Staging: rtxxx0: remove superfluous RT30xx ifdefs

[linux-2.6/mini2440.git] / drivers / staging / rt2860 / rtmp_def.h

/*
 *************************************************************************
 * Ralink Tech Inc.
 * 5F., No.36, Taiyuan St., Jhubei City,
 * Hsinchu County 302,
 * Taiwan, R.O.C.
 *
 * (c) Copyright 2002-2007, Ralink Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify  *
 * it under the terms of the GNU General Public License as published by  *
 * the Free Software Foundation; either version 2 of the License, or     *
 * (at your option) any later version.                                   *
 *                                                                       *
 * This program is distributed in the hope that it will be useful,       *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 * GNU General Public License for more details.                          *
 *                                                                       *
 * You should have received a copy of the GNU General Public License     *
 * along with this program; if not, write to the                         *
 * Free Software Foundation, Inc.,                                       *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                       *
 *************************************************************************

    Module Name:
    rtmp_def.h

    Abstract:
    Miniport related definition header

    Revision History:
    Who         When          What
    --------    ----------    ----------------------------------------------
    Paul Lin    08-01-2002    created
    John Chang  08-05-2003    add definition for 11g & other drafts
*/
#ifndef __RTMP_DEF_H__
#define __RTMP_DEF_H__

#include "oid.h"

//
//  Debug information verbosity: lower values indicate higher urgency
//
#define RT_DEBUG_OFF        0
#define RT_DEBUG_ERROR      1
#define RT_DEBUG_WARN       2
#define RT_DEBUG_TRACE      3
#define RT_DEBUG_INFO       4
#define RT_DEBUG_LOUD       5

#define NIC_TAG             ((ULONG)'0682')
#define NIC_DBG_STRING      ("**RT28xx**")

#define RALINK_2883_VERSION             ((UINT32)0x28830300)
#define RALINK_2880E_VERSION    ((UINT32)0x28720200)
#define RALINK_3070_VERSION             ((UINT32)0x30700200)

//
// NDIS version in use by the NIC driver.
// The high byte is the major version. The low byte is the minor version.
//
#ifdef  NDIS51_MINIPORT
#define NIC_DRIVER_VERSION      0x0501
#else
#define NIC_DRIVER_VERSION      0x0500
#endif

//
// NDIS media type, current is ethernet, change if native wireless supported
//
#define NIC_MEDIA_TYPE          NdisMedium802_3
#define NIC_PCI_HDR_LENGTH      0xe2
#define NIC_MAX_PACKET_SIZE     2304
#define NIC_HEADER_SIZE         14
#define MAX_MAP_REGISTERS_NEEDED 32
#define MIN_MAP_REGISTERS_NEEDED 2   //Todo: should consider fragment issue.

//
// interface type, we use PCI
//
#define NIC_INTERFACE_TYPE      NdisInterfacePci
#define NIC_INTERRUPT_MODE      NdisInterruptLevelSensitive

//
// buffer size passed in NdisMQueryAdapterResources
// We should only need three adapter resources (IO, interrupt and memory),
// Some devices get extra resources, so have room for 10 resources
//                    UF_SIZE   (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))


#define NIC_RESOURCE_B//
// IO space length
//
#define NIC_MAP_IOSPACE_LENGTH  sizeof(CSR_STRUC)

#define MAX_RX_PKT_LEN  1520

//
// Entry number for each DMA descriptor ring
//

#ifdef RT2860
#define TX_RING_SIZE            64 //64
#define MGMT_RING_SIZE          128
#define RX_RING_SIZE            128 //64
#define MAX_TX_PROCESS          TX_RING_SIZE //8
#define MAX_DMA_DONE_PROCESS    TX_RING_SIZE
#define MAX_TX_DONE_PROCESS     TX_RING_SIZE //8
#define LOCAL_TXBUF_SIZE        2
#endif
#ifdef RT2870
#define TX_RING_SIZE            8 // 1
#define PRIO_RING_SIZE          8
#define MGMT_RING_SIZE       32 // PRIO_RING_SIZE
#define RX_RING_SIZE            8
#define MAX_TX_PROCESS          4
#define LOCAL_TXBUF_SIZE        2048
#endif // RT2870 //

#define MAX_RX_PROCESS          128 //64 //32
#define NUM_OF_LOCAL_TXBUF      2
#define TXD_SIZE                16
#define TXWI_SIZE               16
#define RXD_SIZE                16
#define RXWI_SIZE               16
// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
#define TX_DMA_1ST_BUFFER_SIZE  96    // only the 1st physical buffer is pre-allocated
#define MGMT_DMA_BUFFER_SIZE    1536 //2048
#define RX_BUFFER_AGGRESIZE     3840 //3904 //3968 //4096 //2048 //4096
#define RX_BUFFER_NORMSIZE      3840 //3904 //3968 //4096 //2048 //4096
#define TX_BUFFER_NORMSIZE              RX_BUFFER_NORMSIZE
#define MAX_FRAME_SIZE          2346                    // Maximum 802.11 frame size
#define MAX_AGGREGATION_SIZE    3840 //3904 //3968 //4096
#define MAX_NUM_OF_TUPLE_CACHE  2
#define MAX_MCAST_LIST_SIZE     32
#define MAX_LEN_OF_VENDOR_DESC  64
//#define MAX_SIZE_OF_MCAST_PSQ   (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
#define MAX_SIZE_OF_MCAST_PSQ               32

#define MAX_RX_PROCESS_CNT      (RX_RING_SIZE)


#define MAX_PACKETS_IN_QUEUE                            (512) //(512)    // to pass WMM A5-WPAPSK
#define MAX_PACKETS_IN_MCAST_PS_QUEUE           32
#define MAX_PACKETS_IN_PS_QUEUE                         128     //32
#define WMM_NUM_OF_AC                       4  /* AC0, AC1, AC2, and AC3 */

#define MAX_EEPROM_BIN_FILE_SIZE                                        1024

// RxFilter
#define STANORMAL        0x17f97
#define APNORMAL         0x15f97
//
//  RTMP_ADAPTER flags
//
#define fRTMP_ADAPTER_MAP_REGISTER          0x00000001
#define fRTMP_ADAPTER_INTERRUPT_IN_USE      0x00000002
#define fRTMP_ADAPTER_HARDWARE_ERROR        0x00000004
#define fRTMP_ADAPTER_SCATTER_GATHER        0x00000008
#define fRTMP_ADAPTER_SEND_PACKET_ERROR     0x00000010
#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
#define fRTMP_ADAPTER_HALT_IN_PROGRESS      0x00000040
#define fRTMP_ADAPTER_RESET_IN_PROGRESS     0x00000080
#define fRTMP_ADAPTER_NIC_NOT_EXIST         0x00000100
#define fRTMP_ADAPTER_TX_RING_ALLOCATED     0x00000200
#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS    0x00000400
#define fRTMP_ADAPTER_MIMORATE_INUSED       0x00000800
#define fRTMP_ADAPTER_RX_RING_ALLOCATED     0x00001000
#define fRTMP_ADAPTER_INTERRUPT_ACTIVE      0x00002000
#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS  0x00004000
#define fRTMP_ADAPTER_REASSOC_IN_PROGRESS       0x00008000
#define fRTMP_ADAPTER_MEDIA_STATE_PENDING       0x00010000
#define fRTMP_ADAPTER_RADIO_OFF                         0x00020000
#define fRTMP_ADAPTER_BULKOUT_RESET                     0x00040000
#define fRTMP_ADAPTER_BULKIN_RESET                      0x00080000
#define fRTMP_ADAPTER_RDG_ACTIVE                        0x00100000
#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
#define fRTMP_ADAPTER_SCAN_2040                         0x04000000
#define fRTMP_ADAPTER_RADIO_MEASUREMENT         0x08000000

#define fRTMP_ADAPTER_START_UP                  0x10000000      //Devive already initialized and enabled Tx/Rx.
#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE    0x20000000
#define fRTMP_ADAPTER_IDLE_RADIO_OFF        0x40000000

//
//  STA operation status flags
//
#define fOP_STATUS_INFRA_ON                 0x00000001
#define fOP_STATUS_ADHOC_ON                 0x00000002
#define fOP_STATUS_BG_PROTECTION_INUSED     0x00000004
#define fOP_STATUS_SHORT_SLOT_INUSED        0x00000008
#define fOP_STATUS_SHORT_PREAMBLE_INUSED    0x00000010
#define fOP_STATUS_RECEIVE_DTIM             0x00000020
#define fOP_STATUS_MEDIA_STATE_CONNECTED    0x00000080
#define fOP_STATUS_WMM_INUSED               0x00000100
#define fOP_STATUS_AGGREGATION_INUSED       0x00000200
#define fOP_STATUS_DOZE                     0x00000400  // debug purpose
#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800  // piggy-back, and aggregation
#define fOP_STATUS_APSD_INUSED                          0x00001000
#define fOP_STATUS_TX_AMSDU_INUSED                      0x00002000
#define fOP_STATUS_MAX_RETRY_ENABLED            0x00004000
#define fOP_STATUS_WAKEUP_NOW               0x00008000
#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE       0x00020000

#ifdef RT2860
//
//  RTMP_ADAPTER PSFlags : related to advanced power save.
//
// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up
#define fRTMP_PS_CAN_GO_SLEEP          0x00000001
// Indicate whether driver has issue a LinkControl command to PCIe L1
#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND          0x00000002
// Indicate driver should disable kick off hardware to send packets from now.
#define fRTMP_PS_DISABLE_TX         0x00000004
// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which  doesn't indicate unicate nor multicast packets for me
//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
#define fRTMP_PS_GO_TO_SLEEP_NOW         0x00000008
#endif

#define CCKSETPROTECT           0x1
#define OFDMSETPROTECT          0x2
#define MM20SETPROTECT          0x4
#define MM40SETPROTECT          0x8
#define GF20SETPROTECT          0x10
#define GR40SETPROTECT          0x20
#define ALLN_SETPROTECT         (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)

//
//  AP's client table operation status flags
//
#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001  // CLIENT can parse QOS DATA frame
#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002  // CLIENT can receive Ralink's proprietary TX aggregation frame
#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004  // CLIENT support piggy-back
#define fCLIENT_STATUS_AMSDU_INUSED                     0x00000008
#define fCLIENT_STATUS_SGI20_CAPABLE            0x00000010
#define fCLIENT_STATUS_SGI40_CAPABLE            0x00000020
#define fCLIENT_STATUS_TxSTBC_CAPABLE           0x00000040
#define fCLIENT_STATUS_RxSTBC_CAPABLE           0x00000080
#define fCLIENT_STATUS_HTC_CAPABLE                      0x00000100
#define fCLIENT_STATUS_RDG_CAPABLE                      0x00000200
#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE  0x00000400
#define fCLIENT_STATUS_APSD_CAPABLE         0x00000800  /* UAPSD STATION */

#define fCLIENT_STATUS_RALINK_CHIPSET           0x00100000
//
//  STA configuration flags
//

// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
#define HT_NO_PROTECT   0
#define HT_LEGACY_PROTECT       1
#define HT_40_PROTECT   2
#define HT_2040_PROTECT 3
#define HT_RTSCTS_6M    7
//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
#define HT_ATHEROS      8       // rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
#define HT_FORCERTSCTS  9       // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.

//
// RX Packet Filter control flags. Apply on pAd->PacketFilter
//
#define fRX_FILTER_ACCEPT_DIRECT            NDIS_PACKET_TYPE_DIRECTED
#define fRX_FILTER_ACCEPT_MULTICAST         NDIS_PACKET_TYPE_MULTICAST
#define fRX_FILTER_ACCEPT_BROADCAST         NDIS_PACKET_TYPE_BROADCAST
#define fRX_FILTER_ACCEPT_ALL_MULTICAST     NDIS_PACKET_TYPE_ALL_MULTICAST

//
// Error code section
//
// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
#define ERRLOG_READ_PCI_SLOT_FAILED     0x00000101L
#define ERRLOG_WRITE_PCI_SLOT_FAILED    0x00000102L
#define ERRLOG_VENDOR_DEVICE_NOMATCH    0x00000103L

// NDIS_ERROR_CODE_ADAPTER_DISABLED
#define ERRLOG_BUS_MASTER_DISABLED      0x00000201L

// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
#define ERRLOG_INVALID_SPEED_DUPLEX     0x00000301L
#define ERRLOG_SET_SECONDARY_FAILED     0x00000302L

// NDIS_ERROR_CODE_OUT_OF_RESOURCES
#define ERRLOG_OUT_OF_MEMORY            0x00000401L
#define ERRLOG_OUT_OF_SHARED_MEMORY     0x00000402L
#define ERRLOG_OUT_OF_MAP_REGISTERS     0x00000403L
#define ERRLOG_OUT_OF_BUFFER_POOL       0x00000404L
#define ERRLOG_OUT_OF_NDIS_BUFFER       0x00000405L
#define ERRLOG_OUT_OF_PACKET_POOL       0x00000406L
#define ERRLOG_OUT_OF_NDIS_PACKET       0x00000407L
#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY  0x00000408L

// NDIS_ERROR_CODE_HARDWARE_FAILURE
#define ERRLOG_SELFTEST_FAILED          0x00000501L
#define ERRLOG_INITIALIZE_ADAPTER       0x00000502L
#define ERRLOG_REMOVE_MINIPORT          0x00000503L

// NDIS_ERROR_CODE_RESOURCE_CONFLICT
#define ERRLOG_MAP_IO_SPACE             0x00000601L
#define ERRLOG_QUERY_ADAPTER_RESOURCES  0x00000602L
#define ERRLOG_NO_IO_RESOURCE           0x00000603L
#define ERRLOG_NO_INTERRUPT_RESOURCE    0x00000604L
#define ERRLOG_NO_MEMORY_RESOURCE       0x00000605L


// WDS definition
#define MAX_WDS_ENTRY               4
#define WDS_PAIRWISE_KEY_OFFSET     60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table

#define WDS_DISABLE_MODE            0
#define WDS_RESTRICT_MODE           1
#define WDS_BRIDGE_MODE             2
#define WDS_REPEATER_MODE           3
#define WDS_LAZY_MODE               4


#define MAX_MESH_NUM                            0

#define MAX_APCLI_NUM                           0

#define MAX_MBSSID_NUM                          1
#if defined(RT2860) || defined(RT30xx)
#ifdef MBSS_SUPPORT
#undef  MAX_MBSSID_NUM
#define MAX_MBSSID_NUM                          (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
#endif // MBSS_SUPPORT //
#endif

/* sanity check for apidx */
#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
    { if (apidx > MAX_MBSSID_NUM) { \
          printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \
          apidx = MAIN_MBSSID; } }

#define VALID_WCID(_wcid)       ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )

#define MAIN_MBSSID                 0
#define FIRST_MBSSID                1


#define MAX_BEACON_SIZE                         512
// If the MAX_MBSSID_NUM is larger than 6,
// it shall reserve some WCID space(wcid 222~253) for beacon frames.
// -    these wcid 238~253 are reserved for beacon#6(ra6).
// -    these wcid 222~237 are reserved for beacon#7(ra7).
#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
#define HW_RESERVED_WCID        222
#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
#define HW_RESERVED_WCID        238
#else
#define HW_RESERVED_WCID        255
#endif

// Then dedicate wcid of DFS and Carrier-Sense.
#define DFS_CTS_WCID            (HW_RESERVED_WCID - 1)
#define CS_CTS_WCID             (HW_RESERVED_WCID - 2)
#define LAST_SPECIFIC_WCID      (HW_RESERVED_WCID - 2)

// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
#define MAX_AVAILABLE_CLIENT_WCID       (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)

// TX need WCID to find Cipher Key
// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
#define GET_GroupKey_WCID(__wcid, __bssidx) \
        {                                                                               \
                __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx;      \
        }

#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))


// definition to support multiple BSSID
#define BSS0                            0
#define BSS1                            1
#define BSS2                            2
#define BSS3                            3
#define BSS4                            4
#define BSS5                            5
#define BSS6                            6
#define BSS7                            7


//============================================================
// Length definitions
#define PEER_KEY_NO                     2
#define MAC_ADDR_LEN                    6
#define TIMESTAMP_LEN                   8
#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
#define MAX_LEN_OF_KEY                  32      // 32 octets == 256 bits, Redefine for WPA
#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
#define MAX_NUM_OF_11JCHANNELS             20      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
#define MAX_LEN_OF_SSID                 32
#define CIPHER_TEXT_LEN                 128
#define HASH_TABLE_SIZE                 256
#define MAX_VIE_LEN                     1024   // New for WPA cipher suite variable IE sizes.
#define MAX_SUPPORT_MCS             32

//============================================================
// ASIC WCID Table definition.
//============================================================
#define BSSID_WCID              1       // in infra mode, always put bssid with this WCID
#define MCAST_WCID      0x0
#define BSS0Mcast_WCID  0x0
#define BSS1Mcast_WCID  0xf8
#define BSS2Mcast_WCID  0xf9
#define BSS3Mcast_WCID  0xfa
#define BSS4Mcast_WCID  0xfb
#define BSS5Mcast_WCID  0xfc
#define BSS6Mcast_WCID  0xfd
#define BSS7Mcast_WCID  0xfe
#define RESERVED_WCID           0xff

#define MAX_NUM_OF_ACL_LIST                             MAX_NUMBER_OF_ACL

#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211

#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
#endif

#define MAX_NUM_OF_WDS_LINK_PERBSSID                3
#define MAX_NUM_OF_WDS_LINK                 (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
#define MAX_NUM_OF_EVENT                MAX_NUMBER_OF_EVENT
#define WDS_LINK_START_WCID                             (MAX_LEN_OF_MAC_TABLE-1)

#define NUM_OF_TID                      8
#define MAX_AID_BA                    4
#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)        //Block ACK recipient
#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
#define MAX_LEN_OF_BSS_TABLE             64
#define MAX_REORDERING_MPDU_NUM                  512

// key related definitions
#define SHARE_KEY_NUM                   4
#define MAX_LEN_OF_SHARE_KEY            16    // byte count
#define MAX_LEN_OF_PEER_KEY             16    // byte count
#define PAIRWISE_KEY_NUM                64    // in MAC ASIC pairwise key table
#define GROUP_KEY_NUM                   4
#define PMK_LEN                         32
#define WDS_PAIRWISE_KEY_OFFSET         60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
#define PMKID_NO                        4     // Number of PMKID saved supported
#define MAX_LEN_OF_MLME_BUFFER          2048

// power status related definitions
#define PWR_ACTIVE                      0
#define PWR_SAVE                        1
#define PWR_MMPS                        2                       //MIMO power save

// Auth and Assoc mode related definitions
#define AUTH_MODE_OPEN                  0x00
#define AUTH_MODE_KEY                   0x01

// BSS Type definitions
#define BSS_ADHOC                       0  // = Ndis802_11IBSS
#define BSS_INFRA                       1  // = Ndis802_11Infrastructure
#define BSS_ANY                         2  // = Ndis802_11AutoUnknown
#define BSS_MONITOR                                 3  // = Ndis802_11Monitor


// Reason code definitions
#define REASON_RESERVED                 0
#define REASON_UNSPECIFY                1
#define REASON_NO_LONGER_VALID          2
#define REASON_DEAUTH_STA_LEAVING       3
#define REASON_DISASSOC_INACTIVE        4
#define REASON_DISASSPC_AP_UNABLE       5
#define REASON_CLS2ERR                  6
#define REASON_CLS3ERR                  7
#define REASON_DISASSOC_STA_LEAVING     8
#define REASON_STA_REQ_ASSOC_NOT_AUTH   9
#define REASON_INVALID_IE               13
#define REASON_MIC_FAILURE              14
#define REASON_4_WAY_TIMEOUT            15
#define REASON_GROUP_KEY_HS_TIMEOUT     16
#define REASON_IE_DIFFERENT             17
#define REASON_MCIPHER_NOT_VALID        18
#define REASON_UCIPHER_NOT_VALID        19
#define REASON_AKMP_NOT_VALID           20
#define REASON_UNSUPPORT_RSNE_VER       21
#define REASON_INVALID_RSNE_CAP         22
#define REASON_8021X_AUTH_FAIL          23
#define REASON_CIPHER_SUITE_REJECTED    24
#define REASON_DECLINED                 37

#define REASON_QOS_UNSPECIFY              32
#define REASON_QOS_LACK_BANDWIDTH         33
#define REASON_POOR_CHANNEL_CONDITION     34
#define REASON_QOS_OUTSIDE_TXOP_LIMITION  35
#define REASON_QOS_QSTA_LEAVING_QBSS      36
#define REASON_QOS_UNWANTED_MECHANISM     37
#define REASON_QOS_MECH_SETUP_REQUIRED    38
#define REASON_QOS_REQUEST_TIMEOUT        39
#define REASON_QOS_CIPHER_NOT_SUPPORT     45

// Status code definitions
#define MLME_SUCCESS                    0
#define MLME_UNSPECIFY_FAIL             1
#define MLME_CANNOT_SUPPORT_CAP         10
#define MLME_REASSOC_DENY_ASSOC_EXIST   11
#define MLME_ASSOC_DENY_OUT_SCOPE       12
#define MLME_ALG_NOT_SUPPORT            13
#define MLME_SEQ_NR_OUT_OF_SEQUENCE     14
#define MLME_REJ_CHALLENGE_FAILURE      15
#define MLME_REJ_TIMEOUT                  16
#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA  17
#define MLME_ASSOC_REJ_DATA_RATE          18

#define MLME_ASSOC_REJ_NO_EXT_RATE        22
#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC   23
#define MLME_ASSOC_REJ_NO_CCK_OFDM        24

#define MLME_QOS_UNSPECIFY                32
#define MLME_REQUEST_DECLINED             37
#define MLME_REQUEST_WITH_INVALID_PARAM   38
#define MLME_DLS_NOT_ALLOW_IN_QBSS        48
#define MLME_DEST_STA_NOT_IN_QBSS         49
#define MLME_DEST_STA_IS_NOT_A_QSTA       50

#define MLME_INVALID_FORMAT             0x51
#define MLME_FAIL_NO_RESOURCE           0x52
#define MLME_STATE_MACHINE_REJECT       0x53
#define MLME_MAC_TABLE_FAIL             0x54

// IE code
#define IE_SSID                         0
#define IE_SUPP_RATES                   1
#define IE_FH_PARM                      2
#define IE_DS_PARM                      3
#define IE_CF_PARM                      4
#define IE_TIM                          5
#define IE_IBSS_PARM                    6
#define IE_COUNTRY                      7     // 802.11d
#define IE_802_11D_REQUEST              10    // 802.11d
#define IE_QBSS_LOAD                    11    // 802.11e d9
#define IE_EDCA_PARAMETER               12    // 802.11e d9
#define IE_TSPEC                        13    // 802.11e d9
#define IE_TCLAS                        14    // 802.11e d9
#define IE_SCHEDULE                     15    // 802.11e d9
#define IE_CHALLENGE_TEXT               16
#define IE_POWER_CONSTRAINT             32    // 802.11h d3.3
#define IE_POWER_CAPABILITY             33    // 802.11h d3.3
#define IE_TPC_REQUEST                  34    // 802.11h d3.3
#define IE_TPC_REPORT                   35    // 802.11h d3.3
#define IE_SUPP_CHANNELS                36    // 802.11h d3.3
#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37    // 802.11h d3.3
#define IE_MEASUREMENT_REQUEST          38    // 802.11h d3.3
#define IE_MEASUREMENT_REPORT           39    // 802.11h d3.3
#define IE_QUIET                        40    // 802.11h d3.3
#define IE_IBSS_DFS                     41    // 802.11h d3.3
#define IE_ERP                          42    // 802.11g
#define IE_TS_DELAY                     43    // 802.11e d9
#define IE_TCLAS_PROCESSING             44    // 802.11e d9
#define IE_QOS_CAPABILITY               46    // 802.11e d6
#define IE_HT_CAP                       45    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
#define IE_AP_CHANNEL_REPORT                    51    // 802.11k d6
#define IE_HT_CAP2                         52    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
#define IE_RSN                          48    // 802.11i d3.0
#define IE_WPA2                         48    // WPA2
#define IE_EXT_SUPP_RATES               50    // 802.11g
#define IE_SUPP_REG_CLASS               59    // 802.11y. Supported regulatory classes.
#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT      60      // 802.11n
#define IE_ADD_HT                         61    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
#define IE_ADD_HT2                        53    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD


// For 802.11n D3.03
//#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
#define IE_SECONDARY_CH_OFFSET          62      // 802.11n D3.03        Secondary Channel Offset element
#ifdef RT2870
#define IE_WAPI                                                 68              // WAPI information element
#endif
#define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
#define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
#define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03
#define IE_EXT_CAPABILITY                127   // 802.11n D3.03


#define IE_WPA                          221   // WPA
#define IE_VENDOR_SPECIFIC              221   // Wifi WMM (WME)

#define OUI_BROADCOM_HT              51   //
#define OUI_BROADCOM_HTADD              52   //
#define OUI_PREN_HT_CAP              51   //
#define OUI_PREN_ADD_HT              52   //

// CCX information
#define IE_AIRONET_CKIP                 133   // CCX1.0 ID 85H for CKIP
#define IE_AP_TX_POWER                  150   // CCX 2.0 for AP transmit power
#define IE_MEASUREMENT_CAPABILITY       221   // CCX 2.0
#define IE_CCX_V2                       221
#define IE_AIRONET_IPADDRESS            149   // CCX ID 95H for IP Address
#define IE_AIRONET_CCKMREASSOC          156   // CCX ID 9CH for CCKM Reassociation Request element
#define CKIP_NEGOTIATION_LENGTH         30
#define AIRONET_IPADDRESS_LENGTH        10
#define AIRONET_CCKMREASSOC_LENGTH      24

// ========================================================
// MLME state machine definition
// ========================================================

// STA MLME state mahcines
#define ASSOC_STATE_MACHINE             1
#define AUTH_STATE_MACHINE              2
#define AUTH_RSP_STATE_MACHINE          3
#define SYNC_STATE_MACHINE              4
#define MLME_CNTL_STATE_MACHINE         5
#define WPA_PSK_STATE_MACHINE           6
#define LEAP_STATE_MACHINE              7
#define AIRONET_STATE_MACHINE           8
#define ACTION_STATE_MACHINE           9

// AP MLME state machines
#define AP_ASSOC_STATE_MACHINE          11
#define AP_AUTH_STATE_MACHINE           12
#define AP_AUTH_RSP_STATE_MACHINE       13
#define AP_SYNC_STATE_MACHINE           14
#define AP_CNTL_STATE_MACHINE           15
#define AP_WPA_STATE_MACHINE            16

//
// STA's CONTROL/CONNECT state machine: states, events, total function #
//
#define CNTL_IDLE                       0
#define CNTL_WAIT_DISASSOC              1
#define CNTL_WAIT_JOIN                  2
#define CNTL_WAIT_REASSOC               3
#define CNTL_WAIT_START                 4
#define CNTL_WAIT_AUTH                  5
#define CNTL_WAIT_ASSOC                 6
#define CNTL_WAIT_AUTH2                 7
#define CNTL_WAIT_OID_LIST_SCAN         8
#define CNTL_WAIT_OID_DISASSOC          9
#ifdef RT2870
#define CNTL_WAIT_SCAN_FOR_CONNECT      10
#endif // RT2870 //

#define MT2_ASSOC_CONF                  34
#define MT2_AUTH_CONF                   35
#define MT2_DEAUTH_CONF                 36
#define MT2_DISASSOC_CONF               37
#define MT2_REASSOC_CONF                38
#define MT2_PWR_MGMT_CONF               39
#define MT2_JOIN_CONF                   40
#define MT2_SCAN_CONF                   41
#define MT2_START_CONF                  42
#define MT2_GET_CONF                    43
#define MT2_SET_CONF                    44
#define MT2_RESET_CONF                  45
#define MT2_MLME_ROAMING_REQ            52

#define CNTL_FUNC_SIZE                  1

//
// STA's ASSOC state machine: states, events, total function #
//
#define ASSOC_IDLE                      0
#define ASSOC_WAIT_RSP                  1
#define REASSOC_WAIT_RSP                2
#define DISASSOC_WAIT_RSP               3
#define MAX_ASSOC_STATE                 4

#define ASSOC_MACHINE_BASE              0
#define MT2_MLME_ASSOC_REQ              0
#define MT2_MLME_REASSOC_REQ            1
#define MT2_MLME_DISASSOC_REQ           2
#define MT2_PEER_DISASSOC_REQ           3
#define MT2_PEER_ASSOC_REQ              4
#define MT2_PEER_ASSOC_RSP              5
#define MT2_PEER_REASSOC_REQ            6
#define MT2_PEER_REASSOC_RSP            7
#define MT2_DISASSOC_TIMEOUT            8
#define MT2_ASSOC_TIMEOUT               9
#define MT2_REASSOC_TIMEOUT             10
#define MAX_ASSOC_MSG                   11

#define ASSOC_FUNC_SIZE                 (MAX_ASSOC_STATE * MAX_ASSOC_MSG)

//
// ACT state machine: states, events, total function #
//
#define ACT_IDLE                      0
#define MAX_ACT_STATE                 1

#define ACT_MACHINE_BASE              0

//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
//Category
#define MT2_PEER_SPECTRUM_CATE              0
#define MT2_PEER_QOS_CATE              1
#define MT2_PEER_DLS_CATE             2
#define MT2_PEER_BA_CATE             3
#define MT2_PEER_PUBLIC_CATE             4
#define MT2_PEER_RM_CATE             5
#define MT2_PEER_HT_CATE             7  //      7.4.7
#define MAX_PEER_CATE_MSG                   7
#define MT2_MLME_ADD_BA_CATE             8
#define MT2_MLME_ORI_DELBA_CATE             9
#define MT2_MLME_REC_DELBA_CATE             10
#define MT2_MLME_QOS_CATE              11
#define MT2_MLME_DLS_CATE             12
#define MT2_ACT_INVALID             13
#define MAX_ACT_MSG                   14

//Category field
#define CATEGORY_SPECTRUM               0
#define CATEGORY_QOS                    1
#define CATEGORY_DLS                    2
#define CATEGORY_BA                     3
#define CATEGORY_PUBLIC         4
#define CATEGORY_RM                     5
#define CATEGORY_HT                     7


// DLS Action frame definition
#define ACTION_DLS_REQUEST                      0
#define ACTION_DLS_RESPONSE                     1
#define ACTION_DLS_TEARDOWN                     2

//Spectrum  Action field value 802.11h 7.4.1
#define SPEC_MRQ        0       // Request
#define SPEC_MRP        1       //Report
#define SPEC_TPCRQ      2
#define SPEC_TPCRP      3
#define SPEC_CHANNEL_SWITCH     4


//BA  Action field value
#define ADDBA_REQ       0
#define ADDBA_RESP      1
#define DELBA   2

//Public's  Action field value in Public Category.  Some in 802.11y and some in 11n
#define ACTION_BSS_2040_COEXIST                         0       // 11n
#define ACTION_DSE_ENABLEMENT                                   1       // 11y D9.0
#define ACTION_DSE_DEENABLEMENT                         2       // 11y D9.0
#define ACTION_DSE_REG_LOCATION_ANNOUNCE        3       // 11y D9.0
#define ACTION_EXT_CH_SWITCH_ANNOUNCE           4       // 11y D9.0
#define ACTION_DSE_MEASUREMENT_REQ                      5       // 11y D9.0
#define ACTION_DSE_MEASUREMENT_REPORT           6       // 11y D9.0
#define ACTION_MEASUREMENT_PILOT_ACTION         7       // 11y D9.0
#define ACTION_DSE_POWER_CONSTRAINT                     8       // 11y D9.0


//HT  Action field value
#define NOTIFY_BW_ACTION                                0
#define SMPS_ACTION                                             1
#define PSMP_ACTION                                     2
#define SETPCO_ACTION                                   3
#define MIMO_CHA_MEASURE_ACTION                 4
#define MIMO_N_BEACONFORM                               5
#define MIMO_BEACONFORM                                 6
#define ANTENNA_SELECT                                  7
#define HT_INFO_EXCHANGE                                8

#define ACT_FUNC_SIZE                 (MAX_ACT_STATE * MAX_ACT_MSG)
//
// STA's AUTHENTICATION state machine: states, evvents, total function #
//
#define AUTH_REQ_IDLE                   0
#define AUTH_WAIT_SEQ2                  1
#define AUTH_WAIT_SEQ4                  2
#define MAX_AUTH_STATE                  3

#define AUTH_MACHINE_BASE               0
#define MT2_MLME_AUTH_REQ               0
#define MT2_PEER_AUTH_EVEN              1
#define MT2_AUTH_TIMEOUT                2
#define MAX_AUTH_MSG                    3

#define AUTH_FUNC_SIZE                  (MAX_AUTH_STATE * MAX_AUTH_MSG)

//
// STA's AUTH_RSP state machine: states, events, total function #
//
#define AUTH_RSP_IDLE                   0
#define AUTH_RSP_WAIT_CHAL              1
#define MAX_AUTH_RSP_STATE              2

#define AUTH_RSP_MACHINE_BASE           0
#define MT2_AUTH_CHALLENGE_TIMEOUT      0
#define MT2_PEER_AUTH_ODD               1
#define MT2_PEER_DEAUTH                 2
#define MAX_AUTH_RSP_MSG                3

#define AUTH_RSP_FUNC_SIZE              (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)

//
// STA's SYNC state machine: states, events, total function #
//
#define SYNC_IDLE                       0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
#define JOIN_WAIT_BEACON                1
#define SCAN_LISTEN                     2
#define MAX_SYNC_STATE                  3

#define SYNC_MACHINE_BASE               0
#define MT2_MLME_SCAN_REQ               0
#define MT2_MLME_JOIN_REQ               1
#define MT2_MLME_START_REQ              2
#define MT2_PEER_BEACON                 3
#define MT2_PEER_PROBE_RSP              4
#define MT2_PEER_ATIM                   5
#define MT2_SCAN_TIMEOUT                6
#define MT2_BEACON_TIMEOUT              7
#define MT2_ATIM_TIMEOUT                8
#define MT2_PEER_PROBE_REQ              9
#define MAX_SYNC_MSG                    10

#define SYNC_FUNC_SIZE                  (MAX_SYNC_STATE * MAX_SYNC_MSG)

//Messages for the DLS state machine
#define DLS_IDLE                                                0
#define MAX_DLS_STATE                                   1

#define DLS_MACHINE_BASE                                0
#define MT2_MLME_DLS_REQ                            0
#define MT2_PEER_DLS_REQ                            1
#define MT2_PEER_DLS_RSP                            2
#define MT2_MLME_DLS_TEAR_DOWN              3
#define MT2_PEER_DLS_TEAR_DOWN              4
#define MAX_DLS_MSG                                     5

#define DLS_FUNC_SIZE                                   (MAX_DLS_STATE * MAX_DLS_MSG)

//
// STA's WPA-PSK State machine: states, events, total function #
//
#define WPA_PSK_IDLE                                    0
#define MAX_WPA_PSK_STATE                               1

#define WPA_MACHINE_BASE                0
#define MT2_EAPPacket                   0
#define MT2_EAPOLStart                  1
#define MT2_EAPOLLogoff                 2
#define MT2_EAPOLKey                    3
#define MT2_EAPOLASFAlert               4
#define MAX_WPA_PSK_MSG                 5

#define WPA_PSK_FUNC_SIZE                               (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)

//
// STA's CISCO-AIRONET State machine: states, events, total function #
//
#define AIRONET_IDLE                                    0
#define AIRONET_SCANNING                                1
#define MAX_AIRONET_STATE                               2

#define AIRONET_MACHINE_BASE                0
#define MT2_AIRONET_MSG                             0
#define MT2_AIRONET_SCAN_REQ                1
#define MT2_AIRONET_SCAN_DONE               2
#define MAX_AIRONET_MSG                             3

#define AIRONET_FUNC_SIZE                               (MAX_AIRONET_STATE * MAX_AIRONET_MSG)

//
// AP's CONTROL/CONNECT state machine: states, events, total function #
//
#define AP_CNTL_FUNC_SIZE               1

//
// AP's ASSOC state machine: states, events, total function #
//
#define AP_ASSOC_IDLE                   0
#define AP_MAX_ASSOC_STATE              1

#define AP_ASSOC_MACHINE_BASE           0
#define APMT2_MLME_DISASSOC_REQ         0
#define APMT2_PEER_DISASSOC_REQ         1
#define APMT2_PEER_ASSOC_REQ            2
#define APMT2_PEER_REASSOC_REQ          3
#define APMT2_CLS3ERR                   4
#define AP_MAX_ASSOC_MSG                5

#define AP_ASSOC_FUNC_SIZE              (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)

//
// AP's AUTHENTICATION state machine: states, events, total function #
//
#define AP_AUTH_REQ_IDLE                0
#define AP_MAX_AUTH_STATE               1

#define AP_AUTH_MACHINE_BASE            0
#define APMT2_MLME_DEAUTH_REQ           0
#define APMT2_CLS2ERR                   1
#define AP_MAX_AUTH_MSG                 2

#define AP_AUTH_FUNC_SIZE               (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)

//
// AP's AUTH-RSP state machine: states, events, total function #
//
#define AP_AUTH_RSP_IDLE                0
#define AP_MAX_AUTH_RSP_STATE           1

#define AP_AUTH_RSP_MACHINE_BASE        0
#define APMT2_AUTH_CHALLENGE_TIMEOUT    0
#define APMT2_PEER_AUTH_ODD             1
#define APMT2_PEER_DEAUTH               2
#define AP_MAX_AUTH_RSP_MSG             3

#define AP_AUTH_RSP_FUNC_SIZE           (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)

//
// AP's SYNC state machine: states, events, total function #
//
#define AP_SYNC_IDLE                    0
#define AP_SCAN_LISTEN                                  1
#define AP_MAX_SYNC_STATE               2

#define AP_SYNC_MACHINE_BASE            0
#define APMT2_PEER_PROBE_REQ            0
#define APMT2_PEER_BEACON               1
#define APMT2_MLME_SCAN_REQ                             2
#define APMT2_PEER_PROBE_RSP                    3
#define APMT2_SCAN_TIMEOUT                              4
#define APMT2_MLME_SCAN_CNCL                    5
#define AP_MAX_SYNC_MSG                 6

#define AP_SYNC_FUNC_SIZE               (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)

//
// AP's WPA state machine: states, events, total function #
//
#define AP_WPA_PTK                      0
#define AP_MAX_WPA_PTK_STATE            1

#define AP_WPA_MACHINE_BASE             0
#define APMT2_EAPPacket                 0
#define APMT2_EAPOLStart                1
#define APMT2_EAPOLLogoff               2
#define APMT2_EAPOLKey                  3
#define APMT2_EAPOLASFAlert             4
#define AP_MAX_WPA_MSG                  5

#define AP_WPA_FUNC_SIZE                (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)

// =============================================================================

// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
#define BTYPE_MGMT                  0
#define BTYPE_CNTL                  1
#define BTYPE_DATA                  2

// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
#define SUBTYPE_ASSOC_REQ           0
#define SUBTYPE_ASSOC_RSP           1
#define SUBTYPE_REASSOC_REQ         2
#define SUBTYPE_REASSOC_RSP         3
#define SUBTYPE_PROBE_REQ           4
#define SUBTYPE_PROBE_RSP           5
#define SUBTYPE_BEACON              8
#define SUBTYPE_ATIM                9
#define SUBTYPE_DISASSOC            10
#define SUBTYPE_AUTH                11
#define SUBTYPE_DEAUTH              12
#define SUBTYPE_ACTION              13
#define SUBTYPE_ACTION_NO_ACK              14

// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
#define SUBTYPE_WRAPPER         7
#define SUBTYPE_BLOCK_ACK_REQ       8
#define SUBTYPE_BLOCK_ACK           9
#define SUBTYPE_PS_POLL             10
#define SUBTYPE_RTS                 11
#define SUBTYPE_CTS                 12
#define SUBTYPE_ACK                 13
#define SUBTYPE_CFEND               14
#define SUBTYPE_CFEND_CFACK         15

// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
#define SUBTYPE_DATA                0
#define SUBTYPE_DATA_CFACK          1
#define SUBTYPE_DATA_CFPOLL         2
#define SUBTYPE_DATA_CFACK_CFPOLL   3
#define SUBTYPE_NULL_FUNC           4
#define SUBTYPE_CFACK               5
#define SUBTYPE_CFPOLL              6
#define SUBTYPE_CFACK_CFPOLL        7
#define SUBTYPE_QDATA               8
#define SUBTYPE_QDATA_CFACK         9
#define SUBTYPE_QDATA_CFPOLL        10
#define SUBTYPE_QDATA_CFACK_CFPOLL  11
#define SUBTYPE_QOS_NULL            12
#define SUBTYPE_QOS_CFACK           13
#define SUBTYPE_QOS_CFPOLL          14
#define SUBTYPE_QOS_CFACK_CFPOLL    15

// ACK policy of QOS Control field bit 6:5
#define NORMAL_ACK                  0x00  // b6:5 = 00
#define NO_ACK                      0x20  // b6:5 = 01
#define NO_EXPLICIT_ACK             0x40  // b6:5 = 10
#define BLOCK_ACK                   0x60  // b6:5 = 11

//
// rtmp_data.c use these definition
//
#define LENGTH_802_11               24
#define LENGTH_802_11_AND_H         30
#define LENGTH_802_11_CRC_H         34
#define LENGTH_802_11_CRC           28
#define LENGTH_802_11_WITH_ADDR4    30
#define LENGTH_802_3                14
#define LENGTH_802_3_TYPE           2
#define LENGTH_802_1_H              8
#define LENGTH_EAPOL_H              4
#define LENGTH_WMMQOS_H                         2
#define LENGTH_CRC                  4
#define MAX_SEQ_NUMBER              0x0fff
#define LENGTH_802_3_NO_TYPE            12
#define LENGTH_802_1Q                           4 /* VLAN related */

// STA_CSR4.field.TxResult
#define TX_RESULT_SUCCESS           0
#define TX_RESULT_ZERO_LENGTH       1
#define TX_RESULT_UNDER_RUN         2
#define TX_RESULT_OHY_ERROR         4
#define TX_RESULT_RETRY_FAIL        6

// All PHY rate summary in TXD
// Preamble MODE in TxD
#define MODE_CCK        0
#define MODE_OFDM   1
#define MODE_HTMIX      2
#define MODE_HTGREENFIELD       3

// MCS for CCK.  BW.SGI.STBC are reserved
#define MCS_LONGP_RATE_1                      0  // long preamble CCK 1Mbps
#define MCS_LONGP_RATE_2                      1 // long preamble CCK 1Mbps
#define MCS_LONGP_RATE_5_5                    2
#define MCS_LONGP_RATE_11                     3
#define MCS_SHORTP_RATE_1                      4         // long preamble CCK 1Mbps. short is forbidden in 1Mbps
#define MCS_SHORTP_RATE_2                      5        // short preamble CCK 2Mbps
#define MCS_SHORTP_RATE_5_5                    6
#define MCS_SHORTP_RATE_11                     7
// To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved
#define MCS_RATE_6                      0   // legacy OFDM
#define MCS_RATE_9                      1   // OFDM
#define MCS_RATE_12                     2   // OFDM
#define MCS_RATE_18                     3   // OFDM
#define MCS_RATE_24                     4  // OFDM
#define MCS_RATE_36                     5   // OFDM
#define MCS_RATE_48                     6  // OFDM
#define MCS_RATE_54                     7 // OFDM
// HT
#define MCS_0           0       // 1S
#define MCS_1           1
#define MCS_2           2
#define MCS_3           3
#define MCS_4           4
#define MCS_5           5
#define MCS_6           6
#define MCS_7           7
#define MCS_8           8       // 2S
#define MCS_9           9
#define MCS_10          10
#define MCS_11          11
#define MCS_12          12
#define MCS_13          13
#define MCS_14          14
#define MCS_15          15
#define MCS_16          16      // 3*3
#define MCS_17          17
#define MCS_18          18
#define MCS_19          19
#define MCS_20          20
#define MCS_21          21
#define MCS_22          22
#define MCS_23          23
#define MCS_32          32
#define MCS_AUTO                33

// OID_HTPHYMODE
// MODE
#define HTMODE_MM       0
#define HTMODE_GF       1

// Fixed Tx MODE - HT, CCK or OFDM
#define FIXED_TXMODE_HT         0
#define FIXED_TXMODE_CCK        1
#define FIXED_TXMODE_OFDM       2
// BW
#define BW_20           BAND_WIDTH_20
#define BW_40           BAND_WIDTH_40
#define BW_BOTH         BAND_WIDTH_BOTH
#define BW_10           BAND_WIDTH_10   // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.

// SHORTGI
#define GI_400          GAP_INTERVAL_400        // only support in HT mode
#define GI_BOTH         GAP_INTERVAL_BOTH
#define GI_800          GAP_INTERVAL_800
// STBC
#define STBC_NONE       0
#define STBC_USE        1       // limited use in rt2860b phy
#define RXSTBC_ONE      1       // rx support of one spatial stream
#define RXSTBC_TWO      2       // rx support of 1 and 2 spatial stream
#define RXSTBC_THR      3       // rx support of 1~3 spatial stream
// MCS FEEDBACK
#define MCSFBK_NONE     0  // not support mcs feedback /
#define MCSFBK_RSV      1       // reserved
#define MCSFBK_UNSOLICIT        2       // only support unsolict mcs feedback
#define MCSFBK_MRQ      3       // response to both MRQ and unsolict mcs feedback

// MIMO power safe
#define MMPS_STATIC     0
#define MMPS_DYNAMIC            1
#define   MMPS_RSV              2
#define MMPS_ENABLE             3


// A-MSDU size
#define AMSDU_0 0
#define AMSDU_1         1

// MCS use 7 bits
#define TXRATEMIMO              0x80
#define TXRATEMCS               0x7F
#define TXRATEOFDM              0x7F
#define RATE_1                      0
#define RATE_2                      1
#define RATE_5_5                    2
#define RATE_11                     3
#define RATE_6                      4   // OFDM
#define RATE_9                      5   // OFDM
#define RATE_12                     6   // OFDM
#define RATE_18                     7   // OFDM
#define RATE_24                     8   // OFDM
#define RATE_36                     9   // OFDM
#define RATE_48                     10  // OFDM
#define RATE_54                     11  // OFDM
#define RATE_FIRST_OFDM_RATE        RATE_6
#define RATE_LAST_OFDM_RATE             RATE_54
#define RATE_6_5                    12  // HT mix
#define RATE_13                     13  // HT mix
#define RATE_19_5                   14  // HT mix
#define RATE_26                     15  // HT mix
#define RATE_39                     16  // HT mix
#define RATE_52                     17  // HT mix
#define RATE_58_5                   18  // HT mix
#define RATE_65                     19  // HT mix
#define RATE_78                     20  // HT mix
#define RATE_104                    21  // HT mix
#define RATE_117                    22  // HT mix
#define RATE_130                    23  // HT mix
//#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only
#define HTRATE_0                      12
#define RATE_FIRST_MM_RATE        HTRATE_0
#define RATE_FIRST_HT_RATE        HTRATE_0
#define RATE_LAST_HT_RATE        HTRATE_0

// pTxWI->txop
#define IFS_HTTXOP                 0    // The txop will be handles by ASIC.
#define IFS_PIFS                    1
#define IFS_SIFS                    2
#define IFS_BACKOFF                 3

// pTxD->RetryMode
#define LONG_RETRY                  1
#define SHORT_RETRY                 0

// Country Region definition
#define REGION_MINIMUM_BG_BAND            0
#define REGION_0_BG_BAND                  0       // 1-11
#define REGION_1_BG_BAND                  1       // 1-13
#define REGION_2_BG_BAND                  2       // 10-11
#define REGION_3_BG_BAND                  3       // 10-13
#define REGION_4_BG_BAND                  4       // 14
#define REGION_5_BG_BAND                  5       // 1-14
#define REGION_6_BG_BAND                  6       // 3-9
#define REGION_7_BG_BAND                  7       // 5-13
#define REGION_31_BG_BAND                 31       // 5-13
#define REGION_MAXIMUM_BG_BAND            7

#define REGION_MINIMUM_A_BAND             0
#define REGION_0_A_BAND                   0       // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
#define REGION_1_A_BAND                   1       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
#define REGION_2_A_BAND                   2       // 36, 40, 44, 48, 52, 56, 60, 64
#define REGION_3_A_BAND                   3       // 52, 56, 60, 64, 149, 153, 157, 161
#define REGION_4_A_BAND                   4       // 149, 153, 157, 161, 165
#define REGION_5_A_BAND                   5       // 149, 153, 157, 161
#define REGION_6_A_BAND                   6       // 36, 40, 44, 48
#define REGION_7_A_BAND                   7       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
#define REGION_8_A_BAND                   8       // 52, 56, 60, 64
#define REGION_9_A_BAND                   9       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
#define REGION_10_A_BAND                  10      // 36, 40, 44, 48, 149, 153, 157, 161, 165
#define REGION_11_A_BAND                  11      // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
#define REGION_MAXIMUM_A_BAND             11

// pTxD->CipherAlg
#define CIPHER_NONE                 0
#define CIPHER_WEP64                1
#define CIPHER_WEP128               2
#define CIPHER_TKIP                 3
#define CIPHER_AES                  4
#define CIPHER_CKIP64               5
#define CIPHER_CKIP128              6
#define CIPHER_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
#define CIPHER_SMS4                                     8

// value domain of pAd->RfIcType
#define RFIC_2820                   1       // 2.4G 2T3R
#define RFIC_2850                   2       // 2.4G/5G 2T3R
#define RFIC_2720                   3       // 2.4G 1T2R
#define RFIC_2750                   4       // 2.4G/5G 1T2R
#define RFIC_3020                   5       // 2.4G 1T1R
#define RFIC_2020                   6       // 2.4G B/G
#define RFIC_3021                   7       // 2.4G 1T2R
#define RFIC_3022                   8       // 2.4G 2T2R

// LED Status.
#define LED_LINK_DOWN               0
#define LED_LINK_UP                 1
#define LED_RADIO_OFF               2
#define LED_RADIO_ON                3
#define LED_HALT                    4
#define LED_WPS                     5
#define LED_ON_SITE_SURVEY          6
#define LED_POWER_UP                7

// value domain of pAd->LedCntl.LedMode and E2PROM
#define LED_MODE_DEFAULT            0
#define LED_MODE_TWO_LED                        1
#define LED_MODE_SIGNAL_STREGTH         8  // EEPROM define =8

// RC4 init value, used fro WEP & TKIP
#define PPPINITFCS32                0xffffffff   /* Initial FCS value */

// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
#define WPA_802_1X_PORT_SECURED     1
#define WPA_802_1X_PORT_NOT_SECURED 2

#define PAIRWISE_KEY                1
#define GROUP_KEY                   2

//definition of DRS
#define MAX_STEP_OF_TX_RATE_SWITCH      32


// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
#define MAX_NUM_OF_FREE_NDIS_PACKET 128

//Block ACK
#define MAX_TX_REORDERBUF   64
#define MAX_RX_REORDERBUF   64
#define DEFAULT_TX_TIMEOUT   30
#define DEFAULT_RX_TIMEOUT   30

// definition of Recipient or Originator
#define I_RECIPIENT                  TRUE
#define I_ORIGINATOR                   FALSE

#define DEFAULT_BBP_TX_POWER        0
#define DEFAULT_RF_TX_POWER         5

#define MAX_INI_BUFFER_SIZE                     4096
#define MAX_PARAM_BUFFER_SIZE           (2048) // enough for ACL (18*64)
                                                                                        //18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
                                                                                        //64 : MAX_NUM_OF_ACL_LIST
// definition of pAd->OpMode
#define OPMODE_STA                  0
#define OPMODE_AP                   1
//#define OPMODE_L3_BRG               2       // as AP and STA at the same time

// ========================= AP rtmp_def.h ===========================
// value domain for pAd->EventTab.Log[].Event
#define EVENT_RESET_ACCESS_POINT    0 // Log = "hh:mm:ss   Restart Access Point"
#define EVENT_ASSOCIATED            1 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
#define EVENT_DISASSOCIATED         2 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
#define EVENT_AGED_OUT              3 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
#define EVENT_COUNTER_M             4
#define EVENT_INVALID_PSK           5
#define EVENT_MAX_EVENT_TYPE        6
// ==== end of AP rtmp_def.h ============

// definition RSSI Number
#define RSSI_0                                  0
#define RSSI_1                                  1
#define RSSI_2                                  2

// definition of radar detection
#define RD_NORMAL_MODE                          0       // Not found radar signal
#define RD_SWITCHING_MODE                       1       // Found radar signal, and doing channel switch
#define RD_SILENCE_MODE                         2       // After channel switch, need to be silence a while to ensure radar not found

//Driver defined cid for mapping status and command.
#define  SLEEPCID       0x11
#define  WAKECID        0x22
#define  QUERYPOWERCID  0x33
#define  OWNERMCU       0x1
#define  OWNERCPU       0x0

// MBSSID definition
#define ENTRY_NOT_FOUND             0xFF


/* After Linux 2.6.9,
 * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
 * #define IFF_802_1Q_VLAN 0x1         --    802.1Q VLAN device.  in if.h
 * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
 *
 * For this reason, we MUST use EVEN value in priv_flags
 */
#define INT_MAIN                    0x0100
#define INT_MBSSID                  0x0200
#define INT_WDS                     0x0300
#define INT_APCLI                   0x0400
#define INT_MESH                        0x0500

// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)

// WEP Key TYPE
#define WEP_HEXADECIMAL_TYPE    0
#define WEP_ASCII_TYPE          1



// WIRELESS EVENTS definition
/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
#define IW_CUSTOM_MAX_LEN                                                       255     /* In bytes */

// For system event - start
#define IW_SYS_EVENT_FLAG_START                     0x0200
#define IW_ASSOC_EVENT_FLAG                         0x0200
#define IW_DISASSOC_EVENT_FLAG                      0x0201
#define IW_DEAUTH_EVENT_FLAG                            0x0202
#define IW_AGEOUT_EVENT_FLAG                            0x0203
#define IW_COUNTER_MEASURES_EVENT_FLAG              0x0204
#define IW_REPLAY_COUNTER_DIFF_EVENT_FLAG           0x0205
#define IW_RSNIE_DIFF_EVENT_FLAG                                0x0206
#define IW_MIC_DIFF_EVENT_FLAG                                  0x0207
#define IW_ICV_ERROR_EVENT_FLAG                                         0x0208
#define IW_MIC_ERROR_EVENT_FLAG                                         0x0209
#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG                          0x020A
#define IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG                       0x020B
#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG                         0x020C
#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG                         0x020D
#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG                         0x020E
#define IW_STA_LINKUP_EVENT_FLAG                                        0x020F
#define IW_STA_LINKDOWN_EVENT_FLAG                                      0x0210
#define IW_SCAN_COMPLETED_EVENT_FLAG                            0x0211
#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG                         0x0212
// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
#define IW_SYS_EVENT_FLAG_END                       0x0212
#define IW_SYS_EVENT_TYPE_NUM                                           (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
// For system event - end

// For spoof attack event - start
#define IW_SPOOF_EVENT_FLAG_START                   0x0300
#define IW_CONFLICT_SSID_EVENT_FLAG                                     0x0300
#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG                          0x0301
#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG                        0x0302
#define IW_SPOOF_PROBE_RESP_EVENT_FLAG                          0x0303
#define IW_SPOOF_BEACON_EVENT_FLAG                                      0x0304
#define IW_SPOOF_DISASSOC_EVENT_FLAG                            0x0305
#define IW_SPOOF_AUTH_EVENT_FLAG                                        0x0306
#define IW_SPOOF_DEAUTH_EVENT_FLAG                                      0x0307
#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG                        0x0308
#define IW_REPLAY_ATTACK_EVENT_FLAG                                     0x0309
// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
#define IW_SPOOF_EVENT_FLAG_END                     0x0309
#define IW_SPOOF_EVENT_TYPE_NUM                                         (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
// For spoof attack event - end

// For flooding attack event - start
#define IW_FLOOD_EVENT_FLAG_START                   0x0400
#define IW_FLOOD_AUTH_EVENT_FLAG                                        0x0400
#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG                           0x0401
#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG                         0x0402
#define IW_FLOOD_PROBE_REQ_EVENT_FLAG                           0x0403
#define IW_FLOOD_DISASSOC_EVENT_FLAG                            0x0404
#define IW_FLOOD_DEAUTH_EVENT_FLAG                                      0x0405
#define IW_FLOOD_EAP_REQ_EVENT_FLAG                                     0x0406
// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
#define IW_FLOOD_EVENT_FLAG_END                         0x0406
#define IW_FLOOD_EVENT_TYPE_NUM                                         (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
// For flooding attack - end

// End - WIRELESS EVENTS definition

// definition for DLS, kathy
#define MAX_NUM_OF_INIT_DLS_ENTRY   1
#define MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY

//Block ACK , rt2860, kathy
#define MAX_TX_REORDERBUF               64
#define MAX_RX_REORDERBUF               64
#define DEFAULT_TX_TIMEOUT              30
#define DEFAULT_RX_TIMEOUT              30
#define MAX_BARECI_SESSION              8

#ifndef IW_ESSID_MAX_SIZE
/* Maximum size of the ESSID and pAd->nickname strings */
#define IW_ESSID_MAX_SIZE               32
#endif

#ifdef MCAST_RATE_SPECIFIC
#define MCAST_DISABLE   0
#define MCAST_CCK               1
#define MCAST_OFDM              2
#define MCAST_HTMIX             3
#endif // MCAST_RATE_SPECIFIC //

#ifdef RT2860
// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function
// This is to indicate from where to call this function.
#define DOT11POWERSAVE          0       // TO do .11 power save sleep
#define GUIRADIO_OFF            1       // To perform Radio OFf command from GUI
#define RTMP_HALT                       2       // Called from Halt handler.
#define GUI_IDLE_POWER_SAVE     3       // Call to sleep before link up with AP
#define FROM_TX                         4       // Force wake up from Tx packet.
#endif
#ifdef RT2870
// For AsicRadioOff/AsicRadioOn function
#define DOT11POWERSAVE          0
#define GUIRADIO_OFF            1
#define RTMP_HALT                   2
#define GUI_IDLE_POWER_SAVE             3
#endif

// definition for WpaSupport flag
#define WPA_SUPPLICANT_DISABLE                          0
#define WPA_SUPPLICANT_ENABLE                           1
#define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI       2

// Endian byte swapping codes
#define SWAP16(x) \
    ((UINT16)( \
    (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
    (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))

#define SWAP32(x) \
    ((UINT32)( \
    (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
    (((UINT32)(x) & (UINT32) 0x0000ff00UL) <<  8) | \
    (((UINT32)(x) & (UINT32) 0x00ff0000UL) >>  8) | \
    (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))

#define SWAP64(x) \
    ((UINT64)( \
    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) <<  8) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >>  8) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))

#define cpu2le64(x) ((UINT64)(x))
#define le2cpu64(x) ((UINT64)(x))
#define cpu2le32(x) ((UINT32)(x))
#define le2cpu32(x) ((UINT32)(x))
#define cpu2le16(x) ((UINT16)(x))
#define le2cpu16(x) ((UINT16)(x))
#define cpu2be64(x) SWAP64((x))
#define be2cpu64(x) SWAP64((x))
#define cpu2be32(x) SWAP32((x))
#define be2cpu32(x) SWAP32((x))
#define cpu2be16(x) SWAP16((x))
#define be2cpu16(x) SWAP16((x))

#endif  // __RTMP_DEF_H__