1 /*******************************************************************************
3 Intel 10 Gigabit PCI Express Linux driver
4 Copyright(c) 1999 - 2009 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 #include <linux/pci.h>
29 #include <linux/delay.h>
30 #include <linux/sched.h>
32 #include "ixgbe_common.h"
33 #include "ixgbe_phy.h"
35 static void ixgbe_i2c_start(struct ixgbe_hw
*hw
);
36 static void ixgbe_i2c_stop(struct ixgbe_hw
*hw
);
37 static s32
ixgbe_clock_in_i2c_byte(struct ixgbe_hw
*hw
, u8
*data
);
38 static s32
ixgbe_clock_out_i2c_byte(struct ixgbe_hw
*hw
, u8 data
);
39 static s32
ixgbe_get_i2c_ack(struct ixgbe_hw
*hw
);
40 static s32
ixgbe_clock_in_i2c_bit(struct ixgbe_hw
*hw
, bool *data
);
41 static s32
ixgbe_clock_out_i2c_bit(struct ixgbe_hw
*hw
, bool data
);
42 static s32
ixgbe_raise_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
);
43 static void ixgbe_lower_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
);
44 static s32
ixgbe_set_i2c_data(struct ixgbe_hw
*hw
, u32
*i2cctl
, bool data
);
45 static bool ixgbe_get_i2c_data(u32
*i2cctl
);
46 static void ixgbe_i2c_bus_clear(struct ixgbe_hw
*hw
);
47 static enum ixgbe_phy_type
ixgbe_get_phy_type_from_id(u32 phy_id
);
48 static s32
ixgbe_get_phy_id(struct ixgbe_hw
*hw
);
51 * ixgbe_identify_phy_generic - Get physical layer module
52 * @hw: pointer to hardware structure
54 * Determines the physical layer module found on the current adapter.
56 s32
ixgbe_identify_phy_generic(struct ixgbe_hw
*hw
)
58 s32 status
= IXGBE_ERR_PHY_ADDR_INVALID
;
61 if (hw
->phy
.type
== ixgbe_phy_unknown
) {
62 for (phy_addr
= 0; phy_addr
< IXGBE_MAX_PHY_ADDR
; phy_addr
++) {
63 if (mdio45_probe(&hw
->phy
.mdio
, phy_addr
) == 0) {
66 ixgbe_get_phy_type_from_id(hw
->phy
.id
);
79 * ixgbe_get_phy_id - Get the phy type
80 * @hw: pointer to hardware structure
83 static s32
ixgbe_get_phy_id(struct ixgbe_hw
*hw
)
89 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_DEVID1
, MDIO_MMD_PMAPMD
,
93 hw
->phy
.id
= (u32
)(phy_id_high
<< 16);
94 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_DEVID2
, MDIO_MMD_PMAPMD
,
96 hw
->phy
.id
|= (u32
)(phy_id_low
& IXGBE_PHY_REVISION_MASK
);
97 hw
->phy
.revision
= (u32
)(phy_id_low
& ~IXGBE_PHY_REVISION_MASK
);
103 * ixgbe_get_phy_type_from_id - Get the phy type
104 * @hw: pointer to hardware structure
107 static enum ixgbe_phy_type
ixgbe_get_phy_type_from_id(u32 phy_id
)
109 enum ixgbe_phy_type phy_type
;
113 phy_type
= ixgbe_phy_tn
;
116 phy_type
= ixgbe_phy_qt
;
119 phy_type
= ixgbe_phy_nl
;
122 phy_type
= ixgbe_phy_unknown
;
130 * ixgbe_reset_phy_generic - Performs a PHY reset
131 * @hw: pointer to hardware structure
133 s32
ixgbe_reset_phy_generic(struct ixgbe_hw
*hw
)
136 * Perform soft PHY reset to the PHY_XS.
137 * This will cause a soft reset to the PHY
139 return hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
,
144 * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
145 * @hw: pointer to hardware structure
146 * @reg_addr: 32 bit address of PHY register to read
147 * @phy_data: Pointer to read data from PHY register
149 s32
ixgbe_read_phy_reg_generic(struct ixgbe_hw
*hw
, u32 reg_addr
,
150 u32 device_type
, u16
*phy_data
)
158 if (IXGBE_READ_REG(hw
, IXGBE_STATUS
) & IXGBE_STATUS_LAN_ID_1
)
159 gssr
= IXGBE_GSSR_PHY1_SM
;
161 gssr
= IXGBE_GSSR_PHY0_SM
;
163 if (ixgbe_acquire_swfw_sync(hw
, gssr
) != 0)
164 status
= IXGBE_ERR_SWFW_SYNC
;
167 /* Setup and write the address cycle command */
168 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
169 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
170 (hw
->phy
.mdio
.prtad
<< IXGBE_MSCA_PHY_ADDR_SHIFT
) |
171 (IXGBE_MSCA_ADDR_CYCLE
| IXGBE_MSCA_MDI_COMMAND
));
173 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
176 * Check every 10 usec to see if the address cycle completed.
177 * The MDI Command bit will clear when the operation is
180 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
183 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
185 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
189 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
190 hw_dbg(hw
, "PHY address command did not complete.\n");
191 status
= IXGBE_ERR_PHY
;
196 * Address cycle complete, setup and write the read
199 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
200 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
201 (hw
->phy
.mdio
.prtad
<<
202 IXGBE_MSCA_PHY_ADDR_SHIFT
) |
203 (IXGBE_MSCA_READ
| IXGBE_MSCA_MDI_COMMAND
));
205 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
208 * Check every 10 usec to see if the address cycle
209 * completed. The MDI Command bit will clear when the
210 * operation is complete
212 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
215 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
217 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
221 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
222 hw_dbg(hw
, "PHY read command didn't complete\n");
223 status
= IXGBE_ERR_PHY
;
226 * Read operation is complete. Get the data
229 data
= IXGBE_READ_REG(hw
, IXGBE_MSRWD
);
230 data
>>= IXGBE_MSRWD_READ_DATA_SHIFT
;
231 *phy_data
= (u16
)(data
);
235 ixgbe_release_swfw_sync(hw
, gssr
);
242 * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
243 * @hw: pointer to hardware structure
244 * @reg_addr: 32 bit PHY register to write
245 * @device_type: 5 bit device type
246 * @phy_data: Data to write to the PHY register
248 s32
ixgbe_write_phy_reg_generic(struct ixgbe_hw
*hw
, u32 reg_addr
,
249 u32 device_type
, u16 phy_data
)
256 if (IXGBE_READ_REG(hw
, IXGBE_STATUS
) & IXGBE_STATUS_LAN_ID_1
)
257 gssr
= IXGBE_GSSR_PHY1_SM
;
259 gssr
= IXGBE_GSSR_PHY0_SM
;
261 if (ixgbe_acquire_swfw_sync(hw
, gssr
) != 0)
262 status
= IXGBE_ERR_SWFW_SYNC
;
265 /* Put the data in the MDI single read and write data register*/
266 IXGBE_WRITE_REG(hw
, IXGBE_MSRWD
, (u32
)phy_data
);
268 /* Setup and write the address cycle command */
269 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
270 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
271 (hw
->phy
.mdio
.prtad
<< IXGBE_MSCA_PHY_ADDR_SHIFT
) |
272 (IXGBE_MSCA_ADDR_CYCLE
| IXGBE_MSCA_MDI_COMMAND
));
274 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
277 * Check every 10 usec to see if the address cycle completed.
278 * The MDI Command bit will clear when the operation is
281 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
284 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
286 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
290 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
291 hw_dbg(hw
, "PHY address cmd didn't complete\n");
292 status
= IXGBE_ERR_PHY
;
297 * Address cycle complete, setup and write the write
300 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
301 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
302 (hw
->phy
.mdio
.prtad
<<
303 IXGBE_MSCA_PHY_ADDR_SHIFT
) |
304 (IXGBE_MSCA_WRITE
| IXGBE_MSCA_MDI_COMMAND
));
306 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
309 * Check every 10 usec to see if the address cycle
310 * completed. The MDI Command bit will clear when the
311 * operation is complete
313 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
316 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
318 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
322 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
323 hw_dbg(hw
, "PHY address cmd didn't complete\n");
324 status
= IXGBE_ERR_PHY
;
328 ixgbe_release_swfw_sync(hw
, gssr
);
335 * ixgbe_setup_phy_link_generic - Set and restart autoneg
336 * @hw: pointer to hardware structure
338 * Restart autonegotiation and PHY and waits for completion.
340 s32
ixgbe_setup_phy_link_generic(struct ixgbe_hw
*hw
)
342 s32 status
= IXGBE_NOT_IMPLEMENTED
;
344 u32 max_time_out
= 10;
348 * Set advertisement settings in PHY based on autoneg_advertised
349 * settings. If autoneg_advertised = 0, then advertise default values
350 * tnx devices cannot be "forced" to a autoneg 10G and fail. But can
353 hw
->phy
.ops
.read_reg(hw
, MDIO_AN_ADVERTISE
, MDIO_MMD_AN
, &autoneg_reg
);
355 if (hw
->phy
.autoneg_advertised
== IXGBE_LINK_SPEED_1GB_FULL
)
356 autoneg_reg
&= ~MDIO_AN_10GBT_CTRL_ADV10G
;
358 autoneg_reg
|= MDIO_AN_10GBT_CTRL_ADV10G
;
360 hw
->phy
.ops
.write_reg(hw
, MDIO_AN_ADVERTISE
, MDIO_MMD_AN
, autoneg_reg
);
362 /* Restart PHY autonegotiation and wait for completion */
363 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
, MDIO_MMD_AN
, &autoneg_reg
);
365 autoneg_reg
|= MDIO_AN_CTRL1_RESTART
;
367 hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
, MDIO_MMD_AN
, autoneg_reg
);
369 /* Wait for autonegotiation to finish */
370 for (time_out
= 0; time_out
< max_time_out
; time_out
++) {
372 /* Restart PHY autonegotiation and wait for completion */
373 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_STAT1
, MDIO_MMD_AN
,
376 autoneg_reg
&= MDIO_AN_STAT1_COMPLETE
;
377 if (autoneg_reg
== MDIO_AN_STAT1_COMPLETE
) {
383 if (time_out
== max_time_out
)
384 status
= IXGBE_ERR_LINK_SETUP
;
390 * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
391 * @hw: pointer to hardware structure
392 * @speed: new link speed
393 * @autoneg: true if autonegotiation enabled
395 s32
ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw
*hw
,
396 ixgbe_link_speed speed
,
398 bool autoneg_wait_to_complete
)
402 * Clear autoneg_advertised and set new values based on input link
405 hw
->phy
.autoneg_advertised
= 0;
407 if (speed
& IXGBE_LINK_SPEED_10GB_FULL
)
408 hw
->phy
.autoneg_advertised
|= IXGBE_LINK_SPEED_10GB_FULL
;
410 if (speed
& IXGBE_LINK_SPEED_1GB_FULL
)
411 hw
->phy
.autoneg_advertised
|= IXGBE_LINK_SPEED_1GB_FULL
;
413 /* Setup link based on the new speed settings */
414 hw
->phy
.ops
.setup_link(hw
);
420 * ixgbe_reset_phy_nl - Performs a PHY reset
421 * @hw: pointer to hardware structure
423 s32
ixgbe_reset_phy_nl(struct ixgbe_hw
*hw
)
425 u16 phy_offset
, control
, eword
, edata
, block_crc
;
426 bool end_data
= false;
427 u16 list_offset
, data_offset
;
432 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
, &phy_data
);
434 /* reset the PHY and poll for completion */
435 hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
,
436 (phy_data
| MDIO_CTRL1_RESET
));
438 for (i
= 0; i
< 100; i
++) {
439 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
,
441 if ((phy_data
& MDIO_CTRL1_RESET
) == 0)
446 if ((phy_data
& MDIO_CTRL1_RESET
) != 0) {
447 hw_dbg(hw
, "PHY reset did not complete.\n");
448 ret_val
= IXGBE_ERR_PHY
;
452 /* Get init offsets */
453 ret_val
= ixgbe_get_sfp_init_sequence_offsets(hw
, &list_offset
,
458 ret_val
= hw
->eeprom
.ops
.read(hw
, data_offset
, &block_crc
);
462 * Read control word from PHY init contents offset
464 ret_val
= hw
->eeprom
.ops
.read(hw
, data_offset
, &eword
);
465 control
= (eword
& IXGBE_CONTROL_MASK_NL
) >>
466 IXGBE_CONTROL_SHIFT_NL
;
467 edata
= eword
& IXGBE_DATA_MASK_NL
;
471 hw_dbg(hw
, "DELAY: %d MS\n", edata
);
475 hw_dbg(hw
, "DATA: \n");
477 hw
->eeprom
.ops
.read(hw
, data_offset
++,
479 for (i
= 0; i
< edata
; i
++) {
480 hw
->eeprom
.ops
.read(hw
, data_offset
, &eword
);
481 hw
->phy
.ops
.write_reg(hw
, phy_offset
,
482 MDIO_MMD_PMAPMD
, eword
);
483 hw_dbg(hw
, "Wrote %4.4x to %4.4x\n", eword
,
489 case IXGBE_CONTROL_NL
:
491 hw_dbg(hw
, "CONTROL: \n");
492 if (edata
== IXGBE_CONTROL_EOL_NL
) {
495 } else if (edata
== IXGBE_CONTROL_SOL_NL
) {
498 hw_dbg(hw
, "Bad control value\n");
499 ret_val
= IXGBE_ERR_PHY
;
504 hw_dbg(hw
, "Bad control type\n");
505 ret_val
= IXGBE_ERR_PHY
;
515 * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns
517 * @hw: pointer to hardware structure
519 * Searches for and indentifies the SFP module. Assings appropriate PHY type.
521 s32
ixgbe_identify_sfp_module_generic(struct ixgbe_hw
*hw
)
523 s32 status
= IXGBE_ERR_PHY_ADDR_INVALID
;
525 enum ixgbe_sfp_type stored_sfp_type
= hw
->phy
.sfp_type
;
527 u8 comp_codes_1g
= 0;
528 u8 comp_codes_10g
= 0;
529 u8 oui_bytes
[3] = {0, 0, 0};
533 if (hw
->mac
.ops
.get_media_type(hw
) != ixgbe_media_type_fiber
) {
534 hw
->phy
.sfp_type
= ixgbe_sfp_type_not_present
;
535 status
= IXGBE_ERR_SFP_NOT_PRESENT
;
539 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
, IXGBE_SFF_IDENTIFIER
,
542 if (status
== IXGBE_ERR_SFP_NOT_PRESENT
|| status
== IXGBE_ERR_I2C
) {
543 status
= IXGBE_ERR_SFP_NOT_PRESENT
;
544 hw
->phy
.sfp_type
= ixgbe_sfp_type_not_present
;
545 if (hw
->phy
.type
!= ixgbe_phy_nl
) {
547 hw
->phy
.type
= ixgbe_phy_unknown
;
552 if (identifier
== IXGBE_SFF_IDENTIFIER_SFP
) {
553 hw
->phy
.ops
.read_i2c_eeprom(hw
, IXGBE_SFF_1GBE_COMP_CODES
,
555 hw
->phy
.ops
.read_i2c_eeprom(hw
, IXGBE_SFF_10GBE_COMP_CODES
,
557 hw
->phy
.ops
.read_i2c_eeprom(hw
, IXGBE_SFF_CABLE_TECHNOLOGY
,
565 * 3 SFP_DA_CORE0 - 82599-specific
566 * 4 SFP_DA_CORE1 - 82599-specific
567 * 5 SFP_SR/LR_CORE0 - 82599-specific
568 * 6 SFP_SR/LR_CORE1 - 82599-specific
570 if (hw
->mac
.type
== ixgbe_mac_82598EB
) {
571 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
572 hw
->phy
.sfp_type
= ixgbe_sfp_type_da_cu
;
573 else if (comp_codes_10g
& IXGBE_SFF_10GBASESR_CAPABLE
)
574 hw
->phy
.sfp_type
= ixgbe_sfp_type_sr
;
575 else if (comp_codes_10g
& IXGBE_SFF_10GBASELR_CAPABLE
)
576 hw
->phy
.sfp_type
= ixgbe_sfp_type_lr
;
578 hw
->phy
.sfp_type
= ixgbe_sfp_type_unknown
;
579 } else if (hw
->mac
.type
== ixgbe_mac_82599EB
) {
580 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
581 if (hw
->bus
.lan_id
== 0)
583 ixgbe_sfp_type_da_cu_core0
;
586 ixgbe_sfp_type_da_cu_core1
;
587 else if (comp_codes_10g
& IXGBE_SFF_10GBASESR_CAPABLE
)
588 if (hw
->bus
.lan_id
== 0)
590 ixgbe_sfp_type_srlr_core0
;
593 ixgbe_sfp_type_srlr_core1
;
594 else if (comp_codes_10g
& IXGBE_SFF_10GBASELR_CAPABLE
)
595 if (hw
->bus
.lan_id
== 0)
597 ixgbe_sfp_type_srlr_core0
;
600 ixgbe_sfp_type_srlr_core1
;
602 hw
->phy
.sfp_type
= ixgbe_sfp_type_unknown
;
605 if (hw
->phy
.sfp_type
!= stored_sfp_type
)
606 hw
->phy
.sfp_setup_needed
= true;
608 /* Determine if the SFP+ PHY is dual speed or not. */
609 hw
->phy
.multispeed_fiber
= false;
610 if (((comp_codes_1g
& IXGBE_SFF_1GBASESX_CAPABLE
) &&
611 (comp_codes_10g
& IXGBE_SFF_10GBASESR_CAPABLE
)) ||
612 ((comp_codes_1g
& IXGBE_SFF_1GBASELX_CAPABLE
) &&
613 (comp_codes_10g
& IXGBE_SFF_10GBASELR_CAPABLE
)))
614 hw
->phy
.multispeed_fiber
= true;
616 /* Determine PHY vendor */
617 if (hw
->phy
.type
!= ixgbe_phy_nl
) {
618 hw
->phy
.id
= identifier
;
619 hw
->phy
.ops
.read_i2c_eeprom(hw
,
620 IXGBE_SFF_VENDOR_OUI_BYTE0
,
622 hw
->phy
.ops
.read_i2c_eeprom(hw
,
623 IXGBE_SFF_VENDOR_OUI_BYTE1
,
625 hw
->phy
.ops
.read_i2c_eeprom(hw
,
626 IXGBE_SFF_VENDOR_OUI_BYTE2
,
630 ((oui_bytes
[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT
) |
631 (oui_bytes
[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT
) |
632 (oui_bytes
[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT
));
634 switch (vendor_oui
) {
635 case IXGBE_SFF_VENDOR_OUI_TYCO
:
636 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
637 hw
->phy
.type
= ixgbe_phy_tw_tyco
;
639 case IXGBE_SFF_VENDOR_OUI_FTL
:
640 hw
->phy
.type
= ixgbe_phy_sfp_ftl
;
642 case IXGBE_SFF_VENDOR_OUI_AVAGO
:
643 hw
->phy
.type
= ixgbe_phy_sfp_avago
;
645 case IXGBE_SFF_VENDOR_OUI_INTEL
:
646 hw
->phy
.type
= ixgbe_phy_sfp_intel
;
649 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
650 hw
->phy
.type
= ixgbe_phy_tw_unknown
;
652 hw
->phy
.type
= ixgbe_phy_sfp_unknown
;
657 /* All passive DA cables are supported */
658 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
) {
663 /* 1G SFP modules are not supported */
664 if (comp_codes_10g
== 0) {
665 hw
->phy
.type
= ixgbe_phy_sfp_unsupported
;
666 status
= IXGBE_ERR_SFP_NOT_SUPPORTED
;
670 /* Anything else 82598-based is supported */
671 if (hw
->mac
.type
== ixgbe_mac_82598EB
) {
676 /* This is guaranteed to be 82599, no need to check for NULL */
677 hw
->mac
.ops
.get_device_caps(hw
, &enforce_sfp
);
678 if (!(enforce_sfp
& IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP
)) {
679 /* Make sure we're a supported PHY type */
680 if (hw
->phy
.type
== ixgbe_phy_sfp_intel
) {
683 hw_dbg(hw
, "SFP+ module not supported\n");
684 hw
->phy
.type
= ixgbe_phy_sfp_unsupported
;
685 status
= IXGBE_ERR_SFP_NOT_SUPPORTED
;
697 * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see
698 * if it supports a given SFP+ module type, if so it returns the offsets to the
699 * phy init sequence block.
700 * @hw: pointer to hardware structure
701 * @list_offset: offset to the SFP ID list
702 * @data_offset: offset to the SFP data block
704 s32
ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw
*hw
,
710 if (hw
->phy
.sfp_type
== ixgbe_sfp_type_unknown
)
711 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
713 if (hw
->phy
.sfp_type
== ixgbe_sfp_type_not_present
)
714 return IXGBE_ERR_SFP_NOT_PRESENT
;
716 if ((hw
->device_id
== IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM
) &&
717 (hw
->phy
.sfp_type
== ixgbe_sfp_type_da_cu
))
718 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
720 /* Read offset to PHY init contents */
721 hw
->eeprom
.ops
.read(hw
, IXGBE_PHY_INIT_OFFSET_NL
, list_offset
);
723 if ((!*list_offset
) || (*list_offset
== 0xFFFF))
724 return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT
;
726 /* Shift offset to first ID word */
730 * Find the matching SFP ID in the EEPROM
731 * and program the init sequence
733 hw
->eeprom
.ops
.read(hw
, *list_offset
, &sfp_id
);
735 while (sfp_id
!= IXGBE_PHY_INIT_END_NL
) {
736 if (sfp_id
== hw
->phy
.sfp_type
) {
738 hw
->eeprom
.ops
.read(hw
, *list_offset
, data_offset
);
739 if ((!*data_offset
) || (*data_offset
== 0xFFFF)) {
740 hw_dbg(hw
, "SFP+ module not supported\n");
741 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
747 if (hw
->eeprom
.ops
.read(hw
, *list_offset
, &sfp_id
))
748 return IXGBE_ERR_PHY
;
752 if (sfp_id
== IXGBE_PHY_INIT_END_NL
) {
753 hw_dbg(hw
, "No matching SFP+ module found\n");
754 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
761 * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
762 * @hw: pointer to hardware structure
763 * @byte_offset: EEPROM byte offset to read
764 * @eeprom_data: value read
766 * Performs byte read operation to SFP module's EEPROM over I2C interface.
768 s32
ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
771 return hw
->phy
.ops
.read_i2c_byte(hw
, byte_offset
,
772 IXGBE_I2C_EEPROM_DEV_ADDR
,
777 * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
778 * @hw: pointer to hardware structure
779 * @byte_offset: EEPROM byte offset to write
780 * @eeprom_data: value to write
782 * Performs byte write operation to SFP module's EEPROM over I2C interface.
784 s32
ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
787 return hw
->phy
.ops
.write_i2c_byte(hw
, byte_offset
,
788 IXGBE_I2C_EEPROM_DEV_ADDR
,
793 * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
794 * @hw: pointer to hardware structure
795 * @byte_offset: byte offset to read
798 * Performs byte read operation to SFP module's EEPROM over I2C interface at
799 * a specified deivce address.
801 s32
ixgbe_read_i2c_byte_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
802 u8 dev_addr
, u8
*data
)
812 /* Device Address and write indication */
813 status
= ixgbe_clock_out_i2c_byte(hw
, dev_addr
);
817 status
= ixgbe_get_i2c_ack(hw
);
821 status
= ixgbe_clock_out_i2c_byte(hw
, byte_offset
);
825 status
= ixgbe_get_i2c_ack(hw
);
831 /* Device Address and read indication */
832 status
= ixgbe_clock_out_i2c_byte(hw
, (dev_addr
| 0x1));
836 status
= ixgbe_get_i2c_ack(hw
);
840 status
= ixgbe_clock_in_i2c_byte(hw
, data
);
844 status
= ixgbe_clock_out_i2c_bit(hw
, nack
);
852 ixgbe_i2c_bus_clear(hw
);
854 if (retry
< max_retry
)
855 hw_dbg(hw
, "I2C byte read error - Retrying.\n");
857 hw_dbg(hw
, "I2C byte read error.\n");
859 } while (retry
< max_retry
);
865 * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
866 * @hw: pointer to hardware structure
867 * @byte_offset: byte offset to write
868 * @data: value to write
870 * Performs byte write operation to SFP module's EEPROM over I2C interface at
871 * a specified device address.
873 s32
ixgbe_write_i2c_byte_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
874 u8 dev_addr
, u8 data
)
883 status
= ixgbe_clock_out_i2c_byte(hw
, dev_addr
);
887 status
= ixgbe_get_i2c_ack(hw
);
891 status
= ixgbe_clock_out_i2c_byte(hw
, byte_offset
);
895 status
= ixgbe_get_i2c_ack(hw
);
899 status
= ixgbe_clock_out_i2c_byte(hw
, data
);
903 status
= ixgbe_get_i2c_ack(hw
);
911 ixgbe_i2c_bus_clear(hw
);
913 if (retry
< max_retry
)
914 hw_dbg(hw
, "I2C byte write error - Retrying.\n");
916 hw_dbg(hw
, "I2C byte write error.\n");
917 } while (retry
< max_retry
);
923 * ixgbe_i2c_start - Sets I2C start condition
924 * @hw: pointer to hardware structure
926 * Sets I2C start condition (High -> Low on SDA while SCL is High)
928 static void ixgbe_i2c_start(struct ixgbe_hw
*hw
)
930 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
932 /* Start condition must begin with data and clock high */
933 ixgbe_set_i2c_data(hw
, &i2cctl
, 1);
934 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
936 /* Setup time for start condition (4.7us) */
937 udelay(IXGBE_I2C_T_SU_STA
);
939 ixgbe_set_i2c_data(hw
, &i2cctl
, 0);
941 /* Hold time for start condition (4us) */
942 udelay(IXGBE_I2C_T_HD_STA
);
944 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
946 /* Minimum low period of clock is 4.7 us */
947 udelay(IXGBE_I2C_T_LOW
);
952 * ixgbe_i2c_stop - Sets I2C stop condition
953 * @hw: pointer to hardware structure
955 * Sets I2C stop condition (Low -> High on SDA while SCL is High)
957 static void ixgbe_i2c_stop(struct ixgbe_hw
*hw
)
959 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
961 /* Stop condition must begin with data low and clock high */
962 ixgbe_set_i2c_data(hw
, &i2cctl
, 0);
963 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
965 /* Setup time for stop condition (4us) */
966 udelay(IXGBE_I2C_T_SU_STO
);
968 ixgbe_set_i2c_data(hw
, &i2cctl
, 1);
970 /* bus free time between stop and start (4.7us)*/
971 udelay(IXGBE_I2C_T_BUF
);
975 * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
976 * @hw: pointer to hardware structure
977 * @data: data byte to clock in
979 * Clocks in one byte data via I2C data/clock
981 static s32
ixgbe_clock_in_i2c_byte(struct ixgbe_hw
*hw
, u8
*data
)
987 for (i
= 7; i
>= 0; i
--) {
988 status
= ixgbe_clock_in_i2c_bit(hw
, &bit
);
999 * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
1000 * @hw: pointer to hardware structure
1001 * @data: data byte clocked out
1003 * Clocks out one byte data via I2C data/clock
1005 static s32
ixgbe_clock_out_i2c_byte(struct ixgbe_hw
*hw
, u8 data
)
1012 for (i
= 7; i
>= 0; i
--) {
1013 bit
= (data
>> i
) & 0x1;
1014 status
= ixgbe_clock_out_i2c_bit(hw
, bit
);
1020 /* Release SDA line (set high) */
1021 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1022 i2cctl
|= IXGBE_I2C_DATA_OUT
;
1023 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, i2cctl
);
1029 * ixgbe_get_i2c_ack - Polls for I2C ACK
1030 * @hw: pointer to hardware structure
1032 * Clocks in/out one bit via I2C data/clock
1034 static s32
ixgbe_get_i2c_ack(struct ixgbe_hw
*hw
)
1038 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1042 status
= ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1047 /* Minimum high period of clock is 4us */
1048 udelay(IXGBE_I2C_T_HIGH
);
1050 /* Poll for ACK. Note that ACK in I2C spec is
1051 * transition from 1 to 0 */
1052 for (i
= 0; i
< timeout
; i
++) {
1053 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1054 ack
= ixgbe_get_i2c_data(&i2cctl
);
1062 hw_dbg(hw
, "I2C ack was not received.\n");
1063 status
= IXGBE_ERR_I2C
;
1066 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1068 /* Minimum low period of clock is 4.7 us */
1069 udelay(IXGBE_I2C_T_LOW
);
1076 * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
1077 * @hw: pointer to hardware structure
1078 * @data: read data value
1080 * Clocks in one bit via I2C data/clock
1082 static s32
ixgbe_clock_in_i2c_bit(struct ixgbe_hw
*hw
, bool *data
)
1085 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1087 status
= ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1089 /* Minimum high period of clock is 4us */
1090 udelay(IXGBE_I2C_T_HIGH
);
1092 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1093 *data
= ixgbe_get_i2c_data(&i2cctl
);
1095 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1097 /* Minimum low period of clock is 4.7 us */
1098 udelay(IXGBE_I2C_T_LOW
);
1104 * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
1105 * @hw: pointer to hardware structure
1106 * @data: data value to write
1108 * Clocks out one bit via I2C data/clock
1110 static s32
ixgbe_clock_out_i2c_bit(struct ixgbe_hw
*hw
, bool data
)
1113 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1115 status
= ixgbe_set_i2c_data(hw
, &i2cctl
, data
);
1117 status
= ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1119 /* Minimum high period of clock is 4us */
1120 udelay(IXGBE_I2C_T_HIGH
);
1122 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1124 /* Minimum low period of clock is 4.7 us.
1125 * This also takes care of the data hold time.
1127 udelay(IXGBE_I2C_T_LOW
);
1129 status
= IXGBE_ERR_I2C
;
1130 hw_dbg(hw
, "I2C data was not set to %X\n", data
);
1136 * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
1137 * @hw: pointer to hardware structure
1138 * @i2cctl: Current value of I2CCTL register
1140 * Raises the I2C clock line '0'->'1'
1142 static s32
ixgbe_raise_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
)
1146 *i2cctl
|= IXGBE_I2C_CLK_OUT
;
1148 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, *i2cctl
);
1150 /* SCL rise time (1000ns) */
1151 udelay(IXGBE_I2C_T_RISE
);
1157 * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
1158 * @hw: pointer to hardware structure
1159 * @i2cctl: Current value of I2CCTL register
1161 * Lowers the I2C clock line '1'->'0'
1163 static void ixgbe_lower_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
)
1166 *i2cctl
&= ~IXGBE_I2C_CLK_OUT
;
1168 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, *i2cctl
);
1170 /* SCL fall time (300ns) */
1171 udelay(IXGBE_I2C_T_FALL
);
1175 * ixgbe_set_i2c_data - Sets the I2C data bit
1176 * @hw: pointer to hardware structure
1177 * @i2cctl: Current value of I2CCTL register
1178 * @data: I2C data value (0 or 1) to set
1180 * Sets the I2C data bit
1182 static s32
ixgbe_set_i2c_data(struct ixgbe_hw
*hw
, u32
*i2cctl
, bool data
)
1187 *i2cctl
|= IXGBE_I2C_DATA_OUT
;
1189 *i2cctl
&= ~IXGBE_I2C_DATA_OUT
;
1191 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, *i2cctl
);
1193 /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
1194 udelay(IXGBE_I2C_T_RISE
+ IXGBE_I2C_T_FALL
+ IXGBE_I2C_T_SU_DATA
);
1196 /* Verify data was set correctly */
1197 *i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1198 if (data
!= ixgbe_get_i2c_data(i2cctl
)) {
1199 status
= IXGBE_ERR_I2C
;
1200 hw_dbg(hw
, "Error - I2C data was not set to %X.\n", data
);
1207 * ixgbe_get_i2c_data - Reads the I2C SDA data bit
1208 * @hw: pointer to hardware structure
1209 * @i2cctl: Current value of I2CCTL register
1211 * Returns the I2C data bit value
1213 static bool ixgbe_get_i2c_data(u32
*i2cctl
)
1217 if (*i2cctl
& IXGBE_I2C_DATA_IN
)
1226 * ixgbe_i2c_bus_clear - Clears the I2C bus
1227 * @hw: pointer to hardware structure
1229 * Clears the I2C bus by sending nine clock pulses.
1230 * Used when data line is stuck low.
1232 static void ixgbe_i2c_bus_clear(struct ixgbe_hw
*hw
)
1234 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1237 ixgbe_set_i2c_data(hw
, &i2cctl
, 1);
1239 for (i
= 0; i
< 9; i
++) {
1240 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1242 /* Min high period of clock is 4us */
1243 udelay(IXGBE_I2C_T_HIGH
);
1245 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1247 /* Min low period of clock is 4.7us*/
1248 udelay(IXGBE_I2C_T_LOW
);
1251 /* Put the i2c bus back to default state */
1256 * ixgbe_check_phy_link_tnx - Determine link and speed status
1257 * @hw: pointer to hardware structure
1259 * Reads the VS1 register to determine if link is up and the current speed for
1262 s32
ixgbe_check_phy_link_tnx(struct ixgbe_hw
*hw
, ixgbe_link_speed
*speed
,
1267 u32 max_time_out
= 10;
1272 /* Initialize speed and link to default case */
1274 *speed
= IXGBE_LINK_SPEED_10GB_FULL
;
1277 * Check current speed and link status of the PHY register.
1278 * This is a vendor specific register and may have to
1279 * be changed for other copper PHYs.
1281 for (time_out
= 0; time_out
< max_time_out
; time_out
++) {
1283 status
= hw
->phy
.ops
.read_reg(hw
,
1284 IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS
,
1287 phy_link
= phy_data
&
1288 IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS
;
1289 phy_speed
= phy_data
&
1290 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS
;
1291 if (phy_link
== IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS
) {
1294 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS
)
1295 *speed
= IXGBE_LINK_SPEED_1GB_FULL
;
1304 * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
1305 * @hw: pointer to hardware structure
1306 * @firmware_version: pointer to the PHY Firmware Version
1308 s32
ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw
*hw
,
1309 u16
*firmware_version
)
1313 status
= hw
->phy
.ops
.read_reg(hw
, TNX_FW_REV
, MDIO_MMD_VEND1
,