4 * Procedures for interfacing to Open Firmware.
6 * Paul Mackerras August 1996.
7 * Copyright (C) 1996 Paul Mackerras.
9 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
10 * {engebret|bergner}@us.ibm.com
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
21 #include <linux/config.h>
22 #include <linux/kernel.h>
23 #include <linux/string.h>
24 #include <linux/init.h>
25 #include <linux/threads.h>
26 #include <linux/spinlock.h>
27 #include <linux/types.h>
28 #include <linux/pci.h>
29 #include <linux/proc_fs.h>
30 #include <linux/stringify.h>
31 #include <linux/delay.h>
32 #include <linux/initrd.h>
33 #include <linux/bitops.h>
36 #include <asm/abs_addr.h>
38 #include <asm/processor.h>
42 #include <asm/system.h>
44 #include <asm/pgtable.h>
46 #include <asm/iommu.h>
47 #include <asm/btext.h>
48 #include <asm/sections.h>
49 #include <asm/machdep.h>
51 #ifdef CONFIG_LOGO_LINUX_CLUT224
52 #include <linux/linux_logo.h>
53 extern const struct linux_logo logo_linux_clut224
;
57 * Properties whose value is longer than this get excluded from our
58 * copy of the device tree. This value does need to be big enough to
59 * ensure that we don't lose things like the interrupt-map property
60 * on a PCI-PCI bridge.
62 #define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024)
65 * Eventually bump that one up
67 #define DEVTREE_CHUNK_SIZE 0x100000
70 * This is the size of the local memory reserve map that gets copied
71 * into the boot params passed to the kernel. That size is totally
72 * flexible as the kernel just reads the list until it encounters an
73 * entry with size 0, so it can be changed without breaking binary
76 #define MEM_RESERVE_MAP_SIZE 8
79 * prom_init() is called very early on, before the kernel text
80 * and data have been mapped to KERNELBASE. At this point the code
81 * is running at whatever address it has been loaded at, so
82 * references to extern and static variables must be relocated
83 * explicitly. The procedure reloc_offset() returns the address
84 * we're currently running at minus the address we were linked at.
85 * (Note that strings count as static variables.)
87 * Because OF may have mapped I/O devices into the area starting at
88 * KERNELBASE, particularly on CHRP machines, we can't safely call
89 * OF once the kernel has been mapped to KERNELBASE. Therefore all
90 * OF calls should be done within prom_init(), and prom_init()
91 * and all routines called within it must be careful to relocate
92 * references as necessary.
94 * Note that the bss is cleared *after* prom_init runs, so we have
95 * to make sure that any static or extern variables it accesses
96 * are put in the data segment.
100 #define PROM_BUG() do { \
101 prom_printf("kernel BUG at %s line 0x%x!\n", \
102 RELOC(__FILE__), __LINE__); \
103 __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \
107 #define prom_debug(x...) prom_printf(x)
109 #define prom_debug(x...)
113 typedef u32 prom_arg_t
;
120 prom_arg_t
*rets
; /* Pointer to return values in args[16]. */
130 struct prom_args args
;
131 unsigned long version
;
132 unsigned long root_size_cells
;
133 unsigned long root_addr_cells
;
136 struct pci_reg_property
{
137 struct pci_address addr
;
142 struct mem_map_entry
{
149 extern void __start(unsigned long r3
, unsigned long r4
, unsigned long r5
);
151 extern void enter_prom(struct prom_args
*args
, unsigned long entry
);
152 extern void copy_and_flush(unsigned long dest
, unsigned long src
,
153 unsigned long size
, unsigned long offset
);
155 extern unsigned long klimit
;
158 static struct prom_t __initdata prom
;
160 #define PROM_SCRATCH_SIZE 256
162 static char __initdata of_stdout_device
[256];
163 static char __initdata prom_scratch
[PROM_SCRATCH_SIZE
];
165 static unsigned long __initdata dt_header_start
;
166 static unsigned long __initdata dt_struct_start
, dt_struct_end
;
167 static unsigned long __initdata dt_string_start
, dt_string_end
;
169 static unsigned long __initdata prom_initrd_start
, prom_initrd_end
;
171 static int __initdata iommu_force_on
;
172 static int __initdata ppc64_iommu_off
;
173 static int __initdata of_platform
;
175 static char __initdata prom_cmd_line
[COMMAND_LINE_SIZE
];
177 static unsigned long __initdata prom_memory_limit
;
178 static unsigned long __initdata prom_tce_alloc_start
;
179 static unsigned long __initdata prom_tce_alloc_end
;
181 static unsigned long __initdata alloc_top
;
182 static unsigned long __initdata alloc_top_high
;
183 static unsigned long __initdata alloc_bottom
;
184 static unsigned long __initdata rmo_top
;
185 static unsigned long __initdata ram_top
;
187 static struct mem_map_entry __initdata mem_reserve_map
[MEM_RESERVE_MAP_SIZE
];
188 static int __initdata mem_reserve_cnt
;
190 static cell_t __initdata regbuf
[1024];
193 #define MAX_CPU_THREADS 2
199 unsigned int threadid
;
200 } hmt_thread_data
[NR_CPUS
];
201 #endif /* CONFIG_HMT */
204 * This are used in calls to call_prom. The 4th and following
205 * arguments to call_prom should be 32-bit values. 64 bit values
206 * are truncated to 32 bits (and fortunately don't get interpreted
209 #define ADDR(x) (u32) ((unsigned long)(x) - offset)
212 * Error results ... some OF calls will return "-1" on error, some
213 * will return 0, some will return either. To simplify, here are
214 * macros to use with any ihandle or phandle return value to check if
218 #define PROM_ERROR (-1u)
219 #define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
220 #define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
223 /* This is the one and *ONLY* place where we actually call open
224 * firmware from, since we need to make sure we're running in 32b
225 * mode when we do. We switch back to 64b mode upon return.
228 static int __init
call_prom(const char *service
, int nargs
, int nret
, ...)
231 unsigned long offset
= reloc_offset();
232 struct prom_t
*_prom
= PTRRELOC(&prom
);
235 _prom
->args
.service
= ADDR(service
);
236 _prom
->args
.nargs
= nargs
;
237 _prom
->args
.nret
= nret
;
238 _prom
->args
.rets
= (prom_arg_t
*)&(_prom
->args
.args
[nargs
]);
240 va_start(list
, nret
);
241 for (i
=0; i
< nargs
; i
++)
242 _prom
->args
.args
[i
] = va_arg(list
, prom_arg_t
);
245 for (i
=0; i
< nret
;i
++)
246 _prom
->args
.rets
[i
] = 0;
248 enter_prom(&_prom
->args
, _prom
->entry
);
250 return (nret
> 0) ? _prom
->args
.rets
[0] : 0;
254 static unsigned int __init
prom_claim(unsigned long virt
, unsigned long size
,
257 return (unsigned int)call_prom("claim", 3, 1,
258 (prom_arg_t
)virt
, (prom_arg_t
)size
,
262 static void __init
prom_print(const char *msg
)
265 unsigned long offset
= reloc_offset();
266 struct prom_t
*_prom
= PTRRELOC(&prom
);
268 if (_prom
->stdout
== 0)
271 for (p
= msg
; *p
!= 0; p
= q
) {
272 for (q
= p
; *q
!= 0 && *q
!= '\n'; ++q
)
275 call_prom("write", 3, 1, _prom
->stdout
, p
, q
- p
);
279 call_prom("write", 3, 1, _prom
->stdout
, ADDR("\r\n"), 2);
284 static void __init
prom_print_hex(unsigned long val
)
286 unsigned long offset
= reloc_offset();
287 int i
, nibbles
= sizeof(val
)*2;
288 char buf
[sizeof(val
)*2+1];
289 struct prom_t
*_prom
= PTRRELOC(&prom
);
291 for (i
= nibbles
-1; i
>= 0; i
--) {
292 buf
[i
] = (val
& 0xf) + '0';
294 buf
[i
] += ('a'-'0'-10);
298 call_prom("write", 3, 1, _prom
->stdout
, buf
, nibbles
);
302 static void __init
prom_printf(const char *format
, ...)
304 unsigned long offset
= reloc_offset();
305 const char *p
, *q
, *s
;
308 struct prom_t
*_prom
= PTRRELOC(&prom
);
310 va_start(args
, format
);
311 for (p
= PTRRELOC(format
); *p
!= 0; p
= q
) {
312 for (q
= p
; *q
!= 0 && *q
!= '\n' && *q
!= '%'; ++q
)
315 call_prom("write", 3, 1, _prom
->stdout
, p
, q
- p
);
320 call_prom("write", 3, 1, _prom
->stdout
,
330 s
= va_arg(args
, const char *);
335 v
= va_arg(args
, unsigned long);
343 static void __init
__attribute__((noreturn
)) prom_panic(const char *reason
)
345 unsigned long offset
= reloc_offset();
347 prom_print(PTRRELOC(reason
));
348 /* ToDo: should put up an SRC here */
349 call_prom("exit", 0, 0);
351 for (;;) /* should never get here */
356 static int __init
prom_next_node(phandle
*nodep
)
360 if ((node
= *nodep
) != 0
361 && (*nodep
= call_prom("child", 1, 1, node
)) != 0)
363 if ((*nodep
= call_prom("peer", 1, 1, node
)) != 0)
366 if ((node
= call_prom("parent", 1, 1, node
)) == 0)
368 if ((*nodep
= call_prom("peer", 1, 1, node
)) != 0)
373 static int __init
prom_getprop(phandle node
, const char *pname
,
374 void *value
, size_t valuelen
)
376 unsigned long offset
= reloc_offset();
378 return call_prom("getprop", 4, 1, node
, ADDR(pname
),
379 (u32
)(unsigned long) value
, (u32
) valuelen
);
382 static int __init
prom_getproplen(phandle node
, const char *pname
)
384 unsigned long offset
= reloc_offset();
386 return call_prom("getproplen", 2, 1, node
, ADDR(pname
));
389 static int __init
prom_setprop(phandle node
, const char *pname
,
390 void *value
, size_t valuelen
)
392 unsigned long offset
= reloc_offset();
394 return call_prom("setprop", 4, 1, node
, ADDR(pname
),
395 (u32
)(unsigned long) value
, (u32
) valuelen
);
398 /* We can't use the standard versions because of RELOC headaches. */
399 #define isxdigit(c) (('0' <= (c) && (c) <= '9') \
400 || ('a' <= (c) && (c) <= 'f') \
401 || ('A' <= (c) && (c) <= 'F'))
403 #define isdigit(c) ('0' <= (c) && (c) <= '9')
404 #define islower(c) ('a' <= (c) && (c) <= 'z')
405 #define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
407 unsigned long prom_strtoul(const char *cp
, const char **endp
)
409 unsigned long result
= 0, base
= 10, value
;
414 if (toupper(*cp
) == 'X') {
420 while (isxdigit(*cp
) &&
421 (value
= isdigit(*cp
) ? *cp
- '0' : toupper(*cp
) - 'A' + 10) < base
) {
422 result
= result
* base
+ value
;
432 unsigned long prom_memparse(const char *ptr
, const char **retptr
)
434 unsigned long ret
= prom_strtoul(ptr
, retptr
);
438 * We can't use a switch here because GCC *may* generate a
439 * jump table which won't work, because we're not running at
440 * the address we're linked at.
442 if ('G' == **retptr
|| 'g' == **retptr
)
445 if ('M' == **retptr
|| 'm' == **retptr
)
448 if ('K' == **retptr
|| 'k' == **retptr
)
460 * Early parsing of the command line passed to the kernel, used for
461 * "mem=x" and the options that affect the iommu
463 static void __init
early_cmdline_parse(void)
465 unsigned long offset
= reloc_offset();
466 struct prom_t
*_prom
= PTRRELOC(&prom
);
470 RELOC(prom_cmd_line
[0]) = 0;
471 p
= RELOC(prom_cmd_line
);
472 if ((long)_prom
->chosen
> 0)
473 l
= prom_getprop(_prom
->chosen
, "bootargs", p
, COMMAND_LINE_SIZE
-1);
474 #ifdef CONFIG_CMDLINE
475 if (l
== 0) /* dbl check */
476 strlcpy(RELOC(prom_cmd_line
),
477 RELOC(CONFIG_CMDLINE
), sizeof(prom_cmd_line
));
478 #endif /* CONFIG_CMDLINE */
479 prom_printf("command line: %s\n", RELOC(prom_cmd_line
));
481 opt
= strstr(RELOC(prom_cmd_line
), RELOC("iommu="));
483 prom_printf("iommu opt is: %s\n", opt
);
485 while (*opt
&& *opt
== ' ')
487 if (!strncmp(opt
, RELOC("off"), 3))
488 RELOC(ppc64_iommu_off
) = 1;
489 else if (!strncmp(opt
, RELOC("force"), 5))
490 RELOC(iommu_force_on
) = 1;
493 opt
= strstr(RELOC(prom_cmd_line
), RELOC("mem="));
496 RELOC(prom_memory_limit
) = prom_memparse(opt
, (const char **)&opt
);
497 /* Align to 16 MB == size of large page */
498 RELOC(prom_memory_limit
) = ALIGN(RELOC(prom_memory_limit
), 0x1000000);
503 * To tell the firmware what our capabilities are, we have to pass
504 * it a fake 32-bit ELF header containing a couple of PT_NOTE sections
505 * that contain structures that contain the actual values.
507 static struct fake_elf
{
514 char name
[8]; /* "PowerPC" */
528 char name
[24]; /* "IBM,RPA-Client-Config" */
542 .e_ident
= { 0x7f, 'E', 'L', 'F',
543 ELFCLASS32
, ELFDATA2MSB
, EV_CURRENT
},
544 .e_type
= ET_EXEC
, /* yeah right */
546 .e_version
= EV_CURRENT
,
547 .e_phoff
= offsetof(struct fake_elf
, phdr
),
548 .e_phentsize
= sizeof(Elf32_Phdr
),
554 .p_offset
= offsetof(struct fake_elf
, chrpnote
),
555 .p_filesz
= sizeof(struct chrpnote
)
558 .p_offset
= offsetof(struct fake_elf
, rpanote
),
559 .p_filesz
= sizeof(struct rpanote
)
563 .namesz
= sizeof("PowerPC"),
564 .descsz
= sizeof(struct chrpdesc
),
568 .real_mode
= ~0U, /* ~0 means "don't care" */
577 .namesz
= sizeof("IBM,RPA-Client-Config"),
578 .descsz
= sizeof(struct rpadesc
),
580 .name
= "IBM,RPA-Client-Config",
583 .min_rmo_size
= 64, /* in megabytes */
584 .min_rmo_percent
= 0,
585 .max_pft_size
= 48, /* 2^48 bytes max PFT size */
593 static void __init
prom_send_capabilities(void)
595 unsigned long offset
= reloc_offset();
598 elfloader
= call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
599 if (elfloader
== 0) {
600 prom_printf("couldn't open /packages/elf-loader\n");
603 call_prom("call-method", 3, 1, ADDR("process-elf-header"),
604 elfloader
, ADDR(&fake_elf
));
605 call_prom("close", 1, 0, elfloader
);
609 * Memory allocation strategy... our layout is normally:
611 * at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd
612 * might end up beeing before the kernel though. We assume this won't override
613 * the final kernel at 0, we have no provision to handle that in this version,
614 * but it should hopefully never happen.
616 * alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap
617 * alloc_bottom is set to the top of kernel/initrd
619 * from there, allocations are done that way : rtas is allocated topmost, and
620 * the device-tree is allocated from the bottom. We try to grow the device-tree
621 * allocation as we progress. If we can't, then we fail, we don't currently have
622 * a facility to restart elsewhere, but that shouldn't be necessary neither
624 * Note that calls to reserve_mem have to be done explicitely, memory allocated
625 * with either alloc_up or alloc_down isn't automatically reserved.
630 * Allocates memory in the RMO upward from the kernel/initrd
632 * When align is 0, this is a special case, it means to allocate in place
633 * at the current location of alloc_bottom or fail (that is basically
634 * extending the previous allocation). Used for the device-tree flattening
636 static unsigned long __init
alloc_up(unsigned long size
, unsigned long align
)
638 unsigned long offset
= reloc_offset();
639 unsigned long base
= _ALIGN_UP(RELOC(alloc_bottom
), align
);
640 unsigned long addr
= 0;
642 prom_debug("alloc_up(%x, %x)\n", size
, align
);
643 if (RELOC(ram_top
) == 0)
644 prom_panic("alloc_up() called with mem not initialized\n");
647 base
= _ALIGN_UP(RELOC(alloc_bottom
), align
);
649 base
= RELOC(alloc_bottom
);
651 for(; (base
+ size
) <= RELOC(alloc_top
);
652 base
= _ALIGN_UP(base
+ 0x100000, align
)) {
653 prom_debug(" trying: 0x%x\n\r", base
);
654 addr
= (unsigned long)prom_claim(base
, size
, 0);
655 if (addr
!= PROM_ERROR
)
663 RELOC(alloc_bottom
) = addr
;
665 prom_debug(" -> %x\n", addr
);
666 prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom
));
667 prom_debug(" alloc_top : %x\n", RELOC(alloc_top
));
668 prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high
));
669 prom_debug(" rmo_top : %x\n", RELOC(rmo_top
));
670 prom_debug(" ram_top : %x\n", RELOC(ram_top
));
676 * Allocates memory downard, either from top of RMO, or if highmem
677 * is set, from the top of RAM. Note that this one doesn't handle
678 * failures. In does claim memory if highmem is not set.
680 static unsigned long __init
alloc_down(unsigned long size
, unsigned long align
,
683 unsigned long offset
= reloc_offset();
684 unsigned long base
, addr
= 0;
686 prom_debug("alloc_down(%x, %x, %s)\n", size
, align
,
687 highmem
? RELOC("(high)") : RELOC("(low)"));
688 if (RELOC(ram_top
) == 0)
689 prom_panic("alloc_down() called with mem not initialized\n");
692 /* Carve out storage for the TCE table. */
693 addr
= _ALIGN_DOWN(RELOC(alloc_top_high
) - size
, align
);
694 if (addr
<= RELOC(alloc_bottom
))
697 /* Will we bump into the RMO ? If yes, check out that we
698 * didn't overlap existing allocations there, if we did,
699 * we are dead, we must be the first in town !
701 if (addr
< RELOC(rmo_top
)) {
702 /* Good, we are first */
703 if (RELOC(alloc_top
) == RELOC(rmo_top
))
704 RELOC(alloc_top
) = RELOC(rmo_top
) = addr
;
708 RELOC(alloc_top_high
) = addr
;
713 base
= _ALIGN_DOWN(RELOC(alloc_top
) - size
, align
);
714 for(; base
> RELOC(alloc_bottom
); base
= _ALIGN_DOWN(base
- 0x100000, align
)) {
715 prom_debug(" trying: 0x%x\n\r", base
);
716 addr
= (unsigned long)prom_claim(base
, size
, 0);
717 if (addr
!= PROM_ERROR
)
723 RELOC(alloc_top
) = addr
;
726 prom_debug(" -> %x\n", addr
);
727 prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom
));
728 prom_debug(" alloc_top : %x\n", RELOC(alloc_top
));
729 prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high
));
730 prom_debug(" rmo_top : %x\n", RELOC(rmo_top
));
731 prom_debug(" ram_top : %x\n", RELOC(ram_top
));
739 static unsigned long __init
prom_next_cell(int s
, cell_t
**cellp
)
744 /* Ignore more than 2 cells */
760 * Very dumb function for adding to the memory reserve list, but
761 * we don't need anything smarter at this point
763 * XXX Eventually check for collisions. They should NEVER happen
764 * if problems seem to show up, it would be a good start to track
767 static void reserve_mem(unsigned long base
, unsigned long size
)
769 unsigned long offset
= reloc_offset();
770 unsigned long top
= base
+ size
;
771 unsigned long cnt
= RELOC(mem_reserve_cnt
);
776 /* We need to always keep one empty entry so that we
777 * have our terminator with "size" set to 0 since we are
778 * dumb and just copy this entire array to the boot params
780 base
= _ALIGN_DOWN(base
, PAGE_SIZE
);
781 top
= _ALIGN_UP(top
, PAGE_SIZE
);
784 if (cnt
>= (MEM_RESERVE_MAP_SIZE
- 1))
785 prom_panic("Memory reserve map exhausted !\n");
786 RELOC(mem_reserve_map
)[cnt
].base
= base
;
787 RELOC(mem_reserve_map
)[cnt
].size
= size
;
788 RELOC(mem_reserve_cnt
) = cnt
+ 1;
792 * Initialize memory allocation mecanism, parse "memory" nodes and
793 * obtain that way the top of memory and RMO to setup out local allocator
795 static void __init
prom_init_mem(void)
798 char *path
, type
[64];
801 unsigned long offset
= reloc_offset();
802 struct prom_t
*_prom
= PTRRELOC(&prom
);
805 * We iterate the memory nodes to find
806 * 1) top of RMO (first node)
809 prom_debug("root_addr_cells: %x\n", (long)_prom
->root_addr_cells
);
810 prom_debug("root_size_cells: %x\n", (long)_prom
->root_size_cells
);
812 prom_debug("scanning memory:\n");
813 path
= RELOC(prom_scratch
);
815 for (node
= 0; prom_next_node(&node
); ) {
817 prom_getprop(node
, "device_type", type
, sizeof(type
));
819 if (strcmp(type
, RELOC("memory")))
822 plen
= prom_getprop(node
, "reg", RELOC(regbuf
), sizeof(regbuf
));
823 if (plen
> sizeof(regbuf
)) {
824 prom_printf("memory node too large for buffer !\n");
825 plen
= sizeof(regbuf
);
828 endp
= p
+ (plen
/ sizeof(cell_t
));
831 memset(path
, 0, PROM_SCRATCH_SIZE
);
832 call_prom("package-to-path", 3, 1, node
, path
, PROM_SCRATCH_SIZE
-1);
833 prom_debug(" node %s :\n", path
);
834 #endif /* DEBUG_PROM */
836 while ((endp
- p
) >= (_prom
->root_addr_cells
+ _prom
->root_size_cells
)) {
837 unsigned long base
, size
;
839 base
= prom_next_cell(_prom
->root_addr_cells
, &p
);
840 size
= prom_next_cell(_prom
->root_size_cells
, &p
);
844 prom_debug(" %x %x\n", base
, size
);
846 RELOC(rmo_top
) = size
;
847 if ((base
+ size
) > RELOC(ram_top
))
848 RELOC(ram_top
) = base
+ size
;
852 RELOC(alloc_bottom
) = PAGE_ALIGN(RELOC(klimit
) - offset
+ 0x4000);
854 /* Check if we have an initrd after the kernel, if we do move our bottom
857 if (RELOC(prom_initrd_start
)) {
858 if (RELOC(prom_initrd_end
) > RELOC(alloc_bottom
))
859 RELOC(alloc_bottom
) = PAGE_ALIGN(RELOC(prom_initrd_end
));
863 * If prom_memory_limit is set we reduce the upper limits *except* for
864 * alloc_top_high. This must be the real top of RAM so we can put
868 RELOC(alloc_top_high
) = RELOC(ram_top
);
870 if (RELOC(prom_memory_limit
)) {
871 if (RELOC(prom_memory_limit
) <= RELOC(alloc_bottom
)) {
872 prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
873 RELOC(prom_memory_limit
));
874 RELOC(prom_memory_limit
) = 0;
875 } else if (RELOC(prom_memory_limit
) >= RELOC(ram_top
)) {
876 prom_printf("Ignoring mem=%x >= ram_top.\n",
877 RELOC(prom_memory_limit
));
878 RELOC(prom_memory_limit
) = 0;
880 RELOC(ram_top
) = RELOC(prom_memory_limit
);
881 RELOC(rmo_top
) = min(RELOC(rmo_top
), RELOC(prom_memory_limit
));
886 * Setup our top alloc point, that is top of RMO or top of
887 * segment 0 when running non-LPAR.
889 if ( RELOC(of_platform
) == PLATFORM_PSERIES_LPAR
)
890 RELOC(alloc_top
) = RELOC(rmo_top
);
892 /* Some RS64 machines have buggy firmware where claims up at 1GB
893 * fails. Cap at 768MB as a workaround. Still plenty of room.
895 RELOC(alloc_top
) = RELOC(rmo_top
) = min(0x30000000ul
, RELOC(ram_top
));
897 prom_printf("memory layout at init:\n");
898 prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit
));
899 prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom
));
900 prom_printf(" alloc_top : %x\n", RELOC(alloc_top
));
901 prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high
));
902 prom_printf(" rmo_top : %x\n", RELOC(rmo_top
));
903 prom_printf(" ram_top : %x\n", RELOC(ram_top
));
908 * Allocate room for and instanciate RTAS
910 static void __init
prom_instantiate_rtas(void)
912 unsigned long offset
= reloc_offset();
913 struct prom_t
*_prom
= PTRRELOC(&prom
);
919 prom_debug("prom_instantiate_rtas: start...\n");
921 rtas_node
= call_prom("finddevice", 1, 1, ADDR("/rtas"));
922 prom_debug("rtas_node: %x\n", rtas_node
);
923 if (!PHANDLE_VALID(rtas_node
))
926 prom_getprop(rtas_node
, "rtas-size", &size
, sizeof(size
));
930 base
= alloc_down(size
, PAGE_SIZE
, 0);
932 prom_printf("RTAS allocation failed !\n");
936 rtas_inst
= call_prom("open", 1, 1, ADDR("/rtas"));
937 if (!IHANDLE_VALID(rtas_inst
)) {
938 prom_printf("opening rtas package failed");
942 prom_printf("instantiating rtas at 0x%x ...", base
);
944 if (call_prom("call-method", 3, 2,
945 ADDR("instantiate-rtas"),
946 rtas_inst
, base
) != PROM_ERROR
) {
947 entry
= (long)_prom
->args
.rets
[1];
950 prom_printf(" failed\n");
953 prom_printf(" done\n");
955 reserve_mem(base
, size
);
957 prom_setprop(rtas_node
, "linux,rtas-base", &base
, sizeof(base
));
958 prom_setprop(rtas_node
, "linux,rtas-entry", &entry
, sizeof(entry
));
960 prom_debug("rtas base = 0x%x\n", base
);
961 prom_debug("rtas entry = 0x%x\n", entry
);
962 prom_debug("rtas size = 0x%x\n", (long)size
);
964 prom_debug("prom_instantiate_rtas: end...\n");
969 * Allocate room for and initialize TCE tables
971 static void __init
prom_initialize_tce_table(void)
975 unsigned long offset
= reloc_offset();
976 char compatible
[64], type
[64], model
[64];
977 char *path
= RELOC(prom_scratch
);
979 u32 minalign
, minsize
;
980 u64 tce_entry
, *tce_entryp
;
981 u64 local_alloc_top
, local_alloc_bottom
;
984 if (RELOC(ppc64_iommu_off
))
987 prom_debug("starting prom_initialize_tce_table\n");
989 /* Cache current top of allocs so we reserve a single block */
990 local_alloc_top
= RELOC(alloc_top_high
);
991 local_alloc_bottom
= local_alloc_top
;
993 /* Search all nodes looking for PHBs. */
994 for (node
= 0; prom_next_node(&node
); ) {
998 prom_getprop(node
, "compatible",
999 compatible
, sizeof(compatible
));
1000 prom_getprop(node
, "device_type", type
, sizeof(type
));
1001 prom_getprop(node
, "model", model
, sizeof(model
));
1003 if ((type
[0] == 0) || (strstr(type
, RELOC("pci")) == NULL
))
1006 /* Keep the old logic in tack to avoid regression. */
1007 if (compatible
[0] != 0) {
1008 if ((strstr(compatible
, RELOC("python")) == NULL
) &&
1009 (strstr(compatible
, RELOC("Speedwagon")) == NULL
) &&
1010 (strstr(compatible
, RELOC("Winnipeg")) == NULL
))
1012 } else if (model
[0] != 0) {
1013 if ((strstr(model
, RELOC("ython")) == NULL
) &&
1014 (strstr(model
, RELOC("peedwagon")) == NULL
) &&
1015 (strstr(model
, RELOC("innipeg")) == NULL
))
1019 if (prom_getprop(node
, "tce-table-minalign", &minalign
,
1020 sizeof(minalign
)) == PROM_ERROR
)
1022 if (prom_getprop(node
, "tce-table-minsize", &minsize
,
1023 sizeof(minsize
)) == PROM_ERROR
)
1024 minsize
= 4UL << 20;
1027 * Even though we read what OF wants, we just set the table
1028 * size to 4 MB. This is enough to map 2GB of PCI DMA space.
1029 * By doing this, we avoid the pitfalls of trying to DMA to
1030 * MMIO space and the DMA alias hole.
1032 * On POWER4, firmware sets the TCE region by assuming
1033 * each TCE table is 8MB. Using this memory for anything
1034 * else will impact performance, so we always allocate 8MB.
1037 if (__is_processor(PV_POWER4
) || __is_processor(PV_POWER4p
))
1038 minsize
= 8UL << 20;
1040 minsize
= 4UL << 20;
1042 /* Align to the greater of the align or size */
1043 align
= max(minalign
, minsize
);
1044 base
= alloc_down(minsize
, align
, 1);
1046 prom_panic("ERROR, cannot find space for TCE table.\n");
1047 if (base
< local_alloc_bottom
)
1048 local_alloc_bottom
= base
;
1050 /* Save away the TCE table attributes for later use. */
1051 prom_setprop(node
, "linux,tce-base", &base
, sizeof(base
));
1052 prom_setprop(node
, "linux,tce-size", &minsize
, sizeof(minsize
));
1054 /* It seems OF doesn't null-terminate the path :-( */
1055 memset(path
, 0, sizeof(path
));
1056 /* Call OF to setup the TCE hardware */
1057 if (call_prom("package-to-path", 3, 1, node
,
1058 path
, PROM_SCRATCH_SIZE
-1) == PROM_ERROR
) {
1059 prom_printf("package-to-path failed\n");
1062 prom_debug("TCE table: %s\n", path
);
1063 prom_debug("\tnode = 0x%x\n", node
);
1064 prom_debug("\tbase = 0x%x\n", base
);
1065 prom_debug("\tsize = 0x%x\n", minsize
);
1067 /* Initialize the table to have a one-to-one mapping
1068 * over the allocated size.
1070 tce_entryp
= (unsigned long *)base
;
1071 for (i
= 0; i
< (minsize
>> 3) ;tce_entryp
++, i
++) {
1072 tce_entry
= (i
<< PAGE_SHIFT
);
1074 *tce_entryp
= tce_entry
;
1077 prom_printf("opening PHB %s", path
);
1078 phb_node
= call_prom("open", 1, 1, path
);
1080 prom_printf("... failed\n");
1082 prom_printf("... done\n");
1084 call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"),
1085 phb_node
, -1, minsize
,
1086 (u32
) base
, (u32
) (base
>> 32));
1087 call_prom("close", 1, 0, phb_node
);
1090 reserve_mem(local_alloc_bottom
, local_alloc_top
- local_alloc_bottom
);
1092 if (RELOC(prom_memory_limit
)) {
1094 * We align the start to a 16MB boundary so we can map the TCE area
1095 * using large pages if possible. The end should be the top of RAM
1096 * so no need to align it.
1098 RELOC(prom_tce_alloc_start
) = _ALIGN_DOWN(local_alloc_bottom
, 0x1000000);
1099 RELOC(prom_tce_alloc_end
) = local_alloc_top
;
1102 /* Flag the first invalid entry */
1103 prom_debug("ending prom_initialize_tce_table\n");
1107 * With CHRP SMP we need to use the OF to start the other
1108 * processors so we can't wait until smp_boot_cpus (the OF is
1109 * trashed by then) so we have to put the processors into
1110 * a holding pattern controlled by the kernel (not OF) before
1111 * we destroy the OF.
1113 * This uses a chunk of low memory, puts some holding pattern
1114 * code there and sends the other processors off to there until
1115 * smp_boot_cpus tells them to do something. The holding pattern
1116 * checks that address until its cpu # is there, when it is that
1117 * cpu jumps to __secondary_start(). smp_boot_cpus() takes care
1118 * of setting those values.
1120 * We also use physical address 0x4 here to tell when a cpu
1121 * is in its holding pattern code.
1123 * Fixup comment... DRENG / PPPBBB - Peter
1127 static void __init
prom_hold_cpus(void)
1132 unsigned long offset
= reloc_offset();
1135 unsigned int interrupt_server
[MAX_CPU_THREADS
];
1136 unsigned int cpu_threads
, hw_cpu_num
;
1138 extern void __secondary_hold(void);
1139 extern unsigned long __secondary_hold_spinloop
;
1140 extern unsigned long __secondary_hold_acknowledge
;
1141 unsigned long *spinloop
1142 = (void *)virt_to_abs(&__secondary_hold_spinloop
);
1143 unsigned long *acknowledge
1144 = (void *)virt_to_abs(&__secondary_hold_acknowledge
);
1145 unsigned long secondary_hold
1146 = virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold
));
1147 struct prom_t
*_prom
= PTRRELOC(&prom
);
1149 prom_debug("prom_hold_cpus: start...\n");
1150 prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop
);
1151 prom_debug(" 1) *spinloop = 0x%x\n", *spinloop
);
1152 prom_debug(" 1) acknowledge = 0x%x\n",
1153 (unsigned long)acknowledge
);
1154 prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge
);
1155 prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold
);
1157 /* Set the common spinloop variable, so all of the secondary cpus
1158 * will block when they are awakened from their OF spinloop.
1159 * This must occur for both SMP and non SMP kernels, since OF will
1160 * be trashed when we move the kernel.
1165 for (i
=0; i
< NR_CPUS
; i
++) {
1166 RELOC(hmt_thread_data
)[i
].pir
= 0xdeadbeef;
1170 for (node
= 0; prom_next_node(&node
); ) {
1172 prom_getprop(node
, "device_type", type
, sizeof(type
));
1173 if (strcmp(type
, RELOC("cpu")) != 0)
1176 /* Skip non-configured cpus. */
1177 if (prom_getprop(node
, "status", type
, sizeof(type
)) > 0)
1178 if (strcmp(type
, RELOC("okay")) != 0)
1182 prom_getprop(node
, "reg", ®
, sizeof(reg
));
1184 prom_debug("\ncpuid = 0x%x\n", cpuid
);
1185 prom_debug("cpu hw idx = 0x%x\n", reg
);
1187 /* Init the acknowledge var which will be reset by
1188 * the secondary cpu when it awakens from its OF
1191 *acknowledge
= (unsigned long)-1;
1193 propsize
= prom_getprop(node
, "ibm,ppc-interrupt-server#s",
1195 sizeof(interrupt_server
));
1197 /* no property. old hardware has no SMT */
1199 interrupt_server
[0] = reg
; /* fake it with phys id */
1201 /* We have a threaded processor */
1202 cpu_threads
= propsize
/ sizeof(u32
);
1203 if (cpu_threads
> MAX_CPU_THREADS
) {
1204 prom_printf("SMT: too many threads!\n"
1205 "SMT: found %x, max is %x\n",
1206 cpu_threads
, MAX_CPU_THREADS
);
1207 cpu_threads
= 1; /* ToDo: panic? */
1211 hw_cpu_num
= interrupt_server
[0];
1212 if (hw_cpu_num
!= _prom
->cpu
) {
1213 /* Primary Thread of non-boot cpu */
1214 prom_printf("%x : starting cpu hw idx %x... ", cpuid
, reg
);
1215 call_prom("start-cpu", 3, 0, node
,
1216 secondary_hold
, reg
);
1218 for ( i
= 0 ; (i
< 100000000) &&
1219 (*acknowledge
== ((unsigned long)-1)); i
++ )
1222 if (*acknowledge
== reg
) {
1223 prom_printf("done\n");
1224 /* We have to get every CPU out of OF,
1225 * even if we never start it. */
1226 if (cpuid
>= NR_CPUS
)
1229 prom_printf("failed: %x\n", *acknowledge
);
1234 prom_printf("%x : boot cpu %x\n", cpuid
, reg
);
1238 /* Init paca for secondary threads. They start later. */
1239 for (i
=1; i
< cpu_threads
; i
++) {
1241 if (cpuid
>= NR_CPUS
)
1244 #endif /* CONFIG_SMP */
1248 /* Only enable HMT on processors that provide support. */
1249 if (__is_processor(PV_PULSAR
) ||
1250 __is_processor(PV_ICESTAR
) ||
1251 __is_processor(PV_SSTAR
)) {
1252 prom_printf(" starting secondary threads\n");
1254 for (i
= 0; i
< NR_CPUS
; i
+= 2) {
1259 unsigned long pir
= mfspr(SPRN_PIR
);
1260 if (__is_processor(PV_PULSAR
)) {
1261 RELOC(hmt_thread_data
)[i
].pir
=
1264 RELOC(hmt_thread_data
)[i
].pir
=
1270 prom_printf("Processor is not HMT capable\n");
1274 if (cpuid
> NR_CPUS
)
1275 prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS
)
1276 ") exceeded: ignoring extras\n");
1278 prom_debug("prom_hold_cpus: end...\n");
1282 static void __init
prom_init_client_services(unsigned long pp
)
1284 unsigned long offset
= reloc_offset();
1285 struct prom_t
*_prom
= PTRRELOC(&prom
);
1287 /* Get a handle to the prom entry point before anything else */
1290 /* Init default value for phys size */
1291 _prom
->root_size_cells
= 1;
1292 _prom
->root_addr_cells
= 2;
1294 /* get a handle for the stdout device */
1295 _prom
->chosen
= call_prom("finddevice", 1, 1, ADDR("/chosen"));
1296 if (!PHANDLE_VALID(_prom
->chosen
))
1297 prom_panic("cannot find chosen"); /* msg won't be printed :( */
1299 /* get device tree root */
1300 _prom
->root
= call_prom("finddevice", 1, 1, ADDR("/"));
1301 if (!PHANDLE_VALID(_prom
->root
))
1302 prom_panic("cannot find device tree root"); /* msg won't be printed :( */
1305 static void __init
prom_init_stdout(void)
1307 unsigned long offset
= reloc_offset();
1308 struct prom_t
*_prom
= PTRRELOC(&prom
);
1309 char *path
= RELOC(of_stdout_device
);
1313 if (prom_getprop(_prom
->chosen
, "stdout", &val
, sizeof(val
)) <= 0)
1314 prom_panic("cannot find stdout");
1316 _prom
->stdout
= val
;
1318 /* Get the full OF pathname of the stdout device */
1319 memset(path
, 0, 256);
1320 call_prom("instance-to-path", 3, 1, _prom
->stdout
, path
, 255);
1321 val
= call_prom("instance-to-package", 1, 1, _prom
->stdout
);
1322 prom_setprop(_prom
->chosen
, "linux,stdout-package", &val
, sizeof(val
));
1323 prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device
));
1324 prom_setprop(_prom
->chosen
, "linux,stdout-path",
1325 RELOC(of_stdout_device
), strlen(RELOC(of_stdout_device
))+1);
1327 /* If it's a display, note it */
1328 memset(type
, 0, sizeof(type
));
1329 prom_getprop(val
, "device_type", type
, sizeof(type
));
1330 if (strcmp(type
, RELOC("display")) == 0) {
1331 _prom
->disp_node
= val
;
1332 prom_setprop(val
, "linux,boot-display", NULL
, 0);
1336 static void __init
prom_close_stdin(void)
1338 unsigned long offset
= reloc_offset();
1339 struct prom_t
*_prom
= PTRRELOC(&prom
);
1342 if (prom_getprop(_prom
->chosen
, "stdin", &val
, sizeof(val
)) > 0)
1343 call_prom("close", 1, 0, val
);
1346 static int __init
prom_find_machine_type(void)
1348 unsigned long offset
= reloc_offset();
1349 struct prom_t
*_prom
= PTRRELOC(&prom
);
1354 len
= prom_getprop(_prom
->root
, "compatible",
1355 compat
, sizeof(compat
)-1);
1359 char *p
= &compat
[i
];
1363 if (strstr(p
, RELOC("Power Macintosh")) ||
1364 strstr(p
, RELOC("MacRISC4")))
1365 return PLATFORM_POWERMAC
;
1366 if (strstr(p
, RELOC("Momentum,Maple")))
1367 return PLATFORM_MAPLE
;
1371 /* Default to pSeries. We need to know if we are running LPAR */
1372 rtas
= call_prom("finddevice", 1, 1, ADDR("/rtas"));
1373 if (PHANDLE_VALID(rtas
)) {
1374 int x
= prom_getproplen(rtas
, "ibm,hypertas-functions");
1375 if (x
!= PROM_ERROR
) {
1376 prom_printf("Hypertas detected, assuming LPAR !\n");
1377 return PLATFORM_PSERIES_LPAR
;
1380 return PLATFORM_PSERIES
;
1383 static int __init
prom_set_color(ihandle ih
, int i
, int r
, int g
, int b
)
1385 unsigned long offset
= reloc_offset();
1387 return call_prom("call-method", 6, 1, ADDR("color!"), ih
, i
, b
, g
, r
);
1391 * If we have a display that we don't know how to drive,
1392 * we will want to try to execute OF's open method for it
1393 * later. However, OF will probably fall over if we do that
1394 * we've taken over the MMU.
1395 * So we check whether we will need to open the display,
1396 * and if so, open it now.
1398 static void __init
prom_check_displays(void)
1400 unsigned long offset
= reloc_offset();
1401 struct prom_t
*_prom
= PTRRELOC(&prom
);
1402 char type
[16], *path
;
1407 static unsigned char default_colors
[] = {
1425 const unsigned char *clut
;
1427 prom_printf("Looking for displays\n");
1428 for (node
= 0; prom_next_node(&node
); ) {
1429 memset(type
, 0, sizeof(type
));
1430 prom_getprop(node
, "device_type", type
, sizeof(type
));
1431 if (strcmp(type
, RELOC("display")) != 0)
1434 /* It seems OF doesn't null-terminate the path :-( */
1435 path
= RELOC(prom_scratch
);
1436 memset(path
, 0, PROM_SCRATCH_SIZE
);
1439 * leave some room at the end of the path for appending extra
1442 if (call_prom("package-to-path", 3, 1, node
, path
,
1443 PROM_SCRATCH_SIZE
-10) == PROM_ERROR
)
1445 prom_printf("found display : %s, opening ... ", path
);
1447 ih
= call_prom("open", 1, 1, path
);
1449 prom_printf("failed\n");
1454 prom_printf("done\n");
1455 prom_setprop(node
, "linux,opened", NULL
, 0);
1458 * stdout wasn't a display node, pick the first we can find
1461 if (_prom
->disp_node
== 0)
1462 _prom
->disp_node
= node
;
1464 /* Setup a useable color table when the appropriate
1465 * method is available. Should update this to set-colors */
1466 clut
= RELOC(default_colors
);
1467 for (i
= 0; i
< 32; i
++, clut
+= 3)
1468 if (prom_set_color(ih
, i
, clut
[0], clut
[1],
1472 #ifdef CONFIG_LOGO_LINUX_CLUT224
1473 clut
= PTRRELOC(RELOC(logo_linux_clut224
.clut
));
1474 for (i
= 0; i
< RELOC(logo_linux_clut224
.clutsize
); i
++, clut
+= 3)
1475 if (prom_set_color(ih
, i
+ 32, clut
[0], clut
[1],
1478 #endif /* CONFIG_LOGO_LINUX_CLUT224 */
1483 /* Return (relocated) pointer to this much memory: moves initrd if reqd. */
1484 static void __init
*make_room(unsigned long *mem_start
, unsigned long *mem_end
,
1485 unsigned long needed
, unsigned long align
)
1487 unsigned long offset
= reloc_offset();
1490 *mem_start
= _ALIGN(*mem_start
, align
);
1491 while ((*mem_start
+ needed
) > *mem_end
) {
1492 unsigned long room
, chunk
;
1494 prom_debug("Chunk exhausted, claiming more at %x...\n",
1495 RELOC(alloc_bottom
));
1496 room
= RELOC(alloc_top
) - RELOC(alloc_bottom
);
1497 if (room
> DEVTREE_CHUNK_SIZE
)
1498 room
= DEVTREE_CHUNK_SIZE
;
1499 if (room
< PAGE_SIZE
)
1500 prom_panic("No memory for flatten_device_tree (no room)");
1501 chunk
= alloc_up(room
, 0);
1503 prom_panic("No memory for flatten_device_tree (claim failed)");
1504 *mem_end
= RELOC(alloc_top
);
1507 ret
= (void *)*mem_start
;
1508 *mem_start
+= needed
;
1513 #define dt_push_token(token, mem_start, mem_end) \
1514 do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0)
1516 static unsigned long __init
dt_find_string(char *str
)
1518 unsigned long offset
= reloc_offset();
1521 s
= os
= (char *)RELOC(dt_string_start
);
1523 while (s
< (char *)RELOC(dt_string_end
)) {
1524 if (strcmp(s
, str
) == 0)
1532 * The Open Firmware 1275 specification states properties must be 31 bytes or
1533 * less, however not all firmwares obey this. Make it 64 bytes to be safe.
1535 #define MAX_PROPERTY_NAME 64
1537 static void __init
scan_dt_build_strings(phandle node
,
1538 unsigned long *mem_start
,
1539 unsigned long *mem_end
)
1541 unsigned long offset
= reloc_offset();
1542 char *prev_name
, *namep
, *sstart
;
1546 sstart
= (char *)RELOC(dt_string_start
);
1548 /* get and store all property names */
1549 prev_name
= RELOC("");
1551 /* 64 is max len of name including nul. */
1552 namep
= make_room(mem_start
, mem_end
, MAX_PROPERTY_NAME
, 1);
1553 if (call_prom("nextprop", 3, 1, node
, prev_name
, namep
) != 1) {
1554 /* No more nodes: unwind alloc */
1555 *mem_start
= (unsigned long)namep
;
1560 if (strcmp(namep
, RELOC("name")) == 0) {
1561 *mem_start
= (unsigned long)namep
;
1562 prev_name
= RELOC("name");
1565 /* get/create string entry */
1566 soff
= dt_find_string(namep
);
1568 *mem_start
= (unsigned long)namep
;
1569 namep
= sstart
+ soff
;
1571 /* Trim off some if we can */
1572 *mem_start
= (unsigned long)namep
+ strlen(namep
) + 1;
1573 RELOC(dt_string_end
) = *mem_start
;
1578 /* do all our children */
1579 child
= call_prom("child", 1, 1, node
);
1580 while (child
!= 0) {
1581 scan_dt_build_strings(child
, mem_start
, mem_end
);
1582 child
= call_prom("peer", 1, 1, child
);
1586 static void __init
scan_dt_build_struct(phandle node
, unsigned long *mem_start
,
1587 unsigned long *mem_end
)
1590 char *namep
, *prev_name
, *sstart
, *p
, *ep
, *lp
, *path
;
1592 unsigned char *valp
;
1593 unsigned long offset
= reloc_offset();
1594 static char pname
[MAX_PROPERTY_NAME
];
1597 dt_push_token(OF_DT_BEGIN_NODE
, mem_start
, mem_end
);
1599 /* get the node's full name */
1600 namep
= (char *)*mem_start
;
1601 l
= call_prom("package-to-path", 3, 1, node
,
1602 namep
, *mem_end
- *mem_start
);
1604 /* Didn't fit? Get more room. */
1605 if ((l
+1) > (*mem_end
- *mem_start
)) {
1606 namep
= make_room(mem_start
, mem_end
, l
+1, 1);
1607 call_prom("package-to-path", 3, 1, node
, namep
, l
);
1611 /* Fixup an Apple bug where they have bogus \0 chars in the
1612 * middle of the path in some properties
1614 for (p
= namep
, ep
= namep
+ l
; p
< ep
; p
++)
1616 memmove(p
, p
+1, ep
- p
);
1620 /* now try to extract the unit name in that mess */
1621 for (p
= namep
, lp
= NULL
; *p
; p
++)
1625 memmove(namep
, lp
, strlen(lp
) + 1);
1626 *mem_start
= _ALIGN(((unsigned long) namep
) +
1627 strlen(namep
) + 1, 4);
1630 /* get it again for debugging */
1631 path
= RELOC(prom_scratch
);
1632 memset(path
, 0, PROM_SCRATCH_SIZE
);
1633 call_prom("package-to-path", 3, 1, node
, path
, PROM_SCRATCH_SIZE
-1);
1635 /* get and store all properties */
1636 prev_name
= RELOC("");
1637 sstart
= (char *)RELOC(dt_string_start
);
1639 if (call_prom("nextprop", 3, 1, node
, prev_name
,
1644 if (strcmp(RELOC(pname
), RELOC("name")) == 0) {
1645 prev_name
= RELOC("name");
1649 /* find string offset */
1650 soff
= dt_find_string(RELOC(pname
));
1652 prom_printf("WARNING: Can't find string index for"
1653 " <%s>, node %s\n", RELOC(pname
), path
);
1656 prev_name
= sstart
+ soff
;
1659 l
= call_prom("getproplen", 2, 1, node
, RELOC(pname
));
1662 if (l
== PROM_ERROR
)
1664 if (l
> MAX_PROPERTY_LENGTH
) {
1665 prom_printf("WARNING: ignoring large property ");
1666 /* It seems OF doesn't null-terminate the path :-( */
1667 prom_printf("[%s] ", path
);
1668 prom_printf("%s length 0x%x\n", RELOC(pname
), l
);
1672 /* push property head */
1673 dt_push_token(OF_DT_PROP
, mem_start
, mem_end
);
1674 dt_push_token(l
, mem_start
, mem_end
);
1675 dt_push_token(soff
, mem_start
, mem_end
);
1677 /* push property content */
1678 valp
= make_room(mem_start
, mem_end
, l
, 4);
1679 call_prom("getprop", 4, 1, node
, RELOC(pname
), valp
, l
);
1680 *mem_start
= _ALIGN(*mem_start
, 4);
1683 /* Add a "linux,phandle" property. */
1684 soff
= dt_find_string(RELOC("linux,phandle"));
1686 prom_printf("WARNING: Can't find string index for"
1687 " <linux-phandle> node %s\n", path
);
1689 dt_push_token(OF_DT_PROP
, mem_start
, mem_end
);
1690 dt_push_token(4, mem_start
, mem_end
);
1691 dt_push_token(soff
, mem_start
, mem_end
);
1692 valp
= make_room(mem_start
, mem_end
, 4, 4);
1693 *(u32
*)valp
= node
;
1696 /* do all our children */
1697 child
= call_prom("child", 1, 1, node
);
1698 while (child
!= 0) {
1699 scan_dt_build_struct(child
, mem_start
, mem_end
);
1700 child
= call_prom("peer", 1, 1, child
);
1703 dt_push_token(OF_DT_END_NODE
, mem_start
, mem_end
);
1706 static void __init
flatten_device_tree(void)
1709 unsigned long offset
= reloc_offset();
1710 unsigned long mem_start
, mem_end
, room
;
1711 struct boot_param_header
*hdr
;
1712 struct prom_t
*_prom
= PTRRELOC(&prom
);
1717 * Check how much room we have between alloc top & bottom (+/- a
1718 * few pages), crop to 4Mb, as this is our "chuck" size
1720 room
= RELOC(alloc_top
) - RELOC(alloc_bottom
) - 0x4000;
1721 if (room
> DEVTREE_CHUNK_SIZE
)
1722 room
= DEVTREE_CHUNK_SIZE
;
1723 prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom
));
1725 /* Now try to claim that */
1726 mem_start
= (unsigned long)alloc_up(room
, PAGE_SIZE
);
1728 prom_panic("Can't allocate initial device-tree chunk\n");
1729 mem_end
= RELOC(alloc_top
);
1731 /* Get root of tree */
1732 root
= call_prom("peer", 1, 1, (phandle
)0);
1733 if (root
== (phandle
)0)
1734 prom_panic ("couldn't get device tree root\n");
1736 /* Build header and make room for mem rsv map */
1737 mem_start
= _ALIGN(mem_start
, 4);
1738 hdr
= make_room(&mem_start
, &mem_end
,
1739 sizeof(struct boot_param_header
), 4);
1740 RELOC(dt_header_start
) = (unsigned long)hdr
;
1741 rsvmap
= make_room(&mem_start
, &mem_end
, sizeof(mem_reserve_map
), 8);
1743 /* Start of strings */
1744 mem_start
= PAGE_ALIGN(mem_start
);
1745 RELOC(dt_string_start
) = mem_start
;
1746 mem_start
+= 4; /* hole */
1748 /* Add "linux,phandle" in there, we'll need it */
1749 namep
= make_room(&mem_start
, &mem_end
, 16, 1);
1750 strcpy(namep
, RELOC("linux,phandle"));
1751 mem_start
= (unsigned long)namep
+ strlen(namep
) + 1;
1753 /* Build string array */
1754 prom_printf("Building dt strings...\n");
1755 scan_dt_build_strings(root
, &mem_start
, &mem_end
);
1756 RELOC(dt_string_end
) = mem_start
;
1758 /* Build structure */
1759 mem_start
= PAGE_ALIGN(mem_start
);
1760 RELOC(dt_struct_start
) = mem_start
;
1761 prom_printf("Building dt structure...\n");
1762 scan_dt_build_struct(root
, &mem_start
, &mem_end
);
1763 dt_push_token(OF_DT_END
, &mem_start
, &mem_end
);
1764 RELOC(dt_struct_end
) = PAGE_ALIGN(mem_start
);
1767 hdr
->boot_cpuid_phys
= _prom
->cpu
;
1768 hdr
->magic
= OF_DT_HEADER
;
1769 hdr
->totalsize
= RELOC(dt_struct_end
) - RELOC(dt_header_start
);
1770 hdr
->off_dt_struct
= RELOC(dt_struct_start
) - RELOC(dt_header_start
);
1771 hdr
->off_dt_strings
= RELOC(dt_string_start
) - RELOC(dt_header_start
);
1772 hdr
->dt_strings_size
= RELOC(dt_string_end
) - RELOC(dt_string_start
);
1773 hdr
->off_mem_rsvmap
= ((unsigned long)rsvmap
) - RELOC(dt_header_start
);
1774 hdr
->version
= OF_DT_VERSION
;
1775 /* Version 16 is not backward compatible */
1776 hdr
->last_comp_version
= 0x10;
1778 /* Reserve the whole thing and copy the reserve map in, we
1779 * also bump mem_reserve_cnt to cause further reservations to
1780 * fail since it's too late.
1782 reserve_mem(RELOC(dt_header_start
), hdr
->totalsize
);
1783 memcpy(rsvmap
, RELOC(mem_reserve_map
), sizeof(mem_reserve_map
));
1788 prom_printf("reserved memory map:\n");
1789 for (i
= 0; i
< RELOC(mem_reserve_cnt
); i
++)
1790 prom_printf(" %x - %x\n", RELOC(mem_reserve_map
)[i
].base
,
1791 RELOC(mem_reserve_map
)[i
].size
);
1794 RELOC(mem_reserve_cnt
) = MEM_RESERVE_MAP_SIZE
;
1796 prom_printf("Device tree strings 0x%x -> 0x%x\n",
1797 RELOC(dt_string_start
), RELOC(dt_string_end
));
1798 prom_printf("Device tree struct 0x%x -> 0x%x\n",
1799 RELOC(dt_struct_start
), RELOC(dt_struct_end
));
1804 static void __init
fixup_device_tree(void)
1806 unsigned long offset
= reloc_offset();
1807 phandle u3
, i2c
, mpic
;
1812 /* Some G5s have a missing interrupt definition, fix it up here */
1813 u3
= call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
1814 if (!PHANDLE_VALID(u3
))
1816 i2c
= call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
1817 if (!PHANDLE_VALID(i2c
))
1819 mpic
= call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
1820 if (!PHANDLE_VALID(mpic
))
1823 /* check if proper rev of u3 */
1824 if (prom_getprop(u3
, "device-rev", &u3_rev
, sizeof(u3_rev
))
1827 if (u3_rev
!= 0x35 && u3_rev
!= 0x37)
1829 /* does it need fixup ? */
1830 if (prom_getproplen(i2c
, "interrupts") > 0)
1833 prom_printf("fixing up bogus interrupts for u3 i2c...\n");
1835 /* interrupt on this revision of u3 is number 0 and level */
1838 prom_setprop(i2c
, "interrupts", &interrupts
, sizeof(interrupts
));
1840 prom_setprop(i2c
, "interrupt-parent", &parent
, sizeof(parent
));
1844 static void __init
prom_find_boot_cpu(void)
1846 unsigned long offset
= reloc_offset();
1847 struct prom_t
*_prom
= PTRRELOC(&prom
);
1852 if (prom_getprop(_prom
->chosen
, "cpu", &prom_cpu
, sizeof(prom_cpu
)) <= 0)
1853 prom_panic("cannot find boot cpu");
1855 cpu_pkg
= call_prom("instance-to-package", 1, 1, prom_cpu
);
1857 prom_getprop(cpu_pkg
, "reg", &getprop_rval
, sizeof(getprop_rval
));
1858 _prom
->cpu
= getprop_rval
;
1860 prom_debug("Booting CPU hw index = 0x%x\n", _prom
->cpu
);
1863 static void __init
prom_check_initrd(unsigned long r3
, unsigned long r4
)
1865 #ifdef CONFIG_BLK_DEV_INITRD
1866 unsigned long offset
= reloc_offset();
1867 struct prom_t
*_prom
= PTRRELOC(&prom
);
1869 if ( r3
&& r4
&& r4
!= 0xdeadbeef) {
1872 RELOC(prom_initrd_start
) = (r3
>= KERNELBASE
) ? __pa(r3
) : r3
;
1873 RELOC(prom_initrd_end
) = RELOC(prom_initrd_start
) + r4
;
1875 val
= (u64
)RELOC(prom_initrd_start
);
1876 prom_setprop(_prom
->chosen
, "linux,initrd-start", &val
, sizeof(val
));
1877 val
= (u64
)RELOC(prom_initrd_end
);
1878 prom_setprop(_prom
->chosen
, "linux,initrd-end", &val
, sizeof(val
));
1880 reserve_mem(RELOC(prom_initrd_start
),
1881 RELOC(prom_initrd_end
) - RELOC(prom_initrd_start
));
1883 prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start
));
1884 prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end
));
1886 #endif /* CONFIG_BLK_DEV_INITRD */
1890 * We enter here early on, when the Open Firmware prom is still
1891 * handling exceptions and the MMU hash table for us.
1894 unsigned long __init
prom_init(unsigned long r3
, unsigned long r4
, unsigned long pp
,
1895 unsigned long r6
, unsigned long r7
)
1897 unsigned long offset
= reloc_offset();
1898 struct prom_t
*_prom
= PTRRELOC(&prom
);
1899 unsigned long phys
= KERNELBASE
- offset
;
1903 * First zero the BSS
1905 memset(PTRRELOC(&__bss_start
), 0, __bss_stop
- __bss_start
);
1908 * Init interface to Open Firmware, get some node references,
1911 prom_init_client_services(pp
);
1914 * Init prom stdout device
1917 prom_debug("klimit=0x%x\n", RELOC(klimit
));
1918 prom_debug("offset=0x%x\n", offset
);
1921 * Check for an initrd
1923 prom_check_initrd(r3
, r4
);
1926 * Get default machine type. At this point, we do not differenciate
1927 * between pSeries SMP and pSeries LPAR
1929 RELOC(of_platform
) = prom_find_machine_type();
1930 getprop_rval
= RELOC(of_platform
);
1931 prom_setprop(_prom
->chosen
, "linux,platform",
1932 &getprop_rval
, sizeof(getprop_rval
));
1935 * On pSeries, inform the firmware about our capabilities
1937 if (RELOC(of_platform
) & PLATFORM_PSERIES
)
1938 prom_send_capabilities();
1941 * On pSeries and Cell, copy the CPU hold code
1943 if (RELOC(of_platform
) & (PLATFORM_PSERIES
| PLATFORM_CELL
))
1944 copy_and_flush(0, KERNELBASE
- offset
, 0x100, 0);
1947 * Get memory cells format
1950 prom_getprop(_prom
->root
, "#size-cells",
1951 &getprop_rval
, sizeof(getprop_rval
));
1952 _prom
->root_size_cells
= getprop_rval
;
1954 prom_getprop(_prom
->root
, "#address-cells",
1955 &getprop_rval
, sizeof(getprop_rval
));
1956 _prom
->root_addr_cells
= getprop_rval
;
1959 * Do early parsing of command line
1961 early_cmdline_parse();
1964 * Initialize memory management within prom_init
1969 * Determine which cpu is actually running right _now_
1971 prom_find_boot_cpu();
1974 * Initialize display devices
1976 prom_check_displays();
1979 * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
1980 * that uses the allocator, we need to make sure we get the top of memory
1981 * available for us here...
1983 if (RELOC(of_platform
) == PLATFORM_PSERIES
)
1984 prom_initialize_tce_table();
1987 * On non-powermacs, try to instantiate RTAS and puts all CPUs
1988 * in spin-loops. PowerMacs don't have a working RTAS and use
1989 * a different way to spin CPUs
1991 if (RELOC(of_platform
) != PLATFORM_POWERMAC
) {
1992 prom_instantiate_rtas();
1997 * Fill in some infos for use by the kernel later on
1999 if (RELOC(ppc64_iommu_off
))
2000 prom_setprop(_prom
->chosen
, "linux,iommu-off", NULL
, 0);
2002 if (RELOC(iommu_force_on
))
2003 prom_setprop(_prom
->chosen
, "linux,iommu-force-on", NULL
, 0);
2005 if (RELOC(prom_memory_limit
))
2006 prom_setprop(_prom
->chosen
, "linux,memory-limit",
2007 PTRRELOC(&prom_memory_limit
), sizeof(RELOC(prom_memory_limit
)));
2009 if (RELOC(prom_tce_alloc_start
)) {
2010 prom_setprop(_prom
->chosen
, "linux,tce-alloc-start",
2011 PTRRELOC(&prom_tce_alloc_start
), sizeof(RELOC(prom_tce_alloc_start
)));
2012 prom_setprop(_prom
->chosen
, "linux,tce-alloc-end",
2013 PTRRELOC(&prom_tce_alloc_end
), sizeof(RELOC(prom_tce_alloc_end
)));
2017 * Fixup any known bugs in the device-tree
2019 fixup_device_tree();
2022 * Now finally create the flattened device-tree
2024 prom_printf("copying OF device tree ...\n");
2025 flatten_device_tree();
2027 /* in case stdin is USB and still active on IBM machines... */
2031 * Call OF "quiesce" method to shut down pending DMA's from
2034 prom_printf("Calling quiesce ...\n");
2035 call_prom("quiesce", 0, 0);
2038 * And finally, call the kernel passing it the flattened device
2039 * tree and NULL as r5, thus triggering the new entry point which
2040 * is common to us and kexec
2042 prom_printf("returning from prom_init\n");
2043 prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start
));
2044 prom_debug("->phys=0x%x\n", phys
);
2046 __start(RELOC(dt_header_start
), phys
, 0);