drivers/ata/pata_pcmcia.c

   1 /*
   2  *   pata_pcmcia.c - PCMCIA PATA controller driver.
   3  *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
   4  *   PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
   5  *                                              <openembedded@hrw.one.pl>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2, or (at your option)
  10  *  any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; see the file COPYING.  If not, write to
  19  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  20  *
  21  *   Heavily based upon ide-cs.c
  22  *   The initial developer of the original code is David A. Hinds
  23  *   <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  24  *   are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  25  */
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/blkdev.h>
  31 #include <linux/delay.h>
  32 #include <scsi/scsi_host.h>
  33 #include <linux/ata.h>
  34 #include <linux/libata.h>
  35
  36 #include <pcmcia/cs_types.h>
  37 #include <pcmcia/cs.h>
  38 #include <pcmcia/cistpl.h>
  39 #include <pcmcia/ds.h>
  40 #include <pcmcia/cisreg.h>
  41 #include <pcmcia/ciscode.h>
  42
  43
  44 #define DRV_NAME "pata_pcmcia"
  45 #define DRV_VERSION "0.3.3"
  46
  47 /*
  48  *      Private data structure to glue stuff together
  49  */
  50
  51 struct ata_pcmcia_info {
  52         struct pcmcia_device *pdev;
  53         int             ndev;
  54         dev_node_t      node;
  55 };
  56
  57 /**
  58  *      pcmcia_set_mode -       PCMCIA specific mode setup
  59  *      @link: link
  60  *      @r_failed_dev: Return pointer for failed device
  61  *
  62  *      Perform the tuning and setup of the devices and timings, which
  63  *      for PCMCIA is the same as any other controller. We wrap it however
  64  *      as we need to spot hardware with incorrect or missing master/slave
  65  *      decode, which alas is embarrassingly common in the PC world
  66  */
  67
  68 static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
  69 {
  70         struct ata_device *master = &link->device[0];
  71         struct ata_device *slave = &link->device[1];
  72
  73         if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
  74                 return ata_do_set_mode(link, r_failed_dev);
  75
  76         if (memcmp(master->id + ATA_ID_FW_REV,  slave->id + ATA_ID_FW_REV,
  77                            ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) {
  78                 /* Suspicious match, but could be two cards from
  79                    the same vendor - check serial */
  80                 if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
  81                            ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
  82                         ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
  83                         ata_dev_disable(slave);
  84                 }
  85         }
  86         return ata_do_set_mode(link, r_failed_dev);
  87 }
  88
  89 /**
  90  *      pcmcia_set_mode_8bit    -       PCMCIA specific mode setup
  91  *      @link: link
  92  *      @r_failed_dev: Return pointer for failed device
  93  *
  94  *      For the simple emulated 8bit stuff the less we do the better.
  95  */
  96
  97 static int pcmcia_set_mode_8bit(struct ata_link *link,
  98                                 struct ata_device **r_failed_dev)
  99 {
 100         return 0;
 101 }
 102
 103 /**
 104  *      ata_data_xfer_8bit       -      Transfer data by 8bit PIO
 105  *      @dev: device to target
 106  *      @buf: data buffer
 107  *      @buflen: buffer length
 108  *      @rw: read/write
 109  *
 110  *      Transfer data from/to the device data register by 8 bit PIO.
 111  *
 112  *      LOCKING:
 113  *      Inherited from caller.
 114  */
 115
 116 static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
 117                                 unsigned char *buf, unsigned int buflen, int rw)
 118 {
 119         struct ata_port *ap = dev->link->ap;
 120
 121         if (rw == READ)
 122                 ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
 123         else
 124                 iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
 125
 126         return buflen;
 127 }
 128
 129
 130 static struct scsi_host_template pcmcia_sht = {
 131         ATA_PIO_SHT(DRV_NAME),
 132 };
 133
 134 static struct ata_port_operations pcmcia_port_ops = {
 135         .inherits       = &ata_sff_port_ops,
 136         .sff_data_xfer  = ata_sff_data_xfer_noirq,
 137         .cable_detect   = ata_cable_40wire,
 138         .set_mode       = pcmcia_set_mode,
 139 };
 140
 141 static struct ata_port_operations pcmcia_8bit_port_ops = {
 142         .inherits       = &ata_sff_port_ops,
 143         .sff_data_xfer  = ata_data_xfer_8bit,
 144         .cable_detect   = ata_cable_40wire,
 145         .set_mode       = pcmcia_set_mode_8bit,
 146 };
 147
 148 #define CS_CHECK(fn, ret) \
 149 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 150
 151
 152 struct pcmcia_config_check {
 153         unsigned long ctl_base;
 154         int skip_vcc;
 155         int is_kme;
 156 };
 157
 158 static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 159                                    cistpl_cftable_entry_t *cfg,
 160                                    cistpl_cftable_entry_t *dflt,
 161                                    unsigned int vcc,
 162                                    void *priv_data)
 163 {
 164         struct pcmcia_config_check *stk = priv_data;
 165
 166         /* Check for matching Vcc, unless we're desperate */
 167         if (!stk->skip_vcc) {
 168                 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 169                         if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
 170                                 return -ENODEV;
 171                 } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 172                         if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
 173                                 return -ENODEV;
 174                 }
 175         }
 176
 177         if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 178                 pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 179         else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 180                 pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 181
 182         if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 183                 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 184                 pdev->io.BasePort1 = io->win[0].base;
 185                 pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 186                 if (!(io->flags & CISTPL_IO_16BIT))
 187                         pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 188                 if (io->nwin == 2) {
 189                         pdev->io.NumPorts1 = 8;
 190                         pdev->io.BasePort2 = io->win[1].base;
 191                         pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
 192                         if (pcmcia_request_io(pdev, &pdev->io) != 0)
 193                                 return -ENODEV;
 194                         stk->ctl_base = pdev->io.BasePort2;
 195                 } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
 196                         pdev->io.NumPorts1 = io->win[0].len;
 197                         pdev->io.NumPorts2 = 0;
 198                         if (pcmcia_request_io(pdev, &pdev->io) != 0)
 199                                 return -ENODEV;
 200                         stk->ctl_base = pdev->io.BasePort1 + 0x0e;
 201                 } else
 202                         return -ENODEV;
 203                 /* If we've got this far, we're done */
 204                 return 0;
 205         }
 206         return -ENODEV;
 207 }
 208
 209 /**
 210  *      pcmcia_init_one         -       attach a PCMCIA interface
 211  *      @pdev: pcmcia device
 212  *
 213  *      Register a PCMCIA IDE interface. Such interfaces are PIO 0 and
 214  *      shared IRQ.
 215  */
 216
 217 static int pcmcia_init_one(struct pcmcia_device *pdev)
 218 {
 219         struct ata_host *host;
 220         struct ata_port *ap;
 221         struct ata_pcmcia_info *info;
 222         struct pcmcia_config_check *stk = NULL;
 223         int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
 224         unsigned long io_base, ctl_base;
 225         void __iomem *io_addr, *ctl_addr;
 226         int n_ports = 1;
 227         struct ata_port_operations *ops = &pcmcia_port_ops;
 228
 229         info = kzalloc(sizeof(*info), GFP_KERNEL);
 230         if (info == NULL)
 231                 return -ENOMEM;
 232
 233         /* Glue stuff together. FIXME: We may be able to get rid of info with care */
 234         info->pdev = pdev;
 235         pdev->priv = info;
 236
 237         /* Set up attributes in order to probe card and get resources */
 238         pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 239         pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 240         pdev->io.IOAddrLines = 3;
 241         pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 242         pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 243         pdev->conf.Attributes = CONF_ENABLE_IRQ;
 244         pdev->conf.IntType = INT_MEMORY_AND_IO;
 245
 246         /* See if we have a manufacturer identifier. Use it to set is_kme for
 247            vendor quirks */
 248         is_kme = ((pdev->manf_id == MANFID_KME) &&
 249                   ((pdev->card_id == PRODID_KME_KXLC005_A) ||
 250                    (pdev->card_id == PRODID_KME_KXLC005_B)));
 251
 252         /* Allocate resoure probing structures */
 253
 254         stk = kzalloc(sizeof(*stk), GFP_KERNEL);
 255         if (!stk)
 256                 goto out1;
 257         stk->is_kme = is_kme;
 258         stk->skip_vcc = io_base = ctl_base = 0;
 259
 260         if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
 261                 stk->skip_vcc = 1;
 262                 if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
 263                         goto failed; /* No suitable config found */
 264         }
 265         io_base = pdev->io.BasePort1;
 266         ctl_base = stk->ctl_base;
 267         CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
 268         CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
 269
 270         /* iomap */
 271         ret = -ENOMEM;
 272         io_addr = devm_ioport_map(&pdev->dev, io_base, 8);
 273         ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1);
 274         if (!io_addr || !ctl_addr)
 275                 goto failed;
 276
 277         /* Success. Disable the IRQ nIEN line, do quirks */
 278         iowrite8(0x02, ctl_addr);
 279         if (is_kme)
 280                 iowrite8(0x81, ctl_addr + 0x01);
 281
 282         /* FIXME: Could be more ports at base + 0x10 but we only deal with
 283            one right now */
 284         if (pdev->io.NumPorts1 >= 0x20)
 285                 n_ports = 2;
 286
 287         if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
 288                 ops = &pcmcia_8bit_port_ops;
 289         /*
 290          *      Having done the PCMCIA plumbing the ATA side is relatively
 291          *      sane.
 292          */
 293         ret = -ENOMEM;
 294         host = ata_host_alloc(&pdev->dev, n_ports);
 295         if (!host)
 296                 goto failed;
 297
 298         for (p = 0; p < n_ports; p++) {
 299                 ap = host->ports[p];
 300
 301                 ap->ops = ops;
 302                 ap->pio_mask = 1;               /* ISA so PIO 0 cycles */
 303                 ap->flags |= ATA_FLAG_SLAVE_POSS;
 304                 ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
 305                 ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
 306                 ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
 307                 ata_sff_std_ports(&ap->ioaddr);
 308
 309                 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
 310         }
 311
 312         /* activate */
 313         ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
 314                                 IRQF_SHARED, &pcmcia_sht);
 315         if (ret)
 316                 goto failed;
 317
 318         info->ndev = 1;
 319         kfree(stk);
 320         return 0;
 321
 322 cs_failed:
 323         cs_error(pdev, last_fn, last_ret);
 324 failed:
 325         kfree(stk);
 326         info->ndev = 0;
 327         pcmcia_disable_device(pdev);
 328 out1:
 329         kfree(info);
 330         return ret;
 331 }
 332
 333 /**
 334  *      pcmcia_remove_one       -       unplug an pcmcia interface
 335  *      @pdev: pcmcia device
 336  *
 337  *      A PCMCIA ATA device has been unplugged. Perform the needed
 338  *      cleanup. Also called on module unload for any active devices.
 339  */
 340
 341 static void pcmcia_remove_one(struct pcmcia_device *pdev)
 342 {
 343         struct ata_pcmcia_info *info = pdev->priv;
 344         struct device *dev = &pdev->dev;
 345
 346         if (info != NULL) {
 347                 /* If we have attached the device to the ATA layer, detach it */
 348                 if (info->ndev) {
 349                         struct ata_host *host = dev_get_drvdata(dev);
 350                         ata_host_detach(host);
 351                 }
 352                 info->ndev = 0;
 353                 pdev->priv = NULL;
 354         }
 355         pcmcia_disable_device(pdev);
 356         kfree(info);
 357 }
 358
 359 static struct pcmcia_device_id pcmcia_devices[] = {
 360         PCMCIA_DEVICE_FUNC_ID(4),
 361         PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),        /* Corsair */
 362         PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),        /* Hitachi */
 363         PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),        /* I-O Data CFA */
 364         PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),        /* Mitsubishi CFA */
 365         PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
 366         PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
 367         PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),        /* SanDisk CFA */
 368         PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000),        /* Kingston */
 369         PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620),        /* TI emulated */
 370         PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),        /* Toshiba */
 371         PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 372         PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),        /* Samsung */
 373         PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),        /* Hitachi */
 374         PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
 375         PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),        /* Viking CFA */
 376         PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),        /* Lexar, Viking CFA */
 377         PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
 378         PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
 379         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 380         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 381         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
 382         PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 383         PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 384         PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
 385         PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
 386         PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
 387         PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
 388         PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 389         PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 390         PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
 391         PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 392         PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 393         PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 394         PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 395         PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 396         PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 397         PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 398         PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
 399         PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
 400         PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
 401         PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 402         PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
 403         PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
 404         PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
 405         PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
 406         PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
 407         PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
 408         PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 409         PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
 410         PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
 411         PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 412         PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 413         PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
 414         PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 415         PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
 416         PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
 417         PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
 418         PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
 419         PCMCIA_DEVICE_NULL,
 420 };
 421
 422 MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices);
 423
 424 static struct pcmcia_driver pcmcia_driver = {
 425         .owner          = THIS_MODULE,
 426         .drv = {
 427                 .name           = DRV_NAME,
 428         },
 429         .id_table       = pcmcia_devices,
 430         .probe          = pcmcia_init_one,
 431         .remove         = pcmcia_remove_one,
 432 };
 433
 434 static int __init pcmcia_init(void)
 435 {
 436         return pcmcia_register_driver(&pcmcia_driver);
 437 }
 438
 439 static void __exit pcmcia_exit(void)
 440 {
 441         pcmcia_unregister_driver(&pcmcia_driver);
 442 }
 443
 444 MODULE_AUTHOR("Alan Cox");
 445 MODULE_DESCRIPTION("low-level driver for PCMCIA ATA");
 446 MODULE_LICENSE("GPL");
 447 MODULE_VERSION(DRV_VERSION);
 448
 449 module_init(pcmcia_init);
 450 module_exit(pcmcia_exit);