[PATCH] Fix get_unmapped_area and fsync for hugetlb shm segments
[linux-2.6/mini2440.git] / drivers / ide / ide-disk.c
blobe2cea1889c4d350f4153146b64433cabbc72b620
1 /*
2 * linux/drivers/ide/ide-disk.c Version 1.18 Mar 05, 2003
4 * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
5 * Copyright (C) 1998-2002 Linux ATA Development
6 * Andre Hedrick <andre@linux-ide.org>
7 * Copyright (C) 2003 Red Hat <alan@redhat.com>
8 */
11 * Mostly written by Mark Lord <mlord@pobox.com>
12 * and Gadi Oxman <gadio@netvision.net.il>
13 * and Andre Hedrick <andre@linux-ide.org>
15 * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
17 * Version 1.00 move disk only code from ide.c to ide-disk.c
18 * support optional byte-swapping of all data
19 * Version 1.01 fix previous byte-swapping code
20 * Version 1.02 remove ", LBA" from drive identification msgs
21 * Version 1.03 fix display of id->buf_size for big-endian
22 * Version 1.04 add /proc configurable settings and S.M.A.R.T support
23 * Version 1.05 add capacity support for ATA3 >= 8GB
24 * Version 1.06 get boot-up messages to show full cyl count
25 * Version 1.07 disable door-locking if it fails
26 * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB,
27 * process of adding new ATA4 compliance.
28 * fixed problems in allowing fdisk to see
29 * the entire disk.
30 * Version 1.09 added increment of rq->sector in ide_multwrite
31 * added UDMA 3/4 reporting
32 * Version 1.10 request queue changes, Ultra DMA 100
33 * Version 1.11 added 48-bit lba
34 * Version 1.12 adding taskfile io access method
35 * Version 1.13 added standby and flush-cache for notifier
36 * Version 1.14 added acoustic-wcache
37 * Version 1.15 convert all calls to ide_raw_taskfile
38 * since args will return register content.
39 * Version 1.16 added suspend-resume-checkpower
40 * Version 1.17 do flush on standby, do flush on ATA < ATA6
41 * fix wcache setup.
44 #define IDEDISK_VERSION "1.18"
46 #undef REALLY_SLOW_IO /* most systems can safely undef this */
48 //#define DEBUG
50 #include <linux/module.h>
51 #include <linux/types.h>
52 #include <linux/string.h>
53 #include <linux/kernel.h>
54 #include <linux/timer.h>
55 #include <linux/mm.h>
56 #include <linux/interrupt.h>
57 #include <linux/major.h>
58 #include <linux/errno.h>
59 #include <linux/genhd.h>
60 #include <linux/slab.h>
61 #include <linux/delay.h>
62 #include <linux/mutex.h>
63 #include <linux/leds.h>
65 #define _IDE_DISK
67 #include <linux/ide.h>
69 #include <asm/byteorder.h>
70 #include <asm/irq.h>
71 #include <asm/uaccess.h>
72 #include <asm/io.h>
73 #include <asm/div64.h>
75 struct ide_disk_obj {
76 ide_drive_t *drive;
77 ide_driver_t *driver;
78 struct gendisk *disk;
79 struct kref kref;
80 unsigned int openers; /* protected by BKL for now */
83 static DEFINE_MUTEX(idedisk_ref_mutex);
85 #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)
87 #define ide_disk_g(disk) \
88 container_of((disk)->private_data, struct ide_disk_obj, driver)
90 static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
92 struct ide_disk_obj *idkp = NULL;
94 mutex_lock(&idedisk_ref_mutex);
95 idkp = ide_disk_g(disk);
96 if (idkp)
97 kref_get(&idkp->kref);
98 mutex_unlock(&idedisk_ref_mutex);
99 return idkp;
102 static void ide_disk_release(struct kref *);
104 static void ide_disk_put(struct ide_disk_obj *idkp)
106 mutex_lock(&idedisk_ref_mutex);
107 kref_put(&idkp->kref, ide_disk_release);
108 mutex_unlock(&idedisk_ref_mutex);
112 * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity"
113 * value for this drive (from its reported identification information).
115 * Returns: 1 if lba_capacity looks sensible
116 * 0 otherwise
118 * It is called only once for each drive.
120 static int lba_capacity_is_ok (struct hd_driveid *id)
122 unsigned long lba_sects, chs_sects, head, tail;
124 /* No non-LBA info .. so valid! */
125 if (id->cyls == 0)
126 return 1;
129 * The ATA spec tells large drives to return
130 * C/H/S = 16383/16/63 independent of their size.
131 * Some drives can be jumpered to use 15 heads instead of 16.
132 * Some drives can be jumpered to use 4092 cyls instead of 16383.
134 if ((id->cyls == 16383
135 || (id->cyls == 4092 && id->cur_cyls == 16383)) &&
136 id->sectors == 63 &&
137 (id->heads == 15 || id->heads == 16) &&
138 (id->lba_capacity >= 16383*63*id->heads))
139 return 1;
141 lba_sects = id->lba_capacity;
142 chs_sects = id->cyls * id->heads * id->sectors;
144 /* perform a rough sanity check on lba_sects: within 10% is OK */
145 if ((lba_sects - chs_sects) < chs_sects/10)
146 return 1;
148 /* some drives have the word order reversed */
149 head = ((lba_sects >> 16) & 0xffff);
150 tail = (lba_sects & 0xffff);
151 lba_sects = (head | (tail << 16));
152 if ((lba_sects - chs_sects) < chs_sects/10) {
153 id->lba_capacity = lba_sects;
154 return 1; /* lba_capacity is (now) good */
157 return 0; /* lba_capacity value may be bad */
161 * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
162 * using LBA if supported, or CHS otherwise, to address sectors.
164 static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block)
166 ide_hwif_t *hwif = HWIF(drive);
167 unsigned int dma = drive->using_dma;
168 u8 lba48 = (drive->addressing == 1) ? 1 : 0;
169 task_ioreg_t command = WIN_NOP;
170 ata_nsector_t nsectors;
172 nsectors.all = (u16) rq->nr_sectors;
174 if (hwif->no_lba48_dma && lba48 && dma) {
175 if (block + rq->nr_sectors > 1ULL << 28)
176 dma = 0;
177 else
178 lba48 = 0;
181 if (!dma) {
182 ide_init_sg_cmd(drive, rq);
183 ide_map_sg(drive, rq);
186 if (IDE_CONTROL_REG)
187 hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
189 /* FIXME: SELECT_MASK(drive, 0) ? */
191 if (drive->select.b.lba) {
192 if (lba48) {
193 task_ioreg_t tasklets[10];
195 pr_debug("%s: LBA=0x%012llx\n", drive->name,
196 (unsigned long long)block);
198 tasklets[0] = 0;
199 tasklets[1] = 0;
200 tasklets[2] = nsectors.b.low;
201 tasklets[3] = nsectors.b.high;
202 tasklets[4] = (task_ioreg_t) block;
203 tasklets[5] = (task_ioreg_t) (block>>8);
204 tasklets[6] = (task_ioreg_t) (block>>16);
205 tasklets[7] = (task_ioreg_t) (block>>24);
206 if (sizeof(block) == 4) {
207 tasklets[8] = (task_ioreg_t) 0;
208 tasklets[9] = (task_ioreg_t) 0;
209 } else {
210 tasklets[8] = (task_ioreg_t)((u64)block >> 32);
211 tasklets[9] = (task_ioreg_t)((u64)block >> 40);
213 #ifdef DEBUG
214 printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n",
215 drive->name, tasklets[3], tasklets[2],
216 tasklets[9], tasklets[8], tasklets[7],
217 tasklets[6], tasklets[5], tasklets[4]);
218 #endif
219 hwif->OUTB(tasklets[1], IDE_FEATURE_REG);
220 hwif->OUTB(tasklets[3], IDE_NSECTOR_REG);
221 hwif->OUTB(tasklets[7], IDE_SECTOR_REG);
222 hwif->OUTB(tasklets[8], IDE_LCYL_REG);
223 hwif->OUTB(tasklets[9], IDE_HCYL_REG);
225 hwif->OUTB(tasklets[0], IDE_FEATURE_REG);
226 hwif->OUTB(tasklets[2], IDE_NSECTOR_REG);
227 hwif->OUTB(tasklets[4], IDE_SECTOR_REG);
228 hwif->OUTB(tasklets[5], IDE_LCYL_REG);
229 hwif->OUTB(tasklets[6], IDE_HCYL_REG);
230 hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG);
231 } else {
232 hwif->OUTB(0x00, IDE_FEATURE_REG);
233 hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
234 hwif->OUTB(block, IDE_SECTOR_REG);
235 hwif->OUTB(block>>=8, IDE_LCYL_REG);
236 hwif->OUTB(block>>=8, IDE_HCYL_REG);
237 hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG);
239 } else {
240 unsigned int sect,head,cyl,track;
241 track = (int)block / drive->sect;
242 sect = (int)block % drive->sect + 1;
243 hwif->OUTB(sect, IDE_SECTOR_REG);
244 head = track % drive->head;
245 cyl = track / drive->head;
247 pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
249 hwif->OUTB(0x00, IDE_FEATURE_REG);
250 hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
251 hwif->OUTB(cyl, IDE_LCYL_REG);
252 hwif->OUTB(cyl>>8, IDE_HCYL_REG);
253 hwif->OUTB(head|drive->select.all,IDE_SELECT_REG);
256 if (dma) {
257 if (!hwif->dma_setup(drive)) {
258 if (rq_data_dir(rq)) {
259 command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA;
260 if (drive->vdma)
261 command = lba48 ? WIN_WRITE_EXT: WIN_WRITE;
262 } else {
263 command = lba48 ? WIN_READDMA_EXT : WIN_READDMA;
264 if (drive->vdma)
265 command = lba48 ? WIN_READ_EXT: WIN_READ;
267 hwif->dma_exec_cmd(drive, command);
268 hwif->dma_start(drive);
269 return ide_started;
271 /* fallback to PIO */
272 ide_init_sg_cmd(drive, rq);
275 if (rq_data_dir(rq) == READ) {
277 if (drive->mult_count) {
278 hwif->data_phase = TASKFILE_MULTI_IN;
279 command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD;
280 } else {
281 hwif->data_phase = TASKFILE_IN;
282 command = lba48 ? WIN_READ_EXT : WIN_READ;
285 ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL);
286 return ide_started;
287 } else {
288 if (drive->mult_count) {
289 hwif->data_phase = TASKFILE_MULTI_OUT;
290 command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
291 } else {
292 hwif->data_phase = TASKFILE_OUT;
293 command = lba48 ? WIN_WRITE_EXT : WIN_WRITE;
296 /* FIXME: ->OUTBSYNC ? */
297 hwif->OUTB(command, IDE_COMMAND_REG);
299 return pre_task_out_intr(drive, rq);
304 * 268435455 == 137439 MB or 28bit limit
305 * 320173056 == 163929 MB or 48bit addressing
306 * 1073741822 == 549756 MB or 48bit addressing fake drive
309 static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block)
311 ide_hwif_t *hwif = HWIF(drive);
313 BUG_ON(drive->blocked);
315 if (!blk_fs_request(rq)) {
316 blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
317 ide_end_request(drive, 0, 0);
318 return ide_stopped;
321 ledtrig_ide_activity();
323 pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
324 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
325 (unsigned long long)block, rq->nr_sectors,
326 (unsigned long)rq->buffer);
328 if (hwif->rw_disk)
329 hwif->rw_disk(drive, rq);
331 return __ide_do_rw_disk(drive, rq, block);
335 * Queries for true maximum capacity of the drive.
336 * Returns maximum LBA address (> 0) of the drive, 0 if failed.
338 static unsigned long idedisk_read_native_max_address(ide_drive_t *drive)
340 ide_task_t args;
341 unsigned long addr = 0;
343 /* Create IDE/ATA command request structure */
344 memset(&args, 0, sizeof(ide_task_t));
345 args.tfRegister[IDE_SELECT_OFFSET] = 0x40;
346 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX;
347 args.command_type = IDE_DRIVE_TASK_NO_DATA;
348 args.handler = &task_no_data_intr;
349 /* submit command request */
350 ide_raw_taskfile(drive, &args, NULL);
352 /* if OK, compute maximum address value */
353 if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
354 addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24)
355 | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16)
356 | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8)
357 | ((args.tfRegister[IDE_SECTOR_OFFSET] ));
358 addr++; /* since the return value is (maxlba - 1), we add 1 */
360 return addr;
363 static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive)
365 ide_task_t args;
366 unsigned long long addr = 0;
368 /* Create IDE/ATA command request structure */
369 memset(&args, 0, sizeof(ide_task_t));
371 args.tfRegister[IDE_SELECT_OFFSET] = 0x40;
372 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX_EXT;
373 args.command_type = IDE_DRIVE_TASK_NO_DATA;
374 args.handler = &task_no_data_intr;
375 /* submit command request */
376 ide_raw_taskfile(drive, &args, NULL);
378 /* if OK, compute maximum address value */
379 if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
380 u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) |
381 (args.hobRegister[IDE_LCYL_OFFSET] << 8) |
382 args.hobRegister[IDE_SECTOR_OFFSET];
383 u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) |
384 ((args.tfRegister[IDE_LCYL_OFFSET])<<8) |
385 (args.tfRegister[IDE_SECTOR_OFFSET]);
386 addr = ((__u64)high << 24) | low;
387 addr++; /* since the return value is (maxlba - 1), we add 1 */
389 return addr;
393 * Sets maximum virtual LBA address of the drive.
394 * Returns new maximum virtual LBA address (> 0) or 0 on failure.
396 static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req)
398 ide_task_t args;
399 unsigned long addr_set = 0;
401 addr_req--;
402 /* Create IDE/ATA command request structure */
403 memset(&args, 0, sizeof(ide_task_t));
404 args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff);
405 args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >> 8) & 0xff);
406 args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >> 16) & 0xff);
407 args.tfRegister[IDE_SELECT_OFFSET] = ((addr_req >> 24) & 0x0f) | 0x40;
408 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX;
409 args.command_type = IDE_DRIVE_TASK_NO_DATA;
410 args.handler = &task_no_data_intr;
411 /* submit command request */
412 ide_raw_taskfile(drive, &args, NULL);
413 /* if OK, read new maximum address value */
414 if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
415 addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24)
416 | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16)
417 | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8)
418 | ((args.tfRegister[IDE_SECTOR_OFFSET] ));
419 addr_set++;
421 return addr_set;
424 static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req)
426 ide_task_t args;
427 unsigned long long addr_set = 0;
429 addr_req--;
430 /* Create IDE/ATA command request structure */
431 memset(&args, 0, sizeof(ide_task_t));
432 args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff);
433 args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >>= 8) & 0xff);
434 args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >>= 8) & 0xff);
435 args.tfRegister[IDE_SELECT_OFFSET] = 0x40;
436 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX_EXT;
437 args.hobRegister[IDE_SECTOR_OFFSET] = (addr_req >>= 8) & 0xff;
438 args.hobRegister[IDE_LCYL_OFFSET] = (addr_req >>= 8) & 0xff;
439 args.hobRegister[IDE_HCYL_OFFSET] = (addr_req >>= 8) & 0xff;
440 args.hobRegister[IDE_SELECT_OFFSET] = 0x40;
441 args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80);
442 args.command_type = IDE_DRIVE_TASK_NO_DATA;
443 args.handler = &task_no_data_intr;
444 /* submit command request */
445 ide_raw_taskfile(drive, &args, NULL);
446 /* if OK, compute maximum address value */
447 if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
448 u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) |
449 (args.hobRegister[IDE_LCYL_OFFSET] << 8) |
450 args.hobRegister[IDE_SECTOR_OFFSET];
451 u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) |
452 ((args.tfRegister[IDE_LCYL_OFFSET])<<8) |
453 (args.tfRegister[IDE_SECTOR_OFFSET]);
454 addr_set = ((__u64)high << 24) | low;
455 addr_set++;
457 return addr_set;
460 static unsigned long long sectors_to_MB(unsigned long long n)
462 n <<= 9; /* make it bytes */
463 do_div(n, 1000000); /* make it MB */
464 return n;
468 * Bits 10 of command_set_1 and cfs_enable_1 must be equal,
469 * so on non-buggy drives we need test only one.
470 * However, we should also check whether these fields are valid.
472 static inline int idedisk_supports_hpa(const struct hd_driveid *id)
474 return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
478 * The same here.
480 static inline int idedisk_supports_lba48(const struct hd_driveid *id)
482 return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)
483 && id->lba_capacity_2;
486 static void idedisk_check_hpa(ide_drive_t *drive)
488 unsigned long long capacity, set_max;
489 int lba48 = idedisk_supports_lba48(drive->id);
491 capacity = drive->capacity64;
492 if (lba48)
493 set_max = idedisk_read_native_max_address_ext(drive);
494 else
495 set_max = idedisk_read_native_max_address(drive);
497 if (set_max <= capacity)
498 return;
500 printk(KERN_INFO "%s: Host Protected Area detected.\n"
501 "\tcurrent capacity is %llu sectors (%llu MB)\n"
502 "\tnative capacity is %llu sectors (%llu MB)\n",
503 drive->name,
504 capacity, sectors_to_MB(capacity),
505 set_max, sectors_to_MB(set_max));
507 if (lba48)
508 set_max = idedisk_set_max_address_ext(drive, set_max);
509 else
510 set_max = idedisk_set_max_address(drive, set_max);
511 if (set_max) {
512 drive->capacity64 = set_max;
513 printk(KERN_INFO "%s: Host Protected Area disabled.\n",
514 drive->name);
519 * Compute drive->capacity, the full capacity of the drive
520 * Called with drive->id != NULL.
522 * To compute capacity, this uses either of
524 * 1. CHS value set by user (whatever user sets will be trusted)
525 * 2. LBA value from target drive (require new ATA feature)
526 * 3. LBA value from system BIOS (new one is OK, old one may break)
527 * 4. CHS value from system BIOS (traditional style)
529 * in above order (i.e., if value of higher priority is available,
530 * reset will be ignored).
532 static void init_idedisk_capacity (ide_drive_t *drive)
534 struct hd_driveid *id = drive->id;
536 * If this drive supports the Host Protected Area feature set,
537 * then we may need to change our opinion about the drive's capacity.
539 int hpa = idedisk_supports_hpa(id);
541 if (idedisk_supports_lba48(id)) {
542 /* drive speaks 48-bit LBA */
543 drive->select.b.lba = 1;
544 drive->capacity64 = id->lba_capacity_2;
545 if (hpa)
546 idedisk_check_hpa(drive);
547 } else if ((id->capability & 2) && lba_capacity_is_ok(id)) {
548 /* drive speaks 28-bit LBA */
549 drive->select.b.lba = 1;
550 drive->capacity64 = id->lba_capacity;
551 if (hpa)
552 idedisk_check_hpa(drive);
553 } else {
554 /* drive speaks boring old 28-bit CHS */
555 drive->capacity64 = drive->cyl * drive->head * drive->sect;
559 static sector_t idedisk_capacity (ide_drive_t *drive)
561 return drive->capacity64 - drive->sect0;
564 #ifdef CONFIG_PROC_FS
566 static int smart_enable(ide_drive_t *drive)
568 ide_task_t args;
570 memset(&args, 0, sizeof(ide_task_t));
571 args.tfRegister[IDE_FEATURE_OFFSET] = SMART_ENABLE;
572 args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
573 args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
574 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART;
575 args.command_type = IDE_DRIVE_TASK_NO_DATA;
576 args.handler = &task_no_data_intr;
577 return ide_raw_taskfile(drive, &args, NULL);
580 static int get_smart_values(ide_drive_t *drive, u8 *buf)
582 ide_task_t args;
584 memset(&args, 0, sizeof(ide_task_t));
585 args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_VALUES;
586 args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01;
587 args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
588 args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
589 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART;
590 args.command_type = IDE_DRIVE_TASK_IN;
591 args.data_phase = TASKFILE_IN;
592 args.handler = &task_in_intr;
593 (void) smart_enable(drive);
594 return ide_raw_taskfile(drive, &args, buf);
597 static int get_smart_thresholds(ide_drive_t *drive, u8 *buf)
599 ide_task_t args;
600 memset(&args, 0, sizeof(ide_task_t));
601 args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_THRESHOLDS;
602 args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01;
603 args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
604 args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
605 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART;
606 args.command_type = IDE_DRIVE_TASK_IN;
607 args.data_phase = TASKFILE_IN;
608 args.handler = &task_in_intr;
609 (void) smart_enable(drive);
610 return ide_raw_taskfile(drive, &args, buf);
613 static int proc_idedisk_read_cache
614 (char *page, char **start, off_t off, int count, int *eof, void *data)
616 ide_drive_t *drive = (ide_drive_t *) data;
617 char *out = page;
618 int len;
620 if (drive->id_read)
621 len = sprintf(out,"%i\n", drive->id->buf_size / 2);
622 else
623 len = sprintf(out,"(none)\n");
624 PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
627 static int proc_idedisk_read_capacity
628 (char *page, char **start, off_t off, int count, int *eof, void *data)
630 ide_drive_t*drive = (ide_drive_t *)data;
631 int len;
633 len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive));
634 PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
637 static int proc_idedisk_read_smart_thresholds
638 (char *page, char **start, off_t off, int count, int *eof, void *data)
640 ide_drive_t *drive = (ide_drive_t *)data;
641 int len = 0, i = 0;
643 if (!get_smart_thresholds(drive, page)) {
644 unsigned short *val = (unsigned short *) page;
645 char *out = ((char *)val) + (SECTOR_WORDS * 4);
646 page = out;
647 do {
648 out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
649 val += 1;
650 } while (i < (SECTOR_WORDS * 2));
651 len = out - page;
653 PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
656 static int proc_idedisk_read_smart_values
657 (char *page, char **start, off_t off, int count, int *eof, void *data)
659 ide_drive_t *drive = (ide_drive_t *)data;
660 int len = 0, i = 0;
662 if (!get_smart_values(drive, page)) {
663 unsigned short *val = (unsigned short *) page;
664 char *out = ((char *)val) + (SECTOR_WORDS * 4);
665 page = out;
666 do {
667 out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
668 val += 1;
669 } while (i < (SECTOR_WORDS * 2));
670 len = out - page;
672 PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
675 static ide_proc_entry_t idedisk_proc[] = {
676 { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
677 { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
678 { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
679 { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL },
680 { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL },
681 { NULL, 0, NULL, NULL }
684 #else
686 #define idedisk_proc NULL
688 #endif /* CONFIG_PROC_FS */
690 static void idedisk_prepare_flush(request_queue_t *q, struct request *rq)
692 ide_drive_t *drive = q->queuedata;
694 memset(rq->cmd, 0, sizeof(rq->cmd));
696 if (ide_id_has_flush_cache_ext(drive->id) &&
697 (drive->capacity64 >= (1UL << 28)))
698 rq->cmd[0] = WIN_FLUSH_CACHE_EXT;
699 else
700 rq->cmd[0] = WIN_FLUSH_CACHE;
703 rq->cmd_type = REQ_TYPE_ATA_TASK;
704 rq->cmd_flags |= REQ_SOFTBARRIER;
705 rq->buffer = rq->cmd;
708 static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk,
709 sector_t *error_sector)
711 ide_drive_t *drive = q->queuedata;
712 struct request *rq;
713 int ret;
715 if (!drive->wcache)
716 return 0;
718 rq = blk_get_request(q, WRITE, __GFP_WAIT);
720 idedisk_prepare_flush(q, rq);
722 ret = blk_execute_rq(q, disk, rq, 0);
725 * if we failed and caller wants error offset, get it
727 if (ret && error_sector)
728 *error_sector = ide_get_error_location(drive, rq->cmd);
730 blk_put_request(rq);
731 return ret;
735 * This is tightly woven into the driver->do_special can not touch.
736 * DON'T do it again until a total personality rewrite is committed.
738 static int set_multcount(ide_drive_t *drive, int arg)
740 struct request rq;
742 if (drive->special.b.set_multmode)
743 return -EBUSY;
744 ide_init_drive_cmd (&rq);
745 rq.cmd_type = REQ_TYPE_ATA_CMD;
746 drive->mult_req = arg;
747 drive->special.b.set_multmode = 1;
748 (void) ide_do_drive_cmd (drive, &rq, ide_wait);
749 return (drive->mult_count == arg) ? 0 : -EIO;
752 static int set_nowerr(ide_drive_t *drive, int arg)
754 if (ide_spin_wait_hwgroup(drive))
755 return -EBUSY;
756 drive->nowerr = arg;
757 drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
758 spin_unlock_irq(&ide_lock);
759 return 0;
762 static void update_ordered(ide_drive_t *drive)
764 struct hd_driveid *id = drive->id;
765 unsigned ordered = QUEUE_ORDERED_NONE;
766 prepare_flush_fn *prep_fn = NULL;
767 issue_flush_fn *issue_fn = NULL;
769 if (drive->wcache) {
770 unsigned long long capacity;
771 int barrier;
773 * We must avoid issuing commands a drive does not
774 * understand or we may crash it. We check flush cache
775 * is supported. We also check we have the LBA48 flush
776 * cache if the drive capacity is too large. By this
777 * time we have trimmed the drive capacity if LBA48 is
778 * not available so we don't need to recheck that.
780 capacity = idedisk_capacity(drive);
781 barrier = ide_id_has_flush_cache(id) && !drive->noflush &&
782 (drive->addressing == 0 || capacity <= (1ULL << 28) ||
783 ide_id_has_flush_cache_ext(id));
785 printk(KERN_INFO "%s: cache flushes %ssupported\n",
786 drive->name, barrier ? "" : "not ");
788 if (barrier) {
789 ordered = QUEUE_ORDERED_DRAIN_FLUSH;
790 prep_fn = idedisk_prepare_flush;
791 issue_fn = idedisk_issue_flush;
793 } else
794 ordered = QUEUE_ORDERED_DRAIN;
796 blk_queue_ordered(drive->queue, ordered, prep_fn);
797 blk_queue_issue_flush_fn(drive->queue, issue_fn);
800 static int write_cache(ide_drive_t *drive, int arg)
802 ide_task_t args;
803 int err = 1;
805 if (ide_id_has_flush_cache(drive->id)) {
806 memset(&args, 0, sizeof(ide_task_t));
807 args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ?
808 SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
809 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES;
810 args.command_type = IDE_DRIVE_TASK_NO_DATA;
811 args.handler = &task_no_data_intr;
812 err = ide_raw_taskfile(drive, &args, NULL);
813 if (err == 0)
814 drive->wcache = arg;
817 update_ordered(drive);
819 return err;
822 static int do_idedisk_flushcache (ide_drive_t *drive)
824 ide_task_t args;
826 memset(&args, 0, sizeof(ide_task_t));
827 if (ide_id_has_flush_cache_ext(drive->id))
828 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE_EXT;
829 else
830 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE;
831 args.command_type = IDE_DRIVE_TASK_NO_DATA;
832 args.handler = &task_no_data_intr;
833 return ide_raw_taskfile(drive, &args, NULL);
836 static int set_acoustic (ide_drive_t *drive, int arg)
838 ide_task_t args;
840 memset(&args, 0, sizeof(ide_task_t));
841 args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM :
842 SETFEATURES_DIS_AAM;
843 args.tfRegister[IDE_NSECTOR_OFFSET] = arg;
844 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES;
845 args.command_type = IDE_DRIVE_TASK_NO_DATA;
846 args.handler = &task_no_data_intr;
847 ide_raw_taskfile(drive, &args, NULL);
848 drive->acoustic = arg;
849 return 0;
853 * drive->addressing:
854 * 0: 28-bit
855 * 1: 48-bit
856 * 2: 48-bit capable doing 28-bit
858 static int set_lba_addressing(ide_drive_t *drive, int arg)
860 drive->addressing = 0;
862 if (HWIF(drive)->no_lba48)
863 return 0;
865 if (!idedisk_supports_lba48(drive->id))
866 return -EIO;
867 drive->addressing = arg;
868 return 0;
871 static void idedisk_add_settings(ide_drive_t *drive)
873 struct hd_driveid *id = drive->id;
875 ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL);
876 ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
877 ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
878 ide_add_setting(drive, "address", SETTING_RW, HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, TYPE_INTA, 0, 2, 1, 1, &drive->addressing, set_lba_addressing);
879 ide_add_setting(drive, "bswap", SETTING_READ, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL);
880 ide_add_setting(drive, "multcount", id ? SETTING_RW : SETTING_READ, HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, TYPE_BYTE, 0, id ? id->max_multsect : 0, 1, 1, &drive->mult_count, set_multcount);
881 ide_add_setting(drive, "nowerr", SETTING_RW, HDIO_GET_NOWERR, HDIO_SET_NOWERR, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr);
882 ide_add_setting(drive, "lun", SETTING_RW, -1, -1, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL);
883 ide_add_setting(drive, "wcache", SETTING_RW, HDIO_GET_WCACHE, HDIO_SET_WCACHE, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache);
884 ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic);
885 ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL);
886 ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL);
889 static void idedisk_setup (ide_drive_t *drive)
891 struct hd_driveid *id = drive->id;
892 unsigned long long capacity;
894 idedisk_add_settings(drive);
896 if (drive->id_read == 0)
897 return;
899 if (drive->removable) {
901 * Removable disks (eg. SYQUEST); ignore 'WD' drives
903 if (id->model[0] != 'W' || id->model[1] != 'D') {
904 drive->doorlocking = 1;
908 (void)set_lba_addressing(drive, 1);
910 if (drive->addressing == 1) {
911 ide_hwif_t *hwif = HWIF(drive);
912 int max_s = 2048;
914 if (max_s > hwif->rqsize)
915 max_s = hwif->rqsize;
917 blk_queue_max_sectors(drive->queue, max_s);
920 printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2);
922 /* calculate drive capacity, and select LBA if possible */
923 init_idedisk_capacity (drive);
925 /* limit drive capacity to 137GB if LBA48 cannot be used */
926 if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) {
927 printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
928 "%llu sectors (%llu MB)\n",
929 drive->name, (unsigned long long)drive->capacity64,
930 sectors_to_MB(drive->capacity64));
931 drive->capacity64 = 1ULL << 28;
934 if (drive->hwif->no_lba48_dma && drive->addressing) {
935 if (drive->capacity64 > 1ULL << 28) {
936 printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will"
937 " be used for accessing sectors > %u\n",
938 drive->name, 1 << 28);
939 } else
940 drive->addressing = 0;
944 * if possible, give fdisk access to more of the drive,
945 * by correcting bios_cyls:
947 capacity = idedisk_capacity (drive);
948 if (!drive->forced_geom) {
950 if (idedisk_supports_lba48(drive->id)) {
951 /* compatibility */
952 drive->bios_sect = 63;
953 drive->bios_head = 255;
956 if (drive->bios_sect && drive->bios_head) {
957 unsigned int cap0 = capacity; /* truncate to 32 bits */
958 unsigned int cylsz, cyl;
960 if (cap0 != capacity)
961 drive->bios_cyl = 65535;
962 else {
963 cylsz = drive->bios_sect * drive->bios_head;
964 cyl = cap0 / cylsz;
965 if (cyl > 65535)
966 cyl = 65535;
967 if (cyl > drive->bios_cyl)
968 drive->bios_cyl = cyl;
972 printk(KERN_INFO "%s: %llu sectors (%llu MB)",
973 drive->name, capacity, sectors_to_MB(capacity));
975 /* Only print cache size when it was specified */
976 if (id->buf_size)
977 printk (" w/%dKiB Cache", id->buf_size/2);
979 printk(", CHS=%d/%d/%d",
980 drive->bios_cyl, drive->bios_head, drive->bios_sect);
981 if (drive->using_dma)
982 ide_dma_verbose(drive);
983 printk("\n");
985 /* write cache enabled? */
986 if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
987 drive->wcache = 1;
989 write_cache(drive, 1);
992 static void ide_cacheflush_p(ide_drive_t *drive)
994 if (!drive->wcache || !ide_id_has_flush_cache(drive->id))
995 return;
997 if (do_idedisk_flushcache(drive))
998 printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
1001 static void ide_disk_remove(ide_drive_t *drive)
1003 struct ide_disk_obj *idkp = drive->driver_data;
1004 struct gendisk *g = idkp->disk;
1006 ide_unregister_subdriver(drive, idkp->driver);
1008 del_gendisk(g);
1010 ide_cacheflush_p(drive);
1012 ide_disk_put(idkp);
1015 static void ide_disk_release(struct kref *kref)
1017 struct ide_disk_obj *idkp = to_ide_disk(kref);
1018 ide_drive_t *drive = idkp->drive;
1019 struct gendisk *g = idkp->disk;
1021 drive->driver_data = NULL;
1022 g->private_data = NULL;
1023 put_disk(g);
1024 kfree(idkp);
1027 static int ide_disk_probe(ide_drive_t *drive);
1029 static void ide_device_shutdown(ide_drive_t *drive)
1031 #ifdef CONFIG_ALPHA
1032 /* On Alpha, halt(8) doesn't actually turn the machine off,
1033 it puts you into the sort of firmware monitor. Typically,
1034 it's used to boot another kernel image, so it's not much
1035 different from reboot(8). Therefore, we don't need to
1036 spin down the disk in this case, especially since Alpha
1037 firmware doesn't handle disks in standby mode properly.
1038 On the other hand, it's reasonably safe to turn the power
1039 off when the shutdown process reaches the firmware prompt,
1040 as the firmware initialization takes rather long time -
1041 at least 10 seconds, which should be sufficient for
1042 the disk to expire its write cache. */
1043 if (system_state != SYSTEM_POWER_OFF) {
1044 #else
1045 if (system_state == SYSTEM_RESTART) {
1046 #endif
1047 ide_cacheflush_p(drive);
1048 return;
1051 printk("Shutdown: %s\n", drive->name);
1052 drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
1055 static ide_driver_t idedisk_driver = {
1056 .gen_driver = {
1057 .owner = THIS_MODULE,
1058 .name = "ide-disk",
1059 .bus = &ide_bus_type,
1061 .probe = ide_disk_probe,
1062 .remove = ide_disk_remove,
1063 .shutdown = ide_device_shutdown,
1064 .version = IDEDISK_VERSION,
1065 .media = ide_disk,
1066 .supports_dsc_overlap = 0,
1067 .do_request = ide_do_rw_disk,
1068 .end_request = ide_end_request,
1069 .error = __ide_error,
1070 .abort = __ide_abort,
1071 .proc = idedisk_proc,
1074 static int idedisk_open(struct inode *inode, struct file *filp)
1076 struct gendisk *disk = inode->i_bdev->bd_disk;
1077 struct ide_disk_obj *idkp;
1078 ide_drive_t *drive;
1080 if (!(idkp = ide_disk_get(disk)))
1081 return -ENXIO;
1083 drive = idkp->drive;
1085 idkp->openers++;
1087 if (drive->removable && idkp->openers == 1) {
1088 ide_task_t args;
1089 memset(&args, 0, sizeof(ide_task_t));
1090 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK;
1091 args.command_type = IDE_DRIVE_TASK_NO_DATA;
1092 args.handler = &task_no_data_intr;
1093 check_disk_change(inode->i_bdev);
1095 * Ignore the return code from door_lock,
1096 * since the open() has already succeeded,
1097 * and the door_lock is irrelevant at this point.
1099 if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
1100 drive->doorlocking = 0;
1102 return 0;
1105 static int idedisk_release(struct inode *inode, struct file *filp)
1107 struct gendisk *disk = inode->i_bdev->bd_disk;
1108 struct ide_disk_obj *idkp = ide_disk_g(disk);
1109 ide_drive_t *drive = idkp->drive;
1111 if (idkp->openers == 1)
1112 ide_cacheflush_p(drive);
1114 if (drive->removable && idkp->openers == 1) {
1115 ide_task_t args;
1116 memset(&args, 0, sizeof(ide_task_t));
1117 args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK;
1118 args.command_type = IDE_DRIVE_TASK_NO_DATA;
1119 args.handler = &task_no_data_intr;
1120 if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
1121 drive->doorlocking = 0;
1124 idkp->openers--;
1126 ide_disk_put(idkp);
1128 return 0;
1131 static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1133 struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
1134 ide_drive_t *drive = idkp->drive;
1136 geo->heads = drive->bios_head;
1137 geo->sectors = drive->bios_sect;
1138 geo->cylinders = (u16)drive->bios_cyl; /* truncate */
1139 return 0;
1142 static int idedisk_ioctl(struct inode *inode, struct file *file,
1143 unsigned int cmd, unsigned long arg)
1145 struct block_device *bdev = inode->i_bdev;
1146 struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
1147 return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg);
1150 static int idedisk_media_changed(struct gendisk *disk)
1152 struct ide_disk_obj *idkp = ide_disk_g(disk);
1153 ide_drive_t *drive = idkp->drive;
1155 /* do not scan partitions twice if this is a removable device */
1156 if (drive->attach) {
1157 drive->attach = 0;
1158 return 0;
1160 /* if removable, always assume it was changed */
1161 return drive->removable;
1164 static int idedisk_revalidate_disk(struct gendisk *disk)
1166 struct ide_disk_obj *idkp = ide_disk_g(disk);
1167 set_capacity(disk, idedisk_capacity(idkp->drive));
1168 return 0;
1171 static struct block_device_operations idedisk_ops = {
1172 .owner = THIS_MODULE,
1173 .open = idedisk_open,
1174 .release = idedisk_release,
1175 .ioctl = idedisk_ioctl,
1176 .getgeo = idedisk_getgeo,
1177 .media_changed = idedisk_media_changed,
1178 .revalidate_disk= idedisk_revalidate_disk
1181 MODULE_DESCRIPTION("ATA DISK Driver");
1183 static int ide_disk_probe(ide_drive_t *drive)
1185 struct ide_disk_obj *idkp;
1186 struct gendisk *g;
1188 /* strstr("foo", "") is non-NULL */
1189 if (!strstr("ide-disk", drive->driver_req))
1190 goto failed;
1191 if (!drive->present)
1192 goto failed;
1193 if (drive->media != ide_disk)
1194 goto failed;
1196 idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
1197 if (!idkp)
1198 goto failed;
1200 g = alloc_disk_node(1 << PARTN_BITS,
1201 hwif_to_node(drive->hwif));
1202 if (!g)
1203 goto out_free_idkp;
1205 ide_init_disk(g, drive);
1207 ide_register_subdriver(drive, &idedisk_driver);
1209 kref_init(&idkp->kref);
1211 idkp->drive = drive;
1212 idkp->driver = &idedisk_driver;
1213 idkp->disk = g;
1215 g->private_data = &idkp->driver;
1217 drive->driver_data = idkp;
1219 idedisk_setup(drive);
1220 if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
1221 printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
1222 drive->name, drive->head);
1223 drive->attach = 0;
1224 } else
1225 drive->attach = 1;
1227 g->minors = 1 << PARTN_BITS;
1228 g->driverfs_dev = &drive->gendev;
1229 g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
1230 set_capacity(g, idedisk_capacity(drive));
1231 g->fops = &idedisk_ops;
1232 add_disk(g);
1233 return 0;
1235 out_free_idkp:
1236 kfree(idkp);
1237 failed:
1238 return -ENODEV;
1241 static void __exit idedisk_exit (void)
1243 driver_unregister(&idedisk_driver.gen_driver);
1246 static int __init idedisk_init(void)
1248 return driver_register(&idedisk_driver.gen_driver);
1251 MODULE_ALIAS("ide:*m-disk*");
1252 module_init(idedisk_init);
1253 module_exit(idedisk_exit);
1254 MODULE_LICENSE("GPL");