drivers/parisc/iosapic_private.h

   1 /*
   2  *    Private structs/constants for PARISC IOSAPIC support
   3  *
   4  *    Copyright (C) 2000 Hewlett Packard (Grant Grundler)
   5  *    Copyright (C) 2000,2003 Grant Grundler (grundler at parisc-linux.org)
   6  *    Copyright (C) 2002 Matthew Wilcox (willy at parisc-linux.org)
   7  *
   8  *
   9  *    This program is free software; you can redistribute it and/or modify
  10  *    it under the terms of the GNU General Public License as published by
  11  *    the Free Software Foundation; either version 2 of the License, or
  12  *    (at your option) any later version.
  13  *
  14  *    This program is distributed in the hope that it will be useful,
  15  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *    GNU General Public License for more details.
  18  *
  19  *    You should have received a copy of the GNU General Public License
  20  *    along with this program; if not, write to the Free Software
  21  *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  */
  23
  24 /*
  25 ** This file is private to iosapic driver.
  26 ** If stuff needs to be used by another driver, move it to a common file.
  27 **
  28 ** WARNING: fields most data structures here are ordered to make sure
  29 **          they pack nicely for 64-bit compilation. (ie sizeof(long) == 8)
  30 */
  31
  32
  33 /*
  34 ** Interrupt Routing Stuff
  35 ** -----------------------
  36 ** The interrupt routing table consists of entries derived from
  37 ** MP Specification Draft 1.5. There is one interrupt routing
  38 ** table per cell.  N- and L-class consist of a single cell.
  39 */
  40 struct irt_entry {
  41
  42         /* Entry Type 139 identifies an I/O SAPIC interrupt entry */
  43         u8 entry_type;
  44
  45         /* Entry Length 16 indicates entry is 16 bytes long */
  46         u8 entry_length;
  47
  48         /*
  49         ** Interrupt Type of 0 indicates a vectored interrupt,
  50         ** all other values are reserved
  51         */
  52         u8 interrupt_type;
  53
  54         /*
  55         ** PO and EL
  56         ** Polarity of SAPIC I/O input signals:
  57         **    00 = Reserved
  58         **    01 = Active high
  59         **    10 = Reserved
  60         **    11 = Active low
  61         ** Trigger mode of SAPIC I/O input signals:
  62         **    00 = Reserved
  63         **    01 = Edge-triggered
  64         **    10 = Reserved
  65         **    11 = Level-triggered
  66         */
  67         u8 polarity_trigger;
  68
  69         /*
  70         ** IRQ and DEVNO
  71         ** irq identifies PCI interrupt signal where
  72         **    0x0 corresponds to INT_A#,
  73         **    0x1 corresponds to INT_B#,
  74         **    0x2 corresponds to INT_C#
  75         **    0x3 corresponds to INT_D#
  76         ** PCI device number where interrupt originates
  77         */
  78         u8 src_bus_irq_devno;
  79
  80         /* Source Bus ID identifies the bus where interrupt signal comes from */
  81         u8 src_bus_id;
  82
  83         /*
  84         ** Segment ID is unique across a protection domain and
  85         ** identifies a segment of PCI buses (reserved in
  86         ** MP Specification Draft 1.5)
  87         */
  88         u8 src_seg_id;
  89
  90         /*
  91         ** Destination I/O SAPIC INTIN# identifies the INTIN n pin
  92         ** to which the signal is connected
  93         */
  94         u8 dest_iosapic_intin;
  95
  96         /*
  97         ** Destination I/O SAPIC Address identifies the I/O SAPIC
  98         ** to which the signal is connected
  99         */
 100         u64 dest_iosapic_addr;
 101 };
 102
 103 #define IRT_IOSAPIC_TYPE   139
 104 #define IRT_IOSAPIC_LENGTH 16
 105
 106 #define IRT_VECTORED_INTR  0
 107
 108 #define IRT_PO_MASK        0x3
 109 #define IRT_ACTIVE_HI      1
 110 #define IRT_ACTIVE_LO      3
 111
 112 #define IRT_EL_MASK        0x3
 113 #define IRT_EL_SHIFT       2
 114 #define IRT_EDGE_TRIG      1
 115 #define IRT_LEVEL_TRIG     3
 116
 117 #define IRT_IRQ_MASK       0x3
 118 #define IRT_DEV_MASK       0x1f
 119 #define IRT_DEV_SHIFT      2
 120
 121 #define IRT_IRQ_DEVNO_MASK      ((IRT_DEV_MASK << IRT_DEV_SHIFT) | IRT_IRQ_MASK)
 122
 123 #ifdef SUPPORT_MULTI_CELL
 124 struct iosapic_irt {
 125         struct iosapic_irt *irt_next;  /* next routing table */
 126         struct irt_entry *irt_base;             /* intr routing table address */
 127         size_t  irte_count;            /* number of entries in the table */
 128         size_t  irte_size;             /* size (bytes) of each entry */
 129 };
 130 #endif
 131
 132 struct vector_info {
 133         struct iosapic_info *iosapic;   /* I/O SAPIC this vector is on */
 134         struct irt_entry *irte;         /* IRT entry */
 135         u32     *eoi_addr;              /* precalculate EOI reg address */
 136         u32     eoi_data;               /* IA64: ?       PA: swapped txn_data */
 137         int     txn_irq;                /* virtual IRQ number for processor */
 138         ulong   txn_addr;               /* IA64: id_eid  PA: partial HPA */
 139         u32     txn_data;               /* CPU interrupt bit */
 140         u8      status;                 /* status/flags */
 141         u8      irqline;                /* INTINn(IRQ) */
 142 };
 143
 144
 145 struct iosapic_info {
 146         struct iosapic_info *   isi_next;       /* list of I/O SAPIC */
 147         void __iomem *          addr;           /* remapped address */
 148         unsigned long           isi_hpa;        /* physical base address */
 149         struct vector_info *    isi_vector;     /* IRdT (IRQ line) array */
 150         int                     isi_num_vectors; /* size of IRdT array */
 151         int                     isi_status;     /* status/flags */
 152         unsigned int            isi_version;    /* DEBUG: data fr version reg */
 153 };
 154
 155
 156
 157 #ifdef __IA64__
 158 /*
 159 ** PA risc does NOT have any local sapics. IA64 does.
 160 ** PIB (Processor Interrupt Block) is handled by Astro or Dew (Stretch CEC).
 161 **
 162 ** PA: Get id_eid from IRT and hardcode PIB to 0xfeeNNNN0
 163 **     Emulate the data on PAT platforms.
 164 */
 165 struct local_sapic_info {
 166         struct local_sapic_info *lsi_next;      /* point to next CPU info */
 167         int                     *lsi_cpu_id;    /* point to logical CPU id */
 168         unsigned long           *lsi_id_eid;    /* point to IA-64 CPU id */
 169         int                     *lsi_status;    /* point to CPU status   */
 170         void                    *lsi_private;   /* point to special info */
 171 };
 172
 173 /*
 174 ** "root" data structure which ties everything together.
 175 ** Should always be able to start with sapic_root and locate
 176 ** the desired information.
 177 */
 178 struct sapic_info {
 179         struct sapic_info       *si_next;       /* info is per cell */
 180         int                     si_cellid;      /* cell id */
 181         unsigned int            si_status;       /* status  */
 182         char                    *si_pib_base;   /* intr blk base address */
 183         local_sapic_info_t      *si_local_info;
 184         io_sapic_info_t         *si_io_info;
 185         extint_info_t           *si_extint_info;/* External Intr info      */
 186 };
 187 #endif
 188