arch/arm/mach-pxa/cpu-pxa.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/cpu-pxa.c
   3  *
   4  *  Copyright (C) 2002,2003 Intrinsyc Software
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  *
  20  * History:
  21  *   31-Jul-2002 : Initial version [FB]
  22  *   29-Jan-2003 : added PXA255 support [FB]
  23  *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
  24  *
  25  * Note:
  26  *   This driver may change the memory bus clock rate, but will not do any
  27  *   platform specific access timing changes... for example if you have flash
  28  *   memory connected to CS0, you will need to register a platform specific
  29  *   notifier which will adjust the memory access strobes to maintain a
  30  *   minimum strobe width.
  31  *
  32  */
  33
  34 #include <linux/kernel.h>
  35 #include <linux/module.h>
  36 #include <linux/sched.h>
  37 #include <linux/init.h>
  38 #include <linux/cpufreq.h>
  39
  40 #include <asm/hardware.h>
  41 #include <asm/arch/pxa-regs.h>
  42 #include <asm/arch/pxa2xx-regs.h>
  43
  44 #ifdef DEBUG
  45 static unsigned int freq_debug;
  46 module_param(freq_debug, uint, 0);
  47 MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
  48 #else
  49 #define freq_debug  0
  50 #endif
  51
  52 static unsigned int pxa27x_maxfreq;
  53 module_param(pxa27x_maxfreq, uint, 0);
  54 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
  55                  "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
  56
  57 typedef struct {
  58         unsigned int khz;
  59         unsigned int membus;
  60         unsigned int cccr;
  61         unsigned int div2;
  62         unsigned int cclkcfg;
  63 } pxa_freqs_t;
  64
  65 /* Define the refresh period in mSec for the SDRAM and the number of rows */
  66 #define SDRAM_TREF      64      /* standard 64ms SDRAM */
  67 #define SDRAM_ROWS      4096    /* 64MB=8192 32MB=4096 */
  68
  69 #define CCLKCFG_TURBO           0x1
  70 #define CCLKCFG_FCS             0x2
  71 #define CCLKCFG_HALFTURBO       0x4
  72 #define CCLKCFG_FASTBUS         0x8
  73 #define MDREFR_DB2_MASK         (MDREFR_K2DB2 | MDREFR_K1DB2)
  74 #define MDREFR_DRI_MASK         0xFFF
  75
  76 /*
  77  * PXA255 definitions
  78  */
  79 /* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
  80 #define CCLKCFG                 CCLKCFG_TURBO | CCLKCFG_FCS
  81
  82 static pxa_freqs_t pxa255_run_freqs[] =
  83 {
  84         /* CPU   MEMBUS  CCCR  DIV2 CCLKCFG        run  turbo PXbus SDRAM */
  85         { 99500,  99500, 0x121, 1,  CCLKCFG},   /*  99,   99,   50,   50  */
  86         {132700, 132700, 0x123, 1,  CCLKCFG},   /* 133,  133,   66,   66  */
  87         {199100,  99500, 0x141, 0,  CCLKCFG},   /* 199,  199,   99,   99  */
  88         {265400, 132700, 0x143, 1,  CCLKCFG},   /* 265,  265,  133,   66  */
  89         {331800, 165900, 0x145, 1,  CCLKCFG},   /* 331,  331,  166,   83  */
  90         {398100,  99500, 0x161, 0,  CCLKCFG},   /* 398,  398,  196,   99  */
  91 };
  92
  93 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
  94 static pxa_freqs_t pxa255_turbo_freqs[] =
  95 {
  96         /* CPU   MEMBUS  CCCR  DIV2 CCLKCFG        run  turbo PXbus SDRAM */
  97         { 99500, 99500,  0x121, 1,  CCLKCFG},   /*  99,   99,   50,   50  */
  98         {199100, 99500,  0x221, 0,  CCLKCFG},   /*  99,  199,   50,   99  */
  99         {298500, 99500,  0x321, 0,  CCLKCFG},   /*  99,  287,   50,   99  */
 100         {298600, 99500,  0x1c1, 0,  CCLKCFG},   /* 199,  287,   99,   99  */
 101         {398100, 99500,  0x241, 0,  CCLKCFG},   /* 199,  398,   99,   99  */
 102 };
 103
 104 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
 105 #define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
 106
 107 static struct cpufreq_frequency_table
 108         pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
 109 static struct cpufreq_frequency_table
 110         pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
 111
 112 /*
 113  * PXA270 definitions
 114  *
 115  * For the PXA27x:
 116  * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
 117  *
 118  * A = 0 => memory controller clock from table 3-7,
 119  * A = 1 => memory controller clock = system bus clock
 120  * Run mode frequency   = 13 MHz * L
 121  * Turbo mode frequency = 13 MHz * L * N
 122  * System bus frequency = 13 MHz * L / (B + 1)
 123  *
 124  * In CCCR:
 125  * A = 1
 126  * L = 16         oscillator to run mode ratio
 127  * 2N = 6         2 * (turbo mode to run mode ratio)
 128  *
 129  * In CCLKCFG:
 130  * B = 1          Fast bus mode
 131  * HT = 0         Half-Turbo mode
 132  * T = 1          Turbo mode
 133  *
 134  * For now, just support some of the combinations in table 3-7 of
 135  * PXA27x Processor Family Developer's Manual to simplify frequency
 136  * change sequences.
 137  */
 138 #define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
 139 #define CCLKCFG2(B, HT, T) \
 140   (CCLKCFG_FCS | \
 141    ((B)  ? CCLKCFG_FASTBUS : 0) | \
 142    ((HT) ? CCLKCFG_HALFTURBO : 0) | \
 143    ((T)  ? CCLKCFG_TURBO : 0))
 144
 145 static pxa_freqs_t pxa27x_freqs[] = {
 146         {104000, 104000, PXA27x_CCCR(1,  8, 2), 0, CCLKCFG2(1, 0, 1)},
 147         {156000, 104000, PXA27x_CCCR(1,  8, 6), 0, CCLKCFG2(1, 1, 1)},
 148         {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
 149         {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
 150         {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
 151         {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
 152         {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
 153 };
 154
 155 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
 156 static struct cpufreq_frequency_table
 157         pxa27x_freq_table[NUM_PXA27x_FREQS+1];
 158
 159 extern unsigned get_clk_frequency_khz(int info);
 160
 161 static void find_freq_tables(struct cpufreq_policy *policy,
 162                              struct cpufreq_frequency_table **freq_table,
 163                              pxa_freqs_t **pxa_freqs)
 164 {
 165         if (cpu_is_pxa25x()) {
 166                 if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
 167                         *pxa_freqs = pxa255_run_freqs;
 168                         *freq_table = pxa255_run_freq_table;
 169                 } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
 170                         *pxa_freqs = pxa255_turbo_freqs;
 171                         *freq_table = pxa255_turbo_freq_table;
 172                 } else {
 173                         printk("CPU PXA: Unknown policy found. "
 174                                "Using CPUFREQ_POLICY_PERFORMANCE\n");
 175                         *pxa_freqs = pxa255_run_freqs;
 176                         *freq_table = pxa255_run_freq_table;
 177                 }
 178         }
 179         if (cpu_is_pxa27x()) {
 180                 *pxa_freqs = pxa27x_freqs;
 181                 *freq_table = pxa27x_freq_table;
 182         }
 183 }
 184
 185 static void pxa27x_guess_max_freq(void)
 186 {
 187         if (!pxa27x_maxfreq) {
 188                 pxa27x_maxfreq = 416000;
 189                 printk(KERN_INFO "PXA CPU 27x max frequency not defined "
 190                        "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
 191                        pxa27x_maxfreq);
 192         } else {
 193                 pxa27x_maxfreq *= 1000;
 194         }
 195 }
 196
 197 static u32 mdrefr_dri(unsigned int freq)
 198 {
 199         u32 dri = 0;
 200
 201         if (cpu_is_pxa25x())
 202                 dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
 203         if (cpu_is_pxa27x())
 204                 dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
 205         return dri;
 206 }
 207
 208 /* find a valid frequency point */
 209 static int pxa_verify_policy(struct cpufreq_policy *policy)
 210 {
 211         struct cpufreq_frequency_table *pxa_freqs_table;
 212         pxa_freqs_t *pxa_freqs;
 213         int ret;
 214
 215         find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
 216         ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
 217
 218         if (freq_debug)
 219                 pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
 220                          policy->min, policy->max);
 221
 222         return ret;
 223 }
 224
 225 static unsigned int pxa_cpufreq_get(unsigned int cpu)
 226 {
 227         return get_clk_frequency_khz(0);
 228 }
 229
 230 static int pxa_set_target(struct cpufreq_policy *policy,
 231                           unsigned int target_freq,
 232                           unsigned int relation)
 233 {
 234         struct cpufreq_frequency_table *pxa_freqs_table;
 235         pxa_freqs_t *pxa_freq_settings;
 236         struct cpufreq_freqs freqs;
 237         unsigned int idx;
 238         unsigned long flags;
 239         unsigned int new_freq_cpu, new_freq_mem;
 240         unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
 241
 242         /* Get the current policy */
 243         find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
 244
 245         /* Lookup the next frequency */
 246         if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
 247                                            target_freq, relation, &idx)) {
 248                 return -EINVAL;
 249         }
 250
 251         new_freq_cpu = pxa_freq_settings[idx].khz;
 252         new_freq_mem = pxa_freq_settings[idx].membus;
 253         freqs.old = policy->cur;
 254         freqs.new = new_freq_cpu;
 255         freqs.cpu = policy->cpu;
 256
 257         if (freq_debug)
 258                 pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
 259                          "(SDRAM %d Mhz)\n",
 260                          freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 261                          (new_freq_mem / 2000) : (new_freq_mem / 1000));
 262
 263         /*
 264          * Tell everyone what we're about to do...
 265          * you should add a notify client with any platform specific
 266          * Vcc changing capability
 267          */
 268         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 269
 270         /* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
 271          * we need to preset the smaller DRI before the change.  If we're
 272          * speeding up we need to set the larger DRI value after the change.
 273          */
 274         preset_mdrefr = postset_mdrefr = MDREFR;
 275         if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
 276                 preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
 277                 preset_mdrefr |= mdrefr_dri(new_freq_mem);
 278         }
 279         postset_mdrefr =
 280                 (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
 281
 282         /* If we're dividing the memory clock by two for the SDRAM clock, this
 283          * must be set prior to the change.  Clearing the divide must be done
 284          * after the change.
 285          */
 286         if (pxa_freq_settings[idx].div2) {
 287                 preset_mdrefr  |= MDREFR_DB2_MASK;
 288                 postset_mdrefr |= MDREFR_DB2_MASK;
 289         } else {
 290                 postset_mdrefr &= ~MDREFR_DB2_MASK;
 291         }
 292
 293         local_irq_save(flags);
 294
 295         /* Set new the CCCR and prepare CCLKCFG */
 296         CCCR = pxa_freq_settings[idx].cccr;
 297         cclkcfg = pxa_freq_settings[idx].cclkcfg;
 298
 299         asm volatile("                                                  \n\
 300                 ldr     r4, [%1]                /* load MDREFR */       \n\
 301                 b       2f                                              \n\
 302                 .align  5                                               \n\
 303 1:                                                                      \n\
 304                 str     %3, [%1]                /* preset the MDREFR */ \n\
 305                 mcr     p14, 0, %2, c6, c0, 0   /* set CCLKCFG[FCS] */  \n\
 306                 str     %4, [%1]                /* postset the MDREFR */ \n\
 307                                                                         \n\
 308                 b       3f                                              \n\
 309 2:              b       1b                                              \n\
 310 3:              nop                                                     \n\
 311           "
 312                      : "=&r" (unused)
 313                      : "r" (&MDREFR), "r" (cclkcfg),
 314                        "r" (preset_mdrefr), "r" (postset_mdrefr)
 315                      : "r4", "r5");
 316         local_irq_restore(flags);
 317
 318         /*
 319          * Tell everyone what we've just done...
 320          * you should add a notify client with any platform specific
 321          * SDRAM refresh timer adjustments
 322          */
 323         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 324
 325         return 0;
 326 }
 327
 328 static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 329 {
 330         int i;
 331         unsigned int freq;
 332
 333         /* try to guess pxa27x cpu */
 334         if (cpu_is_pxa27x())
 335                 pxa27x_guess_max_freq();
 336
 337         /* set default policy and cpuinfo */
 338         policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 339         if (cpu_is_pxa25x())
 340                 policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 341         policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
 342         policy->cur = get_clk_frequency_khz(0);    /* current freq */
 343         policy->min = policy->max = policy->cur;
 344
 345         /* Generate pxa25x the run cpufreq_frequency_table struct */
 346         for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
 347                 pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
 348                 pxa255_run_freq_table[i].index = i;
 349         }
 350         pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
 351
 352         /* Generate pxa25x the turbo cpufreq_frequency_table struct */
 353         for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
 354                 pxa255_turbo_freq_table[i].frequency =
 355                         pxa255_turbo_freqs[i].khz;
 356                 pxa255_turbo_freq_table[i].index = i;
 357         }
 358         pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
 359
 360         /* Generate the pxa27x cpufreq_frequency_table struct */
 361         for (i = 0; i < NUM_PXA27x_FREQS; i++) {
 362                 freq = pxa27x_freqs[i].khz;
 363                 if (freq > pxa27x_maxfreq)
 364                         break;
 365                 pxa27x_freq_table[i].frequency = freq;
 366                 pxa27x_freq_table[i].index = i;
 367         }
 368         pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
 369
 370         /*
 371          * Set the policy's minimum and maximum frequencies from the tables
 372          * just constructed.  This sets cpuinfo.mxx_freq, min and max.
 373          */
 374         if (cpu_is_pxa25x())
 375                 cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
 376         else if (cpu_is_pxa27x())
 377                 cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
 378
 379         printk(KERN_INFO "PXA CPU frequency change support initialized\n");
 380
 381         return 0;
 382 }
 383
 384 static struct cpufreq_driver pxa_cpufreq_driver = {
 385         .verify = pxa_verify_policy,
 386         .target = pxa_set_target,
 387         .init   = pxa_cpufreq_init,
 388         .get    = pxa_cpufreq_get,
 389         .name   = "PXA2xx",
 390 };
 391
 392 static int __init pxa_cpu_init(void)
 393 {
 394         int ret = -ENODEV;
 395         if (cpu_is_pxa25x() || cpu_is_pxa27x())
 396                 ret = cpufreq_register_driver(&pxa_cpufreq_driver);
 397         return ret;
 398 }
 399
 400 static void __exit pxa_cpu_exit(void)
 401 {
 402         cpufreq_unregister_driver(&pxa_cpufreq_driver);
 403 }
 404
 405
 406 MODULE_AUTHOR("Intrinsyc Software Inc.");
 407 MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
 408 MODULE_LICENSE("GPL");
 409 module_init(pxa_cpu_init);
 410 module_exit(pxa_cpu_exit);