICMP_INC_STATS_BH(ICMP_MIB_INERRORS
);
769 * Handle ICMP_ECHO ("ping") requests.
771 * RFC 1122: 3.2.2.6 MUST have an echo server that answers ICMP echo
773 * RFC 1122: 3.2.2.6 Data received in the ICMP_ECHO request MUST be
774 * included in the reply.
775 * RFC 1812: 4.3.3.6 SHOULD have a config option for silently ignoring
776 * echo requests, MUST have default=NOT.
777 * See also WRT handling of options once they are done and working.
780 static void icmp_echo(struct sk_buff
*skb
)
782 if (!sysctl_icmp_echo_ignore_all
) {
783 struct icmp_bxm icmp_param
;
785 icmp_param
.data
.icmph
= *icmp_hdr(skb
);
786 icmp_param
.data
.icmph
.type
= ICMP_ECHOREPLY
;
787 icmp_param
.skb
= skb
;
788 icmp_param
.offset
= 0;
789 icmp_param
.data_len
= skb
->len
;
790 icmp_param
.head_len
= sizeof(struct icmphdr
);
791 icmp_reply(&icmp_param
, skb
);
796 * Handle ICMP Timestamp requests.
797 * RFC 1122: 3.2.2.8 MAY implement ICMP timestamp requests.
798 * SHOULD be in the kernel for minimum random latency.
799 * MUST be accurate to a few minutes.
800 * MUST be updated at least at 15Hz.
802 static void icmp_timestamp(struct sk_buff
*skb
)
805 struct icmp_bxm icmp_param
;
813 * Fill in the current time as ms since midnight UT:
815 do_gettimeofday(&tv
);
816 icmp_param
.data
.times
[1] = htonl((tv
.tv_sec
% 86400) * 1000 +
818 icmp_param
.data
.times
[2] = icmp_param
.data
.times
[1];
819 if (skb_copy_bits(skb
, 0, &icmp_param
.data
.times
[0], 4))
821 icmp_param
.data
.icmph
= *icmp_hdr(skb
);
822 icmp_param
.data
.icmph
.type
= ICMP_TIMESTAMPREPLY
;
823 icmp_param
.data
.icmph
.code
= 0;
824 icmp_param
.skb
= skb
;
825 icmp_param
.offset
= 0;
826 icmp_param
.data_len
= 0;
827 icmp_param
.head_len
= sizeof(struct icmphdr
) + 12;
828 icmp_reply(&icmp_param
, skb
);
832 ICMP_INC_STATS_BH(ICMP_MIB_INERRORS
);
838 * Handle ICMP_ADDRESS_MASK requests. (RFC950)
840 * RFC1122 (3.2.2.9). A host MUST only send replies to
841 * ADDRESS_MASK requests if it's been configured as an address mask
842 * agent. Receiving a request doesn't constitute implicit permission to
843 * act as one. Of course, implementing this correctly requires (SHOULD)
844 * a way to turn the functionality on and off. Another one for sysctl(),
847 * RFC1812 (4.3.3.9). A router MUST implement it.
848 * A router SHOULD have switch turning it on/off.
849 * This switch MUST be ON by default.
851 * Gratuitous replies, zero-source replies are not implemented,
852 * that complies with RFC. DO NOT implement them!!! All the idea
853 * of broadcast addrmask replies as specified in RFC950 is broken.
854 * The problem is that it is not uncommon to have several prefixes
855 * on one physical interface. Moreover, addrmask agent can even be
856 * not aware of existing another prefixes.
857 * If source is zero, addrmask agent cannot choose correct prefix.
858 * Gratuitous mask announcements suffer from the same problem.
859 * RFC1812 explains it, but still allows to use ADDRMASK,
860 * that is pretty silly. --ANK
862 * All these rules are so bizarre, that I removed kernel addrmask
863 * support at all. It is wrong, it is obsolete, nobody uses it in
866 * Furthermore you can do it with a usermode address agent program
870 static void icmp_address(struct sk_buff
*skb
)
874 printk(KERN_DEBUG
"a guy asks for address mask. Who is it?\n");
879 * RFC1812 (4.3.3.9). A router SHOULD listen all replies, and complain
880 * loudly if an inconsistency is found.
883 static void icmp_address_reply(struct sk_buff
*skb
)
885 struct rtable
*rt
= (struct rtable
*)skb
->dst
;
886 struct net_device
*dev
= skb
->dev
;
887 struct in_device
*in_dev
;
888 struct in_ifaddr
*ifa
;
890 if (skb
->len
< 4 || !(rt
->rt_flags
&RTCF_DIRECTSRC
))
893 in_dev
= in_dev_get(dev
);
897 if (in_dev
->ifa_list
&&
898 IN_DEV_LOG_MARTIANS(in_dev
) &&
899 IN_DEV_FORWARD(in_dev
)) {
902 mp
= skb_header_pointer(skb
, 0, sizeof(_mask
), &_mask
);
904 for (ifa
= in_dev
->ifa_list
; ifa
; ifa
= ifa
->ifa_next
) {
905 if (*mp
== ifa
->ifa_mask
&&
906 inet_ifa_match(rt
->rt_src
, ifa
))
909 if (!ifa
&& net_ratelimit()) {
910 printk(KERN_INFO
"Wrong address mask %u.%u.%u.%u from "
912 NIPQUAD(*mp
), dev
->name
, NIPQUAD(rt
->rt_src
));
920 static void icmp_discard(struct sk_buff
*skb
)
925 * Deal with incoming ICMP packets.
927 int icmp_rcv(struct sk_buff
*skb
)
929 struct icmphdr
*icmph
;
930 struct rtable
*rt
= (struct rtable
*)skb
->dst
;
932 ICMP_INC_STATS_BH(ICMP_MIB_INMSGS
);
934 switch (skb
->ip_summed
) {
935 case CHECKSUM_COMPLETE
:
936 if (!csum_fold(skb
->csum
))
941 if (__skb_checksum_complete(skb
))
945 if (!pskb_pull(skb
, sizeof(struct icmphdr
)))
948 icmph
= icmp_hdr(skb
);
950 ICMPMSGIN_INC_STATS_BH(icmph
->type
);
952 * 18 is the highest 'known' ICMP type. Anything else is a mystery
954 * RFC 1122: 3.2.2 Unknown ICMP messages types MUST be silently
957 if (icmph
->type
> NR_ICMP_TYPES
)
962 * Parse the ICMP message
965 if (rt
->rt_flags
& (RTCF_BROADCAST
| RTCF_MULTICAST
)) {
967 * RFC 1122: 3.2.2.6 An ICMP_ECHO to broadcast MAY be
968 * silently ignored (we let user decide with a sysctl).
969 * RFC 1122: 3.2.2.8 An ICMP_TIMESTAMP MAY be silently
970 * discarded if to broadcast/multicast.
972 if ((icmph
->type
== ICMP_ECHO
||
973 icmph
->type
== ICMP_TIMESTAMP
) &&
974 sysctl_icmp_echo_ignore_broadcasts
) {
977 if (icmph
->type
!= ICMP_ECHO
&&
978 icmph
->type
!= ICMP_TIMESTAMP
&&
979 icmph
->type
!= ICMP_ADDRESS
&&
980 icmph
->type
!= ICMP_ADDRESSREPLY
) {
985 icmp_pointers
[icmph
->type
].handler(skb
);
991 ICMP_INC_STATS_BH(ICMP_MIB_INERRORS
);
996 * This table is the definition of how we handle ICMP.
998 static const struct icmp_control icmp_pointers
[NR_ICMP_TYPES
+ 1] = {
1000 .handler
= icmp_discard
,
1003 .handler
= icmp_discard
,
1007 .handler
= icmp_discard
,
1010 [ICMP_DEST_UNREACH
] = {
1011 .handler
= icmp_unreach
,
1014 [ICMP_SOURCE_QUENCH
] = {
1015 .handler
= icmp_unreach
,
1019 .handler
= icmp_redirect
,
1023 .handler
= icmp_discard
,
1027 .handler
= icmp_discard
,
1031 .handler
= icmp_echo
,
1034 .handler
= icmp_discard
,
1038 .handler
= icmp_discard
,
1041 [ICMP_TIME_EXCEEDED
] = {
1042 .handler
= icmp_unreach
,
1045 [ICMP_PARAMETERPROB
] = {
1046 .handler
= icmp_unreach
,
1049 [ICMP_TIMESTAMP
] = {
1050 .handler
= icmp_timestamp
,
1052 [ICMP_TIMESTAMPREPLY
] = {
1053 .handler
= icmp_discard
,
1055 [ICMP_INFO_REQUEST
] = {
1056 .handler
= icmp_discard
,
1058 [ICMP_INFO_REPLY
] = {
1059 .handler
= icmp_discard
,
1062 .handler
= icmp_address
,
1064 [ICMP_ADDRESSREPLY
] = {
1065 .handler
= icmp_address_reply
,
1069 void __init
icmp_init(struct net_proto_family
*ops
)
1071 struct inet_sock
*inet
;
1074 for_each_possible_cpu(i
) {
1077 err
= sock_create_kern(PF_INET
, SOCK_RAW
, IPPROTO_ICMP
,
1078 &per_cpu(__icmp_socket
, i
));
1081 panic("Failed to create the ICMP control socket.\n");
1083 per_cpu(__icmp_socket
, i
)->sk
->sk_allocation
= GFP_ATOMIC
;
1085 /* Enough space for 2 64K ICMP packets, including
1086 * sk_buff struct overhead.
1088 per_cpu(__icmp_socket
, i
)->sk
->sk_sndbuf
=
1089 (2 * ((64 * 1024) + sizeof(struct sk_buff
)));
1091 inet
= inet_sk(per_cpu(__icmp_socket
, i
)->sk
);
1093 inet
->pmtudisc
= IP_PMTUDISC_DONT
;
1095 /* Unhash it so that IP input processing does not even
1096 * see it, we do not wish this socket to see incoming
1099 per_cpu(__icmp_socket
, i
)->sk
->sk_prot
->unhash(per_cpu(__icmp_socket
, i
)->sk
);
1103 EXPORT_SYMBOL(icmp_err_convert
);
1104 EXPORT_SYMBOL(icmp_send
);
1105 EXPORT_SYMBOL(icmp_statistics
);
1106 EXPORT_SYMBOL(xrlim_allow
);