PNP: convert to using pnp_dbg()
[linux-2.6/mini2440.git] / drivers / net / mac89x0.c
blob4ce8afd481c3f13bd75caa570c5597c28b2a68cb
1 /* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
2 /*
3 Written 1996 by Russell Nelson, with reference to skeleton.c
4 written 1993-1994 by Donald Becker.
6 This software may be used and distributed according to the terms
7 of the GNU General Public License, incorporated herein by reference.
9 The author may be reached at nelson@crynwr.com, Crynwr
10 Software, 11 Grant St., Potsdam, NY 13676
12 Changelog:
14 Mike Cruse : mcruse@cti-ltd.com
15 : Changes for Linux 2.0 compatibility.
16 : Added dev_id parameter in net_interrupt(),
17 : request_irq() and free_irq(). Just NULL for now.
19 Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
20 : in net_open() and net_close() so kerneld would know
21 : that the module is in use and wouldn't eject the
22 : driver prematurely.
24 Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
25 : as an example. Disabled autoprobing in init_module(),
26 : not a good thing to do to other devices while Linux
27 : is running from all accounts.
29 Alan Cox : Removed 1.2 support, added 2.1 extra counters.
31 David Huggins-Daines <dhd@debian.org>
33 Split this off into mac89x0.c, and gutted it of all parts which are
34 not relevant to the existing CS8900 cards on the Macintosh
35 (i.e. basically the Daynaport CS and LC cards). To be precise:
37 * Removed all the media-detection stuff, because these cards are
38 TP-only.
40 * Lobotomized the ISA interrupt bogosity, because these cards use
41 a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
43 * Basically eliminated everything not relevant to getting the
44 cards minimally functioning on the Macintosh.
46 I might add that these cards are badly designed even from the Mac
47 standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
48 I/O space and NuBus interrupts for these cards, but neglected to
49 provide anything even remotely resembling a NuBus ROM. Therefore we
50 have to probe for them in a brain-damaged ISA-like fashion.
52 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
53 check kmalloc and release the allocated memory on failure in
54 mac89x0_probe and in init_module
55 use local_irq_{save,restore}(flags) in net_get_stat, not just
56 local_irq_{dis,en}able()
59 static char *version =
60 "cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
62 /* ======================= configure the driver here ======================= */
64 /* use 0 for production, 1 for verification, >2 for debug */
65 #ifndef NET_DEBUG
66 #define NET_DEBUG 0
67 #endif
69 /* ======================= end of configuration ======================= */
72 /* Always include 'config.h' first in case the user wants to turn on
73 or override something. */
74 #include <linux/module.h>
76 #define PRINTK(x) printk x
79 Sources:
81 Crynwr packet driver epktisa.
83 Crystal Semiconductor data sheets.
87 #include <linux/kernel.h>
88 #include <linux/types.h>
89 #include <linux/fcntl.h>
90 #include <linux/interrupt.h>
91 #include <linux/ioport.h>
92 #include <linux/in.h>
93 #include <linux/slab.h>
94 #include <linux/string.h>
95 #include <linux/nubus.h>
96 #include <linux/errno.h>
97 #include <linux/init.h>
98 #include <linux/netdevice.h>
99 #include <linux/etherdevice.h>
100 #include <linux/skbuff.h>
101 #include <linux/delay.h>
102 #include <linux/bitops.h>
104 #include <asm/system.h>
105 #include <asm/io.h>
106 #include <asm/hwtest.h>
107 #include <asm/macints.h>
109 #include "cs89x0.h"
111 static unsigned int net_debug = NET_DEBUG;
113 /* Information that need to be kept for each board. */
114 struct net_local {
115 struct net_device_stats stats;
116 int chip_type; /* one of: CS8900, CS8920, CS8920M */
117 char chip_revision; /* revision letter of the chip ('A'...) */
118 int send_cmd; /* the propercommand used to send a packet. */
119 int rx_mode;
120 int curr_rx_cfg;
121 int send_underrun; /* keep track of how many underruns in a row we get */
122 struct sk_buff *skb;
125 /* Index to functions, as function prototypes. */
127 #if 0
128 extern void reset_chip(struct net_device *dev);
129 #endif
130 static int net_open(struct net_device *dev);
131 static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
132 static irqreturn_t net_interrupt(int irq, void *dev_id);
133 static void set_multicast_list(struct net_device *dev);
134 static void net_rx(struct net_device *dev);
135 static int net_close(struct net_device *dev);
136 static struct net_device_stats *net_get_stats(struct net_device *dev);
137 static int set_mac_address(struct net_device *dev, void *addr);
140 /* Example routines you must write ;->. */
141 #define tx_done(dev) 1
143 /* For reading/writing registers ISA-style */
144 static inline int
145 readreg_io(struct net_device *dev, int portno)
147 nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
148 return swab16(nubus_readw(dev->base_addr + DATA_PORT));
151 static inline void
152 writereg_io(struct net_device *dev, int portno, int value)
154 nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
155 nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
158 /* These are for reading/writing registers in shared memory */
159 static inline int
160 readreg(struct net_device *dev, int portno)
162 return swab16(nubus_readw(dev->mem_start + portno));
165 static inline void
166 writereg(struct net_device *dev, int portno, int value)
168 nubus_writew(swab16(value), dev->mem_start + portno);
171 /* Probe for the CS8900 card in slot E. We won't bother looking
172 anywhere else until we have a really good reason to do so. */
173 struct net_device * __init mac89x0_probe(int unit)
175 struct net_device *dev;
176 static int once_is_enough;
177 struct net_local *lp;
178 static unsigned version_printed;
179 int i, slot;
180 unsigned rev_type = 0;
181 unsigned long ioaddr;
182 unsigned short sig;
183 int err = -ENODEV;
184 DECLARE_MAC_BUF(mac);
186 if (!MACH_IS_MAC)
187 return ERR_PTR(-ENODEV);
189 dev = alloc_etherdev(sizeof(struct net_local));
190 if (!dev)
191 return ERR_PTR(-ENOMEM);
193 if (unit >= 0) {
194 sprintf(dev->name, "eth%d", unit);
195 netdev_boot_setup_check(dev);
198 if (once_is_enough)
199 goto out;
200 once_is_enough = 1;
202 /* We might have to parameterize this later */
203 slot = 0xE;
204 /* Get out now if there's a real NuBus card in slot E */
205 if (nubus_find_slot(slot, NULL) != NULL)
206 goto out;
208 /* The pseudo-ISA bits always live at offset 0x300 (gee,
209 wonder why...) */
210 ioaddr = (unsigned long)
211 nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
213 unsigned long flags;
214 int card_present;
216 local_irq_save(flags);
217 card_present = hwreg_present((void*) ioaddr+4)
218 && hwreg_present((void*) ioaddr + DATA_PORT);
219 local_irq_restore(flags);
221 if (!card_present)
222 goto out;
225 nubus_writew(0, ioaddr + ADD_PORT);
226 sig = nubus_readw(ioaddr + DATA_PORT);
227 if (sig != swab16(CHIP_EISA_ID_SIG))
228 goto out;
230 /* Initialize the net_device structure. */
231 lp = netdev_priv(dev);
233 /* Fill in the 'dev' fields. */
234 dev->base_addr = ioaddr;
235 dev->mem_start = (unsigned long)
236 nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
237 dev->mem_end = dev->mem_start + 0x1000;
239 /* Turn on shared memory */
240 writereg_io(dev, PP_BusCTL, MEMORY_ON);
242 /* get the chip type */
243 rev_type = readreg(dev, PRODUCT_ID_ADD);
244 lp->chip_type = rev_type &~ REVISON_BITS;
245 lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
247 /* Check the chip type and revision in order to set the correct send command
248 CS8920 revision C and CS8900 revision F can use the faster send. */
249 lp->send_cmd = TX_AFTER_381;
250 if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
251 lp->send_cmd = TX_NOW;
252 if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
253 lp->send_cmd = TX_NOW;
255 if (net_debug && version_printed++ == 0)
256 printk(version);
258 printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
259 dev->name,
260 lp->chip_type==CS8900?'0':'2',
261 lp->chip_type==CS8920M?"M":"",
262 lp->chip_revision,
263 dev->base_addr);
265 /* Try to read the MAC address */
266 if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
267 printk("\nmac89x0: No EEPROM, giving up now.\n");
268 goto out1;
269 } else {
270 for (i = 0; i < ETH_ALEN; i += 2) {
271 /* Big-endian (why??!) */
272 unsigned short s = readreg(dev, PP_IA + i);
273 dev->dev_addr[i] = s >> 8;
274 dev->dev_addr[i+1] = s & 0xff;
278 dev->irq = SLOT2IRQ(slot);
280 /* print the IRQ and ethernet address. */
282 printk(" IRQ %d ADDR %s\n",
283 dev->irq, print_mac(mac, dev->dev_addr));
285 dev->open = net_open;
286 dev->stop = net_close;
287 dev->hard_start_xmit = net_send_packet;
288 dev->get_stats = net_get_stats;
289 dev->set_multicast_list = &set_multicast_list;
290 dev->set_mac_address = &set_mac_address;
292 err = register_netdev(dev);
293 if (err)
294 goto out1;
295 return NULL;
296 out1:
297 nubus_writew(0, dev->base_addr + ADD_PORT);
298 out:
299 free_netdev(dev);
300 return ERR_PTR(err);
303 #if 0
304 /* This is useful for something, but I don't know what yet. */
305 void __init reset_chip(struct net_device *dev)
307 int reset_start_time;
309 writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
311 /* wait 30 ms */
312 msleep_interruptible(30);
314 /* Wait until the chip is reset */
315 reset_start_time = jiffies;
316 while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
319 #endif
321 /* Open/initialize the board. This is called (in the current kernel)
322 sometime after booting when the 'ifconfig' program is run.
324 This routine should set everything up anew at each open, even
325 registers that "should" only need to be set once at boot, so that
326 there is non-reboot way to recover if something goes wrong.
328 static int
329 net_open(struct net_device *dev)
331 struct net_local *lp = netdev_priv(dev);
332 int i;
334 /* Disable the interrupt for now */
335 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
337 /* Grab the interrupt */
338 if (request_irq(dev->irq, &net_interrupt, 0, "cs89x0", dev))
339 return -EAGAIN;
341 /* Set up the IRQ - Apparently magic */
342 if (lp->chip_type == CS8900)
343 writereg(dev, PP_CS8900_ISAINT, 0);
344 else
345 writereg(dev, PP_CS8920_ISAINT, 0);
347 /* set the Ethernet address */
348 for (i=0; i < ETH_ALEN/2; i++)
349 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
351 /* Turn on both receive and transmit operations */
352 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
354 /* Receive only error free packets addressed to this card */
355 lp->rx_mode = 0;
356 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
358 lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
360 writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
362 writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
363 TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
365 writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
366 TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
368 /* now that we've got our act together, enable everything */
369 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
370 netif_start_queue(dev);
371 return 0;
374 static int
375 net_send_packet(struct sk_buff *skb, struct net_device *dev)
377 struct net_local *lp = netdev_priv(dev);
378 unsigned long flags;
380 if (net_debug > 3)
381 printk("%s: sent %d byte packet of type %x\n",
382 dev->name, skb->len,
383 (skb->data[ETH_ALEN+ETH_ALEN] << 8)
384 | skb->data[ETH_ALEN+ETH_ALEN+1]);
386 /* keep the upload from being interrupted, since we
387 ask the chip to start transmitting before the
388 whole packet has been completely uploaded. */
389 local_irq_save(flags);
390 netif_stop_queue(dev);
392 /* initiate a transmit sequence */
393 writereg(dev, PP_TxCMD, lp->send_cmd);
394 writereg(dev, PP_TxLength, skb->len);
396 /* Test to see if the chip has allocated memory for the packet */
397 if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
398 /* Gasp! It hasn't. But that shouldn't happen since
399 we're waiting for TxOk, so return 1 and requeue this packet. */
400 local_irq_restore(flags);
401 return 1;
404 /* Write the contents of the packet */
405 skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
406 skb->len+1);
408 local_irq_restore(flags);
409 dev->trans_start = jiffies;
410 dev_kfree_skb (skb);
412 return 0;
415 /* The typical workload of the driver:
416 Handle the network interface interrupts. */
417 static irqreturn_t net_interrupt(int irq, void *dev_id)
419 struct net_device *dev = dev_id;
420 struct net_local *lp;
421 int ioaddr, status;
423 if (dev == NULL) {
424 printk ("net_interrupt(): irq %d for unknown device.\n", irq);
425 return IRQ_NONE;
428 ioaddr = dev->base_addr;
429 lp = netdev_priv(dev);
431 /* we MUST read all the events out of the ISQ, otherwise we'll never
432 get interrupted again. As a consequence, we can't have any limit
433 on the number of times we loop in the interrupt handler. The
434 hardware guarantees that eventually we'll run out of events. Of
435 course, if you're on a slow machine, and packets are arriving
436 faster than you can read them off, you're screwed. Hasta la
437 vista, baby! */
438 while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
439 if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
440 switch(status & ISQ_EVENT_MASK) {
441 case ISQ_RECEIVER_EVENT:
442 /* Got a packet(s). */
443 net_rx(dev);
444 break;
445 case ISQ_TRANSMITTER_EVENT:
446 lp->stats.tx_packets++;
447 netif_wake_queue(dev);
448 if ((status & TX_OK) == 0) lp->stats.tx_errors++;
449 if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
450 if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
451 if (status & TX_LATE_COL) lp->stats.tx_window_errors++;
452 if (status & TX_16_COL) lp->stats.tx_aborted_errors++;
453 break;
454 case ISQ_BUFFER_EVENT:
455 if (status & READY_FOR_TX) {
456 /* we tried to transmit a packet earlier,
457 but inexplicably ran out of buffers.
458 That shouldn't happen since we only ever
459 load one packet. Shrug. Do the right
460 thing anyway. */
461 netif_wake_queue(dev);
463 if (status & TX_UNDERRUN) {
464 if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
465 lp->send_underrun++;
466 if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
467 else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
469 break;
470 case ISQ_RX_MISS_EVENT:
471 lp->stats.rx_missed_errors += (status >>6);
472 break;
473 case ISQ_TX_COL_EVENT:
474 lp->stats.collisions += (status >>6);
475 break;
478 return IRQ_HANDLED;
481 /* We have a good packet(s), get it/them out of the buffers. */
482 static void
483 net_rx(struct net_device *dev)
485 struct net_local *lp = netdev_priv(dev);
486 struct sk_buff *skb;
487 int status, length;
489 status = readreg(dev, PP_RxStatus);
490 if ((status & RX_OK) == 0) {
491 lp->stats.rx_errors++;
492 if (status & RX_RUNT) lp->stats.rx_length_errors++;
493 if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++;
494 if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT)))
495 /* per str 172 */
496 lp->stats.rx_crc_errors++;
497 if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++;
498 return;
501 length = readreg(dev, PP_RxLength);
502 /* Malloc up new buffer. */
503 skb = alloc_skb(length, GFP_ATOMIC);
504 if (skb == NULL) {
505 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
506 lp->stats.rx_dropped++;
507 return;
509 skb_put(skb, length);
511 skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
512 length);
514 if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
515 dev->name, length,
516 (skb->data[ETH_ALEN+ETH_ALEN] << 8)
517 | skb->data[ETH_ALEN+ETH_ALEN+1]);
519 skb->protocol=eth_type_trans(skb,dev);
520 netif_rx(skb);
521 dev->last_rx = jiffies;
522 lp->stats.rx_packets++;
523 lp->stats.rx_bytes += length;
526 /* The inverse routine to net_open(). */
527 static int
528 net_close(struct net_device *dev)
531 writereg(dev, PP_RxCFG, 0);
532 writereg(dev, PP_TxCFG, 0);
533 writereg(dev, PP_BufCFG, 0);
534 writereg(dev, PP_BusCTL, 0);
536 netif_stop_queue(dev);
538 free_irq(dev->irq, dev);
540 /* Update the statistics here. */
542 return 0;
546 /* Get the current statistics. This may be called with the card open or
547 closed. */
548 static struct net_device_stats *
549 net_get_stats(struct net_device *dev)
551 struct net_local *lp = netdev_priv(dev);
552 unsigned long flags;
554 local_irq_save(flags);
555 /* Update the statistics from the device registers. */
556 lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
557 lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
558 local_irq_restore(flags);
560 return &lp->stats;
563 static void set_multicast_list(struct net_device *dev)
565 struct net_local *lp = netdev_priv(dev);
567 if(dev->flags&IFF_PROMISC)
569 lp->rx_mode = RX_ALL_ACCEPT;
571 else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
573 /* The multicast-accept list is initialized to accept-all, and we
574 rely on higher-level filtering for now. */
575 lp->rx_mode = RX_MULTCAST_ACCEPT;
577 else
578 lp->rx_mode = 0;
580 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
582 /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
583 writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
584 (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
588 static int set_mac_address(struct net_device *dev, void *addr)
590 int i;
591 printk("%s: Setting MAC address to ", dev->name);
592 for (i = 0; i < 6; i++)
593 printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
594 printk(".\n");
595 /* set the Ethernet address */
596 for (i=0; i < ETH_ALEN/2; i++)
597 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
599 return 0;
602 #ifdef MODULE
604 static struct net_device *dev_cs89x0;
605 static int debug;
607 module_param(debug, int, 0);
608 MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
609 MODULE_LICENSE("GPL");
611 int __init
612 init_module(void)
614 net_debug = debug;
615 dev_cs89x0 = mac89x0_probe(-1);
616 if (IS_ERR(dev_cs89x0)) {
617 printk(KERN_WARNING "mac89x0.c: No card found\n");
618 return PTR_ERR(dev_cs89x0);
620 return 0;
623 void
624 cleanup_module(void)
626 unregister_netdev(dev_cs89x0);
627 nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
628 free_netdev(dev_cs89x0);
630 #endif /* MODULE */
633 * Local variables:
634 * compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -c -o mac89x0.o mac89x0.c"
635 * version-control: t
636 * kept-new-versions: 5
637 * c-indent-level: 8
638 * tab-width: 8
639 * End: