4 * Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
5 * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
7 * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
8 * voltages (including its own power source) and up to two temperatures
9 * (its own plus up to one external one). Voltages are scaled internally
10 * (which is not the common way) with ratios such that the nominal value
11 * of each voltage correspond to a register value of 192 (which means a
12 * resolution of about 0.5% of the nominal value). Temperature values are
13 * reported with a 1 deg resolution and a 3 deg accuracy. Complete
14 * datasheet can be obtained from Analog's website at:
15 * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
17 * This driver also supports the ADM1025A, which differs from the ADM1025
18 * only in that it has "open-drain VID inputs while the ADM1025 has
19 * on-chip 100k pull-ups on the VID inputs". It doesn't make any
22 * This driver also supports the NE1619, a sensor chip made by Philips.
23 * That chip is similar to the ADM1025A, with a few differences. The only
24 * difference that matters to us is that the NE1619 has only two possible
25 * addresses while the ADM1025A has a third one. Complete datasheet can be
26 * obtained from Philips's website at:
27 * http://www.semiconductors.philips.com/pip/NE1619DS.html
29 * Since the ADM1025 was the first chipset supported by this driver, most
30 * comments will refer to this chipset, but are actually general and
31 * concern all supported chipsets, unless mentioned otherwise.
33 * This program is free software; you can redistribute it and/or modify
34 * it under the terms of the GNU General Public License as published by
35 * the Free Software Foundation; either version 2 of the License, or
36 * (at your option) any later version.
38 * This program is distributed in the hope that it will be useful,
39 * but WITHOUT ANY WARRANTY; without even the implied warranty of
40 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
41 * GNU General Public License for more details.
43 * You should have received a copy of the GNU General Public License
44 * along with this program; if not, write to the Free Software
45 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
48 #include <linux/module.h>
49 #include <linux/init.h>
50 #include <linux/slab.h>
51 #include <linux/jiffies.h>
52 #include <linux/i2c.h>
53 #include <linux/hwmon.h>
54 #include <linux/hwmon-sysfs.h>
55 #include <linux/hwmon-vid.h>
56 #include <linux/err.h>
57 #include <linux/mutex.h>
61 * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
62 * NE1619 has two possible addresses: 0x2c and 0x2d.
65 static unsigned short normal_i2c
[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END
};
71 I2C_CLIENT_INSMOD_2(adm1025
, ne1619
);
74 * The ADM1025 registers
77 #define ADM1025_REG_MAN_ID 0x3E
78 #define ADM1025_REG_CHIP_ID 0x3F
79 #define ADM1025_REG_CONFIG 0x40
80 #define ADM1025_REG_STATUS1 0x41
81 #define ADM1025_REG_STATUS2 0x42
82 #define ADM1025_REG_IN(nr) (0x20 + (nr))
83 #define ADM1025_REG_IN_MAX(nr) (0x2B + (nr) * 2)
84 #define ADM1025_REG_IN_MIN(nr) (0x2C + (nr) * 2)
85 #define ADM1025_REG_TEMP(nr) (0x26 + (nr))
86 #define ADM1025_REG_TEMP_HIGH(nr) (0x37 + (nr) * 2)
87 #define ADM1025_REG_TEMP_LOW(nr) (0x38 + (nr) * 2)
88 #define ADM1025_REG_VID 0x47
89 #define ADM1025_REG_VID4 0x49
92 * Conversions and various macros
93 * The ADM1025 uses signed 8-bit values for temperatures.
96 static const int in_scale
[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
98 #define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192)
99 #define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \
100 (val) * 192 >= (scale) * 255 ? 255 : \
101 ((val) * 192 + (scale)/2) / (scale))
103 #define TEMP_FROM_REG(reg) ((reg) * 1000)
104 #define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \
105 (val) >= 126500 ? 127 : \
106 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
109 * Functions declaration
112 static int adm1025_attach_adapter(struct i2c_adapter
*adapter
);
113 static int adm1025_detect(struct i2c_adapter
*adapter
, int address
, int kind
);
114 static void adm1025_init_client(struct i2c_client
*client
);
115 static int adm1025_detach_client(struct i2c_client
*client
);
116 static struct adm1025_data
*adm1025_update_device(struct device
*dev
);
119 * Driver data (common to all clients)
122 static struct i2c_driver adm1025_driver
= {
126 .id
= I2C_DRIVERID_ADM1025
,
127 .attach_adapter
= adm1025_attach_adapter
,
128 .detach_client
= adm1025_detach_client
,
132 * Client data (each client gets its own)
135 struct adm1025_data
{
136 struct i2c_client client
;
137 struct device
*hwmon_dev
;
138 struct mutex update_lock
;
139 char valid
; /* zero until following fields are valid */
140 unsigned long last_updated
; /* in jiffies */
142 u8 in
[6]; /* register value */
143 u8 in_max
[6]; /* register value */
144 u8 in_min
[6]; /* register value */
145 s8 temp
[2]; /* register value */
146 s8 temp_min
[2]; /* register value */
147 s8 temp_max
[2]; /* register value */
148 u16 alarms
; /* register values, combined */
149 u8 vid
; /* register values, combined */
158 show_in(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
160 int index
= to_sensor_dev_attr(attr
)->index
;
161 struct adm1025_data
*data
= adm1025_update_device(dev
);
162 return sprintf(buf
, "%u\n", IN_FROM_REG(data
->in
[index
],
167 show_in_min(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
169 int index
= to_sensor_dev_attr(attr
)->index
;
170 struct adm1025_data
*data
= adm1025_update_device(dev
);
171 return sprintf(buf
, "%u\n", IN_FROM_REG(data
->in_min
[index
],
176 show_in_max(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
178 int index
= to_sensor_dev_attr(attr
)->index
;
179 struct adm1025_data
*data
= adm1025_update_device(dev
);
180 return sprintf(buf
, "%u\n", IN_FROM_REG(data
->in_max
[index
],
185 show_temp(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
187 int index
= to_sensor_dev_attr(attr
)->index
;
188 struct adm1025_data
*data
= adm1025_update_device(dev
);
189 return sprintf(buf
, "%d\n", TEMP_FROM_REG(data
->temp
[index
]));
193 show_temp_min(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
195 int index
= to_sensor_dev_attr(attr
)->index
;
196 struct adm1025_data
*data
= adm1025_update_device(dev
);
197 return sprintf(buf
, "%d\n", TEMP_FROM_REG(data
->temp_min
[index
]));
201 show_temp_max(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
203 int index
= to_sensor_dev_attr(attr
)->index
;
204 struct adm1025_data
*data
= adm1025_update_device(dev
);
205 return sprintf(buf
, "%d\n", TEMP_FROM_REG(data
->temp_max
[index
]));
208 static ssize_t
set_in_min(struct device
*dev
, struct device_attribute
*attr
,
209 const char *buf
, size_t count
)
211 int index
= to_sensor_dev_attr(attr
)->index
;
212 struct i2c_client
*client
= to_i2c_client(dev
);
213 struct adm1025_data
*data
= i2c_get_clientdata(client
);
214 long val
= simple_strtol(buf
, NULL
, 10);
216 mutex_lock(&data
->update_lock
);
217 data
->in_min
[index
] = IN_TO_REG(val
, in_scale
[index
]);
218 i2c_smbus_write_byte_data(client
, ADM1025_REG_IN_MIN(index
),
219 data
->in_min
[index
]);
220 mutex_unlock(&data
->update_lock
);
224 static ssize_t
set_in_max(struct device
*dev
, struct device_attribute
*attr
,
225 const char *buf
, size_t count
)
227 int index
= to_sensor_dev_attr(attr
)->index
;
228 struct i2c_client
*client
= to_i2c_client(dev
);
229 struct adm1025_data
*data
= i2c_get_clientdata(client
);
230 long val
= simple_strtol(buf
, NULL
, 10);
232 mutex_lock(&data
->update_lock
);
233 data
->in_max
[index
] = IN_TO_REG(val
, in_scale
[index
]);
234 i2c_smbus_write_byte_data(client
, ADM1025_REG_IN_MAX(index
),
235 data
->in_max
[index
]);
236 mutex_unlock(&data
->update_lock
);
240 #define set_in(offset) \
241 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
242 show_in, NULL, offset); \
243 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
244 show_in_min, set_in_min, offset); \
245 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
246 show_in_max, set_in_max, offset)
254 static ssize_t
set_temp_min(struct device
*dev
, struct device_attribute
*attr
,
255 const char *buf
, size_t count
)
257 int index
= to_sensor_dev_attr(attr
)->index
;
258 struct i2c_client
*client
= to_i2c_client(dev
);
259 struct adm1025_data
*data
= i2c_get_clientdata(client
);
260 long val
= simple_strtol(buf
, NULL
, 10);
262 mutex_lock(&data
->update_lock
);
263 data
->temp_min
[index
] = TEMP_TO_REG(val
);
264 i2c_smbus_write_byte_data(client
, ADM1025_REG_TEMP_LOW(index
),
265 data
->temp_min
[index
]);
266 mutex_unlock(&data
->update_lock
);
270 static ssize_t
set_temp_max(struct device
*dev
, struct device_attribute
*attr
,
271 const char *buf
, size_t count
)
273 int index
= to_sensor_dev_attr(attr
)->index
;
274 struct i2c_client
*client
= to_i2c_client(dev
);
275 struct adm1025_data
*data
= i2c_get_clientdata(client
);
276 long val
= simple_strtol(buf
, NULL
, 10);
278 mutex_lock(&data
->update_lock
);
279 data
->temp_max
[index
] = TEMP_TO_REG(val
);
280 i2c_smbus_write_byte_data(client
, ADM1025_REG_TEMP_HIGH(index
),
281 data
->temp_max
[index
]);
282 mutex_unlock(&data
->update_lock
);
286 #define set_temp(offset) \
287 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
288 show_temp, NULL, offset - 1); \
289 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
290 show_temp_min, set_temp_min, offset - 1); \
291 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
292 show_temp_max, set_temp_max, offset - 1)
297 show_alarms(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
299 struct adm1025_data
*data
= adm1025_update_device(dev
);
300 return sprintf(buf
, "%u\n", data
->alarms
);
302 static DEVICE_ATTR(alarms
, S_IRUGO
, show_alarms
, NULL
);
305 show_alarm(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
307 int bitnr
= to_sensor_dev_attr(attr
)->index
;
308 struct adm1025_data
*data
= adm1025_update_device(dev
);
309 return sprintf(buf
, "%u\n", (data
->alarms
>> bitnr
) & 1);
311 static SENSOR_DEVICE_ATTR(in0_alarm
, S_IRUGO
, show_alarm
, NULL
, 0);
312 static SENSOR_DEVICE_ATTR(in1_alarm
, S_IRUGO
, show_alarm
, NULL
, 1);
313 static SENSOR_DEVICE_ATTR(in2_alarm
, S_IRUGO
, show_alarm
, NULL
, 2);
314 static SENSOR_DEVICE_ATTR(in3_alarm
, S_IRUGO
, show_alarm
, NULL
, 3);
315 static SENSOR_DEVICE_ATTR(in4_alarm
, S_IRUGO
, show_alarm
, NULL
, 8);
316 static SENSOR_DEVICE_ATTR(in5_alarm
, S_IRUGO
, show_alarm
, NULL
, 9);
317 static SENSOR_DEVICE_ATTR(temp1_alarm
, S_IRUGO
, show_alarm
, NULL
, 5);
318 static SENSOR_DEVICE_ATTR(temp2_alarm
, S_IRUGO
, show_alarm
, NULL
, 4);
319 static SENSOR_DEVICE_ATTR(temp1_fault
, S_IRUGO
, show_alarm
, NULL
, 14);
322 show_vid(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
324 struct adm1025_data
*data
= adm1025_update_device(dev
);
325 return sprintf(buf
, "%u\n", vid_from_reg(data
->vid
, data
->vrm
));
327 static DEVICE_ATTR(cpu0_vid
, S_IRUGO
, show_vid
, NULL
);
330 show_vrm(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
332 struct adm1025_data
*data
= dev_get_drvdata(dev
);
333 return sprintf(buf
, "%u\n", data
->vrm
);
335 static ssize_t
set_vrm(struct device
*dev
, struct device_attribute
*attr
,
336 const char *buf
, size_t count
)
338 struct i2c_client
*client
= to_i2c_client(dev
);
339 struct adm1025_data
*data
= i2c_get_clientdata(client
);
340 data
->vrm
= simple_strtoul(buf
, NULL
, 10);
343 static DEVICE_ATTR(vrm
, S_IRUGO
| S_IWUSR
, show_vrm
, set_vrm
);
349 static int adm1025_attach_adapter(struct i2c_adapter
*adapter
)
351 if (!(adapter
->class & I2C_CLASS_HWMON
))
353 return i2c_probe(adapter
, &addr_data
, adm1025_detect
);
356 static struct attribute
*adm1025_attributes
[] = {
357 &sensor_dev_attr_in0_input
.dev_attr
.attr
,
358 &sensor_dev_attr_in1_input
.dev_attr
.attr
,
359 &sensor_dev_attr_in2_input
.dev_attr
.attr
,
360 &sensor_dev_attr_in3_input
.dev_attr
.attr
,
361 &sensor_dev_attr_in5_input
.dev_attr
.attr
,
362 &sensor_dev_attr_in0_min
.dev_attr
.attr
,
363 &sensor_dev_attr_in1_min
.dev_attr
.attr
,
364 &sensor_dev_attr_in2_min
.dev_attr
.attr
,
365 &sensor_dev_attr_in3_min
.dev_attr
.attr
,
366 &sensor_dev_attr_in5_min
.dev_attr
.attr
,
367 &sensor_dev_attr_in0_max
.dev_attr
.attr
,
368 &sensor_dev_attr_in1_max
.dev_attr
.attr
,
369 &sensor_dev_attr_in2_max
.dev_attr
.attr
,
370 &sensor_dev_attr_in3_max
.dev_attr
.attr
,
371 &sensor_dev_attr_in5_max
.dev_attr
.attr
,
372 &sensor_dev_attr_in0_alarm
.dev_attr
.attr
,
373 &sensor_dev_attr_in1_alarm
.dev_attr
.attr
,
374 &sensor_dev_attr_in2_alarm
.dev_attr
.attr
,
375 &sensor_dev_attr_in3_alarm
.dev_attr
.attr
,
376 &sensor_dev_attr_in5_alarm
.dev_attr
.attr
,
377 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
378 &sensor_dev_attr_temp2_input
.dev_attr
.attr
,
379 &sensor_dev_attr_temp1_min
.dev_attr
.attr
,
380 &sensor_dev_attr_temp2_min
.dev_attr
.attr
,
381 &sensor_dev_attr_temp1_max
.dev_attr
.attr
,
382 &sensor_dev_attr_temp2_max
.dev_attr
.attr
,
383 &sensor_dev_attr_temp1_alarm
.dev_attr
.attr
,
384 &sensor_dev_attr_temp2_alarm
.dev_attr
.attr
,
385 &sensor_dev_attr_temp1_fault
.dev_attr
.attr
,
386 &dev_attr_alarms
.attr
,
387 &dev_attr_cpu0_vid
.attr
,
392 static const struct attribute_group adm1025_group
= {
393 .attrs
= adm1025_attributes
,
396 static struct attribute
*adm1025_attributes_in4
[] = {
397 &sensor_dev_attr_in4_input
.dev_attr
.attr
,
398 &sensor_dev_attr_in4_min
.dev_attr
.attr
,
399 &sensor_dev_attr_in4_max
.dev_attr
.attr
,
400 &sensor_dev_attr_in4_alarm
.dev_attr
.attr
,
404 static const struct attribute_group adm1025_group_in4
= {
405 .attrs
= adm1025_attributes_in4
,
409 * The following function does more than just detection. If detection
410 * succeeds, it also registers the new chip.
412 static int adm1025_detect(struct i2c_adapter
*adapter
, int address
, int kind
)
414 struct i2c_client
*client
;
415 struct adm1025_data
*data
;
417 const char *name
= "";
420 if (!i2c_check_functionality(adapter
, I2C_FUNC_SMBUS_BYTE_DATA
))
423 if (!(data
= kzalloc(sizeof(struct adm1025_data
), GFP_KERNEL
))) {
428 client
= &data
->client
;
429 i2c_set_clientdata(client
, data
);
430 client
->addr
= address
;
431 client
->adapter
= adapter
;
432 client
->driver
= &adm1025_driver
;
435 * Now we do the remaining detection. A negative kind means that
436 * the driver was loaded with no force parameter (default), so we
437 * must both detect and identify the chip. A zero kind means that
438 * the driver was loaded with the force parameter, the detection
439 * step shall be skipped. A positive kind means that the driver
440 * was loaded with the force parameter and a given kind of chip is
441 * requested, so both the detection and the identification steps
444 config
= i2c_smbus_read_byte_data(client
, ADM1025_REG_CONFIG
);
445 if (kind
< 0) { /* detection */
446 if ((config
& 0x80) != 0x00
447 || (i2c_smbus_read_byte_data(client
,
448 ADM1025_REG_STATUS1
) & 0xC0) != 0x00
449 || (i2c_smbus_read_byte_data(client
,
450 ADM1025_REG_STATUS2
) & 0xBC) != 0x00) {
451 dev_dbg(&adapter
->dev
,
452 "ADM1025 detection failed at 0x%02x.\n",
458 if (kind
<= 0) { /* identification */
461 man_id
= i2c_smbus_read_byte_data(client
, ADM1025_REG_MAN_ID
);
462 chip_id
= i2c_smbus_read_byte_data(client
, ADM1025_REG_CHIP_ID
);
464 if (man_id
== 0x41) { /* Analog Devices */
465 if ((chip_id
& 0xF0) == 0x20) { /* ADM1025/ADM1025A */
469 if (man_id
== 0xA1) { /* Philips */
471 && (chip_id
& 0xF0) == 0x20) { /* NE1619 */
476 if (kind
<= 0) { /* identification failed */
477 dev_info(&adapter
->dev
,
478 "Unsupported chip (man_id=0x%02X, "
479 "chip_id=0x%02X).\n", man_id
, chip_id
);
484 if (kind
== adm1025
) {
486 } else if (kind
== ne1619
) {
490 /* We can fill in the remaining client fields */
491 strlcpy(client
->name
, name
, I2C_NAME_SIZE
);
492 mutex_init(&data
->update_lock
);
494 /* Tell the I2C layer a new client has arrived */
495 if ((err
= i2c_attach_client(client
)))
498 /* Initialize the ADM1025 chip */
499 adm1025_init_client(client
);
501 /* Register sysfs hooks */
502 if ((err
= sysfs_create_group(&client
->dev
.kobj
, &adm1025_group
)))
505 /* Pin 11 is either in4 (+12V) or VID4 */
506 if (!(config
& 0x20)) {
507 if ((err
= sysfs_create_group(&client
->dev
.kobj
,
508 &adm1025_group_in4
)))
512 data
->hwmon_dev
= hwmon_device_register(&client
->dev
);
513 if (IS_ERR(data
->hwmon_dev
)) {
514 err
= PTR_ERR(data
->hwmon_dev
);
521 sysfs_remove_group(&client
->dev
.kobj
, &adm1025_group
);
522 sysfs_remove_group(&client
->dev
.kobj
, &adm1025_group_in4
);
524 i2c_detach_client(client
);
531 static void adm1025_init_client(struct i2c_client
*client
)
534 struct adm1025_data
*data
= i2c_get_clientdata(client
);
537 data
->vrm
= vid_which_vrm();
541 * Usually we avoid setting limits on driver init, but it happens
542 * that the ADM1025 comes with stupid default limits (all registers
543 * set to 0). In case the chip has not gone through any limit
544 * setting yet, we better set the high limits to the max so that
547 for (i
=0; i
<6; i
++) {
548 reg
= i2c_smbus_read_byte_data(client
,
549 ADM1025_REG_IN_MAX(i
));
551 i2c_smbus_write_byte_data(client
,
552 ADM1025_REG_IN_MAX(i
),
555 for (i
=0; i
<2; i
++) {
556 reg
= i2c_smbus_read_byte_data(client
,
557 ADM1025_REG_TEMP_HIGH(i
));
559 i2c_smbus_write_byte_data(client
,
560 ADM1025_REG_TEMP_HIGH(i
),
565 * Start the conversions
567 reg
= i2c_smbus_read_byte_data(client
, ADM1025_REG_CONFIG
);
569 i2c_smbus_write_byte_data(client
, ADM1025_REG_CONFIG
,
573 static int adm1025_detach_client(struct i2c_client
*client
)
575 struct adm1025_data
*data
= i2c_get_clientdata(client
);
578 hwmon_device_unregister(data
->hwmon_dev
);
579 sysfs_remove_group(&client
->dev
.kobj
, &adm1025_group
);
580 sysfs_remove_group(&client
->dev
.kobj
, &adm1025_group_in4
);
582 if ((err
= i2c_detach_client(client
)))
589 static struct adm1025_data
*adm1025_update_device(struct device
*dev
)
591 struct i2c_client
*client
= to_i2c_client(dev
);
592 struct adm1025_data
*data
= i2c_get_clientdata(client
);
594 mutex_lock(&data
->update_lock
);
596 if (time_after(jiffies
, data
->last_updated
+ HZ
* 2) || !data
->valid
) {
599 dev_dbg(&client
->dev
, "Updating data.\n");
600 for (i
=0; i
<6; i
++) {
601 data
->in
[i
] = i2c_smbus_read_byte_data(client
,
603 data
->in_min
[i
] = i2c_smbus_read_byte_data(client
,
604 ADM1025_REG_IN_MIN(i
));
605 data
->in_max
[i
] = i2c_smbus_read_byte_data(client
,
606 ADM1025_REG_IN_MAX(i
));
608 for (i
=0; i
<2; i
++) {
609 data
->temp
[i
] = i2c_smbus_read_byte_data(client
,
610 ADM1025_REG_TEMP(i
));
611 data
->temp_min
[i
] = i2c_smbus_read_byte_data(client
,
612 ADM1025_REG_TEMP_LOW(i
));
613 data
->temp_max
[i
] = i2c_smbus_read_byte_data(client
,
614 ADM1025_REG_TEMP_HIGH(i
));
616 data
->alarms
= i2c_smbus_read_byte_data(client
,
618 | (i2c_smbus_read_byte_data(client
,
619 ADM1025_REG_STATUS2
) << 8);
620 data
->vid
= (i2c_smbus_read_byte_data(client
,
621 ADM1025_REG_VID
) & 0x0f)
622 | ((i2c_smbus_read_byte_data(client
,
623 ADM1025_REG_VID4
) & 0x01) << 4);
625 data
->last_updated
= jiffies
;
629 mutex_unlock(&data
->update_lock
);
634 static int __init
sensors_adm1025_init(void)
636 return i2c_add_driver(&adm1025_driver
);
639 static void __exit
sensors_adm1025_exit(void)
641 i2c_del_driver(&adm1025_driver
);
644 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
645 MODULE_DESCRIPTION("ADM1025 driver");
646 MODULE_LICENSE("GPL");
648 module_init(sensors_adm1025_init
);
649 module_exit(sensors_adm1025_exit
);