drivers/ata/pata_cs5530.c

   1 /*
   2  * pata-cs5530.c        - CS5530 PATA for new ATA layer
   3  *                        (C) 2005 Red Hat Inc
   4  *
   5  * based upon cs5530.c by Mark Lord.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  *
  20  * Loosely based on the piix & svwks drivers.
  21  *
  22  * Documentation:
  23  *      Available from AMD web site.
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/module.h>
  28 #include <linux/pci.h>
  29 #include <linux/init.h>
  30 #include <linux/blkdev.h>
  31 #include <linux/delay.h>
  32 #include <scsi/scsi_host.h>
  33 #include <linux/libata.h>
  34 #include <linux/dmi.h>
  35
  36 #define DRV_NAME        "pata_cs5530"
  37 #define DRV_VERSION     "0.7.4"
  38
  39 static void __iomem *cs5530_port_base(struct ata_port *ap)
  40 {
  41         unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr;
  42
  43         return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no);
  44 }
  45
  46 /**
  47  *      cs5530_set_piomode              -       PIO setup
  48  *      @ap: ATA interface
  49  *      @adev: device on the interface
  50  *
  51  *      Set our PIO requirements. This is fairly simple on the CS5530
  52  *      chips.
  53  */
  54
  55 static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
  56 {
  57         static const unsigned int cs5530_pio_timings[2][5] = {
  58                 {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
  59                 {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
  60         };
  61         void __iomem *base = cs5530_port_base(ap);
  62         u32 tuning;
  63         int format;
  64
  65         /* Find out which table to use */
  66         tuning = ioread32(base + 0x04);
  67         format = (tuning & 0x80000000UL) ? 1 : 0;
  68
  69         /* Now load the right timing register */
  70         if (adev->devno)
  71                 base += 0x08;
  72
  73         iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
  74 }
  75
  76 /**
  77  *      cs5530_set_dmamode              -       DMA timing setup
  78  *      @ap: ATA interface
  79  *      @adev: Device being configured
  80  *
  81  *      We cannot mix MWDMA and UDMA without reloading timings each switch
  82  *      master to slave. We track the last DMA setup in order to minimise
  83  *      reloads.
  84  */
  85
  86 static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  87 {
  88         void __iomem *base = cs5530_port_base(ap);
  89         u32 tuning, timing = 0;
  90         u8 reg;
  91
  92         /* Find out which table to use */
  93         tuning = ioread32(base + 0x04);
  94
  95         switch(adev->dma_mode) {
  96                 case XFER_UDMA_0:
  97                         timing  = 0x00921250;break;
  98                 case XFER_UDMA_1:
  99                         timing  = 0x00911140;break;
 100                 case XFER_UDMA_2:
 101                         timing  = 0x00911030;break;
 102                 case XFER_MW_DMA_0:
 103                         timing  = 0x00077771;break;
 104                 case XFER_MW_DMA_1:
 105                         timing  = 0x00012121;break;
 106                 case XFER_MW_DMA_2:
 107                         timing  = 0x00002020;break;
 108                 default:
 109                         BUG();
 110         }
 111         /* Merge in the PIO format bit */
 112         timing |= (tuning & 0x80000000UL);
 113         if (adev->devno == 0) /* Master */
 114                 iowrite32(timing, base + 0x04);
 115         else {
 116                 if (timing & 0x00100000)
 117                         tuning |= 0x00100000;   /* UDMA for both */
 118                 else
 119                         tuning &= ~0x00100000;  /* MWDMA for both */
 120                 iowrite32(tuning, base + 0x04);
 121                 iowrite32(timing, base + 0x0C);
 122         }
 123
 124         /* Set the DMA capable bit in the BMDMA area */
 125         reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 126         reg |= (1 << (5 + adev->devno));
 127         iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 128
 129         /* Remember the last DMA setup we did */
 130
 131         ap->private_data = adev;
 132 }
 133
 134 /**
 135  *      cs5530_qc_issue         -       command issue
 136  *      @qc: command pending
 137  *
 138  *      Called when the libata layer is about to issue a command. We wrap
 139  *      this interface so that we can load the correct ATA timings if
 140  *      necessary.  Specifically we have a problem that there is only
 141  *      one MWDMA/UDMA bit.
 142  */
 143
 144 static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 145 {
 146         struct ata_port *ap = qc->ap;
 147         struct ata_device *adev = qc->dev;
 148         struct ata_device *prev = ap->private_data;
 149
 150         /* See if the DMA settings could be wrong */
 151         if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 152                 /* Maybe, but do the channels match MWDMA/UDMA ? */
 153                 if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
 154                     (ata_using_udma(prev) && !ata_using_udma(adev)))
 155                         /* Switch the mode bits */
 156                         cs5530_set_dmamode(ap, adev);
 157         }
 158
 159         return ata_sff_qc_issue(qc);
 160 }
 161
 162 static struct scsi_host_template cs5530_sht = {
 163         ATA_BMDMA_SHT(DRV_NAME),
 164         .sg_tablesize   = LIBATA_DUMB_MAX_PRD,
 165 };
 166
 167 static struct ata_port_operations cs5530_port_ops = {
 168         .inherits       = &ata_bmdma_port_ops,
 169
 170         .qc_prep        = ata_sff_dumb_qc_prep,
 171         .qc_issue       = cs5530_qc_issue,
 172
 173         .cable_detect   = ata_cable_40wire,
 174         .set_piomode    = cs5530_set_piomode,
 175         .set_dmamode    = cs5530_set_dmamode,
 176 };
 177
 178 static const struct dmi_system_id palmax_dmi_table[] = {
 179         {
 180                 .ident = "Palmax PD1100",
 181                 .matches = {
 182                         DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
 183                         DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
 184                 },
 185         },
 186         { }
 187 };
 188
 189 static int cs5530_is_palmax(void)
 190 {
 191         if (dmi_check_system(palmax_dmi_table)) {
 192                 printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
 193                 return 1;
 194         }
 195         return 0;
 196 }
 197
 198
 199 /**
 200  *      cs5530_init_chip        -       Chipset init
 201  *
 202  *      Perform the chip initialisation work that is shared between both
 203  *      setup and resume paths
 204  */
 205
 206 static int cs5530_init_chip(void)
 207 {
 208         struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
 209
 210         while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
 211                 switch (dev->device) {
 212                         case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
 213                                 master_0 = pci_dev_get(dev);
 214                                 break;
 215                         case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
 216                                 cs5530_0 = pci_dev_get(dev);
 217                                 break;
 218                 }
 219         }
 220         if (!master_0) {
 221                 printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
 222                 goto fail_put;
 223         }
 224         if (!cs5530_0) {
 225                 printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
 226                 goto fail_put;
 227         }
 228
 229         pci_set_master(cs5530_0);
 230         pci_try_set_mwi(cs5530_0);
 231
 232         /*
 233          * Set PCI CacheLineSize to 16-bytes:
 234          * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
 235          *
 236          * Note: This value is constant because the 5530 is only a Geode companion
 237          */
 238
 239         pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
 240
 241         /*
 242          * Disable trapping of UDMA register accesses (Win98 hack):
 243          * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
 244          */
 245
 246         pci_write_config_word(cs5530_0, 0xd0, 0x5006);
 247
 248         /*
 249          * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
 250          * The other settings are what is necessary to get the register
 251          * into a sane state for IDE DMA operation.
 252          */
 253
 254         pci_write_config_byte(master_0, 0x40, 0x1e);
 255
 256         /*
 257          * Set max PCI burst size (16-bytes seems to work best):
 258          *         16bytes: set bit-1 at 0x41 (reg value of 0x16)
 259          *      all others: clear bit-1 at 0x41, and do:
 260          *        128bytes: OR 0x00 at 0x41
 261          *        256bytes: OR 0x04 at 0x41
 262          *        512bytes: OR 0x08 at 0x41
 263          *       1024bytes: OR 0x0c at 0x41
 264          */
 265
 266         pci_write_config_byte(master_0, 0x41, 0x14);
 267
 268         /*
 269          * These settings are necessary to get the chip
 270          * into a sane state for IDE DMA operation.
 271          */
 272
 273         pci_write_config_byte(master_0, 0x42, 0x00);
 274         pci_write_config_byte(master_0, 0x43, 0xc1);
 275
 276         pci_dev_put(master_0);
 277         pci_dev_put(cs5530_0);
 278         return 0;
 279 fail_put:
 280         if (master_0)
 281                 pci_dev_put(master_0);
 282         if (cs5530_0)
 283                 pci_dev_put(cs5530_0);
 284         return -ENODEV;
 285 }
 286
 287 /**
 288  *      cs5530_init_one         -       Initialise a CS5530
 289  *      @dev: PCI device
 290  *      @id: Entry in match table
 291  *
 292  *      Install a driver for the newly found CS5530 companion chip. Most of
 293  *      this is just housekeeping. We have to set the chip up correctly and
 294  *      turn off various bits of emulation magic.
 295  */
 296
 297 static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 298 {
 299         static const struct ata_port_info info = {
 300                 .flags = ATA_FLAG_SLAVE_POSS,
 301                 .pio_mask = 0x1f,
 302                 .mwdma_mask = 0x07,
 303                 .udma_mask = 0x07,
 304                 .port_ops = &cs5530_port_ops
 305         };
 306         /* The docking connector doesn't do UDMA, and it seems not MWDMA */
 307         static const struct ata_port_info info_palmax_secondary = {
 308                 .flags = ATA_FLAG_SLAVE_POSS,
 309                 .pio_mask = 0x1f,
 310                 .port_ops = &cs5530_port_ops
 311         };
 312         const struct ata_port_info *ppi[] = { &info, NULL };
 313         int rc;
 314
 315         rc = pcim_enable_device(pdev);
 316         if (rc)
 317                 return rc;
 318
 319         /* Chip initialisation */
 320         if (cs5530_init_chip())
 321                 return -ENODEV;
 322
 323         if (cs5530_is_palmax())
 324                 ppi[1] = &info_palmax_secondary;
 325
 326         /* Now kick off ATA set up */
 327         return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
 328 }
 329
 330 #ifdef CONFIG_PM
 331 static int cs5530_reinit_one(struct pci_dev *pdev)
 332 {
 333         struct ata_host *host = dev_get_drvdata(&pdev->dev);
 334         int rc;
 335
 336         rc = ata_pci_device_do_resume(pdev);
 337         if (rc)
 338                 return rc;
 339
 340         /* If we fail on resume we are doomed */
 341         if (cs5530_init_chip())
 342                 return -EIO;
 343
 344         ata_host_resume(host);
 345         return 0;
 346 }
 347 #endif /* CONFIG_PM */
 348
 349 static const struct pci_device_id cs5530[] = {
 350         { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
 351
 352         { },
 353 };
 354
 355 static struct pci_driver cs5530_pci_driver = {
 356         .name           = DRV_NAME,
 357         .id_table       = cs5530,
 358         .probe          = cs5530_init_one,
 359         .remove         = ata_pci_remove_one,
 360 #ifdef CONFIG_PM
 361         .suspend        = ata_pci_device_suspend,
 362         .resume         = cs5530_reinit_one,
 363 #endif
 364 };
 365
 366 static int __init cs5530_init(void)
 367 {
 368         return pci_register_driver(&cs5530_pci_driver);
 369 }
 370
 371 static void __exit cs5530_exit(void)
 372 {
 373         pci_unregister_driver(&cs5530_pci_driver);
 374 }
 375
 376 MODULE_AUTHOR("Alan Cox");
 377 MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
 378 MODULE_LICENSE("GPL");
 379 MODULE_DEVICE_TABLE(pci, cs5530);
 380 MODULE_VERSION(DRV_VERSION);
 381
 382 module_init(cs5530_init);
 383 module_exit(cs5530_exit);