include/asm-mips/sibyte/bcm1480_scd.h

   1 /*  *********************************************************************
   2     *  BCM1280/BCM1400 Board Support Package
   3     *
   4     *  SCD Constants and Macros                     File: bcm1480_scd.h
   5     *
   6     *  This module contains constants and macros useful for
   7     *  manipulating the System Control and Debug module.
   8     *
   9     *  BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
  10     *
  11     *********************************************************************
  12     *
  13     *  Copyright 2000,2001,2002,2003,2004,2005
  14     *  Broadcom Corporation. All rights reserved.
  15     *
  16     *  This program is free software; you can redistribute it and/or
  17     *  modify it under the terms of the GNU General Public License as
  18     *  published by the Free Software Foundation; either version 2 of
  19     *  the License, or (at your option) any later version.
  20     *
  21     *  This program is distributed in the hope that it will be useful,
  22     *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  23     *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24     *  GNU General Public License for more details.
  25     *
  26     *  You should have received a copy of the GNU General Public License
  27     *  along with this program; if not, write to the Free Software
  28     *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  29     *  MA 02111-1307 USA
  30     ********************************************************************* */
  31
  32 #ifndef _BCM1480_SCD_H
  33 #define _BCM1480_SCD_H
  34
  35 #include "sb1250_defs.h"
  36
  37 /*  *********************************************************************
  38     *  Pull in the BCM1250's SCD since lots of stuff is the same.
  39     ********************************************************************* */
  40
  41 #include "sb1250_scd.h"
  42
  43 /*  *********************************************************************
  44     *  Some general notes:
  45     *
  46     *  This file is basically a "what's new" header file.  Since the
  47     *  BCM1250 and the new BCM1480 (and derivatives) share many common
  48     *  features, this file contains only what's new or changed from
  49     *  the 1250.  (above, you can see that we include the 1250 symbols
  50     *  to get the base functionality).
  51     *
  52     *  In software, be sure to use the correct symbols, particularly
  53     *  for blocks that are different between the two chip families.
  54     *  All BCM1480-specific symbols have _BCM1480_ in their names,
  55     *  and all BCM1250-specific and "base" functions that are common in
  56     *  both chips have no special names (this is for compatibility with
  57     *  older include files).  Therefore, if you're working with the
  58     *  SCD, which is very different on each chip, A_SCD_xxx implies
  59     *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
  60     *  version.
  61     ********************************************************************* */
  62
  63 /*  *********************************************************************
  64     *  System control/debug registers
  65     ********************************************************************* */
  66
  67 /*
  68  * System Identification and Revision Register (Table 12)
  69  * Register: SCD_SYSTEM_REVISION
  70  * This register is field compatible with the 1250.
  71  */
  72
  73 /*
  74  * New part definitions
  75  */
  76
  77 #define K_SYS_PART_BCM1480          0x1406
  78 #define K_SYS_PART_BCM1280          0x1206
  79 #define K_SYS_PART_BCM1455          0x1407
  80 #define K_SYS_PART_BCM1255          0x1257
  81 #define K_SYS_PART_BCM1158          0x1156
  82
  83 /*
  84  * Manufacturing Information Register (Table 14)
  85  * Register: SCD_SYSTEM_MANUF
  86  */
  87
  88 /*
  89  * System Configuration Register (Table 15)
  90  * Register: SCD_SYSTEM_CFG
  91  * Entire register is different from 1250, all new constants below
  92  */
  93
  94 #define M_BCM1480_SYS_RESERVED0             _SB_MAKEMASK1(0)
  95 #define M_BCM1480_SYS_HT_MINRSTCNT          _SB_MAKEMASK1(1)
  96 #define M_BCM1480_SYS_RESERVED2             _SB_MAKEMASK1(2)
  97 #define M_BCM1480_SYS_RESERVED3             _SB_MAKEMASK1(3)
  98 #define M_BCM1480_SYS_RESERVED4             _SB_MAKEMASK1(4)
  99 #define M_BCM1480_SYS_IOB_DIV               _SB_MAKEMASK1(5)
 100
 101 #define S_BCM1480_SYS_PLL_DIV               _SB_MAKE64(6)
 102 #define M_BCM1480_SYS_PLL_DIV               _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV)
 103 #define V_BCM1480_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV)
 104 #define G_BCM1480_SYS_PLL_DIV(x)            _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV)
 105
 106 #define S_BCM1480_SYS_SW_DIV                _SB_MAKE64(11)
 107 #define M_BCM1480_SYS_SW_DIV                _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV)
 108 #define V_BCM1480_SYS_SW_DIV(x)             _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV)
 109 #define G_BCM1480_SYS_SW_DIV(x)             _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV)
 110
 111 #define M_BCM1480_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
 112 #define M_BCM1480_SYS_DUART1_ENABLE         _SB_MAKEMASK1(17)
 113
 114 #define S_BCM1480_SYS_BOOT_MODE             _SB_MAKE64(18)
 115 #define M_BCM1480_SYS_BOOT_MODE             _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE)
 116 #define V_BCM1480_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE)
 117 #define G_BCM1480_SYS_BOOT_MODE(x)          _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE)
 118 #define K_BCM1480_SYS_BOOT_MODE_ROM32       0
 119 #define K_BCM1480_SYS_BOOT_MODE_ROM8        1
 120 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
 121 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG   3
 122 #define M_BCM1480_SYS_BOOT_MODE_SMBUS       _SB_MAKEMASK1(19)
 123
 124 #define M_BCM1480_SYS_PCI_HOST              _SB_MAKEMASK1(20)
 125 #define M_BCM1480_SYS_PCI_ARBITER           _SB_MAKEMASK1(21)
 126 #define M_BCM1480_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
 127 #define M_BCM1480_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
 128 #define M_BCM1480_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(24)
 129 #define M_BCM1480_SYS_RESERVED25            _SB_MAKEMASK1(25)
 130
 131 #define S_BCM1480_SYS_CONFIG                26
 132 #define M_BCM1480_SYS_CONFIG                _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG)
 133 #define V_BCM1480_SYS_CONFIG(x)             _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG)
 134 #define G_BCM1480_SYS_CONFIG(x)             _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG)
 135
 136 #define M_BCM1480_SYS_RESERVED32            _SB_MAKEMASK(32,15)
 137
 138 #define S_BCM1480_SYS_NODEID                47
 139 #define M_BCM1480_SYS_NODEID                _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID)
 140 #define V_BCM1480_SYS_NODEID(x)             _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID)
 141 #define G_BCM1480_SYS_NODEID(x)             _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID)
 142
 143 #define M_BCM1480_SYS_CCNUMA_EN             _SB_MAKEMASK1(51)
 144 #define M_BCM1480_SYS_CPU_RESET_0           _SB_MAKEMASK1(52)
 145 #define M_BCM1480_SYS_CPU_RESET_1           _SB_MAKEMASK1(53)
 146 #define M_BCM1480_SYS_CPU_RESET_2           _SB_MAKEMASK1(54)
 147 #define M_BCM1480_SYS_CPU_RESET_3           _SB_MAKEMASK1(55)
 148 #define S_BCM1480_SYS_DISABLECPU0           56
 149 #define M_BCM1480_SYS_DISABLECPU0           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
 150 #define S_BCM1480_SYS_DISABLECPU1           57
 151 #define M_BCM1480_SYS_DISABLECPU1           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
 152 #define S_BCM1480_SYS_DISABLECPU2           58
 153 #define M_BCM1480_SYS_DISABLECPU2           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
 154 #define S_BCM1480_SYS_DISABLECPU3           59
 155 #define M_BCM1480_SYS_DISABLECPU3           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
 156
 157 #define M_BCM1480_SYS_SB_SOFTRES            _SB_MAKEMASK1(60)
 158 #define M_BCM1480_SYS_EXT_RESET             _SB_MAKEMASK1(61)
 159 #define M_BCM1480_SYS_SYSTEM_RESET          _SB_MAKEMASK1(62)
 160 #define M_BCM1480_SYS_SW_FLAG               _SB_MAKEMASK1(63)
 161
 162 /*
 163  * Scratch Register (Table 16)
 164  * Register: SCD_SYSTEM_SCRATCH
 165  * Same as BCM1250
 166  */
 167
 168
 169 /*
 170  * Mailbox Registers (Table 17)
 171  * Registers: SCD_MBOX_{0,1}_CPU_x
 172  * Same as BCM1250
 173  */
 174
 175
 176 /*
 177  * See bcm1480_int.h for interrupt mapper registers.
 178  */
 179
 180
 181 /*
 182  * Watchdog Timer Initial Count Registers (Table 23)
 183  * Registers: SCD_WDOG_INIT_CNT_x
 184  *
 185  * The watchdogs are almost the same as the 1250, except
 186  * the configuration register has more bits to control the
 187  * other CPUs.
 188  */
 189
 190
 191 /*
 192  * Watchdog Timer Configuration Registers (Table 25)
 193  * Registers: SCD_WDOG_CFG_x
 194  */
 195
 196 #define M_BCM1480_SCD_WDOG_ENABLE           _SB_MAKEMASK1(0)
 197
 198 #define S_BCM1480_SCD_WDOG_RESET_TYPE       2
 199 #define M_BCM1480_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE)
 200 #define V_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE)
 201 #define G_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE)
 202
 203 #define K_BCM1480_SCD_WDOG_RESET_FULL       0   /* actually, (x & 1) == 0  */
 204 #define K_BCM1480_SCD_WDOG_RESET_SOFT       1
 205 #define K_BCM1480_SCD_WDOG_RESET_CPU0       3
 206 #define K_BCM1480_SCD_WDOG_RESET_CPU1       5
 207 #define K_BCM1480_SCD_WDOG_RESET_CPU2       9
 208 #define K_BCM1480_SCD_WDOG_RESET_CPU3       17
 209 #define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS   31
 210
 211
 212 #define M_BCM1480_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(8)
 213
 214 /*
 215  * General Timer Initial Count Registers (Table 26)
 216  * Registers: SCD_TIMER_INIT_x
 217  *
 218  * The timer registers are the same as the BCM1250
 219  */
 220
 221
 222 /*
 223  * ZBbus Count Register (Table 29)
 224  * Register: ZBBUS_CYCLE_COUNT
 225  *
 226  * Same as BCM1250
 227  */
 228
 229 /*
 230  * ZBbus Compare Registers (Table 30)
 231  * Registers: ZBBUS_CYCLE_CPx
 232  *
 233  * Same as BCM1250
 234  */
 235
 236
 237 /*
 238  * System Performance Counter Configuration Register (Table 31)
 239  * Register: PERF_CNT_CFG_0
 240  *
 241  * SPC_CFG_SRC[0-3] is the same as the 1250.
 242  * SPC_CFG_SRC[4-7] only exist on the 1480
 243  * The clear/enable bits are in different locations on the 1250 and 1480.
 244  */
 245
 246 #define S_SPC_CFG_SRC4              32
 247 #define M_SPC_CFG_SRC4              _SB_MAKEMASK(8,S_SPC_CFG_SRC4)
 248 #define V_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC4)
 249 #define G_SPC_CFG_SRC4(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC4,M_SPC_CFG_SRC4)
 250
 251 #define S_SPC_CFG_SRC5              40
 252 #define M_SPC_CFG_SRC5              _SB_MAKEMASK(8,S_SPC_CFG_SRC5)
 253 #define V_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC5)
 254 #define G_SPC_CFG_SRC5(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC5,M_SPC_CFG_SRC5)
 255
 256 #define S_SPC_CFG_SRC6              48
 257 #define M_SPC_CFG_SRC6              _SB_MAKEMASK(8,S_SPC_CFG_SRC6)
 258 #define V_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC6)
 259 #define G_SPC_CFG_SRC6(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC6,M_SPC_CFG_SRC6)
 260
 261 #define S_SPC_CFG_SRC7              56
 262 #define M_SPC_CFG_SRC7              _SB_MAKEMASK(8,S_SPC_CFG_SRC7)
 263 #define V_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC7)
 264 #define G_SPC_CFG_SRC7(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC7,M_SPC_CFG_SRC7)
 265
 266 /*
 267  * System Performance Counter Control Register (Table 32)
 268  * Register: PERF_CNT_CFG_1
 269  * BCM1480 specific
 270  */
 271 #define M_BCM1480_SPC_CFG_CLEAR     _SB_MAKEMASK1(0)
 272 #define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
 273 #if SIBYTE_HDR_FEATURE_CHIP(1480)
 274 #define M_SPC_CFG_CLEAR                 M_BCM1480_SPC_CFG_CLEAR
 275 #define M_SPC_CFG_ENABLE                M_BCM1480_SPC_CFG_ENABLE
 276 #endif
 277
 278 /*
 279  * System Performance Counters (Table 33)
 280  * Registers: PERF_CNT_x
 281  */
 282
 283 #define S_BCM1480_SPC_CNT_COUNT             0
 284 #define M_BCM1480_SPC_CNT_COUNT             _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT)
 285 #define V_BCM1480_SPC_CNT_COUNT(x)          _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT)
 286 #define G_BCM1480_SPC_CNT_COUNT(x)          _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT)
 287
 288 #define M_BCM1480_SPC_CNT_OFLOW             _SB_MAKEMASK1(40)
 289
 290
 291 /*
 292  * Bus Watcher Error Status Register (Tables 36, 37)
 293  * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
 294  * Same as BCM1250.
 295  */
 296
 297 /*
 298  * Bus Watcher Error Data Registers (Table 38)
 299  * Registers: BUS_ERR_DATA_x
 300  * Same as BCM1250.
 301  */
 302
 303 /*
 304  * Bus Watcher L2 ECC Counter Register (Table 39)
 305  * Register: BUS_L2_ERRORS
 306  * Same as BCM1250.
 307  */
 308
 309
 310 /*
 311  * Bus Watcher Memory and I/O Error Counter Register (Table 40)
 312  * Register: BUS_MEM_IO_ERRORS
 313  * Same as BCM1250.
 314  */
 315
 316
 317 /*
 318  * Address Trap Registers
 319  *
 320  * Register layout same as BCM1250, almost.  The bus agents
 321  * are different, and the address trap configuration bits are
 322  * slightly different.
 323  */
 324
 325 #define M_BCM1480_ATRAP_INDEX             _SB_MAKEMASK(4,0)
 326 #define M_BCM1480_ATRAP_ADDRESS           _SB_MAKEMASK(40,0)
 327
 328 #define S_BCM1480_ATRAP_CFG_CNT            0
 329 #define M_BCM1480_ATRAP_CFG_CNT            _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT)
 330 #define V_BCM1480_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT)
 331 #define G_BCM1480_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT)
 332
 333 #define M_BCM1480_ATRAP_CFG_WRITE          _SB_MAKEMASK1(3)
 334 #define M_BCM1480_ATRAP_CFG_ALL            _SB_MAKEMASK1(4)
 335 #define M_BCM1480_ATRAP_CFG_INV            _SB_MAKEMASK1(5)
 336 #define M_BCM1480_ATRAP_CFG_USESRC         _SB_MAKEMASK1(6)
 337 #define M_BCM1480_ATRAP_CFG_SRCINV         _SB_MAKEMASK1(7)
 338
 339 #define S_BCM1480_ATRAP_CFG_AGENTID     8
 340 #define M_BCM1480_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID)
 341 #define V_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID)
 342 #define G_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID)
 343
 344
 345 #define K_BCM1480_BUS_AGENT_CPU0            0
 346 #define K_BCM1480_BUS_AGENT_CPU1            1
 347 #define K_BCM1480_BUS_AGENT_NC              2
 348 #define K_BCM1480_BUS_AGENT_IOB             3
 349 #define K_BCM1480_BUS_AGENT_SCD             4
 350 #define K_BCM1480_BUS_AGENT_L2C             6
 351 #define K_BCM1480_BUS_AGENT_MC              7
 352 #define K_BCM1480_BUS_AGENT_CPU2            8
 353 #define K_BCM1480_BUS_AGENT_CPU3            9
 354 #define K_BCM1480_BUS_AGENT_PM              10
 355
 356 #define S_BCM1480_ATRAP_CFG_CATTR           12
 357 #define M_BCM1480_ATRAP_CFG_CATTR           _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR)
 358 #define V_BCM1480_ATRAP_CFG_CATTR(x)        _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR)
 359 #define G_BCM1480_ATRAP_CFG_CATTR(x)        _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR)
 360
 361 #define K_BCM1480_ATRAP_CFG_CATTR_IGNORE    0
 362 #define K_BCM1480_ATRAP_CFG_CATTR_UNC       1
 363 #define K_BCM1480_ATRAP_CFG_CATTR_NONCOH    2
 364 #define K_BCM1480_ATRAP_CFG_CATTR_COHERENT  3
 365
 366 #define M_BCM1480_ATRAP_CFG_CATTRINV        _SB_MAKEMASK1(14)
 367
 368
 369 /*
 370  * Trace Event Registers (Table 47)
 371  * Same as BCM1250.
 372  */
 373
 374 /*
 375  * Trace Sequence Control Registers (Table 48)
 376  * Registers: TRACE_SEQUENCE_x
 377  *
 378  * Same as BCM1250 except for two new fields.
 379  */
 380
 381
 382 #define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN    _SB_MAKEMASK1(25)
 383
 384 #define S_BCM1480_SCD_TRSEQ_SWFUNC          26
 385 #define M_BCM1480_SCD_TRSEQ_SWFUNC          _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC)
 386 #define V_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC)
 387 #define G_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC)
 388
 389 /*
 390  * Trace Control Register (Table 49)
 391  * Register: TRACE_CFG
 392  *
 393  * BCM1480 changes to this register (other than location of the CUR_ADDR field)
 394  * are defined below.
 395  */
 396
 397 #define S_BCM1480_SCD_TRACE_CFG_MODE        16
 398 #define M_BCM1480_SCD_TRACE_CFG_MODE        _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
 399 #define V_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
 400 #define G_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE)
 401
 402 #define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS   0
 403 #define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
 404 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID    2
 405
 406 #endif /* _BCM1480_SCD_H */