[ARM] 3806/2: S3C2412: Fix GPIO VA when only S3C2412 selected
[linux-2.6/mini2440.git] / arch / s390 / mm / fault.c
blob7cd82575813d1c7be34a85b109f75e1ff787b482
1 /*
2 * arch/s390/mm/fault.c
4 * S390 version
5 * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
6 * Author(s): Hartmut Penner (hp@de.ibm.com)
7 * Ulrich Weigand (uweigand@de.ibm.com)
9 * Derived from "arch/i386/mm/fault.c"
10 * Copyright (C) 1995 Linus Torvalds
13 #include <linux/signal.h>
14 #include <linux/sched.h>
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/string.h>
18 #include <linux/types.h>
19 #include <linux/ptrace.h>
20 #include <linux/mman.h>
21 #include <linux/mm.h>
22 #include <linux/smp.h>
23 #include <linux/smp_lock.h>
24 #include <linux/init.h>
25 #include <linux/console.h>
26 #include <linux/module.h>
27 #include <linux/hardirq.h>
29 #include <asm/system.h>
30 #include <asm/uaccess.h>
31 #include <asm/pgtable.h>
33 #ifndef CONFIG_64BIT
34 #define __FAIL_ADDR_MASK 0x7ffff000
35 #define __FIXUP_MASK 0x7fffffff
36 #define __SUBCODE_MASK 0x0200
37 #define __PF_RES_FIELD 0ULL
38 #else /* CONFIG_64BIT */
39 #define __FAIL_ADDR_MASK -4096L
40 #define __FIXUP_MASK ~0L
41 #define __SUBCODE_MASK 0x0600
42 #define __PF_RES_FIELD 0x8000000000000000ULL
43 #endif /* CONFIG_64BIT */
45 #ifdef CONFIG_SYSCTL
46 extern int sysctl_userprocess_debug;
47 #endif
49 extern void die(const char *,struct pt_regs *,long);
51 extern spinlock_t timerlist_lock;
54 * Unlock any spinlocks which will prevent us from getting the
55 * message out (timerlist_lock is acquired through the
56 * console unblank code)
58 void bust_spinlocks(int yes)
60 if (yes) {
61 oops_in_progress = 1;
62 } else {
63 int loglevel_save = console_loglevel;
64 console_unblank();
65 oops_in_progress = 0;
67 * OK, the message is on the console. Now we call printk()
68 * without oops_in_progress set so that printk will give klogd
69 * a poke. Hold onto your hats...
71 console_loglevel = 15;
72 printk(" ");
73 console_loglevel = loglevel_save;
78 * Check which address space is addressed by the access
79 * register in S390_lowcore.exc_access_id.
80 * Returns 1 for user space and 0 for kernel space.
82 static int __check_access_register(struct pt_regs *regs, int error_code)
84 int areg = S390_lowcore.exc_access_id;
86 if (areg == 0)
87 /* Access via access register 0 -> kernel address */
88 return 0;
89 save_access_regs(current->thread.acrs);
90 if (regs && areg < NUM_ACRS && current->thread.acrs[areg] <= 1)
92 * access register contains 0 -> kernel address,
93 * access register contains 1 -> user space address
95 return current->thread.acrs[areg];
97 /* Something unhealthy was done with the access registers... */
98 die("page fault via unknown access register", regs, error_code);
99 do_exit(SIGKILL);
100 return 0;
104 * Check which address space the address belongs to.
105 * Returns 1 for user space and 0 for kernel space.
107 static inline int check_user_space(struct pt_regs *regs, int error_code)
110 * The lowest two bits of S390_lowcore.trans_exc_code indicate
111 * which paging table was used:
112 * 0: Primary Segment Table Descriptor
113 * 1: STD determined via access register
114 * 2: Secondary Segment Table Descriptor
115 * 3: Home Segment Table Descriptor
117 int descriptor = S390_lowcore.trans_exc_code & 3;
118 if (unlikely(descriptor == 1))
119 return __check_access_register(regs, error_code);
120 if (descriptor == 2)
121 return current->thread.mm_segment.ar4;
122 return descriptor != 0;
126 * Send SIGSEGV to task. This is an external routine
127 * to keep the stack usage of do_page_fault small.
129 static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
130 int si_code, unsigned long address)
132 struct siginfo si;
134 #if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG)
135 #if defined(CONFIG_SYSCTL)
136 if (sysctl_userprocess_debug)
137 #endif
139 printk("User process fault: interruption code 0x%lX\n",
140 error_code);
141 printk("failing address: %lX\n", address);
142 show_regs(regs);
144 #endif
145 si.si_signo = SIGSEGV;
146 si.si_code = si_code;
147 si.si_addr = (void __user *) address;
148 force_sig_info(SIGSEGV, &si, current);
152 * This routine handles page faults. It determines the address,
153 * and the problem, and then passes it off to one of the appropriate
154 * routines.
156 * error_code:
157 * 04 Protection -> Write-Protection (suprression)
158 * 10 Segment translation -> Not present (nullification)
159 * 11 Page translation -> Not present (nullification)
160 * 3b Region third trans. -> Not present (nullification)
162 static inline void
163 do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
165 struct task_struct *tsk;
166 struct mm_struct *mm;
167 struct vm_area_struct * vma;
168 unsigned long address;
169 int user_address;
170 const struct exception_table_entry *fixup;
171 int si_code = SEGV_MAPERR;
173 tsk = current;
174 mm = tsk->mm;
177 * Check for low-address protection. This needs to be treated
178 * as a special case because the translation exception code
179 * field is not guaranteed to contain valid data in this case.
181 if (is_protection && !(S390_lowcore.trans_exc_code & 4)) {
183 /* Low-address protection hit in kernel mode means
184 NULL pointer write access in kernel mode. */
185 if (!(regs->psw.mask & PSW_MASK_PSTATE)) {
186 address = 0;
187 user_address = 0;
188 goto no_context;
191 /* Low-address protection hit in user mode 'cannot happen'. */
192 die ("Low-address protection", regs, error_code);
193 do_exit(SIGKILL);
197 * get the failing address
198 * more specific the segment and page table portion of
199 * the address
201 address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
202 user_address = check_user_space(regs, error_code);
205 * Verify that the fault happened in user space, that
206 * we are not in an interrupt and that there is a
207 * user context.
209 if (user_address == 0 || in_atomic() || !mm)
210 goto no_context;
213 * When we get here, the fault happened in the current
214 * task's user address space, so we can switch on the
215 * interrupts again and then search the VMAs
217 local_irq_enable();
219 down_read(&mm->mmap_sem);
221 vma = find_vma(mm, address);
222 if (!vma)
223 goto bad_area;
224 if (vma->vm_start <= address)
225 goto good_area;
226 if (!(vma->vm_flags & VM_GROWSDOWN))
227 goto bad_area;
228 if (expand_stack(vma, address))
229 goto bad_area;
231 * Ok, we have a good vm_area for this memory access, so
232 * we can handle it..
234 good_area:
235 si_code = SEGV_ACCERR;
236 if (!is_protection) {
237 /* page not present, check vm flags */
238 if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
239 goto bad_area;
240 } else {
241 if (!(vma->vm_flags & VM_WRITE))
242 goto bad_area;
245 survive:
247 * If for any reason at all we couldn't handle the fault,
248 * make sure we exit gracefully rather than endlessly redo
249 * the fault.
251 switch (handle_mm_fault(mm, vma, address, is_protection)) {
252 case VM_FAULT_MINOR:
253 tsk->min_flt++;
254 break;
255 case VM_FAULT_MAJOR:
256 tsk->maj_flt++;
257 break;
258 case VM_FAULT_SIGBUS:
259 goto do_sigbus;
260 case VM_FAULT_OOM:
261 goto out_of_memory;
262 default:
263 BUG();
266 up_read(&mm->mmap_sem);
268 * The instruction that caused the program check will
269 * be repeated. Don't signal single step via SIGTRAP.
271 clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
272 return;
275 * Something tried to access memory that isn't in our memory map..
276 * Fix it, but check if it's kernel or user first..
278 bad_area:
279 up_read(&mm->mmap_sem);
281 /* User mode accesses just cause a SIGSEGV */
282 if (regs->psw.mask & PSW_MASK_PSTATE) {
283 tsk->thread.prot_addr = address;
284 tsk->thread.trap_no = error_code;
285 do_sigsegv(regs, error_code, si_code, address);
286 return;
289 no_context:
290 /* Are we prepared to handle this kernel fault? */
291 fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK);
292 if (fixup) {
293 regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
294 return;
298 * Oops. The kernel tried to access some bad page. We'll have to
299 * terminate things with extreme prejudice.
301 if (user_address == 0)
302 printk(KERN_ALERT "Unable to handle kernel pointer dereference"
303 " at virtual kernel address %p\n", (void *)address);
304 else
305 printk(KERN_ALERT "Unable to handle kernel paging request"
306 " at virtual user address %p\n", (void *)address);
308 die("Oops", regs, error_code);
309 do_exit(SIGKILL);
313 * We ran out of memory, or some other thing happened to us that made
314 * us unable to handle the page fault gracefully.
316 out_of_memory:
317 up_read(&mm->mmap_sem);
318 if (tsk->pid == 1) {
319 yield();
320 goto survive;
322 printk("VM: killing process %s\n", tsk->comm);
323 if (regs->psw.mask & PSW_MASK_PSTATE)
324 do_exit(SIGKILL);
325 goto no_context;
327 do_sigbus:
328 up_read(&mm->mmap_sem);
331 * Send a sigbus, regardless of whether we were in kernel
332 * or user mode.
334 tsk->thread.prot_addr = address;
335 tsk->thread.trap_no = error_code;
336 force_sig(SIGBUS, tsk);
338 /* Kernel mode? Handle exceptions or die */
339 if (!(regs->psw.mask & PSW_MASK_PSTATE))
340 goto no_context;
343 void do_protection_exception(struct pt_regs *regs, unsigned long error_code)
345 regs->psw.addr -= (error_code >> 16);
346 do_exception(regs, 4, 1);
349 void do_dat_exception(struct pt_regs *regs, unsigned long error_code)
351 do_exception(regs, error_code & 0xff, 0);
354 #ifdef CONFIG_PFAULT
356 * 'pfault' pseudo page faults routines.
358 static int pfault_disable = 0;
360 static int __init nopfault(char *str)
362 pfault_disable = 1;
363 return 1;
366 __setup("nopfault", nopfault);
368 typedef struct {
369 __u16 refdiagc;
370 __u16 reffcode;
371 __u16 refdwlen;
372 __u16 refversn;
373 __u64 refgaddr;
374 __u64 refselmk;
375 __u64 refcmpmk;
376 __u64 reserved;
377 } __attribute__ ((packed)) pfault_refbk_t;
379 int pfault_init(void)
381 pfault_refbk_t refbk =
382 { 0x258, 0, 5, 2, __LC_CURRENT, 1ULL << 48, 1ULL << 48,
383 __PF_RES_FIELD };
384 int rc;
386 if (pfault_disable)
387 return -1;
388 __asm__ __volatile__(
389 " diag %1,%0,0x258\n"
390 "0: j 2f\n"
391 "1: la %0,8\n"
392 "2:\n"
393 ".section __ex_table,\"a\"\n"
394 " .align 4\n"
395 #ifndef CONFIG_64BIT
396 " .long 0b,1b\n"
397 #else /* CONFIG_64BIT */
398 " .quad 0b,1b\n"
399 #endif /* CONFIG_64BIT */
400 ".previous"
401 : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" );
402 __ctl_set_bit(0, 9);
403 return rc;
406 void pfault_fini(void)
408 pfault_refbk_t refbk =
409 { 0x258, 1, 5, 2, 0ULL, 0ULL, 0ULL, 0ULL };
411 if (pfault_disable)
412 return;
413 __ctl_clear_bit(0,9);
414 __asm__ __volatile__(
415 " diag %0,0,0x258\n"
416 "0:\n"
417 ".section __ex_table,\"a\"\n"
418 " .align 4\n"
419 #ifndef CONFIG_64BIT
420 " .long 0b,0b\n"
421 #else /* CONFIG_64BIT */
422 " .quad 0b,0b\n"
423 #endif /* CONFIG_64BIT */
424 ".previous"
425 : : "a" (&refbk), "m" (refbk) : "cc" );
428 asmlinkage void
429 pfault_interrupt(struct pt_regs *regs, __u16 error_code)
431 struct task_struct *tsk;
432 __u16 subcode;
435 * Get the external interruption subcode & pfault
436 * initial/completion signal bit. VM stores this
437 * in the 'cpu address' field associated with the
438 * external interrupt.
440 subcode = S390_lowcore.cpu_addr;
441 if ((subcode & 0xff00) != __SUBCODE_MASK)
442 return;
445 * Get the token (= address of the task structure of the affected task).
447 tsk = *(struct task_struct **) __LC_PFAULT_INTPARM;
449 if (subcode & 0x0080) {
450 /* signal bit is set -> a page has been swapped in by VM */
451 if (xchg(&tsk->thread.pfault_wait, -1) != 0) {
452 /* Initial interrupt was faster than the completion
453 * interrupt. pfault_wait is valid. Set pfault_wait
454 * back to zero and wake up the process. This can
455 * safely be done because the task is still sleeping
456 * and can't produce new pfaults. */
457 tsk->thread.pfault_wait = 0;
458 wake_up_process(tsk);
459 put_task_struct(tsk);
461 } else {
462 /* signal bit not set -> a real page is missing. */
463 get_task_struct(tsk);
464 set_task_state(tsk, TASK_UNINTERRUPTIBLE);
465 if (xchg(&tsk->thread.pfault_wait, 1) != 0) {
466 /* Completion interrupt was faster than the initial
467 * interrupt (swapped in a -1 for pfault_wait). Set
468 * pfault_wait back to zero and exit. This can be
469 * done safely because tsk is running in kernel
470 * mode and can't produce new pfaults. */
471 tsk->thread.pfault_wait = 0;
472 set_task_state(tsk, TASK_RUNNING);
473 put_task_struct(tsk);
474 } else
475 set_tsk_need_resched(tsk);
478 #endif