5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/config.h>
29 #include <linux/delay.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
43 static void boot_msp34xx(struct bttv
*btv
, int pin
);
44 static void boot_bt832(struct bttv
*btv
);
45 static void hauppauge_eeprom(struct bttv
*btv
);
46 static void avermedia_eeprom(struct bttv
*btv
);
47 static void osprey_eeprom(struct bttv
*btv
);
48 static void modtec_eeprom(struct bttv
*btv
);
49 static void init_PXC200(struct bttv
*btv
);
50 static void init_RTV24(struct bttv
*btv
);
52 static void winview_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
53 static void lt9415_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
54 static void avermedia_tvphone_audio(struct bttv
*btv
, struct video_audio
*v
,
56 static void avermedia_tv_stereo_audio(struct bttv
*btv
, struct video_audio
*v
,
58 static void terratv_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
59 static void gvbctv3pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
60 static void gvbctv5pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
61 static void winfast2000_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
62 static void pvbt878p9b_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
63 static void fv2000s_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
64 static void windvr_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
65 static void adtvk503_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
66 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
);
67 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
);
68 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
);
69 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
);
70 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
);
72 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
);
74 static void picolo_tetra_muxsel(struct bttv
*btv
, unsigned int input
);
75 static void picolo_tetra_init(struct bttv
*btv
);
77 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
);
78 static void tibetCS16_init(struct bttv
*btv
);
80 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
);
81 static void kodicom4400r_init(struct bttv
*btv
);
83 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
);
84 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
);
86 static int terratec_active_radio_upgrade(struct bttv
*btv
);
87 static int tea5757_read(struct bttv
*btv
);
88 static int tea5757_write(struct bttv
*btv
, int value
);
89 static void identify_by_eeprom(struct bttv
*btv
,
90 unsigned char eeprom_data
[256]);
91 static int __devinit
pvr_boot(struct bttv
*btv
);
93 /* config variables */
94 static unsigned int triton1
=0;
95 static unsigned int vsfx
=0;
96 static unsigned int latency
= UNSET
;
99 static unsigned int card
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
100 static unsigned int pll
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
101 static unsigned int tuner
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
102 static unsigned int svhs
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
103 static unsigned int remote
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
104 static struct bttv
*master
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = NULL
};
106 static unsigned int autoload
= 1;
108 static unsigned int autoload
= 0;
110 static unsigned int gpiomask
= UNSET
;
111 static unsigned int audioall
= UNSET
;
112 static unsigned int audiomux
[5] = { [ 0 ... 4 ] = UNSET
};
115 module_param(triton1
, int, 0444);
116 module_param(vsfx
, int, 0444);
117 module_param(no_overlay
, int, 0444);
118 module_param(latency
, int, 0444);
119 module_param(gpiomask
, int, 0444);
120 module_param(audioall
, int, 0444);
121 module_param(autoload
, int, 0444);
123 module_param_array(card
, int, NULL
, 0444);
124 module_param_array(pll
, int, NULL
, 0444);
125 module_param_array(tuner
, int, NULL
, 0444);
126 module_param_array(svhs
, int, NULL
, 0444);
127 module_param_array(remote
, int, NULL
, 0444);
128 module_param_array(audiomux
, int, NULL
, 0444);
130 MODULE_PARM_DESC(triton1
,"set ETBF pci config bit "
131 "[enable bug compatibility for triton1 + others]");
132 MODULE_PARM_DESC(vsfx
,"set VSFX pci config bit "
133 "[yet another chipset flaw workaround]");
134 MODULE_PARM_DESC(latency
,"pci latency timer");
135 MODULE_PARM_DESC(card
,"specify TV/grabber card model, see CARDLIST file for a list");
136 MODULE_PARM_DESC(pll
,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
137 MODULE_PARM_DESC(tuner
,"specify installed tuner type");
138 MODULE_PARM_DESC(autoload
,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 /* ----------------------------------------------------------------------- */
141 /* list of card IDs for bt878+ cards */
147 } cards
[] __devinitdata
= {
148 { 0x13eb0070, BTTV_HAUPPAUGE878
, "Hauppauge WinTV" },
149 { 0x39000070, BTTV_HAUPPAUGE878
, "Hauppauge WinTV-D" },
150 { 0x45000070, BTTV_HAUPPAUGEPVR
, "Hauppauge WinTV/PVR" },
151 { 0xff000070, BTTV_OSPREY1x0
, "Osprey-100" },
152 { 0xff010070, BTTV_OSPREY2x0_SVID
,"Osprey-200" },
153 { 0xff020070, BTTV_OSPREY500
, "Osprey-500" },
154 { 0xff030070, BTTV_OSPREY2000
, "Osprey-2000" },
155 { 0xff040070, BTTV_OSPREY540
, "Osprey-540" },
157 { 0x00011002, BTTV_ATI_TVWONDER
, "ATI TV Wonder" },
158 { 0x00031002, BTTV_ATI_TVWONDERVE
,"ATI TV Wonder/VE" },
160 { 0x6606107d, BTTV_WINFAST2000
, "Leadtek WinFast TV 2000" },
161 { 0x6607107d, BTTV_WINFASTVC100
, "Leadtek WinFast VC 100" },
162 { 0x6609107d, BTTV_WINFAST2000
, "Leadtek TV 2000 XP" },
163 { 0x263610b4, BTTV_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
164 { 0x264510b4, BTTV_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
165 { 0x402010fc, BTTV_GVBCTV3PCI
, "I-O Data Co. GV-BCTV3/PCI" },
166 { 0x405010fc, BTTV_GVBCTV4PCI
, "I-O Data Co. GV-BCTV4/PCI" },
167 { 0x407010fc, BTTV_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
168 { 0xd01810fc, BTTV_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
170 { 0x001211bd, BTTV_PINNACLE
, "Pinnacle PCTV" },
171 /* some cards ship with byteswapped IDs ... */
172 { 0x1200bd11, BTTV_PINNACLE
, "Pinnacle PCTV [bswap]" },
173 { 0xff00bd11, BTTV_PINNACLE
, "Pinnacle PCTV [bswap]" },
174 /* this seems to happen as well ... */
175 { 0xff1211bd, BTTV_PINNACLE
, "Pinnacle PCTV" },
177 { 0x3000121a, BTTV_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
178 { 0x263710b4, BTTV_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
179 { 0x3060121a, BTTV_STB2
, "3Dfx VoodooTV 100/ STB OEM" },
181 { 0x3000144f, BTTV_MAGICTVIEW063
, "(Askey Magic/others) TView99 CPH06x" },
182 { 0xa005144f, BTTV_MAGICTVIEW063
, "CPH06X TView99-Card" },
183 { 0x3002144f, BTTV_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH05x" },
184 { 0x3005144f, BTTV_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
185 { 0x5000144f, BTTV_MAGICTVIEW061
, "Askey CPH050" },
186 { 0x300014ff, BTTV_MAGICTVIEW061
, "TView 99 (CPH061)" },
187 { 0x300214ff, BTTV_PHOEBE_TVMAS
, "Phoebe TV Master (CPH060)" },
189 { 0x00011461, BTTV_AVPHONE98
, "AVerMedia TVPhone98" },
190 { 0x00021461, BTTV_AVERMEDIA98
, "AVermedia TVCapture 98" },
191 { 0x00031461, BTTV_AVPHONE98
, "AVerMedia TVPhone98" },
192 { 0x00041461, BTTV_AVERMEDIA98
, "AVerMedia TVCapture 98" },
193 { 0x03001461, BTTV_AVERMEDIA98
, "VDOMATE TV TUNER CARD" },
195 { 0x1117153b, BTTV_TERRATVALUE
, "Terratec TValue (Philips PAL B/G)" },
196 { 0x1118153b, BTTV_TERRATVALUE
, "Terratec TValue (Temic PAL B/G)" },
197 { 0x1119153b, BTTV_TERRATVALUE
, "Terratec TValue (Philips PAL I)" },
198 { 0x111a153b, BTTV_TERRATVALUE
, "Terratec TValue (Temic PAL I)" },
200 { 0x1123153b, BTTV_TERRATVRADIO
, "Terratec TV Radio+" },
201 { 0x1127153b, BTTV_TERRATV
, "Terratec TV+ (V1.05)" },
202 /* clashes with FlyVideo
203 *{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" }, */
204 { 0x1134153b, BTTV_TERRATVALUE
, "Terratec TValue (LR102)" },
205 { 0x1135153b, BTTV_TERRATVALUER
, "Terratec TValue Radio" }, /* LR102 */
206 { 0x5018153b, BTTV_TERRATVALUE
, "Terratec TValue" }, /* ?? */
207 { 0xff3b153b, BTTV_TERRATVALUER
, "Terratec TValue Radio" }, /* ?? */
209 { 0x400015b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
210 { 0x400a15b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
211 { 0x400d15b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
212 { 0x401015b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
213 { 0x401615b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
215 { 0x1430aa00, BTTV_PV143
, "Provideo PV143A" },
216 { 0x1431aa00, BTTV_PV143
, "Provideo PV143B" },
217 { 0x1432aa00, BTTV_PV143
, "Provideo PV143C" },
218 { 0x1433aa00, BTTV_PV143
, "Provideo PV143D" },
219 { 0x1433aa03, BTTV_PV143
, "Security Eyes" },
221 { 0x1460aa00, BTTV_PV150
, "Provideo PV150A-1" },
222 { 0x1461aa01, BTTV_PV150
, "Provideo PV150A-2" },
223 { 0x1462aa02, BTTV_PV150
, "Provideo PV150A-3" },
224 { 0x1463aa03, BTTV_PV150
, "Provideo PV150A-4" },
226 { 0x1464aa04, BTTV_PV150
, "Provideo PV150B-1" },
227 { 0x1465aa05, BTTV_PV150
, "Provideo PV150B-2" },
228 { 0x1466aa06, BTTV_PV150
, "Provideo PV150B-3" },
229 { 0x1467aa07, BTTV_PV150
, "Provideo PV150B-4" },
231 { 0xa132ff00, BTTV_IVC100
, "IVC-100" },
232 { 0xa1550000, BTTV_IVC200
, "IVC-200" },
233 { 0xa1550001, BTTV_IVC200
, "IVC-200" },
234 { 0xa1550002, BTTV_IVC200
, "IVC-200" },
235 { 0xa1550003, BTTV_IVC200
, "IVC-200" },
236 { 0xa1550100, BTTV_IVC200
, "IVC-200G" },
237 { 0xa1550101, BTTV_IVC200
, "IVC-200G" },
238 { 0xa1550102, BTTV_IVC200
, "IVC-200G" },
239 { 0xa1550103, BTTV_IVC200
, "IVC-200G" },
240 { 0xa182ff00, BTTV_IVC120
, "IVC-120G" },
241 { 0xa182ff01, BTTV_IVC120
, "IVC-120G" },
242 { 0xa182ff02, BTTV_IVC120
, "IVC-120G" },
243 { 0xa182ff03, BTTV_IVC120
, "IVC-120G" },
244 { 0xa182ff04, BTTV_IVC120
, "IVC-120G" },
245 { 0xa182ff05, BTTV_IVC120
, "IVC-120G" },
246 { 0xa182ff06, BTTV_IVC120
, "IVC-120G" },
247 { 0xa182ff07, BTTV_IVC120
, "IVC-120G" },
248 { 0xa182ff08, BTTV_IVC120
, "IVC-120G" },
249 { 0xa182ff09, BTTV_IVC120
, "IVC-120G" },
250 { 0xa182ff0a, BTTV_IVC120
, "IVC-120G" },
251 { 0xa182ff0b, BTTV_IVC120
, "IVC-120G" },
252 { 0xa182ff0c, BTTV_IVC120
, "IVC-120G" },
253 { 0xa182ff0d, BTTV_IVC120
, "IVC-120G" },
254 { 0xa182ff0e, BTTV_IVC120
, "IVC-120G" },
255 { 0xa182ff0f, BTTV_IVC120
, "IVC-120G" },
257 { 0x41424344, BTTV_GRANDTEC
, "GrandTec Multi Capture" },
258 { 0x01020304, BTTV_XGUARD
, "Grandtec Grand X-Guard" },
260 { 0x18501851, BTTV_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
261 { 0xa0501851, BTTV_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
262 { 0x18511851, BTTV_FLYVIDEO98EZ
, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
263 { 0x18521852, BTTV_TYPHOON_TVIEW
, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
264 { 0x41a0a051, BTTV_FLYVIDEO_98FM
, "Lifeview FlyVideo 98 LR50 Rev Q" },
265 { 0x18501f7f, BTTV_FLYVIDEO_98
, "Lifeview Flyvideo 98" },
267 { 0x010115cb, BTTV_GMV1
, "AG GMV1" },
268 { 0x010114c7, BTTV_MODTEC_205
, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
270 { 0x10b42636, BTTV_HAUPPAUGE878
, "STB ???" },
271 { 0x217d6606, BTTV_WINFAST2000
, "Leadtek WinFast TV 2000" },
272 { 0xfff6f6ff, BTTV_WINFAST2000
, "Leadtek WinFast TV 2000" },
273 { 0x03116000, BTTV_SENSORAY311
, "Sensoray 311" },
274 { 0x00790e11, BTTV_WINDVR
, "Canopus WinDVR PCI" },
275 { 0xa0fca1a0, BTTV_ZOLTRIX
, "Face to Face Tvmax" },
276 { 0x20007063, BTTV_PC_HDTV
, "pcHDTV HD-2000 TV"},
277 { 0x82b2aa6a, BTTV_SIMUS_GVC1100
, "SIMUS GVC1100" },
278 { 0x146caa0c, BTTV_PV951
, "ituner spectra8" },
279 { 0x200a1295, BTTV_PXC200
, "ImageNation PXC200A" },
281 { 0x40111554, BTTV_PV_BT878P_9B
, "Prolink Pixelview PV-BT" },
282 { 0x17de0a01, BTTV_KWORLD
, "Mecer TV/FM/Video Tuner" },
284 { 0x01051805, BTTV_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #1" },
285 { 0x01061805, BTTV_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #2" },
286 { 0x01071805, BTTV_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #3" },
287 { 0x01081805, BTTV_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #4" },
289 { 0x15409511, BTTV_ACORP_Y878F
, "Acorp Y878F" },
291 /* likely broken, vendor id doesn't match the other magic views ...
292 * { 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
294 /* DVB cards (using pci function .1 for mpeg data xfer) */
295 { 0x01010071, BTTV_NEBULA_DIGITV
, "Nebula Electronics DigiTV" },
296 { 0x07611461, BTTV_AVDVBT_761
, "AverMedia AverTV DVB-T 761" },
297 { 0x001c11bd, BTTV_PINNACLESAT
, "Pinnacle PCTV Sat" },
298 { 0x002611bd, BTTV_TWINHAN_DST
, "Pinnacle PCTV SAT CI" },
299 { 0x00011822, BTTV_TWINHAN_DST
, "Twinhan VisionPlus DVB" },
300 { 0xfc00270f, BTTV_TWINHAN_DST
, "ChainTech digitop DST-1000 DVB-S" },
301 { 0x07711461, BTTV_AVDVBT_771
, "AVermedia AverTV DVB-T 771" },
302 { 0xdb1018ac, BTTV_DVICO_DVBT_LITE
, "DViCO FusionHDTV DVB-T Lite" },
303 { 0xd50018ac, BTTV_DVICO_FUSIONHDTV_5_LITE
, "DViCO FusionHDTV 5 Lite" },
308 /* ----------------------------------------------------------------------- */
309 /* array with description for bt848 / bt878 tv/grabber cards */
311 struct tvcard bttv_tvcards
[] = {
313 /* ---- card 0x00 ---------------------------------- */
314 .name
= " *** UNKNOWN/GENERIC *** ",
319 .muxsel
= { 2, 3, 1, 0},
321 .tuner_addr
= ADDR_UNSET
,
329 .muxsel
= { 2, 3, 1, 1},
330 .audiomux
= { 2, 0, 0, 0, 10},
333 .tuner_addr
= ADDR_UNSET
,
335 .name
= "Hauppauge (bt848)",
341 .muxsel
= { 2, 3, 1, 1},
342 .audiomux
= { 0, 1, 2, 3, 4},
345 .tuner_addr
= ADDR_UNSET
,
347 .name
= "STB, Gateway P/N 6000699 (bt848)",
353 .muxsel
= { 2, 3, 1, 1},
354 .audiomux
= { 4, 0, 2, 3, 1},
357 .tuner_type
= TUNER_PHILIPS_NTSC
,
358 .tuner_addr
= ADDR_UNSET
,
363 /* ---- card 0x04 ---------------------------------- */
364 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
370 .muxsel
= { 2, 3, 1, 1},
374 .tuner_addr
= ADDR_UNSET
,
376 .name
= "Diamond DTV2000",
382 .muxsel
= { 2, 3, 1, 0},
383 .audiomux
= { 0, 1, 0, 1, 3},
386 .tuner_addr
= ADDR_UNSET
,
388 .name
= "AVerMedia TVPhone",
393 .muxsel
= { 2, 3, 1, 1},
395 .audiomux
= { 0x0c, 0x04, 0x08, 0x04, 0},
396 /* 0x04 for some cards ?? */
399 .tuner_addr
= ADDR_UNSET
,
400 .audio_hook
= avermedia_tvphone_audio
,
403 .name
= "MATRIX-Vision MV-Delta",
409 .muxsel
= { 2, 3, 1, 0, 0},
413 .tuner_addr
= ADDR_UNSET
,
416 /* ---- card 0x08 ---------------------------------- */
417 .name
= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
423 .muxsel
= { 2, 3, 1, 1},
424 .audiomux
= { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
428 .tuner_addr
= ADDR_UNSET
,
430 .name
= "IMS/IXmicro TurboTV",
436 .muxsel
= { 2, 3, 1, 1},
437 .audiomux
= { 1, 1, 2, 3, 0},
440 .tuner_type
= TUNER_TEMIC_PAL
,
441 .tuner_addr
= ADDR_UNSET
,
443 .name
= "Hauppauge (bt878)",
448 .gpiomask
= 0x0f, /* old: 7 */
449 .muxsel
= { 2, 0, 1, 1},
450 .audiomux
= { 0, 1, 2, 3, 4},
454 .tuner_addr
= ADDR_UNSET
,
456 .name
= "MIRO PCTV pro",
462 .muxsel
= { 2, 3, 1, 1},
463 .audiomux
= { 0x20001,0x10001, 0, 0,10},
466 .tuner_addr
= ADDR_UNSET
,
469 /* ---- card 0x0c ---------------------------------- */
470 .name
= "ADS Technologies Channel Surfer TV (bt848)",
476 .muxsel
= { 2, 3, 1, 1},
477 .audiomux
= { 13, 14, 11, 7, 0, 0},
480 .tuner_addr
= ADDR_UNSET
,
482 .name
= "AVerMedia TVCapture 98",
488 .muxsel
= { 2, 3, 1, 1},
489 .audiomux
= { 13, 14, 11, 7, 0, 0},
493 .tuner_type
= TUNER_PHILIPS_PAL
,
494 .tuner_addr
= ADDR_UNSET
,
495 .audio_hook
= avermedia_tv_stereo_audio
,
497 .name
= "Aimslab Video Highway Xtreme (VHX)",
503 .muxsel
= { 2, 3, 1, 1},
504 .audiomux
= { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
508 .tuner_addr
= ADDR_UNSET
,
510 .name
= "Zoltrix TV-Max",
516 .muxsel
= { 2, 3, 1, 1},
517 .audiomux
= {0 , 0, 1 , 0, 10},
520 .tuner_addr
= ADDR_UNSET
,
523 /* ---- card 0x10 ---------------------------------- */
524 .name
= "Prolink Pixelview PlayTV (bt878)",
529 .gpiomask
= 0x01fe00,
530 .muxsel
= { 2, 3, 1, 1},
531 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
532 .audiomux
= { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
537 .name
= "Leadtek WinView 601",
542 .gpiomask
= 0x8300f8,
543 .muxsel
= { 2, 3, 1, 1,0},
544 .audiomux
= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
547 .tuner_addr
= ADDR_UNSET
,
548 .audio_hook
= winview_audio
,
551 .name
= "AVEC Intercapture",
557 .muxsel
= {2, 3, 1, 1},
558 .audiomux
= {1, 0, 0, 0, 0},
561 .tuner_addr
= ADDR_UNSET
,
563 .name
= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
568 .gpiomask
= 0x8dff00,
569 .muxsel
= { 2, 3, 1, 1},
573 .tuner_addr
= ADDR_UNSET
,
576 /* ---- card 0x14 ---------------------------------- */
577 .name
= "CEI Raffles Card",
582 .muxsel
= {2, 3, 1, 1},
584 .tuner_addr
= ADDR_UNSET
,
586 .name
= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
588 .audio_inputs
= 2, /* tuner, line in */
592 .muxsel
= { 2, 3, 1, 1},
593 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
595 .tuner_type
= TUNER_PHILIPS_PAL_I
,
596 .tuner_addr
= ADDR_UNSET
,
598 .name
= "Askey CPH050/ Phoebe Tv Master + FM",
604 .muxsel
= { 2, 3, 1, 1},
605 .audiomux
= {0, 1, 0x800, 0x400, 0xc00, 0},
609 .tuner_addr
= ADDR_UNSET
,
611 .name
= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
617 .muxsel
= { 2, 3, -1 },
618 .digital_mode
= DIGITAL_MODE_CAMERA
,
619 .audiomux
= { 0, 0, 0, 0, 0 },
622 .tuner_type
= TUNER_ALPS_TSBB5_PAL_I
,
623 .tuner_addr
= ADDR_UNSET
,
626 /* ---- card 0x18 ---------------------------------- */
627 .name
= "Askey CPH05X/06X (bt878) [many vendors]",
633 .muxsel
= { 2, 3, 1, 1},
634 .audiomux
= {0x400, 0x400, 0x400, 0x400, 0xc00},
638 .tuner_addr
= ADDR_UNSET
,
641 .name
= "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
646 .gpiomask
= 0x1f0fff,
647 .muxsel
= { 2, 3, 1, 1},
648 .audiomux
= { 0x20000, 0x30000, 0x10000, 0, 0x40000},
650 .tuner_type
= TUNER_PHILIPS_PAL
,
651 .tuner_addr
= ADDR_UNSET
,
652 .audio_hook
= terratv_audio
,
654 .name
= "Hauppauge WinCam newer (bt878)",
660 .muxsel
= { 2, 0, 1, 1},
661 .audiomux
= { 0, 1, 2, 3, 4},
664 .tuner_addr
= ADDR_UNSET
,
666 .name
= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
672 .muxsel
= { 2, 3, 1, 1},
673 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
675 .tuner_type
= TUNER_PHILIPS_SECAM
,
676 .tuner_addr
= ADDR_UNSET
,
679 /* ---- card 0x1c ---------------------------------- */
680 .name
= "Terratec TerraTV+ Version 1.1 (bt878)",
685 .gpiomask
= 0x1f0fff,
686 .muxsel
= { 2, 3, 1, 1},
687 .audiomux
= { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
689 .tuner_type
= TUNER_PHILIPS_PAL
,
690 .tuner_addr
= ADDR_UNSET
,
691 .audio_hook
= terratv_audio
,
693 External 20 pin connector (for Active Radio Upgrade board)
699 gpio05: om5610-stereo
703 gpio09+10: nIOR, nSEL ?? (bt878)
707 gpio16: u2-A0 (1st 4052bt)
710 gpio19: u4-A0 (2nd 4052)
714 00000 : Cdrom (internal audio input)
715 10000 : ext. Video audio input
724 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
725 .name
= "Imagenation PXC200",
729 .svhs
= 1, /* was: 4 */
731 .muxsel
= { 2, 3, 1, 0, 0},
735 .tuner_addr
= ADDR_UNSET
,
736 .muxsel_hook
= PXC200_muxsel
,
739 .name
= "Lifeview FlyVideo 98 LR50",
744 .gpiomask
= 0x1800, /* 0x8dfe00 */
745 .muxsel
= { 2, 3, 1, 1},
746 .audiomux
= { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
749 .tuner_addr
= ADDR_UNSET
,
751 .name
= "Formac iProTV, Formac ProTV I (bt848)",
757 .muxsel
= { 2, 3, 1, 1},
758 .audiomux
= { 1, 0, 0, 0, 0 },
760 .tuner_type
= TUNER_PHILIPS_PAL
,
761 .tuner_addr
= ADDR_UNSET
,
764 /* ---- card 0x20 ---------------------------------- */
765 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
771 .muxsel
= { 2, 3, 1, 1},
775 .tuner_addr
= ADDR_UNSET
,
777 .name
= "Terratec TerraTValue Version Bt878",
782 .gpiomask
= 0xffff00,
783 .muxsel
= { 2, 3, 1, 1},
784 .audiomux
= { 0x500, 0, 0x300, 0x900, 0x900},
787 .tuner_type
= TUNER_PHILIPS_PAL
,
788 .tuner_addr
= ADDR_UNSET
,
790 .name
= "Leadtek WinFast 2000/ WinFast 2000 XP",
795 .muxsel
= { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
796 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
797 .gpiomask
= 0xb33000,
798 .audiomux
= { 0x122000,0x1000,0x0000,0x620000,0x800000 },
799 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
800 gpio23 -- hef4052:nEnable (0x800000)
803 0x0000: external audio
807 Note: There exists another variant "Winfast 2000" with tv stereo !?
808 Note: eeprom only contains FF and pci subsystem id 107d:6606
813 .tuner_type
= 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
814 .tuner_addr
= ADDR_UNSET
,
815 .audio_hook
= winfast2000_audio
,
818 .name
= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
824 .muxsel
= { 2, 3, 1, 1},
825 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
828 .tuner_addr
= ADDR_UNSET
,
831 /* ---- card 0x24 ---------------------------------- */
832 .name
= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
838 .muxsel
= { 2, 3, 1, 1},
839 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
842 .tuner_addr
= ADDR_UNSET
,
845 .name
= "Prolink PixelView PlayTV pro",
851 .muxsel
= { 2, 3, 1, 1 },
852 .audiomux
= { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
856 .tuner_addr
= ADDR_UNSET
,
858 .name
= "Askey CPH06X TView99",
863 .gpiomask
= 0x551e00,
864 .muxsel
= { 2, 3, 1, 0},
865 .audiomux
= { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
869 .tuner_addr
= ADDR_UNSET
,
872 .name
= "Pinnacle PCTV Studio/Rave",
877 .gpiomask
= 0x03000F,
878 .muxsel
= { 2, 3, 1, 1},
879 .audiomux
= { 2, 0xd0001, 0, 0, 1},
883 .tuner_addr
= ADDR_UNSET
,
886 /* ---- card 0x28 ---------------------------------- */
887 .name
= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
893 .muxsel
= { 2, 3, 1, 1},
894 .audiomux
= { 4, 0, 2, 3, 1},
897 .tuner_type
= TUNER_PHILIPS_NTSC
,
898 .tuner_addr
= ADDR_UNSET
,
902 .name
= "AVerMedia TVPhone 98",
908 .muxsel
= { 2, 3, 1, 1},
909 .audiomux
= { 13, 4, 11, 7, 0, 0},
913 .tuner_addr
= ADDR_UNSET
,
915 .audio_hook
= avermedia_tvphone_audio
,
917 .name
= "ProVideo PV951", /* pic16c54 */
923 .muxsel
= { 2, 3, 1, 1},
924 .audiomux
= { 0, 0, 0, 0, 0},
929 .tuner_addr
= ADDR_UNSET
,
931 .name
= "Little OnAir TV",
937 .muxsel
= {2, 3, 1, 1},
938 .audiomux
= {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
941 .tuner_addr
= ADDR_UNSET
,
944 /* ---- card 0x2c ---------------------------------- */
945 .name
= "Sigma TVII-FM",
951 .muxsel
= {2, 3, 1, 1},
952 .audiomux
= {1, 1, 0, 2, 3},
956 .tuner_addr
= ADDR_UNSET
,
958 .name
= "MATRIX-Vision MV-Delta 2",
964 .muxsel
= { 2, 3, 1, 0, 0},
969 .tuner_addr
= ADDR_UNSET
,
971 .name
= "Zoltrix Genie TV/FM",
976 .gpiomask
= 0xbcf03f,
977 .muxsel
= { 2, 3, 1, 1},
978 .audiomux
= { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
982 .tuner_addr
= ADDR_UNSET
,
984 .name
= "Terratec TV/Radio+",
990 .muxsel
= { 2, 3, 1, 1},
991 .audiomux
= { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
996 .tuner_addr
= ADDR_UNSET
,
1000 /* ---- card 0x30 ---------------------------------- */
1001 .name
= "Askey CPH03x/ Dynalink Magic TView",
1007 .muxsel
= { 2, 3, 1, 1},
1008 .audiomux
= {2,0,0,0,1},
1012 .tuner_addr
= ADDR_UNSET
,
1014 .name
= "IODATA GV-BCTV3/PCI",
1019 .gpiomask
= 0x010f00,
1020 .muxsel
= {2, 3, 0, 0},
1021 .audiomux
= {0x10000, 0, 0x10000, 0, 0, 0},
1024 .tuner_type
= TUNER_ALPS_TSHC6_NTSC
,
1025 .tuner_addr
= ADDR_UNSET
,
1026 .audio_hook
= gvbctv3pci_audio
,
1028 .name
= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1033 .gpiomask
= 0xAA0000,
1034 .muxsel
= { 2,3,1,1,-1 },
1035 .digital_mode
= DIGITAL_MODE_CAMERA
,
1036 .audiomux
= { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
1039 .tuner_type
= TUNER_PHILIPS_PAL_I
,
1040 .tuner_addr
= ADDR_UNSET
,
1042 /* GPIO wiring: (different from Rev.4C !)
1043 GPIO17: U4.A0 (first hef4052bt)
1045 GPIO20: U5.A1 (second hef4052bt)
1047 GPIO22: BT832 Reset Line
1048 GPIO23: A5,A0, U5,nEN
1049 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1052 .name
= "Eagle Wireless Capricorn2 (bt878A)",
1058 .muxsel
= { 2, 0, 1, 1},
1059 .audiomux
= { 0, 1, 2, 3, 4},
1061 .tuner_type
= -1 /* TUNER_ALPS_TMDH2_NTSC */,
1062 .tuner_addr
= ADDR_UNSET
,
1065 /* ---- card 0x34 ---------------------------------- */
1066 /* David Härdeman <david@2gen.com> */
1067 .name
= "Pinnacle PCTV Studio Pro",
1072 .gpiomask
= 0x03000F,
1073 .muxsel
= { 2, 3, 1, 1},
1074 .audiomux
= { 1, 0xd0001, 0, 0, 10},
1075 /* sound path (5 sources):
1076 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1079 2= Mono TV sound from Tuner
1081 MUX2 (mask 0x30000):
1083 1= FM stereo Radio from Tuner */
1087 .tuner_addr
= ADDR_UNSET
,
1089 /* Claas Langbehn <claas@bigfoot.com>,
1090 Sven Grothklags <sven@upb.de> */
1091 .name
= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1097 .muxsel
= { 2, 3, 1, 1},
1098 .audiomux
= { 0, 0, 0x10, 8, 4 },
1101 .tuner_type
= TUNER_PHILIPS_PAL
,
1102 .tuner_addr
= ADDR_UNSET
,
1105 /* Tim Röstermundt <rosterm@uni-muenster.de>
1106 in de.comp.os.unix.linux.hardware:
1107 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1108 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1109 options tuner type=5 */
1110 .name
= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1116 .muxsel
= { 2, 3, 1, 1},
1117 .audiomux
= { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1118 /* For cards with tda9820/tda9821:
1119 0x0000: Tuner normal stereo
1120 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1121 0x0880: Tuner A2 stereo */
1124 .tuner_addr
= ADDR_UNSET
,
1126 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1127 old Easy TV BT848 version (model CPH031) */
1128 .name
= "Askey CPH031/ BESTBUY Easy TV",
1134 .muxsel
= { 2, 3, 1, 0},
1135 .audiomux
= { 2, 0, 0, 0, 10},
1138 .tuner_type
= TUNER_TEMIC_PAL
,
1139 .tuner_addr
= ADDR_UNSET
,
1142 /* ---- card 0x38 ---------------------------------- */
1143 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1144 .name
= "Lifeview FlyVideo 98FM LR50",
1150 .muxsel
= { 2, 3, 1, 1},
1151 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1154 .tuner_addr
= ADDR_UNSET
,
1156 /* This is the ultimate cheapo capture card
1157 * just a BT848A on a small PCB!
1158 * Steve Hosgood <steve@equiinet.com> */
1159 .name
= "GrandTec 'Grand Video Capture' (Bt848)",
1171 .tuner_addr
= ADDR_UNSET
,
1173 /* Daniel Herrington <daniel.herrington@home.com> */
1174 .name
= "Askey CPH060/ Phoebe TV Master Only (No FM)",
1180 .muxsel
= { 2, 3, 1, 1},
1181 .audiomux
= { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1184 .tuner_type
= TUNER_TEMIC_4036FY5_NTSC
,
1185 .tuner_addr
= ADDR_UNSET
,
1187 /* Matti Mottus <mottus@physic.ut.ee> */
1188 .name
= "Askey CPH03x TV Capturer",
1193 .gpiomask
= 0x03000F,
1194 .muxsel
= { 2, 3, 1, 0},
1195 .audiomux
= { 2,0,0,0,1 },
1198 .tuner_addr
= ADDR_UNSET
,
1201 /* ---- card 0x3c ---------------------------------- */
1202 /* Philip Blundell <philb@gnu.org> */
1203 .name
= "Modular Technology MM100PCTV",
1209 .muxsel
= { 2, 3, 1, 1},
1210 .audiomux
= { 2, 0, 0, 1, 8},
1212 .tuner_type
= TUNER_TEMIC_PAL
,
1213 .tuner_addr
= ADDR_UNSET
,
1215 /* Adrian Cox <adrian@humboldt.co.uk */
1216 .name
= "AG Electronics GMV1",
1228 .tuner_addr
= ADDR_UNSET
,
1230 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1231 new Easy TV BT878 version (model CPH061)
1232 special thanks to Informatica Mieres for providing the card */
1233 .name
= "Askey CPH061/ BESTBUY Easy TV (bt878)",
1239 .muxsel
= { 2, 3, 1, 0},
1240 .audiomux
= { 1, 0, 4, 4, 9},
1243 .tuner_type
= TUNER_PHILIPS_PAL
,
1244 .tuner_addr
= ADDR_UNSET
,
1246 /* Lukas Gebauer <geby@volny.cz> */
1247 .name
= "ATI TV-Wonder",
1253 .muxsel
= { 2, 3, 1, 0 },
1254 .audiomux
= { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1256 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1257 .tuner_addr
= ADDR_UNSET
,
1260 /* ---- card 0x40 ---------------------------------- */
1261 /* Lukas Gebauer <geby@volny.cz> */
1262 .name
= "ATI TV-Wonder VE",
1268 .muxsel
= { 2, 3, 0, 1},
1269 .audiomux
= { 0, 0, 1, 0, 0},
1272 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1273 .tuner_addr
= ADDR_UNSET
,
1275 /* DeeJay <deejay@westel900.net (2000S) */
1276 .name
= "Lifeview FlyVideo 2000S LR90",
1282 .muxsel
= { 2, 3, 0, 1},
1283 /* Radio changed from 1e80 to 0x800 to make
1284 FlyVideo2000S in .hu happy (gm)*/
1285 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1286 .audiomux
= { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1287 .audio_hook
= fv2000s_audio
,
1293 .tuner_addr
= ADDR_UNSET
,
1295 .name
= "Terratec TValueRadio",
1300 .gpiomask
= 0xffff00,
1301 .muxsel
= { 2, 3, 1, 1},
1302 .audiomux
= { 0x500, 0x500, 0x300, 0x900, 0x900},
1305 .tuner_type
= TUNER_PHILIPS_PAL
,
1306 .tuner_addr
= ADDR_UNSET
,
1309 /* TANAKA Kei <peg00625@nifty.com> */
1310 .name
= "IODATA GV-BCTV4/PCI",
1315 .gpiomask
= 0x010f00,
1316 .muxsel
= {2, 3, 0, 0},
1317 .audiomux
= {0x10000, 0, 0x10000, 0, 0, 0},
1320 .tuner_type
= TUNER_SHARP_2U5JF5540_NTSC
,
1321 .tuner_addr
= ADDR_UNSET
,
1322 .audio_hook
= gvbctv3pci_audio
,
1325 /* ---- card 0x44 ---------------------------------- */
1326 .name
= "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1327 /* try "insmod msp3400 simple=0" if you have
1328 * sound problems with this card. */
1333 .gpiomask
= 0x4f8a00,
1334 /* 0x100000: 1=MSP enabled (0=disable again)
1335 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1336 .audiomux
= {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1337 /* tvtuner, radio, external,internal, mute, stereo
1338 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1339 .muxsel
= { 2, 3 ,0 ,1},
1340 .tuner_type
= TUNER_MT2032
,
1341 .tuner_addr
= ADDR_UNSET
,
1345 /* Philip Blundell <pb@nexus.co.uk> */
1346 .name
= "Active Imaging AIMMS",
1351 .tuner_addr
= ADDR_UNSET
,
1356 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1357 .name
= "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1363 .muxsel
= { 2, 3, 1, 1},
1364 .audiomux
= { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
1368 .tuner_addr
= ADDR_UNSET
,
1371 GPIO0: U4.A0 (hef4052bt)
1373 GPIO2: U4.A1 (second hef4052bt)
1374 GPIO3: U4.nEN, U5.A0, A5.nEN
1378 .name
= "Lifeview FlyVideo 98EZ (capture only) LR51",
1383 .muxsel
= { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1386 .tuner_type
= UNSET
,
1387 .tuner_addr
= ADDR_UNSET
,
1390 /* ---- card 0x48 ---------------------------------- */
1391 /* Dariusz Kowalewski <darekk@automex.pl> */
1392 .name
= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1398 .muxsel
= { 2, 3, 1, 1 },
1399 .audiomux
= { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1405 .tuner_addr
= ADDR_UNSET
,
1406 .audio_hook
= pvbt878p9b_audio
, /* Note: not all cards have stereo */
1407 .has_radio
= 1, /* Note: not all cards have radio */
1414 GPIO20,22,23: R30,R29,R28
1417 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1418 /* you must jumper JP5 for the card to work */
1419 .name
= "Sensoray 311",
1425 .muxsel
= { 2, 3, 1, 0, 0},
1429 .tuner_addr
= ADDR_UNSET
,
1431 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1432 .name
= "RemoteVision MX (RV605)",
1438 .gpiomask2
= 0x07ff,
1439 .muxsel
= { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1440 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1444 .tuner_addr
= ADDR_UNSET
,
1445 .muxsel_hook
= rv605_muxsel
,
1447 .name
= "Powercolor MTV878/ MTV878R/ MTV878F",
1452 .gpiomask
= 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1453 .muxsel
= { 2, 1, 1, },
1454 .audiomux
= { 0, 1, 2, 2, 4 },
1456 .tuner_type
= TUNER_PHILIPS_PAL
,
1457 .tuner_addr
= ADDR_UNSET
,
1462 /* ---- card 0x4c ---------------------------------- */
1463 /* Masaki Suzuki <masaki@btree.org> */
1464 .name
= "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1469 .gpiomask
= 0x140007,
1470 .muxsel
= { 2, 3, 1, 1 },
1471 .audiomux
= { 0, 1, 2, 3, 4, 0 },
1472 .tuner_type
= TUNER_PHILIPS_NTSC
,
1473 .tuner_addr
= ADDR_UNSET
,
1474 .audio_hook
= windvr_audio
,
1476 .name
= "GrandTec Multi Capture Card (Bt878)",
1482 .muxsel
= { 2, 3, 1, 0 },
1488 .tuner_addr
= ADDR_UNSET
,
1490 .name
= "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1496 .muxsel
= { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1497 .audiomux
= { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
1498 * This card lacks external Audio In, so we mute it on Ext. & Int.
1499 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1500 * This card lacks PCI subsystem ID, sigh.
1501 * audiomux=1: lower volume, 2+3: mute
1502 * btwincap uses 0x80000/0x80003
1508 .tuner_addr
= ADDR_UNSET
,
1509 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1510 radio signal strength indicators work fine. */
1513 GPIO0,1: HEF4052 A0,A1
1514 GPIO2: HEF4052 nENABLE
1516 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1520 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1522 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1523 .name
= "DSP Design TCVIDEO",
1526 .muxsel
= { 2, 3, 1, 0},
1529 .tuner_addr
= ADDR_UNSET
,
1532 /* ---- card 0x50 ---------------------------------- */
1533 .name
= "Hauppauge WinTV PVR",
1538 .muxsel
= { 2, 0, 1, 1},
1542 .tuner_addr
= ADDR_UNSET
,
1547 .name
= "IODATA GV-BCTV5/PCI",
1552 .gpiomask
= 0x0f0f80,
1553 .muxsel
= {2, 3, 1, 0},
1554 .audiomux
= {0x030000, 0x010000, 0, 0, 0x020000, 0},
1557 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
1558 .tuner_addr
= ADDR_UNSET
,
1559 .audio_hook
= gvbctv5pci_audio
,
1562 .name
= "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1563 .video_inputs
= 4, /* id-inputs-clock */
1567 .muxsel
= { 3, 2, 0, 1 },
1570 .tuner_addr
= ADDR_UNSET
,
1575 .name
= "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1580 .muxsel
= { 2, 3, 1 },
1583 .tuner_addr
= ADDR_UNSET
,
1589 /* ---- card 0x54 ---------------------------------- */
1590 .name
= "Osprey 101 (848)", /* 0x05-40C0-C1 */
1598 .tuner_addr
= ADDR_UNSET
,
1603 .name
= "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1611 .tuner_addr
= ADDR_UNSET
,
1616 .name
= "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1624 .tuner_addr
= ADDR_UNSET
,
1629 .name
= "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1636 .tuner_type
= UNSET
,
1637 .tuner_addr
= ADDR_UNSET
,
1643 /* ---- card 0x58 ---------------------------------- */
1644 .name
= "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1651 .tuner_type
= UNSET
,
1652 .tuner_addr
= ADDR_UNSET
,
1657 .name
= "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1664 .tuner_type
= UNSET
,
1665 .tuner_addr
= ADDR_UNSET
,
1670 .name
= "Osprey 500", /* 500 */
1678 .tuner_addr
= ADDR_UNSET
,
1683 .name
= "Osprey 540", /* 540 */
1689 .tuner_addr
= ADDR_UNSET
,
1695 /* ---- card 0x5C ---------------------------------- */
1696 .name
= "Osprey 2000", /* 2000 */
1703 .tuner_type
= UNSET
,
1704 .tuner_addr
= ADDR_UNSET
,
1707 .no_tda7432
= 1, /* must avoid, conflicts with the bt860 */
1709 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1710 .name
= "IDS Eagle",
1715 .tuner_addr
= ADDR_UNSET
,
1718 .muxsel
= { 0, 1, 2, 3 },
1719 .muxsel_hook
= eagle_muxsel
,
1724 .name
= "Pinnacle PCTV Sat",
1730 .tuner_addr
= ADDR_UNSET
,
1735 .audiomux
= { 0, 0, 0, 0, 1 },
1736 .muxsel
= { 3, 0, 1, 2},
1742 .name
= "Formac ProTV II (bt878)",
1748 /* TV, Comp1, Composite over SVID con, SVID */
1749 .muxsel
= { 2, 3, 1, 1},
1750 .audiomux
= { 2, 2, 0, 0, 0 },
1753 .tuner_type
= TUNER_PHILIPS_PAL
,
1754 .tuner_addr
= ADDR_UNSET
,
1756 GPIO=0x00,0x01,0x03: mute (?)
1757 0x02: both TV and radio (tuner: FM1216/I)
1758 The card has onboard audio connectors labeled "cdrom" and "board",
1759 not soldered here, though unknown wiring.
1760 Card lacks: external audio in, pci subsystem id.
1764 /* ---- card 0x60 ---------------------------------- */
1771 .muxsel
= { 2, 3, 1, 1},
1772 .audiomux
= { 0, 1, 2, 3, 4},
1775 .tuner_addr
= ADDR_UNSET
,
1778 .name
= "Euresys Picolo",
1787 .muxsel
= { 2, 0, 1},
1789 .tuner_type
= UNSET
,
1790 .tuner_addr
= ADDR_UNSET
,
1792 /* Luc Van Hoeylandt <luc@e-magic.be> */
1793 .name
= "ProVideo PV150", /* 0x4f */
1804 .tuner_type
= UNSET
,
1805 .tuner_addr
= ADDR_UNSET
,
1807 /* Hiroshi Takekawa <sian@big.or.jp> */
1808 /* This card lacks subsystem ID */
1809 .name
= "AD-TVK503", /* 0x63 */
1814 .gpiomask
= 0x001e8007,
1815 .muxsel
= { 2, 3, 1, 0 },
1816 /* Tuner, Radio, external, internal, off, on */
1817 .audiomux
= { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
1822 .tuner_addr
= ADDR_UNSET
,
1823 .audio_hook
= adtvk503_audio
,
1826 /* ---- card 0x64 ---------------------------------- */
1827 .name
= "Hercules Smart TV Stereo",
1833 .muxsel
= { 2, 3, 1, 1 },
1838 .tuner_addr
= ADDR_UNSET
,
1840 - card lacks subsystem ID
1841 - stereo variant w/ daughter board with tda9874a @0xb0
1843 always from tda9874 independent of GPIO (?)
1844 external line in: unknown
1845 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1846 hef4053 (instead 4052) for unknown function
1849 .name
= "Pace TV & Radio Card",
1854 .muxsel
= { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
1859 .tuner_addr
= ADDR_UNSET
,
1862 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1863 only internal line out: (4pin header) RGGL
1864 Radio must be decoded by msp3410d (not routed through)*/
1866 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1869 /* Chris Willing <chris@vislab.usyd.edu.au> */
1875 .tuner_addr
= ADDR_UNSET
,
1881 .name
= "Grand X-Guard / Trust 814PCI",
1887 .tuner_addr
= ADDR_UNSET
,
1889 .muxsel
= { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
1890 .muxsel_hook
= xguard_muxsel
,
1897 /* ---- card 0x68 ---------------------------------- */
1898 .name
= "Nebula Electronics DigiTV",
1902 .muxsel
= { 2, 3, 1, 0},
1908 .tuner_addr
= ADDR_UNSET
,
1912 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1913 .name
= "ProVideo PV143",
1919 .muxsel
= { 2, 3, 1, 0 },
1925 .tuner_addr
= ADDR_UNSET
,
1927 /* M.Klahr@phytec.de */
1928 .name
= "PHYTEC VD-009-X1 MiniDIN (bt878)",
1931 .tuner
= -1, /* card has no tuner */
1934 .muxsel
= { 2, 3, 1, 0},
1935 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1939 .tuner_addr
= ADDR_UNSET
,
1941 .name
= "PHYTEC VD-009-X1 Combi (bt878)",
1944 .tuner
= -1, /* card has no tuner */
1947 .muxsel
= { 2, 3, 1, 1},
1948 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1952 .tuner_addr
= ADDR_UNSET
,
1955 /* ---- card 0x6c ---------------------------------- */
1956 .name
= "PHYTEC VD-009 MiniDIN (bt878)",
1959 .tuner
= -1, /* card has no tuner */
1962 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
1963 via the upper nibble of muxsel. here: used for
1964 xternal video-mux */
1965 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
1966 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1970 .tuner_addr
= ADDR_UNSET
,
1972 .name
= "PHYTEC VD-009 Combi (bt878)",
1975 .tuner
= -1, /* card has no tuner */
1978 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
1979 via the upper nibble of muxsel. here: used for
1980 xternal video-mux */
1981 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
1982 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1986 .tuner_addr
= ADDR_UNSET
,
1993 .tuner_addr
= ADDR_UNSET
,
1996 .muxsel
= { 2, 3, 1, 0 },
1999 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2002 .audio_inputs
= 0, /* card has no audio */
2003 .tuner
= -1, /* card has no tuner */
2005 .tuner_addr
= ADDR_UNSET
,
2006 .svhs
= -1, /* card has no svhs */
2012 .muxsel
= { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2013 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2014 .muxsel_hook
= ivc120_muxsel
,
2018 /* ---- card 0x70 ---------------------------------- */
2019 .name
= "pcHDTV HD-2000 TV",
2024 .muxsel
= { 2, 3, 1, 0},
2025 .tuner_type
= TUNER_PHILIPS_ATSC
,
2026 .tuner_addr
= ADDR_UNSET
,
2029 .name
= "Twinhan DST + clones",
2033 .tuner_type
= TUNER_ABSENT
,
2034 .tuner_addr
= ADDR_UNSET
,
2038 .name
= "Winfast VC100",
2043 .muxsel
= { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
2047 .tuner_type
= TUNER_ABSENT
,
2048 .tuner_addr
= ADDR_UNSET
,
2051 .name
= "Teppro TEV-560/InterVision IV-560",
2057 .muxsel
= { 2, 3, 1, 1},
2058 .audiomux
= { 1, 1, 1, 1, 0},
2060 .tuner_type
= TUNER_PHILIPS_PAL
,
2061 .tuner_addr
= ADDR_UNSET
,
2065 /* ---- card 0x74 ---------------------------------- */
2066 .name
= "SIMUS GVC1100",
2072 .tuner_addr
= ADDR_UNSET
,
2074 .muxsel
= { 2, 2, 2, 2},
2076 .muxsel_hook
= gvc1100_muxsel
,
2078 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2079 .name
= "NGS NGSTV+",
2083 .gpiomask
= 0x008007,
2084 .muxsel
= {2, 3, 0, 0},
2085 .audiomux
= {0, 0, 0, 0, 0x000003, 0},
2087 .tuner_type
= TUNER_PHILIPS_PAL
,
2088 .tuner_addr
= ADDR_UNSET
,
2091 /* http://linuxmedialabs.com */
2093 .video_inputs
= 4, /* IN1,IN2,IN3,IN4 */
2097 .muxsel
= { 2, 3, 1, 0 },
2103 .tuner_addr
= ADDR_UNSET
,
2105 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2106 .name
= "Tekram M205 PRO",
2110 .tuner_type
= TUNER_PHILIPS_PAL
,
2111 .tuner_addr
= ADDR_UNSET
,
2115 .muxsel
= { 2, 3, 1},
2116 .audiomux
= { 0x68, 0x68, 0x61, 0x61, 0x00 },
2120 /* ---- card 0x78 ---------------------------------- */
2121 /* Javier Cendan Ares <jcendan@lycos.es> */
2122 /* bt878 TV + FM without subsystem ID */
2123 .name
= "Conceptronic CONTVFMi",
2128 .gpiomask
= 0x008007,
2129 .muxsel
= { 2, 3, 1, 1 },
2130 .audiomux
= { 0, 1, 2, 2, 3 },
2133 .tuner_type
= TUNER_PHILIPS_PAL
,
2134 .tuner_addr
= ADDR_UNSET
,
2138 /*Eric DEBIEF <debief@telemsa.com>*/
2139 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2140 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
2142 .name
= "Euresys Picolo Tetra",
2148 .gpiomask2
= 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2152 .muxsel
= {2,2,2,2},/*878A input is always MUX0, see above.*/
2153 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2156 .muxsel_hook
= picolo_tetra_muxsel
,/*Required as it doesn't follow the classic input selection policy*/
2158 .tuner_addr
= ADDR_UNSET
,
2160 /* Spirit TV Tuner from http://spiritmodems.com.au */
2161 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2162 .name
= "Spirit TV Tuner",
2167 .gpiomask
= 0x0000000f,
2168 .muxsel
= { 2, 1, 1 },
2169 .audiomux
= { 0x02, 0x00, 0x00, 0x00, 0x00},
2170 .tuner_type
= TUNER_TEMIC_PAL
,
2171 .tuner_addr
= ADDR_UNSET
,
2175 /* Wolfram Joost <wojo@frokaschwei.de> */
2176 .name
= "AVerMedia AVerTV DVB-T 771",
2180 .tuner_type
= TUNER_ABSENT
,
2181 .tuner_addr
= ADDR_UNSET
,
2182 .muxsel
= { 3 , 3 },
2191 /* ---- card 0x7c ---------------------------------- */
2192 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2193 /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
2194 .name
= "AverMedia AverTV DVB-T 761",
2198 .muxsel
= { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2204 .tuner_addr
= ADDR_UNSET
,
2209 /* andre.schwarz@matrix-vision.de */
2210 .name
= "MATRIX Vision Sigma-SQ",
2216 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2,
2217 3, 3, 3, 3, 3, 3, 3, 3 },
2218 .muxsel_hook
= sigmaSQ_muxsel
,
2223 .tuner_addr
= ADDR_UNSET
,
2225 /* andre.schwarz@matrix-vision.de */
2226 .name
= "MATRIX Vision Sigma-SLC",
2232 .muxsel
= { 2, 2, 2, 2 },
2233 .muxsel_hook
= sigmaSLC_muxsel
,
2238 .tuner_addr
= ADDR_UNSET
,
2240 /* BTTV_APAC_VIEWCOMP */
2241 /* Attila Kondoros <attila.kondoros@chello.hu> */
2242 /* bt878 TV + FM 0x00000000 subsystem ID */
2243 .name
= "APAC Viewcomp 878(AMAX)",
2249 .muxsel
= { 2, 3, 1, 1},
2250 .audiomux
= { 2, 0, 0, 0, 10},
2253 .tuner_type
= TUNER_PHILIPS_PAL
,
2254 .tuner_addr
= ADDR_UNSET
,
2255 .has_remote
= 1, /* miniremote works, see ir-kbd-gpio.c */
2256 .has_radio
= 1, /* not every card has radio */
2259 /* ---- card 0x80 ---------------------------------- */
2260 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2261 .name
= "DViCO FusionHDTV DVB-T Lite",
2270 .tuner_addr
= ADDR_UNSET
,
2272 /* Steven <photon38@pchome.com.tw> */
2273 .name
= "V-Gear MyVCD",
2279 .muxsel
= {2, 3, 1, 0},
2280 .audiomux
= {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2283 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
2284 .tuner_addr
= ADDR_UNSET
,
2287 /* Rick C <cryptdragoon@gmail.com> */
2288 .name
= "Super TV Tuner",
2293 .muxsel
= { 2, 3, 1, 0},
2294 .tuner_type
= TUNER_PHILIPS_NTSC
,
2295 .tuner_addr
= ADDR_UNSET
,
2296 .gpiomask
= 0x008007,
2297 .audiomux
= { 0, 0x000001,0,0, 0},
2301 /* Chris Fanning <video4linux@haydon.net> */
2302 .name
= "Tibet Systems 'Progress DVR' CS16",
2307 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2313 .tuner_addr
= ADDR_UNSET
,
2314 .muxsel_hook
= tibetCS16_muxsel
,
2317 /* Bill Brack <wbrack@mmm.com.hk> */
2319 * Note that, because of the card's wiring, the "master"
2320 * BT878A chip (i.e. the one which controls the analog switch
2321 * and must use this card type) is the 2nd one detected. The
2322 * other 3 chips should use card type 0x85, whose description
2323 * follows this one. There is a EEPROM on the card (which is
2324 * connected to the I2C of one of those other chips), but is
2325 * not currently handled. There is also a facility for a
2326 * "monitor", which is also not currently implemented.
2328 .name
= "Kodicom 4400R (master)",
2333 .tuner_addr
= ADDR_UNSET
,
2335 /* GPIO bits 0-9 used for analog switch:
2336 * 00 - 03: camera selector
2337 * 04 - 06: channel (controller) selector
2338 * 07: data (1->on, 0->off)
2341 * bit 16 is input from sync separator for the channel
2343 .gpiomask
= 0x0003ff,
2345 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2350 .muxsel_hook
= kodicom4400r_muxsel
,
2353 /* Bill Brack <wbrack@mmm.com.hk> */
2354 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2355 * one which controls the analog switch, and must use the card type)
2356 * is the 2nd one detected. The other 3 chips should use this card
2359 .name
= "Kodicom 4400R (slave)",
2364 .tuner_addr
= ADDR_UNSET
,
2366 .gpiomask
= 0x010000,
2368 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2373 .muxsel_hook
= kodicom4400r_muxsel
,
2376 /* ---- card 0x86---------------------------------- */
2377 /* Michael Henson <mhenson@clarityvi.com> */
2378 /* Adlink RTV24 with special unlock codes */
2379 .name
= "Adlink RTV24",
2384 .muxsel
= { 2, 3, 1, 0},
2386 .tuner_addr
= ADDR_UNSET
,
2390 /* ---- card 0x87---------------------------------- */
2391 /* Michael Krufky <mkrufky@m1k.net> */
2392 .name
= "DViCO FusionHDTV 5 Lite",
2394 .tuner_type
= TUNER_LG_TDVS_H062F
,
2395 .tuner_addr
= ADDR_UNSET
,
2400 .gpiomask
= 0x00e00007,
2401 .audiomux
= { 0x00400005, 0, 0, 0, 0, 0 },
2406 /* ---- card 0x88---------------------------------- */
2407 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2408 .name
= "Acorp Y878F",
2413 .gpiomask
= 0x01fe00,
2414 .muxsel
= { 2, 3, 1, 1},
2415 .audiomux
= { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
2418 .tuner_type
= TUNER_YMEC_TVF66T5_B_DFF
,
2419 .tuner_addr
= 0xc1 >>1,
2423 static const unsigned int bttv_num_tvcards
= ARRAY_SIZE(bttv_tvcards
);
2425 /* ----------------------------------------------------------------------- */
2427 static unsigned char eeprom_data
[256];
2432 void __devinit
bttv_idcard(struct bttv
*btv
)
2434 unsigned int gpiobits
;
2438 /* read PCI subsystem ID */
2439 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_ID
, &tmp
);
2440 btv
->cardid
= tmp
<< 16;
2441 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_VENDOR_ID
, &tmp
);
2444 if (0 != btv
->cardid
&& 0xffffffff != btv
->cardid
) {
2445 /* look for the card */
2446 for (type
= -1, i
= 0; cards
[i
].id
!= 0; i
++)
2447 if (cards
[i
].id
== btv
->cardid
)
2452 printk(KERN_INFO
"bttv%d: detected: %s [card=%d], "
2453 "PCI subsystem ID is %04x:%04x\n",
2454 btv
->c
.nr
,cards
[type
].name
,cards
[type
].cardnr
,
2455 btv
->cardid
& 0xffff,
2456 (btv
->cardid
>> 16) & 0xffff);
2457 btv
->c
.type
= cards
[type
].cardnr
;
2460 printk(KERN_INFO
"bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2461 btv
->c
.nr
, btv
->cardid
& 0xffff,
2462 (btv
->cardid
>> 16) & 0xffff);
2463 printk(KERN_DEBUG
"please mail id, board name and "
2464 "the correct card= insmod option to kraxel@bytesex.org\n");
2468 /* let the user override the autodetected type */
2469 if (card
[btv
->c
.nr
] < bttv_num_tvcards
)
2470 btv
->c
.type
=card
[btv
->c
.nr
];
2472 /* print which card config we are using */
2473 printk(KERN_INFO
"bttv%d: using: %s [card=%d,%s]\n",btv
->c
.nr
,
2474 bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
,
2475 card
[btv
->c
.nr
] < bttv_num_tvcards
2476 ? "insmod option" : "autodetected");
2478 /* overwrite gpio stuff ?? */
2479 if (UNSET
== audioall
&& UNSET
== audiomux
[0])
2482 if (UNSET
!= audiomux
[0]) {
2484 for (i
= 0; i
< 5; i
++) {
2485 bttv_tvcards
[btv
->c
.type
].audiomux
[i
] = audiomux
[i
];
2486 gpiobits
|= audiomux
[i
];
2489 gpiobits
= audioall
;
2490 for (i
= 0; i
< 5; i
++) {
2491 bttv_tvcards
[btv
->c
.type
].audiomux
[i
] = audioall
;
2494 bttv_tvcards
[btv
->c
.type
].gpiomask
= (UNSET
!= gpiomask
) ? gpiomask
: gpiobits
;
2495 printk(KERN_INFO
"bttv%d: gpio config override: mask=0x%x, mux=",
2496 btv
->c
.nr
,bttv_tvcards
[btv
->c
.type
].gpiomask
);
2497 for (i
= 0; i
< 5; i
++) {
2498 printk("%s0x%x", i
? "," : "", bttv_tvcards
[btv
->c
.type
].audiomux
[i
]);
2504 * (most) board specific initialisations goes here
2507 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2508 void identify_by_eeprom(struct bttv
*btv
, unsigned char eeprom_data
[256])
2512 if (0 == strncmp(eeprom_data
,"GET MM20xPCTV",13))
2513 type
= BTTV_MODTEC_205
;
2514 else if (0 == strncmp(eeprom_data
+20,"Picolo",7))
2515 type
= BTTV_EURESYS_PICOLO
;
2516 else if (eeprom_data
[0] == 0x84 && eeprom_data
[2]== 0)
2517 type
= BTTV_HAUPPAUGE
; /* old bt848 */
2521 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2522 btv
->c
.nr
, bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
);
2526 static void flyvideo_gpio(struct bttv
*btv
)
2528 int gpio
,has_remote
,has_radio
,is_capture_only
,is_lr90
,has_tda9820_tda9821
;
2531 gpio_inout(0xffffff, 0);
2532 udelay(8); /* without this we would see the 0x1800 mask */
2534 /* FIXME: must restore OUR_EN ??? */
2536 /* all cards provide GPIO info, some have an additional eeprom
2537 * LR50: GPIO coding can be found lower right CP1 .. CP9
2538 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2540 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2542 * lowest 3 bytes are remote control codes (no handshake needed)
2543 * xxxFFF: No remote control chip soldered
2544 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2545 * Note: Some bits are Audio_Mask !
2547 ttype
=(gpio
&0x0f0000)>>16;
2549 case 0x0: tuner
=2; /* NTSC, e.g. TPI8NSR11P */
2551 case 0x2: tuner
=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
2553 case 0x4: tuner
=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2555 case 0x6: tuner
=37;/* LG PAL (newer TAPC series) TAPC-G702P */
2557 case 0xC: tuner
=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2560 printk(KERN_INFO
"bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv
->c
.nr
);
2563 has_remote
= gpio
& 0x800000;
2564 has_radio
= gpio
& 0x400000;
2565 /* unknown 0x200000;
2566 * unknown2 0x100000; */
2567 is_capture_only
= !(gpio
& 0x008000); /* GPIO15 */
2568 has_tda9820_tda9821
= !(gpio
& 0x004000);
2569 is_lr90
= !(gpio
& 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2571 * gpio & 0x001000 output bit for audio routing */
2574 tuner
=4; /* No tuner present */
2576 printk(KERN_INFO
"bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2577 btv
->c
.nr
, has_radio
? "yes":"no ", has_remote
? "yes":"no ", tuner
, gpio
);
2578 printk(KERN_INFO
"bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2579 btv
->c
.nr
, is_lr90
?"yes":"no ", has_tda9820_tda9821
?"yes":"no ",
2580 is_capture_only
?"yes":"no ");
2582 if(tuner
!= -1) /* only set if known tuner autodetected, else let insmod option through */
2583 btv
->tuner_type
= tuner
;
2584 btv
->has_radio
= has_radio
;
2586 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2587 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2588 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
2589 if(has_tda9820_tda9821
) btv
->audio_hook
= lt9415_audio
;
2590 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
2593 static int miro_tunermap
[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2594 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2595 static int miro_fmtuner
[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2596 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2598 static void miro_pinnacle_gpio(struct bttv
*btv
)
2603 gpio_inout(0xffffff, 0);
2605 id
= ((gpio
>>10) & 63) -1;
2606 msp
= bttv_I2CRead(btv
, I2C_MSP3400
, "MSP34xx");
2608 btv
->tuner_type
= miro_tunermap
[id
];
2609 if (0 == (gpio
& 0x20)) {
2611 if (!miro_fmtuner
[id
]) {
2612 btv
->has_matchbox
= 1;
2613 btv
->mbox_we
= (1<<6);
2614 btv
->mbox_most
= (1<<7);
2615 btv
->mbox_clk
= (1<<8);
2616 btv
->mbox_data
= (1<<9);
2617 btv
->mbox_mask
= (1<<6)|(1<<7)|(1<<8)|(1<<9);
2623 if (btv
->c
.type
== BTTV_MIRO
)
2624 btv
->c
.type
= BTTV_MIROPRO
;
2625 if (btv
->c
.type
== BTTV_PINNACLE
)
2626 btv
->c
.type
= BTTV_PINNACLEPRO
;
2629 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2630 btv
->c
.nr
, id
+1, btv
->tuner_type
,
2631 !btv
->has_radio
? "no" :
2632 (btv
->has_matchbox
? "matchbox" : "fmtuner"),
2633 (-1 == msp
) ? "no" : "yes");
2635 /* new cards with microtune tuner */
2640 info
= "PAL / mono";
2643 info
= "PAL+SECAM / stereo";
2647 info
= "NTSC / stereo";
2651 info
= "PAL+SECAM / mono";
2654 info
= "NTSC / mono";
2657 info
= "NTSC / stereo";
2660 info
= "PAL / stereo";
2663 info
= "oops: unknown card";
2667 btv
->c
.type
= BTTV_PINNACLEPRO
;
2669 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2670 btv
->c
.nr
, id
, info
, btv
->has_radio
? "yes" : "no");
2671 btv
->tuner_type
= 33;
2672 btv
->pinnacle_id
= id
;
2676 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
2677 #define LM1882_SYNC_DRIVE 0x200000L
2679 static void init_ids_eagle(struct bttv
*btv
)
2681 gpio_inout(0xffffff,0xFFFF37);
2682 gpio_write(0x200020);
2684 /* flash strobe inverter ?! */
2685 gpio_write(0x200024);
2687 /* switch sync drive off */
2688 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
2690 /* set BT848 muxel to 2 */
2691 btaor((2)<<5, ~(2<<5), BT848_IFORM
);
2694 /* Muxsel helper for the IDS Eagle.
2695 * the eagles does not use the standard muxsel-bits but
2696 * has its own multiplexer */
2697 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
)
2699 btaor((2)<<5, ~(3<<5), BT848_IFORM
);
2700 gpio_bits(3,bttv_tvcards
[btv
->c
.type
].muxsel
[input
&7]);
2703 /* set chroma ADC to sleep */
2704 btor(BT848_ADC_C_SLEEP
, BT848_ADC
);
2705 /* set to composite video */
2706 btand(~BT848_CONTROL_COMP
, BT848_E_CONTROL
);
2707 btand(~BT848_CONTROL_COMP
, BT848_O_CONTROL
);
2709 /* switch sync drive off */
2710 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
2713 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
)
2715 static const int masks
[] = {0x30, 0x01, 0x12, 0x23};
2716 gpio_write(masks
[input
%4]);
2719 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2722 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2723 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
2725 IN - sensor inputs, INx - sensor inputs and TI XORed together
2726 O1,O2,O3 - alarm outputs (relays)
2728 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
2732 static void init_lmlbt4x(struct bttv
*btv
)
2734 printk(KERN_DEBUG
"LMLBT4x init\n");
2735 btwrite(0x000000, BT848_GPIO_REG_INP
);
2736 gpio_inout(0xffffff, 0x0006C0);
2737 gpio_write(0x000000);
2740 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
)
2742 unsigned int inmux
= input
% 8;
2743 gpio_inout( 0xf, 0xf );
2744 gpio_bits( 0xf, inmux
);
2747 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
)
2749 unsigned int inmux
= input
% 4;
2750 gpio_inout( 3<<9, 3<<9 );
2751 gpio_bits( 3<<9, inmux
<<9 );
2754 /* ----------------------------------------------------------------------- */
2756 static void bttv_reset_audio(struct bttv
*btv
)
2759 * BT878A has a audio-reset register.
2760 * 1. This register is an audio reset function but it is in
2761 * function-0 (video capture) address space.
2762 * 2. It is enough to do this once per power-up of the card.
2763 * 3. There is a typo in the Conexant doc -- it is not at
2764 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2765 * --//Shrikumar 030609
2771 printk("bttv%d: BT878A ARESET\n",btv
->c
.nr
);
2772 btwrite((1<<7), 0x058);
2777 /* initialization part one -- before registering i2c bus */
2778 void __devinit
bttv_init_card1(struct bttv
*btv
)
2780 switch (btv
->c
.type
) {
2781 case BTTV_HAUPPAUGE
:
2782 case BTTV_HAUPPAUGE878
:
2783 boot_msp34xx(btv
,5);
2785 case BTTV_VOODOOTV_FM
:
2786 boot_msp34xx(btv
,20);
2788 case BTTV_AVERMEDIA98
:
2789 boot_msp34xx(btv
,11);
2791 case BTTV_HAUPPAUGEPVR
:
2794 case BTTV_TWINHAN_DST
:
2795 case BTTV_AVDVBT_771
:
2796 btv
->use_i2c_hw
= 1;
2798 case BTTV_ADLINK_RTV24
:
2803 if (!bttv_tvcards
[btv
->c
.type
].has_dvb
)
2804 bttv_reset_audio(btv
);
2807 /* initialization part two -- after registering i2c bus */
2808 void __devinit
bttv_init_card2(struct bttv
*btv
)
2811 int addr
=ADDR_UNSET
;
2813 btv
->tuner_type
= -1;
2815 if (BTTV_UNKNOWN
== btv
->c
.type
) {
2816 bttv_readee(btv
,eeprom_data
,0xa0);
2817 identify_by_eeprom(btv
,eeprom_data
);
2820 switch (btv
->c
.type
) {
2824 case BTTV_PINNACLEPRO
:
2826 miro_pinnacle_gpio(btv
);
2828 case BTTV_FLYVIDEO_98
:
2830 case BTTV_LIFE_FLYKIT
:
2832 case BTTV_TYPHOON_TVIEW
:
2833 case BTTV_CHRONOS_VS2
:
2834 case BTTV_FLYVIDEO_98FM
:
2835 case BTTV_FLYVIDEO2000
:
2836 case BTTV_FLYVIDEO98EZ
:
2837 case BTTV_CONFERENCETV
:
2838 case BTTV_LIFETEC_9415
:
2841 case BTTV_HAUPPAUGE
:
2842 case BTTV_HAUPPAUGE878
:
2843 case BTTV_HAUPPAUGEPVR
:
2844 /* pick up some config infos from the eeprom */
2845 bttv_readee(btv
,eeprom_data
,0xa0);
2846 hauppauge_eeprom(btv
);
2848 case BTTV_AVERMEDIA98
:
2849 case BTTV_AVPHONE98
:
2850 bttv_readee(btv
,eeprom_data
,0xa0);
2851 avermedia_eeprom(btv
);
2856 case BTTV_PICOLO_TETRA_CHIP
:
2857 picolo_tetra_init(btv
);
2861 btv
->has_matchbox
= 1;
2862 btv
->mbox_we
= 0x20;
2864 btv
->mbox_clk
= 0x08;
2865 btv
->mbox_data
= 0x10;
2866 btv
->mbox_mask
= 0x38;
2868 case BTTV_VOBIS_BOOSTAR
:
2870 terratec_active_radio_upgrade(btv
);
2872 case BTTV_MAGICTVIEW061
:
2873 if (btv
->cardid
== 0x3002144f) {
2875 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv
->c
.nr
);
2879 if (btv
->cardid
== 0x3060121a) {
2880 /* Fix up entry for 3DFX VoodooTV 100,
2881 which is an OEM STB card variant. */
2883 btv
->tuner_type
=TUNER_TEMIC_NTSC
;
2886 case BTTV_OSPREY1x0
:
2887 case BTTV_OSPREY1x0_848
:
2888 case BTTV_OSPREY101_848
:
2889 case BTTV_OSPREY1x1
:
2890 case BTTV_OSPREY1x1_SVID
:
2891 case BTTV_OSPREY2xx
:
2892 case BTTV_OSPREY2x0_SVID
:
2893 case BTTV_OSPREY2x0
:
2894 case BTTV_OSPREY500
:
2895 case BTTV_OSPREY540
:
2896 case BTTV_OSPREY2000
:
2897 bttv_readee(btv
,eeprom_data
,0xa0);
2900 case BTTV_IDS_EAGLE
:
2901 init_ids_eagle(btv
);
2903 case BTTV_MODTEC_205
:
2904 bttv_readee(btv
,eeprom_data
,0xa0);
2910 case BTTV_TIBET_CS16
:
2911 tibetCS16_init(btv
);
2913 case BTTV_KODICOM_4400R
:
2914 kodicom4400r_init(btv
);
2918 /* pll configuration */
2919 if (!(btv
->id
==848 && btv
->revision
==0x11)) {
2920 /* defaults from card list */
2921 if (PLL_28
== bttv_tvcards
[btv
->c
.type
].pll
) {
2922 btv
->pll
.pll_ifreq
=28636363;
2923 btv
->pll
.pll_crystal
=BT848_IFORM_XT0
;
2925 if (PLL_35
== bttv_tvcards
[btv
->c
.type
].pll
) {
2926 btv
->pll
.pll_ifreq
=35468950;
2927 btv
->pll
.pll_crystal
=BT848_IFORM_XT1
;
2929 /* insmod options can override */
2930 switch (pll
[btv
->c
.nr
]) {
2932 btv
->pll
.pll_crystal
= 0;
2933 btv
->pll
.pll_ifreq
= 0;
2934 btv
->pll
.pll_ofreq
= 0;
2936 case 1: /* 28 MHz */
2938 btv
->pll
.pll_ifreq
= 28636363;
2939 btv
->pll
.pll_ofreq
= 0;
2940 btv
->pll
.pll_crystal
= BT848_IFORM_XT0
;
2942 case 2: /* 35 MHz */
2944 btv
->pll
.pll_ifreq
= 35468950;
2945 btv
->pll
.pll_ofreq
= 0;
2946 btv
->pll
.pll_crystal
= BT848_IFORM_XT1
;
2950 btv
->pll
.pll_current
= -1;
2952 /* tuner configuration (from card list / autodetect / insmod option) */
2953 if (ADDR_UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_addr
)
2954 addr
= bttv_tvcards
[btv
->c
.type
].tuner_addr
;
2956 if (UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_type
)
2957 if(UNSET
== btv
->tuner_type
)
2958 btv
->tuner_type
= bttv_tvcards
[btv
->c
.type
].tuner_type
;
2959 if (UNSET
!= tuner
[btv
->c
.nr
])
2960 btv
->tuner_type
= tuner
[btv
->c
.nr
];
2961 printk("bttv%d: using tuner=%d\n",btv
->c
.nr
,btv
->tuner_type
);
2962 if (btv
->pinnacle_id
!= UNSET
)
2963 bttv_call_i2c_clients(btv
, AUDC_CONFIG_PINNACLE
,
2965 if (btv
->tuner_type
!= UNSET
) {
2966 struct tuner_setup tun_setup
;
2968 tun_setup
.mode_mask
= T_RADIO
| T_ANALOG_TV
| T_DIGITAL_TV
;
2969 tun_setup
.type
= btv
->tuner_type
;
2970 tun_setup
.addr
= addr
;
2972 bttv_call_i2c_clients(btv
, TUNER_SET_TYPE_ADDR
, &tun_setup
);
2975 btv
->svhs
= bttv_tvcards
[btv
->c
.type
].svhs
;
2976 if (svhs
[btv
->c
.nr
] != UNSET
)
2977 btv
->svhs
= svhs
[btv
->c
.nr
];
2978 if (remote
[btv
->c
.nr
] != UNSET
)
2979 btv
->has_remote
= remote
[btv
->c
.nr
];
2981 if (bttv_tvcards
[btv
->c
.type
].has_radio
)
2983 if (bttv_tvcards
[btv
->c
.type
].has_remote
)
2985 if (bttv_tvcards
[btv
->c
.type
].no_gpioirq
)
2987 if (bttv_tvcards
[btv
->c
.type
].audio_hook
)
2988 btv
->audio_hook
=bttv_tvcards
[btv
->c
.type
].audio_hook
;
2990 if (bttv_tvcards
[btv
->c
.type
].digital_mode
== DIGITAL_MODE_CAMERA
) {
2991 /* detect Bt832 chip for quartzsight digital camera */
2992 if ((bttv_I2CRead(btv
, I2C_BT832_ALT1
, "Bt832") >=0) ||
2993 (bttv_I2CRead(btv
, I2C_BT832_ALT2
, "Bt832") >=0))
3000 /* try to detect audio/fader chips */
3001 if (!bttv_tvcards
[btv
->c
.type
].no_msp34xx
&&
3002 bttv_I2CRead(btv
, I2C_MSP3400
, "MSP34xx") >=0)
3003 request_module("msp3400");
3005 if (bttv_tvcards
[btv
->c
.type
].msp34xx_alt
&&
3006 bttv_I2CRead(btv
, I2C_MSP3400_ALT
, "MSP34xx (alternate address)") >=0)
3007 request_module("msp3400");
3009 if (!bttv_tvcards
[btv
->c
.type
].no_tda9875
&&
3010 bttv_I2CRead(btv
, I2C_TDA9875
, "TDA9875") >=0)
3011 request_module("tda9875");
3013 if (!bttv_tvcards
[btv
->c
.type
].no_tda7432
&&
3014 bttv_I2CRead(btv
, I2C_TDA7432
, "TDA7432") >=0)
3015 request_module("tda7432");
3017 if (bttv_tvcards
[btv
->c
.type
].needs_tvaudio
)
3018 request_module("tvaudio");
3022 if (btv
->pinnacle_id
!= UNSET
)
3024 if (0 == tda9887
&& 0 == bttv_tvcards
[btv
->c
.type
].has_dvb
&&
3025 bttv_I2CRead(btv
, I2C_TDA9887
, "TDA9887") >=0)
3027 if((btv
->tuner_type
== TUNER_PHILIPS_FM1216ME_MK3
) ||
3028 (btv
->tuner_type
== TUNER_PHILIPS_FM1236_MK3
) ||
3029 (btv
->tuner_type
== TUNER_PHILIPS_FM1256_IH3
) ||
3031 request_module("tda9887");
3032 if (btv
->tuner_type
!= UNSET
)
3033 request_module("tuner");
3037 /* ----------------------------------------------------------------------- */
3039 static void modtec_eeprom(struct bttv
*btv
)
3041 if( strncmp(&(eeprom_data
[0x1e]),"Temic 4066 FY5",14) ==0) {
3042 btv
->tuner_type
=TUNER_TEMIC_4066FY5_PAL_I
;
3043 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3044 btv
->c
.nr
,&eeprom_data
[0x1e]);
3045 } else if (strncmp(&(eeprom_data
[0x1e]),"Alps TSBB5",10) ==0) {
3046 btv
->tuner_type
=TUNER_ALPS_TSBB5_PAL_I
;
3047 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3048 btv
->c
.nr
,&eeprom_data
[0x1e]);
3049 } else if (strncmp(&(eeprom_data
[0x1e]),"Philips FM1246",14) ==0) {
3050 btv
->tuner_type
=TUNER_PHILIPS_NTSC
;
3051 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3052 btv
->c
.nr
,&eeprom_data
[0x1e]);
3054 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3055 btv
->c
.nr
,&eeprom_data
[0x1e]);
3059 static void __devinit
hauppauge_eeprom(struct bttv
*btv
)
3063 tveeprom_hauppauge_analog(&btv
->i2c_client
, &tv
, eeprom_data
);
3064 btv
->tuner_type
= tv
.tuner_type
;
3065 btv
->has_radio
= tv
.has_radio
;
3068 static int terratec_active_radio_upgrade(struct bttv
*btv
)
3073 btv
->has_matchbox
= 1;
3074 btv
->mbox_we
= 0x10;
3075 btv
->mbox_most
= 0x20;
3076 btv
->mbox_clk
= 0x08;
3077 btv
->mbox_data
= 0x04;
3078 btv
->mbox_mask
= 0x3c;
3080 btv
->mbox_iow
= 1 << 8;
3081 btv
->mbox_ior
= 1 << 9;
3082 btv
->mbox_csel
= 1 << 10;
3085 tea5757_write(btv
, 5 * freq
+ 0x358); /* write 0x1ed8 */
3086 if (0x1ed8 == tea5757_read(btv
)) {
3087 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3090 btv
->has_matchbox
= 1;
3093 btv
->has_matchbox
= 0;
3099 /* ----------------------------------------------------------------------- */
3102 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3104 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3105 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3106 * unpacked with unzip).
3108 #define PVR_GPIO_DELAY 10
3110 #define BTTV_ALT_DATA 0x000001
3111 #define BTTV_ALT_DCLK 0x100000
3112 #define BTTV_ALT_NCONFIG 0x800000
3114 static int __devinit
pvr_altera_load(struct bttv
*btv
, u8
*micro
, u32 microlen
)
3120 gpio_inout(0xffffff,BTTV_ALT_DATA
|BTTV_ALT_DCLK
|BTTV_ALT_NCONFIG
);
3122 udelay(PVR_GPIO_DELAY
);
3124 gpio_write(BTTV_ALT_NCONFIG
);
3125 udelay(PVR_GPIO_DELAY
);
3127 for (n
= 0; n
< microlen
; n
++) {
3129 for ( i
= 0 ; i
< 8 ; i
++ ) {
3130 gpio_bits(BTTV_ALT_DCLK
,0);
3132 gpio_bits(BTTV_ALT_DATA
,BTTV_ALT_DATA
);
3134 gpio_bits(BTTV_ALT_DATA
,0);
3135 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3139 gpio_bits(BTTV_ALT_DCLK
,0);
3140 udelay(PVR_GPIO_DELAY
);
3142 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3143 for (i
= 0 ; i
< 30 ; i
++) {
3144 gpio_bits(BTTV_ALT_DCLK
,0);
3145 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3147 gpio_bits(BTTV_ALT_DCLK
,0);
3151 static int __devinit
pvr_boot(struct bttv
*btv
)
3153 const struct firmware
*fw_entry
;
3156 rc
= request_firmware(&fw_entry
, "hcwamc.rbf", &btv
->c
.pci
->dev
);
3158 printk(KERN_WARNING
"bttv%d: no altera firmware [via hotplug]\n",
3162 rc
= pvr_altera_load(btv
, fw_entry
->data
, fw_entry
->size
);
3163 printk(KERN_INFO
"bttv%d: altera firmware upload %s\n",
3164 btv
->c
.nr
, (rc
< 0) ? "failed" : "ok");
3165 release_firmware(fw_entry
);
3169 /* ----------------------------------------------------------------------- */
3170 /* some osprey specific stuff */
3172 static void __devinit
osprey_eeprom(struct bttv
*btv
)
3175 unsigned char *ee
= eeprom_data
;
3176 unsigned long serial
= 0;
3178 if (btv
->c
.type
== 0) {
3179 /* this might be an antique... check for MMAC label in eeprom */
3180 if ((ee
[0]=='M') && (ee
[1]=='M') && (ee
[2]=='A') && (ee
[3]=='C')) {
3181 unsigned char checksum
= 0;
3182 for (i
=0; i
<21; i
++)
3184 if (checksum
!= ee
[21])
3186 btv
->c
.type
= BTTV_OSPREY1x0_848
;
3187 for (i
= 12; i
< 21; i
++)
3188 serial
*= 10, serial
+= ee
[i
] - '0';
3191 unsigned short type
;
3194 for(; offset
< 8*16; offset
+= 16) {
3195 unsigned short checksum
= 0;
3196 /* verify the checksum */
3197 for(i
= 0; i
<14; i
++) checksum
+= ee
[i
+offset
];
3198 checksum
= ~checksum
; /* no idea why */
3199 if ((((checksum
>>8)&0x0FF) == ee
[offset
+14]) &&
3200 ((checksum
& 0x0FF) == ee
[offset
+15])) {
3208 /* found a valid descriptor */
3209 type
= (ee
[offset
+4]<<8) | (ee
[offset
+5]);
3215 btv
->c
.type
= BTTV_OSPREY1x0_848
;
3218 btv
->c
.type
= BTTV_OSPREY101_848
;
3224 btv
->c
.type
= BTTV_OSPREY1x0
;
3228 btv
->c
.type
= BTTV_OSPREY1x1
;
3233 btv
->c
.type
= BTTV_OSPREY1x1_SVID
;
3239 btv
->c
.type
= BTTV_OSPREY2xx
;
3243 btv
->c
.type
= BTTV_OSPREY2x0_SVID
;
3246 btv
->c
.type
= BTTV_OSPREY500
;
3250 btv
->c
.type
= BTTV_OSPREY540
;
3251 /* bttv_osprey_540_init(btv); */
3255 btv
->c
.type
= BTTV_OSPREY2x0
;
3256 /* enable output on select control lines */
3257 gpio_inout(0xffffff,0x000303);
3260 /* unknown...leave generic, but get serial # */
3263 serial
= (ee
[offset
+6] << 24)
3264 | (ee
[offset
+7] << 16)
3265 | (ee
[offset
+8] << 8)
3269 printk(KERN_INFO
"bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3270 btv
->c
.nr
, btv
->c
.type
, bttv_tvcards
[btv
->c
.type
].name
,serial
);
3273 /* ----------------------------------------------------------------------- */
3274 /* AVermedia specific stuff, from bktr_card.c */
3276 static int tuner_0_table
[] = {
3277 TUNER_PHILIPS_NTSC
, TUNER_PHILIPS_PAL
/* PAL-BG*/,
3278 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
/* PAL-I*/,
3279 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
,
3280 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_SECAM
,
3281 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_PAL
,
3282 TUNER_PHILIPS_FM1216ME_MK3
};
3284 static int tuner_1_table
[] = {
3285 TUNER_TEMIC_NTSC
, TUNER_TEMIC_PAL
,
3286 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3287 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3288 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_4012FY5
, /* TUNER_TEMIC_SECAM */
3289 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_PAL
};
3291 static void __devinit
avermedia_eeprom(struct bttv
*btv
)
3293 int tuner_make
,tuner_tv_fm
,tuner_format
,tuner
=0;
3295 tuner_make
= (eeprom_data
[0x41] & 0x7);
3296 tuner_tv_fm
= (eeprom_data
[0x41] & 0x18) >> 3;
3297 tuner_format
= (eeprom_data
[0x42] & 0xf0) >> 4;
3298 btv
->has_remote
= (eeprom_data
[0x42] & 0x01);
3300 if (tuner_make
== 0 || tuner_make
== 2)
3301 if(tuner_format
<=0x0a)
3302 tuner
= tuner_0_table
[tuner_format
];
3303 if (tuner_make
== 1)
3304 if(tuner_format
<=9)
3305 tuner
= tuner_1_table
[tuner_format
];
3307 if (tuner_make
== 4)
3308 if(tuner_format
== 0x09)
3309 tuner
= TUNER_LG_NTSC_NEW_TAPC
; /* TAPC-G702P */
3311 printk(KERN_INFO
"bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3312 btv
->c
.nr
,eeprom_data
[0x41],eeprom_data
[0x42]);
3314 btv
->tuner_type
=tuner
;
3317 printk("Unknown type");
3318 printk(" radio:%s remote control:%s\n",
3319 tuner_tv_fm
? "yes" : "no",
3320 btv
->has_remote
? "yes" : "no");
3323 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3324 void bttv_tda9880_setnorm(struct bttv
*btv
, int norm
)
3326 /* fix up our card entry */
3327 if(norm
==VIDEO_MODE_NTSC
) {
3328 bttv_tvcards
[BTTV_VOODOOTV_FM
].audiomux
[0]=0x957fff;
3329 bttv_tvcards
[BTTV_VOODOOTV_FM
].audiomux
[4]=0x957fff;
3330 dprintk("bttv_tda9880_setnorm to NTSC\n");
3333 bttv_tvcards
[BTTV_VOODOOTV_FM
].audiomux
[0]=0x947fff;
3334 bttv_tvcards
[BTTV_VOODOOTV_FM
].audiomux
[4]=0x947fff;
3335 dprintk("bttv_tda9880_setnorm to PAL\n");
3337 /* set GPIO according */
3338 gpio_bits(bttv_tvcards
[btv
->c
.type
].gpiomask
,
3339 bttv_tvcards
[btv
->c
.type
].audiomux
[btv
->audio
]);
3344 * reset/enable the MSP on some Hauppauge cards
3345 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3350 static void __devinit
boot_msp34xx(struct bttv
*btv
, int pin
)
3352 int mask
= (1 << pin
);
3354 gpio_inout(mask
,mask
);
3357 gpio_bits(mask
,mask
);
3360 bttv_gpio_tracking(btv
,"msp34xx");
3362 printk(KERN_INFO
"bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3363 "init [%d]\n", btv
->c
.nr
, pin
);
3366 static void __devinit
boot_bt832(struct bttv
*btv
)
3370 /* ----------------------------------------------------------------------- */
3371 /* Imagenation L-Model PXC200 Framegrabber */
3372 /* This is basically the same procedure as
3373 * used by Alessandro Rubini in his pxc200
3374 * driver, but using BTTV functions */
3376 static void __devinit
init_PXC200(struct bttv
*btv
)
3378 static int vals
[] __devinitdata
= { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3379 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3385 /* Initialise GPIO-connevted stuff */
3386 gpio_inout(0xffffff, (1<<13));
3390 /* GPIO inputs are pulled up, so no need to drive
3391 * reset pin any longer */
3392 gpio_bits(0xffffff, 0);
3394 bttv_gpio_tracking(btv
,"pxc200");
3396 /* we could/should try and reset/control the AD pots? but
3397 right now we simply turned off the crushing. Without
3398 this the AGC drifts drifts
3399 remember the EN is reverse logic -->
3400 setting BT848_ADC_AGC_EN disable the AGC
3401 tboult@eecs.lehigh.edu
3404 btwrite(BT848_ADC_RESERVED
|BT848_ADC_AGC_EN
, BT848_ADC
);
3406 /* Initialise MAX517 DAC */
3407 printk(KERN_INFO
"Setting DAC reference voltage level ...\n");
3408 bttv_I2CWrite(btv
,0x5E,0,0x80,1);
3410 /* Initialise 12C508 PIC */
3411 /* The I2CWrite and I2CRead commmands are actually to the
3412 * same chips - but the R/W bit is included in the address
3413 * argument so the numbers are different */
3416 printk(KERN_INFO
"Initialising 12C508 PIC chip ...\n");
3418 /* First of all, enable the clock line. This is used in the PXC200-F */
3419 val
= btread(BT848_GPIO_DMA_CTL
);
3420 val
|= BT848_GPIO_DMA_CTL_GPCLKMODE
;
3421 btwrite(val
, BT848_GPIO_DMA_CTL
);
3423 /* Then, push to 0 the reset pin long enough to reset the *
3424 * device same as above for the reset line, but not the same
3425 * value sent to the GPIO-connected stuff
3426 * which one is the good one? */
3427 gpio_inout(0xffffff,(1<<2));
3432 for (i
= 0; i
< ARRAY_SIZE(vals
); i
++) {
3433 tmp
=bttv_I2CWrite(btv
,0x1E,0,vals
[i
],1);
3436 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3437 vals
[i
],tmp
,bttv_I2CRead(btv
,0x1F,NULL
));
3441 printk(KERN_INFO
"PXC200 Initialised.\n");
3446 /* ----------------------------------------------------------------------- */
3448 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3449 * it. This apparently involves the following procedure for each 878 chip:
3451 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3453 * 2) write to GPIO_DATA
3459 * read from GPIO_DATA into buf (uint_32)
3460 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3461 * error. ERROR_CPLD_Check_Failed stop.
3463 * 3) write to GPIO_DATA
3464 * - write 0x4400 + 0x0E
3466 * - write 0x4410 + 0x0E
3469 * read from GPIO_DATA into buf (uint_32)
3470 * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3471 * error. ERROR_CPLD_Check_Failed.
3473 /* ----------------------------------------------------------------------- */
3475 init_RTV24 (struct bttv
*btv
)
3477 uint32_t dataRead
= 0;
3478 long watchdog_value
= 0x0E;
3481 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3484 btwrite (0x00c3feff, BT848_GPIO_OUT_EN
);
3486 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
3488 btwrite (0x10 + watchdog_value
, BT848_GPIO_DATA
);
3490 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
3492 dataRead
= btread (BT848_GPIO_DATA
);
3494 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 1)) {
3496 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3497 btv
->c
.nr
, dataRead
);
3500 btwrite (0x4400 + watchdog_value
, BT848_GPIO_DATA
);
3502 btwrite (0x4410 + watchdog_value
, BT848_GPIO_DATA
);
3504 btwrite (watchdog_value
, BT848_GPIO_DATA
);
3506 dataRead
= btread (BT848_GPIO_DATA
);
3508 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 0)) {
3510 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3511 btv
->c
.nr
, dataRead
);
3517 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv
->c
.nr
);
3522 /* ----------------------------------------------------------------------- */
3523 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3525 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3526 * This code is placed under the terms of the GNU General Public License
3528 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3531 static void bus_low(struct bttv
*btv
, int bit
)
3533 if (btv
->mbox_ior
) {
3534 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3535 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3542 if (btv
->mbox_ior
) {
3543 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3548 static void bus_high(struct bttv
*btv
, int bit
)
3550 if (btv
->mbox_ior
) {
3551 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3552 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3559 if (btv
->mbox_ior
) {
3560 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3565 static int bus_in(struct bttv
*btv
, int bit
)
3567 if (btv
->mbox_ior
) {
3568 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3569 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3572 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3575 return gpio_read() & (bit
);
3578 /* TEA5757 register bits */
3579 #define TEA_FREQ 0:14
3580 #define TEA_BUFFER 15:15
3582 #define TEA_SIGNAL_STRENGTH 16:17
3584 #define TEA_PORT1 18:18
3585 #define TEA_PORT0 19:19
3587 #define TEA_BAND 20:21
3588 #define TEA_BAND_FM 0
3589 #define TEA_BAND_MW 1
3590 #define TEA_BAND_LW 2
3591 #define TEA_BAND_SW 3
3593 #define TEA_MONO 22:22
3594 #define TEA_ALLOW_STEREO 0
3595 #define TEA_FORCE_MONO 1
3597 #define TEA_SEARCH_DIRECTION 23:23
3598 #define TEA_SEARCH_DOWN 0
3599 #define TEA_SEARCH_UP 1
3601 #define TEA_STATUS 24:24
3602 #define TEA_STATUS_TUNED 0
3603 #define TEA_STATUS_SEARCHING 1
3605 /* Low-level stuff */
3606 static int tea5757_read(struct bttv
*btv
)
3608 unsigned long timeout
;
3612 /* better safe than sorry */
3613 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
);
3615 if (btv
->mbox_ior
) {
3616 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3617 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3622 bttv_gpio_tracking(btv
,"tea5757 read");
3624 bus_low(btv
,btv
->mbox_we
);
3625 bus_low(btv
,btv
->mbox_clk
);
3628 timeout
= jiffies
+ HZ
;
3630 /* wait for DATA line to go low; error if it doesn't */
3631 while (bus_in(btv
,btv
->mbox_data
) && time_before(jiffies
, timeout
))
3633 if (bus_in(btv
,btv
->mbox_data
)) {
3634 printk(KERN_WARNING
"bttv%d: tea5757: read timeout\n",btv
->c
.nr
);
3638 dprintk("bttv%d: tea5757:",btv
->c
.nr
);
3639 for(i
= 0; i
< 24; i
++)
3642 bus_high(btv
,btv
->mbox_clk
);
3644 dprintk("%c",(bus_in(btv
,btv
->mbox_most
) == 0)?'T':'-');
3645 bus_low(btv
,btv
->mbox_clk
);
3647 value
|= (bus_in(btv
,btv
->mbox_data
) == 0)?0:1; /* MSB first */
3648 dprintk("%c", (bus_in(btv
,btv
->mbox_most
) == 0)?'S':'M');
3650 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv
->c
.nr
, value
);
3654 static int tea5757_write(struct bttv
*btv
, int value
)
3659 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
| btv
->mbox_data
);
3661 if (btv
->mbox_ior
) {
3662 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3663 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3667 bttv_gpio_tracking(btv
,"tea5757 write");
3669 dprintk("bttv%d: tea5757: write 0x%X\n", btv
->c
.nr
, value
);
3670 bus_low(btv
,btv
->mbox_clk
);
3671 bus_high(btv
,btv
->mbox_we
);
3672 for(i
= 0; i
< 25; i
++)
3674 if (reg
& 0x1000000)
3675 bus_high(btv
,btv
->mbox_data
);
3677 bus_low(btv
,btv
->mbox_data
);
3679 bus_high(btv
,btv
->mbox_clk
);
3681 bus_low(btv
,btv
->mbox_clk
);
3684 bus_low(btv
,btv
->mbox_we
); /* unmute !!! */
3688 void tea5757_set_freq(struct bttv
*btv
, unsigned short freq
)
3690 dprintk("tea5757_set_freq %d\n",freq
);
3691 tea5757_write(btv
, 5 * freq
+ 0x358); /* add 10.7MHz (see docs) */
3695 /* ----------------------------------------------------------------------- */
3698 void winview_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3700 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
3701 int bits_out
, loops
, vol
, data
;
3704 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
3705 v
->flags
|= VIDEO_AUDIO_VOLUME
;
3709 /* 32 levels logarithmic */
3710 vol
= 32 - ((v
->volume
>>11));
3712 bits_out
= (PT2254_DBS_IN_2
>>(vol
%5));
3714 bits_out
|= (PT2254_DBS_IN_10
>>(vol
/5));
3715 bits_out
|= PT2254_L_CHANNEL
| PT2254_R_CHANNEL
;
3717 data
&= ~(WINVIEW_PT2254_CLK
| WINVIEW_PT2254_DATA
|
3718 WINVIEW_PT2254_STROBE
);
3719 for (loops
= 17; loops
>= 0 ; loops
--) {
3720 if (bits_out
& (1<<loops
))
3721 data
|= WINVIEW_PT2254_DATA
;
3723 data
&= ~WINVIEW_PT2254_DATA
;
3726 data
|= WINVIEW_PT2254_CLK
;
3729 data
&= ~WINVIEW_PT2254_CLK
;
3732 data
|= WINVIEW_PT2254_STROBE
;
3733 data
&= ~WINVIEW_PT2254_DATA
;
3736 data
&= ~WINVIEW_PT2254_STROBE
;
3740 /* ----------------------------------------------------------------------- */
3741 /* mono/stereo control for various cards (which don't use i2c chips but */
3742 /* connect something to the GPIO pins */
3745 gvbctv3pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3747 unsigned int con
= 0;
3750 gpio_inout(0x300, 0x300);
3751 if (v
->mode
& VIDEO_SOUND_LANG1
)
3753 if (v
->mode
& VIDEO_SOUND_LANG2
)
3755 if (v
->mode
& VIDEO_SOUND_STEREO
)
3757 /* if (v->mode & VIDEO_SOUND_MONO)
3759 gpio_bits(0x300, con
);
3761 v
->mode
= VIDEO_SOUND_STEREO
|
3762 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3767 gvbctv5pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3769 unsigned int val
, con
;
3771 if (btv
->radio_user
)
3777 if (v
->mode
& VIDEO_SOUND_LANG2
) {
3778 if (v
->mode
& VIDEO_SOUND_LANG1
) {
3787 if (con
!= (val
& 0x300)) {
3788 gpio_bits(0x300, con
);
3790 bttv_gpio_tracking(btv
,"gvbctv5pci");
3793 switch (val
& 0x70) {
3795 v
->mode
= VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3798 v
->mode
= VIDEO_SOUND_LANG2
;
3801 v
->mode
= VIDEO_SOUND_LANG1
;
3804 v
->mode
= VIDEO_SOUND_STEREO
;
3807 v
->mode
= VIDEO_SOUND_MONO
;
3810 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3811 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3817 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
3818 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
3819 * 0xdde enables mono and 0xccd enables sap
3821 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
3822 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
3823 * input/output sound connection, so both must be set for output mode.
3825 * Looks like it's needed only for the "tvphone", the "tvphone 98"
3826 * handles this with a tda9840
3830 avermedia_tvphone_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3835 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
3837 if (v
->mode
& VIDEO_SOUND_STEREO
)
3840 gpio_bits(0x03,val
);
3842 bttv_gpio_tracking(btv
,"avermedia");
3845 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3852 avermedia_tv_stereo_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3857 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
3859 if (v
->mode
& VIDEO_SOUND_STEREO
) /* STEREO */
3861 btaor(val
, ~0x03, BT848_GPIO_DATA
);
3863 bttv_gpio_tracking(btv
,"avermedia");
3865 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3866 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3871 /* Lifetec 9415 handling */
3873 lt9415_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3877 if (gpio_read() & 0x4000) {
3878 v
->mode
= VIDEO_SOUND_MONO
;
3883 if (v
->mode
& VIDEO_SOUND_LANG2
) /* A2 SAP */
3885 if (v
->mode
& VIDEO_SOUND_STEREO
) /* A2 stereo */
3887 if ((v
->mode
& VIDEO_SOUND_LANG1
) ||
3888 (v
->mode
& VIDEO_SOUND_MONO
))
3890 gpio_bits(0x0880, val
);
3892 bttv_gpio_tracking(btv
,"lt9415");
3894 /* autodetect doesn't work with this card :-( */
3895 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3896 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3901 /* TDA9821 on TerraTV+ Bt848, Bt878 */
3903 terratv_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3905 unsigned int con
= 0;
3908 gpio_inout(0x180000,0x180000);
3909 if (v
->mode
& VIDEO_SOUND_LANG2
)
3911 if (v
->mode
& VIDEO_SOUND_STEREO
)
3913 gpio_bits(0x180000, con
);
3915 bttv_gpio_tracking(btv
,"terratv");
3917 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3918 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3923 winfast2000_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3925 unsigned long val
= 0;
3928 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
3929 if (v
->mode
& VIDEO_SOUND_MONO
) /* Mono */
3931 if (v
->mode
& VIDEO_SOUND_LANG1
) /* Mono */
3933 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
3935 if (v
->mode
& VIDEO_SOUND_STEREO
) /* Stereo */
3938 gpio_bits(0x430000, val
);
3940 bttv_gpio_tracking(btv
,"winfast2000");
3943 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3944 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3949 * Dariusz Kowalewski <darekk@automex.pl>
3950 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
3951 * revision 9B has on-board TDA9874A sound decoder).
3953 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
3954 * will mute this cards.
3957 pvbt878p9b_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3959 unsigned int val
= 0;
3961 if (btv
->radio_user
)
3965 if (v
->mode
& VIDEO_SOUND_MONO
) {
3968 if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
3969 || (v
->mode
& VIDEO_SOUND_STEREO
)) {
3973 gpio_bits(0x03,val
);
3975 bttv_gpio_tracking(btv
,"pvbt878p9b");
3978 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3979 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3984 * Dariusz Kowalewski <darekk@automex.pl>
3985 * sound control for FlyVideo 2000S (with tda9874 decoder)
3986 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
3989 fv2000s_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3991 unsigned int val
= 0xffff;
3993 if (btv
->radio_user
)
3996 if (v
->mode
& VIDEO_SOUND_MONO
) {
3999 if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
4000 || (v
->mode
& VIDEO_SOUND_STEREO
)) {
4001 val
= 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4003 if (val
!= 0xffff) {
4004 gpio_bits(0x1800, val
);
4006 bttv_gpio_tracking(btv
,"fv2000s");
4009 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4010 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4015 * sound control for Canopus WinDVR PCI
4016 * Masaki Suzuki <masaki@btree.org>
4019 windvr_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4021 unsigned long val
= 0;
4024 if (v
->mode
& VIDEO_SOUND_MONO
)
4026 if (v
->mode
& VIDEO_SOUND_LANG1
)
4028 if (v
->mode
& VIDEO_SOUND_LANG2
)
4030 if (v
->mode
& VIDEO_SOUND_STEREO
)
4033 gpio_bits(0x140000, val
);
4035 bttv_gpio_tracking(btv
,"windvr");
4038 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4039 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4044 * sound control for AD-TVK503
4045 * Hiroshi Takekawa <sian@big.or.jp>
4048 adtvk503_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4050 unsigned int con
= 0xffffff;
4052 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4055 /* btor(***, BT848_GPIO_OUT_EN); */
4056 if (v
->mode
& VIDEO_SOUND_LANG1
)
4058 if (v
->mode
& VIDEO_SOUND_LANG2
)
4060 if (v
->mode
& VIDEO_SOUND_STEREO
)
4062 if (v
->mode
& VIDEO_SOUND_MONO
)
4064 if (con
!= 0xffffff) {
4065 gpio_bits(0x1e0000,con
);
4067 bttv_gpio_tracking(btv
, "adtvk503");
4070 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4071 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4075 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4077 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4078 * switch instead (CD22M3494E). This IC can have multiple active connections
4079 * between Xn (input) and Yn (output) pins. We need to clear any existing
4080 * connection prior to establish a new one, pulsing the STROBE pin.
4082 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4083 * GPIO pins are wired as:
4084 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4085 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4086 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4087 * GPIO[8] - - P3[5] (microcontroler)
4088 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4089 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4090 * GPINTR - - P3[4] (microcontroler)
4092 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4093 * configuration either directly (as we are doing) or using the microcontroler
4094 * which is also wired to I2C interface. I have no further info on the
4095 * microcontroler features, one would need to disassembly the firmware.
4096 * note: the vendor refused to give any information on this product, all
4097 * that stuff was found using a multimeter! :)
4099 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
)
4101 /* reset all conections */
4102 gpio_bits(0x200,0x200);
4104 gpio_bits(0x200,0x000);
4107 /* create a new conection */
4108 gpio_bits(0x480,0x080);
4109 gpio_bits(0x480,0x480);
4111 gpio_bits(0x480,0x080);
4115 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4117 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4118 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4119 * chips, ten eight input analog multiplexors, a not chip and a few
4122 * 16 inputs on a secondary bracket are provided and can be selected
4123 * from each of the four capture chips. Two of the eight input
4124 * multiplexors are used to select from any of the 16 input signals.
4126 * Unsupported hardware capabilities:
4127 * . A video output monitor on the secondary bracket can be selected from
4128 * one of the 878A chips.
4129 * . Another passthrough but I haven't spent any time investigating it.
4130 * . Digital I/O (logic level connected to GPIO) is available from an
4133 * The on chip input mux should always be set to 2.
4134 * GPIO[16:19] - Video input selection
4135 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4136 * GPIO[?:?] - Digital I/O.
4138 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4139 * determined what function (if any) it provides. With the microcontroller
4140 * and sync seperator chips a guess is that it might have to do with video
4141 * switching and maybe some digital I/O.
4143 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
)
4146 gpio_bits(0x0f0000, input
<< 16);
4149 static void tibetCS16_init(struct bttv
*btv
)
4151 /* enable gpio bits, mask obtained via btSpy */
4152 gpio_inout(0xffffff, 0x0f7fff);
4153 gpio_write(0x0f7fff);
4157 * The following routines for the Kodicom-4400r get a little mind-twisting.
4158 * There is a "master" controller and three "slave" controllers, together
4159 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4160 * The analog switch is controlled by the "master", but the detection order
4161 * of the four BT878A chips is in an order which I just don't understand.
4162 * The "master" is actually the second controller to be detected. The
4163 * logic on the board uses logical numbers for the 4 controlers, but
4164 * those numbers are different from the detection sequence. When working
4165 * with the analog switch, we need to "map" from the detection sequence
4166 * over to the board's logical controller number. This mapping sequence
4167 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4168 * unit 3, the second (which is the master) is logical unit 0, etc.
4169 * We need to maintain the status of the analog switch (which of the 16
4170 * cameras is connected to which of the 4 controllers). Rather than
4171 * add to the bttv structure for this, we use the data reserved for
4172 * the mbox (unused for this card type).
4176 * First a routine to set the analog switch, which controls which camera
4177 * is routed to which controller. The switch comprises an X-address
4178 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4179 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4180 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4181 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4182 * specified address. The idea is to set the address and data, then bring
4183 * STROBE high, and finally bring STROBE back to low.
4185 static void kodicom4400r_write(struct bttv
*btv
,
4186 unsigned char xaddr
,
4187 unsigned char yaddr
,
4188 unsigned char data
) {
4191 udata
= (data
<< 7) | ((yaddr
&3) << 4) | (xaddr
&0xf);
4192 gpio_bits(0x1ff, udata
); /* write ADDR and DAT */
4193 gpio_bits(0x1ff, udata
| (1 << 8)); /* strobe high */
4194 gpio_bits(0x1ff, udata
); /* strobe low */
4198 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4199 * use this routine. The routine finds the "master" for the card, maps
4200 * the controller number from the detected position over to the logical
4201 * number, writes the appropriate data to the analog switch, and housekeeps
4202 * the local copy of the switch information. The parameter 'input' is the
4203 * requested camera number (0 - 15).
4205 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
)
4210 static unsigned char map
[4] = {3, 0, 2, 1};
4212 mctlr
= master
[btv
->c
.nr
];
4213 if (mctlr
== NULL
) { /* ignore if master not yet detected */
4216 yaddr
= (btv
->c
.nr
- mctlr
->c
.nr
+ 1) & 3; /* the '&' is for safety */
4218 sw_status
= (char *)(&mctlr
->mbox_we
);
4219 xaddr
= input
& 0xf;
4220 /* Check if the controller/camera pair has changed, else ignore */
4221 if (sw_status
[yaddr
] != xaddr
)
4223 /* "open" the old switch, "close" the new one, save the new */
4224 kodicom4400r_write(mctlr
, sw_status
[yaddr
], yaddr
, 0);
4225 sw_status
[yaddr
] = xaddr
;
4226 kodicom4400r_write(mctlr
, xaddr
, yaddr
, 1);
4231 * During initialisation, we need to reset the analog switch. We
4232 * also preset the switch to map the 4 connectors on the card to the
4233 * *user's* (see above description of kodicom4400r_muxsel) channels
4236 static void kodicom4400r_init(struct bttv
*btv
)
4238 char *sw_status
= (char *)(&btv
->mbox_we
);
4241 gpio_inout(0x0003ff, 0x0003ff);
4242 gpio_write(1 << 9); /* reset MUX */
4244 /* Preset camera 0 to the 4 controllers */
4245 for (ix
=0; ix
<4; ix
++) {
4247 kodicom4400r_write(btv
, ix
, ix
, 1);
4250 * Since this is the "master", we need to set up the
4251 * other three controller chips' pointers to this structure
4252 * for later use in the muxsel routine.
4254 if ((btv
->c
.nr
<1) || (btv
->c
.nr
>BTTV_MAX
-3))
4256 master
[btv
->c
.nr
-1] = btv
;
4257 master
[btv
->c
.nr
] = btv
;
4258 master
[btv
->c
.nr
+1] = btv
;
4259 master
[btv
->c
.nr
+2] = btv
;
4262 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4263 * video multiplexers to provide up to 16 video inputs. These
4264 * multiplexers are controlled by the lower 8 GPIO pins of the
4265 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4267 * xxx0 is pin xxx of multiplexer U5,
4268 * yyy1 is pin yyy of multiplexer U2
4280 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
)
4282 static const int masks
[] = {
4283 ENB0
, ENB0
|IN00
, ENB0
|IN10
, ENB0
|IN00
|IN10
,
4284 ENA0
, ENA0
|IN00
, ENA0
|IN10
, ENA0
|IN00
|IN10
,
4285 ENB1
, ENB1
|IN01
, ENB1
|IN11
, ENB1
|IN01
|IN11
,
4286 ENA1
, ENA1
|IN01
, ENA1
|IN11
, ENA1
|IN01
|IN11
,
4288 gpio_write(masks
[input
%16]);
4290 static void picolo_tetra_init(struct bttv
*btv
)
4292 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4293 btwrite (0x08<<16,BT848_GPIO_DATA
);/*GPIO[19] [==> 4053 B+C] set to 1 */
4294 btwrite (0x04<<16,BT848_GPIO_DATA
);/*GPIO[18] [==> 4053 A] set to 1*/
4296 static void picolo_tetra_muxsel (struct bttv
* btv
, unsigned int input
)
4299 dprintk (KERN_DEBUG
"bttv%d : picolo_tetra_muxsel => input = %d\n",btv
->c
.nr
,input
);
4300 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4301 /*GPIO[20]&GPIO[21] used to choose the right input*/
4302 btwrite (input
<<20,BT848_GPIO_DATA
);
4307 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4309 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4310 * swichers to provide 16 channels to MUX0. The TDA8540's have
4311 * 4 indepedant outputs and as such the IVC120G also has the
4312 * optional "Monitor Out" bus. This allows the card to be looking
4313 * at one input while the monitor is looking at another.
4315 * Since I've couldn't be bothered figuring out how to add an
4316 * independant muxsel for the monitor bus, I've just set it to
4317 * whatever the card is looking at.
4319 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4320 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4322 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4323 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4324 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4325 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4329 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4330 #define I2C_TDA8540 0x90
4331 #define I2C_TDA8540_ALT1 0x92
4332 #define I2C_TDA8540_ALT2 0x94
4333 #define I2C_TDA8540_ALT3 0x96
4334 #define I2C_TDA8540_ALT4 0x98
4335 #define I2C_TDA8540_ALT5 0x9a
4336 #define I2C_TDA8540_ALT6 0x9c
4338 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
)
4341 int key
= input
% 4;
4342 int matrix
= input
/ 4;
4344 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4345 btv
->c
.nr
, input
, matrix
, key
);
4347 /* Handles the input selection on the TDA8540's */
4348 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x00,
4349 ((matrix
== 3) ? (key
| key
<< 2) : 0x00), 1);
4350 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x00,
4351 ((matrix
== 0) ? (key
| key
<< 2) : 0x00), 1);
4352 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x00,
4353 ((matrix
== 1) ? (key
| key
<< 2) : 0x00), 1);
4354 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x00,
4355 ((matrix
== 2) ? (key
| key
<< 2) : 0x00), 1);
4357 /* Handles the output enables on the TDA8540's */
4358 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x02,
4359 ((matrix
== 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4360 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x02,
4361 ((matrix
== 0) ? 0x03 : 0x00), 1); /* 1-4 */
4362 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x02,
4363 ((matrix
== 1) ? 0x03 : 0x00), 1); /* 5-8 */
4364 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x02,
4365 ((matrix
== 2) ? 0x03 : 0x00), 1); /* 9-12 */
4367 /* Selects MUX0 for input on the 878 */
4368 btaor((0)<<5, ~(3<<5), BT848_IFORM
);
4372 /* PXC200 muxsel helper
4373 * luke@syseng.anu.edu.au
4374 * another transplant
4375 * from Alessandro Rubini (rubini@linux.it)
4377 * There are 4 kinds of cards:
4378 * PXC200L which is bt848
4379 * PXC200F which is bt848 with PIC controlling mux
4380 * PXC200AL which is bt878
4381 * PXC200AF which is bt878 with PIC controlling mux
4383 #define PX_CFG_PXC200F 0x01
4384 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4385 #define PX_I2C_PIC 0x0f
4386 #define PX_PXC200A_CARDID 0x200a1295
4387 #define PX_I2C_CMD_CFG 0x00
4389 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
)
4394 unsigned char buf
[2];
4396 /* Read PIC config to determine if this is a PXC200F */
4400 rc
=bttv_I2CWrite(btv
,(PX_I2C_PIC
<<1),buf
[0],buf
[1],1);
4402 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv
->c
.nr
,rc
);
4403 /* not PXC ? do nothing */
4407 rc
=bttv_I2CRead(btv
,(PX_I2C_PIC
<<1),NULL
);
4408 if (!(rc
& PX_CFG_PXC200F
)) {
4409 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv
->c
.nr
,rc
);
4414 /* The multiplexer in the 200F is handled by the GPIO port */
4415 /* get correct mapping between inputs */
4416 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4417 /* ** not needed!? */
4420 /* make sure output pins are enabled */
4421 /* bitmask=0x30f; */
4423 /* check whether we have a PXC200A */
4424 if (btv
->cardid
== PX_PXC200A_CARDID
) {
4425 bitmask
^= 0x180; /* use 7 and 9, not 8 and 9 */
4426 bitmask
|= 7<<4; /* the DAC */
4428 btwrite(bitmask
, BT848_GPIO_OUT_EN
);
4430 bitmask
= btread(BT848_GPIO_DATA
);
4431 if (btv
->cardid
== PX_PXC200A_CARDID
)
4432 bitmask
= (bitmask
& ~0x280) | ((mux
& 2) << 8) | ((mux
& 1) << 7);
4433 else /* older device */
4434 bitmask
= (bitmask
& ~0x300) | ((mux
& 3) << 8);
4435 btwrite(bitmask
,BT848_GPIO_DATA
);
4438 * Was "to be safe, set the bt848 to input 0"
4439 * Actually, since it's ok at load time, better not messing
4440 * with these bits (on PXC200AF you need to set mux 2 here)
4442 * needed because bttv-driver sets mux before calling this function
4444 if (btv
->cardid
== PX_PXC200A_CARDID
)
4445 btaor(2<<5, ~BT848_IFORM_MUXSEL
, BT848_IFORM
);
4446 else /* older device */
4447 btand(~BT848_IFORM_MUXSEL
,BT848_IFORM
);
4449 printk(KERN_DEBUG
"bttv%d: setting input channel to:%d\n", btv
->c
.nr
,(int)mux
);
4452 /* ----------------------------------------------------------------------- */
4453 /* motherboard chipset specific stuff */
4455 void __devinit
bttv_check_chipset(void)
4457 int pcipci_fail
= 0;
4458 struct pci_dev
*dev
= NULL
;
4460 if (pci_pci_problems
& PCIPCI_FAIL
)
4462 if (pci_pci_problems
& (PCIPCI_TRITON
|PCIPCI_NATOMA
|PCIPCI_VIAETBF
))
4464 if (pci_pci_problems
& PCIPCI_VSFX
)
4466 #ifdef PCIPCI_ALIMAGIK
4467 if (pci_pci_problems
& PCIPCI_ALIMAGIK
)
4472 /* print warnings about any quirks found */
4474 printk(KERN_INFO
"bttv: Host bridge needs ETBF enabled.\n");
4476 printk(KERN_INFO
"bttv: Host bridge needs VSFX enabled.\n");
4478 printk(KERN_WARNING
"bttv: BT848 and your chipset may not work together.\n");
4480 printk(KERN_WARNING
"bttv: overlay will be disabled.\n");
4483 printk(KERN_WARNING
"bttv: overlay forced. Use this option at your own risk.\n");
4486 if (UNSET
!= latency
)
4487 printk(KERN_INFO
"bttv: pci latency fixup [%d]\n",latency
);
4489 while ((dev
= pci_find_device(PCI_VENDOR_ID_INTEL
,
4490 PCI_DEVICE_ID_INTEL_82441
, dev
))) {
4492 pci_read_config_byte(dev
, 0x53, &b
);
4494 printk(KERN_INFO
"bttv: Host bridge: 82441FX Natoma, "
4495 "bufcon=0x%02x\n",b
);
4499 int __devinit
bttv_handle_chipset(struct bttv
*btv
)
4501 unsigned char command
;
4503 if (!triton1
&& !vsfx
&& UNSET
== latency
)
4508 printk(KERN_INFO
"bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv
->c
.nr
);
4509 if (vsfx
&& btv
->id
>= 878)
4510 printk(KERN_INFO
"bttv%d: enabling VSFX\n",btv
->c
.nr
);
4511 if (UNSET
!= latency
)
4512 printk(KERN_INFO
"bttv%d: setting pci timer to %d\n",
4516 if (btv
->id
< 878) {
4517 /* bt848 (mis)uses a bit in the irq mask for etbf */
4519 btv
->triton1
= BT848_INT_ETBF
;
4521 /* bt878 has a bit in the pci config space for it */
4522 pci_read_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, &command
);
4524 command
|= BT878_EN_TBFX
;
4526 command
|= BT878_EN_VSFX
;
4527 pci_write_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, command
);
4529 if (UNSET
!= latency
)
4530 pci_write_config_byte(btv
->c
.pci
, PCI_LATENCY_TIMER
, latency
);