?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[SCSI] lpfc 8.2.6 : Multiple discovery fixes
[linux-2.6/mini2440.git] / drivers / ata / sata_inic162x.c
blob59e65edc5820123169441619fbb515011e837410
1 /*
2 * sata_inic162x.c - Driver for Initio 162x SATA controllers
3 *
4 * Copyright 2006 SUSE Linux Products GmbH
5 * Copyright 2006 Tejun Heo <teheo@novell.com>
6 *
7 * This file is released under GPL v2.
8 *
9 * This controller is eccentric and easily locks up if something isn't
10 * right. Documentation is available at initio's website but it only
11 * documents registers (not programming model).
12 *
13 * - ATA disks work.
14 * - Hotplug works.
15 * - ATAPI read works but burning doesn't. This thing is really
16 * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
17 * ATAPI DMA WRITE should be programmed. If you've got a clue, be
18 * my guest.
19 * - Both STR and STD work.
20 */
21
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <scsi/scsi_host.h>
26 #include <linux/libata.h>
27 #include <linux/blkdev.h>
28 #include <scsi/scsi_device.h>
29
30 #define DRV_NAME "sata_inic162x"
31 #define DRV_VERSION "0.3"
32
33 enum {
34 MMIO_BAR = 5,
35
36 NR_PORTS = 2,
37
38 HOST_CTL = 0x7c,
39 HOST_STAT = 0x7e,
40 HOST_IRQ_STAT = 0xbc,
41 HOST_IRQ_MASK = 0xbe,
42
43 PORT_SIZE = 0x40,
44
45 /* registers for ATA TF operation */
46 PORT_TF = 0x00,
47 PORT_ALT_STAT = 0x08,
48 PORT_IRQ_STAT = 0x09,
49 PORT_IRQ_MASK = 0x0a,
50 PORT_PRD_CTL = 0x0b,
51 PORT_PRD_ADDR = 0x0c,
52 PORT_PRD_XFERLEN = 0x10,
53
54 /* IDMA register */
55 PORT_IDMA_CTL = 0x14,
56
57 PORT_SCR = 0x20,
58
59 /* HOST_CTL bits */
60 HCTL_IRQOFF = (1 << 8), /* global IRQ off */
61 HCTL_PWRDWN = (1 << 13), /* power down PHYs */
62 HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
63 HCTL_RPGSEL = (1 << 15), /* register page select */
64
65 HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
66 HCTL_RPGSEL,
67
68 /* HOST_IRQ_(STAT|MASK) bits */
69 HIRQ_PORT0 = (1 << 0),
70 HIRQ_PORT1 = (1 << 1),
71 HIRQ_SOFT = (1 << 14),
72 HIRQ_GLOBAL = (1 << 15), /* STAT only */
73
74 /* PORT_IRQ_(STAT|MASK) bits */
75 PIRQ_OFFLINE = (1 << 0), /* device unplugged */
76 PIRQ_ONLINE = (1 << 1), /* device plugged */
77 PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
78 PIRQ_FATAL = (1 << 3), /* fatal error */
79 PIRQ_ATA = (1 << 4), /* ATA interrupt */
80 PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
81 PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
82
83 PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
84
85 PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
86 PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
87 PIRQ_MASK_FREEZE = 0xff,
88
89 /* PORT_PRD_CTL bits */
90 PRD_CTL_START = (1 << 0),
91 PRD_CTL_WR = (1 << 3),
92 PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
93
94 /* PORT_IDMA_CTL bits */
95 IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
96 IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
97 IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
98 IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
99 };
100
101 struct inic_host_priv {
102 u16 cached_hctl;
103 };
104
105 struct inic_port_priv {
106 u8 dfl_prdctl;
107 u8 cached_prdctl;
108 u8 cached_pirq_mask;
109 };
110
111 static struct scsi_host_template inic_sht = {
112 .module = THIS_MODULE,
113 .name = DRV_NAME,
114 .ioctl = ata_scsi_ioctl,
115 .queuecommand = ata_scsi_queuecmd,
116 .can_queue = ATA_DEF_QUEUE,
117 .this_id = ATA_SHT_THIS_ID,
118 .sg_tablesize = LIBATA_MAX_PRD,
119 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
120 .emulated = ATA_SHT_EMULATED,
121 .use_clustering = ATA_SHT_USE_CLUSTERING,
122 .proc_name = DRV_NAME,
123 .dma_boundary = ATA_DMA_BOUNDARY,
124 .slave_configure = ata_scsi_slave_config,
125 .slave_destroy = ata_scsi_slave_destroy,
126 .bios_param = ata_std_bios_param,
127 };
128
129 static const int scr_map[] = {
130 [SCR_STATUS] = 0,
131 [SCR_ERROR] = 1,
132 [SCR_CONTROL] = 2,
133 };
134
135 static void __iomem *inic_port_base(struct ata_port *ap)
136 {
137 return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
138 }
139
140 static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
141 {
142 void __iomem *port_base = inic_port_base(ap);
143 struct inic_port_priv *pp = ap->private_data;
144
145 writeb(mask, port_base + PORT_IRQ_MASK);
146 pp->cached_pirq_mask = mask;
147 }
148
149 static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
150 {
151 struct inic_port_priv *pp = ap->private_data;
152
153 if (pp->cached_pirq_mask != mask)
154 __inic_set_pirq_mask(ap, mask);
155 }
156
157 static void inic_reset_port(void __iomem *port_base)
158 {
159 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
160 u16 ctl;
161
162 ctl = readw(idma_ctl);
163 ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
164
165 /* mask IRQ and assert reset */
166 writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
167 readw(idma_ctl); /* flush */
168
169 /* give it some time */
170 msleep(1);
171
172 /* release reset */
173 writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
174
175 /* clear irq */
176 writeb(0xff, port_base + PORT_IRQ_STAT);
177
178 /* reenable ATA IRQ, turn off IDMA mode */
179 writew(ctl, idma_ctl);
180 }
181
182 static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
183 {
184 void __iomem *scr_addr = ap->ioaddr.scr_addr;
185 void __iomem *addr;
186
187 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
188 return -EINVAL;
189
190 addr = scr_addr + scr_map[sc_reg] * 4;
191 *val = readl(scr_addr + scr_map[sc_reg] * 4);
192
193 /* this controller has stuck DIAG.N, ignore it */
194 if (sc_reg == SCR_ERROR)
195 *val &= ~SERR_PHYRDY_CHG;
196 return 0;
197 }
198
199 static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
200 {
201 void __iomem *scr_addr = ap->ioaddr.scr_addr;
202 void __iomem *addr;
203
204 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
205 return -EINVAL;
206
207 addr = scr_addr + scr_map[sc_reg] * 4;
208 writel(val, scr_addr + scr_map[sc_reg] * 4);
209 return 0;
210 }
211
212 /*
213 * In TF mode, inic162x is very similar to SFF device. TF registers
214 * function the same. DMA engine behaves similary using the same PRD
215 * format as BMDMA but different command register, interrupt and event
216 * notification methods are used. The following inic_bmdma_*()
217 * functions do the impedance matching.
218 */
219 static void inic_bmdma_setup(struct ata_queued_cmd *qc)
220 {
221 struct ata_port *ap = qc->ap;
222 struct inic_port_priv *pp = ap->private_data;
223 void __iomem *port_base = inic_port_base(ap);
224 int rw = qc->tf.flags & ATA_TFLAG_WRITE;
225
226 /* make sure device sees PRD table writes */
227 wmb();
228
229 /* load transfer length */
230 writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
231
232 /* turn on DMA and specify data direction */
233 pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
234 if (!rw)
235 pp->cached_prdctl |= PRD_CTL_WR;
236 writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
237
238 /* issue r/w command */
239 ap->ops->exec_command(ap, &qc->tf);
240 }
241
242 static void inic_bmdma_start(struct ata_queued_cmd *qc)
243 {
244 struct ata_port *ap = qc->ap;
245 struct inic_port_priv *pp = ap->private_data;
246 void __iomem *port_base = inic_port_base(ap);
247
248 /* start host DMA transaction */
249 pp->cached_prdctl |= PRD_CTL_START;
250 writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
251 }
252
253 static void inic_bmdma_stop(struct ata_queued_cmd *qc)
254 {
255 struct ata_port *ap = qc->ap;
256 struct inic_port_priv *pp = ap->private_data;
257 void __iomem *port_base = inic_port_base(ap);
258
259 /* stop DMA engine */
260 writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
261 }
262
263 static u8 inic_bmdma_status(struct ata_port *ap)
264 {
265 /* event is already verified by the interrupt handler */
266 return ATA_DMA_INTR;
267 }
268
269 static void inic_irq_clear(struct ata_port *ap)
270 {
271 /* noop */
272 }
273
274 static void inic_host_intr(struct ata_port *ap)
275 {
276 void __iomem *port_base = inic_port_base(ap);
277 struct ata_eh_info *ehi = &ap->link.eh_info;
278 u8 irq_stat;
279
280 /* fetch and clear irq */
281 irq_stat = readb(port_base + PORT_IRQ_STAT);
282 writeb(irq_stat, port_base + PORT_IRQ_STAT);
283
284 if (likely(!(irq_stat & PIRQ_ERR))) {
285 struct ata_queued_cmd *qc =
286 ata_qc_from_tag(ap, ap->link.active_tag);
287
288 if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
289 ata_chk_status(ap); /* clear ATA interrupt */
290 return;
291 }
292
293 if (likely(ata_host_intr(ap, qc)))
294 return;
295
296 ata_chk_status(ap); /* clear ATA interrupt */
297 ata_port_printk(ap, KERN_WARNING, "unhandled "
298 "interrupt, irq_stat=%x\n", irq_stat);
299 return;
300 }
301
302 /* error */
303 ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
304
305 if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
306 ata_ehi_hotplugged(ehi);
307 ata_port_freeze(ap);
308 } else
309 ata_port_abort(ap);
310 }
311
312 static irqreturn_t inic_interrupt(int irq, void *dev_instance)
313 {
314 struct ata_host *host = dev_instance;
315 void __iomem *mmio_base = host->iomap[MMIO_BAR];
316 u16 host_irq_stat;
317 int i, handled = 0;;
318
319 host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
320
321 if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
322 goto out;
323
324 spin_lock(&host->lock);
325
326 for (i = 0; i < NR_PORTS; i++) {
327 struct ata_port *ap = host->ports[i];
328
329 if (!(host_irq_stat & (HIRQ_PORT0 << i)))
330 continue;
331
332 if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
333 inic_host_intr(ap);
334 handled++;
335 } else {
336 if (ata_ratelimit())
337 dev_printk(KERN_ERR, host->dev, "interrupt "
338 "from disabled port %d (0x%x)\n",
339 i, host_irq_stat);
340 }
341 }
342
343 spin_unlock(&host->lock);
344
345 out:
346 return IRQ_RETVAL(handled);
347 }
348
349 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
350 {
351 struct ata_port *ap = qc->ap;
352
353 /* ATA IRQ doesn't wait for DMA transfer completion and vice
354 * versa. Mask IRQ selectively to detect command completion.
355 * Without it, ATA DMA read command can cause data corruption.
356 *
357 * Something similar might be needed for ATAPI writes. I
358 * tried a lot of combinations but couldn't find the solution.
359 */
360 if (qc->tf.protocol == ATA_PROT_DMA &&
361 !(qc->tf.flags & ATA_TFLAG_WRITE))
362 inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
363 else
364 inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
365
366 /* Issuing a command to yet uninitialized port locks up the
367 * controller. Most of the time, this happens for the first
368 * command after reset which are ATA and ATAPI IDENTIFYs.
369 * Fast fail if stat is 0x7f or 0xff for those commands.
370 */
371 if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
372 qc->tf.command == ATA_CMD_ID_ATAPI)) {
373 u8 stat = ata_chk_status(ap);
374 if (stat == 0x7f || stat == 0xff)
375 return AC_ERR_HSM;
376 }
377
378 return ata_qc_issue_prot(qc);
379 }
380
381 static void inic_freeze(struct ata_port *ap)
382 {
383 void __iomem *port_base = inic_port_base(ap);
384
385 __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
386
387 ata_chk_status(ap);
388 writeb(0xff, port_base + PORT_IRQ_STAT);
389
390 readb(port_base + PORT_IRQ_STAT); /* flush */
391 }
392
393 static void inic_thaw(struct ata_port *ap)
394 {
395 void __iomem *port_base = inic_port_base(ap);
396
397 ata_chk_status(ap);
398 writeb(0xff, port_base + PORT_IRQ_STAT);
399
400 __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
401
402 readb(port_base + PORT_IRQ_STAT); /* flush */
403 }
404
405 /*
406 * SRST and SControl hardreset don't give valid signature on this
407 * controller. Only controller specific hardreset mechanism works.
408 */
409 static int inic_hardreset(struct ata_link *link, unsigned int *class,
410 unsigned long deadline)
411 {
412 struct ata_port *ap = link->ap;
413 void __iomem *port_base = inic_port_base(ap);
414 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
415 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
416 u16 val;
417 int rc;
418
419 /* hammer it into sane state */
420 inic_reset_port(port_base);
421
422 val = readw(idma_ctl);
423 writew(val | IDMA_CTL_RST_ATA, idma_ctl);
424 readw(idma_ctl); /* flush */
425 msleep(1);
426 writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
427
428 rc = sata_link_resume(link, timing, deadline);
429 if (rc) {
430 ata_link_printk(link, KERN_WARNING, "failed to resume "
431 "link after reset (errno=%d)\n", rc);
432 return rc;
433 }
434
435 *class = ATA_DEV_NONE;
436 if (ata_link_online(link)) {
437 struct ata_taskfile tf;
438
439 /* wait a while before checking status */
440 ata_wait_after_reset(ap, deadline);
441
442 rc = ata_wait_ready(ap, deadline);
443 /* link occupied, -ENODEV too is an error */
444 if (rc) {
445 ata_link_printk(link, KERN_WARNING, "device not ready "
446 "after hardreset (errno=%d)\n", rc);
447 return rc;
448 }
449
450 ata_tf_read(ap, &tf);
451 *class = ata_dev_classify(&tf);
452 if (*class == ATA_DEV_UNKNOWN)
453 *class = ATA_DEV_NONE;
454 }
455
456 return 0;
457 }
458
459 static void inic_error_handler(struct ata_port *ap)
460 {
461 void __iomem *port_base = inic_port_base(ap);
462 struct inic_port_priv *pp = ap->private_data;
463 unsigned long flags;
464
465 /* reset PIO HSM and stop DMA engine */
466 inic_reset_port(port_base);
467
468 spin_lock_irqsave(ap->lock, flags);
469 ap->hsm_task_state = HSM_ST_IDLE;
470 writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
471 spin_unlock_irqrestore(ap->lock, flags);
472
473 /* PIO and DMA engines have been stopped, perform recovery */
474 ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
475 ata_std_postreset);
476 }
477
478 static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
479 {
480 /* make DMA engine forget about the failed command */
481 if (qc->flags & ATA_QCFLAG_FAILED)
482 inic_reset_port(inic_port_base(qc->ap));
483 }
484
485 static void inic_dev_config(struct ata_device *dev)
486 {
487 /* inic can only handle upto LBA28 max sectors */
488 if (dev->max_sectors > ATA_MAX_SECTORS)
489 dev->max_sectors = ATA_MAX_SECTORS;
490
491 if (dev->n_sectors >= 1 << 28) {
492 ata_dev_printk(dev, KERN_ERR,
493 "ERROR: This driver doesn't support LBA48 yet and may cause\n"
494 " data corruption on such devices. Disabling.\n");
495 ata_dev_disable(dev);
496 }
497 }
498
499 static void init_port(struct ata_port *ap)
500 {
501 void __iomem *port_base = inic_port_base(ap);
502
503 /* Setup PRD address */
504 writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
505 }
506
507 static int inic_port_resume(struct ata_port *ap)
508 {
509 init_port(ap);
510 return 0;
511 }
512
513 static int inic_port_start(struct ata_port *ap)
514 {
515 void __iomem *port_base = inic_port_base(ap);
516 struct inic_port_priv *pp;
517 u8 tmp;
518 int rc;
519
520 /* alloc and initialize private data */
521 pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
522 if (!pp)
523 return -ENOMEM;
524 ap->private_data = pp;
525
526 /* default PRD_CTL value, DMAEN, WR and START off */
527 tmp = readb(port_base + PORT_PRD_CTL);
528 tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
529 pp->dfl_prdctl = tmp;
530
531 /* Alloc resources */
532 rc = ata_port_start(ap);
533 if (rc) {
534 kfree(pp);
535 return rc;
536 }
537
538 init_port(ap);
539
540 return 0;
541 }
542
543 static struct ata_port_operations inic_port_ops = {
544 .tf_load = ata_tf_load,
545 .tf_read = ata_tf_read,
546 .check_status = ata_check_status,
547 .exec_command = ata_exec_command,
548 .dev_select = ata_std_dev_select,
549
550 .scr_read = inic_scr_read,
551 .scr_write = inic_scr_write,
552
553 .bmdma_setup = inic_bmdma_setup,
554 .bmdma_start = inic_bmdma_start,
555 .bmdma_stop = inic_bmdma_stop,
556 .bmdma_status = inic_bmdma_status,
557
558 .irq_clear = inic_irq_clear,
559 .irq_on = ata_irq_on,
560
561 .qc_prep = ata_qc_prep,
562 .qc_issue = inic_qc_issue,
563 .data_xfer = ata_data_xfer,
564
565 .freeze = inic_freeze,
566 .thaw = inic_thaw,
567 .error_handler = inic_error_handler,
568 .post_internal_cmd = inic_post_internal_cmd,
569 .dev_config = inic_dev_config,
570
571 .port_resume = inic_port_resume,
572
573 .port_start = inic_port_start,
574 };
575
576 static struct ata_port_info inic_port_info = {
577 /* For some reason, ATAPI_PROT_PIO is broken on this
578 * controller, and no, PIO_POLLING does't fix it. It somehow
579 * manages to report the wrong ireason and ignoring ireason
580 * results in machine lock up. Tell libata to always prefer
581 * DMA.
582 */
583 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
584 .pio_mask = 0x1f, /* pio0-4 */
585 .mwdma_mask = 0x07, /* mwdma0-2 */
586 .udma_mask = ATA_UDMA6,
587 .port_ops = &inic_port_ops
588 };
589
590 static int init_controller(void __iomem *mmio_base, u16 hctl)
591 {
592 int i;
593 u16 val;
594
595 hctl &= ~HCTL_KNOWN_BITS;
596
597 /* Soft reset whole controller. Spec says reset duration is 3
598 * PCI clocks, be generous and give it 10ms.
599 */
600 writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
601 readw(mmio_base + HOST_CTL); /* flush */
602
603 for (i = 0; i < 10; i++) {
604 msleep(1);
605 val = readw(mmio_base + HOST_CTL);
606 if (!(val & HCTL_SOFTRST))
607 break;
608 }
609
610 if (val & HCTL_SOFTRST)
611 return -EIO;
612
613 /* mask all interrupts and reset ports */
614 for (i = 0; i < NR_PORTS; i++) {
615 void __iomem *port_base = mmio_base + i * PORT_SIZE;
616
617 writeb(0xff, port_base + PORT_IRQ_MASK);
618 inic_reset_port(port_base);
619 }
620
621 /* port IRQ is masked now, unmask global IRQ */
622 writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
623 val = readw(mmio_base + HOST_IRQ_MASK);
624 val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
625 writew(val, mmio_base + HOST_IRQ_MASK);
626
627 return 0;
628 }
629
630 #ifdef CONFIG_PM
631 static int inic_pci_device_resume(struct pci_dev *pdev)
632 {
633 struct ata_host *host = dev_get_drvdata(&pdev->dev);
634 struct inic_host_priv *hpriv = host->private_data;
635 void __iomem *mmio_base = host->iomap[MMIO_BAR];
636 int rc;
637
638 rc = ata_pci_device_do_resume(pdev);
639 if (rc)
640 return rc;
641
642 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
643 rc = init_controller(mmio_base, hpriv->cached_hctl);
644 if (rc)
645 return rc;
646 }
647
648 ata_host_resume(host);
649
650 return 0;
651 }
652 #endif
653
654 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
655 {
656 static int printed_version;
657 const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
658 struct ata_host *host;
659 struct inic_host_priv *hpriv;
660 void __iomem * const *iomap;
661 int i, rc;
662
663 if (!printed_version++)
664 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
665
666 /* alloc host */
667 host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
668 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
669 if (!host || !hpriv)
670 return -ENOMEM;
671
672 host->private_data = hpriv;
673
674 /* acquire resources and fill host */
675 rc = pcim_enable_device(pdev);
676 if (rc)
677 return rc;
678
679 rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
680 if (rc)
681 return rc;
682 host->iomap = iomap = pcim_iomap_table(pdev);
683
684 for (i = 0; i < NR_PORTS; i++) {
685 struct ata_port *ap = host->ports[i];
686 struct ata_ioports *port = &ap->ioaddr;
687 unsigned int offset = i * PORT_SIZE;
688
689 port->cmd_addr = iomap[2 * i];
690 port->altstatus_addr =
691 port->ctl_addr = (void __iomem *)
692 ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
693 port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
694
695 ata_std_ports(port);
696
697 ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
698 ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
699 ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
700 (unsigned long long)pci_resource_start(pdev, 2 * i),
701 (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
702 ATA_PCI_CTL_OFS);
703 }
704
705 hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
706
707 /* Set dma_mask. This devices doesn't support 64bit addressing. */
708 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
709 if (rc) {
710 dev_printk(KERN_ERR, &pdev->dev,
711 "32-bit DMA enable failed\n");
712 return rc;
713 }
714
715 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
716 if (rc) {
717 dev_printk(KERN_ERR, &pdev->dev,
718 "32-bit consistent DMA enable failed\n");
719 return rc;
720 }
721
722 /*
723 * This controller is braindamaged. dma_boundary is 0xffff
724 * like others but it will lock up the whole machine HARD if
725 * 65536 byte PRD entry is fed. Reduce maximum segment size.
726 */
727 rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
728 if (rc) {
729 dev_printk(KERN_ERR, &pdev->dev,
730 "failed to set the maximum segment size.\n");
731 return rc;
732 }
733
734 rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
735 if (rc) {
736 dev_printk(KERN_ERR, &pdev->dev,
737 "failed to initialize controller\n");
738 return rc;
739 }
740
741 pci_set_master(pdev);
742 return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
743 &inic_sht);
744 }
745
746 static const struct pci_device_id inic_pci_tbl[] = {
747 { PCI_VDEVICE(INIT, 0x1622), },
748 { },
749 };
750
751 static struct pci_driver inic_pci_driver = {
752 .name = DRV_NAME,
753 .id_table = inic_pci_tbl,
754 #ifdef CONFIG_PM
755 .suspend = ata_pci_device_suspend,
756 .resume = inic_pci_device_resume,
757 #endif
758 .probe = inic_init_one,
759 .remove = ata_pci_remove_one,
760 };
761
762 static int __init inic_init(void)
763 {
764 return pci_register_driver(&inic_pci_driver);
765 }
766
767 static void __exit inic_exit(void)
768 {
769 pci_unregister_driver(&inic_pci_driver);
770 }
771
772 MODULE_AUTHOR("Tejun Heo");
773 MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
774 MODULE_LICENSE("GPL v2");
775 MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
776 MODULE_VERSION(DRV_VERSION);
777
778 module_init(inic_init);
779 module_exit(inic_exit);
Support for the Chinese Samsung S3C2440 based development boards