arch/arm/mach-at91rm9200/board-dk.c

   1 /*
   2  * linux/arch/arm/mach-at91rm9200/board-dk.c
   3  *
   4  *  Copyright (C) 2005 SAN People
   5  *
   6  *  Epson S1D framebuffer glue code is:
   7  *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  */
  23
  24 #include <linux/types.h>
  25 #include <linux/init.h>
  26 #include <linux/mm.h>
  27 #include <linux/module.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/spi/spi.h>
  30
  31 #include <asm/hardware.h>
  32 #include <asm/setup.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/irq.h>
  35
  36 #include <asm/mach/arch.h>
  37 #include <asm/mach/map.h>
  38 #include <asm/mach/irq.h>
  39
  40 #include <asm/hardware.h>
  41 #include <asm/arch/board.h>
  42 #include <asm/arch/gpio.h>
  43
  44 #include "generic.h"
  45
  46 static void __init dk_init_irq(void)
  47 {
  48         /* Initialize AIC controller */
  49         at91rm9200_init_irq(NULL);
  50
  51         /* Set up the GPIO interrupts */
  52         at91_gpio_irq_setup(BGA_GPIO_BANKS);
  53 }
  54
  55 /*
  56  * Serial port configuration.
  57  *    0 .. 3 = USART0 .. USART3
  58  *    4      = DBGU
  59  */
  60 static struct at91_uart_config __initdata dk_uart_config = {
  61         .console_tty    = 0,                            /* ttyS0 */
  62         .nr_tty         = 2,
  63         .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
  64 };
  65
  66 static void __init dk_map_io(void)
  67 {
  68         at91rm9200_map_io();
  69
  70         /* Initialize clocks: 18.432 MHz crystal */
  71         at91_clock_init(18432000);
  72
  73         /* Setup the LEDs */
  74         at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
  75
  76         /* Setup the serial ports and console */
  77         at91_init_serial(&dk_uart_config);
  78 }
  79
  80 static struct at91_eth_data __initdata dk_eth_data = {
  81         .phy_irq_pin    = AT91_PIN_PC4,
  82         .is_rmii        = 1,
  83 };
  84
  85 static struct at91_usbh_data __initdata dk_usbh_data = {
  86         .ports          = 2,
  87 };
  88
  89 static struct at91_udc_data __initdata dk_udc_data = {
  90         .vbus_pin       = AT91_PIN_PD4,
  91         .pullup_pin     = AT91_PIN_PD5,
  92 };
  93
  94 static struct at91_cf_data __initdata dk_cf_data = {
  95         .det_pin        = AT91_PIN_PB0,
  96         .rst_pin        = AT91_PIN_PC5,
  97         // .irq_pin     = ... not connected
  98         // .vcc_pin     = ... always powered
  99 };
 100
 101 static struct at91_mmc_data __initdata dk_mmc_data = {
 102         .is_b           = 0,
 103         .wire4          = 1,
 104 };
 105
 106 static struct spi_board_info dk_spi_devices[] = {
 107         {       /* DataFlash chip */
 108                 .modalias       = "mtd_dataflash",
 109                 .chip_select    = 0,
 110                 .max_speed_hz   = 15 * 1000 * 1000,
 111         },
 112         {       /* UR6HCPS2-SP40 PS2-to-SPI adapter */
 113                 .modalias       = "ur6hcps2",
 114                 .chip_select    = 1,
 115                 .max_speed_hz   = 250 *  1000,
 116         },
 117         {       /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
 118                 .modalias       = "tlv1504",
 119                 .chip_select    = 2,
 120                 .max_speed_hz   = 20 * 1000 * 1000,
 121         },
 122 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
 123         {       /* DataFlash card */
 124                 .modalias       = "mtd_dataflash",
 125                 .chip_select    = 3,
 126                 .max_speed_hz   = 15 * 1000 * 1000,
 127         }
 128 #endif
 129 };
 130
 131 static void __init dk_board_init(void)
 132 {
 133         /* Serial */
 134         at91_add_device_serial();
 135         /* Ethernet */
 136         at91_add_device_eth(&dk_eth_data);
 137         /* USB Host */
 138         at91_add_device_usbh(&dk_usbh_data);
 139         /* USB Device */
 140         at91_add_device_udc(&dk_udc_data);
 141         at91_set_multi_drive(dk_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
 142         /* Compact Flash */
 143         at91_add_device_cf(&dk_cf_data);
 144         /* I2C */
 145         at91_add_device_i2c();
 146         /* SPI */
 147         at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
 148 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
 149         /* DataFlash card */
 150         at91_set_gpio_output(AT91_PIN_PB7, 0);
 151 #else
 152         /* MMC */
 153         at91_set_gpio_output(AT91_PIN_PB7, 1);  /* this MMC card slot can optionally use SPI signaling (CS3). */
 154         at91_add_device_mmc(&dk_mmc_data);
 155 #endif
 156         /* VGA */
 157 //      dk_add_device_video();
 158 }
 159
 160 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 161         /* Maintainer: SAN People/Atmel */
 162         .phys_io        = AT91_BASE_SYS,
 163         .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 164         .boot_params    = AT91_SDRAM_BASE + 0x100,
 165         .timer          = &at91rm9200_timer,
 166         .map_io         = dk_map_io,
 167         .init_irq       = dk_init_irq,
 168         .init_machine   = dk_board_init,
 169 MACHINE_END