2 * tc35815.c: A TOSHIBA TC35815CF PCI 10/100Mbps ethernet driver for linux.
4 * Based on skelton.c by Donald Becker.
6 * This driver is a replacement of older and less maintained version.
7 * This is a header of the older version:
9 * Copyright 2001 MontaVista Software Inc.
10 * Author: MontaVista Software, Inc.
11 * ahennessy@mvista.com
12 * Copyright (C) 2000-2001 Toshiba Corporation
13 * static const char *version =
14 * "tc35815.c:v0.00 26/07/2000 by Toshiba Corporation\n";
17 * This file is subject to the terms and conditions of the GNU General Public
18 * License. See the file "COPYING" in the main directory of this archive
21 * (C) Copyright TOSHIBA CORPORATION 2004-2005
22 * All Rights Reserved.
26 #define DRV_VERSION "1.36-NAPI"
28 #define DRV_VERSION "1.36"
30 static const char *version
= "tc35815.c:v" DRV_VERSION
"\n";
31 #define MODNAME "tc35815"
33 #include <linux/module.h>
34 #include <linux/kernel.h>
35 #include <linux/types.h>
36 #include <linux/fcntl.h>
37 #include <linux/interrupt.h>
38 #include <linux/ioport.h>
40 #include <linux/slab.h>
41 #include <linux/string.h>
42 #include <linux/spinlock.h>
43 #include <linux/errno.h>
44 #include <linux/init.h>
45 #include <linux/netdevice.h>
46 #include <linux/etherdevice.h>
47 #include <linux/skbuff.h>
48 #include <linux/delay.h>
49 #include <linux/pci.h>
50 #include <linux/mii.h>
51 #include <linux/ethtool.h>
52 #include <linux/platform_device.h>
54 #include <asm/byteorder.h>
56 /* First, a few definitions that the brave might change. */
58 #define GATHER_TXINT /* On-Demand Tx Interrupt */
59 #define WORKAROUND_LOSTCAR
60 #define WORKAROUND_100HALF_PROMISC
61 /* #define TC35815_USE_PACKEDBUFFER */
69 /* indexed by board_t, above */
72 } board_info
[] __devinitdata
= {
73 { "TOSHIBA TC35815CF 10/100BaseTX" },
74 { "TOSHIBA TC35815 with Wake on LAN" },
75 { "TOSHIBA TC35815/TX4939" },
78 static const struct pci_device_id tc35815_pci_tbl
[] = {
79 {PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_TC35815CF
), .driver_data
= TC35815CF
},
80 {PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_TC35815_NWU
), .driver_data
= TC35815_NWU
},
81 {PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939
), .driver_data
= TC35815_TX4939
},
84 MODULE_DEVICE_TABLE (pci
, tc35815_pci_tbl
);
86 /* see MODULE_PARM_DESC */
87 static struct tc35815_options
{
97 volatile __u32 DMA_Ctl
; /* 0x00 */
98 volatile __u32 TxFrmPtr
;
99 volatile __u32 TxThrsh
;
100 volatile __u32 TxPollCtr
;
101 volatile __u32 BLFrmPtr
;
102 volatile __u32 RxFragSize
;
103 volatile __u32 Int_En
;
104 volatile __u32 FDA_Bas
;
105 volatile __u32 FDA_Lim
; /* 0x20 */
106 volatile __u32 Int_Src
;
107 volatile __u32 unused0
[2];
108 volatile __u32 PauseCnt
;
109 volatile __u32 RemPauCnt
;
110 volatile __u32 TxCtlFrmStat
;
111 volatile __u32 unused1
;
112 volatile __u32 MAC_Ctl
; /* 0x40 */
113 volatile __u32 CAM_Ctl
;
114 volatile __u32 Tx_Ctl
;
115 volatile __u32 Tx_Stat
;
116 volatile __u32 Rx_Ctl
;
117 volatile __u32 Rx_Stat
;
118 volatile __u32 MD_Data
;
119 volatile __u32 MD_CA
;
120 volatile __u32 CAM_Adr
; /* 0x60 */
121 volatile __u32 CAM_Data
;
122 volatile __u32 CAM_Ena
;
123 volatile __u32 PROM_Ctl
;
124 volatile __u32 PROM_Data
;
125 volatile __u32 Algn_Cnt
;
126 volatile __u32 CRC_Cnt
;
127 volatile __u32 Miss_Cnt
;
133 /* DMA_Ctl bit asign ------------------------------------------------------- */
134 #define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
135 #define DMA_RxAlign_1 0x00400000
136 #define DMA_RxAlign_2 0x00800000
137 #define DMA_RxAlign_3 0x00c00000
138 #define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
139 #define DMA_IntMask 0x00040000 /* 1:Interupt mask */
140 #define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
141 #define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
142 #define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
143 #define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */
144 #define DMA_TestMode 0x00002000 /* 1:Test Mode */
145 #define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
146 #define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
148 /* RxFragSize bit asign ---------------------------------------------------- */
149 #define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
150 #define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
152 /* MAC_Ctl bit asign ------------------------------------------------------- */
153 #define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
154 #define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
155 #define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
156 #define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */
157 #define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */
158 #define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/
159 #define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */
160 #define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */
161 #define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */
162 #define MAC_Reset 0x00000004 /* 1:Software Reset */
163 #define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
164 #define MAC_HaltReq 0x00000001 /* 1:Halt request */
166 /* PROM_Ctl bit asign ------------------------------------------------------ */
167 #define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
168 #define PROM_Read 0x00004000 /*10:Read operation */
169 #define PROM_Write 0x00002000 /*01:Write operation */
170 #define PROM_Erase 0x00006000 /*11:Erase operation */
171 /*00:Enable or Disable Writting, */
172 /* as specified in PROM_Addr. */
173 #define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
176 /* CAM_Ctl bit asign ------------------------------------------------------- */
177 #define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
178 #define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
180 #define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */
181 #define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
182 #define CAM_StationAcc 0x00000001 /* 1:unicast accept */
184 /* CAM_Ena bit asign ------------------------------------------------------- */
185 #define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
186 #define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */
187 #define CAM_Ena_Bit(index) (1<<(index))
188 #define CAM_ENTRY_DESTINATION 0
189 #define CAM_ENTRY_SOURCE 1
190 #define CAM_ENTRY_MACCTL 20
192 /* Tx_Ctl bit asign -------------------------------------------------------- */
193 #define Tx_En 0x00000001 /* 1:Transmit enable */
194 #define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
195 #define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
196 #define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */
197 #define Tx_FBack 0x00000010 /* 1:Fast Back-off */
198 #define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */
199 #define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */
200 #define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */
201 #define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */
202 #define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */
203 #define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
204 #define Tx_EnComp 0x00004000 /* 1:Enable Completion */
206 /* Tx_Stat bit asign ------------------------------------------------------- */
207 #define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
208 #define Tx_ExColl 0x00000010 /* Excessive Collision */
209 #define Tx_TXDefer 0x00000020 /* Transmit Defered */
210 #define Tx_Paused 0x00000040 /* Transmit Paused */
211 #define Tx_IntTx 0x00000080 /* Interrupt on Tx */
212 #define Tx_Under 0x00000100 /* Underrun */
213 #define Tx_Defer 0x00000200 /* Deferral */
214 #define Tx_NCarr 0x00000400 /* No Carrier */
215 #define Tx_10Stat 0x00000800 /* 10Mbps Status */
216 #define Tx_LateColl 0x00001000 /* Late Collision */
217 #define Tx_TxPar 0x00002000 /* Tx Parity Error */
218 #define Tx_Comp 0x00004000 /* Completion */
219 #define Tx_Halted 0x00008000 /* Tx Halted */
220 #define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
222 /* Rx_Ctl bit asign -------------------------------------------------------- */
223 #define Rx_EnGood 0x00004000 /* 1:Enable Good */
224 #define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
225 #define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
226 #define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */
227 #define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */
228 #define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */
229 #define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */
230 #define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */
231 #define Rx_ShortEn 0x00000008 /* 1:Short Enable */
232 #define Rx_LongEn 0x00000004 /* 1:Long Enable */
233 #define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
234 #define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
236 /* Rx_Stat bit asign ------------------------------------------------------- */
237 #define Rx_Halted 0x00008000 /* Rx Halted */
238 #define Rx_Good 0x00004000 /* Rx Good */
239 #define Rx_RxPar 0x00002000 /* Rx Parity Error */
240 /* 0x00001000 not use */
241 #define Rx_LongErr 0x00000800 /* Rx Long Error */
242 #define Rx_Over 0x00000400 /* Rx Overflow */
243 #define Rx_CRCErr 0x00000200 /* Rx CRC Error */
244 #define Rx_Align 0x00000100 /* Rx Alignment Error */
245 #define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */
246 #define Rx_IntRx 0x00000040 /* Rx Interrupt */
247 #define Rx_CtlRecd 0x00000020 /* Rx Control Receive */
249 #define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */
251 /* Int_En bit asign -------------------------------------------------------- */
252 #define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
253 #define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Control Complete Enable */
254 #define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
255 #define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */
256 #define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */
257 #define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */
258 #define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */
259 #define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */
260 #define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */
261 #define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */
262 #define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */
263 #define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
264 /* Exhausted Enable */
266 /* Int_Src bit asign ------------------------------------------------------- */
267 #define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
268 #define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
269 #define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
270 #define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */
271 #define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */
272 #define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */
273 #define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */
274 #define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */
275 #define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */
276 #define Int_SWInt 0x00000020 /* 1:Software request & Clear */
277 #define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */
278 #define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */
279 #define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */
280 #define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
281 #define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
283 /* MD_CA bit asign --------------------------------------------------------- */
284 #define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
285 #define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
286 #define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
293 /* Frame descripter */
295 volatile __u32 FDNext
;
296 volatile __u32 FDSystem
;
297 volatile __u32 FDStat
;
298 volatile __u32 FDCtl
;
301 /* Buffer descripter */
303 volatile __u32 BuffData
;
304 volatile __u32 BDCtl
;
309 /* Frame Descripter bit asign ---------------------------------------------- */
310 #define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
311 #define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
312 #define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
313 #define FD_FrmOpt_BigEndian 0x40000000 /* Tx/Rx */
314 #define FD_FrmOpt_IntTx 0x20000000 /* Tx only */
315 #define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */
316 #define FD_FrmOpt_NoPadding 0x08000000 /* Tx only */
317 #define FD_FrmOpt_Packing 0x04000000 /* Rx only */
318 #define FD_CownsFD 0x80000000 /* FD Controller owner bit */
319 #define FD_Next_EOL 0x00000001 /* FD EOL indicator */
320 #define FD_BDCnt_SHIFT 16
322 /* Buffer Descripter bit asign --------------------------------------------- */
323 #define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
324 #define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
325 #define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
326 #define BD_CownsBD 0x80000000 /* BD Controller owner bit */
327 #define BD_RxBDID_SHIFT 16
328 #define BD_RxBDSeqN_SHIFT 24
331 /* Some useful constants. */
332 #undef NO_CHECK_CARRIER /* Does not check No-Carrier with TP */
334 #ifdef NO_CHECK_CARRIER
335 #define TX_CTL_CMD (Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
336 Tx_EnExColl | Tx_EnExDefer | Tx_EnUnder | \
337 Tx_En) /* maybe 0x7b01 */
339 #define TX_CTL_CMD (Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
340 Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \
341 Tx_En) /* maybe 0x7b01 */
343 #define RX_CTL_CMD (Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \
344 | Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */
345 #define INT_EN_CMD (Int_NRAbtEn | \
346 Int_DmParErrEn | Int_DParDEn | Int_DParErrEn | \
347 Int_SSysErrEn | Int_RMasAbtEn | Int_RTargAbtEn | \
349 Int_BLExEn | Int_FDAExEn) /* maybe 0xb7f*/
350 #define DMA_CTL_CMD DMA_BURST_SIZE
351 #define HAVE_DMA_RXALIGN(lp) likely((lp)->boardtype != TC35815CF)
353 /* Tuning parameters */
354 #define DMA_BURST_SIZE 32
355 #define TX_THRESHOLD 1024
356 #define TX_THRESHOLD_MAX 1536 /* used threshold with packet max byte for low pci transfer ability.*/
357 #define TX_THRESHOLD_KEEP_LIMIT 10 /* setting threshold max value when overrun error occured this count. */
359 /* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
360 #ifdef TC35815_USE_PACKEDBUFFER
361 #define FD_PAGE_NUM 2
362 #define RX_BUF_NUM 8 /* >= 2 */
363 #define RX_FD_NUM 250 /* >= 32 */
364 #define TX_FD_NUM 128
365 #define RX_BUF_SIZE PAGE_SIZE
366 #else /* TC35815_USE_PACKEDBUFFER */
367 #define FD_PAGE_NUM 4
368 #define RX_BUF_NUM 128 /* < 256 */
369 #define RX_FD_NUM 256 /* >= 32 */
370 #define TX_FD_NUM 128
371 #if RX_CTL_CMD & Rx_LongEn
372 #define RX_BUF_SIZE PAGE_SIZE
373 #elif RX_CTL_CMD & Rx_StripCRC
374 #define RX_BUF_SIZE ALIGN(ETH_FRAME_LEN + 4 + 2, 32) /* +2: reserve */
376 #define RX_BUF_SIZE ALIGN(ETH_FRAME_LEN + 2, 32) /* +2: reserve */
378 #endif /* TC35815_USE_PACKEDBUFFER */
379 #define RX_FD_RESERVE (2 / 2) /* max 2 BD per RxFD */
380 #define NAPI_WEIGHT 16
390 struct BDesc bd
[0]; /* variable length */
395 struct BDesc bd
[RX_BUF_NUM
];
399 #define tc_readl(addr) readl(addr)
400 #define tc_writel(d, addr) writel(d, addr)
402 #define TC35815_TX_TIMEOUT msecs_to_jiffies(400)
404 /* Timer state engine. */
405 enum tc35815_timer_state
{
406 arbwait
= 0, /* Waiting for auto negotiation to complete. */
407 lupwait
= 1, /* Auto-neg complete, awaiting link-up status. */
408 ltrywait
= 2, /* Forcing try of all modes, from fastest to slowest. */
409 asleep
= 3, /* Time inactive. */
410 lcheck
= 4, /* Check link status. */
413 /* Information that need to be kept for each board. */
414 struct tc35815_local
{
415 struct pci_dev
*pci_dev
;
417 struct net_device
*dev
;
418 struct napi_struct napi
;
421 struct net_device_stats stats
;
429 /* Tx control lock. This protects the transmit buffer ring
430 * state along with the "tx full" state of the driver. This
431 * means all netif_queue flow control actions are protected
432 * by this lock as well.
438 unsigned short saved_lpa
;
439 struct timer_list timer
;
440 enum tc35815_timer_state timer_state
; /* State of auto-neg timer. */
441 unsigned int timer_ticks
; /* Number of clicks at each state */
444 * Transmitting: Batch Mode.
446 * Receiving: Packing Mode. (TC35815_USE_PACKEDBUFFER)
447 * 1 circular FD for Free Buffer List.
448 * RX_BUF_NUM BD in Free Buffer FD.
449 * One Free Buffer BD has PAGE_SIZE data buffer.
450 * Or Non-Packing Mode.
451 * 1 circular FD for Free Buffer List.
452 * RX_BUF_NUM BD in Free Buffer FD.
453 * One Free Buffer BD has ETH_FRAME_LEN data buffer.
455 void * fd_buf
; /* for TxFD, RxFD, FrFD */
456 dma_addr_t fd_buf_dma
;
457 struct TxFD
*tfd_base
;
458 unsigned int tfd_start
;
459 unsigned int tfd_end
;
460 struct RxFD
*rfd_base
;
461 struct RxFD
*rfd_limit
;
462 struct RxFD
*rfd_cur
;
463 struct FrFD
*fbl_ptr
;
464 #ifdef TC35815_USE_PACKEDBUFFER
465 unsigned char fbl_curid
;
466 void * data_buf
[RX_BUF_NUM
]; /* packing */
467 dma_addr_t data_buf_dma
[RX_BUF_NUM
];
471 } tx_skbs
[TX_FD_NUM
];
473 unsigned int fbl_count
;
477 } tx_skbs
[TX_FD_NUM
], rx_skbs
[RX_BUF_NUM
];
479 struct mii_if_info mii
;
480 unsigned short mii_id
[2];
485 static inline dma_addr_t
fd_virt_to_bus(struct tc35815_local
*lp
, void *virt
)
487 return lp
->fd_buf_dma
+ ((u8
*)virt
- (u8
*)lp
->fd_buf
);
490 static inline void *fd_bus_to_virt(struct tc35815_local
*lp
, dma_addr_t bus
)
492 return (void *)((u8
*)lp
->fd_buf
+ (bus
- lp
->fd_buf_dma
));
495 #ifdef TC35815_USE_PACKEDBUFFER
496 static inline void *rxbuf_bus_to_virt(struct tc35815_local
*lp
, dma_addr_t bus
)
499 for (i
= 0; i
< RX_BUF_NUM
; i
++) {
500 if (bus
>= lp
->data_buf_dma
[i
] &&
501 bus
< lp
->data_buf_dma
[i
] + PAGE_SIZE
)
502 return (void *)((u8
*)lp
->data_buf
[i
] +
503 (bus
- lp
->data_buf_dma
[i
]));
508 #define TC35815_DMA_SYNC_ONDEMAND
509 static void* alloc_rxbuf_page(struct pci_dev
*hwdev
, dma_addr_t
*dma_handle
)
511 #ifdef TC35815_DMA_SYNC_ONDEMAND
513 /* pci_map + pci_dma_sync will be more effective than
514 * pci_alloc_consistent on some archs. */
515 if ((buf
= (void *)__get_free_page(GFP_ATOMIC
)) == NULL
)
517 *dma_handle
= pci_map_single(hwdev
, buf
, PAGE_SIZE
,
519 if (pci_dma_mapping_error(*dma_handle
)) {
520 free_page((unsigned long)buf
);
525 return pci_alloc_consistent(hwdev
, PAGE_SIZE
, dma_handle
);
529 static void free_rxbuf_page(struct pci_dev
*hwdev
, void *buf
, dma_addr_t dma_handle
)
531 #ifdef TC35815_DMA_SYNC_ONDEMAND
532 pci_unmap_single(hwdev
, dma_handle
, PAGE_SIZE
, PCI_DMA_FROMDEVICE
);
533 free_page((unsigned long)buf
);
535 pci_free_consistent(hwdev
, PAGE_SIZE
, buf
, dma_handle
);
538 #else /* TC35815_USE_PACKEDBUFFER */
539 static struct sk_buff
*alloc_rxbuf_skb(struct net_device
*dev
,
540 struct pci_dev
*hwdev
,
541 dma_addr_t
*dma_handle
)
544 skb
= dev_alloc_skb(RX_BUF_SIZE
);
547 *dma_handle
= pci_map_single(hwdev
, skb
->data
, RX_BUF_SIZE
,
549 if (pci_dma_mapping_error(*dma_handle
)) {
550 dev_kfree_skb_any(skb
);
553 skb_reserve(skb
, 2); /* make IP header 4byte aligned */
557 static void free_rxbuf_skb(struct pci_dev
*hwdev
, struct sk_buff
*skb
, dma_addr_t dma_handle
)
559 pci_unmap_single(hwdev
, dma_handle
, RX_BUF_SIZE
,
561 dev_kfree_skb_any(skb
);
563 #endif /* TC35815_USE_PACKEDBUFFER */
565 /* Index to functions, as function prototypes. */
567 static int tc35815_open(struct net_device
*dev
);
568 static int tc35815_send_packet(struct sk_buff
*skb
, struct net_device
*dev
);
569 static irqreturn_t
tc35815_interrupt(int irq
, void *dev_id
);
571 static int tc35815_rx(struct net_device
*dev
, int limit
);
572 static int tc35815_poll(struct napi_struct
*napi
, int budget
);
574 static void tc35815_rx(struct net_device
*dev
);
576 static void tc35815_txdone(struct net_device
*dev
);
577 static int tc35815_close(struct net_device
*dev
);
578 static struct net_device_stats
*tc35815_get_stats(struct net_device
*dev
);
579 static void tc35815_set_multicast_list(struct net_device
*dev
);
580 static void tc35815_tx_timeout(struct net_device
*dev
);
581 static int tc35815_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
);
582 #ifdef CONFIG_NET_POLL_CONTROLLER
583 static void tc35815_poll_controller(struct net_device
*dev
);
585 static const struct ethtool_ops tc35815_ethtool_ops
;
587 /* Example routines you must write ;->. */
588 static void tc35815_chip_reset(struct net_device
*dev
);
589 static void tc35815_chip_init(struct net_device
*dev
);
590 static void tc35815_find_phy(struct net_device
*dev
);
591 static void tc35815_phy_chip_init(struct net_device
*dev
);
594 static void panic_queues(struct net_device
*dev
);
597 static void tc35815_timer(unsigned long data
);
598 static void tc35815_start_auto_negotiation(struct net_device
*dev
,
599 struct ethtool_cmd
*ep
);
600 static int tc_mdio_read(struct net_device
*dev
, int phy_id
, int location
);
601 static void tc_mdio_write(struct net_device
*dev
, int phy_id
, int location
,
604 #ifdef CONFIG_CPU_TX49XX
606 * Find a platform_device providing a MAC address. The platform code
607 * should provide a "tc35815-mac" device with a MAC address in its
610 static int __devinit
tc35815_mac_match(struct device
*dev
, void *data
)
612 struct platform_device
*plat_dev
= to_platform_device(dev
);
613 struct pci_dev
*pci_dev
= data
;
614 unsigned int id
= (pci_dev
->bus
->number
<< 8) | pci_dev
->devfn
;
615 return !strcmp(plat_dev
->name
, "tc35815-mac") && plat_dev
->id
== id
;
618 static int __devinit
tc35815_read_plat_dev_addr(struct net_device
*dev
)
620 struct tc35815_local
*lp
= dev
->priv
;
621 struct device
*pd
= bus_find_device(&platform_bus_type
, NULL
,
622 lp
->pci_dev
, tc35815_mac_match
);
624 if (pd
->platform_data
)
625 memcpy(dev
->dev_addr
, pd
->platform_data
, ETH_ALEN
);
627 return is_valid_ether_addr(dev
->dev_addr
) ? 0 : -ENODEV
;
632 static int __devinit
tc35815_read_plat_dev_addr(struct net_device
*dev
)
638 static int __devinit
tc35815_init_dev_addr (struct net_device
*dev
)
640 struct tc35815_regs __iomem
*tr
=
641 (struct tc35815_regs __iomem
*)dev
->base_addr
;
644 while (tc_readl(&tr
->PROM_Ctl
) & PROM_Busy
)
646 for (i
= 0; i
< 6; i
+= 2) {
648 tc_writel(PROM_Busy
| PROM_Read
| (i
/ 2 + 2), &tr
->PROM_Ctl
);
649 while (tc_readl(&tr
->PROM_Ctl
) & PROM_Busy
)
651 data
= tc_readl(&tr
->PROM_Data
);
652 dev
->dev_addr
[i
] = data
& 0xff;
653 dev
->dev_addr
[i
+1] = data
>> 8;
655 if (!is_valid_ether_addr(dev
->dev_addr
))
656 return tc35815_read_plat_dev_addr(dev
);
660 static int __devinit
tc35815_init_one (struct pci_dev
*pdev
,
661 const struct pci_device_id
*ent
)
663 void __iomem
*ioaddr
= NULL
;
664 struct net_device
*dev
;
665 struct tc35815_local
*lp
;
667 unsigned long mmio_start
, mmio_end
, mmio_flags
, mmio_len
;
669 static int printed_version
;
670 if (!printed_version
++) {
672 dev_printk(KERN_DEBUG
, &pdev
->dev
,
673 "speed:%d duplex:%d doforce:%d\n",
674 options
.speed
, options
.duplex
, options
.doforce
);
678 dev_warn(&pdev
->dev
, "no IRQ assigned.\n");
682 /* dev zeroed in alloc_etherdev */
683 dev
= alloc_etherdev (sizeof (*lp
));
685 dev_err(&pdev
->dev
, "unable to alloc new ethernet\n");
688 SET_NETDEV_DEV(dev
, &pdev
->dev
);
692 /* enable device (incl. PCI PM wakeup), and bus-mastering */
693 rc
= pci_enable_device (pdev
);
697 mmio_start
= pci_resource_start (pdev
, 1);
698 mmio_end
= pci_resource_end (pdev
, 1);
699 mmio_flags
= pci_resource_flags (pdev
, 1);
700 mmio_len
= pci_resource_len (pdev
, 1);
702 /* set this immediately, we need to know before
703 * we talk to the chip directly */
705 /* make sure PCI base addr 1 is MMIO */
706 if (!(mmio_flags
& IORESOURCE_MEM
)) {
707 dev_err(&pdev
->dev
, "region #1 not an MMIO resource, aborting\n");
712 /* check for weird/broken PCI region reporting */
713 if ((mmio_len
< sizeof(struct tc35815_regs
))) {
714 dev_err(&pdev
->dev
, "Invalid PCI region size(s), aborting\n");
719 rc
= pci_request_regions (pdev
, MODNAME
);
723 pci_set_master (pdev
);
725 /* ioremap MMIO region */
726 ioaddr
= ioremap (mmio_start
, mmio_len
);
727 if (ioaddr
== NULL
) {
728 dev_err(&pdev
->dev
, "cannot remap MMIO, aborting\n");
730 goto err_out_free_res
;
733 /* Initialize the device structure. */
734 dev
->open
= tc35815_open
;
735 dev
->hard_start_xmit
= tc35815_send_packet
;
736 dev
->stop
= tc35815_close
;
737 dev
->get_stats
= tc35815_get_stats
;
738 dev
->set_multicast_list
= tc35815_set_multicast_list
;
739 dev
->do_ioctl
= tc35815_ioctl
;
740 dev
->ethtool_ops
= &tc35815_ethtool_ops
;
741 dev
->tx_timeout
= tc35815_tx_timeout
;
742 dev
->watchdog_timeo
= TC35815_TX_TIMEOUT
;
744 netif_napi_add(dev
, &lp
->napi
, tc35815_poll
, NAPI_WEIGHT
);
746 #ifdef CONFIG_NET_POLL_CONTROLLER
747 dev
->poll_controller
= tc35815_poll_controller
;
750 dev
->irq
= pdev
->irq
;
751 dev
->base_addr
= (unsigned long) ioaddr
;
753 spin_lock_init(&lp
->lock
);
755 lp
->boardtype
= ent
->driver_data
;
757 lp
->msg_enable
= NETIF_MSG_TX_ERR
| NETIF_MSG_HW
| NETIF_MSG_DRV
| NETIF_MSG_LINK
;
758 pci_set_drvdata(pdev
, dev
);
760 /* Soft reset the chip. */
761 tc35815_chip_reset(dev
);
763 /* Retrieve the ethernet address. */
764 if (tc35815_init_dev_addr(dev
)) {
765 dev_warn(&pdev
->dev
, "not valid ether addr\n");
766 random_ether_addr(dev
->dev_addr
);
769 rc
= register_netdev (dev
);
773 memcpy(dev
->perm_addr
, dev
->dev_addr
, dev
->addr_len
);
774 printk(KERN_INFO
"%s: %s at 0x%lx, "
775 "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
778 board_info
[ent
->driver_data
].name
,
780 dev
->dev_addr
[0], dev
->dev_addr
[1],
781 dev
->dev_addr
[2], dev
->dev_addr
[3],
782 dev
->dev_addr
[4], dev
->dev_addr
[5],
785 setup_timer(&lp
->timer
, tc35815_timer
, (unsigned long) dev
);
787 lp
->mii
.mdio_read
= tc_mdio_read
;
788 lp
->mii
.mdio_write
= tc_mdio_write
;
789 lp
->mii
.phy_id_mask
= 0x1f;
790 lp
->mii
.reg_num_mask
= 0x1f;
791 tc35815_find_phy(dev
);
792 lp
->mii
.phy_id
= lp
->phy_addr
;
793 lp
->mii
.full_duplex
= 0;
794 lp
->mii
.force_media
= 0;
801 pci_release_regions (pdev
);
808 static void __devexit
tc35815_remove_one (struct pci_dev
*pdev
)
810 struct net_device
*dev
= pci_get_drvdata (pdev
);
811 unsigned long mmio_addr
;
813 mmio_addr
= dev
->base_addr
;
815 unregister_netdev (dev
);
818 iounmap ((void __iomem
*)mmio_addr
);
819 pci_release_regions (pdev
);
824 pci_set_drvdata (pdev
, NULL
);
828 tc35815_init_queues(struct net_device
*dev
)
830 struct tc35815_local
*lp
= dev
->priv
;
832 unsigned long fd_addr
;
835 BUG_ON(sizeof(struct FDesc
) +
836 sizeof(struct BDesc
) * RX_BUF_NUM
+
837 sizeof(struct FDesc
) * RX_FD_NUM
+
838 sizeof(struct TxFD
) * TX_FD_NUM
>
839 PAGE_SIZE
* FD_PAGE_NUM
);
841 if ((lp
->fd_buf
= pci_alloc_consistent(lp
->pci_dev
, PAGE_SIZE
* FD_PAGE_NUM
, &lp
->fd_buf_dma
)) == 0)
843 for (i
= 0; i
< RX_BUF_NUM
; i
++) {
844 #ifdef TC35815_USE_PACKEDBUFFER
845 if ((lp
->data_buf
[i
] = alloc_rxbuf_page(lp
->pci_dev
, &lp
->data_buf_dma
[i
])) == NULL
) {
847 free_rxbuf_page(lp
->pci_dev
,
849 lp
->data_buf_dma
[i
]);
850 lp
->data_buf
[i
] = NULL
;
852 pci_free_consistent(lp
->pci_dev
,
853 PAGE_SIZE
* FD_PAGE_NUM
,
861 alloc_rxbuf_skb(dev
, lp
->pci_dev
,
862 &lp
->rx_skbs
[i
].skb_dma
);
863 if (!lp
->rx_skbs
[i
].skb
) {
865 free_rxbuf_skb(lp
->pci_dev
,
867 lp
->rx_skbs
[i
].skb_dma
);
868 lp
->rx_skbs
[i
].skb
= NULL
;
870 pci_free_consistent(lp
->pci_dev
,
871 PAGE_SIZE
* FD_PAGE_NUM
,
879 printk(KERN_DEBUG
"%s: FD buf %p DataBuf",
880 dev
->name
, lp
->fd_buf
);
881 #ifdef TC35815_USE_PACKEDBUFFER
883 for (i
= 0; i
< RX_BUF_NUM
; i
++)
884 printk(" %p", lp
->data_buf
[i
]);
888 for (i
= 0; i
< FD_PAGE_NUM
; i
++) {
889 clear_page((void *)((unsigned long)lp
->fd_buf
+ i
* PAGE_SIZE
));
892 fd_addr
= (unsigned long)lp
->fd_buf
;
894 /* Free Descriptors (for Receive) */
895 lp
->rfd_base
= (struct RxFD
*)fd_addr
;
896 fd_addr
+= sizeof(struct RxFD
) * RX_FD_NUM
;
897 for (i
= 0; i
< RX_FD_NUM
; i
++) {
898 lp
->rfd_base
[i
].fd
.FDCtl
= cpu_to_le32(FD_CownsFD
);
900 lp
->rfd_cur
= lp
->rfd_base
;
901 lp
->rfd_limit
= (struct RxFD
*)fd_addr
- (RX_FD_RESERVE
+ 1);
903 /* Transmit Descriptors */
904 lp
->tfd_base
= (struct TxFD
*)fd_addr
;
905 fd_addr
+= sizeof(struct TxFD
) * TX_FD_NUM
;
906 for (i
= 0; i
< TX_FD_NUM
; i
++) {
907 lp
->tfd_base
[i
].fd
.FDNext
= cpu_to_le32(fd_virt_to_bus(lp
, &lp
->tfd_base
[i
+1]));
908 lp
->tfd_base
[i
].fd
.FDSystem
= cpu_to_le32(0xffffffff);
909 lp
->tfd_base
[i
].fd
.FDCtl
= cpu_to_le32(0);
911 lp
->tfd_base
[TX_FD_NUM
-1].fd
.FDNext
= cpu_to_le32(fd_virt_to_bus(lp
, &lp
->tfd_base
[0]));
915 /* Buffer List (for Receive) */
916 lp
->fbl_ptr
= (struct FrFD
*)fd_addr
;
917 lp
->fbl_ptr
->fd
.FDNext
= cpu_to_le32(fd_virt_to_bus(lp
, lp
->fbl_ptr
));
918 lp
->fbl_ptr
->fd
.FDCtl
= cpu_to_le32(RX_BUF_NUM
| FD_CownsFD
);
919 #ifndef TC35815_USE_PACKEDBUFFER
921 * move all allocated skbs to head of rx_skbs[] array.
922 * fbl_count mighe not be RX_BUF_NUM if alloc_rxbuf_skb() in
923 * tc35815_rx() had failed.
926 for (i
= 0; i
< RX_BUF_NUM
; i
++) {
927 if (lp
->rx_skbs
[i
].skb
) {
928 if (i
!= lp
->fbl_count
) {
929 lp
->rx_skbs
[lp
->fbl_count
].skb
=
931 lp
->rx_skbs
[lp
->fbl_count
].skb_dma
=
932 lp
->rx_skbs
[i
].skb_dma
;
938 for (i
= 0; i
< RX_BUF_NUM
; i
++) {
939 #ifdef TC35815_USE_PACKEDBUFFER
940 lp
->fbl_ptr
->bd
[i
].BuffData
= cpu_to_le32(lp
->data_buf_dma
[i
]);
942 if (i
>= lp
->fbl_count
) {
943 lp
->fbl_ptr
->bd
[i
].BuffData
= 0;
944 lp
->fbl_ptr
->bd
[i
].BDCtl
= 0;
947 lp
->fbl_ptr
->bd
[i
].BuffData
=
948 cpu_to_le32(lp
->rx_skbs
[i
].skb_dma
);
950 /* BDID is index of FrFD.bd[] */
951 lp
->fbl_ptr
->bd
[i
].BDCtl
=
952 cpu_to_le32(BD_CownsBD
| (i
<< BD_RxBDID_SHIFT
) |
955 #ifdef TC35815_USE_PACKEDBUFFER
959 printk(KERN_DEBUG
"%s: TxFD %p RxFD %p FrFD %p\n",
960 dev
->name
, lp
->tfd_base
, lp
->rfd_base
, lp
->fbl_ptr
);
965 tc35815_clear_queues(struct net_device
*dev
)
967 struct tc35815_local
*lp
= dev
->priv
;
970 for (i
= 0; i
< TX_FD_NUM
; i
++) {
971 u32 fdsystem
= le32_to_cpu(lp
->tfd_base
[i
].fd
.FDSystem
);
972 struct sk_buff
*skb
=
973 fdsystem
!= 0xffffffff ?
974 lp
->tx_skbs
[fdsystem
].skb
: NULL
;
976 if (lp
->tx_skbs
[i
].skb
!= skb
) {
977 printk("%s: tx_skbs mismatch(%d).\n", dev
->name
, i
);
981 BUG_ON(lp
->tx_skbs
[i
].skb
!= skb
);
984 pci_unmap_single(lp
->pci_dev
, lp
->tx_skbs
[i
].skb_dma
, skb
->len
, PCI_DMA_TODEVICE
);
985 lp
->tx_skbs
[i
].skb
= NULL
;
986 lp
->tx_skbs
[i
].skb_dma
= 0;
987 dev_kfree_skb_any(skb
);
989 lp
->tfd_base
[i
].fd
.FDSystem
= cpu_to_le32(0xffffffff);
992 tc35815_init_queues(dev
);
996 tc35815_free_queues(struct net_device
*dev
)
998 struct tc35815_local
*lp
= dev
->priv
;
1002 for (i
= 0; i
< TX_FD_NUM
; i
++) {
1003 u32 fdsystem
= le32_to_cpu(lp
->tfd_base
[i
].fd
.FDSystem
);
1004 struct sk_buff
*skb
=
1005 fdsystem
!= 0xffffffff ?
1006 lp
->tx_skbs
[fdsystem
].skb
: NULL
;
1008 if (lp
->tx_skbs
[i
].skb
!= skb
) {
1009 printk("%s: tx_skbs mismatch(%d).\n", dev
->name
, i
);
1013 BUG_ON(lp
->tx_skbs
[i
].skb
!= skb
);
1017 pci_unmap_single(lp
->pci_dev
, lp
->tx_skbs
[i
].skb_dma
, skb
->len
, PCI_DMA_TODEVICE
);
1018 lp
->tx_skbs
[i
].skb
= NULL
;
1019 lp
->tx_skbs
[i
].skb_dma
= 0;
1021 lp
->tfd_base
[i
].fd
.FDSystem
= cpu_to_le32(0xffffffff);
1025 lp
->rfd_base
= NULL
;
1026 lp
->rfd_limit
= NULL
;
1030 for (i
= 0; i
< RX_BUF_NUM
; i
++) {
1031 #ifdef TC35815_USE_PACKEDBUFFER
1032 if (lp
->data_buf
[i
]) {
1033 free_rxbuf_page(lp
->pci_dev
,
1034 lp
->data_buf
[i
], lp
->data_buf_dma
[i
]);
1035 lp
->data_buf
[i
] = NULL
;
1038 if (lp
->rx_skbs
[i
].skb
) {
1039 free_rxbuf_skb(lp
->pci_dev
, lp
->rx_skbs
[i
].skb
,
1040 lp
->rx_skbs
[i
].skb_dma
);
1041 lp
->rx_skbs
[i
].skb
= NULL
;
1046 pci_free_consistent(lp
->pci_dev
, PAGE_SIZE
* FD_PAGE_NUM
,
1047 lp
->fd_buf
, lp
->fd_buf_dma
);
1053 dump_txfd(struct TxFD
*fd
)
1055 printk("TxFD(%p): %08x %08x %08x %08x\n", fd
,
1056 le32_to_cpu(fd
->fd
.FDNext
),
1057 le32_to_cpu(fd
->fd
.FDSystem
),
1058 le32_to_cpu(fd
->fd
.FDStat
),
1059 le32_to_cpu(fd
->fd
.FDCtl
));
1061 printk(" %08x %08x",
1062 le32_to_cpu(fd
->bd
.BuffData
),
1063 le32_to_cpu(fd
->bd
.BDCtl
));
1068 dump_rxfd(struct RxFD
*fd
)
1070 int i
, bd_count
= (le32_to_cpu(fd
->fd
.FDCtl
) & FD_BDCnt_MASK
) >> FD_BDCnt_SHIFT
;
1073 printk("RxFD(%p): %08x %08x %08x %08x\n", fd
,
1074 le32_to_cpu(fd
->fd
.FDNext
),
1075 le32_to_cpu(fd
->fd
.FDSystem
),
1076 le32_to_cpu(fd
->fd
.FDStat
),
1077 le32_to_cpu(fd
->fd
.FDCtl
));
1078 if (le32_to_cpu(fd
->fd
.FDCtl
) & FD_CownsFD
)
1081 for (i
= 0; i
< bd_count
; i
++)
1082 printk(" %08x %08x",
1083 le32_to_cpu(fd
->bd
[i
].BuffData
),
1084 le32_to_cpu(fd
->bd
[i
].BDCtl
));
1089 #if defined(DEBUG) || defined(TC35815_USE_PACKEDBUFFER)
1091 dump_frfd(struct FrFD
*fd
)
1094 printk("FrFD(%p): %08x %08x %08x %08x\n", fd
,
1095 le32_to_cpu(fd
->fd
.FDNext
),
1096 le32_to_cpu(fd
->fd
.FDSystem
),
1097 le32_to_cpu(fd
->fd
.FDStat
),
1098 le32_to_cpu(fd
->fd
.FDCtl
));
1100 for (i
= 0; i
< RX_BUF_NUM
; i
++)
1101 printk(" %08x %08x",
1102 le32_to_cpu(fd
->bd
[i
].BuffData
),
1103 le32_to_cpu(fd
->bd
[i
].BDCtl
));
1110 panic_queues(struct net_device
*dev
)
1112 struct tc35815_local
*lp
= dev
->priv
;
1115 printk("TxFD base %p, start %u, end %u\n",
1116 lp
->tfd_base
, lp
->tfd_start
, lp
->tfd_end
);
1117 printk("RxFD base %p limit %p cur %p\n",
1118 lp
->rfd_base
, lp
->rfd_limit
, lp
->rfd_cur
);
1119 printk("FrFD %p\n", lp
->fbl_ptr
);
1120 for (i
= 0; i
< TX_FD_NUM
; i
++)
1121 dump_txfd(&lp
->tfd_base
[i
]);
1122 for (i
= 0; i
< RX_FD_NUM
; i
++) {
1123 int bd_count
= dump_rxfd(&lp
->rfd_base
[i
]);
1124 i
+= (bd_count
+ 1) / 2; /* skip BDs */
1126 dump_frfd(lp
->fbl_ptr
);
1127 panic("%s: Illegal queue state.", dev
->name
);
1131 static void print_eth(char *add
)
1135 printk("print_eth(%p)\n", add
);
1136 for (i
= 0; i
< 6; i
++)
1137 printk(" %2.2X", (unsigned char) add
[i
+ 6]);
1139 for (i
= 0; i
< 6; i
++)
1140 printk(" %2.2X", (unsigned char) add
[i
]);
1141 printk(" : %2.2X%2.2X\n", (unsigned char) add
[12], (unsigned char) add
[13]);
1144 static int tc35815_tx_full(struct net_device
*dev
)
1146 struct tc35815_local
*lp
= dev
->priv
;
1147 return ((lp
->tfd_start
+ 1) % TX_FD_NUM
== lp
->tfd_end
);
1150 static void tc35815_restart(struct net_device
*dev
)
1152 struct tc35815_local
*lp
= dev
->priv
;
1153 int pid
= lp
->phy_addr
;
1154 int do_phy_reset
= 1;
1155 del_timer(&lp
->timer
); /* Kill if running */
1157 if (lp
->mii_id
[0] == 0x0016 && (lp
->mii_id
[1] & 0xfc00) == 0xf800) {
1158 /* Resetting PHY cause problem on some chip... (SEEQ 80221) */
1163 tc_mdio_write(dev
, pid
, MII_BMCR
, BMCR_RESET
);
1166 if (!(tc_mdio_read(dev
, pid
, MII_BMCR
) & BMCR_RESET
))
1171 printk(KERN_ERR
"%s: BMCR reset failed.\n", dev
->name
);
1174 tc35815_chip_reset(dev
);
1175 tc35815_clear_queues(dev
);
1176 tc35815_chip_init(dev
);
1177 /* Reconfigure CAM again since tc35815_chip_init() initialize it. */
1178 tc35815_set_multicast_list(dev
);
1181 static void tc35815_tx_timeout(struct net_device
*dev
)
1183 struct tc35815_local
*lp
= dev
->priv
;
1184 struct tc35815_regs __iomem
*tr
=
1185 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1187 printk(KERN_WARNING
"%s: transmit timed out, status %#x\n",
1188 dev
->name
, tc_readl(&tr
->Tx_Stat
));
1190 /* Try to restart the adaptor. */
1191 spin_lock_irq(&lp
->lock
);
1192 tc35815_restart(dev
);
1193 spin_unlock_irq(&lp
->lock
);
1195 lp
->stats
.tx_errors
++;
1197 /* If we have space available to accept new transmit
1198 * requests, wake up the queueing layer. This would
1199 * be the case if the chipset_init() call above just
1200 * flushes out the tx queue and empties it.
1202 * If instead, the tx queue is retained then the
1203 * netif_wake_queue() call should be placed in the
1204 * TX completion interrupt handler of the driver instead
1207 if (!tc35815_tx_full(dev
))
1208 netif_wake_queue(dev
);
1212 * Open/initialize the board. This is called (in the current kernel)
1213 * sometime after booting when the 'ifconfig' program is run.
1215 * This routine should set everything up anew at each open, even
1216 * registers that "should" only need to be set once at boot, so that
1217 * there is non-reboot way to recover if something goes wrong.
1220 tc35815_open(struct net_device
*dev
)
1222 struct tc35815_local
*lp
= dev
->priv
;
1225 * This is used if the interrupt line can turned off (shared).
1226 * See 3c503.c for an example of selecting the IRQ at config-time.
1228 if (request_irq(dev
->irq
, &tc35815_interrupt
, IRQF_SHARED
, dev
->name
, dev
)) {
1232 del_timer(&lp
->timer
); /* Kill if running */
1233 tc35815_chip_reset(dev
);
1235 if (tc35815_init_queues(dev
) != 0) {
1236 free_irq(dev
->irq
, dev
);
1241 napi_enable(&lp
->napi
);
1244 /* Reset the hardware here. Don't forget to set the station address. */
1245 spin_lock_irq(&lp
->lock
);
1246 tc35815_chip_init(dev
);
1247 spin_unlock_irq(&lp
->lock
);
1249 /* We are now ready to accept transmit requeusts from
1250 * the queueing layer of the networking.
1252 netif_start_queue(dev
);
1257 /* This will only be invoked if your driver is _not_ in XOFF state.
1258 * What this means is that you need not check it, and that this
1259 * invariant will hold if you make sure that the netif_*_queue()
1260 * calls are done at the proper times.
1262 static int tc35815_send_packet(struct sk_buff
*skb
, struct net_device
*dev
)
1264 struct tc35815_local
*lp
= dev
->priv
;
1266 unsigned long flags
;
1268 /* If some error occurs while trying to transmit this
1269 * packet, you should return '1' from this function.
1270 * In such a case you _may not_ do anything to the
1271 * SKB, it is still owned by the network queueing
1272 * layer when an error is returned. This means you
1273 * may not modify any SKB fields, you may not free
1277 /* This is the most common case for modern hardware.
1278 * The spinlock protects this code from the TX complete
1279 * hardware interrupt handler. Queue flow control is
1280 * thus managed under this lock as well.
1282 spin_lock_irqsave(&lp
->lock
, flags
);
1284 /* failsafe... (handle txdone now if half of FDs are used) */
1285 if ((lp
->tfd_start
+ TX_FD_NUM
- lp
->tfd_end
) % TX_FD_NUM
>
1287 tc35815_txdone(dev
);
1289 if (netif_msg_pktdata(lp
))
1290 print_eth(skb
->data
);
1292 if (lp
->tx_skbs
[lp
->tfd_start
].skb
) {
1293 printk("%s: tx_skbs conflict.\n", dev
->name
);
1297 BUG_ON(lp
->tx_skbs
[lp
->tfd_start
].skb
);
1299 lp
->tx_skbs
[lp
->tfd_start
].skb
= skb
;
1300 lp
->tx_skbs
[lp
->tfd_start
].skb_dma
= pci_map_single(lp
->pci_dev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
1303 txfd
= &lp
->tfd_base
[lp
->tfd_start
];
1304 txfd
->bd
.BuffData
= cpu_to_le32(lp
->tx_skbs
[lp
->tfd_start
].skb_dma
);
1305 txfd
->bd
.BDCtl
= cpu_to_le32(skb
->len
);
1306 txfd
->fd
.FDSystem
= cpu_to_le32(lp
->tfd_start
);
1307 txfd
->fd
.FDCtl
= cpu_to_le32(FD_CownsFD
| (1 << FD_BDCnt_SHIFT
));
1309 if (lp
->tfd_start
== lp
->tfd_end
) {
1310 struct tc35815_regs __iomem
*tr
=
1311 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1312 /* Start DMA Transmitter. */
1313 txfd
->fd
.FDNext
|= cpu_to_le32(FD_Next_EOL
);
1315 txfd
->fd
.FDCtl
|= cpu_to_le32(FD_FrmOpt_IntTx
);
1317 if (netif_msg_tx_queued(lp
)) {
1318 printk("%s: starting TxFD.\n", dev
->name
);
1321 tc_writel(fd_virt_to_bus(lp
, txfd
), &tr
->TxFrmPtr
);
1323 txfd
->fd
.FDNext
&= cpu_to_le32(~FD_Next_EOL
);
1324 if (netif_msg_tx_queued(lp
)) {
1325 printk("%s: queueing TxFD.\n", dev
->name
);
1329 lp
->tfd_start
= (lp
->tfd_start
+ 1) % TX_FD_NUM
;
1331 dev
->trans_start
= jiffies
;
1333 /* If we just used up the very last entry in the
1334 * TX ring on this device, tell the queueing
1335 * layer to send no more.
1337 if (tc35815_tx_full(dev
)) {
1338 if (netif_msg_tx_queued(lp
))
1339 printk(KERN_WARNING
"%s: TxFD Exhausted.\n", dev
->name
);
1340 netif_stop_queue(dev
);
1343 /* When the TX completion hw interrupt arrives, this
1344 * is when the transmit statistics are updated.
1347 spin_unlock_irqrestore(&lp
->lock
, flags
);
1351 #define FATAL_ERROR_INT \
1352 (Int_IntPCI | Int_DmParErr | Int_IntNRAbt)
1353 static void tc35815_fatal_error_interrupt(struct net_device
*dev
, u32 status
)
1356 printk(KERN_WARNING
"%s: Fatal Error Intterrupt (%#x):",
1358 if (status
& Int_IntPCI
)
1360 if (status
& Int_DmParErr
)
1361 printk(" DmParErr");
1362 if (status
& Int_IntNRAbt
)
1363 printk(" IntNRAbt");
1366 panic("%s: Too many fatal errors.", dev
->name
);
1367 printk(KERN_WARNING
"%s: Resetting ...\n", dev
->name
);
1368 /* Try to restart the adaptor. */
1369 tc35815_restart(dev
);
1373 static int tc35815_do_interrupt(struct net_device
*dev
, u32 status
, int limit
)
1375 static int tc35815_do_interrupt(struct net_device
*dev
, u32 status
)
1378 struct tc35815_local
*lp
= dev
->priv
;
1379 struct tc35815_regs __iomem
*tr
=
1380 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1383 /* Fatal errors... */
1384 if (status
& FATAL_ERROR_INT
) {
1385 tc35815_fatal_error_interrupt(dev
, status
);
1388 /* recoverable errors */
1389 if (status
& Int_IntFDAEx
) {
1390 /* disable FDAEx int. (until we make rooms...) */
1391 tc_writel(tc_readl(&tr
->Int_En
) & ~Int_FDAExEn
, &tr
->Int_En
);
1393 "%s: Free Descriptor Area Exhausted (%#x).\n",
1395 lp
->stats
.rx_dropped
++;
1398 if (status
& Int_IntBLEx
) {
1399 /* disable BLEx int. (until we make rooms...) */
1400 tc_writel(tc_readl(&tr
->Int_En
) & ~Int_BLExEn
, &tr
->Int_En
);
1402 "%s: Buffer List Exhausted (%#x).\n",
1404 lp
->stats
.rx_dropped
++;
1407 if (status
& Int_IntExBD
) {
1409 "%s: Excessive Buffer Descriptiors (%#x).\n",
1411 lp
->stats
.rx_length_errors
++;
1415 /* normal notification */
1416 if (status
& Int_IntMacRx
) {
1417 /* Got a packet(s). */
1419 ret
= tc35815_rx(dev
, limit
);
1424 lp
->lstats
.rx_ints
++;
1426 if (status
& Int_IntMacTx
) {
1427 /* Transmit complete. */
1428 lp
->lstats
.tx_ints
++;
1429 tc35815_txdone(dev
);
1430 netif_wake_queue(dev
);
1437 * The typical workload of the driver:
1438 * Handle the network interface interrupts.
1440 static irqreturn_t
tc35815_interrupt(int irq
, void *dev_id
)
1442 struct net_device
*dev
= dev_id
;
1443 struct tc35815_local
*lp
= netdev_priv(dev
);
1444 struct tc35815_regs __iomem
*tr
=
1445 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1447 u32 dmactl
= tc_readl(&tr
->DMA_Ctl
);
1449 if (!(dmactl
& DMA_IntMask
)) {
1450 /* disable interrupts */
1451 tc_writel(dmactl
| DMA_IntMask
, &tr
->DMA_Ctl
);
1452 if (netif_rx_schedule_prep(dev
, &lp
->napi
))
1453 __netif_rx_schedule(dev
, &lp
->napi
);
1455 printk(KERN_ERR
"%s: interrupt taken in poll\n",
1459 (void)tc_readl(&tr
->Int_Src
); /* flush */
1467 spin_lock(&lp
->lock
);
1468 status
= tc_readl(&tr
->Int_Src
);
1469 tc_writel(status
, &tr
->Int_Src
); /* write to clear */
1470 handled
= tc35815_do_interrupt(dev
, status
);
1471 (void)tc_readl(&tr
->Int_Src
); /* flush */
1472 spin_unlock(&lp
->lock
);
1473 return IRQ_RETVAL(handled
>= 0);
1474 #endif /* TC35815_NAPI */
1477 #ifdef CONFIG_NET_POLL_CONTROLLER
1478 static void tc35815_poll_controller(struct net_device
*dev
)
1480 disable_irq(dev
->irq
);
1481 tc35815_interrupt(dev
->irq
, dev
);
1482 enable_irq(dev
->irq
);
1486 /* We have a good packet(s), get it/them out of the buffers. */
1489 tc35815_rx(struct net_device
*dev
, int limit
)
1492 tc35815_rx(struct net_device
*dev
)
1495 struct tc35815_local
*lp
= dev
->priv
;
1498 int buf_free_count
= 0;
1499 int fd_free_count
= 0;
1504 while (!((fdctl
= le32_to_cpu(lp
->rfd_cur
->fd
.FDCtl
)) & FD_CownsFD
)) {
1505 int status
= le32_to_cpu(lp
->rfd_cur
->fd
.FDStat
);
1506 int pkt_len
= fdctl
& FD_FDLength_MASK
;
1507 int bd_count
= (fdctl
& FD_BDCnt_MASK
) >> FD_BDCnt_SHIFT
;
1509 struct RxFD
*next_rfd
;
1511 #if (RX_CTL_CMD & Rx_StripCRC) == 0
1515 if (netif_msg_rx_status(lp
))
1516 dump_rxfd(lp
->rfd_cur
);
1517 if (status
& Rx_Good
) {
1518 struct sk_buff
*skb
;
1519 unsigned char *data
;
1521 #ifdef TC35815_USE_PACKEDBUFFER
1529 #ifdef TC35815_USE_PACKEDBUFFER
1530 BUG_ON(bd_count
> 2);
1531 skb
= dev_alloc_skb(pkt_len
+ 2); /* +2: for reserve */
1533 printk(KERN_NOTICE
"%s: Memory squeeze, dropping packet.\n",
1535 lp
->stats
.rx_dropped
++;
1538 skb_reserve(skb
, 2); /* 16 bit alignment */
1540 data
= skb_put(skb
, pkt_len
);
1542 /* copy from receive buffer */
1545 while (offset
< pkt_len
&& cur_bd
< bd_count
) {
1546 int len
= le32_to_cpu(lp
->rfd_cur
->bd
[cur_bd
].BDCtl
) &
1548 dma_addr_t dma
= le32_to_cpu(lp
->rfd_cur
->bd
[cur_bd
].BuffData
);
1549 void *rxbuf
= rxbuf_bus_to_virt(lp
, dma
);
1550 if (offset
+ len
> pkt_len
)
1551 len
= pkt_len
- offset
;
1552 #ifdef TC35815_DMA_SYNC_ONDEMAND
1553 pci_dma_sync_single_for_cpu(lp
->pci_dev
,
1555 PCI_DMA_FROMDEVICE
);
1557 memcpy(data
+ offset
, rxbuf
, len
);
1558 #ifdef TC35815_DMA_SYNC_ONDEMAND
1559 pci_dma_sync_single_for_device(lp
->pci_dev
,
1561 PCI_DMA_FROMDEVICE
);
1566 #else /* TC35815_USE_PACKEDBUFFER */
1567 BUG_ON(bd_count
> 1);
1568 cur_bd
= (le32_to_cpu(lp
->rfd_cur
->bd
[0].BDCtl
)
1569 & BD_RxBDID_MASK
) >> BD_RxBDID_SHIFT
;
1571 if (cur_bd
>= RX_BUF_NUM
) {
1572 printk("%s: invalid BDID.\n", dev
->name
);
1575 BUG_ON(lp
->rx_skbs
[cur_bd
].skb_dma
!=
1576 (le32_to_cpu(lp
->rfd_cur
->bd
[0].BuffData
) & ~3));
1577 if (!lp
->rx_skbs
[cur_bd
].skb
) {
1578 printk("%s: NULL skb.\n", dev
->name
);
1582 BUG_ON(cur_bd
>= RX_BUF_NUM
);
1584 skb
= lp
->rx_skbs
[cur_bd
].skb
;
1585 prefetch(skb
->data
);
1586 lp
->rx_skbs
[cur_bd
].skb
= NULL
;
1588 pci_unmap_single(lp
->pci_dev
,
1589 lp
->rx_skbs
[cur_bd
].skb_dma
,
1590 RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
1591 if (!HAVE_DMA_RXALIGN(lp
))
1592 memmove(skb
->data
, skb
->data
- 2, pkt_len
);
1593 data
= skb_put(skb
, pkt_len
);
1594 #endif /* TC35815_USE_PACKEDBUFFER */
1595 if (netif_msg_pktdata(lp
))
1597 skb
->protocol
= eth_type_trans(skb
, dev
);
1599 netif_receive_skb(skb
);
1604 dev
->last_rx
= jiffies
;
1605 lp
->stats
.rx_packets
++;
1606 lp
->stats
.rx_bytes
+= pkt_len
;
1608 lp
->stats
.rx_errors
++;
1609 printk(KERN_DEBUG
"%s: Rx error (status %x)\n",
1610 dev
->name
, status
& Rx_Stat_Mask
);
1611 /* WORKAROUND: LongErr and CRCErr means Overflow. */
1612 if ((status
& Rx_LongErr
) && (status
& Rx_CRCErr
)) {
1613 status
&= ~(Rx_LongErr
|Rx_CRCErr
);
1616 if (status
& Rx_LongErr
) lp
->stats
.rx_length_errors
++;
1617 if (status
& Rx_Over
) lp
->stats
.rx_fifo_errors
++;
1618 if (status
& Rx_CRCErr
) lp
->stats
.rx_crc_errors
++;
1619 if (status
& Rx_Align
) lp
->stats
.rx_frame_errors
++;
1623 /* put Free Buffer back to controller */
1624 int bdctl
= le32_to_cpu(lp
->rfd_cur
->bd
[bd_count
- 1].BDCtl
);
1626 (bdctl
& BD_RxBDID_MASK
) >> BD_RxBDID_SHIFT
;
1628 if (id
>= RX_BUF_NUM
) {
1629 printk("%s: invalid BDID.\n", dev
->name
);
1633 BUG_ON(id
>= RX_BUF_NUM
);
1635 /* free old buffers */
1636 #ifdef TC35815_USE_PACKEDBUFFER
1637 while (lp
->fbl_curid
!= id
)
1639 while (lp
->fbl_count
< RX_BUF_NUM
)
1642 #ifdef TC35815_USE_PACKEDBUFFER
1643 unsigned char curid
= lp
->fbl_curid
;
1645 unsigned char curid
=
1646 (id
+ 1 + lp
->fbl_count
) % RX_BUF_NUM
;
1648 struct BDesc
*bd
= &lp
->fbl_ptr
->bd
[curid
];
1650 bdctl
= le32_to_cpu(bd
->BDCtl
);
1651 if (bdctl
& BD_CownsBD
) {
1652 printk("%s: Freeing invalid BD.\n",
1657 /* pass BD to controller */
1658 #ifndef TC35815_USE_PACKEDBUFFER
1659 if (!lp
->rx_skbs
[curid
].skb
) {
1660 lp
->rx_skbs
[curid
].skb
=
1661 alloc_rxbuf_skb(dev
,
1663 &lp
->rx_skbs
[curid
].skb_dma
);
1664 if (!lp
->rx_skbs
[curid
].skb
)
1665 break; /* try on next reception */
1666 bd
->BuffData
= cpu_to_le32(lp
->rx_skbs
[curid
].skb_dma
);
1668 #endif /* TC35815_USE_PACKEDBUFFER */
1669 /* Note: BDLength was modified by chip. */
1670 bd
->BDCtl
= cpu_to_le32(BD_CownsBD
|
1671 (curid
<< BD_RxBDID_SHIFT
) |
1673 #ifdef TC35815_USE_PACKEDBUFFER
1674 lp
->fbl_curid
= (curid
+ 1) % RX_BUF_NUM
;
1675 if (netif_msg_rx_status(lp
)) {
1676 printk("%s: Entering new FBD %d\n",
1677 dev
->name
, lp
->fbl_curid
);
1678 dump_frfd(lp
->fbl_ptr
);
1687 /* put RxFD back to controller */
1689 next_rfd
= fd_bus_to_virt(lp
,
1690 le32_to_cpu(lp
->rfd_cur
->fd
.FDNext
));
1691 if (next_rfd
< lp
->rfd_base
|| next_rfd
> lp
->rfd_limit
) {
1692 printk("%s: RxFD FDNext invalid.\n", dev
->name
);
1696 for (i
= 0; i
< (bd_count
+ 1) / 2 + 1; i
++) {
1697 /* pass FD to controller */
1699 lp
->rfd_cur
->fd
.FDNext
= cpu_to_le32(0xdeaddead);
1701 lp
->rfd_cur
->fd
.FDNext
= cpu_to_le32(FD_Next_EOL
);
1703 lp
->rfd_cur
->fd
.FDCtl
= cpu_to_le32(FD_CownsFD
);
1707 if (lp
->rfd_cur
> lp
->rfd_limit
)
1708 lp
->rfd_cur
= lp
->rfd_base
;
1710 if (lp
->rfd_cur
!= next_rfd
)
1711 printk("rfd_cur = %p, next_rfd %p\n",
1712 lp
->rfd_cur
, next_rfd
);
1716 /* re-enable BL/FDA Exhaust interrupts. */
1717 if (fd_free_count
) {
1718 struct tc35815_regs __iomem
*tr
=
1719 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1720 u32 en
, en_old
= tc_readl(&tr
->Int_En
);
1721 en
= en_old
| Int_FDAExEn
;
1725 tc_writel(en
, &tr
->Int_En
);
1733 static int tc35815_poll(struct napi_struct
*napi
, int budget
)
1735 struct tc35815_local
*lp
= container_of(napi
, struct tc35815_local
, napi
);
1736 struct net_device
*dev
= lp
->dev
;
1737 struct tc35815_regs __iomem
*tr
=
1738 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1739 int received
= 0, handled
;
1742 spin_lock(&lp
->lock
);
1743 status
= tc_readl(&tr
->Int_Src
);
1745 tc_writel(status
, &tr
->Int_Src
); /* write to clear */
1747 handled
= tc35815_do_interrupt(dev
, status
, limit
);
1749 received
+= handled
;
1750 if (received
>= budget
)
1753 status
= tc_readl(&tr
->Int_Src
);
1755 spin_unlock(&lp
->lock
);
1757 if (received
< budget
) {
1758 netif_rx_complete(dev
, napi
);
1759 /* enable interrupts */
1760 tc_writel(tc_readl(&tr
->DMA_Ctl
) & ~DMA_IntMask
, &tr
->DMA_Ctl
);
1766 #ifdef NO_CHECK_CARRIER
1767 #define TX_STA_ERR (Tx_ExColl|Tx_Under|Tx_Defer|Tx_LateColl|Tx_TxPar|Tx_SQErr)
1769 #define TX_STA_ERR (Tx_ExColl|Tx_Under|Tx_Defer|Tx_NCarr|Tx_LateColl|Tx_TxPar|Tx_SQErr)
1773 tc35815_check_tx_stat(struct net_device
*dev
, int status
)
1775 struct tc35815_local
*lp
= dev
->priv
;
1776 const char *msg
= NULL
;
1778 /* count collisions */
1779 if (status
& Tx_ExColl
)
1780 lp
->stats
.collisions
+= 16;
1781 if (status
& Tx_TxColl_MASK
)
1782 lp
->stats
.collisions
+= status
& Tx_TxColl_MASK
;
1784 #ifndef NO_CHECK_CARRIER
1785 /* TX4939 does not have NCarr */
1786 if (lp
->boardtype
== TC35815_TX4939
)
1787 status
&= ~Tx_NCarr
;
1788 #ifdef WORKAROUND_LOSTCAR
1789 /* WORKAROUND: ignore LostCrS in full duplex operation */
1790 if ((lp
->timer_state
!= asleep
&& lp
->timer_state
!= lcheck
)
1792 status
&= ~Tx_NCarr
;
1796 if (!(status
& TX_STA_ERR
)) {
1798 lp
->stats
.tx_packets
++;
1802 lp
->stats
.tx_errors
++;
1803 if (status
& Tx_ExColl
) {
1804 lp
->stats
.tx_aborted_errors
++;
1805 msg
= "Excessive Collision.";
1807 if (status
& Tx_Under
) {
1808 lp
->stats
.tx_fifo_errors
++;
1809 msg
= "Tx FIFO Underrun.";
1810 if (lp
->lstats
.tx_underrun
< TX_THRESHOLD_KEEP_LIMIT
) {
1811 lp
->lstats
.tx_underrun
++;
1812 if (lp
->lstats
.tx_underrun
>= TX_THRESHOLD_KEEP_LIMIT
) {
1813 struct tc35815_regs __iomem
*tr
=
1814 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1815 tc_writel(TX_THRESHOLD_MAX
, &tr
->TxThrsh
);
1816 msg
= "Tx FIFO Underrun.Change Tx threshold to max.";
1820 if (status
& Tx_Defer
) {
1821 lp
->stats
.tx_fifo_errors
++;
1822 msg
= "Excessive Deferral.";
1824 #ifndef NO_CHECK_CARRIER
1825 if (status
& Tx_NCarr
) {
1826 lp
->stats
.tx_carrier_errors
++;
1827 msg
= "Lost Carrier Sense.";
1830 if (status
& Tx_LateColl
) {
1831 lp
->stats
.tx_aborted_errors
++;
1832 msg
= "Late Collision.";
1834 if (status
& Tx_TxPar
) {
1835 lp
->stats
.tx_fifo_errors
++;
1836 msg
= "Transmit Parity Error.";
1838 if (status
& Tx_SQErr
) {
1839 lp
->stats
.tx_heartbeat_errors
++;
1840 msg
= "Signal Quality Error.";
1842 if (msg
&& netif_msg_tx_err(lp
))
1843 printk(KERN_WARNING
"%s: %s (%#x)\n", dev
->name
, msg
, status
);
1846 /* This handles TX complete events posted by the device
1850 tc35815_txdone(struct net_device
*dev
)
1852 struct tc35815_local
*lp
= dev
->priv
;
1856 txfd
= &lp
->tfd_base
[lp
->tfd_end
];
1857 while (lp
->tfd_start
!= lp
->tfd_end
&&
1858 !((fdctl
= le32_to_cpu(txfd
->fd
.FDCtl
)) & FD_CownsFD
)) {
1859 int status
= le32_to_cpu(txfd
->fd
.FDStat
);
1860 struct sk_buff
*skb
;
1861 unsigned long fdnext
= le32_to_cpu(txfd
->fd
.FDNext
);
1862 u32 fdsystem
= le32_to_cpu(txfd
->fd
.FDSystem
);
1864 if (netif_msg_tx_done(lp
)) {
1865 printk("%s: complete TxFD.\n", dev
->name
);
1868 tc35815_check_tx_stat(dev
, status
);
1870 skb
= fdsystem
!= 0xffffffff ?
1871 lp
->tx_skbs
[fdsystem
].skb
: NULL
;
1873 if (lp
->tx_skbs
[lp
->tfd_end
].skb
!= skb
) {
1874 printk("%s: tx_skbs mismatch.\n", dev
->name
);
1878 BUG_ON(lp
->tx_skbs
[lp
->tfd_end
].skb
!= skb
);
1881 lp
->stats
.tx_bytes
+= skb
->len
;
1882 pci_unmap_single(lp
->pci_dev
, lp
->tx_skbs
[lp
->tfd_end
].skb_dma
, skb
->len
, PCI_DMA_TODEVICE
);
1883 lp
->tx_skbs
[lp
->tfd_end
].skb
= NULL
;
1884 lp
->tx_skbs
[lp
->tfd_end
].skb_dma
= 0;
1886 dev_kfree_skb_any(skb
);
1888 dev_kfree_skb_irq(skb
);
1891 txfd
->fd
.FDSystem
= cpu_to_le32(0xffffffff);
1893 lp
->tfd_end
= (lp
->tfd_end
+ 1) % TX_FD_NUM
;
1894 txfd
= &lp
->tfd_base
[lp
->tfd_end
];
1896 if ((fdnext
& ~FD_Next_EOL
) != fd_virt_to_bus(lp
, txfd
)) {
1897 printk("%s: TxFD FDNext invalid.\n", dev
->name
);
1901 if (fdnext
& FD_Next_EOL
) {
1902 /* DMA Transmitter has been stopping... */
1903 if (lp
->tfd_end
!= lp
->tfd_start
) {
1904 struct tc35815_regs __iomem
*tr
=
1905 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1906 int head
= (lp
->tfd_start
+ TX_FD_NUM
- 1) % TX_FD_NUM
;
1907 struct TxFD
* txhead
= &lp
->tfd_base
[head
];
1908 int qlen
= (lp
->tfd_start
+ TX_FD_NUM
1909 - lp
->tfd_end
) % TX_FD_NUM
;
1912 if (!(le32_to_cpu(txfd
->fd
.FDCtl
) & FD_CownsFD
)) {
1913 printk("%s: TxFD FDCtl invalid.\n", dev
->name
);
1917 /* log max queue length */
1918 if (lp
->lstats
.max_tx_qlen
< qlen
)
1919 lp
->lstats
.max_tx_qlen
= qlen
;
1922 /* start DMA Transmitter again */
1923 txhead
->fd
.FDNext
|= cpu_to_le32(FD_Next_EOL
);
1925 txhead
->fd
.FDCtl
|= cpu_to_le32(FD_FrmOpt_IntTx
);
1927 if (netif_msg_tx_queued(lp
)) {
1928 printk("%s: start TxFD on queue.\n",
1932 tc_writel(fd_virt_to_bus(lp
, txfd
), &tr
->TxFrmPtr
);
1938 /* If we had stopped the queue due to a "tx full"
1939 * condition, and space has now been made available,
1940 * wake up the queue.
1942 if (netif_queue_stopped(dev
) && ! tc35815_tx_full(dev
))
1943 netif_wake_queue(dev
);
1946 /* The inverse routine to tc35815_open(). */
1948 tc35815_close(struct net_device
*dev
)
1950 struct tc35815_local
*lp
= dev
->priv
;
1952 netif_stop_queue(dev
);
1954 napi_disable(&lp
->napi
);
1957 /* Flush the Tx and disable Rx here. */
1959 del_timer(&lp
->timer
); /* Kill if running */
1960 tc35815_chip_reset(dev
);
1961 free_irq(dev
->irq
, dev
);
1963 tc35815_free_queues(dev
);
1970 * Get the current statistics.
1971 * This may be called with the card open or closed.
1973 static struct net_device_stats
*tc35815_get_stats(struct net_device
*dev
)
1975 struct tc35815_local
*lp
= dev
->priv
;
1976 struct tc35815_regs __iomem
*tr
=
1977 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1978 if (netif_running(dev
)) {
1979 /* Update the statistics from the device registers. */
1980 lp
->stats
.rx_missed_errors
= tc_readl(&tr
->Miss_Cnt
);
1986 static void tc35815_set_cam_entry(struct net_device
*dev
, int index
, unsigned char *addr
)
1988 struct tc35815_local
*lp
= dev
->priv
;
1989 struct tc35815_regs __iomem
*tr
=
1990 (struct tc35815_regs __iomem
*)dev
->base_addr
;
1991 int cam_index
= index
* 6;
1994 saved_addr
= tc_readl(&tr
->CAM_Adr
);
1996 if (netif_msg_hw(lp
)) {
1998 printk(KERN_DEBUG
"%s: CAM %d:", dev
->name
, index
);
1999 for (i
= 0; i
< 6; i
++)
2000 printk(" %02x", addr
[i
]);
2004 /* read modify write */
2005 tc_writel(cam_index
- 2, &tr
->CAM_Adr
);
2006 cam_data
= tc_readl(&tr
->CAM_Data
) & 0xffff0000;
2007 cam_data
|= addr
[0] << 8 | addr
[1];
2008 tc_writel(cam_data
, &tr
->CAM_Data
);
2009 /* write whole word */
2010 tc_writel(cam_index
+ 2, &tr
->CAM_Adr
);
2011 cam_data
= (addr
[2] << 24) | (addr
[3] << 16) | (addr
[4] << 8) | addr
[5];
2012 tc_writel(cam_data
, &tr
->CAM_Data
);
2014 /* write whole word */
2015 tc_writel(cam_index
, &tr
->CAM_Adr
);
2016 cam_data
= (addr
[0] << 24) | (addr
[1] << 16) | (addr
[2] << 8) | addr
[3];
2017 tc_writel(cam_data
, &tr
->CAM_Data
);
2018 /* read modify write */
2019 tc_writel(cam_index
+ 4, &tr
->CAM_Adr
);
2020 cam_data
= tc_readl(&tr
->CAM_Data
) & 0x0000ffff;
2021 cam_data
|= addr
[4] << 24 | (addr
[5] << 16);
2022 tc_writel(cam_data
, &tr
->CAM_Data
);
2025 tc_writel(saved_addr
, &tr
->CAM_Adr
);
2030 * Set or clear the multicast filter for this adaptor.
2031 * num_addrs == -1 Promiscuous mode, receive all packets
2032 * num_addrs == 0 Normal mode, clear multicast list
2033 * num_addrs > 0 Multicast mode, receive normal and MC packets,
2034 * and do best-effort filtering.
2037 tc35815_set_multicast_list(struct net_device
*dev
)
2039 struct tc35815_regs __iomem
*tr
=
2040 (struct tc35815_regs __iomem
*)dev
->base_addr
;
2042 if (dev
->flags
&IFF_PROMISC
)
2044 #ifdef WORKAROUND_100HALF_PROMISC
2045 /* With some (all?) 100MHalf HUB, controller will hang
2046 * if we enabled promiscuous mode before linkup... */
2047 struct tc35815_local
*lp
= dev
->priv
;
2048 int pid
= lp
->phy_addr
;
2049 if (!(tc_mdio_read(dev
, pid
, MII_BMSR
) & BMSR_LSTATUS
))
2052 /* Enable promiscuous mode */
2053 tc_writel(CAM_CompEn
| CAM_BroadAcc
| CAM_GroupAcc
| CAM_StationAcc
, &tr
->CAM_Ctl
);
2055 else if((dev
->flags
&IFF_ALLMULTI
) || dev
->mc_count
> CAM_ENTRY_MAX
- 3)
2057 /* CAM 0, 1, 20 are reserved. */
2058 /* Disable promiscuous mode, use normal mode. */
2059 tc_writel(CAM_CompEn
| CAM_BroadAcc
| CAM_GroupAcc
, &tr
->CAM_Ctl
);
2061 else if(dev
->mc_count
)
2063 struct dev_mc_list
* cur_addr
= dev
->mc_list
;
2065 int ena_bits
= CAM_Ena_Bit(CAM_ENTRY_SOURCE
);
2067 tc_writel(0, &tr
->CAM_Ctl
);
2068 /* Walk the address list, and load the filter */
2069 for (i
= 0; i
< dev
->mc_count
; i
++, cur_addr
= cur_addr
->next
) {
2072 /* entry 0,1 is reserved. */
2073 tc35815_set_cam_entry(dev
, i
+ 2, cur_addr
->dmi_addr
);
2074 ena_bits
|= CAM_Ena_Bit(i
+ 2);
2076 tc_writel(ena_bits
, &tr
->CAM_Ena
);
2077 tc_writel(CAM_CompEn
| CAM_BroadAcc
, &tr
->CAM_Ctl
);
2080 tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE
), &tr
->CAM_Ena
);
2081 tc_writel(CAM_CompEn
| CAM_BroadAcc
, &tr
->CAM_Ctl
);
2085 static void tc35815_get_drvinfo(struct net_device
*dev
, struct ethtool_drvinfo
*info
)
2087 struct tc35815_local
*lp
= dev
->priv
;
2088 strcpy(info
->driver
, MODNAME
);
2089 strcpy(info
->version
, DRV_VERSION
);
2090 strcpy(info
->bus_info
, pci_name(lp
->pci_dev
));
2093 static int tc35815_get_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
2095 struct tc35815_local
*lp
= dev
->priv
;
2096 spin_lock_irq(&lp
->lock
);
2097 mii_ethtool_gset(&lp
->mii
, cmd
);
2098 spin_unlock_irq(&lp
->lock
);
2102 static int tc35815_set_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
2104 struct tc35815_local
*lp
= dev
->priv
;
2106 #if 1 /* use our negotiation method... */
2107 /* Verify the settings we care about. */
2108 if (cmd
->autoneg
!= AUTONEG_ENABLE
&&
2109 cmd
->autoneg
!= AUTONEG_DISABLE
)
2111 if (cmd
->autoneg
== AUTONEG_DISABLE
&&
2112 ((cmd
->speed
!= SPEED_100
&&
2113 cmd
->speed
!= SPEED_10
) ||
2114 (cmd
->duplex
!= DUPLEX_HALF
&&
2115 cmd
->duplex
!= DUPLEX_FULL
)))
2118 /* Ok, do it to it. */
2119 spin_lock_irq(&lp
->lock
);
2120 del_timer(&lp
->timer
);
2121 tc35815_start_auto_negotiation(dev
, cmd
);
2122 spin_unlock_irq(&lp
->lock
);
2125 spin_lock_irq(&lp
->lock
);
2126 rc
= mii_ethtool_sset(&lp
->mii
, cmd
);
2127 spin_unlock_irq(&lp
->lock
);
2132 static int tc35815_nway_reset(struct net_device
*dev
)
2134 struct tc35815_local
*lp
= dev
->priv
;
2136 spin_lock_irq(&lp
->lock
);
2137 rc
= mii_nway_restart(&lp
->mii
);
2138 spin_unlock_irq(&lp
->lock
);
2142 static u32
tc35815_get_link(struct net_device
*dev
)
2144 struct tc35815_local
*lp
= dev
->priv
;
2146 spin_lock_irq(&lp
->lock
);
2147 rc
= mii_link_ok(&lp
->mii
);
2148 spin_unlock_irq(&lp
->lock
);
2152 static u32
tc35815_get_msglevel(struct net_device
*dev
)
2154 struct tc35815_local
*lp
= dev
->priv
;
2155 return lp
->msg_enable
;
2158 static void tc35815_set_msglevel(struct net_device
*dev
, u32 datum
)
2160 struct tc35815_local
*lp
= dev
->priv
;
2161 lp
->msg_enable
= datum
;
2164 static int tc35815_get_sset_count(struct net_device
*dev
, int sset
)
2166 struct tc35815_local
*lp
= dev
->priv
;
2170 return sizeof(lp
->lstats
) / sizeof(int);
2176 static void tc35815_get_ethtool_stats(struct net_device
*dev
, struct ethtool_stats
*stats
, u64
*data
)
2178 struct tc35815_local
*lp
= dev
->priv
;
2179 data
[0] = lp
->lstats
.max_tx_qlen
;
2180 data
[1] = lp
->lstats
.tx_ints
;
2181 data
[2] = lp
->lstats
.rx_ints
;
2182 data
[3] = lp
->lstats
.tx_underrun
;
2186 const char str
[ETH_GSTRING_LEN
];
2187 } ethtool_stats_keys
[] = {
2194 static void tc35815_get_strings(struct net_device
*dev
, u32 stringset
, u8
*data
)
2196 memcpy(data
, ethtool_stats_keys
, sizeof(ethtool_stats_keys
));
2199 static const struct ethtool_ops tc35815_ethtool_ops
= {
2200 .get_drvinfo
= tc35815_get_drvinfo
,
2201 .get_settings
= tc35815_get_settings
,
2202 .set_settings
= tc35815_set_settings
,
2203 .nway_reset
= tc35815_nway_reset
,
2204 .get_link
= tc35815_get_link
,
2205 .get_msglevel
= tc35815_get_msglevel
,
2206 .set_msglevel
= tc35815_set_msglevel
,
2207 .get_strings
= tc35815_get_strings
,
2208 .get_sset_count
= tc35815_get_sset_count
,
2209 .get_ethtool_stats
= tc35815_get_ethtool_stats
,
2212 static int tc35815_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
2214 struct tc35815_local
*lp
= dev
->priv
;
2217 if (!netif_running(dev
))
2220 spin_lock_irq(&lp
->lock
);
2221 rc
= generic_mii_ioctl(&lp
->mii
, if_mii(rq
), cmd
, NULL
);
2222 spin_unlock_irq(&lp
->lock
);
2227 static int tc_mdio_read(struct net_device
*dev
, int phy_id
, int location
)
2229 struct tc35815_regs __iomem
*tr
=
2230 (struct tc35815_regs __iomem
*)dev
->base_addr
;
2232 tc_writel(MD_CA_Busy
| (phy_id
<< 5) | location
, &tr
->MD_CA
);
2233 while (tc_readl(&tr
->MD_CA
) & MD_CA_Busy
)
2235 data
= tc_readl(&tr
->MD_Data
);
2236 return data
& 0xffff;
2239 static void tc_mdio_write(struct net_device
*dev
, int phy_id
, int location
,
2242 struct tc35815_regs __iomem
*tr
=
2243 (struct tc35815_regs __iomem
*)dev
->base_addr
;
2244 tc_writel(val
, &tr
->MD_Data
);
2245 tc_writel(MD_CA_Busy
| MD_CA_Wr
| (phy_id
<< 5) | location
, &tr
->MD_CA
);
2246 while (tc_readl(&tr
->MD_CA
) & MD_CA_Busy
)
2250 /* Auto negotiation. The scheme is very simple. We have a timer routine
2251 * that keeps watching the auto negotiation process as it progresses.
2252 * The DP83840 is first told to start doing it's thing, we set up the time
2253 * and place the timer state machine in it's initial state.
2255 * Here the timer peeks at the DP83840 status registers at each click to see
2256 * if the auto negotiation has completed, we assume here that the DP83840 PHY
2257 * will time out at some point and just tell us what (didn't) happen. For
2258 * complete coverage we only allow so many of the ticks at this level to run,
2259 * when this has expired we print a warning message and try another strategy.
2260 * This "other" strategy is to force the interface into various speed/duplex
2261 * configurations and we stop when we see a link-up condition before the
2262 * maximum number of "peek" ticks have occurred.
2264 * Once a valid link status has been detected we configure the BigMAC and
2265 * the rest of the Happy Meal to speak the most efficient protocol we could
2266 * get a clean link for. The priority for link configurations, highest first
2268 * 100 Base-T Full Duplex
2269 * 100 Base-T Half Duplex
2270 * 10 Base-T Full Duplex
2271 * 10 Base-T Half Duplex
2273 * We start a new timer now, after a successful auto negotiation status has
2274 * been detected. This timer just waits for the link-up bit to get set in
2275 * the BMCR of the DP83840. When this occurs we print a kernel log message
2276 * describing the link type in use and the fact that it is up.
2278 * If a fatal error of some sort is signalled and detected in the interrupt
2279 * service routine, and the chip is reset, or the link is ifconfig'd down
2280 * and then back up, this entire process repeats itself all over again.
2282 /* Note: Above comments are come from sunhme driver. */
2284 static int tc35815_try_next_permutation(struct net_device
*dev
)
2286 struct tc35815_local
*lp
= dev
->priv
;
2287 int pid
= lp
->phy_addr
;
2288 unsigned short bmcr
;
2290 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2292 /* Downgrade from full to half duplex. Only possible via ethtool. */
2293 if (bmcr
& BMCR_FULLDPLX
) {
2294 bmcr
&= ~BMCR_FULLDPLX
;
2295 printk(KERN_DEBUG
"%s: try next permutation (BMCR %x)\n", dev
->name
, bmcr
);
2296 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
);
2300 /* Downgrade from 100 to 10. */
2301 if (bmcr
& BMCR_SPEED100
) {
2302 bmcr
&= ~BMCR_SPEED100
;
2303 printk(KERN_DEBUG
"%s: try next permutation (BMCR %x)\n", dev
->name
, bmcr
);
2304 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
);
2308 /* We've tried everything. */
2313 tc35815_display_link_mode(struct net_device
*dev
)
2315 struct tc35815_local
*lp
= dev
->priv
;
2316 int pid
= lp
->phy_addr
;
2317 unsigned short lpa
, bmcr
;
2318 char *speed
= "", *duplex
= "";
2320 lpa
= tc_mdio_read(dev
, pid
, MII_LPA
);
2321 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2322 if (options
.speed
? (bmcr
& BMCR_SPEED100
) : (lpa
& (LPA_100HALF
| LPA_100FULL
)))
2326 if (options
.duplex
? (bmcr
& BMCR_FULLDPLX
) : (lpa
& (LPA_100FULL
| LPA_10FULL
)))
2327 duplex
= "Full Duplex";
2329 duplex
= "Half Duplex";
2331 if (netif_msg_link(lp
))
2332 printk(KERN_INFO
"%s: Link is up at %s, %s.\n",
2333 dev
->name
, speed
, duplex
);
2334 printk(KERN_DEBUG
"%s: MII BMCR %04x BMSR %04x LPA %04x\n",
2336 bmcr
, tc_mdio_read(dev
, pid
, MII_BMSR
), lpa
);
2339 static void tc35815_display_forced_link_mode(struct net_device
*dev
)
2341 struct tc35815_local
*lp
= dev
->priv
;
2342 int pid
= lp
->phy_addr
;
2343 unsigned short bmcr
;
2344 char *speed
= "", *duplex
= "";
2346 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2347 if (bmcr
& BMCR_SPEED100
)
2351 if (bmcr
& BMCR_FULLDPLX
)
2352 duplex
= "Full Duplex.\n";
2354 duplex
= "Half Duplex.\n";
2356 if (netif_msg_link(lp
))
2357 printk(KERN_INFO
"%s: Link has been forced up at %s, %s",
2358 dev
->name
, speed
, duplex
);
2361 static void tc35815_set_link_modes(struct net_device
*dev
)
2363 struct tc35815_local
*lp
= dev
->priv
;
2364 struct tc35815_regs __iomem
*tr
=
2365 (struct tc35815_regs __iomem
*)dev
->base_addr
;
2366 int pid
= lp
->phy_addr
;
2367 unsigned short bmcr
, lpa
;
2370 if (lp
->timer_state
== arbwait
) {
2371 lpa
= tc_mdio_read(dev
, pid
, MII_LPA
);
2372 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2373 printk(KERN_DEBUG
"%s: MII BMCR %04x BMSR %04x LPA %04x\n",
2375 bmcr
, tc_mdio_read(dev
, pid
, MII_BMSR
), lpa
);
2376 if (!(lpa
& (LPA_10HALF
| LPA_10FULL
|
2377 LPA_100HALF
| LPA_100FULL
))) {
2378 /* fall back to 10HALF */
2379 printk(KERN_INFO
"%s: bad ability %04x - falling back to 10HD.\n",
2383 if (options
.duplex
? (bmcr
& BMCR_FULLDPLX
) : (lpa
& (LPA_100FULL
| LPA_10FULL
)))
2387 if (options
.speed
? (bmcr
& BMCR_SPEED100
) : (lpa
& (LPA_100HALF
| LPA_100FULL
)))
2392 /* Forcing a link mode. */
2393 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2394 if (bmcr
& BMCR_FULLDPLX
)
2398 if (bmcr
& BMCR_SPEED100
)
2404 tc_writel(tc_readl(&tr
->MAC_Ctl
) | MAC_HaltReq
, &tr
->MAC_Ctl
);
2405 if (lp
->fullduplex
) {
2406 tc_writel(tc_readl(&tr
->MAC_Ctl
) | MAC_FullDup
, &tr
->MAC_Ctl
);
2408 tc_writel(tc_readl(&tr
->MAC_Ctl
) & ~MAC_FullDup
, &tr
->MAC_Ctl
);
2410 tc_writel(tc_readl(&tr
->MAC_Ctl
) & ~MAC_HaltReq
, &tr
->MAC_Ctl
);
2412 /* TX4939 PCFG.SPEEDn bit will be changed on NETDEV_CHANGE event. */
2414 #ifndef NO_CHECK_CARRIER
2415 /* TX4939 does not have EnLCarr */
2416 if (lp
->boardtype
!= TC35815_TX4939
) {
2417 #ifdef WORKAROUND_LOSTCAR
2418 /* WORKAROUND: enable LostCrS only if half duplex operation */
2419 if (!lp
->fullduplex
&& lp
->boardtype
!= TC35815_TX4939
)
2420 tc_writel(tc_readl(&tr
->Tx_Ctl
) | Tx_EnLCarr
, &tr
->Tx_Ctl
);
2424 lp
->mii
.full_duplex
= lp
->fullduplex
;
2427 static void tc35815_timer(unsigned long data
)
2429 struct net_device
*dev
= (struct net_device
*)data
;
2430 struct tc35815_local
*lp
= dev
->priv
;
2431 int pid
= lp
->phy_addr
;
2432 unsigned short bmsr
, bmcr
, lpa
;
2433 int restart_timer
= 0;
2435 spin_lock_irq(&lp
->lock
);
2438 switch (lp
->timer_state
) {
2441 * Only allow for 5 ticks, thats 10 seconds and much too
2442 * long to wait for arbitration to complete.
2444 /* TC35815 need more times... */
2445 if (lp
->timer_ticks
>= 10) {
2446 /* Enter force mode. */
2447 if (!options
.doforce
) {
2448 printk(KERN_NOTICE
"%s: Auto-Negotiation unsuccessful,"
2449 " cable probblem?\n", dev
->name
);
2450 /* Try to restart the adaptor. */
2451 tc35815_restart(dev
);
2454 printk(KERN_NOTICE
"%s: Auto-Negotiation unsuccessful,"
2455 " trying force link mode\n", dev
->name
);
2456 printk(KERN_DEBUG
"%s: BMCR %x BMSR %x\n", dev
->name
,
2457 tc_mdio_read(dev
, pid
, MII_BMCR
),
2458 tc_mdio_read(dev
, pid
, MII_BMSR
));
2459 bmcr
= BMCR_SPEED100
;
2460 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
);
2463 * OK, seems we need do disable the transceiver
2464 * for the first tick to make sure we get an
2465 * accurate link state at the second tick.
2468 lp
->timer_state
= ltrywait
;
2469 lp
->timer_ticks
= 0;
2472 /* Anything interesting happen? */
2473 bmsr
= tc_mdio_read(dev
, pid
, MII_BMSR
);
2474 if (bmsr
& BMSR_ANEGCOMPLETE
) {
2475 /* Just what we've been waiting for... */
2476 tc35815_set_link_modes(dev
);
2479 * Success, at least so far, advance our state
2482 lp
->timer_state
= lupwait
;
2492 * Auto negotiation was successful and we are awaiting a
2493 * link up status. I have decided to let this timer run
2494 * forever until some sort of error is signalled, reporting
2495 * a message to the user at 10 second intervals.
2497 bmsr
= tc_mdio_read(dev
, pid
, MII_BMSR
);
2498 if (bmsr
& BMSR_LSTATUS
) {
2500 * Wheee, it's up, display the link mode in use and put
2501 * the timer to sleep.
2503 tc35815_display_link_mode(dev
);
2504 netif_carrier_on(dev
);
2505 #ifdef WORKAROUND_100HALF_PROMISC
2506 /* delayed promiscuous enabling */
2507 if (dev
->flags
& IFF_PROMISC
)
2508 tc35815_set_multicast_list(dev
);
2511 lp
->saved_lpa
= tc_mdio_read(dev
, pid
, MII_LPA
);
2512 lp
->timer_state
= lcheck
;
2515 lp
->timer_state
= asleep
;
2519 if (lp
->timer_ticks
>= 10) {
2520 printk(KERN_NOTICE
"%s: Auto negotiation successful, link still "
2521 "not completely up.\n", dev
->name
);
2522 lp
->timer_ticks
= 0;
2532 * Making the timeout here too long can make it take
2533 * annoyingly long to attempt all of the link mode
2534 * permutations, but then again this is essentially
2535 * error recovery code for the most part.
2537 bmsr
= tc_mdio_read(dev
, pid
, MII_BMSR
);
2538 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2539 if (lp
->timer_ticks
== 1) {
2541 * Re-enable transceiver, we'll re-enable the
2542 * transceiver next tick, then check link state
2543 * on the following tick.
2548 if (lp
->timer_ticks
== 2) {
2552 if (bmsr
& BMSR_LSTATUS
) {
2553 /* Force mode selection success. */
2554 tc35815_display_forced_link_mode(dev
);
2555 netif_carrier_on(dev
);
2556 tc35815_set_link_modes(dev
);
2557 #ifdef WORKAROUND_100HALF_PROMISC
2558 /* delayed promiscuous enabling */
2559 if (dev
->flags
& IFF_PROMISC
)
2560 tc35815_set_multicast_list(dev
);
2563 lp
->saved_lpa
= tc_mdio_read(dev
, pid
, MII_LPA
);
2564 lp
->timer_state
= lcheck
;
2567 lp
->timer_state
= asleep
;
2571 if (lp
->timer_ticks
>= 4) { /* 6 seconds or so... */
2574 ret
= tc35815_try_next_permutation(dev
);
2577 * Aieee, tried them all, reset the
2578 * chip and try all over again.
2580 printk(KERN_NOTICE
"%s: Link down, "
2584 /* Try to restart the adaptor. */
2585 tc35815_restart(dev
);
2588 lp
->timer_ticks
= 0;
2597 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2598 lpa
= tc_mdio_read(dev
, pid
, MII_LPA
);
2599 if (bmcr
& (BMCR_PDOWN
| BMCR_ISOLATE
| BMCR_RESET
)) {
2600 printk(KERN_ERR
"%s: PHY down? (BMCR %x)\n", dev
->name
,
2602 } else if ((lp
->saved_lpa
^ lpa
) &
2603 (LPA_100FULL
|LPA_100HALF
|LPA_10FULL
|LPA_10HALF
)) {
2604 printk(KERN_NOTICE
"%s: link status changed"
2605 " (BMCR %x LPA %x->%x)\n", dev
->name
,
2606 bmcr
, lp
->saved_lpa
, lpa
);
2612 /* Try to restart the adaptor. */
2613 tc35815_restart(dev
);
2618 /* Can't happens.... */
2619 printk(KERN_ERR
"%s: Aieee, link timer is asleep but we got "
2620 "one anyways!\n", dev
->name
);
2622 lp
->timer_ticks
= 0;
2623 lp
->timer_state
= asleep
; /* foo on you */
2627 if (restart_timer
) {
2628 lp
->timer
.expires
= jiffies
+ msecs_to_jiffies(1200);
2629 add_timer(&lp
->timer
);
2632 spin_unlock_irq(&lp
->lock
);
2635 static void tc35815_start_auto_negotiation(struct net_device
*dev
,
2636 struct ethtool_cmd
*ep
)
2638 struct tc35815_local
*lp
= dev
->priv
;
2639 int pid
= lp
->phy_addr
;
2640 unsigned short bmsr
, bmcr
, advertize
;
2643 netif_carrier_off(dev
);
2644 bmsr
= tc_mdio_read(dev
, pid
, MII_BMSR
);
2645 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2646 advertize
= tc_mdio_read(dev
, pid
, MII_ADVERTISE
);
2648 if (ep
== NULL
|| ep
->autoneg
== AUTONEG_ENABLE
) {
2649 if (options
.speed
|| options
.duplex
) {
2650 /* Advertise only specified configuration. */
2651 advertize
&= ~(ADVERTISE_10HALF
|
2655 if (options
.speed
!= 10) {
2656 if (options
.duplex
!= 1)
2657 advertize
|= ADVERTISE_100FULL
;
2658 if (options
.duplex
!= 2)
2659 advertize
|= ADVERTISE_100HALF
;
2661 if (options
.speed
!= 100) {
2662 if (options
.duplex
!= 1)
2663 advertize
|= ADVERTISE_10FULL
;
2664 if (options
.duplex
!= 2)
2665 advertize
|= ADVERTISE_10HALF
;
2667 if (options
.speed
== 100)
2668 bmcr
|= BMCR_SPEED100
;
2669 else if (options
.speed
== 10)
2670 bmcr
&= ~BMCR_SPEED100
;
2671 if (options
.duplex
== 2)
2672 bmcr
|= BMCR_FULLDPLX
;
2673 else if (options
.duplex
== 1)
2674 bmcr
&= ~BMCR_FULLDPLX
;
2676 /* Advertise everything we can support. */
2677 if (bmsr
& BMSR_10HALF
)
2678 advertize
|= ADVERTISE_10HALF
;
2680 advertize
&= ~ADVERTISE_10HALF
;
2681 if (bmsr
& BMSR_10FULL
)
2682 advertize
|= ADVERTISE_10FULL
;
2684 advertize
&= ~ADVERTISE_10FULL
;
2685 if (bmsr
& BMSR_100HALF
)
2686 advertize
|= ADVERTISE_100HALF
;
2688 advertize
&= ~ADVERTISE_100HALF
;
2689 if (bmsr
& BMSR_100FULL
)
2690 advertize
|= ADVERTISE_100FULL
;
2692 advertize
&= ~ADVERTISE_100FULL
;
2695 tc_mdio_write(dev
, pid
, MII_ADVERTISE
, advertize
);
2697 /* Enable Auto-Negotiation, this is usually on already... */
2698 bmcr
|= BMCR_ANENABLE
;
2699 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
);
2701 /* Restart it to make sure it is going. */
2702 bmcr
|= BMCR_ANRESTART
;
2703 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
);
2704 printk(KERN_DEBUG
"%s: ADVERTISE %x BMCR %x\n", dev
->name
, advertize
, bmcr
);
2706 /* BMCR_ANRESTART self clears when the process has begun. */
2707 timeout
= 64; /* More than enough. */
2709 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2710 if (!(bmcr
& BMCR_ANRESTART
))
2711 break; /* got it. */
2715 printk(KERN_ERR
"%s: TC35815 would not start auto "
2716 "negotiation BMCR=0x%04x\n",
2718 printk(KERN_NOTICE
"%s: Performing force link "
2719 "detection.\n", dev
->name
);
2722 printk(KERN_DEBUG
"%s: auto negotiation started.\n", dev
->name
);
2723 lp
->timer_state
= arbwait
;
2727 /* Force the link up, trying first a particular mode.
2728 * Either we are here at the request of ethtool or
2729 * because the Happy Meal would not start to autoneg.
2732 /* Disable auto-negotiation in BMCR, enable the duplex and
2733 * speed setting, init the timer state machine, and fire it off.
2735 if (ep
== NULL
|| ep
->autoneg
== AUTONEG_ENABLE
) {
2736 bmcr
= BMCR_SPEED100
;
2738 if (ep
->speed
== SPEED_100
)
2739 bmcr
= BMCR_SPEED100
;
2742 if (ep
->duplex
== DUPLEX_FULL
)
2743 bmcr
|= BMCR_FULLDPLX
;
2745 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
);
2747 /* OK, seems we need do disable the transceiver for the first
2748 * tick to make sure we get an accurate link state at the
2751 lp
->timer_state
= ltrywait
;
2754 del_timer(&lp
->timer
);
2755 lp
->timer_ticks
= 0;
2756 lp
->timer
.expires
= jiffies
+ msecs_to_jiffies(1200);
2757 add_timer(&lp
->timer
);
2760 static void tc35815_find_phy(struct net_device
*dev
)
2762 struct tc35815_local
*lp
= dev
->priv
;
2763 int pid
= lp
->phy_addr
;
2767 for (pid
= 31; pid
>= 0; pid
--) {
2768 id0
= tc_mdio_read(dev
, pid
, MII_BMSR
);
2769 if (id0
!= 0xffff && id0
!= 0x0000 &&
2770 (id0
& BMSR_RESV
) != (0xffff & BMSR_RESV
) /* paranoia? */
2777 printk(KERN_ERR
"%s: No MII Phy found.\n",
2779 lp
->phy_addr
= pid
= 0;
2782 lp
->mii_id
[0] = tc_mdio_read(dev
, pid
, MII_PHYSID1
);
2783 lp
->mii_id
[1] = tc_mdio_read(dev
, pid
, MII_PHYSID2
);
2784 if (netif_msg_hw(lp
))
2785 printk(KERN_INFO
"%s: PHY(%02x) ID %04x %04x\n", dev
->name
,
2786 pid
, lp
->mii_id
[0], lp
->mii_id
[1]);
2789 static void tc35815_phy_chip_init(struct net_device
*dev
)
2791 struct tc35815_local
*lp
= dev
->priv
;
2792 int pid
= lp
->phy_addr
;
2793 unsigned short bmcr
;
2794 struct ethtool_cmd ecmd
, *ep
;
2796 /* dis-isolate if needed. */
2797 bmcr
= tc_mdio_read(dev
, pid
, MII_BMCR
);
2798 if (bmcr
& BMCR_ISOLATE
) {
2800 printk(KERN_DEBUG
"%s: unisolating...", dev
->name
);
2801 tc_mdio_write(dev
, pid
, MII_BMCR
, bmcr
& ~BMCR_ISOLATE
);
2803 if (!(tc_mdio_read(dev
, pid
, MII_BMCR
) & BMCR_ISOLATE
))
2807 printk(" %s.\n", count
? "done" : "failed");
2810 if (options
.speed
&& options
.duplex
) {
2811 ecmd
.autoneg
= AUTONEG_DISABLE
;
2812 ecmd
.speed
= options
.speed
== 10 ? SPEED_10
: SPEED_100
;
2813 ecmd
.duplex
= options
.duplex
== 1 ? DUPLEX_HALF
: DUPLEX_FULL
;
2818 tc35815_start_auto_negotiation(dev
, ep
);
2821 static void tc35815_chip_reset(struct net_device
*dev
)
2823 struct tc35815_regs __iomem
*tr
=
2824 (struct tc35815_regs __iomem
*)dev
->base_addr
;
2826 /* reset the controller */
2827 tc_writel(MAC_Reset
, &tr
->MAC_Ctl
);
2828 udelay(4); /* 3200ns */
2830 while (tc_readl(&tr
->MAC_Ctl
) & MAC_Reset
) {
2832 printk(KERN_ERR
"%s: MAC reset failed.\n", dev
->name
);
2837 tc_writel(0, &tr
->MAC_Ctl
);
2839 /* initialize registers to default value */
2840 tc_writel(0, &tr
->DMA_Ctl
);
2841 tc_writel(0, &tr
->TxThrsh
);
2842 tc_writel(0, &tr
->TxPollCtr
);
2843 tc_writel(0, &tr
->RxFragSize
);
2844 tc_writel(0, &tr
->Int_En
);
2845 tc_writel(0, &tr
->FDA_Bas
);
2846 tc_writel(0, &tr
->FDA_Lim
);
2847 tc_writel(0xffffffff, &tr
->Int_Src
); /* Write 1 to clear */
2848 tc_writel(0, &tr
->CAM_Ctl
);
2849 tc_writel(0, &tr
->Tx_Ctl
);
2850 tc_writel(0, &tr
->Rx_Ctl
);
2851 tc_writel(0, &tr
->CAM_Ena
);
2852 (void)tc_readl(&tr
->Miss_Cnt
); /* Read to clear */
2854 /* initialize internal SRAM */
2855 tc_writel(DMA_TestMode
, &tr
->DMA_Ctl
);
2856 for (i
= 0; i
< 0x1000; i
+= 4) {
2857 tc_writel(i
, &tr
->CAM_Adr
);
2858 tc_writel(0, &tr
->CAM_Data
);
2860 tc_writel(0, &tr
->DMA_Ctl
);
2863 static void tc35815_chip_init(struct net_device
*dev
)
2865 struct tc35815_local
*lp
= dev
->priv
;
2866 struct tc35815_regs __iomem
*tr
=
2867 (struct tc35815_regs __iomem
*)dev
->base_addr
;
2868 unsigned long txctl
= TX_CTL_CMD
;
2870 tc35815_phy_chip_init(dev
);
2872 /* load station address to CAM */
2873 tc35815_set_cam_entry(dev
, CAM_ENTRY_SOURCE
, dev
->dev_addr
);
2875 /* Enable CAM (broadcast and unicast) */
2876 tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE
), &tr
->CAM_Ena
);
2877 tc_writel(CAM_CompEn
| CAM_BroadAcc
, &tr
->CAM_Ctl
);
2879 /* Use DMA_RxAlign_2 to make IP header 4-byte aligned. */
2880 if (HAVE_DMA_RXALIGN(lp
))
2881 tc_writel(DMA_BURST_SIZE
| DMA_RxAlign_2
, &tr
->DMA_Ctl
);
2883 tc_writel(DMA_BURST_SIZE
, &tr
->DMA_Ctl
);
2884 #ifdef TC35815_USE_PACKEDBUFFER
2885 tc_writel(RxFrag_EnPack
| ETH_ZLEN
, &tr
->RxFragSize
); /* Packing */
2887 tc_writel(ETH_ZLEN
, &tr
->RxFragSize
);
2889 tc_writel(0, &tr
->TxPollCtr
); /* Batch mode */
2890 tc_writel(TX_THRESHOLD
, &tr
->TxThrsh
);
2891 tc_writel(INT_EN_CMD
, &tr
->Int_En
);
2894 tc_writel(fd_virt_to_bus(lp
, lp
->rfd_base
), &tr
->FDA_Bas
);
2895 tc_writel((unsigned long)lp
->rfd_limit
- (unsigned long)lp
->rfd_base
,
2898 * Activation method:
2899 * First, enable the MAC Transmitter and the DMA Receive circuits.
2900 * Then enable the DMA Transmitter and the MAC Receive circuits.
2902 tc_writel(fd_virt_to_bus(lp
, lp
->fbl_ptr
), &tr
->BLFrmPtr
); /* start DMA receiver */
2903 tc_writel(RX_CTL_CMD
, &tr
->Rx_Ctl
); /* start MAC receiver */
2905 /* start MAC transmitter */
2906 #ifndef NO_CHECK_CARRIER
2907 /* TX4939 does not have EnLCarr */
2908 if (lp
->boardtype
== TC35815_TX4939
)
2909 txctl
&= ~Tx_EnLCarr
;
2910 #ifdef WORKAROUND_LOSTCAR
2911 /* WORKAROUND: ignore LostCrS in full duplex operation */
2912 if ((lp
->timer_state
!= asleep
&& lp
->timer_state
!= lcheck
) ||
2914 txctl
&= ~Tx_EnLCarr
;
2916 #endif /* !NO_CHECK_CARRIER */
2918 txctl
&= ~Tx_EnComp
; /* disable global tx completion int. */
2920 tc_writel(txctl
, &tr
->Tx_Ctl
);
2924 static int tc35815_suspend(struct pci_dev
*pdev
, pm_message_t state
)
2926 struct net_device
*dev
= pci_get_drvdata(pdev
);
2927 struct tc35815_local
*lp
= dev
->priv
;
2928 unsigned long flags
;
2930 pci_save_state(pdev
);
2931 if (!netif_running(dev
))
2933 netif_device_detach(dev
);
2934 spin_lock_irqsave(&lp
->lock
, flags
);
2935 del_timer(&lp
->timer
); /* Kill if running */
2936 tc35815_chip_reset(dev
);
2937 spin_unlock_irqrestore(&lp
->lock
, flags
);
2938 pci_set_power_state(pdev
, PCI_D3hot
);
2942 static int tc35815_resume(struct pci_dev
*pdev
)
2944 struct net_device
*dev
= pci_get_drvdata(pdev
);
2945 struct tc35815_local
*lp
= dev
->priv
;
2946 unsigned long flags
;
2948 pci_restore_state(pdev
);
2949 if (!netif_running(dev
))
2951 pci_set_power_state(pdev
, PCI_D0
);
2952 spin_lock_irqsave(&lp
->lock
, flags
);
2953 tc35815_restart(dev
);
2954 spin_unlock_irqrestore(&lp
->lock
, flags
);
2955 netif_device_attach(dev
);
2958 #endif /* CONFIG_PM */
2960 static struct pci_driver tc35815_pci_driver
= {
2962 .id_table
= tc35815_pci_tbl
,
2963 .probe
= tc35815_init_one
,
2964 .remove
= __devexit_p(tc35815_remove_one
),
2966 .suspend
= tc35815_suspend
,
2967 .resume
= tc35815_resume
,
2971 module_param_named(speed
, options
.speed
, int, 0);
2972 MODULE_PARM_DESC(speed
, "0:auto, 10:10Mbps, 100:100Mbps");
2973 module_param_named(duplex
, options
.duplex
, int, 0);
2974 MODULE_PARM_DESC(duplex
, "0:auto, 1:half, 2:full");
2975 module_param_named(doforce
, options
.doforce
, int, 0);
2976 MODULE_PARM_DESC(doforce
, "try force link mode if auto-negotiation failed");
2978 static int __init
tc35815_init_module(void)
2980 return pci_register_driver(&tc35815_pci_driver
);
2983 static void __exit
tc35815_cleanup_module(void)
2985 pci_unregister_driver(&tc35815_pci_driver
);
2988 module_init(tc35815_init_module
);
2989 module_exit(tc35815_cleanup_module
);
2991 MODULE_DESCRIPTION("TOSHIBA TC35815 PCI 10M/100M Ethernet driver");
2992 MODULE_LICENSE("GPL");